Search Results

Search found 15415 results on 617 pages for 'unity framework'.

Page 573/617 | < Previous Page | 569 570 571 572 573 574 575 576 577 578 579 580  | Next Page >

• How Best to Replace Ugly Queries and Dynamic PL/SQL with C#?

  - by Mike

  Hi, I write a lot of one-off Oracle SQL queries (in Toad), and sometimes they can get complex, involving lots of unions, joins, and subqueries, and sometimes requiring dynamic SQL. That is, sometimes SQL queries require set based processing along with significant procedural processing. This is what PL/SQL is custom made for, but as a language it does not begin to compare to C#. Now and then I convert a PL/SQL procedure to C#, and am always amazed at how much cleaner and easier to both read and write the C# version is. The C# program might for example construct a SQL query string piece by piece and/or run several queries and process them as needed. The C# version is usually much faster as well, which must mean that I'm not very good at PL/SQL either. I do not currently have access to LINQ. My question is, how best to package all these little C# programs, which are really just mini reports, that is, replacements for ugly SQL queries? Right now I'm actually using NUnit to hold them, and calling each report a [Test], even though they aren't really tests. NUnit just happens to provide a convenient packaging framework.

  Read the article

• Releasing Autopool crashes on iOS 4.0 (and only on 4.0)

  - by samsam

  Hi there. I'm wondering what could cause this. I have several methods in my code that i call using performSelectorInBackground. Within each of these methods i have an Autoreleasepool that is being alloced/initialized at the beginning and released at the end of the method. this perfectly works on iOS 3.1.3 / 3.2 / 4.2 / 4.2.1 but it fataly crashes on iOS 4.0 with a EXC_BAD_ACCESS Exception that happens after calling [myPool release]. After I noticed this strange behaviour I was thinking about rewriting portions of my code and to make my app "less parallel" in case that the client os is 4.0. After I did that, the next point where the app crashed was within the ReachabilityCallback-Method from Apples Reachability "Framework". well, now I'm not quite sure what to do. The things i do within my threaded methods is pretty simple xml parsing (no cocoa calls or stuff that would affect the UI). After each method finishes it posts a notification which the coordinating-thread listens to and once all the parallelized methods have finished, the coordinating thread calls viewcontrollers etc... I have absolutely no clue what could cause this weird behaviour. Especially because Apples Code fails as well. any help is greatly appreciated! thanks, sam

  Read the article

• Is it possible that two requests at the same time double this code? (prevent double database entry)

  - by loostro

  1) The controller code (Symfony2 framework): $em = $this->getDoctrine()->getEntityManager(); // get latest toplist $last = $em->getRepository('RadioToplistBundle:Toplist')->findOneBy( array('number' => 'DESC') ); // get current year and week of the year $week = date('W'); $year = date('Y'); // if: // [case 1]: $last is null, meaning there are no toplists in the database // [case 2]: $last->getYear() or $last->getWeek() do not match current // year and week number, meaning that there are toplists in the // database, but not for current week // then: // create new toplist entity (for current week of current year) // else: // do nothing (return) if($last && $last->getYear() == $year && $last->getWeek() == $week) return; else { $new = new Toplist(); $new->setYear($year); $new->setWeek($week); $em->persist($new); $em->flush(); } This code is executed with each request to view toplist results (frontend) or list of toplists (backend). Anytime someone wants to access the toplist we first check if we should create a new toplist entity (for new week). 2) The question is: Is it possible that: User A goes to mydomain.com/toplist at 00:00:01 on Monday - the code should generate new entity the server slows down and it takes him 3 seconds to execute the code so new toplist entity is saved to database at 00:00:04 on Monday User B goes to mydomain.com/toplist at 00:00:02 on Monday at 00:00:02 there the toplist is not yet saved in database, thus UserB's request triggers the code to create another toplist entity And so.. after a few seconds we have 2 toplist entities for current week. Is this possible? How should I prevent this?

