memory limit - Page 573

Slow Routing Over LAN (Wired)

- by reverendj1

I'm having issues with my router acting very slow (Adtran Netvanta 3458). We have two networks, let's call them A and B. When I run netperf from two servers on network A (no routing) I get speeds along the lines of 900 Mbps. Which makes sense, since we have all 1Gbps switches. When testing A to B (or vice-versa) I get speeds along the lines of 22Mbps. I have also tested connecting my laptop to the switchports on the router, and testing two servers on network A (no routing) and got speeds around 90 Mbps. Which makes sense since the switchports on the router are 100Mbps. Does anyone have any idea why routing would be so slow? We bought the router over a year ago, and we think it has been doing this since then, but we never actually tested it before. (network B isn't really used much, so we didn't notice much) We were implementing a site-to-site VPN and noticed it was ridiculously slow, so we started testing basic routing performance. I have ruled out cabling and router CPU/memory utilization. Adtran looked at my config, but didn't see anything wrong with it.

Read the article

What could possibly cause my computer to power down at random times?

- by geoffreydv

I have recently bought a new Power Supply and a new graphics card. My PC ran smoothly for a few months now but since a couple of days I'm having a strange problem. I am trying to isolate the problem to a specific piece of hardware (because if it's either the Power Supply or the Graphics card they are still under warranty). The problem started when I was playing a game (diablo 3). My PC suddenly powered down. I was unable to turn it on again by pressing the power button. I unplugged the power cable for a few seconds and plugged it back in. This time the pc powered on but the indication light turned orange instead of white as it normally does. The fans were not spinning and I did not see anything on my screen. After trying a couple of times I gave up. Two days later I tried again and this time the PC did boot up as usual. Everything looked okay until I tested if the problem was resolved by starting Diablo again. After about two minutes it powered down again as it did the first time. If I don't run any games my PC does power down after about 3-5 hours. Another fact that might be relevant: One time the PC did not shut down immediatly, instead first my graphics "powered down" but the music I was playing kept on playing. After about 20 seconds the pc powered down completely as usual. What I also noticed is that when I boot instantly after a power down, the chance of another power down occuring is much higher. Does anyone have an idea what could be causing this kind of behaviour or has a certain tool to diagnose the specific hardware parts? Thanks Specs: Memory: 6GB Processor: Intel i5 OS: Windows 7 64 bit The PC is a Dell Studio XPS 8100 with a replaced PSU and Graphics card: PSU: Corsair CX500 (500 watt) Graphics card: AMD Radeon 6850

Read the article

Debian 7 and PHP 5.4.4 error reporting

- by milovan

I use default php.ini and then in my PHP script (local.settings.php in Drupal) I simply set ini_set('error_reporting', 'E_ALL & ~E_NOTICE & ~E_STRICT'); According to documentation this means "show all messages minus notice and strict warnings". But in my case it still shows strict warnings! I have no idea why, because I clearly stated "~E_STRICT". If I comment it out then I see strict warnings. So it means that default from php.ini "E_ALL & ~E_DEPRECATED & ~E_STRICT" didn't do its job as it also has "~E_STRICT" but I still see strict warnings. On Debian 6 there was Suhoshin patch which was controlling usage of php_ini in PHP scripts. Especially when you try to get more memory than defined cap. Now on debian 7 there is no Suhoshin nor any other security element that might control php_ini. So what might cause php_ini not to be executed? Is there some new variable / setup / other that needs to be checked?

Read the article

Fedora 13 becomes unresponsive when too many applications running.

- by user61766

I am using Fedora 13 64bit on Dell Vostro full 4GB RAM system with default Gnome GUI. This is very annoying problem that I don't how to fix except by rebooting the whole PC. When I have too many applications running ( like browser windows), the system start acting sluggish. The fist symptoms appear in Eclipse IDE which becomes so terrible it just becomes frozen for sometime one whole minute after I try to edit something in the editor. Then Firefox seems like it has crashed. Google Chrome becomes very unresponsive as well. All GUI applications including File manager becomes unresponsive. When I check System Monitor, the CPU is still around 20% and memory is at 80% but the system seems getting fried up. This progressively becomes worse until I soft reboot it or if I dont do it evetually the whole system is fried, no response to any keyboard key or mouse and I have to hit the hardware turn off button. I regularly yum update the system but this makes no difference. Please don't tell not to run too many applications because I need those for my work. I thought Linux is well designed Operating System but I am very disappointed so far. Can some one here help ?

Read the article

Windows Server 2008 (x64): Wont boot past bios page

- by WebSolProv

Happy New Year, Since a month or so ago I inherited responsibility for small network administration for my sins. The domain controller (yes there is only one, and yes I know it is best practice to have two even in a small domain setup) went down overnight and I have been trying all day to get it back up and running. Unfortunately this machine also administers our entire ActiveDirectory setup: 1) It goes thru the BIOS without any errors, nothing whatsoever 2) It gets into the “select safe mode, safe mode with networking, normal” etc and if you select either of the safe mode options it loads a few files then reboots. If you select normal it just runs for a bit (doesn’t get to the windows splash screen) and then reboots again. 3) If you select windows repair, it asks for an image to repair too: however it would appear that none was taken that can be used (!!) or one is not being shown. 4) I have tried repairing the boot sector and the boot configuration using Bootrec.exe, both which it says were completed successfully but still it doesn’t work. 5) I have tried swapping the drives into another server to rule out hardware and that didn’t work either so clearly it’s the OS. 6) I have tried running chkdsk which ran fine, and also memory check which was also fine. We do have another machine on the network that was installed as a DC so when we decommission the current infrastructure but when I try and "promote" this to the lead DC then I get “you cannot modify domain or trust information because a PDC emulator cannot be contacted" so I am unable to replicare the ActiveDirectory details. If anyone can think of any direction I should follow it would be greatly appreciated, Thanks, Alex

Read the article

How many VPS do I need for my website? [duplicate]

- by michael

This question already has an answer here: How do you do load testing and capacity planning for web sites? 3 answers I made a website which aims at simulating a trading market. There are a list of prices and corresponding volumes that people want to purchase. Users can purchase at any price any time. My website retrieves the prices and volumes from my database every 2 seconds (I have to update the user's browser frequently to allow them to see the current market). Users' database INSERT query can be sent any time if they purchase. I used ajax to post or get data from my database (sometimes nested ajax calls). So, every 2 seconds, each user will send or retrieve data by using more than 20 database queries (in order to show a users the current prices and volumes). Also, I may have 200 users at a time. I was not using VPS before, and I got banned because of using too much CPU resources on my host. Now, I've purchased VPS*2 from a hosting servers. I have: CPU Speed: 2000 Mhz Memory: 2048 MB Disk Space: 20000 MB Bandwidth: 2000 GB Connection: 40 Mb/s Dedicated IP's 2 IP's Is this enough for my 200 users? Also, which VPS OS is suitable for me? Thank you.

Read the article

Android WebView not loading a JavaScript file, but Android Browser loads it fine.

- by Justin

I'm writing an application which connects to a back office site. The backoffice site contains a whole slew of JavaScript functions, at least 100 times the average site. Unfortunately it does not load them, and causes much of the functionality to not work properly. So I am running a test. I put a page out on my server which loads the FireBugLite javascript text. Its a lot of javascript and perfect to test and see if the Android WebView will load it. The WebView loads nothing, but the browser loads the Firebug Icon. What on earth would make the difference, why can it run in the browser and not in my WebView? Any suggestions. More background information, in order to get the stinking backoffice application available on a Droid (or any other platform except windows) I needed to trick the bakcoffice application to believe what's accessing the website is Internet Explorer. I do this by modifying the WebView User Agent. Also for this application I've slimmed my landing page, so I could give you the source to offer me aid. package ksc.myKMB; import android.app.Activity; import android.app.AlertDialog; import android.app.Dialog; import android.app.ProgressDialog; import android.content.DialogInterface; import android.graphics.Bitmap; import android.os.Bundle; import android.view.Menu; import android.view.MenuInflater; import android.view.MenuItem; import android.view.Window; import android.webkit.WebChromeClient; import android.webkit.WebView; import android.webkit.WebSettings; import android.webkit.WebViewClient; import android.widget.Toast; public class myKMB extends Activity { /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); /** Performs base set up */ /** Create a Activity of this Activity, IE myProcess */ myProcess = this; /*** Create global objects and web browsing objects */ HideDialogOnce = true; webview = new WebView(this) { }; webChromeClient = new WebChromeClient() { public void onProgressChanged(WebView view, int progress) { // Activities and WebViews measure progress with different scales. // The progress meter will automatically disappear when we reach 100% myProcess.setProgress((progress * 100)); //CreateMessage("Progress is : " + progress); } }; webViewClient = new WebViewClient() { public void onReceivedError(WebView view, int errorCode, String description, String failingUrl) { Toast.makeText(myProcess, MessageBegText + description + MessageEndText, Toast.LENGTH_SHORT).show(); } public void onPageFinished (WebView view, String url) { /** Hide dialog */ try { // loadingDialog.dismiss(); } finally { } //myProcess.setProgress(1000); /** Fon't show the dialog while I'm performing fixes */ //HideDialogOnce = true; view.loadUrl("javascript:document.getElementById('JTRANS011').style.visibility='visible';"); } public void onPageStarted(WebView view, String url, Bitmap favicon) { if (HideDialogOnce == false) { //loadingDialog = ProgressDialog.show(myProcess, "", // "One moment, the page is laoding...", true); } else { //HideDialogOnce = true; } } }; getWindow().requestFeature(Window.FEATURE_PROGRESS); webview.setWebChromeClient(webChromeClient); webview.setWebViewClient(webViewClient); setContentView(webview); /** Load the Keynote Browser Settings */ LoadSettings(); webview.loadUrl(LandingPage); } /** Get Menu */ @Override public boolean onCreateOptionsMenu(Menu menu) { MenuInflater inflater = getMenuInflater(); inflater.inflate(R.menu.menu, menu); return true; } /** an item gets pushed */ @Override public boolean onOptionsItemSelected(MenuItem item) { switch (item.getItemId()) { // We have only one menu option case R.id.quit: System.exit(0); break; case R.id.back: webview.goBack(); case R.id.refresh: webview.reload(); case R.id.info: //IncludeJavascript(""); } return true; } /** Begin Globals */ public WebView webview; public WebChromeClient webChromeClient; public WebViewClient webViewClient; public ProgressDialog loadingDialog; public Boolean HideDialogOnce; public Activity myProcess; public String OverideUserAgent_IE = "Mozilla/5.0 (Windows; MSIE 6.0; Android 1.6; en-US) AppleWebKit/525.10+ (KHTML, like Gecko) Version/3.0.4 Safari/523.12.2 myKMB/1.0"; public String LandingPage = "http://kscserver.com/main-leap-slim.html"; public String MessageBegText = "Problem making a connection, Details: "; public String MessageEndText = " For Support Call: (xxx) xxx - xxxx."; public void LoadSettings() { webview.getSettings().setUserAgentString(OverideUserAgent_IE); webview.getSettings().setJavaScriptEnabled(true); webview.getSettings().setBuiltInZoomControls(true); webview.getSettings().setSupportZoom(true); } /** Creates a message alert dialog */ public void CreateMessage(String message) { AlertDialog.Builder builder = new AlertDialog.Builder(this); builder.setMessage(message) .setCancelable(true) .setNegativeButton("Close", new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int id) { dialog.cancel(); } }); AlertDialog alert = builder.create(); alert.show(); } } My Application is running in the background, and as you can see no Firebug in the lower right hand corner. However the browser (the emulator on top) has the same page but shows the firebug. What am I doing wrong? I'm assuming its either not enough memory allocated to the application, process power allocation, or a physical memory thing. I can't tell, all I know is the results are strange. I get the same thing form my android device, the application shows no firebug but the browser shows the firebug.

