Search Results

Search found 16947 results on 678 pages for 'game play'.

Page 574/678 | < Previous Page | 570 571 572 573 574 575 576 577 578 579 580 581  | Next Page >

• How do I configure sound with PulseAudio and Multiseat?

  - by Anthony

  In the spirit of full disclosure, i just posted this question to the ubuntu forums, but i figure more heads working on it couldn't hurt. I have a multi-seat setup working quite well. Hot plugging input devices works as expected and such. The only issue I am still not able to resolve is getting the audio for each seat. Here is a summary of my attempts at getting audio to work: Make ~/.pulse/default.pa dynamically configured based on which $DISPLAY the user logs in at. See this pastebin for the details. Load pulseaudio as a system-wide instance. Couldn't get this to work. None of the audio hardware was accessible to the users. Use udev rules to mark seats in ConsoleKit. Following udev guidelines found here: http://www.freedesktop.org/wiki/Software/systemd/multiseat I didn't think this would work, although it was "guaranteed" to work by someone in irc.freenode #pulseaudio None of those attempts yielded success, which is why I now turn to the community for help. It is quite possible that the suggested methods work and I just messed some aspect of it up, idk. This is the last piece of the puzzle which is needed before I can go and update the MultiseatX page to include instructions for Ubuntu 12.04. My understandings on the situation: Access to pulseaudio is restricted to the active session as marked by ConsoleKit (something about an ACL). CK can only mark one session as active at a time. This simple little fact of life leads me to believe that the solution should involve pulseaudio being run as a system-wide instance. Each user should connect to the pulse server and be limited to a subset of all the hardware. Maybe each user connects to the pulse server via localhost, idk. I do know that regardless of my attempts and their failed results, I was always able to use sudo aplay -D plughw:0,0 /usr/share/sounds/alsa/Front_Center.wav to play something to any of the hardware. I'm grasping at straws and am now down to the last few hairs i can pull out of my head. Please, help me figure this out so we can share the wealth. Any additional information needed will be provided at your request.

  Read the article

• Radeon HD 2000, 3000, 4000 on 12.10 Quantal: fglrx (legacy) 12.6 unsupported, what to do?

  - by Andrew Mao

  After upgrading to 12.10 quantal, the packaged version of fglrx no longer works. I discovered that this is because there is a separate 'legacy' fglrx driver for the HD 2k-4k series cards, but it is incompatible with the xorg server on 12.10. This is the most current version of the driver for HD 2000 through HD 4000 series cards. You can't use the non-legacy fglrx driver, but you can use the open-source radeon driver if you prefer your WM compositing to be laggy and your YouTube videos to play like they would on a Pentium MMX series: http://support.amd.com/us/kbarticles/Pages/catalyst126legacyproducts.aspx Usually this driver can be installed in the following way, necessary because apt-get install fglrx would pull in the non-legacy driver: wget http://www2.ati.com/drivers/legacy/amd-driver-installer-12.6-legacy-x86.x86_64.zip unzip amd-driver-installer-* sudo sh ./amd-driver-installer-*.run --buildpkg Ubuntu/quantal sudo dpkg -i fglrx*.deb sudo aticonfig --initial -f If you use a different version of fglrx (for example, a newer 12.9 that doesn't support those cards) then the final command will give you an error no supported hardware detected or something similar. However, everything works at this point and you will get a reasonable xorg.conf: ... other stuff Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:5:0" EndSection ... other stuff At this point you're supposed to reboot and everything will be working with the fglrx driver. However, upon rebooting, you'll be treated to the following errors in Xorg.0.log when fglrx attempts to load: (EE) Failed to load /usr/lib/xorg/modules/drivers/fglrx_drv.so: /usr/lib/xorg/modules/drivers/fglrx_drv.so: undefined symbol: noXFree86DRIExtension Some searching around will show that this is a problem with the legacy ATI drivers not supporting xserver 1.13 or newer. (Arch Linux thread) ATI has released a fixed driver for its most recent (HD 5000 series or later) cards, but not for the 'legacy' cards yet. The non-legacy ATI drivers can't be used with the old cards. What should an Ubuntu user, using one of these HD 2000-4000 series cards, do? Wait for an updated 'legacy' ATI driver that properly works with xserver 1.13? Downgrade back to 12.04 Precise, which uses xserver 1.11? Try to downgrade xserver on 12.10 Quantal to 1.12, which could possibly break Unity and GNOME? Forced upgrade to HD 5000 series or later card? (Not possible with integrated graphics...) Some other 1337 action that fixes this problem painlessly?