  Read the article

• could not execute a stored procedure(using DAAB) from a client(aspx page) to a wcf service

  - by user1144695

  i am trying to store data to sql database from a asp.net client website through a stored procedure(using DAAB) in a wcf service hosted in a asp.net empty website.When i try to store data to the DB i get the following error: ** - The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs. ** When i try to debug i get the following exception: Activation error occured while trying to get instance of type Database, key "" in the code-- Database db = EnterpriseLibraryContainer.Current.GetInstance<Database>("MyInstance"); where my app.config is <?xml version="1.0"?> <configuration> <configSections> <section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="true"/> </configSections> <dataConfiguration defaultDatabase="MyInstance"/> <connectionStrings> <add name="MyInstance" connectionString="Data Source=BLRKDAS307581\KD;Integrated Security=True;User ID=SAPIENT\kdas3;Password=ilove0LINUX" providerName="System.Data.SqlClient" /> </connectionStrings> <startup> <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/> </startup> </configuration> Can anyone help me with it? Thanks in advance...

  Read the article

• Obfuscator for .NET assembly (Maybe just a C++ obfuscator?)

  - by Pirate for Profit

  The software company I work for is using a ton of open source LGPL/BSD/MIT C++ code that we have written wrappers around to port "helper classes" into a .NET assembly, via C++/CLI. These libraries have wrapped old cryptic APIs into easy-to-use ones based on common sense, and will be very helpful for a lot of different tasks will be included in many future client's applications, and we might even license it to other software companies in the same field. So naturally we are tasked with looking into solutions for securing the code from prying eyes. What we're trying to do is stop the casual observer from seeing what's going on. Now I have hacked some crazy shit in EverQuest and other video games in my day so I know with enough tireless effort anything can be done. But we don't want to make it easy for whomever. To the point, besides the Visual Studio compiler's optimizations, is there's a C++ obfuscator or .NET assembly obfuscator (after it's been built o.O) or something that would scramble everything up, re-arrange data structures, string constants, etc. idk? And if such a thing exists, we'd be curious to know how that would impact performance, as some sections of code are time critical (funny saying that using a managed M$ framework).

  Read the article

• Building a survey to put in a WordPress website using Python/Django

  - by chiurox

  So I've been given a task to build a survey to get data regarding time slot preferences of prospective students for a particular course. I know there are really quick solutions to this like Google Forms, SurveyMonkey, but since it's not unusually hard, I want to implement the survey myself in a totally new language as an opportunity to get started with it and also be able to customize and provide dynamic info to the users who are voting. Although I have done some stuff in PHP, C++, javascript, etc, I'm pretty new to Python+Django framework but it's something I've been meaning to get into since a long time ago. Initially, what I want is to make a grid with the days of the week as columns and time-durations as rows. In each cell I want to provide users a way to choose how strong (high/medium/low) their preference for this particular day+time is. I also want to show how many "votes" have already been cast for this particular preference because this will influence a lot in their decisions and as a result make this process easier when we are going to define the classes. I'll probably store the data in MySQL. Could anyone point me to some really good Python+Django tutorials for my particular purpose? Does anyone think I'm wasting my time with this trivial task by choosing new tools and that I should just use something I already know (like PHP) or a free service or plugin for Wordpress? Thanks!

  Read the article

• Obtaining command line arguments in a QT application

  - by morpheous

  The following snippet is from a little app I wrote using the QT framework. The idea is that the app can be run in batch mode (i.e. called by a script) or can be run interactively. It is important therefore, that I am able to parse command line arguments in order to know which mode in which to run etc. [Edit] I am debugging using QTCreator 1.3.1 on Ubuntu Karmic. The arguments are passed in the normal way (i.e. by adding them via the 'Project' settings in the QTCreator IDE). When I run the app, it appears that the arguments are not being passed to the application. The code below, is a snippet of my main() function. int main(int argc, char *argv[]) { //Q_INIT_RESOURCE(application); try { QApplication the_app(argc, argv); //trying to get the arguments into a list QStringList cmdline_args = QCoreApplication::arguments(); // Code continues ... } catch (const MyCustomException &e) { return 1; } return 0; } [Update] I have identified the problem - for some reason, although argc is correct, the elements of argv are empty strings. I put this little code snippet to print out the argv items - and was horrified to see that they were all empty. for (int i=0; i< argc; i++){ std::string s(argv[i]); //required so I can see the damn variable in the debugger std::cout << s << std::endl; } Does anyone know what on earth is going on (or a hammer)?