Read the article

.NET file Decryption - Bad Data

- by Jon

I am in the process of rewriting an old application. The old app stored data in a scoreboard file that was encrypted with the following code: private const String SSecretKey = @"?B?n?Mj?"; public DataTable GetScoreboardFromFile() { FileInfo f = new FileInfo(scoreBoardLocation); if (!f.Exists) { return setupNewScoreBoard(); } DESCryptoServiceProvider DES = new DESCryptoServiceProvider(); //A 64 bit key and IV is required for this provider. //Set secret key For DES algorithm. DES.Key = ASCIIEncoding.ASCII.GetBytes(SSecretKey); //Set initialization vector. DES.IV = ASCIIEncoding.ASCII.GetBytes(SSecretKey); //Create a file stream to read the encrypted file back. FileStream fsread = new FileStream(scoreBoardLocation, FileMode.Open, FileAccess.Read); //Create a DES decryptor from the DES instance. ICryptoTransform desdecrypt = DES.CreateDecryptor(); //Create crypto stream set to read and do a //DES decryption transform on incoming bytes. CryptoStream cryptostreamDecr = new CryptoStream(fsread, desdecrypt, CryptoStreamMode.Read); DataTable dTable = new DataTable("scoreboard"); dTable.ReadXml(new StreamReader(cryptostreamDecr)); cryptostreamDecr.Close(); fsread.Close(); return dTable; } This works fine. I have copied the code into my new app so that I can create a legacy loader and convert the data into the new format. The problem is I get a "Bad Data" error: System.Security.Cryptography.CryptographicException was unhandled Message="Bad Data.\r\n" Source="mscorlib" The error fires at this line: dTable.ReadXml(new StreamReader(cryptostreamDecr)); The encrypted file was created today on the same machine with the old code. I guess that maybe the encryption / decryption process uses the application name / file or something and therefore means I can not open it. Does anyone have an idea as to: A) Be able explain why this isn't working? B) Offer a solution that would allow me to be able to open files that were created with the legacy application and be able to convert them please? Here is the whole class that deals with loading and saving the scoreboard: using System; using System.Collections.Generic; using System.Text; using System.Security.Cryptography; using System.Runtime.InteropServices; using System.IO; using System.Data; using System.Xml; using System.Threading; namespace JawBreaker { [Serializable] class ScoreBoardLoader { private Jawbreaker jawbreaker; private String sSecretKey = @"?B?n?Mj?"; private String scoreBoardFileLocation = ""; private bool keepScoreBoardUpdated = true; private int intTimer = 180000; public ScoreBoardLoader(Jawbreaker jawbreaker, String scoreBoardFileLocation) { this.jawbreaker = jawbreaker; this.scoreBoardFileLocation = scoreBoardFileLocation; } // Call this function to remove the key from memory after use for security [System.Runtime.InteropServices.DllImport("KERNEL32.DLL", EntryPoint = "RtlZeroMemory")] public static extern bool ZeroMemory(IntPtr Destination, int Length); // Function to Generate a 64 bits Key. private string GenerateKey() { // Create an instance of Symetric Algorithm. Key and IV is generated automatically. DESCryptoServiceProvider desCrypto = (DESCryptoServiceProvider)DESCryptoServiceProvider.Create(); // Use the Automatically generated key for Encryption. return ASCIIEncoding.ASCII.GetString(desCrypto.Key); } public void writeScoreboardToFile() { DataTable tempScoreBoard = getScoreboardFromFile(); //add in the new scores to the end of the file. for (int i = 0; i < jawbreaker.Scoreboard.Rows.Count; i++) { DataRow row = tempScoreBoard.NewRow(); row.ItemArray = jawbreaker.Scoreboard.Rows[i].ItemArray; tempScoreBoard.Rows.Add(row); } //before it is written back to the file make sure we update the sync info if (jawbreaker.SyncScoreboard) { //connect to webservice, login and update all the scores that have not been synced. for (int i = 0; i < tempScoreBoard.Rows.Count; i++) { try { //check to see if that row has been synced to the server if (!Boolean.Parse(tempScoreBoard.Rows[i].ItemArray[7].ToString())) { //sync info to server //update the row to say that it has been updated object[] tempArray = tempScoreBoard.Rows[i].ItemArray; tempArray[7] = true; tempScoreBoard.Rows[i].ItemArray = tempArray; tempScoreBoard.AcceptChanges(); } } catch (Exception ex) { jawbreaker.writeErrorToLog("ERROR OCCURED DURING SYNC TO SERVER UPDATE: " + ex.Message); } } } FileStream fsEncrypted = new FileStream(scoreBoardFileLocation, FileMode.Create, FileAccess.Write); DESCryptoServiceProvider DES = new DESCryptoServiceProvider(); DES.Key = ASCIIEncoding.ASCII.GetBytes(sSecretKey); DES.IV = ASCIIEncoding.ASCII.GetBytes(sSecretKey); ICryptoTransform desencrypt = DES.CreateEncryptor(); CryptoStream cryptostream = new CryptoStream(fsEncrypted, desencrypt, CryptoStreamMode.Write); MemoryStream ms = new MemoryStream(); tempScoreBoard.WriteXml(ms, XmlWriteMode.WriteSchema); ms.Position = 0; byte[] bitarray = new byte[ms.Length]; ms.Read(bitarray, 0, bitarray.Length); cryptostream.Write(bitarray, 0, bitarray.Length); cryptostream.Close(); ms.Close(); //now the scores have been added to the file remove them from the datatable jawbreaker.Scoreboard.Rows.Clear(); } public void startPeriodicScoreboardWriteToFile() { while (keepScoreBoardUpdated) { //three minute sleep. Thread.Sleep(intTimer); writeScoreboardToFile(); } } public void stopPeriodicScoreboardWriteToFile() { keepScoreBoardUpdated = false; } public int IntTimer { get { return intTimer; } set { intTimer = value; } } public DataTable getScoreboardFromFile() { FileInfo f = new FileInfo(scoreBoardFileLocation); if (!f.Exists) { jawbreaker.writeInfoToLog("Scoreboard not there so creating new one"); return setupNewScoreBoard(); } else { DESCryptoServiceProvider DES = new DESCryptoServiceProvider(); //A 64 bit key and IV is required for this provider. //Set secret key For DES algorithm. DES.Key = ASCIIEncoding.ASCII.GetBytes(sSecretKey); //Set initialization vector. DES.IV = ASCIIEncoding.ASCII.GetBytes(sSecretKey); //Create a file stream to read the encrypted file back. FileStream fsread = new FileStream(scoreBoardFileLocation, FileMode.Open, FileAccess.Read); //Create a DES decryptor from the DES instance. ICryptoTransform desdecrypt = DES.CreateDecryptor(); //Create crypto stream set to read and do a //DES decryption transform on incoming bytes. CryptoStream cryptostreamDecr = new CryptoStream(fsread, desdecrypt, CryptoStreamMode.Read); DataTable dTable = new DataTable("scoreboard"); dTable.ReadXml(new StreamReader(cryptostreamDecr)); cryptostreamDecr.Close(); fsread.Close(); return dTable; } } public DataTable setupNewScoreBoard() { //scoreboard info into dataset DataTable scoreboard = new DataTable("scoreboard"); scoreboard.Columns.Add(new DataColumn("playername", System.Type.GetType("System.String"))); scoreboard.Columns.Add(new DataColumn("score", System.Type.GetType("System.Int32"))); scoreboard.Columns.Add(new DataColumn("ballnumber", System.Type.GetType("System.Int32"))); scoreboard.Columns.Add(new DataColumn("xsize", System.Type.GetType("System.Int32"))); scoreboard.Columns.Add(new DataColumn("ysize", System.Type.GetType("System.Int32"))); scoreboard.Columns.Add(new DataColumn("gametype", System.Type.GetType("System.String"))); scoreboard.Columns.Add(new DataColumn("date", System.Type.GetType("System.DateTime"))); scoreboard.Columns.Add(new DataColumn("synced", System.Type.GetType("System.Boolean"))); scoreboard.AcceptChanges(); return scoreboard; } private void Run() { // For additional security Pin the key. GCHandle gch = GCHandle.Alloc(sSecretKey, GCHandleType.Pinned); // Remove the Key from memory. ZeroMemory(gch.AddrOfPinnedObject(), sSecretKey.Length * 2); gch.Free(); } } }

