Search Results

Search found 17958 results on 719 pages for 'local delivery'.

Page 572/719 | < Previous Page | 568 569 570 571 572 573 574 575 576 577 578 579  | Next Page >

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by develop7

  Preface: I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator tells "Logon failure" upon connect attempt. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by Develop7

  Intro I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 Problem But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator screams "Logon failure" upon connect attempt, and, respectively, fails to connect. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d Question So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• Disabling Skype automatic update

  - by user13267

  How to stop skype from searching or at least downloading update without consent? I want that annoying "Update skype now" dialog box that keeps popping up before I log in to Skype and after I log in to Skype from appearing at all. Few months ago this used to work: 1) C:\Users\”YourName”\AppData\Local\Temp folder. 2) Find the file called SkypeSetup.exe, and delete it. 3) Create a text file in the folder, rename it to SkypeSetup.exe 4) Right click on the new file you just created and ask for properties. 5) Next left click the security tab then left click the advanced button. 6) Now left click “Change Permissions” and then “Add”. Enter “Everyone” (without the quotes) where it sez’, “Enter the object name to select (examples):” and click “OK”. 7) Now check the “Deny” box for “Full control” and click “OK”. obtained from HERE, but now it seems this has stopped working. The worst part is Skype seems to download ~30MB of executable setup file without my knowledge before bugging me with the dialog box to update it, and there seems to be no direct way to disable this download. And disabling the skype updater service does not seem to work either. Is there any kind of patch or registry hack I can use to stop skype from auto updating? Or should I start looking for an alternative to Skype altogether?

  Read the article

• Perl EPIC Not recognising installed CPAN modules

  - by Recc

  Eclipse on a mac, was working fine adding new modules until I Installed Text::CSV_XS which Eclips doesn't recognise as added to @INC For instance use strict; use SOAP::Transport::HTTP; SOAP::Transport::HTTP::CGI->dispatch_to('C2FService')->handle; BEGIN { package C2FService; use vars qw(@ISA); @ISA = qw(Exporter SOAP::Server::Parameters); use SOAP::Lite; sub c2f { my $self = shift; my $envelope = pop; my $temp = $envelope->dataof("//c2f/temperature"); return SOAP::Data->name( 'convertedTemp' => ( ( ( 9 / 5 ) * ( $temp->value ) ) + 32 ) ); } } use SOAP::Transport::HTTP; is marked as error if I comment it out use SOAP::Lite; is in turn marked as an error, not found etc the usual if a module is not installed. Both are installed with CPAN and $ perl -c soap-test.pl post-code-check.pl syntax OK Perl is fine CPAN tests are all pass, the code works, only EPIC lags behind. $ pwd && ls /opt/local/lib/perl5/site_perl/5.12.4/SOAP Client.pod Lite Server.pod Constants.pm Lite.pm Test.pm Data.pod Packager.pm Trace.pod Deserializer.pod SOM.pod Transport Fault.pod Schema.pod Transport.pod Header.pod Serializer.pod Utils.pod And if I have use errors in the start of my files the rest of the source is not error checked..

  Read the article

• how to remove an entry from system tray?

  - by altvali

  I've searched for an answer to this one and I haven't found one yet. How do i remove a single item from Windows' System tray? I'm targeting Windows XP. Edit: This is not about preventing items from starting up. I want the program to keep running, I just need another script/program to remove the first one's entry from system tray. Second Edit: One approach that I can think of is to try to hide the intended app by modifying registry keys. On several test machines I've found some registry entries that match the System tray information at HKEY_USERS\something-that-looks-like S-1-5-21-682003330-1563985344-725345543-1003\Software\Microsoft\Windows\CurrentVersion\Explorer\TrayNotify with BalloonTip, IconStream and PastIconsStream containing systray information. The important one is IconStream. On other machines, these are found at hkey_classes_root/local/setting/software/microsoft/windows/currentversion/TrayNotify I'm quite sure there's no danger in changing those specific registries, but I don't know how to write code for that. Can anyone help me with the code and with confirming if this has the desired effect of hiding the systray icon for an active program?