  Read the article

• Organising files and classes in XCode (iPhone application)

  - by pulegium

  It's a generic question and really a newbie one too, so bear with me... I'm playing with some iPhone development, and trying to create a simple "flip type" application. Nothing sophisticated, let's say on the flip side is a short application summary, bit like 'help' and on the main screen is a simple board game, let's say tic-tac-toe or similar. Now, XCode has generated me 'Main View', 'Flipside View' and 'Application Delegate' folders, with default template files in them. Now the question is where do I create appropriate 'MVC' classes? Let's say (V)iew classes are going to be the ones that have been automatically created. So the Flipside view class is responsible for generating text/images etc on the 'help' view. 'Main View' class is what draws the items on the table and updates the counters, etc. Where should I place the 'controller' class? And also, should it only be dealing with proxying only to the model? According to this the controller method is called from the view and manipulates the method classes. Similarly, the results from model are passed back to the view class by the controller issuing the calls to appropriate view methods. Similarly, where does the model class go? or should I just create a new folder for each, controller and model class files? What I'm after is the best practices, or just a short description how people normally structure their applications. I know it's very specific and also undefined... I came from Django background, so the way stuff is organised there is slightly different. Hope this makes sense, sorry if it's all bit vague, but I have to start somewhere :) And yes I've read quite few docs on the apple developer site, but trouble is that the documents are either going into too much detail about the language/framework/etc and the examples are way too simplistic. Actually, this leads me to the final question, has anyone know any good example of relatively complete application tutorial which I could use as a reference in organising my files?...

  Read the article

• SQL Compact performance on device

  - by Ben M

  My SQL Compact database is very simple, with just three tables and a single index on one of the tables (the table with 200k rows; the other two have less than a hundred each). The first time the .sdf file is used by my Compact Framework application on the target Windows Mobile device, the system hangs for well over a minute while "something" is done to the database: when deployed, the DB is 17 megabytes, and after this first usage, it balloons to 24 megs. All subsequent usage is pretty fast, so I'm assuming there's some sort of initialization / index building going on during this first usage. I'd rather not subject the user to this delay, so I'm wondering what this initialization process is and whether it can be performed before deployment. For now, I've copied the "initialized" database back to my desktop for use in the setup project, but I'd really like to have a better answer / solution. I've tried "full compact / repair" in the VS Database Properties dialog, but this made no difference. Any ideas? For the record, I should add that the database is only read from by the device application -- no modifications are made by that code.

  Read the article

• best web database solution for scala for a high traffic site?

  - by egervari

  I am in charge of a rebuilding a website that gets about 250,000 visitors a day. We'd like to use Scala, but it does not work very well with Spring (in some minor cases) and Hibernate (there is a major and very annoying mismatch here if you want to use scala collections, which we do). The application itself is going to have about 40-50 tables. Other than Hibernate, is there an ORM that works awesome with Scala and is as performant and reliable as Hibernate? Does it also have the same capabilities, or are we going to run into leaky-abstractions if we don't use Hibernate? It would be a big risk for us to go with a framework that is newer and doesn't seem to have a lot of industry backing... and at the same time, Hibernate is a real pain to program against when using Scala. 1) The Java Collection <- Scala Collection is absolutely painful. There is a lot more boilerplate and crap to write. 2) The IDE doesn't import JavaConversions and java interfaces automatically... so we this needs to be done manually. Optimizing Imports in IDEA is going to destroy all the manual work. 3) There is also a performance cost to converting back and forth all the time in your domain objects and your dao classes. 4) Not to mention there needs to be a lot of casting, which produces code ugly as sin. I actually would love to write my own orm that is 100% tailored to scala, but obviously this is really outside of the scope of our project for now. So what is the best approach?