Read the article

Nested property binding

- by EtherealMonkey

Recently, I have been trying to wrap my mind around the BindingList<T> and INotifyPropertChanged. More specifically - How do I make a collection of objects (having objects as properties) which will allow me to subscribe to events throughout the tree? To that end, I have examined the code offered as examples by others. One such project that I downloaded was Nested Property Binding - CodeProject by "seesharper". Now, the article explains the implementation, but there was a question by "Someone@AnotherWorld" about "INotifyPropertyChanged in nested objects". His question was: Hi, nice stuff! But after a couple of time using your solution I realize the ObjectBindingSource ignores the PropertyChanged event of nested objects. E.g. I've got a class 'Foo' with two properties named 'Name' and 'Bar'. 'Name' is a string an 'Bar' reference an instance of class 'Bar', which has a 'Name' property of type string too and both classes implements INotifyPropertyChanged. With your binding source reading and writing with both properties ('Name' and 'Bar_Name') works fine but the PropertyChanged event works only for the 'Name' property, because the binding source listen only for events of 'Foo'. One workaround is to retrigger the PropertyChanged event in the appropriate class (here 'Foo'). What's very unclean! The other approach would be to extend ObjectBindingSource so that all owner of nested property which implements INotifyPropertyChanged get used for receive changes, but how? Thanks! I had asked about BindingList<T> yesterday and received a good answer from Aaronaught. In my question, I had a similar point as "Someone@AnotherWorld": if Keywords were to implement INotifyPropertyChanged, would changes be accessible to the BindingList through the ScannedImage object? To which Aaronaught's response was: No, they will not. BindingList only looks at the specific object in the list, it has no ability to scan all dependencies and monitor everything in the graph (nor would that always be a good idea, if it were possible). I understand Aaronaught's comment regarding this behavior not necessarily being a good idea. Additionally, his suggestion to have my bound object "relay" events on behalf of it's member objects works fine and is perfectly acceptable. For me, "re-triggering" the PropertyChanged event does not seem so unclean as "Someone@AnotherWorld" laments. I do understand why he protests - in the interest of loosely coupled objects. However, I believe that coupling between objects that are part of a composition is logical and not so undesirable as this may be in other scenarios. (I am a newb, so I could be waaayyy off base.) Anyway, in the interest of exploring an answer to the question by "Someone@AnotherWorld", I altered the MainForm.cs file of the example project from Nested Property Binding - CodeProject by "seesharper" to the following: using System; using System.Collections.Generic; using System.ComponentModel; using System.Core.ComponentModel; using System.Windows.Forms; namespace ObjectBindingSourceDemo { public partial class MainForm : Form { private readonly List<Customer> _customers = new List<Customer>(); private readonly List<Product> _products = new List<Product>(); private List<Order> orders; public MainForm() { InitializeComponent(); dataGridView1.AutoGenerateColumns = false; dataGridView2.AutoGenerateColumns = false; CreateData(); } private void CreateData() { _customers.Add( new Customer(1, "Jane Wilson", new Address("98104", "6657 Sand Pointe Lane", "Seattle", "USA"))); _customers.Add( new Customer(1, "Bill Smith", new Address("94109", "5725 Glaze Drive", "San Francisco", "USA"))); _customers.Add( new Customer(1, "Samantha Brown", null)); _products.Add(new Product(1, "Keyboard", 49.99)); _products.Add(new Product(2, "Mouse", 10.99)); _products.Add(new Product(3, "PC", 599.99)); _products.Add(new Product(4, "Monitor", 299.99)); _products.Add(new Product(5, "LapTop", 799.99)); _products.Add(new Product(6, "Harddisc", 89.99)); customerBindingSource.DataSource = _customers; productBindingSource.DataSource = _products; orders = new List<Order>(); orders.Add(new Order(1, DateTime.Now, _customers[0])); orders.Add(new Order(2, DateTime.Now, _customers[1])); orders.Add(new Order(3, DateTime.Now, _customers[2])); #region Added by me OrderLine orderLine1 = new OrderLine(_products[0], 1); OrderLine orderLine2 = new OrderLine(_products[1], 3); orderLine1.PropertyChanged += new PropertyChangedEventHandler(OrderLineChanged); orderLine2.PropertyChanged += new PropertyChangedEventHandler(OrderLineChanged); orders[0].OrderLines.Add(orderLine1); orders[0].OrderLines.Add(orderLine2); #endregion // Removed by me in lieu of region above. //orders[0].OrderLines.Add(new OrderLine(_products[0], 1)); //orders[0].OrderLines.Add(new OrderLine(_products[1], 3)); ordersBindingSource.DataSource = orders; } #region Added by me // Have to wait until the form is Shown to wire up the events // for orderDetailsBindingSource. Otherwise, they are triggered // during MainForm().InitializeComponent(). private void MainForm_Shown(object sender, EventArgs e) { orderDetailsBindingSource.AddingNew += new AddingNewEventHandler(orderDetailsBindSrc_AddingNew); orderDetailsBindingSource.CurrentItemChanged += new EventHandler(orderDetailsBindSrc_CurrentItemChanged); orderDetailsBindingSource.ListChanged += new ListChangedEventHandler(orderDetailsBindSrc_ListChanged); } private void orderDetailsBindSrc_AddingNew( object sender, AddingNewEventArgs e) { } private void orderDetailsBindSrc_CurrentItemChanged( object sender, EventArgs e) { } private void orderDetailsBindSrc_ListChanged( object sender, ListChangedEventArgs e) { ObjectBindingSource bindingSource = (ObjectBindingSource)sender; if (!(bindingSource.Current == null)) { // Unsure if GetType().ToString() is required b/c ToString() // *seems* // to return the same value. if (bindingSource.Current.GetType().ToString() == "ObjectBindingSourceDemo.OrderLine") { if (e.ListChangedType == ListChangedType.ItemAdded) { // I wish that I knew of a way to determine // if the 'PropertyChanged' delegate assignment is null. // I don't like the current test, but it seems to work. if (orders[ ordersBindingSource.Position].OrderLines[ e.NewIndex].Product == null) { orders[ ordersBindingSource.Position].OrderLines[ e.NewIndex].PropertyChanged += new PropertyChangedEventHandler( OrderLineChanged); } } if (e.ListChangedType == ListChangedType.ItemDeleted) { // Will throw exception when leaving // an OrderLine row with unitialized properties. // // I presume this is because the item // has already been 'disposed' of at this point. // *but* // Will it be actually be released from memory // if the delegate assignment for PropertyChanged // was never removed??? if (orders[ ordersBindingSource.Position].OrderLines[ e.NewIndex].Product != null) { orders[ ordersBindingSource.Position].OrderLines[ e.NewIndex].PropertyChanged -= new PropertyChangedEventHandler( OrderLineChanged); } } } } } private void OrderLineChanged(object sender, PropertyChangedEventArgs e) { MessageBox.Show(e.PropertyName, "Property Changed:"); } #endregion } } In the method private void orderDetailsBindSrc_ListChanged(object sender, ListChangedEventArgs e) I am able to hook up the PropertyChangedEventHandler to the OrderLine object as it is being created. However, I cannot seem to find a way to unhook the PropertyChangedEventHandler from the OrderLine object before it is being removed from the orders[i].OrderLines list. So, my questions are: Am I simply trying to do something that is very, very wrong here? Will the OrderLines object that I add the delegate assignments to ever be released from memory if the assignment is not removed? Is there a "sane" method of achieving this scenario? Also, note that this question is not specifically related to my prior. I have actually solved the issue which had prompted me to inquire before. However, I have reached a point with this particular topic of discovery where my curiosity has exceeded my patience - hopefully someone here can shed some light on this?

Read the article

HTML client-side portable file generation - no external resources or server calls

- by awashburn

I have the following situation: I have set up a series of Cron jobs on an internal company server to run various PHP scripts designed to check data integrity. Each PHP script queries a company database, formats the returned query data into an HTML file containing one or more <tables>, and then mails the HTML file to several client emails as an attachment. From my experience, most of the PHP scripts generate HTML files with only a few tables, however there are a few PHP scripts the create HTML files with around 30 tables. HTML files have been chosen as the distribution format of these scans because HTML makes it easy to view many tables at once in a browser window. I would like to add the functionality for the clients to download a table in the HTML file as a CSV file. I anticipate clients using this feature when they suspect a data integrity issue based on the table data. It would be ideal for them to be able to take the table in question, export the data out to a CSV file, and then study it further. Because need for exporting the data to CSV format is at the discretion of the client, unpredictable as to what table will be under scrutiny, and intermittently used I do not want to create CSV files for every table. Normally creating a CSV file wouldn't be too difficult, using JavaScript/jQuery to preform DOM traversal and generate the CSV file data into a string utilizing a server call or flash library to facilitate the download process; but I have one limiting constraint: The HTML file needs to be "portable." I would like the clients to be able to take their HTML file and preform analysis of the data outside the company intranet. Also it is likely these HTML files will be archived, so making the export functionality "self contained" in the HTML files is a highly desirable feature for the two previous reasons. The "portable" constraint of CSV file generation from a HTML file means: I cannot make a server call. This means ALL the file generation must be done client-side. I want the single HTML file attached to the email to contain all the resources to generate the CSV file. This means I cannot use jQuery or flash libraries to generate the file. I understand, for obvious security reasons, that writing out files to disk using JavaScript isn't supported by any browser. I don't want to create a file without the user knowledge; I would like to generate the file using JavaScript in memory and then prompt the user the "download" the file from memory. I have looked into generating the CSV file as a URI however, according to my research and testing, this approach has a few problems: URIs for files are not supported by IE (See Here) URIs in FireFox saves the file with a random file name and as a .part file As much as it pains me, I can accept the fact the IE<=v9 won't create a URI for files. I would like to create a semi-cross-browser solution in which Chrome, Firefox, and Safari create a URI to download the CSV file after JavaScript DOM traversal compiles the data. My Example Table: <table> <thead class="resulttitle"> <tr> <th style="text-align:center;" colspan="3"> NameOfTheTable</th> </tr> </thead> <tbody> <tr class="resultheader"> <td>VEN_PK</td> <td>VEN_CompanyName</td> <td>VEN_Order</td> </tr> <tr> <td class='resultfield'>1</td> <td class='resultfield'>Brander Ranch</td> <td class='resultfield'>Beef</td> </tr> <tr> <td class='resultfield'>2</td> <td class='resultfield'>Super Tree Produce</td> <td class='resultfield'>Apples</td> </tr> <tr> <td class='resultfield'>3</td> <td class='resultfield'>John's Distilery</td> <td class='resultfield'>Beer</td> </tr> </tbody> <tfoot> <tr> <td colspan="3" style="text-align:right;"> <button onclick="doSomething(this);">Export to CSV File</button></td> </tr> </tfoot> </table> My Example JavaScript: <script type="text/javascript"> function doSomething(inButton) { /* locate elements */ var table = inButton.parentNode.parentNode.parentNode.parentNode; var name = table.rows[0].cells[0].textContent; var tbody = table.tBodies[0]; /* create CSV String through DOM traversal */ var rows = tbody.rows; var csvStr = ""; for (var i=0; i < rows.length; i++) { for (var j=0; j < rows[i].cells.length; j++) { csvStr += rows[i].cells[j].textContent +","; } csvStr += "\n"; } /* temporary proof DOM traversal was successful */ alert("Table Name:\t" + name + "\nCSV String:\n" + csvStr); /* Create URI Here! * (code I am missing) */ /* Approach 1 : Auto-download * downloads CSV data but: * In FireFox downloads as randomCharacers.part instead of name.csv * In Chrome downloads without prompting the user * In Safari opens the files in browser (textfile) */ //var hrefData = "data:text/csv;charset=US-ASCII," + encodeURIComponent(csvStr); //document.location.href = hrefData; /* Approach 2 : Right-Click Save As... */ var hrefData = "data:text/csv;charset=US-ASCII," + encodeURIComponent(csvStr); var fileLink = document.createElement("a"); fileLink.href = hrefData; fileLink.innerHTML = "download"; parentTD = inButton.parentNode; parentTD.appendChild(fileLink); parentTD.removeChild(inButton); } </script> I am looking for an example solution in which the above example table can be downloaded as a CSV file: using a URI the user is prompted to save the file the default filename is the name of the table. code works as described in modern versions of FireFox, Safari, & Chrome I have added a <script> tag with the DOM traversal function doSomething(). The real help I need is with formatting the URI to what I want within the doSomething() function.