  Read the article

• Rsync: General file/folder synchronization

  - by Rey Leonard Amorato

  I have a file server, which is in-charge of pulling a folder tree from multiple workstations on a daily basis. My current method for this is by using rsync, (which works pretty well provided directory names and/or files remain the same) however, when files are renamed or moved about within subdir1, rsync will copy them over to the server, creating duplicates. I have to manually find and delete extraneous files/folders that had been left on the server during previous syncs. Note that I cannot use rsync's --delete flag because any sync from a workstation will then mirror that particular folder tree, instead of merging them to the server. Visual diagram: Server: Workstation1 Workstation2 Workstation(n) Folder* Folder* Folder* Folder* -subdir1 -subdir1 -subdir1 -subdir(n) -file1 -file1 -file2 -file(n) -file2 -file(n) Is there a simple script (preferably in bash, nothing fancy) that can accomplish the deletion of the extraneous files/folders in the event a file is renamed or moved to a different subdir? Is there a different program, much like rsync that can accomplish this task autonomously and in a much simpler manner? I have looked at unison, but I did not like the fact that it keeps a local database for the syncing info. Any tips at all as to how I am supposed to tackle this? Thank you in advanced for your help. EDIT: I have tried unison just recently and I can safely say it is out of the question now. unison is a bi-directional synchronization tool and from my testing, it mirrors the files existing on the server to all workstations. - This is unwanted. preferably, i would want files/folders to stay within their respective workstations and just merge to the server. AKA uni-directional sync; but with renames/moves propagated to the server. I might have to look into Git/Mercurial/Bazaar as mentioned by kyle, but still unsure if they are fit for the job.

  Read the article

• can't ssh within LAN, but can connect from outside

  - by Patrick B.

  A strange issue: I have a desktop running Ubuntu 10.04 behind a Netgear WNR1000 router performing NAT. I would like to be able to ssh into the desktop from my laptop (running Windows 7 and Cygwin). When at home, both the desktop and the laptop are connected by wireless (the desktop is in a different room from the router). sshd seems to be running fine, since ssh localhost from the desktop works without trouble. Also, ssh my.ip.address from my laptop when it is not behind the router works fine (I am forwarding port 22 on the router to my desktop). However, ssh same.ip.address from within the LAN fails with "Connection refused". ssh 192.168.local.ip.address fails with a different message, "Connection timed out". I can connect if I first ssh to a machine outside the LAN. So far I haven't found anything with Google because with the search terms that seem like they would be relevant, the vast majority of people have the opposite problem - i.e., they can't connect from outside the LAN but can connect within it. I can port forward through a remote server when I'm at home, but this seems like a totally absurd way to connect two computers on the same home LAN. I have already tried stopping and starting sshd on the desktop. Any thoughts?

  Read the article

• Separate computers in my apartment can't communicate to each other?

  - by Razor Storm

  In my apartment, the management provides the building with a network connection. I have my computer plugged into the ethernet coming out of the walls, and my friend who also lives in the apartment building has his computer connected to a separate ethernet jack. As far as I know our two computers are not within a LAN, and ipconfig shows that we only have external ip addresses. The problem, then, appears when we attempt make direct communication between our computers. I have some hosting server set up on my machine, and my friend is unable to connect to it via my ip address. Other people who do not live in the apartment can connect fine. Ethernet adapter Local Area Connection: IPv4 Address. . . . . . . . . . . : 204.29.113.41 Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : 204.29.112.1 His ip: 204.29.113.104 Using a fulltunnel vpn doesn't help.

