Search Results

Search found 22447 results on 898 pages for 'cpu load'.

Page 573/898 | < Previous Page | 569 570 571 572 573 574 575 576 577 578 579 580  | Next Page >

  • IRQ Conflicts Causing Video Card and Boot Problems?

    - by sanpatricio
    tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

    Read the article

  • Limiting calls to WCF services from BizTalk

    - by IntegrationOverload
    ** WORK IN PROGRESS ** This is just a placeholder for the full article that is in progress. The problem My BTS solution was receiving thousands of messages at once. After processing by BTS I needed to send them on via one of several WCF services depending on the message content. The problem is that due to the asynchronous nature of BizTalk the WCF services were getting hammered and could not cope with the load. Note: It is possible to limit the SOAP calls in the BtsNtSvc.exe.Config file but that does not have the desired results for Net-TCP WCF services. The solution So I created a new MessageType for the messages in question and posted them to the BTS messaeg box. This schema included the URL they were being sent to as a promoted property. I then subscribed to the message type from a new orchestraton (that does just the WCF send) using the URL as a correlation ID. This created a singleton orchestraton that was instantiated when the first message hit the message box. It then waits for further messages with the same correlation ID and type and processs them one at a time using a loop shape with a timer (A pretty standard pattern for processing related messages) Image to go here This limits the number of calls to the individual WCF services to 1. Which is a good start but the service can handle more than that and I didn't want to create a bottleneck. So I then constructed the Correlation ID using the URL concatinated with a random number between 1 and 10. This makes 10 possible correlation IDs per URL and so 10 instances of the singleton Orchestration per WCF service. Just what I needed and the upper random number is a configuration value in SSO so I can change the maximum connections without touching the code.

    Read the article

  • Vim: How to install plugin for a particular filetype?

    - by ronnie
    Yesterday I came across jedi-vim plugin which provides auto-completion for python. I installed the plugin using pathogen by placing it in bundle directory and it is working fine. Now, as I have mentioned that this plugin is only for filetype: python so I want to load it only when I open files with .py extensions and not when I open other files like .java, .perl, .sh. So, how can this be achieved. I am a vim beginner/noob but I googled before asking and found that this can be achieved using vim ftplugin but I have no idea whatsoever where to place which file.

    Read the article

  • Pandaboard crash on startup or freeze after minutes

    - by Meach
    I just received my Pandaboard ES (rev B) and I am having trouble after installing ubuntu-omap4-addons. Once I copied the image ubuntu-12.04-preinstalled-desktop-armhf+omap4.img on my sd card and boot the pandaboard with it, I run the following commands: sudo add-apt-repository ppa:tiomap-dev/release sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install ubuntu-omap4-extras At the end of the installation of ubuntu-omap4-extras, Ubuntu tells me that a problem occurs when the console displays: ldconfig deferred processing now taking place Clicking on "report the problem" tell me that the problem concerns pvr-omap4-dkms. I read somewhere that this can happen and it is better to reinstall pvr-omap4-dkms. Which I am doing by running: sudo apt-get install --reinstall pvr-omap4-dkms I reboot. Then the board has sometimes difficulties to start Ubuntu: it freezes during the loading page, only action I can do is unplugging the board to start it again. Some other times, Ubuntu load successfully but then freeze at another random time, in the range 20 - 40 minutes. I searched on internet for similar bug and found this: https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/971091 So I typed this in: update-rc.d ondemand disable apt-get -y install cpufrequtils echo 'ENABLE="true" GOVERNOR="performance" MAX_SPEED="0" MIN_SPEED="0"' > /etc/default/cpufrequtils cpufreq-set -r -g performance reboot But it doesn't seems to fix the bug. Another detail: on startup, before the loading screen of Ubuntu (when there is the two penguins displayed :)), it shows this: [0.297271] CPU1: Unknown IPI message 0x1 [0.308990] omap_hwmod: mcpdm: _wait_target_ready error: -16 [0.354705] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [0.354766] omap_hwmod_mux_init: Could not allocate device mux entry [2.107086] thermal_get_slope:Getting slope is not supported for domain gpu [2.107116] thermal_get_offset:Getting offset is not supported for domain gpu [2.107299] stm_fw: vendor driver stm_ti1.0 registered [8.725555] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 Any idea what can be wrong? I am not that good with Ubuntu so any help will be appreciated. Cheers! Meach