  Read the article

• Ubuntu 10.10 forgets desktop theme.

  - by Marcelo Cantos

  (I posed this question on superuser.com and haven't received any answers or comments, then I came across this site, so my apologies to anyone who has seen this already.) I am running Ubuntu in VirtualBox (on a Windows 7 host). Several times now, the top-level menu bar, the task bar — and seemingly every system dialog — have forgotten the out-of-the-box "Ambiance" theme they conform to when I first installed the system. Window captions still preserve the theme, but pretty much nothing else does. I have searched high and low on Google for assistance with this problem. Everything I've found suggests either running some gconf reset or deleting .gconf* .gnome* and other similar directories. I have followed all this advice and nothing works. I still get a boring Windows-95-style gray 3D look and feel. On previous occasions, after much messing around I've given up and rebooted the VM instance, and been pleasantly suprised to see the original "Ambience" theme restored throughout the UI, but invariably it disappears again some time later, usually after a reboot, so I can never figure out what I did that broke it. Here's a sample from Ubuntu's site of what I want it to look like. And here's a screenshot of my system as it currently looks. Also note that my GNOME Terminals normally have a nice purple semi-translucent look, and as can be seen from the screenshot, they are now just a solid matt white. This last time (just yesterday), trying numerous combinations all the usual tricks and rebooting several times hasn't fixed it, so here I am on SU wondering: How do I recover the out-of-the-box theme for my Gnome/Ubuntu desktop, noting that blowing away all config files — as suggested in many places online — fails to achieve this? It might help to know that it seems to fail either after I resize the VM instance, forcing the Ubuntu desktop to resize itself, or after I play around with Compiz settings. I haven't been able to figure out which of these it is, and it could be neither. Given the amount of pain I have had to go through to get things back to normal (and given that I am at a loss as to how to do so), it has proven difficult to definitively isolate the cause.

  Read the article

• Create Outlook Appointments from PowerShell

  - by BuckWoody

  I've been toying around with a script to create a special set of calendar objects in Outlook that show when my SQL Server Agent Jobs are scheduled to run. I haven't finished yet, but I thought I would share the part that creates the Outlook Appointments.I have yet to fill a variable with the start and end times, and then loop through that to create the appointments. I'm thinking I'll make the script below into a function, and feed it those variables in a loop. The script below creates a whole new Calendar Folder in Outlook called "SQL Server Agent Jobs". I also use categories quite a bit, so you'll see that too. Caution: If you plan to play with this script, do it on an isolated workstation, not on your "regular" Outlook calendar. Otherwise, you'll have lots of appointments in there that you don't care about!  # Add a new calendar item to a new Outlook folder called "SQL Server Agent Jobs" $outlook = new-object -com Outlook.Application $calendar = $outlook.Session.folders.Item(1).Folders.Item("SQL Server Agent Jobs") $appt = $calendar.Items.Add(1) # == olAppointmentItem $appt.Start = [datetime]"03/11/2010 11:00" $appt.End = [datetime]"03/11/2009 12:00" $appt.Subject = "JobName" $appt.Location = "ServerName" $appt.Body = "Job Details" $appt.Categories = "SQL server Agent Job" $appt.Save()   Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately.   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Memory Glutton

  - by AreYouSerious

  I have to admit that I can't get enough storage. I have hard drives just sitting around in case I need to move somthing, or I'm going to a friends and either they want something I have or I want something they might have. What I'm going to talk about today is cost effective memory for devices. I don't know how this particualr device will work in a camera, as That's not what I use in my camera, in fact I don't have a camera that doesn't either use SD, or the old compact flash card, that's not so compact anymore. There's this thing that uses two micro sd cards to double the capacity of your memory, and it costs about 4 bucks, without the Micro SD card. I have had one for about a year and was going to throw it away because I couldn't get it to work with my computer, or with my Sony Reader. However I found out by one last ditch effort that this thing works beautifully with my Sony PSP. there is no software to speak of associated with this thing, you simply put in two SD cards of the same size... (if you put in two different sizes it will still work, you'll only double the smallest cards size though) and format through the psp. Viola you know have a 29 GB memory card for your PSP. why is this important ? well for starters you can carry more music and more videos. Second if you have gone the way of the hacker.... you can store more games on your card... There are just a few things you have to note.... I speak from experience... you have to use the usb connection to the PSP to do any file moving, as I said previously said card doesn't play well with my computers or card readers... I not saying it won't work at all, just hasn't work with anything I own. Second. If for some reason you try to Hack/crack your PSP don't attempt to delete a game from the psp, use the usb file browser to remove games. if you delete from the PSP you are likely to have to move all your files off, reformat and start again... just a couple things I have noticed... if I had done something like that.   anyway, Here's a link.... http://www.photofast-adapter.com/  and if you want to buy one, get it off ebay, I've seen them as low as $1.99