  Read the article

• Since upgrading to Windows 8.1, I can't open any files on a SMB share shared by my OS X Mavericks Mac

  - by Gary

  I have a PC with Windows 8.1 and a Mac with Mavericks. I have a folder on the Mac that is shared with the PC. When I'm on the PC and I try to open a file that is shared by the Mac, such as an ISO file (a disk image), then I get a message saying that I cannot open the file, or the file is in use (it depends on the app/filetype). I have the same problem when I open a video file. Strangely, text files and PDF files are just fine. And if I copy any of the problematic files to the local Windows disk, then I can open them just fine. The specific error messages are: AVI files opened in VLC: "Your input can't be opened. VLC is unable to open the MRL." ISO files opened by Windows Explorer: "Sorry, there was a problem mounting the file." This only started happening after I upgraded to Windows 8.1 on the PC and Mavericks on the Mac. Mavericks upgraded its SMB version from SMB1 to SMB2, so perhaps that is related? Does anyone know what the problem might be, and how I could fix it? Thanks in advance!

  Read the article

• Split Tunnel VPN using incorrect Tunnel

  - by Brian Schmeltz

  Our company has a handful of field offices that have recently been setup with a regular internet connection after we removed the T1 and router that connected them directly to our network. Now, when the users are in the office, they log in to the VPN to be able to connect to the network. For the sake of them being able to print and scan from the local multi-function we have setup a split tunnel VPN. We currently have about 15-20 users using this setup around the country without any problems. Recently one of our users started having problems accessing internal programs/sites when connecting from both home and the office. There are three other users in the same office and they do not have this problem. I assumed that it was something with the computer and went ahead and replaced it with another of the same model. The computer worked fine in our home office; however, when the user received it, she had the exact same problem both at home and in the field office. Thinking it may be a NIC driver issue I sent her another computer, this time a different model, same problem occurred. If I update the host file to point to the correct paths, things will work, and if I connect via a normal VPN connection everything works, but the user cannot scan or print - which is a problem. Have tried to find ways to create another tunnel on a normal VPN and have tried to find ways to force the correct tunnel on the split tunnel VPN. It appears that there is something related to the ISP because if I connect to Comcast or Verizon it is fine but once she connects to Insite then she has problems. I have been unable to get any support from Insite as they don't feel the issue is with them. We use a Nortel VPN client. Any thoughts or ideas would be appreciated.

  Read the article

• Can't login via ssh after upgrading to Ubuntu 12.10

  - by user42899

  I have an Ubuntu 12.04LTS instance on AWS EC2 and I upgraded it to 12.10 following the instructions at https://help.ubuntu.com/community/QuantalUpgrades. After upgrading I can no longer ssh into my VM. It isn't accepting my ssh key and my password is also rejected. The VM is running, reachable, and SSH is started. The problem seems to be about the authentication part. SSH has been the only way for me to access that VM. What are my options? ubuntu@alice:~$ ssh -v -i .ssh/sos.pem [email protected] OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /home/ubuntu/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to www.hostname.com [37.37.37.37] port 22. debug1: Connection established. debug1: identity file .ssh/sos.pem type -1 debug1: identity file .ssh/sos.pem-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: RSA 33:33:33:33:33:33:33:33:33:33:33:33:33:33 debug1: Host '[www.hostname.com]:22' is known and matches the RSA host key. debug1: Found key in /home/ubuntu/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: .ssh/sos.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password [email protected]'s password: debug1: Authentications that can continue: publickey,password Permission denied, please try again.

  Read the article

• error creating MS Exchange distribution list: Active directory response: 00000005: SecErr: DSID-031521D0

  - by BabakBani

  We've migrated a client from google apps to an MS Exchange 2010 SP2 on-premise setup. The setup /prepareAD went well, and the software was installed with the Administrator account. We've used the Exchange Management Console to setup mailboxes and had to google up the appropriate workarounds such as going into each users Advanced Security Settings and selecting "include inheritable permissions from this object's parents", and changing their logon-to from specific machines to "all computers" so that they can connect to Outlook Web Access, and in turn so their Outlook 2007-2010 clients can connect to Exchange. Sending and receiving emails are working well. Now that all this is in place, we can create Dynamic Distrubution Lists with no problem, but as soon as we try and create a DISTRIBUTION LIST, either in the EMC or the Exchange PowerShell, we get an error. As the error message in the powershell is more verbose, I include this if anyone can suggest how we remedy this: [PS] C:\Windows\system32new-DistributionGroup -Name 'projects' -SamAccountName 'projects' -Alias 'projects' Active Directory operation failed on DC.cppe.local. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031521D0, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0 + CategoryInfo : NotSpecified: (0:Int32) [New-DistributionGroup], ADOperationException + FullyQualifiedErrorId : 1EA5CD3E,Microsoft.Exchange.Management.RecipientTasks.NewDistributionGroup