Read the article

My App crashes when launched on my Iphone

- by Miky Mike

hi guys, I have a problem here : my app crashed on my Iphone (JB) though Xcode doesn't complain about anything. The app works fine on the simulator though. However, there is this in the device logs : Thread 0 Crashed: 0 libSystem.B.dylib 0x00078ac8 kill + 8 1 libSystem.B.dylib 0x00078ab8 kill + 4 2 libSystem.B.dylib 0x00078aaa raise + 10 3 libSystem.B.dylib 0x0008d03a abort + 50 4 libstdc++.6.dylib 0x00044a20 __gnu_cxx::__verbose_terminate_handler() + 376 5 libobjc.A.dylib 0x00005958 _objc_terminate + 104 6 libstdc++.6.dylib 0x00042df2 _cxxabiv1::_terminate(void (*)()) + 46 7 libstdc++.6.dylib 0x00042e46 std::terminate() + 10 8 libstdc++.6.dylib 0x00042f16 __cxa_throw + 78 9 libobjc.A.dylib 0x00004838 objc_exception_throw + 64 10 CoreFoundation 0x0009fd0e +[NSException raise:format:arguments:] + 62 11 CoreFoundation 0x0009fd48 +[NSException raise:format:] + 28 12 Foundation 0x000125d8 -[NSURL(NSURL) initFileURLWithPath:] + 64 13 Foundation 0x000371e0 +[NSURL(NSURL) fileURLWithPath:] + 24 14 TheLearningMachine 0x00002d08 0x1000 + 7432 15 TheLearningMachine 0x00002e8c 0x1000 + 7820 16 TheLearningMachine 0x00002be4 0x1000 + 7140 17 TheLearningMachine 0x000029b6 0x1000 + 6582 18 UIKit 0x0000e47a -[UIApplication _callInitializationDelegatesForURL:payload:suspended:] + 766 19 UIKit 0x000049e0 -[UIApplication _runWithURL:payload:launchOrientation:statusBarStyle:statusBarHidden:] + 200 20 UIKit 0x0005dfd6 -[UIApplication handleEvent:withNewEvent:] + 1390 21 UIKit 0x0005d8fa -[UIApplication sendEvent:] + 38 22 UIKit 0x0005d330 _UIApplicationHandleEvent + 5104 23 GraphicsServices 0x00005044 PurpleEventCallback + 660 24 CoreFoundation 0x00034cdc __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE1_PERFORM_FUNCTION + 20 25 CoreFoundation 0x00034ca0 __CFRunLoopDoSource1 + 160 26 CoreFoundation 0x00027566 __CFRunLoopRun + 514 27 CoreFoundation 0x00027270 CFRunLoopRunSpecific + 224 28 CoreFoundation 0x00027178 CFRunLoopRunInMode + 52 29 UIKit 0x000040fc -[UIApplication _run] + 364 30 UIKit 0x00002128 UIApplicationMain + 664 31 TheLearningMachine 0x00002948 0x1000 + 6472 32 TheLearningMachine 0x000028fc 0x1000 + 6396 Thread 1: 0 libSystem.B.dylib 0x0002d330 kevent + 24 1 libSystem.B.dylib 0x000d6b6c _dispatch_mgr_invoke + 88 2 libSystem.B.dylib 0x000d65bc _dispatch_queue_invoke + 96 3 libSystem.B.dylib 0x000d675c _dispatch_worker_thread2 + 120 4 libSystem.B.dylib 0x0007a67a _pthread_wqthread + 258 5 libSystem.B.dylib 0x00073190 start_wqthread + 0 Thread 2: 0 libSystem.B.dylib 0x0007b19c __workq_kernreturn + 8 1 libSystem.B.dylib 0x0007a790 _pthread_wqthread + 536 2 libSystem.B.dylib 0x00073190 start_wqthread + 0 Thread 3: 0 libSystem.B.dylib 0x00000c98 mach_msg_trap + 20 1 libSystem.B.dylib 0x00002d64 mach_msg + 44 2 CoreFoundation 0x00027c38 __CFRunLoopServiceMachPort + 88 3 CoreFoundation 0x000274c2 __CFRunLoopRun + 350 4 CoreFoundation 0x00027270 CFRunLoopRunSpecific + 224 5 CoreFoundation 0x00027178 CFRunLoopRunInMode + 52 6 WebCore 0x000024e2 RunWebThread(void*) + 362 7 libSystem.B.dylib 0x0007a27e _pthread_start + 242 8 libSystem.B.dylib 0x0006f2a8 thread_start + 0 Thread 0 crashed with ARM Thread State: r0: 0x00000000 r1: 0x00000000 r2: 0x00000001 r3: 0x3e0862b4 r4: 0x00000006 r5: 0x0015a2ec r6: 0x2fffe090 r7: 0x2fffe0a0 r8: 0x3e1a378c r9: 0x00000065 r10: 0x33028e5a r11: 0x3e1ab89c ip: 0x00000025 sp: 0x2fffe0a0 lr: 0x30277abf pc: 0x30277ac8 cpsr: 0x000f0010 Any idea what the problem can be ? I've already spent my whole day on that, but... I'm stuck. Thanks in advance... Miky Mike Ok, Here is more then from the console, I get this : This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys002 Loading program into debugger… Program loaded. target remote-mobile /tmp/.XcodeGDBRemote-17280-65 Switching to remote-macosx protocol mem 0x1000 0x3fffffff cache mem 0x40000000 0xffffffff none mem 0x00000000 0x0fff none run Running… Error launching remote program: failed to get the task for process 456. Error launching remote program: failed to get the task for process 456. The program being debugged is not being run. The program being debugged is not being run. [Session started at 2010-12-23 20:33:33 +0100.] GNU gdb 6.3.50-20050815 (Apple version gdb-1472) (Thu Aug 5 05:54:10 UTC 2010) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys004 Loading program into debugger… Program loaded. target remote-mobile /tmp/.XcodeGDBRemote-17280-72 Switching to remote-macosx protocol mem 0x1000 0x3fffffff cache mem 0x40000000 0xffffffff none mem 0x00000000 0x0fff none run Running… Error launching remote program: failed to get the task for process 508. Error launching remote program: failed to get the task for process 508. The program being debugged is not being run. The program being debugged is not being run. And here is the code page that calls the URL import "TheLearningMachineAppDelegate.h" import "RootViewController.h" @implementation TheLearningMachineAppDelegate @synthesize window; @synthesize navigationController; pragma mark - pragma mark Application lifecycle (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions { RootViewController *rootViewController = (RootViewController *)[navigationController topViewController]; rootViewController.managedObjectContext = self.managedObjectContext; [window addSubview:[navigationController view]]; [window makeKeyAndVisible]; return YES; } (void)applicationWillResignActive:(UIApplication )application { / Sent when the application is about to move from active to inactive state. This can occur for certain types of temporary interruptions (such as an incoming phone call or SMS message) or when the user quits the application and it begins the transition to the background state. Use this method to pause ongoing tasks, disable timers, and throttle down OpenGL ES frame rates. Games should use this method to pause the game. */ } (void)applicationDidEnterBackground:(UIApplication *)application { [self saveContext]; } (void)applicationWillEnterForeground:(UIApplication )application { / Called as part of the transition from the background to the inactive state: here you can undo many of the changes made on entering the background. */ } (void)applicationDidBecomeActive:(UIApplication )application { / Restart any tasks that were paused (or not yet started) while the application was inactive. If the application was previously in the background, optionally refresh the user interface. */ } // Method that saves the managed object context before the application terminates. (void)applicationWillTerminate:(UIApplication *)application { [self saveContext]; } (void)saveContext { NSError *error = nil; if (managedObjectContext != nil) { if ([managedObjectContext hasChanges] && ![managedObjectContext save:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); //Replace this implementation with code to handle the error appropriately. //abort() causes the application to generate a crash log and terminate. You should not use this function in a shipping application, although it may be useful during development. If it is not possible to recover from the error, display an alert panel that instructs the user to quit the application by pressing the Home button. } } } pragma mark - pragma mark Core Data stack // Returns the managed object context for the application. (NSManagedObjectContext *)managedObjectContext { if (managedObjectContext != nil) { return managedObjectContext; } NSPersistentStoreCoordinator *coordinator = [self persistentStoreCoordinator]; if (coordinator != nil) { managedObjectContext = [[NSManagedObjectContext alloc] init]; [managedObjectContext setPersistentStoreCoordinator:coordinator]; } return managedObjectContext; } // Returns the managed object model for the application. (NSManagedObjectModel *)managedObjectModel { if (managedObjectModel != nil) { return managedObjectModel; } NSString *modelPath = [[NSBundle mainBundle] pathForResource:@"TheLearningMachine" ofType:@"momd"]; NSURL *modelURL = [NSURL fileURLWithPath:modelPath]; managedObjectModel = [[NSManagedObjectModel alloc] initWithContentsOfURL:modelURL]; return managedObjectModel; } pragma mark - pragma mark Application's Documents directory // Returns the path to the application's Documents directory. - (NSString *)applicationDocumentsDirectory { return [NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES) lastObject]; } // Returns the persistent store coordinator for the application. - (NSPersistentStoreCoordinator *)persistentStoreCoordinator { if (persistentStoreCoordinator != nil) { return persistentStoreCoordinator; } NSURL *storeURL = [NSURL fileURLWithPath: [[self applicationDocumentsDirectory] stringByAppendingPathComponent: @"TheLearningMachine.sqlite"]]; NSError *error = nil; persistentStoreCoordinator = [[NSPersistentStoreCoordinator alloc] initWithManagedObjectModel:[self managedObjectModel]]; if (![persistentStoreCoordinator addPersistentStoreWithType:NSSQLiteStoreType configuration:nil URL:storeURL options:nil error:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); abort(); } return persistentStoreCoordinator; } pragma mark - pragma mark Memory management (void)applicationDidReceiveMemoryWarning:(UIApplication )application { / Free up as much memory as possible by purging cached data objects that can be recreated (or reloaded from disk) later. */ } (void)dealloc { [managedObjectContext release]; [managedObjectModel release]; [persistentStoreCoordinator release]; [window release]; [super dealloc]; } @end

Read the article

Implementation of Nib project to Storyboard, Xcode

- by Blake Loizides

I have made a tabbed bar application in storyboard in xcode. I,m new to xcode. I got a Sample TableView XIB project from apple that I edited to my needs,The project has a UITableView that I Customized with Images, And with help of a certain forum member I was able to link up each image to a New View Controller. I tried to port or integrate My Nib Project Code to my StoryBoard Tabbed Bar Application.I thought I had everything right had to comment out a few things to get no errors, But the project only goes to a Blank Table View. Below are 2 links, 1 to my StoryBoard Tabbed Bar Application with the Table Code that I tried to integrate and the other My Successful Nib Project. Also is some code and pictures. If anybody has some free time and does not mind to help I would be extremely grateful for any input given. link1 - Storyboard link2 - XIB DecorsViewController_iPhone.m // // TableViewsViewController.m // TableViews // // Created by Axit Patel on 9/2/10. // Copyright Bayside High School 2010. All rights reserved. // #import "DecorsViewController_iPhone.h" #import "SelectedCellViewController.h" @implementation DecorsViewController_iPhone #pragma mark - Synthesizers @synthesize sitesArray; @synthesize imagesArray; #pragma mark - View lifecycle // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { // Load up the sitesArray with a dummy array : sites NSArray *sites = [[NSArray alloc] initWithObjects:@"a", @"b", @"c", @"d", @"e", @"f", @"g", @"h", nil]; self.sitesArray = sites; //[sites release]; UIImage *PlumTree = [UIImage imageNamed:@"a.png"]; UIImage *CherryRoyale = [UIImage imageNamed:@"b.png"]; UIImage *MozambiqueWenge = [UIImage imageNamed:@"c.png"]; UIImage *RoyaleMahogany = [UIImage imageNamed:@"d.png"]; UIImage *Laricina = [UIImage imageNamed:@"e.png"]; UIImage *BurntOak = [UIImage imageNamed:@"f.png"]; UIImage *AutrianOak = [UIImage imageNamed:@"g.png"]; UIImage *SilverAcacia = [UIImage imageNamed:@"h.png"]; NSArray *images = [[NSArray alloc] initWithObjects: PlumTree, CherryRoyale, MozambiqueWenge, RoyaleMahogany, Laricina, BurntOak, AutrianOak, SilverAcacia, nil]; self.imagesArray = images; //[images release]; [super viewDidLoad]; } #pragma mark - Table View datasource methods // Required Methods // Return the number of rows in a section - (NSInteger)tableView:(UITableView *)table numberOfRowsInSection:(NSInteger)section { return [sitesArray count]; } // Returns cell to render for each row - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"CellIdentifier"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleSubtitle reuseIdentifier:CellIdentifier]; // Configure cell NSUInteger row = [indexPath row]; // Sets the text for the cell //cell.textLabel.text = [sitesArray objectAtIndex:row]; // Sets the imageview for the cell cell.imageView.image = [imagesArray objectAtIndex:row]; // Sets the accessory for the cell cell.accessoryType = UITableViewCellAccessoryDisclosureIndicator; // Sets the detailtext for the cell (subtitle) //cell.detailTextLabel.text = [NSString stringWithFormat:@"This is row: %i", row + 1]; return cell; } // Optional // Returns the number of section in a table view -(NSInteger) numberOfSectionsInTableView:(UITableView *)tableView { return 1; } #pragma mark - #pragma mark Table View delegate methods // Return the height for each cell -(CGFloat) tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath { return 78; } // Sets the title for header in the tableview -(NSString *) tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section { return @"Decors"; } // Sets the title for footer -(NSString *) tableView:(UITableView *)tableView titleForFooterInSection:(NSInteger)section { return @"Decors"; } // Sets the indentation for rows -(NSInteger) tableView:(UITableView *)tableView indentationLevelForRowAtIndexPath:(NSIndexPath *)indexPath { return 0; } // Method that gets called from the "Done" button (From the @selector in the line - [viewControllerToShow.navigationItem setRightBarButtonItem:[[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemDone target:self action:@selector(dismissView)] autorelease]];) - (void)dismissView { [self dismissViewControllerAnimated:YES completion:NULL]; } // This method is run when the user taps the row in the tableview - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { [tableView deselectRowAtIndexPath:indexPath animated:YES]; SelectedCellViewController *viewControllerToShow = [[SelectedCellViewController alloc] initWithNibName:@"SelectedCellViewController" bundle:[NSBundle mainBundle]]; [viewControllerToShow setLabelText:[NSString stringWithFormat:@"You selected cell: %d - %@", indexPath.row, [sitesArray objectAtIndex:indexPath.row]]]; [viewControllerToShow setImage:(UIImage *)[imagesArray objectAtIndex:indexPath.row]]; [viewControllerToShow setModalPresentationStyle:UIModalPresentationFormSheet]; [viewControllerToShow setModalTransitionStyle:UIModalTransitionStyleFlipHorizontal]; [viewControllerToShow.navigationItem setRightBarButtonItem:[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemDone target:self action:@selector(dismissView)]]; UINavigationController *navController = [[UINavigationController alloc] initWithRootViewController:viewControllerToShow]; viewControllerToShow = nil; [self presentViewController:navController animated:YES completion:NULL]; navController = nil; // UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Tapped row!" // message:[NSString stringWithFormat:@"You tapped: %@", [sitesArray objectAtIndex:indexPath.row]] // delegate:nil // cancelButtonTitle:@"Yes, I did!" // otherButtonTitles:nil]; // [alert show]; // [alert release]; } #pragma mark - Memory management - (void)didReceiveMemoryWarning { NSLog(@"Memory Warning!"); [super didReceiveMemoryWarning]; } - (void)viewDidUnload { self.sitesArray = nil; self.imagesArray = nil; [super viewDidUnload]; } //- (void)dealloc { //[sitesArray release]; //[imagesArray release]; // [super dealloc]; //} //@end //- (void)viewDidUnload //{ // [super viewDidUnload]; // Release any retained subviews of the main view. //} - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { if ([[UIDevice currentDevice] userInterfaceIdiom] == UIUserInterfaceIdiomPhone) { return (interfaceOrientation != UIInterfaceOrientationPortraitUpsideDown); } else { return YES; } } @end DecorsViewController_iPhone.h #import <UIKit/UIKit.h> @interface DecorsViewController_iPhone : UIViewController <UITableViewDelegate, UITableViewDataSource> { NSArray *sitesArray; NSArray *imagesArray; } @property (nonatomic, retain) NSArray *sitesArray; @property (nonatomic, retain) NSArray *imagesArray; @end SelectedCellViewController.m #import "SelectedCellViewController.h" @implementation SelectedCellViewController @synthesize labelText; @synthesize image; - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { if ((self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil])) { } return self; } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; } #pragma mark - View lifecycle - (void)viewDidLoad { [super viewDidLoad]; [label setText:self.labelText]; [imageView setImage:self.image]; } - (void)viewDidUnload { self.labelText = nil; self.image = nil; // [label release]; // [imageView release]; [super viewDidUnload]; } - (BOOL)shouldAutorotateToInterfaceOrientation: (UIInterfaceOrientation)interfaceOrientation { return (interfaceOrientation == UIInterfaceOrientationPortrait); } @end SelectedCellViewController.h @interface SelectedCellViewController : UIViewController { NSString *labelText; UIImage *image; IBOutlet UILabel *label; IBOutlet UIImageView *imageView; } @property (nonatomic, copy) NSString *labelText; @property (nonatomic, retain) UIImage *image; @end