  Read the article

• Converting to MVC3 - some views still want 'System.Web.Mvc, Version=1.0.0.0,

  - by justSteve

  I've used the directions from the release notes and have been able to navigate most pages - my unit tests are not comprehensive but most all pass. However...when I attempt to edit an existing or create a new user I'm getting the error pasted below - notice that it's references version=1... - this project started life as a v1 and was converted to mvc2 at the RTM. I'm still working with V2 projects but no longer any v1. Am i due for a GAC cleansing? Server Error in '/' Application. Could not load file or assembly 'System.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified. === Pre-bind state information === LOG: User = STUDIO11\mUser LOG: DisplayName = System.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 (Fully-specified) LOG: Appbase = file:///C:/Users/C:\Users\[path to project]/ LOG: Initial PrivatePath = C:\Users\[path to project]\bin Calling assembly : App_Web_qcjylaoc, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null. === LOG: This bind starts in default load context. LOG: Using application configuration file: C:\Users\[path to project]\web.config LOG: Using host configuration file: LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config. LOG: Post-policy reference: System.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 LOG: The same bind was seen before, and was failed with hr = 0x80070002.

  Read the article

• Computation overhead in C# - Using getters/setters vs. modifying arrays directly and casting speeds

  - by Jeffrey Kern

  I was going to write a long-winded post, but I'll boil it down here: I'm trying to emulate the graphical old-school style of the NES via XNA. However, my FPS is SLOW, trying to modify 65K pixels per frame. If I just loop through all 65K pixels and set them to some arbitrary color, I get 64FPS. The code I made to look-up what colors should be placed where, I get 1FPS. I think it is because of my object-orented code. Right now, I have things divided into about six classes, with getters/setters. I'm guessing that I'm at least calling 360K getters per frame, which I think is a lot of overhead. Each class contains either/and-or 1D or 2D arrays containing custom enumerations, int, Color, or Vector2D, bytes. What if I combined all of the classes into just one, and accessed the contents of each array directly? The code would look a mess, and ditch the concepts of object-oriented coding, but the speed might be much faster. I'm also not concerned about access violations, as any attempts to get/set the data in the arrays will done in blocks. E.g., all writing to arrays will take place before any data is accessed from them. As for casting, I stated that I'm using custom enumerations, int, Color, and Vector2D, bytes. Which data types are fastest to use and access in the .net Framework, XNA, XBox, C#? I think that constant casting might be a cause of slowdown here. Also, instead of using math to figure out which indexes data should be placed in, I've used precomputed lookup tables so I don't have to use constant multiplication, addition, subtraction, division per frame. :)

  Read the article

• Extracting DCT coefficients from encoded images and video

  - by misha

  Is there a way to easily extract the DCT coefficients (and quantization parameters) from encoded images and video? Any decoder software must be using them to decode block-DCT encoded images and video. So I'm pretty sure the decoder knows what they are. Is there a way to expose them to whomever is using the decoder? I'm implementing some video quality assessment algorithms that work directly in the DCT domain. Currently, the majority of my code uses OpenCV, so it would be great if anyone knows of a solution using that framework. I don't mind using other libraries (perhaps libjpeg, but that seems to be for still images only), but my primary concern is to do as little format-specific work as possible (I don't want to reinvent the wheel and write my own decoders). I want to be able to open any video/image (H.264, MPEG, JPEG, etc) that OpenCV can open, and if it's block DCT-encoded, to get the DCT coefficients. In the worst case, I know that I can write up my own block DCT code, run the decompressed frames/images through it and then I'd be back in the DCT domain. That's hardly an elegant solution, and I hope I can do better. Presently, I use the fairly common OpenCV boilerplate to open images: IplImage *image = cvLoadImage(filename); // Run quality assessment metric The code I'm using for video is equally trivial: CvCapture *capture = cvCaptureFromAVI(filename); while (cvGrabFrame(capture)) { IplImage *frame = cvRetrieveFrame(capture); // Run quality assessment metric on frame } cvReleaseCapture(&capture); In both cases, I get a 3-channel IplImage in BGR format. Is there any way I can get the DCT coefficients as well?