  Read the article

• LightSwitch Tutorial - Adding Image to a LightSwitch Screen

  - by ChrisD

  Last week, I have discussed how to control Screen Layouts in LightSwitch. Now, I will talk about how to add an image to the LightSwitch screen. In this demo, I will try to upload the image to the screen and will save the image into the database. The first step we need to do is start the VS 2010, create LightSwitch Desktop application with the name “AddingImageIntoScreenInLSBeta2” as shown in the following figure. The second steps, create a table as shown in the screen by selecting the "create a table" option in the start up screen. Then, we need to add a New Data Screen to our demo application. See the following figure which is the default screen layouts for the screen we have created. So we have to change the layout of this screen so that the uploading and using the image in the screen can be easily explained. Before adding the Model Window we have to prepare the layout. So delete the Highlighted fields as shown in the above figure. After preparing the layout to add the image, just add a new Group to the Person Property Rows Layout. To add a new group, [No: 1] – Select the Rows layout, it will shows you the Add button. [No: 2] – Click the Add button to select the new group. [No: 3] – Select the New Group. After adding the new group change the Layout type to Columns Layout. Here, -          Change the rows layout to columns layouts and give the display name as Uploading Image Example. -          Click on the add button to add the Photo field under the column layout. Add a new group under the Column layout group. Follow the [No: #] to create a new group under the columns layout group. After adding a new group of rows layout add the fields to the newly created group. [No: 1] – Select the Rows Layout group and change the display name as Details. [No: 2] – Click on Add button to select the appropriate fields to add to the group. [No: 3] – Add the fields to the group The above snippet shows the complete layout tree for our screen. Now the screen for uploading the image is ready. Just press the Play button. And see the result.

  Read the article

• Diving into Scala with Cay Horstmann

  - by Janice J. Heiss

  A new interview with Java Champion Cay Horstmann, now up on otn/java, titled  "Diving into Scala: A Conversation with Java Champion Cay Horstmann," explores Horstmann's ideas about Scala as reflected in his much lauded new book,  Scala for the Impatient.  None other than Martin Odersky, the inventor of Scala, called it "a joy to read" and the "best introduction to Scala". Odersky was so enthused by the book that he asked Horstmann if the first section could be made available as a free download on the Typesafe Website, something Horstmann graciously assented to. Horstmann acknowledges that some aspects of Scala are very complex, but he encourages developers to simply stay away from those parts of the language. He points to several ways Java developers can benefit from Scala: "For example," he says, " you can write classes with less boilerplate, file and XML handling is more concise, and you can replace tedious loops over collections with more elegant constructs. Typically, programmers at this level report that they write about half the number of lines of code in Scala that they would in Java, and that's nothing to sneeze at. Another entry point can be if you want to use a Scala-based framework such as Akka or Play; you can use these with Java, but the Scala API is more enjoyable. " Horstmann observes that developers can do fine with Scala without grasping the theory behind it. He argues that most of us learn best through examples and not through trying to comprehend abstract theories. He also believes that Scala is the most attractive choice for developers who want to move beyond Java and C++.  When asked about other choices, he comments: "Clojure is pretty nice, but I found its Lisp syntax a bit off-putting, and it seems very focused on software transactional memory, which isn't all that useful to me. And it's not statically typed. I wanted to like Groovy, but it really bothers me that the semantics seems under-defined and in flux. And it's not statically typed. Yes, there is Groovy++, but that's in even sketchier shape. There are a couple of contenders such as Kotlin and Ceylon, but so far they aren't real. So, if you want to do work with a statically typed language on the JVM that exists today, Scala is simply the pragmatic choice. It's a good thing that it's such a nice choice." Learn more about Scala by going to the interview here.

  Read the article

• Token based Authentication and Claims for Restful Services

  - by Your DisplayName here!