Read the article

@ContextConfiguration in Spring 3.0 give me No default constructor found

- by atomsfat

I have already do the test using AbstractDependencyInjectionSpringContextTests and it works but in spring 3 it is deprecated, so I decided to try @ContextConfiguration but spring say that default constructor is not found, I check and the class doesn't have any constructor. If I use this test spring give the object. package atoms.portales.servicios.impl; import atoms.portales.model.Cliente; import atoms.portales.servicios.ClienteService; import java.util.List; import javax.persistence.EntityManager; import org.springframework.test.AbstractDependencyInjectionSpringContextTests; /** * * @author tsalazar */ public class ClienteServiceImplDeTest extends AbstractDependencyInjectionSpringContextTests{ private ClienteService clienteService; public ClienteService getClienteService() { return clienteService; } public void setClienteService(ClienteService clienteService) { this.clienteService = clienteService; } public ClienteServiceImplDeTest(String testName) { super(testName); } @Override protected String[] getConfigLocations() { return new String[]{"PersistenceAppCtx.xml", "ServicesAppCtx.xml"}; } /** * Test of buscaCliente method, of class ClienteServiceImplDeTest. */ public void testBuscaCliente() { System.out.println("======================================="); System.out.println("buscaCliente"); String nombre = ""; System.out.println(clienteService); System.out.println("======================================="); } } But if I use this, spring say that default constructor is not found. package atoms.config.portales.servicios.impl; import atoms.portales.model.Cliente; import atoms.portales.servicios.ClienteService; import org.junit.runner.RunWith; import org.junit.Test; import org.springframework.beans.factory.annotation.Autowired; import org.springframework.test.context.ContextConfiguration; import org.springframework.test.context.junit4.SpringJUnit4ClassRunner; import org.springframework.test.context.transaction.TransactionConfiguration; import org.springframework.transaction.annotation.Transactional; /** * * @author tsalazar */ @RunWith(SpringJUnit4ClassRunner.class) @ContextConfiguration(locations = {"/PersistenceAppCtx.xml", "/ServicesAppCtx.xml"}) @TransactionConfiguration(transactionManager = "transactionManager") @Transactional public class ClienteServiceImplTest { @Autowired private ClienteService clienteService; /** * Test of buscaCliente method, of class ClienteServiceImpl. */ @Test public void testBuscaCliente() { System.out.println("======================================="); System.out.println("buscaCliente"); System.out.println(clienteService); System.out.println("======================================="); } } This how I do the implementacion: package atoms.portales.servicios; import atoms.portales.model; /** * Una interface para obtener clientes, con sus surcursales, servicios, layouts * y contratos. Tambien soporta operaciones CRUD. * @author tsalazar */ public interface ClienteService { /** * Busca clientes a partir del nombre * @param nombre */ public Cliente buscaCliente(String nombre); } the implemetacion package atoms.portales..servicios.impl; import atoms.portales.model.Cliente; import atoms.portales.servicios.ClienteService; import javax.persistence.EntityManager; import javax.persistence.PersistenceContext; import org.springframework.stereotype.Repository; import org.springframework.stereotype.Service; import org.springframework.transaction.annotation.Transactional; /** * A JPA-based implementation.Delegates to a JPA entity manager to issue data access calls * against the backing repository. The EntityManager reference is provided by the managing container (Spring) * automatically. */ @Service("clienteSerivice") @Repository public class ClienteServiceImpl implements ClienteService { public ClienteServiceImpl() { } private EntityManager em; @PersistenceContext public void setEntityManager(EntityManager em) { this.em = em; } @Transactional(readOnly = true) public Cliente buscaCliente(String nombre) { Cliente cliente = em.getReference(Cliente.class, 1l); return cliente; } } spring configuration: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tx="http://www.springframework.org/schema/tx" xsi:schemaLocation=" http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.5.xsd http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-2.5.xsd">  <tx:annotation-driven />  <bean id="transactionManager" class="org.springframework.orm.jpa.JpaTransactionManager"> <property name="entityManagerFactory" ref="entityManagerFactory" /> </bean>  <bean id="entityManagerFactory" class="org.springframework.orm.jpa.LocalContainerEntityManagerFactoryBean"> <property name="dataSource" ref="dataSource" /> <property name="jpaVendorAdapter"> <bean class="org.springframework.orm.jpa.vendor.HibernateJpaVendorAdapter" /> </property> </bean>  <bean id="dataSource" class="org.springframework.jdbc.datasource.DriverManagerDataSource"> <property name="driverClassName" value="org.hsqldb.jdbcDriver" /> <property name="url" value="jdbc:hsqldb:hsql://localhost/test" /> <property name="username" value="sa" /> <property name="password" value="" /> </bean> <context:component-scan base-package="atoms.portales.servicios" /> </beans> This is the persistence.xml <?xml version="1.0" encoding="UTF-8"?> <persistence xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd" version="1.0"> <persistence-unit name="configuradorPortales" transaction-type="RESOURCE_LOCAL"> <provider>org.hibernate.ejb.HibernatePersistence</provider> <class>atoms.portales.model.Cliente</class> <properties> <property name="hibernate.dialect" value="org.hibernate.dialect.HSQLDialect"/> <property name="hibernate.hbm2ddl.auto" value="create-drop"/> <property name="hibernate.show_sql" value="true"/> <property name="hibernate.cache.provider_class" value="org.hibernate.cache.HashtableCacheProvider"/> </properties> </persistence-unit> </persistence> This is the error that give me:

Read the article

Java homework help, Error <identifier> expected

- by user2900126

Help with java homework this is my assignment that I have, this assignment code I've tried. But when I try to compile it I keep getting errors which I cant seem to find soloutions too: Error says <identifier> expected for Line 67 public static void () Assignment brief To write a simple java classMobile that models a mobile phone. Details the information stored about each mobile phone will include • Its type e.g. “Sony ericsson x90” or “Samsung Galaxy S”; • Its screen size in inches; You may assume that this a whole number from the scale 3 to 5 inclusive. • Its memory card capacity in gigabytes You may assume that this a whole number • The name of its present service provider You may assume this is a single line of text. • The type of contract with service provider You may assume this is a single line of text. • Its camera resolution in megapixels; You should not assume that this a whole number; • The percentage of charge left on the phone e.g. a fully charged phone will have a charge of 100. You may assume that this a whole number • Whether the phone has GPS or not. Your class will have fields corresponding to these attributes . Start by opening BlueJ, creating a new project called myMobile which has a classMobile and set up the fields that you need, Next you will need to write a Constructor for the class. Assume that each phone is manufactured by creating an object and specifying its type, its screen size, its memory card capacity, its camera resolution and whether it has GPS or not. Therefore you will need a constructor that allows you to pass arguments to initialise these five attributes. Other fields should be set to appropriate default values. You may assume that a new phone comes fully charged. When the phone is sold to its owner, you will need to set the service provider and type of contract with that provider so you will need mutator methods • setProvider () - - to set service provider. • setContractType - - to set the type of contract These methods will be used when the phones provider is changed. You should also write a mutator method ChargeUp () which simulates fully charging the phone. To obtain information about your mobile object you should write • accessor methods corresponding to four of its fields: • getType () – which returns the type of mobile; • getProvider () – which returns the present service provider; • getContractType () – which returns its type of contract; • getCharge () – which returns its remaining charge. An accessor method to printDetails () to print, to the terminal window, a report about the phone e.g. This mobile phone is a sony Erricsson X90 with Service provider BigAl and type of contract PAYG. At present it has 30% of its battery charge remaining. Check that the new method works correctly by for example, • creating a Mobile object and setting its fields; • calling printDetails () and t=checking the report corresponds to the details you have just given the mobile; • changing the service provider and contract type by calling setprovider () and setContractType (); • calling printDetails () and checking the report now prints out the new details. Challenging excercises • write a mutator methodswitchedOnFor () =which simulates using the phone for a specified period. You may assume the phone loses 1% of its charge for each hour that it is switched on . • write an accessor method checkcharge () whichg checks the phone remaing charge. If this charge has a value less than 25%, then this method returns a string containg the message Be aware that you will soon need to re-charge your phone, otherwise it returns a string your phone charge is sufficient. • Write a method changeProvider () which simulates changing the provider (and presumably also the type of service contract). Finally you may add up to four additional fields, with appropriate methods, that might be required in a more detailed model. above is my assignment that I have, this assignment code I've tried. But when I try to oompile it I keep getting errors which I cant seem to find soloutions too: Error says <identifier> expected for Line 67 public static void () /** * to write a simple java class Mobile that models a mobile phone. * * @author (Lewis Burte-Clarke) * @version (14/10/13) */ public class Mobile { // type of phone private String phonetype; // size of screen in inches private int screensize; // menory card capacity private int memorycardcapacity; // name of present service provider private String serviceprovider; // type of contract with service provider private int typeofcontract; // camera resolution in megapixels private int cameraresolution; // the percentage of charge left on the phone private int checkcharge; // wether the phone has GPS or not private String GPS; // instance variables - replace the example below with your own private int x; // The constructor method public Mobile(String mobilephonetype, int mobilescreensize, int mobilememorycardcapacity,int mobilecameraresolution,String mobileGPS, String newserviceprovider) { this.phonetype = mobilephonetype; this.screensize = mobilescreensize; this.memorycardcapacity = mobilememorycardcapacity; this.cameraresolution = mobilecameraresolution; this.GPS = mobileGPS; // you do not use this ones during instantiation,you can remove them if you do not need or assign them some default values //this.serviceprovider = newserviceprovider; //this.typeofcontract = 12; //this.checkcharge = checkcharge; Mobile samsungPhone = new Mobile("Samsung", "1024", "2", "verizon", "8", "GPS"); 1024 = screensize; 2 = memorycardcapacity; 8 = resolution; GPS = gps; "verizon"=serviceprovider; //typeofcontract = 12; //checkcharge = checkcharge; } // A method to display the state of the object to the screen public void displayMobileDetails() { System.out.println("phonetype: " + phonetype); System.out.println("screensize: " + screensize); System.out.println("memorycardcapacity: " + memorycardcapacity); System.out.println("cameraresolution: " + cameraresolution); System.out.println("GPS: " + GPS); System.out.println("serviceprovider: " + serviceprovider); System.out.println("typeofcontract: " + typeofcontract); } /** * The mymobile class implements an application that * simply displays "new Mobile!" to the standard output. */ public class mymobile { public static void main(String[] args) { System.out.println("new Mobile!"); //Display the string. } } public static void buildPhones(){ Mobile Samsung = new Mobile("Samsung", "3.0", "4gb", "8mega pixels", "GPS"); Mobile Blackberry = new Mobile("Blackberry", "3.0", "4gb", "8mega pixels", "GPS"); Samsung.displayMobileDetails(); Blackberry.displayMobileDetails(); } public static void main(String[] args) { buildPhones(); } } any answers.replies and help would be greatly appreciated as I really lost!