    Read the article

  • Opengl + SDL linking error

    - by me2loveit2
    I am trying to load an image as a texture with opengl using c++ in visual studio 2010. I researched a couple hours online and found the SDL library, then I implemented a simple example and got some linking error I can not seem to figure out. The error log is here: 1Build started 10/20/2012 12:09:17 AM. 1InitializeBuildStatus: 1 Touching "Debug\texture mapping test.unsuccessfulbuild". 1ClCompile: 1 All outputs are up-to-date. 1 texture mapping test.cpp 1ManifestResourceCompile: 1 All outputs are up-to-date. 1texture mapping test.obj : error LNK2019: unresolved external symbol _IMG_Load referenced in function "void __cdecl display(void)" (?display@@YAXXZ) 1MSVCRTD.lib(crtexe.obj) : error LNK2019: unresolved external symbol main referenced in function __tmainCRTStartup 1C:\Users\Me\Documents\Visual Studio 2010\Projects\Programming projects\texture mapping test\Debug\texture mapping test.exe : fatal error LNK1120: 2 unresolved externals 1 1Build FAILED. 1 1Time Elapsed 00:00:02.45 ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ========== Can someone please help me!! I am at a desperate point right now. I downloaded the SDL, and copied all the .h file into: C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Include I added the .lib (x86) files into://as a not i tried the (x64) file too but got the exact same error C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Lib and the .dll(x86) into: C:\Windows\System32 For implementing textures, I used the simple sample code from: http://www.sdltutorials.com/sdl-tip-sdl-surface-to-opengl-texture Please let me know if you can see me doing something wrong, or know how I can fix this!! Thanks Phil

    Read the article

  • Additional new material WebLogic Community 2013

    - by JuergenKress
    Load Balancing T3 Initial Context Retrieval for WebLogic using Oracle Traffic Director Demystifying WebLogic and Fusion Middleware Management WebLogic Server- Integrated & Optimized w/ Best of Breed Oracle Offerings to Turbo Charge your Applications Get a Bird’s-Eye View of IT Architecture: IT Strategies from Oracle IT Strategies from Oracle, a complimentary authorized library of guidelines and reference architectures, can help you put together a strong IT architecture that takes into account individual technology components as well as big-picture IT concepts and strategies. Read More. Deploying Oracle Application Development Framework Applications on Oracle Java Cloud Service and Oracle Database Cloud Service With the new Oracle Cloud environment you no longer have to maintain an Oracle WebLogic server or a database server of your own – you can instead use instances hosted on Oracle Cloud. More Oracle Application Development Framework Development with Eclipse Oracle Enterprise Pack for Eclipse now provides even more Oracle Application Development Framework tooling with each release. Check out this new tutorial on Oracle Enterprise Pack for Eclipse 12.1.1.2. Oracle WebLogic Devcast Series Join us for the March 28 Oracle WebLogic Devcast Webcast, “What to Expect from Maven on Oracle WebLogic,” featuring Pyounguk Cho, Oracle’s principal product manager. Learn what developers can expect when utilizing Apache Maven with Oracle WebLogic. Customer Webcasts: WebLogic Devcast Series – Register Leveraging Third-Party Libraries to Create and Deploy Applications to Oracle Cloud Oracle ADF: Tuning Application Module Pools and Connection Pools WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • There is a porn domain pointing to my site

    - by Nicolas Martel
    Let's say example.com is my real site, and fooexample.com is the porn site. fooexample.com are pointing to my ip. Now you could think, just don't mind it right. Well the thing is that they are driving load of traffic. Not only that, but my main domain example.com become unavailable after a couple of minutes and the only domain that work is either fooexample.com or none of those 2. What i have done so far was using mod_rewrite to redirect the porn site to google but my domain still become unavailable. Blocking the ips served no result either. I hope someone will be able to help me because this is a huge problem right now. Thanks.