  Read the article

• Can't resolve offline file conflicts

  - by Bryan

  We use roaming profiles on our Server 2008 R2 domain, with folder redirection for 'desktop', 'my documents' and 'application data'. But as our network is split across two sites, we have one file server at each site, which are configured to use domain based DFS namespaces and DFS replication to keep things in sync. The DFS path for the replication folder is as follows: \\domain\folderredirection$\<username>\<redirected-folder-name> The real paths are \\site-1-server\folderredirection$\<username>\<redirected-folder-name> and \\site-2-server\folderredirection$\<username>\<redirected-folder-name> As our users all switch between sites (sometimes several time per day), our folder redirection policy has to redirect to the DFS roots rather than hardcoded to a specific server. Both DFS and DFS-R have been proven to be working perfectly. On our laptops, we use offline files for the redirected folders, and this also works fine, however the problem is as follows: When conflicts occur in offline files, it is impossible to resolve the conflicts. I'm given the usual conflict resolution options (i.e. 'Ignore', 'Keep Both', 'Keep network' and 'Keep local'), however, not one of these options will resolve any conflict, yet no error is produced. We only use offline files on laptops, which have either Windows XP Professional or Windows 7 Professional installed. The problem is not specific to any one laptop, it affects every laptop and every conflicting file in exactly the same way. I would have thought the set up we have is common for companies that have multiple sites, so I'm hoping someone will have seen this before?

  Read the article

• Domain joined computer unable to access servers through VPN

  - by kscott

  Our servers are in a virtual off site hosting center, our office has a vpn connection to the data center, but for reasons I don't understand we also have to connect to the Citrix Access Gateway (CAG) client in order to access the servers. I am a programmer with rather limited ops knowledge including a weak grasp of networking and terminology. Bear with me. I was just given a new laptop, which is a 64 bit Windows 7 system unlike my previous 32 bit Windows XP desktop which was able to connect without issue. My laptop has been joined to the domain so that I login with my AD credentials, I am able to connect to the CAG and get authenticated, and after doing this I can ping our servers and they resolve to the correct internal IP addresses, but I am unable to use remote desktop to the servers, connect to SQL servers through my local SQL Management Studio, navigate to them through the file system, or view any of our internal intranet websites. All of which I was able to do previously. I have tried turning off my Windows firewall and the problem remains, the DNS servers are set to the correct IPs of our domain controllers, and the ops guys here are a little stumped. Does any one have any suggestions?

  Read the article

• JBoss7 load balancing with mod_proxy_balancer - session not working

  - by Phil P.

  I am trying to set up mod_proxy_balancer for routing requests to 2 jboss7-servers. For the time being I am testing this setup on my local machine, using following config in httpd.conf: ProxyRequests Off <Proxy \*> Order deny,allow Deny from all </Proxy> ProxyPass / balancer://mycluster/ stickysession=JSESSIONID|jsessionid scolonpathdelim=On <Proxy balancer://mycluster> BalancerMember http://localhost:8080 route=node1 BalancerMember http://localhost:8081 route=node2 Order allow,deny Allow from all </Proxy> and in the standalone.xml file of each jboss I have defined the jvmRoute system property: <system-properties> <property name="jvmRoute" value="node1"/> </system-properties> At http:// localhost/myapp the application is accessible but the java-session is not build up correctly. Consequently the authentication is not working. The funny thing is, that everything is working if I turn off one JBoss-instance. As I have tried a couple of settings already, I am thankful for any further suggestions.