Read the article

SINGLE SIGN ON SECURITY THREAT! FACEBOOK access_token broadcast in the open/clear

- by MOKANA

Subsequent to my posting there was a remark made that this was not really a question but I thought I did indeed postulate one. So that there is no ambiquity here is the question with a lead in: Since there is no data sent from Facebook during the Canvas Load process that is not at some point divulged, including the access_token, session and other data that could uniquely identify a user, does any one see any other way other than adding one more layer, i.e., a password, sent over the wire via HTTPS along with the access_toekn, that will insure unique untampered with security by the user? Using Wireshark I captured the local broadcast while loading my Canvas Application page. I was hugely surprised to see the access_token broadcast in the open, viewable for any one to see. This access_token is appended to any https call to the Facebook OpenGraph API. Using facebook as a single click log on has now raised huge concerns for me. It is stored in a session object in memory and the cookie is cleared upon app termination and after reviewing the FB.Init calls I saw a lot of HTTPS calls so I assumed the access_token was always encrypted. But last night I saw in the status bar a call from what was simply an http call that included the App ID so I felt I should sniff the Application Canvas load sequence. Today I did sniff the broadcast and in the attached image you can see that there are http calls with the access_token being broadcast in the open and clear for anyone to gain access to. Am I missing something, is what I am seeing and my interpretation really correct. If any one can sniff and get the access_token they can theorically make calls to the Graph API via https, even though the call back would still need to be the site established in Facebook's application set up. But what is truly a security threat is anyone using the access_token for access to their own site. I do not see the value of a single sign on via Facebook if the only thing that was established as secure was the access_token - becuase for what I can see it clearly is not secure. Access tokens that never have an expire date do not change. Access_tokens are different for every user, to access to another site could be held tight to just a single user, but compromising even a single user's data is unacceptable. http://www.creatingstory.com/images/InTheOpen.png Went back and did more research on this: FINDINGS: Went back an re ran the canvas application to verify that it was not any of my code that was not broadcasting. In this call: HTTP GET /connect.php/en_US/js/CacheData HTTP/1.1 The USER ID is clearly visible in the cookie. So USER_ID's are fully visible, but they are already. Anyone can go to pretty much any ones page and hover over the image and see the USER ID. So no big threat. APP_ID are also easily obtainable - but . . . http://www.creatingstory.com/images/InTheOpen2.png The above file clearly shows the FULL ACCESS TOKEN clearly in the OPEN via a Facebook initiated call. Am I wrong. TELL ME I AM WRONG because I want to be wrong about this. I have since reset my app secret so I am showing the real sniff of the Canvas Page being loaded. Additional data 02/20/2011: @ifaour - I appreciate the time you took to compile your response. I am pretty familiar with the OAuth process and have a pretty solid understanding of the signed_request unpacking and utilization of the access_token. I perform a substantial amount of my processing on the server and my Facebook server side flows are all complete and function without any flaw that I know of. The application secret is secure and never passed to the front end application and is also changed regularly. I am being as fanatical about security as I can be, knowing there is so much I don’t know that could come back and bite me. Two huge access_token issues: The issues concern the possible utilization of the access_token from the USER AGENT (browser). During the FB.INIT() process of the Facebook JavaScript SDK, a cookie is created as well as an object in memory called a session object. This object, along with the cookie contain the access_token, session, a secret, and uid and status of the connection. The session object is structured such that is supports both the new OAuth and the legacy flows. With OAuth, the access_token and status are pretty much al that is used in the session object. The first issue is that the access_token is used to make HTTPS calls to the GRAPH API. If you had the access_token, you could do this from any browser: https://graph.facebook.com/220439?access_token=... and it will return a ton of information about the user. So any one with the access token can gain access to a Facebook account. You can also make additional calls to any info the user has granted access to the application tied to the access_token. At first I thought that a call into the GRAPH had to have a Callback to the URL established in the App Setup, but I tested it as mentioned below and it will return info back right into the browser. Adding that callback feature would be a good idea I think, tightens things up a bit. The second issue is utilization of some unique private secured data that identifies the user to the third party data base, i.e., like in my case, I would use a single sign on to populate user information into my database using this unique secured data item (i.e., access_token which contains the APP ID, the USER ID, and a hashed with secret sequence). None of this is a problem on the server side. You get a signed_request, you unpack it with secret, make HTTPS calls, get HTTPS responses back. When a user has information entered via the USER AGENT(browser) that must be stored via a POST, this unique secured data element would be sent via HTTPS such that they are validated prior to data base insertion. However, If there is NO secured piece of unique data that is supplied via the single sign on process, then there is no way to guarantee unauthorized access. The access_token is the one piece of data that is utilized by Facebook to make the HTTPS calls into the GRAPH API. it is considered unique in regards to BOTH the USER and the APPLICATION and is initially secure via the signed_request packaging. If however, it is subsequently transmitted in the clear and if I can sniff the wire and obtain the access_token, then I can pretend to be the application and gain the information they have authorized the application to see. I tried the above example from a Safari and IE browser and it returned all of my information to me in the browser. In conclusion, the access_token is part of the signed_request and that is how the application initially obtains it. After OAuth authentication and authorization, i.e., the USER has logged into Facebook and then runs your app, the access_token is stored as mentioned above and I have sniffed it such that I see it stored in a Cookie that is transmitted over the wire, resulting in there being NO UNIQUE SECURED IDENTIFIABLE piece of information that can be used to support interaction with the database, or in other words, unless there were one more piece of secure data sent along with the access_token to my database, i.e., a password, I would not be able to discern if it is a legitimate call. Luckily I utilized secure AJAX via POST and the call has to come from the same domain, but I am sure there is a way to hijack that. I am totally open to any ideas on this topic on how to uniquely identify my USERS other than adding another layer (password) via this single sign on process or if someone would just share with me that I read and analyzed my data incorrectly and that the access_token is always secure over the wire. Mahalo nui loa in advance.

Read the article

Create a class that inherets DrawableGameComponent in XNA as a CLASS with custom functions

- by user3675013

using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Media; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Content; namespace TileEngine { class Renderer : DrawableGameComponent { public Renderer(Game game) : base(game) { } SpriteBatch spriteBatch ; protected override void LoadContent() { base.LoadContent(); } public override void Draw(GameTime gameTime) { base.Draw(gameTime); } public override void Update(GameTime gameTime) { base.Update(gameTime); } public override void Initialize() { base.Initialize(); } public RenderTarget2D new_texture(int width, int height) { Texture2D TEX = new Texture2D(GraphicsDevice, width, height); //create the texture to render to RenderTarget2D Mine = new RenderTarget2D(GraphicsDevice, width, height); GraphicsDevice.SetRenderTarget(Mine); //set the render device to the reference provided //maybe base.draw can be used with spritebatch. Idk. We'll see if the order of operation //works out. Wish I could call base.draw here. return Mine; //I'm hoping that this returns the same instance and not a copy. } public void draw_texture(int width, int height, RenderTarget2D Mine) { GraphicsDevice.SetRenderTarget(null); //Set the renderer to render to the backbuffer again Rectangle drawrect = new Rectangle(0, 0, width, height); //Set the rendering size to what we want spriteBatch.Begin(); //This uses spritebatch to draw the texture directly to the screen spriteBatch.Draw(Mine, drawrect, Color.White); //This uses the color white spriteBatch.End(); //ends the spritebatch //Call base.draw after this since it doesn't seem to recognize inside the function //maybe base.draw can be used with spritebatch. Idk. We'll see if the order of operation //works out. Wish I could call base.draw here. } } } I solved a previous issue where I wasn't allowed to access GraphicsDevice outside the main Default 'main' class Ie "Game" or "Game1" etc. Now I have a new issue. FYi no one told me that it would be possible to use GraphicsDevice References to cause it to not be null by using the drawable class. (hopefully after this last bug is solved it doesn't still return null) Anyways at present the problem is that I can't seem to get it to initialize as an instance in my main program. Ie Renderer tileClipping; and I'm unable to use it such as it is to be noted i haven't even gotten to testing these two steps below but before it compiled but when those functions of this class were called it complained that it can't render to a null device. Which meant that the device wasn't being initialized. I had no idea why. It took me hours to google this. I finally figured out the words I needed.. which were "do my rendering in XNA in a seperate class" now I haven't used the addcomponent function because I don't want it to only run these functions automatically and I want to be able to call the custom ones. In a nutshell what I want is: *access to rendering targets and graphics device OUTSIDE default class *passing of Rendertarget2D (which contain textures and textures should automatically be passed with a rendering target? ) *the device should be passed to this function as well OR the device should be passed to this function as a byproduct of passing the rendertarget (which is automatically associated with the render device it was given originally) *I'm assuming I'm dealing with abstracted pointers here so when I pass a class object or instance, I should be recieving the SAME object , I referenced, and not a copy that has only the lifespan of the function running. *the purpose for all these options: I want to initialize new 2d textures on the fly to customize tileclipping and even the X , y Offsets of where a WHOLE texture will be rendered, and the X and Y offsets of where tiles will be rendered ON that surface. This is why. And I'll be doing region based lighting effects per tile or even per 8X8 pixel spaces.. we'll see I'll also be doing sprite rotations on the whole texture then copying it again to a circular masked texture, and then doing a second copy for only solid tiles for masked rotated collisions on sprites. I'll be checking the masked pixels for my collision, and using raycasting possibly to check for collisions on those areas. The sprite will stay in the center, when this rotation happens. Here is a detailed diagram: http://i.stack.imgur.com/INf9K.gif I'll be using texture2D for steps 4-6 I suppose for steps 1 as well. Now ontop of that, the clipping size (IE the sqaure rendered) will be able to be shrunk or increased, on a per frame basis Therefore I can't use the same static size for my main texture2d and I can't use just the backbuffer Or we get the annoying flicker. Also I will have multiple instances of the renderer class so that I can freely pass textures around as if they are playing cards (in a sense) layering them ontop of eachother, cropping them how i want and such. and then using spritebatch to simply draw them at the locations I want. Hopefully this makes sense, and yes I will be planning on using alpha blending but only after all tiles have been drawn.. The masked collision is important and Yes I am avoiding using math on the tile rendering and instead resorting to image manipulation in video memory which is WHY I need this to work the way I'm intending it to work and not in the default way that XNA seems to handle graphics. Thanks to anyone willing to help. I hate the code form offered, because then I have to rely on static presence of an update function. What if I want to kill that update function or that object, but have it in memory, but just have it temporarily inactive? I'm making the assumption here the update function of one of these gamecomponents is automatic ? Anyways this is as detailed as I can make this post hopefully someone can help me solve the issue. Instead of tell me "derrr don't do it this wayyy" which is what a few people told me (but they don't understand the actual goal I have in mind) I'm trying to create basically a library where I can copy images freely no matter the size, i just have to specify the size in the function then as long as a reference to that object exists it should be kept alive? right? :/ anyways.. Anything else? I Don't know. I understand object oriented coding but I don't understand this XNA It's beggining to feel impossible to do anything custom in it without putting ALL my rendering code into the draw function of the main class tileClipping.new_texture(GraphicsDevice, width, height) tileClipping.Draw_texture(...)