    Read the article

  • startx error no desktop manager

    - by WikiWitz
    I have Backtrack 5R2 KDE. I started recovery mode and did a failsafe xorg configuration. After that, I cannot load the KDE manager when I enter the startx command after logging in. Whenever I do a startx command (as root), the result resembles the following: This is not the actual output (I just drew this with MS paint because I cannot do a printscreen). The screen is just black with the icon in the upper left corner. The other pop-up menu appears when left-clicking the mouse. I tried the cp xorg.conf.failsafe xorg.conf advice from other websites with no luck. I have also tried the 'reconfigure option(s)' form the recovery mode with no success.

    Read the article

  • ARM Debian (squeeze) USB driver with mismatch 3.3.3 kernel but /lib/modules/2.6.36

    - by frank
    Hei guys, my sheevaplug embedded server works fine, but when I wanted to use USB, the device gets not attached to /dev/tty/USB0 lsusb shows correctly: Bus 001 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port an modprobe usbserial raises: FATAL: Could not load /lib/modules/3.3.3/modules.dep: No such file or directory in the /lib/modules/ Folder there is instead a 2.6.36-Folder uname -r gives 3.3.3 How can I overcome this mismatch? Can I create a symlink? I can't flash this embedded device since it is deployed somewhere, only ssh? Please advise!

    Read the article

  • Why's SMC failing on startup?

    - by Brian Knoblauch
    Trying to remove a user from one of our servers, but I seem to be thwarted at every turn... SMC refuses to load the user list (failing with a NoClassDefFoundError in the listAll method of UserContent). vipw just returns with "vipw: /etc/passwd file busy". I'm the only user on the system at the moment (it's our backup SRSS box), and both of these fail even right after a reboot. I don't have console access at the moment either unfortunately (or I would try single user mode). Of course, even if init mode S worked and let me do this one task, it doesn't solve the root problem. Ideas?

    Read the article

  • Can PuTTY be configured to display the following UTF-8 characters?

    - by Stuart Powers
    I'd like to be able to render the characters as seen in this tweet: I saved the tweet's JSON data and wrote a one-liner python script for testing. python -c 'import json,urllib; print json.load(urllib.urlopen("http://c.sente.cc/BUCq/tweet.json"))["text"]' This next image shows the output of this command on two different putty sessions, one with Bitstream Vera Sans Mono font and the other is using Courier New: Next is an example of correct output (I wasn't using PuTTY): The original JSON is at this link using Twitter's API. How can I get PuTTY to display those characters?

    Read the article

  • Different graphic cards drivers while booting from external media

    - by goran
    I am booting a certain system of mine with ubuntu 9.10 from external HDD. I am satisfied with the setup and it works fine, however I would like to modify it so that I can choose which graphic card drivers to load during the boot time. Specifically I would like to choose between: nvidia proprietary driver ati proprietary driver generic driver Currently if I am using proprietary drivers then dont boot into X, delete xorg.conf, start gdm and reconfigure the system using jockey (for hardware drivers). What would be the steps to make this (semi-)automatic and avoid restarting X?

    Read the article

  • Soft sound problem on Sony Viao NetBook in GTalk and GMail Chat

    - by mx4399
    I have a new Sony Viao netbook and have a problem with the sound - or lack of loudness thereof. When using GTalk or chat in GMail with earphones all is OK but when using the netbooks' built in speakers the sound is very very faint (also in the GMail Chat test section). I installed the Sony sound drivers and checked all the sound settings, VLC also plays music at an acceptable level but still not as load as my old MacBook did. All settings are set at 100% - but are still too much too soft to use. Anyone got an idea?