  WIF as it exists today is optimized for web applications (passive/WS-Federation) and SOAP based services (active/WS-Trust). While there is limited support for WCF WebServiceHost based services (for standard credential types like Windows and Basic), there is no ready to use plumbing for RESTful services that do authentication based on tokens. This is not an oversight from the WIF team, but the REST services security world is currently rapidly changing – and that’s by design. There are a number of intermediate solutions, emerging protocols and token types, as well as some already deprecated ones. So it didn’t make sense to bake that into the core feature set of WIF. But after all, the F in WIF stands for Foundation. So just like the WIF APIs integrate tokens and claims into other hosts, this is also (easily) possible with RESTful services. Here’s how. HTTP Services and Authentication Unlike SOAP services, in the REST world there is no (over) specified security framework like WS-Security. Instead standard HTTP means are used to transmit credentials and SSL is used to secure the transport and data in transit. For most cases the HTTP Authorize header is used to transmit the security token (this can be as simple as a username/password up to issued tokens of some sort). The Authorize header consists of the actual credential (consider this opaque from a transport perspective) as well as a scheme. The scheme is some string that gives the service a hint what type of credential was used (e.g. Basic for basic authentication credentials). HTTP also includes a way to advertise the right credential type back to the client, for this the WWW-Authenticate response header is used. So for token based authentication, the service would simply need to read the incoming Authorization header, extract the token, parse and validate it. After the token has been validated, you also typically want some sort of client identity representation based on the incoming token. This is regardless of how technology-wise the actual service was built. In ASP.NET (MVC) you could use an HttpModule or an ActionFilter. In (todays) WCF, you would use the ServiceAuthorizationManager infrastructure. The nice thing about using WCF’ native extensibility points is that you get self-hosting for free. This is where WIF comes into play. WIF has ready to use infrastructure built-in that just need to be plugged into the corresponding hosting environment: Representation of identity based on claims. This is a very natural way of translating a security token (and again I mean this in the widest sense – could be also a username/password) into something our applications can work with. Infrastructure to convert tokens into claims (called security token handler) Claims transformation Claims-based authorization So much for the theory. In the next post I will show you how to implement that for WCF – including full source code and samples. (Wanna learn more about federation, WIF, claims, tokens etc.? Click here.)

  Read the article

• Shelving &ndash; What is it &ndash; and more importantly, can it help me?

  - by Chris Skardon

  Since we shifted to TFS we’ve had the ability to perform what is known as ‘shelving’. Shelving (whilst not a wholly new topic in the world of SCC) is new to us, and didn’t exist in our previous SCC solution – SVN. Soo… what is it? What? Shelving is a way to check-in but not check-in your code. By shelving you submit a copy of your ‘pending changes’ to the SCC server, (which maintains a list of the shelvesets) and once that is done you can either continue working, or undo your changes, safe in the knowledge that a backup copy exists on the server. You can unshelve your code at any time and get back to the state you were when you shelved. Yer, that is great but why not just check it in?? Shelvesets don’t have to build. The shelveset you put in there could be entirely broken, or it might solve every bug in the system – shelves aren’t continuously integrated so you can shelve anything. Hmmmm… What else? Shelving allows us to do some pretty cool stuff that beforehand was quite frankly a pain. For instance – Gated Check-ins are implemented via the shelving mechanism, when code is checked-in, what you’re actually doing is shelving it, the Build Controller will build the shelveset with the original code and if it succeeds, the code will be committed, if it fails – well – it’s only you that has to fix the code :) Other nice features are things like the ability to share code you are working on… For example, if I was having trouble with a particular piece of code, I could shelve it, and then you (yes you) could then get that shelveset and check out the problem for yourself, and if you fix it?? Well – you could check-it in! Nice, but day-to-day shizzle? Let’s say you’ve been working on your project and your project manager comes over to you and says: “Hey, errr, bad times, there is an urgent bug we need you to fix, it needs to go out now!” (also for this to play out – we’ll need to assume you’re currently working in the 'release’ branch for another bug fix (maybe))… You could undo all your current changes (obviously you’ll probably backup your code using zip or something I imagine) fix the bug, then re-copy your backup over the top, or you could shelve and unshelve. Perhaps some other uses will awaken the shelver in you… :) Before each checkin – if you shelve, you no longer need to worry (if indeed you do) about resolving conflicts and mysteriously losing your code… Going home at night? Not checking in straight away? Why not shelve, this way – should the worst come to the worst and your local pc gives up, you can just get the shelveset onto another machine and be up and running in literally seconds minutes…