Read the article

Cacti: "An internal Net-Snmp error condition detected in Cacti snmp_count"

- by Recc

There's the odd forum topic about an error similarly obscure as this, but I haven't seen any for snmp_count in particular. Also I don't see graphing problems, though I can't simply go and eyeball all graphs. However the poller does time out and has to be stopped by its internal process preventing overruns. If I filter out the flood of this error in the log I dont get anything else except the poller timeout: 06/12/2014 12:48:00 PM - POLLER: Poller[0] Maximum runtime of 58 seconds exceeded. Exiting. 06/12/2014 12:48:00 PM - SYSTEM STATS: Time:58.8566 Method:spine Processes:1 Threads:40 Hosts:1923 HostsPerProcess:1923 DataSources:61584 RRDsProcessed:0 06/12/2014 12:48:00 PM - SPINE: Poller[0] ERROR: Spine Timed Out While Processing Hosts Internal I saw in the running processes /usr/local/spine/spine 0 2053 that's always left behind. When I kill it the flooding of the error stops. Of course it's the same on the next poll run as it goes through the devices. 2053 is apparently the DB ID for a device. I deleted it completely to see if that stops it. It doesn't, instead 2052 is seen there. I suspect It'll be the same if I keep deleting devices which I will not do. This started happening midday when I wasn't doing anything to the cacti server. I have tried reducing Maximum Threads per Process to 1 and Number of PHP Script Servers to 1. I've been running it at 10 script servers / 40 threads for months with poll cycle time of about 20 sec. I just found out Running snmpwalk on any host would begin returning the values but then timeout halfway through. This doesn't happen from different servers on the network this Cacti is suggesting still that it's a problem with it locally. Any suggestions? For one polling cycle I changed to use cmd.php instead. then I started getting errors like CMDPHP: Poller[0] Host[45] DS[541] WARNING: Result from SNMP not valid. Partial Result: U Perhaps as expected. Looking closely I see that every snmpwalk I do is interrupted at the same place as if some byte limit is hit and the connection torn down.

Read the article

DHCP "no answer" on CentOS 6.4

- by Kev

I installed a DHCP server (yum install dhcp) and this is my conf: # create new # specify domain name option domain-name "mydomain.name"; # specify DNS's hostname or IP address option domain-name-servers 10.0.1.1, 10.0.1.2; option ntp-servers 10.0.1.1, 10.0.1.2; allow unknown-clients; # default lease time default-lease-time 2628000; # max lease time max-lease-time 2628000; # about a month # this DHCP server to be declared valid authoritative; # specify network address and subnet mask subnet 10.0.0.0 netmask 255.0.0.0 { # specify the range of lease IP address range dynamic-bootp 10.0.2.1 10.0.2.50; # specify broadcast address option broadcast-address 10.255.255.255; # specify default gateway option routers 10.0.0.1; allow unknown-clients; } service dhcp start reports [ OK ]. Yet, if I disable my other DHCP server (Win2k3) and get a client to try renewing its IP lease, it times out. So I installed dhcping. No matter what options I try, including directing dhcping at my server, adding a client address in the range, adding my hardware address, it replies 'no answer'. I'm also trying -i since that seems to be more akin to what a WinXP client would try to do, based on /var/log/messages. It logs the attempts (from dhcping here) as: Oct 24 18:55:13 newdc dhcpd: DHCPINFORM from 10.0.2.15 via eth0:4 Oct 24 18:55:13 newdc dhcpd: DHCPACK to 10.0.2.15 (00:11:25:66:4e:7f) via eth0:4 Oct 24 18:55:13 newdc dhcpd: DHCPINFORM from 10.0.2.15 via eth0:3 Oct 24 18:55:13 newdc dhcpd: DHCPACK to 10.0.2.15 (00:11:25:66:4e:7f) via eth0:3 Oct 24 18:55:13 newdc dhcpd: DHCPINFORM from 10.0.2.15 via eth0 Oct 24 18:55:13 newdc dhcpd: DHCPACK to 10.0.2.15 (00:11:25:66:4e:7f) via eth0 The :3 and :4 are because I have a few extra Host(A) records for this server so it responds on more than one IP for our intranet app. No answer? It sounds like it should be getting three answers...no? (And if that's the problem, how do I limit the DHCP service to replying from eth0?)

Read the article

ubuntu bind9 AppArmor read permission denied (chroot jail)

- by Richard Whitman

I am trying to run bind9 with chroot jail. I followed the steps mentioned at : http://www.howtoforge.com/debian_bind9_master_slave_system I am getting the following errors in my syslog: Jul 27 16:53:49 conf002 named[3988]: starting BIND 9.7.3 -u bind -t /var/lib/named Jul 27 16:53:49 conf002 named[3988]: built with '--prefix=/usr' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc/bind' '--localstatedir=/var' '--enable-threads' '--enable-largefile' '--with-libtool' '--enable-shared' '--enable-static' '--with-openssl=/usr' '--with-gssapi=/usr' '--with-gnu-ld' '--with-dlz-postgres=no' '--with-dlz-mysql=no' '--with-dlz-bdb=yes' '--with-dlz-filesystem=yes' '--with-dlz-ldap=yes' '--with-dlz-stub=yes' '--with-geoip=/usr' '--enable-ipv6' 'CFLAGS=-fno-strict-aliasing -DDIG_SIGCHASE -O2' 'LDFLAGS=-Wl,-Bsymbolic-functions' 'CPPFLAGS=' Jul 27 16:53:49 conf002 named[3988]: adjusted limit on open files from 4096 to 1048576 Jul 27 16:53:49 conf002 named[3988]: found 4 CPUs, using 4 worker threads Jul 27 16:53:49 conf002 named[3988]: using up to 4096 sockets Jul 27 16:53:49 conf002 named[3988]: loading configuration from '/etc/bind/named.conf' Jul 27 16:53:49 conf002 named[3988]: none:0: open: /etc/bind/named.conf: permission denied Jul 27 16:53:49 conf002 named[3988]: loading configuration: permission denied Jul 27 16:53:49 conf002 named[3988]: exiting (due to fatal error) Jul 27 16:53:49 conf002 kernel: [74323.514875] type=1400 audit(1343433229.352:108): apparmor="DENIED" operation="open" parent=3987 profile="/usr/sbin/named" name="/var/lib/named/etc/bind/named.conf" pid=3992 comm="named" requested_mask="r" denied_mask="r" fsuid=103 ouid=103 Looks like the process can not read the file /var/lib/named/etc/bind/named.conf. I have made sure that the owner of this file is user bind, and it has the read/write access to it: root@test:/var/lib/named/etc/bind# ls -atl total 64 drwxr-xr-x 3 bind bind 4096 2012-07-27 16:35 .. drwxrwsrwx 2 bind bind 4096 2012-07-27 15:26 zones drwxr-sr-x 3 bind bind 4096 2012-07-26 21:36 . -rw-r--r-- 1 bind bind 666 2012-07-26 21:33 named.conf.options -rw-r--r-- 1 bind bind 514 2012-07-26 21:18 named.conf.local -rw-r----- 1 bind bind 77 2012-07-25 00:25 rndc.key -rw-r--r-- 1 bind bind 2544 2011-07-14 06:31 bind.keys -rw-r--r-- 1 bind bind 237 2011-07-14 06:31 db.0 -rw-r--r-- 1 bind bind 271 2011-07-14 06:31 db.127 -rw-r--r-- 1 bind bind 237 2011-07-14 06:31 db.255 -rw-r--r-- 1 bind bind 353 2011-07-14 06:31 db.empty -rw-r--r-- 1 bind bind 270 2011-07-14 06:31 db.local -rw-r--r-- 1 bind bind 2994 2011-07-14 06:31 db.root -rw-r--r-- 1 bind bind 463 2011-07-14 06:31 named.conf -rw-r--r-- 1 bind bind 490 2011-07-14 06:31 named.conf.default-zones -rw-r--r-- 1 bind bind 1317 2011-07-14 06:31 zones.rfc1918 What could be wrong here?

Read the article

Oracle 9i Session Disconnections

- by mlaverd

I am in a development environment, and our test Oracle 9i server has been misbehaving for a few days now. What happens is that we have our JDBC connections disconnecting after a few successful connections. We got this box set up by our IT department and handed over to. It is 'our problem', so options like 'ask you DBA' isn't going to help me. :( Our server is set up with 3 plain databases (one is the main dev db, the other is the 'experimental' dev db). We use the Oracle 10 ojdbc14.jar thin JDBC driver (because of some bug in the version 9 of the driver). We're using Hibernate to talk to the DB. The only thing that I can see that changed is that we now have more users connecting to the server. Instead of one developer, we now have 3. With the Hibernate connection pools, I'm thinking that maybe we're hitting some limit? Anyone has any idea what's going on? Here's the stack trace on the client: Caused by: org.hibernate.exception.GenericJDBCException: could not execute query at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:126) [hibernate3.jar:na] at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:114) [hibernate3.jar:na] at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66) [hibernate3.jar:na] at org.hibernate.loader.Loader.doList(Loader.java:2235) [hibernate3.jar:na] at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2129) [hibernate3.jar:na] at org.hibernate.loader.Loader.list(Loader.java:2124) [hibernate3.jar:na] at org.hibernate.loader.hql.QueryLoader.list(QueryLoader.java:401) [hibernate3.jar:na] at org.hibernate.hql.ast.QueryTranslatorImpl.list(QueryTranslatorImpl.java:363) [hibernate3.jar:na] at org.hibernate.engine.query.HQLQueryPlan.performList(HQLQueryPlan.java:196) [hibernate3.jar:na] at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1149) [hibernate3.jar:na] at org.hibernate.impl.QueryImpl.list(QueryImpl.java:102) [hibernate3.jar:na] ... Caused by: java.sql.SQLException: Io exception: Connection reset at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:829) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1049) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:854) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1154) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3370) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3415) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at org.hibernate.jdbc.AbstractBatcher.getResultSet(AbstractBatcher.java:208) [hibernate3.jar:na] at org.hibernate.loader.Loader.getResultSet(Loader.java:1812) [hibernate3.jar:na] at org.hibernate.loader.Loader.doQuery(Loader.java:697) [hibernate3.jar:na] at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259) [hibernate3.jar:na] at org.hibernate.loader.Loader.doList(Loader.java:2232) [hibernate3.jar:na]