  Read the article

• Images not shown when publishing MVC application to virtual directory inside default web-site

  - by Michael Sagalovich

  Hi! I am developing an application using ASP.NET MVC 1 and VS2008. When I deploy it to the default web-site in my IIS6 on WinXP, all images are shown correctly, path to any given image is localhost/Content/ImagesUI/[image].[ext] When I deploy it to the virtual directory, created inside the same site, any image request returns IIS standard 404 error page, while the path is localhost/[DirectoryName]/Content/ImagesUI/[image].[ext] - that seems to be correct, true? I am mapping .* to c:\windows\microsoft.net\framework\v2.0.50727\aspnet_isapi.dll in both site and directory configurations. When this mapping is removed, images are shown correctly. However, all other URLs do not work, of course. When I am trying to open an image in browser using the URL to it, aspnet_wp.exe process is not even started (I restarted IIS to test it) - I merely get 404 or the image, depending on the presence of * mapping. Thus, I suppose it has nothing to do neither with routes registered for MVC, nor with ASP. The solution that I found is to make Content folder a virtual directory and remove * mapping from its configuration. While that's OK to some extent, I want a better solution, which will explain and eliminate the cause of the problem, not just workaround it. Thanks for your help!

  Read the article

• TFS2010 API - Which server event fires when checkin notes are changed?

  - by user3708981

  I've written a TFS plugin that impliments the ISubscribe interface, and creates an external ticket base off of the contents of a check-in note. What I would like to do, if when I go back through older TFS check-ins in VS and edit a check-in note, the plugin would process that event and create an external ticket retroactively. What event / SubscribedType do I need to subscribe to in order for ProcessEvents to fire? My stubbed out code - using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.Common; using Microsoft.TeamFoundation.VersionControl.Client; // From C:\Program Files\Microsoft Team Foundation Server 2010\Tools\ using Microsoft.TeamFoundation.Framework.Server; using Microsoft.TeamFoundation.VersionControl.Server; using Changeset = Microsoft.TeamFoundation.VersionControl.Server.Changeset; public class EmbeddedWorkItemEventHandler : ISubscriber { const string EVENT_NAME = "TicketEvent"; const string APP_LOG = "Application"; public Type[] SubscribedTypes() { return new Type[1] { typeof(CheckinNotification) }; // What else do I need here? } public string Name { get { return EVENT_NAME; } } public SubscriberPriority Priority { get { return SubscriberPriority.Normal; } } public EventNotificationStatus ProcessEvent(TeamFoundationRequestContext requestContext, NotificationType notificationType, object notificationEventArgs, out int statusCode, out string statusMessage, out ExceptionPropertyCollection properties) { // Create the event source, if it doesn't exist if (!System.Diagnostics.EventLog.SourceExists(EVENT_NAME)) { System.Diagnostics.EventLog.CreateEventSource(EVENT_NAME, APP_LOG); } statusCode = 0; properties = null; statusMessage = String.Empty; string ErrorLine = ""; try { // Here we'll validate the Ticket name if (notificationType == NotificationType.DecisionPoint && notificationEventArgs is CheckinNotification) { //Check-in blocking logic here. } else if (notificationType == NotificationType.Notification && notificationEventArgs is CheckinNotification) { // Tickets on check-in here. } } Catch { // Error checking } return EventNotificationStatus.ActionPermitted; }

  Read the article

• Translate Prototype code into Jquery version

  - by user1055495

  I everybody, I'm working on a SaaS application and I need to use Jquery instead of Prototype due to some extra plugins integration. My code that was wotking a charm with Prototype is not running anymore with Jquery and I'm not used to write in this framework... Is there someone to help me in "translating" this one: Thanks a lot for your help. var rates = new Array(); <% for tva_rate in @tva_rates -%> rates.push(new Array(<%= tva_rate.id %>, '<%=h tva_rate.taux %>', '<%=h tva_rate.compte_id %>' )); <% end -%> function tvaSelected() { tva_id = $('journal_tva_id').getValue(); show = 1; if (tva_id > 0){ rates.each(function(rate) { if (rate[0] == tva_id) { $('journal_taux').setValue(rate[1]); $('journal_compte_tva').setValue(rate[2]); show = 2; } }); } if (show == 1) { $('tva_taux_field').hide(); } else { $('tva_taux_field').show(); } } document.observe('dom:loaded', function() { tvaSelected(); $('journal_tva_id').observe('change', tvaSelected); });