  Read the article

• Permissions on mac for itunes library with multiple users - idea

  - by John

  I currently have a lot of music on an external drive and my itunes set up from there. However, periodically, when the external drive isn't connected, itunes will default back to the library location of my home directory user path. I don't want to mess with an external drive, as my mac HD is large enough to house the music collection. However, I have 4 family members - all with their own logins - using this same gob of music. I don't want 4 copies of the library, only one with all libraries referencing it. So, what I want to do is: 1 - move all music files to a shared directory at /Macintosh HD/users/music. I created this directory and adjusted permissions, so all four users can read and write to this directory. 2 - get all four accounts to reference this library instead of the external or local home locations I am hoping I can just check the box to keep library organized in my account, which is the admin and let itunes move it all. Then delete current libraries for each account and re-add from the new shared location. Will the itunes organization process cause permissions issues either by setting permissions to all the files access to my account only or write permissions or any other 'gotcha'? I am having a hard time coming up with a smooth solution that won't break everything and cause me to have mega duplicates or access issues. I would prefer not to do any xml library file editing if possible. Am I dreaming? Thanks for help.

  Read the article

• Creating a ssh tunnel to transfer files?

  - by Vincent

  For me, networks are a very "opaque" thing, and even with reading a lot of tutorial about SSH, I do not understand how to create a basic tunnel to transfer my files. The configuration is the following : My Computer --[Internet]--> Bridge Machine --[Local Network]--> Final Machine Currently I do the following : 1) Connect to the Bridge Machine with : ssh -X [email protected] 2) Connect to the Final Machine with : ssh -X username@finalmachine 3) I copy the address of files I need (for example .../mydirectory) 4) Then I deconnect from the finalmachine with : exit 5) I copy the files to the bridge : scp -r username@finalmachine:/.../mydirectory . 6) I deconnect from the bridge with : exit 7) I copy the files to my machine : scp -r [email protected]:/.../mydirectory . Which is quite complicated. My question is basic : how to simplify this using a SSH tunnel ? (and please explain me the signification of each command line you write, to understand what each line really do and to avoid to use it like a magical thing. Furthermore if some ports number are used, explain me if I can pick a completely random number or if I have to choose a specific one.)

  Read the article

• Can't connect to public WiFi with MacBookPro at coffee shops and libraries

  - by Nathan Bowers

  The Problem: I can't connect to public, unencrypted WiFi at my local public library or Peets Coffee. My Setup: Late 2006 MacBookPro running 10.5.8. I have Parallels installed. It's supposed to work like this: 1) Connect to their unencrypted WiFi network 2) Open a browser which redirects you to their "enter password/agree to terms" page. 3) Browse normally. I can connect to the WiFi network, but when I try to authenticate I always get stuck in a redirect loop. It's been like this for a while. Even before I upgraded to 10.5.8. I never have trouble with encrypted networks or regular open WiFi. What I've tried: Disabling Parallels connections in Network Prefs. Superstition: somehow Parallels installed something in the network stack that's messing me up. Pinging the IP address of the WiFi node I'm connected to. I can ping it, it's there, but I still get stuck in this authentication redirect loop. Tried different browsers, tried different cookie and security settings. Even tried IE under Parallels. No dice. Tried flushing DNS cache. Asked library and coffee employees for help. It didn't go well. My Question: Anybody else have this problem? What should I be looking for?

  Read the article

• Reporting Services 2008: Virtual directories not visible in IIS7..

  - by Ryan Barrett

  I'm having some problems with Reporting Services on Windows Server 2008 Standard. I've installed server 2008 as a standalone webserver (with roles/features of an web application server). On top of that, I've installed Sql Server 2008 Standard with Reporting Services (and the rest of the BI tools). Problem is, I want to modify the rights on the virtual directories. However, the virtual directories aren't appearing in IIS 7 management tool. I can connect to reporting services, albeit only with the local windows admin account. I can download Report Builder fine from an session on the server (but not from any clients). I've tried removing the default website from IIS, and that stops the reporting services website from working. The machine (a VM) isn't for production use - it's used on a closed network internally for testing and development purposes. I need to be able to let my fellow developers login without a password, and they must be able to install ReportBuilder 2.0. Must not be linked to a domain or active directory in any form. Google isn't much help, the results suggest I modify the virtual directory Does anyone have any suggestions?