Read the article

IRP_MJ_WRITE latency up to 15 seconds

- by racitup

We have written an application that performs small (22kB) writes to multiple files at once (one thread performing asynchronous queued writes to multiple locations on behalf of other threads) on the same local volume (RAID1). 99.9% of the writes are low-latency but occasionally (maybe every minute or two) we get one or two huge latency writes (I have seen 10 seconds and above) without any real explanation. Platform: Win2003 Server with NTFS. Monitoring: Sysinternals Process Monitor (see link below) and our own application logging. We have tried multiple things to try and solve this that have been gleaned from a few websites, e.g.: Making the first part of file names unique to aid 8.3 name generation Writing files to multiple directories Changing Intel Disk Write Caching Windows File/Printer Sharing Minimize memory used Balance Maximize data throughput for file sharing Maximize data throughput for network applications System-Advanced-Performance-Advanced NtfsDisableLastAccessUpdate - use fsutil behavior set disablelastaccess 1 disable 8.3 name generation - use "fsutil behavior set disable8dot3 1" + restart Enable a large size file system cache Disable paging of the kernel code IO Page Lock Limit Turn Off (or On) the Indexing Service But nothing seems to make much difference. There's a whole host of things we haven't tried yet but we wondered if anyone had come across the same problem, a reason and a solution (programmatic or not)? We can reproduce the problem using IOMeter and a simple setup: Start IOMeter and remove all but the first worker thread in 'Topology' using the disconnect button. Select the Worker thread and put a cross in the box next to the disk you want to use in the Disk Targets tab and put '2000000' in Maximum Disk Size (NOTE: must have at least 1GB free space; sector size is 512 bytes) Next create a new access specification and add it to the worker thread: Transfer Request Size = 22kB 100% Sequential Percent of Access Spec = 100% Percent Read/Write = 100% Write Change Results Display Update Frequency to 5 seconds, Test Setup Run Time to 20 seconds and both 'Number of Workers to Spawn Automatically' settings to zero. Select the Worker Thread in the Topology panel and hit the Duplicate Worker button 59 times to create 60 threads with identical settings. Hit the 'Go' button (green flag) and monitor the Results tab. The 'Maximum I/O Response Time (ms)' always hits at least 3500 on our machine. Our machine isn't exactly slow (Xeon 8 core rack server with 4GB and onboard RAID). I'd be interested to see what other people get. We have a feeling it might be something to do with the NTFS filesystem (ours is currently 75% full of fragmented files) and we are going to try a few things around this principle. But it is also related to disk performance since we don't see it on a RAMDisk and it's not as severe on a RAID10 array. Any help is much appreciated. Richard Right-click and select 'Open Link in New Tab': ProcMon Result

Read the article

Veewee, Vagrant, Puppet, Erlang and RabbitMQ

- by Tobias

I am kinda stuck with a problem I am trying to wrap my head around for days now. Here is what I am doing: By using Veewee, I am creating a VirtualBox image and then I create a Vagrant box from it. See here, here Finally I run puppet from Vagrant to install RabbitMQ, see here. Veewee, Vagrant and VirtualBox all run on MacOS X 10.7.4. The vagrant box itself is CentOS 6.2. This worked fine for quite some time until I was recreating the VirtualBox image a couple of days ago. During installation of the rabbitmq-plugins during my puppet run I now get the following error: /Stage[main]/Rabbitmq/Exec[rabbitmq-plugins]/returns: erlexec: HOME must be set My RabbitMQ puppet configuration can be found on my GitHub repo for that project, but here is the most important part: $version = "2.8.7" $url = "http://www.rabbitmq.com/releases/rabbitmq-server/v${version}/rabbitmq-server-${version}-1.noarch.rpm" package{"erlang": ensure => "present", } package{"rabbitmq-server": provider => "rpm", source => $url, require => Package["erlang"] } exec{"rabbitmq-plugins": path => "/usr/bin:/usr/sbin:/bin", command => "rabbitmq-plugins enable rabbitmq_management", require => Package["rabbitmq-server"] } My additional repositories, e.g. epel, are defined in veewees postinstall.sh right at the top of the file. Finally, this is what I get when I do '/etc/init.d/rabbitmq-server status' [{pid,2834}, {running_applications,[{rabbit,"RabbitMQ","2.8.7"}, {ssl,"Erlang/OTP SSL application","4.1.6"}, {public_key,"Public key infrastructure","0.13"}, {crypto,"CRYPTO version 2","2.0.4"}, {mnesia,"MNESIA CXC 138 12","4.5"}, {os_mon,"CPO CXC 138 46","2.2.7"}, {sasl,"SASL CXC 138 11","2.1.10"}, {stdlib,"ERTS CXC 138 10","1.17.5"}, {kernel,"ERTS CXC 138 10","2.14.5"}]}, {os,{unix,linux}}, {erlang_version,"Erlang R14B04 (erts-5.8.5) [source] [64-bit] [rq:1] [async-threads:30] [kernel-poll:true]\n"}, {memory,[{total,24993120}, {processes,10328496}, {processes_used,10321296}, {system,14664624}, {atom,1175905}, {atom_used,1143841}, {binary,17192}, {code,11416020}, {ets,766168}]}, {vm_memory_high_watermark,0.4}, {vm_memory_limit,205851852}, {disk_free_limit,1000000000}, {disk_free,7089795072}, {file_descriptors,[{total_limit,924}, {total_used,4}, {sockets_limit,829}, {sockets_used,2}]}, {processes,[{limit,1048576},{used,131}]}, {run_queue,0}, {uptime,6}] Sources in the web suggest, that I have to set HOME. Of course I was logging into the box if HOME was set, for user vagrant it was '/home/vagrant' and for root it was 'root'. As always, any hints/ideas/suggestions/assumptions are more than welcome. Thanks a lot! Cheers, Tobi

Read the article

Nginx and PHP-FPM running out of connections

- by E3pO

I keep running into errors like these, [02-Jun-2012 01:52:04] WARNING: [pool www] seems busy (you may need to increase pm.start_servers, or pm.min/max_spare_servers), spawning 8 children, there are 19 idle, and 49 total children [02-Jun-2012 01:52:05] WARNING: [pool www] seems busy (you may need to increase pm.start_servers, or pm.min/max_spare_servers), spawning 16 children, there are 19 idle, and 50 total children [02-Jun-2012 01:52:06] WARNING: [pool www] seems busy (you may need to increase pm.start_servers, or pm.min/max_spare_servers), spawning 32 children, there are 19 idle, and 51 total children [02-Jun-2012 03:10:51] WARNING: [pool www] seems busy (you may need to increase pm.start_servers, or pm.min/max_spare_servers), spawning 8 children, there are 18 idle, and 91 total children I changed my settings for php-fpm to these, pm.max_children = 150 (It was at 100, i got a max_children reached and upped to 150) pm.start_servers = 75 pm.min_spare_servers = 20 pm.max_spare_servers = 150 Resulting in [02-Jun-2012 01:39:19] WARNING: [pool www] server reached pm.max_children setting (150), consider raising it I've just launched a new website that is getting a conciderable amount of traffic on it. This traffic is legitimate and users are getting 504 gateway timeouts when the limit is reached. I have limited connections to my server with IPTABLES and I'm running fail2ban and keeping track of nginx access logs. The traffic is all legitimate, i'm just running out of room for users. I'm currently running on a dual core box with ubuntu 64bit. free total used free shared buffers cached Mem: 6114284 5726984 387300 0 141612 4985384 -/+ buffers/cache: 599988 5514296 Swap: 524284 5804 518480 My php.ini max_input_time = 60 My nginx config is worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 19000; # multi_accept on; } worker_rlimit_nofile 20000; #each connection needs a filehandle (or 2 if you are proxying) client_max_body_size 30M; client_body_timeout 10; client_header_timeout 10; keepalive_timeout 5 5; send_timeout 10; location ~ \.php$ { try_files $uri /er/error.php; fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 256 16k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_max_temp_file_size 0; fastcgi_intercept_errors on; fastcgi_pass unix:/tmp/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } What can I do to stop running out of connections? Why does this keep occurring? I'm monitoring my traffic on Google Analytics realtime and when the user count gets above about 120 my php-fpm.log is full of these warnings..

Read the article

DPM 2010 "Disk failed or disk not found"

- by SysAdmin

I have an HP Proliant ML110 G5 server with Windows server 2008R2 only dedicated for DPM 2010. This server has a limit in HD of 8TB which has already been met. I'm now stuck in this situation where my disk keeps failing "Disk failed or Disk not found" in the disk management. Only after I reboot the system the disk comes back up. Today I was running my monthly tape backup on a certain protection group and the disk failed again while the tape job was running (so the job wasn't completed). This is the description of the error in the alerts: "The disk Disk 1 - Hitachi HDS722020ALA330 SCSI Disk Device cannot be detected or has stopped responding. All subsequent protection activities that use this disk will fail until the disk is brought back online. (ID 3120)". My backup system is becoming useless! I don't think that is a hardware issue (please correct me if I'm wrong) since the HD works fine for a certain period of time which is becoming shorter and shorter. I basically have no more option to fix this problem. I tried to fix any error that was coming up in the event viewer with no luck (included one regarding the SQL2008 compatibility issue). The disk keeps failing! Now I'm only trying to recover/migrate the data from the disk that is having problem but my issue now is that I cannot add any drives to my server since I already got installed the maximum storage capacity 8TB. I thought about 2 simple options. Please tell me what you guys think about it; Unplug one of the 2 storage pool disks (disk0, that one without problem) from the machine and install a new one in order to migrate the data with the Migration tool for DPM. Remove the defective disk (disk1), put back the disk0 and run the synchronization/consistency check on all the groups to recreate replicas and recovery points. Run diskpart.exe and clean up the disk (loosing all data) and hoping that he will work after I sync all the protection groups. Both solutions are not elegant but I have no better options at the moment. Please I need some help. Thanks for your time Angelo

Read the article

Using Amazon S3 for multiple remote data site uploads, securely

- by Aitch

I've been playing about with Amazon S3 a little for the first time and like what I see for various reasons relating to my potential use case. We have multiple (online) remote server boxes harvesting sensor data that is regularly uploaded every hour or so (rsync'ed) to a VPS server. The number of remote server boxes is growing regularly and forecast to keep growing (hundreds). The servers are geographically dispersed. The servers are also automatically built, therefore generic with standard tools and not bespoke per location. The data is many hundreds of files per day. I want to avoid a situation where I need to provision more VPS storage, or additional servers every time we hit the VPS capacity limit, after every N server deployments, whatever N might be. The remote servers can never be considered fully secure due to us not knowing what might happen to them when we are not looking. Our current solution is a bit naive and simply restricts inbound rsync only over ssh to known mac address directories and a known public key. There are plenty of holes to pick in this, I know. Let's say I write or use a script like s3cmd/s3sync to potentially push up the files. Would I need to manage hundreds of access keys and have each server customized to include this (do-able, but key management becomes nightmarish?) Could I restrict inbound connections somehow (eg by mac address), or just allow write-only to any client that was running the script? ( i could deal with a flood of data if someone got into a system? ) having a bucket per remote machine does not seem feasible due to bucket limits? I don't think I want to use a single common key as if one machine is breached then potentially, a malicious hack could get access to the filestore key and start deleting for ll clients, correct? I hope my inexperience has not blinded me to some other solution that might be suggested! I've read lots of examples of people using S3 for backup, but can't really find anything about this sort of data collection, unless my google terminology is wrong... I've written more than I should here, perhaps it can be summarised thus: In a perfect world I just want to have one of our techs install a new remote server into a location and it automagically starts sending files home with little or no intervention, and minimises risk? Pipedream or feasible? TIA, Aitch

Search Results

Search found 16731 results on 670 pages for 'memory limit'.

Page 573/670 | < Previous Page | 569 570 571 572 573 574 575 576 577 578 579 580 | Next Page >

- by reverendj1

- by geoffreydv

- by milovan

- by user61766

- by WebSolProv

- by michael

- by Justin

- by Jon

- by EtherealMonkey

- by awashburn

- by Miky Mike

- by Blake Loizides

- by atomsfat

- by user2900126

- by MOKANA

- by user3675013

- by Recc

- by Kev

- by Richard Whitman

- by mlaverd

- by racitup

- by Tobias

- by E3pO

- by SysAdmin

- by Aitch

< Previous Page | 569 570 571 572 573 574 575 576 577 578 579 580 | Next Page >