    Read the article

  • Apache2 server does not start cannot pen shared object file

    - by sid__
    I am working with Apache and Passenger for a Rails project. And a during a restart I got the following error Cannot load /usr/lib/ruby/gems/1.8/gems/passenger-2.2.11/ext/apache2/mod_passenger.so into server: /usr/lib/ruby/gems/1.8/gems/passenger-2.2.11/ext/apache2/mod_passenger.so: cannot open shared object file: No such file or directory However there is no change in the apache configuration file. I have attached the snippet from the conf file 287 LoadModule passenger_module /usr/lib/ruby/gems/1.8/gems/passenger-2.2.11/ext/apache2/mod_passenger.so 288 PassengerRoot /usr/lib/ruby/gems/1.8/gems/passenger-2.2.11 289 PassengerRuby /usr/bin/ruby1.8 I am also unable to locate the shared object file in the location pointed to by the server though I am not really sure how the .so file is works (created/destroyed) I would also appreciate it if someone could explain to me what exactly has happened. I understand the shared object file is mission, what could be the reason it got deleted.

    Read the article

  • 'Buy the app' landing page implementations: redirect or javascript popup?

    - by benwad
    My site (using Django) has an app that I'm trying to push - I currently have a piece of middleware that redirects the user to a page advertising the app if they're accessing the page on the iPhone, then setting a cookie so that the user isn't bugged by the message every time they visit the site. This works fine, however checking the page with the mobile Googlebot checker shows that the Googlebot gets stuck in the redirect (since it doesn't store cookies) and therefore won't index the proper content. So, I'm trying to think of an alternative implementation that won't hurt the site's Google ranking and won't have any other adverse effects. I've considered a couple of options: Redirect (the current solution), but don't redirect if the user agent matches the Googlebot's UA string. This would be ideal, however I'm not sure if Google like their bot being treated differently from other users, and I'm afraid the site's ranking may be somehow penalised if I go ahead with this. Use a Javascript popup instead of a redirect. This would make sure the Googlebot finds the content it needs, however I envision this approach causing compatibility issues with the myriad mobile devices/browsers out there, and may affect the page load time. How valid are these options? And is there a better option for implementing this feature out there? I've tried researching this topic but surprisingly can't find any reputable-looking blog posts that explore this topic.

    Read the article

  • What's static.ak.fbcdn.net that appears on the status bar of my browser everytime Facebook is loading?

    - by Maverick
    I find the message: "waiting for static.ak.fbcdn.net..." on the status bar of my browser everytime I load Facebook and many a times even while loading other websites. I searched on net and found out that static.ak.fbcdn.net stands for static akamai facebook content delivery network. I reckon that static.ak.fbcdn.net is the server URL from where Facebook delivers contents to our browser. Am I right? Can anyone elaborate? Also, why does the above mentioned message appear while loading other websites too?

    Read the article

  • Embedded Tomcat Cluster

    - by ThreaT
    Can someone please explain with an example how an Embedded Tomcat Cluster works. Would a load balancer be necessary? Since we're using embedded tomcat, how would two separate jar files (each a standalone web application with their own embedded tomcat instance) know where eachother are and let eachother know their status, etc? Here is the code I have so far which is just a regular embedded tomcat without any clustering: import javax.servlet.ServletException; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import java.io.File; import java.io.IOException; import java.io.Writer; public class Main { public static void main(String[] args) throws LifecycleException, InterruptedException, ServletException { Tomcat tomcat = new Tomcat(); tomcat.setPort(8080); Context ctx = tomcat.addContext("/", new File(".").getAbsolutePath()); Tomcat.addServlet(ctx, "hello", new HttpServlet() { protected void service(HttpServletRequest req, HttpServletResponse resp) throws ServletException, IOException { Writer w = resp.getWriter(); w.write("Hello, World!"); w.flush(); } }); ctx.addServletMapping("/*", "hello"); tomcat.start(); tomcat.getServer().await(); } } Source: java dzone