  Read the article

• links for 2010-12-22

  - by Bob Rhubart

  @hajonormann: BPM: Top Seven Architectural Topics in 2010 Oracle ACE Director Hajo Normann offers details on how to design a BPM/SOA solution including: modeling human interaction, improving BPM models, orchestrating composed services, central task management, new approaches for business-IT alignment, solutions for non-deterministic processes, and choreography. (tags: oracle otn soasymposium infoq soa bpm) InfoQ: Simplicity, The Way of the Unusual Architect Dan North talks about the tendency developers-becoming-architects have to create bigger and more complex systems. Without trying to be simplistic, North argues for simplicity, offering strategies to extract the simple essence from complex situations. (tags: ping.fm) Fun with Sun Ray, 3D, Oracle VM x86 and SRIOV (Wim Coekaerts Blog) "One of the things I like about my job is that I get to play around with stuff and make use of the technologies we work on in my teams. Sort of my own little playground." - Wim Coekaerts (tags: oracle otn virtualization oraclevm) Oracle VM VirtualBox 4.0.0 Released! (Oracle's Virtualization Blog) And you were worried about what to get that special someone for Christmas... (tags: oracle otn virtualization virtualbox) Virtual Developer Day: Oracle WebLogic Server & Java EE (#OTNVDD) (Oracle Technology Network Blog (aka TechBlog)) "Virtual Developer Day is back with a vengeance! On Feb. 1, login to learn how Oracle WebLogic Server enables a whole new level of productivity for enterprise developers." Registration is open. (tags: oracle otn events webinar java) New Coherence 3.6 Oracle University Course (Cristóbal Soto's Blog) Cristóbal Soto shares information on the "Oracle Coherence 3.6: Share and Manage Data in Clusters" course now available through Oracle University. (tags: oracle otn grid coherence) The Aquarium: Oracle WebLogic Server & Java EE developer day "Oracle WebLogic is well on its way to contribute to the general Java EE 6 momentum and the OTN Blog has just announced a Virtual Developer Day for Oracle WebLogic." (tags: oracle otn weblogic java) Enterprise 2.0 Use Cases for Semantic Web (Reiser 2.0) "How can an enterprise improve the efficiency and effectiveness of their Knowledge and Community model leveraging semantic technologies and social networking dynamics?" - Peter Reiser (tags: oracle otn enterprise2.0 semanticweb) John Gøtze: European Interoperability Framework 2.0 "This week, the European Commission announced an updated interoperability policy in the EU. The Commission has committed itself to adopt a Communication that introduces the European Interoperability Strategy (EIS) and an update to the European Interoperability Framework (EIF)..." - John Gøtze (tags: entarch Interoperability) Andy Mulholland: Maybe Web 3.0 is quite understandable – and a natural result "The idea of Web 1.0 = content, Web 2.0 = people and Web 3.0 = services has a nice symmetrical feel to it, in fact it feels basically right as such a definition would include the two other major definitions as well. So if we put these things all together what picture do we see?" - Andy Mulholland (tags: web2.0 web3.0) Ken Downs: A Working Definition of Business Logic, with Implications for CRUD Code "The Wikipedia entry on 'Business Logic' has a wonderfully honest opening sentence stating that 'Business logic, or domain logic, is a non-technical term...'"  (tags: businesslogic crud)

  Read the article

• Turn Chrome’s New Tab Page into an Ubuntu Forums Powerhouse

  - by Asian Angel

  There’s a lot of start page plug-ins for Google Chrome, but if you’re an Ubuntu Forums enthusiast, you might be interested in the powerful UbuntuForums.org Start Page extension. Using the Ubuntu Forums Chrome Start Page Once you’ve installed the extension and opened a new tab, you’ll notice quite a difference from the boring default “New Tab Page”. While you may look at this and wonder if what you see is all that there is to it, there’s actually a lot of hidden customization and functionality. The upper left corner is where you will control the content displayed in the “Ubuntu New Tab Page”. The “Buttons Toolbar” that you see at the top lets you shift between the types of content viewed, from RSS feeds to bookmarks and more. This entire set of links provides direct links to the appropriate section in the Ubuntu Forums. As with the set of links pictured above each of these will open in a new tab when clicked on. There’s even a feature to browse wallpapers from DesktopNexus with categories on the left and pictures to the right. If you want to return to the regular layout you should use the “Start Page Link” highlighted here. Options The options will allow you to customize the colors shown in the “Ubuntu New Tab Page” to create a very nice match to your current browser and/or system theme if desired. You can also do some customization to the fonts, “Bookmark Shortcuts”, and populate the “Custom Links Section” in the main page. Conclusion If you are an Ubuntu enthusiast then this will be a very useful extension to add to your browser. The wealth of direct links and built-in functionality make this extension worth trying. Links Download the Ubuntuforums.org Start Page extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Turn Off Auto-Play of Audio and Video CDs and DVDs in UbuntuScroll Backwards From the Ubuntu Server Command LineAnnouncing the How-To Geek ForumsDisable the System Beep on Ubuntu EdgyEnable Smooth fonts on Ubuntu Linux TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