  Read the article

• Hibernate HQL m:n join problem

  - by smallufo

  I am very unfamiliar with SQL/HQL , and am currently stuck with this 'maybe' simple problem : I have two many-to-many Entities , with a relation table : Car , CarProblem , and Problem . One Car may have many Problems , One Problem may appear in many Cars, CarProblem is the association table with other properties . Now , I want to find Car(s) with specified Problem , how do I write such HQL ? All ids are Long type . I've tried a lot of join / inner-join combinations , but all in vain.. -- updated : Sorry , forget to mention : Car has many CarProblem Problem has many CarProblem Car and Problem are not directly connected in Java Object. -- update , java code below -- @Entity public class Car extends Model{ @OneToMany(mappedBy="car" , cascade=CascadeType.ALL) public Set<CarProblem> carProblems; } @Entity public class CarProblem extends Model{ @ManyToOne public Car car; @ManyToOne public Problem problem; ... other properties } @Entity public class Problem extends Model { other properties ... // not link to CarProblem , It seems not related to this problem // **This is a very stupid query , I want to get rid of it ...** public List<Car> findCars() { List<CarProblem> list = CarProblem.find("from CarProblem as cp where cp.problem.id = ? ", id).fetch(); Set<Car> result = new HashSet<Car>(); for(CarProblem cp : list) result.add(cp.car); return new ArrayList<Car>(result); } } The Model is from Play! framework , so these properties are all public .

  Read the article

• Flex 4 app, coldfusion help

  - by ihaveitnow

  I have some* experience using the flex framework for building web apps. But I have no experience with server side languages, I have heard the saying "choose one and stick to it" several times in reference to programming. I have chosen coldfusion. Now I have no clue what to do or where to start. Now to the details: It will be a site for food showcases. Food menus sorted by cultural origin, vegetarian or meat kind, etc. Things like that. I intend to build a web site that enables subscriptions, and keeps them updated whenever updates are made. And a commenting system to encourage user feedback. And I would like the site to have a database of food items (as mentioned earlier); from my research coldfusion will enable me to do this. I would like resources that I could go to, and do more research myself. And all recommendations that can be provided. Whether you think I dont need coldfusion, and if I can get this done with just flex and as3. I appreciate all feedback, thanks for taking the time to read and respond. * = not much experience, still a "beginner"

  Read the article

• How to manage feeds with subclassed object in Django 1.2?

  - by Matteo

  Hi, I'm trying to generate a feed rss from a model like this one, selecting all the Entry objects: from django.db import models from django.contrib.sites.models import Site from django.contrib.auth.models import User from imagekit.models import ImageModel import datetime class Entry(ImageModel): date_pub = models.DateTimeField(default=datetime.datetime.now) author = models.ForeignKey(User) via = models.URLField(blank=True) comments_allowed = models.BooleanField(default=True) icon = models.ImageField(upload_to='icon/',blank=True) class IKOptions: spec_module = 'journal.icon_specs' cache_dir = 'icon/resized' image_field = 'icon' class Post(Entry): title = models.CharField(max_length=200) description = models.TextField() slug = models.SlugField(unique=True) def __unicode__(self): return self.title class Photo(Entry): alt = models.CharField(max_length=200) description = models.TextField(blank=True) original = models.ImageField(upload_to='photo/') class IKOptions: spec_module = 'journal.photo_specs' cache_dir = 'photo/resized' image_field = 'original' def __unicode__(self): return self.alt class Quote(Entry): blockquote = models.TextField() cite = models.TextField(blank=True) def __unicode__(self): return self.blockquote When I use the render_to_response in my views I simply call: def get_journal_entries(request): entries = Entry.objects.all().order_by('-date_pub') return render_to_response('journal/entries.html', {'entries':entries}) And then I use a conditional template to render the right snippets of html: {% extends "base.html" %} {% block main %} <hr> {% for entry in entries %} {% if entry.post %}[...]{% endif %}[...] But I cannot do the same with the Feed Framework in django 1.2... Any suggestion, please?