    Read the article

  • Sample domain model for online store

    - by Carel
    We are a group of 4 software development students currently studying at the Cape Peninsula University of Technology. Currently, we are tasked with developing a web application that functions as a online store. We decided to do the back-end in Java while making use of Google Guice for persistence(which is mostly irrelevant for my question). The general idea so far to use PHP to create the website. We decided that we would like to try, after handing in the project, and register a business to actually implement the website. The problem we have been experiencing is with the domain model. These are mostly small issues, however they are starting to impact the schedule of our project. Since we are all young IT students, we have virtually no experience in the business world. As such, we spend quite a significant amount of time planning the domain model in the first place. Now, some of the issues we're picking up is say the reference between the Customer entity and the order entity. Currently, we don't have the customer id in the order entity and we have a list of order entities in the customer entity. Lately, I have wondered if the persistence mechanism will put the client id physically in the order table, even if it's not in the entity? So, I started wondering, if you load a customer object, it will search the entire order table for orders with the customer's id. Now, say you have 10 000 customers and 500 000 orders, won't this take an extremely long time? There are also some business processes that I'm not completely clear on. Finally, my question is: does anyone know of a sample domain model out there that is similar to what we're trying to achieve that will be safe to look at as a reference? I don't want to be accused of stealing anybody's intellectual property, especially since we might implement this as a business.

    Read the article

  • How do you debug why Windows is slow?

    - by aaron
    I've got Vista Biz and when my machine chugs I think it is because of paging, but I never know how to verify this. Procexp doesn't seem to provide useful information because it appears that nothing is going on when the chugs happen. perfmon seems like it has the counters I need, but I'm never sure what counters I should add to cover the information I want. For perfmon, I prefer numbers that are percents, so I can gauge load. Here are the counters I have up, but they don't always seem to correlate to chugs: - % disk time (logical) - page faults/sec (an indicator of lots of paging activity) - processor/%priviliged time

    Read the article

  • how to figure out why sites on my server aren't loading

    - by Derek
    I seem to randomly receive "page cannot load, cannot connect to server" errors for sites on one of my servers. when this happens, it seems to only happen on certain IPs or IP ranges at a time. I say this because while I'll get the error from my home laptop I'll be able to access the site fine from my work computer or from an offsite VPS. DNS records should already be fully propagated as these records were updated months ago. I have no idea how to diagnose what's going on. Is there a tool in cpanel or outside on the web that can help me figure out what's going on?

    Read the article

  • How do I setup a local DNS server on Mac OS Lion?

    - by Peter Kovacs
    I had some serious lag to resolve website address and sometimes things simply wouldn't load (pages kept loading for 5+ minutes without even a timeout error). So I had setup a local dns server/cache using BIND on Leopard and Snow Leopard. Now that I have Lion, i have the same problem, but the instructions no longer apply to Lion and I can't find a way to do it. Has anyone attempted to do this? Are there viable alternatives for DNS servers on OS X 10.7? For those who are wondering I already tried several external DNS server. Only my computer has this issue on the network.

    Read the article

  • A fix for the design time error in MVVM Light V4.1

    - by Laurent Bugnion
    For those of you who installed V4.1 of MVVM Light and created a project for Windows Phone 8, you will have noticed an error showing up in the design surface (either in Visual Studio designer, or in Expression Blend). The error says: “Could not load type ‘System.ComponentModel.INotifyPropertyChanging’ from assembly ‘mscorlib.extensions’” with additional information about version numbers. The error is caused by an incompatibility between versions of System.Windows.Interactivity. Because this assembly is strongly named, any version incompatibility is causing the kind of error shown here (for an interesting discussion on the strong naming issue, see this thread on Codeplex). I managed to resolve the issue for Windows Phone 8 and will publish a cleaned up installer next week. In the mean time, in order to allow you to continue development, please follow the steps: Download the new DLLs zip package (MVVMLight_V4_1_25_WP8). Right click on the Zip file and select Properties from the context menu. Press the “Unblock” button (if available) and then OK. Right click again on the zip package and select “Extract all…”. Select a known location for the new DLLs. Open the MVVM Light project with the design time error in Visual Studio 2012. Open the References folder in the Solution Explorer. Select the following DLLs: GalaSoft.MvvmLight.dll, GalaSoft.MvvmLight.Extras.dll, Microsoft.Practices.ServiceLocation.dll and System.Windows.Interactivity.dll. Press “delete” and confirm to remove the DLLs from your project. Right click on References and select Add Reference from the context menu. Browse to the folder with the new DLLs. Select the four new DLLs and press OK. Rebuild your application, and open it again in Blend or in the Visual Studio designer. The error should be gone now. In the next few days, as time allows, I will publish a new MSI containing a fixed version of the DLLs as well as a few other improvements. This quick fix should however allow you to continue working on your Windows Phone 8 projects in design mode too.   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