  Read the article

• How to migrate a running KVM (with full disk copy) to another node?

  - by klipz

  I'm doing tests on KVM, and I'd like to see if I can make a hot migration, I mean the virtual machine won't stop running during the migration (but a few seconds of freeze is ok). I use a small cluster for my test : kvm1, kvm2, and kvmnfs. kvm1 and kvm2 runs the virtual machines kvmnfs is a NFS server, and it's mounted on /KVM on both kvm1 and kvm2 To migrate a VM (only RAM in fact) from kvm1 to kvm2, I run the same kvm command on kvm2 (with -incoming tcp:0:4444) that on kvm1, then I use "migrate -d tcp:kvm2:4444" : It works great, since the VM file is common to both machines. Now, I wan't to make a full migration (RAM + disk) of a local VM file (no more NFS) of kvm1 to kvm2. I tried to create an empty file, with touch, on kvm2 and use the same kvm command line + the "-incoming ..."). Then on kvm1 I use "migrate -d tcp:kvm2:4444" : It copies everything, then... the VM fails (any I/O disk gives an I/O error) ! And my VM file on kvm2, the one I created with touch, as still a size of 0 bytes. What am I doing wrong ? What is the exact command to use on kvm2 ? And what is the command to launch, in the monitoring mode, on kvm1 ?

  Read the article

• ipv6 : why ndp resolves to global scope address?

  - by Julien

  I'm facing a strange ipv6 behavior and I don't know how to solve it because I'm not familiar with ipv6. Maybe this behavior is normal. I hope that you will help me. ( I'm running under debian 6.0.9 with a custom kernel 3.2.58 ) machine A is "2a00:7d30:edf6:100::1" wants to ping machine B, which is "2a00:7d30:edf6:100::10". Both are on the same segment. machine A asks for the address of machine B and I don't understand why machine B gives its global scope address instead of the local scope one ? 10:59:02.082785 IP6 2a00:7d30:edf6:100::1 ff02::1:ff00:10: ICMP6, neighbor solicitation, who has 2a00:7d30:edf6:100::10, length 32 10:59:02.082821 IP6 2a00:7d30:edf6:100::10 2a00:7d30:edf6:100::1: ICMP6, neighbor advertisement, tgt is 2a00:7d30:edf6:100::10, length 32 after that machine A pings the global scope address of machine B and it works fine : 10:59:02.082927 IP6 2a00:7d30:edf6:100::1 2a00:7d30:edf6:100::10: ICMP6, echo request, seq 1, length 64 10:59:02.082960 IP6 2a00:7d30:edf6:100::10 2a00:7d30:edf6:100::1: ICMP6, echo reply, seq 1, length 64 Thank you for you help best regards Julien

  Read the article

• OSX Server 10.5 - Cannot log into Workgroup Manager - diradmin password is correct

  - by Mister IT Guru

  I've got a setup where I am trying to rescue a broken AD. We can no longer authenticate on the Workgroup manager, with passwords being rejected all the time - even though it is correct. I can connect using the workgroup manager on another server and I get the user list as expected, but when I click the padlock to make changes, I get the following screen: The problem is, I know the password is correct, I just used it to connect to the server in the first place. I can log into the server using the local admin, and services such as AFP, VPN and SMB continue to serve users. I have about 300 or so users on this server, and I would very much like to avoid having a rebuild. As there is much configuration that has been done without my knowledge (it's a client machine), I'd like to attempt to fix it, and then create another server and migration OD off this broken machine, then decommission it "gently". Ultimately this would mean no disruption of services. What I'd like it some tips as to how to fix the problem with authenticating to make changes in the work group manager, and maintenance on open directory in general. Thanks