  Read the article

• I just discovered why all ASP.Net websites are slow, and I am trying to work out what to do about it

  - by James

  I just discovered that every request in an ASP.Net web application gets a Session lock at the begging of a request, and then releases it at the end of the request!!! I mean, WTF Microsoft! In case the implication is lost on you, as it was from me at first, this basically means the following: Anytime an ASP.Net webpage is taking a long time to load (maybe due to a slow database call or whatever), and the user decides they want to navigate to a different page because they are tired of waiting, THEY CANT! The ASP.Net session lock forces the new page request to wait until the original request has finished its painfully slow load. Arrrgh. Anytime an UpdatePanel is loading slowly, and the user decides to navigate to a different page before the UpdadePanel has finished updating... THEY CANT! The ASP.Net session lock forces the new page request to wait until the original request has finished its painfully slow load. Double Arrrgh! So what are the options? So far I have come up with: Implement a Custom SessionStateDataStore, which ASP.Net supports. I haven't found too many out there to copy, and it seems kind of high risk and easy to mess up. Keep track of all requests in progress, and if a request comes in from the same user, cancel the original request. Seems kind of extreme, but it would work (I think) Don't user Session! When I need some kind of state for the user, I could just user Cache instead, and key items on the authenticated user's name, or some such thing. Again seems kind of extreme I really can't believe that the ASP.Net Microsoft team would have left such a huge performance bottleneck in the framework at version 4.0! Am I missing something obvious? How hard would it be to use a ThreadSafe collection for the Session? Arrrrghhhhhh. Any advice much appreciated.

  Read the article

• Outlook VSTO AddIn for Meetings

  - by BigDubb

  We have created a VSTO addin for Outlook Meetings. As part of this we trap on the SendEvent of the message on the FormRegionShowing event: _apptEvents.Send += new Microsoft.Office.Interop.Outlook.ItemEvents_SendEventHandler(_apptEvents_Send); The method _apptEvents_Send then tests on a couple of properties and exits where appropriate. private void _apptEvents_Send(ref bool Cancel) { if (!_Qualified) { MessageBox.Show("Meeting has not been qualified", "Not Qualified Meeting", MessageBoxButtons.OK, MessageBoxIcon.Information); chkQualified.Focus(); Cancel = true; } } The problem that we're having is that some users' messages get sent twice. Once when the meeting is sent and a second time when the user re-opens outlook. I've looked for memory leaks, thinking that something might not be getting disposed of properly, and have added explicit object disposal on all finally calls to try and make sure resources are managed, but still getting the functionality incosistently across the organization. i.e. I never encountered the problem during development, nor other developers during testing. All users are up to date on framework (3.5 SP1) and Hotfixes for Outlook. Does anyone have any ideas on what might be causing this? Any ideas anyone might have would be greatly appreciated.

  Read the article

• Work with AJAX response with DOM methods

  - by Stomped

  I'm retrieving an entire HTML document via AJAX - and that works fine. But I need to extract certain parts of that document and do things with them. Using a framework (jquery, mootools, etc) is not an option. The only solution I can think of is to grab the body of the HTML document with a regex (yes, I know, terrible) ie. <body>(.*)</body> put that into the current page's DOM in a hidden element, and work with it from there. Is there an easier/better way? Update I've done some testing, and inserting an entire HTML document into a created element behaves a bit differently across browsers I've tested. For example: FF3.5: keeps the contents of the HEAD and BODY tags IE7 / Safari4: Only includes what's between ... Opera 10.10: Keeps HEAD and everything inside it, Keeps contents of BODY The behavior of IE7 and Safari are ideal, but different browsers are doing this differently. Since I'm loading a predetermined HTML document I think I'm going to use the regEx to grab what I want and insert it into a DOM element - unless someone has other suggestions.