  • Why do some web servers not respond to icmp requests?

    - by John Himmelman
    What is the purpose of blocking/dropping inbound ICMP traffic on a public web server? Is it common for it be blocked? I had to test if a server was accessible from various locations (tested on various servers located in different states/countries). I'd rely on ping as a quick & reliable method of determining if a server was online/network-accessible. After not receiving a response on a couple boxes, I tried using lynx to load the site, and it worked.

    Read the article

  • External Full HD monitor and Virtual Desktop Size

    - by Stefan
    I have two FullHD monitors attached to my ATI graphics card [2]. The resolution of both of them is detected properly without any modifications to /etc/X11/xorg.conf. I can run both of them in clone mode. However, when I try to run them next to each other, I got the following error: The selected configuration for displays could not be applied. If tried to fix this according to [1]. My xorg.conf now looks like this: Section "Module" Load "glx" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" # The 1088 is the smallest multiple of 32 >= 1088 # see manpages Virtual 1920 1088 EndSubSection EndSection This does not seem to be parsed properly. After restarting X, I cannot set resolutions beyond 1600 or so any more. /var/log/Xorg.0.log gives: [ 15.676] (II) fglrx(0): Not using mode "1920x1080" (width too large for virtual size) [ 15.676] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size) Are my modifications syntactically incorrect? According to the man page, it should be fine. Any ideas? OS: Ubuntu 11.10 64bit [1] http://askubuntu.com/a/75546/5023 [2] 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series]

    Read the article

  • AndEngine GLES2 - getting Black screen on emulator 4.1

    - by dizworld.com
    I'm new in andengine . I create following code public class MainActivity extends BaseGameActivity { static final int CAMERA_WIDTH = 800; static final int CAMERA_HEIGHT = 480; public Font mFont; public Camera mCamera; //A reference to the current scene public Scene mCurrentScene; public static BaseActivity instance; public EngineOptions onCreateEngineOptions() { instance = this; mCamera = new Camera(0, 0, CAMERA_WIDTH, CAMERA_HEIGHT); return new EngineOptions(true, ScreenOrientation.LANDSCAPE_SENSOR, new RatioResolutionPolicy(CAMERA_WIDTH, CAMERA_HEIGHT), mCamera); } @Override public void onCreateResources(OnCreateResourcesCallback arg0) throws Exception { mFont = FontFactory.create(this.getFontManager(),this.getTextureManager(), 256, 256,Typeface.create(Typeface.DEFAULT, Typeface.BOLD), 32); mFont.load(); } @Override public void onCreateScene(OnCreateSceneCallback arg0) throws Exception { mEngine.registerUpdateHandler(new FPSLogger()); mCurrentScene = new Scene(); Log.v("Scene","enter"); mCurrentScene.setBackground(new Background(0.09804f, 0.7274f, 0.8f)); // return mCurrentScene; } @Override public void onPopulateScene(Scene arg0, OnPopulateSceneCallback arg1) throws Exception { // TODO Auto-generated method stub } } I got code on sites there is returning scene but in AndEngine GLES2 in method onCreateScene() there is no return scene ... so my First run is BLACK .. any suggestion :)

    Read the article

< Previous Page | 569 570 571 572 573 574 575 576 577 578 579 580  | Next Page >