  Read the article

• Cannot send email outside of network using Postfix

  - by infmz

  I've set up an Ubuntu server with Request Tracker following this guide (the section about inbound mail would be relevant). However, while I'm able to send mail to other users within the network/domain, I cannot seem to reach beyond - such as my personal accounts etc. Now I have no idea what is causing this, I thought that all it takes is for the system to fetch mail through our exchange server and be able to deliver in the same way. However, that hasn't been the case. I have found another server setup in a similar fashion (CentOS 5, Request Tracker but using Sendmail), however it is a dated server and whoever's built it has kindly left no documentation on how it works, making it a pain to use that as a reference system! :) At one point, I was told I need to set up a relay between the local server's email add and our AD server but this didn't seem to work. Sorry, I know next to nothing about mailservers, my colleagues nothing about Linux so it's a hard one for me. Thank you! EDIT: Result of postconf -N with details masked =) alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 mydestination = myhost.mydomain.com, localhost.mydomain.com, , localhost myhostname = myhost.mydomain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = EXCHANGE IP smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes Sample log message: Sep 4 12:32:05 theedgesupport postfix/smtp[9152]: 2147B200B99: to=<[email protected]>, relay= RELAY IP :25, delay=0.1, delays=0.05/0/0/0.04, dsn=5.7.1, status=bounced (host HOST IP said: 550 5.7.1 Unable to relay for [email protected] (in reply to RCPT TO command))

  Read the article

• cannot log into mysql locally

  - by Lostsoul

  When I try to log into mysql locally using the command: mysql -u root -p I get this error: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) I can access the server remotely(not as root) and my web pages are using the mysql fine, but locally I cannot log on(which I need because I need to create some users). Only change I made was to attach another drive to the server and move the sql data there. Here's my.cnf [mysqld] datadir=/media/ephemeral0/data/mysql socket=/media/ephemeral0/data/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 # adding more config skip-external-locking long_query_time=1 slow_query_log slow_query_log_file=/var/log/log-slow-queries.log log-bin=mysql-bin server-id= 1 [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid myisam_recover_options I read I need to edit the socket info in my.cnf to make sure it points to the right socket file..I double checked and the file exists(although it starts with an S when I do ls -l "srwxrwxrwx 1 mysql mysql 0 Jun 21 03:43 mysql.sock"). I'm not really sure how to resolve this. I have tried to reboot and ran yum update to make sure I was running the latest packages. Please help!

  Read the article

• cfengine3 file_copy only on source side change

  - by megamic

  I am using the 'digest' copy method for all file copy promises, because of the way we package and deploy software, I cant rely on mtime for the criteria for updating files. For various reasons, I am not employing the client-server approach with a central configuration server: rather we package and deploy our entire configuration module to each server, so from cf-engine's perspective, the source and target are local on the server it is running. The problem I am having with this approach is that the source will always update the target when they differ - which is what I want most of the time, usually because the source has been updated. However, like many other cfengine users, we are running an operational environment, where occasionally emergency fixes have to be applied immediately - meaning we don't have time to rebuild and redeploy a configuration module, and the fix will often be applied by deploying a tarball with specific changes. Of course this is problematic if cf-engine comes along 5 mintues later and reverts the changes. What we would like is to be able to make small, incremental changes to our servers, without them being reverted, until the next deployment cycle at which time the new source files would be copied. We do not consider random file corruption or mistaken changes to involve enough risk to warrant having cfengine constantly revert deployments to their source copy - the ability to deploy emergency fixes and have them stay that way until the next deployment would be of much greater value and utility. So, after all that, my question is this: is cf-engine capable of detecting whether it was the source or target that changed when the files differ, and if so, is their a way to use the 'digest' copy method but only if the source side changed? I am very open to other ideas and approaches as-well, as I am still quite new to this whole configuration management thing.

  Read the article

< Previous Page | 568 569 570 571 572 573 574 575 576 577 578 579  | Next Page >