  Read the article

• What would be a better implementation of shared variable among subclass

  - by Churk

  So currently I have a spring unit testing application. And it requires me to get a session cookie from a foreign authentication source. Problem what that is, this authentication process is fairly expensive and time consuming, and I am trying to create a structure where I am authenticate once, by any subclass, and any subsequent subclass is created, it will reuse this session cookie without hitting the authentication process again. My problem right now is, the static cookie is null each time another subclass is created. And I been reading that using static as a global variable is a bad idea, but I couldn't think of another way to do this because of Spring framework setting things during run time and how I would set the cookie so that all other classes can use it. Another piece of information. The variable is being use, but is change able during run time. It is not a single user being signed in and used across the board. But more like a Sub1 would call login, and we have a cookie. Then multiple test will be using that login until SubX will come in and say, I am using different credential, so I need to login as something else. And repeats. Here is a outline of my code: public class Parent implements InitializingBean { protected static String BASE_URL; public static Cookie cookie; ... All default InitializingBean methods ... afterPropertiesSet() { cookie = // login process returns a cookie } } public class Sub1 extends Parent { @resource public String baseURL; @PostConstruct public void init() { // set parents with my baseURL; BASE_URL = baseURL; } public void doSomething() { // Do something with cookie, because it should have been set by parent class } } public class Sub2 extends Parent { @resource public String baseURL; @PostConstruct public void init() { // set parents with my baseURL; BASE_URL = baseURL; } public void doSomethingElse() { // Do something with cookie, because it should have been set by parent class } }

  Read the article

• Execute JavaScript from within a C# assembly

  - by ScottKoon

  I'd like to execute JavaScript code from within a C# assembly and have the results of the JavaScript code returned to the calling C# code. It's easier to define things that I'm not trying to do: I'm not trying to call a JavaScript function on a web page from my code behind. I'm not trying to load a WebBrowser control. I don't want to have the JavaScript perform an AJAX call to a server. What I want to do is write unit tests in JavaScript and have then unit tests output JSON, even plain text would be fine. Then I want to have a generic C# class/executible that can load the file containing the JS, run the JS unit tests, scrap/load the results, and return a pass/fail with details during a post-build task. I think it's possible using the old ActiveX ScriptControl, but it seems like there ought to be a .NET way to do this without using SilverLight, the DLR, or anything else that hasn't shipped yet. Anyone have any ideas? update: From Brad Abrams blog namespace Microsoft.JScript.Vsa { [Obsolete("There is no replacement for this feature. Please see the ICodeCompiler documentation for additional help. http://go.microsoft.com/fwlink/?linkid=14202")] Clarification: We have unit tests for our JavaScript functions that are written in JavaScript using the JSUnit framework. Right now during our build process, we have to manually load a web page and click a button to ensure that all of the JavaScript unit tests pass. I'd like to be able to execute the tests during the post-build process when our automated C# unit tests are run and report the success/failure alongside of out C# unit tests and use them as an indicator as to whether or not the build is broken.

  Read the article

• Reference remotely located assembly (web uri) from locally installed application?

  - by moonground.de

  Hi Stackoverflowers! :) We have a .NET application for Windows which is installed locally by Microsoft Installer. Now we have the need to use additional assemblies which are located online at our Web Servers. We'd like to refer to a remote uri like https://www.ourserver.com/OurProductName/ExternalLib.dll and reveal additional functionality, which is described roughly by a known common ("AddIn/Plugin") Interface. These are not 3rd Party Plugins, we just want be able to exchange parts of the application frequently, without the need to have frequent software updates. Our first idea was to add some kind of "remote refence" in Visual Studio by setting the path to the remote assembly uri. But Visual Studio downloaded the assembly immediately to a temporary directory, adding a reference to it. Our second attempt then, is simply using a WebRequest (or WebClient) to retrieve a binary stream of the Assembly, loading it "from image" by using Assembly.Load(...). This actually works, but is not very elegant and requires more additional programming for verification etc. We hoped Clickonce would provide useful techniques but apparently it's suitable for standalone applications only. (Correct me?) Is there a way (.net native or by framework/api) to reference remotely located assemblies? Thanks in advance and have a happy easter!

  Read the article

< Previous Page | 569 570 571 572 573 574 575 576 577 578 579 580  | Next Page >