  Read the article

• Oracle Service Cloud May 2014 Release – Focus on your driving by JP Saunders

  - by Tuula Fai

  The next time you’re twiddling dials on your car’s dashboard to get the air to blow in the right direction, and the right song to play on the stereo, while pulling on the wires to charge your phone and punching in passwords to re-sync your hands-free headset to take a call, consider this… Does having a better dashboard UI in your car improve your driving performance? The Tesla car has one of the most modern and intuitive dashboards in any commercial car today. It is actually based on the design of a smart phone, which can download apps and updates directly from the cloud.  The 17” touchscreen, Lynx-based dashboard totally integrates all channels and devices, allowing the driver to focus on the smooth driving and power of this luxury (toy) car.  What the folks at Tesla didn't do was avoid the complexity of our needs. Instead, they streamlined them. And, while we might not all be able to afford a Tesla, their approach demonstrates that a modern UI approach can ultimately make a positive difference in our lives and businesses.  This is why the productivity and effectiveness of a Modern Contact Center is many times greater than that of a traditional contact center. Agents in a Modern Contact Center get to focus on the task at hand, the customer engagement, rather than stumbling their way through Lego blocks of complexity.  The Oracle Service Cloud is a modern approach to customer service that empowers your agents to achieve greater focus on improving your operational and strategic success through streamlined business processes.  Here are some of the recent May 2014 release highlights to the Oracle Service Cloud: Performance Enhanced Desktop UI A modern agent desktop interface that optimizes clumsy tasks, logins, screens and workflows and is optimized for agent and system performance. Improvements include performance for drag-and-drop configurable views, saved searches, and improved caching for high-speed performance even during disconnected or slow internet access.  Customer Experience Routing A streamlined automatic way to connect the right customer need to the best agent skills, based on multidimensional variables such as product skills, language skills, workload, call volume to optimize the connection and resolution experience. On-The-Go Mobile Improvements to the Agent mobile app that extend connectivity to websites, and customer surveys that are mobile-ready and rendered for any device, and ensure the customer’s voice is captured while the insight is still top of mind.  Infused Social Engagement Enhancements to infused social capabilities allow agents to respond in social threads directly from within the agent desktop, with the information becoming part of the incident record for automatic actions (such as replay or escalate) triggered off the response. Front-End Siebel Contact Center The market leading online Web Customer Self-Service interface from the Oracle Service Cloud, is now out-of-the-box ready for Oracle Siebel customers. Deploy a new online web self-service interface in a matter of weeks to have customers self-serve and self-solve answers, with escalated incidents routed directly into the Oracle Siebel Contact Center. For more information on the latest enhancements for the Oracle Service Cloud, please see the Oracle Service Cloud May 2014 Capabilities and Benefits. Related blogs: Oracle Service Cloud Feb 2014

  Read the article

• Mouse Clicks, Reactive Extensions and StreamInsight Mashup

  I had an hour spare this afternoon so I wanted to have another play with Reactive Extensions in .Net and StreamInsight.  I also didn’t want to simply use a console window as a way of gathering events so I decided to use a windows form instead. The task I set myself was this. Whenever I click on my form I want to subscribe to the event and output its location to the console window and also the timestamp of the event.  In addition to this I want to know for every mouse click I do, how many mouse clicks have happened in the last 5 seconds. The second point here is really interesting.  I have often found this when working with people on problems.  It is how you ask the question that determines how you tackle the problem.  I will show 2 ways of possibly answering the second question depending on how the question was interpreted. As a side effect of this example I will show how time in StreamInsight can stand still.  This is an important concept and we can see it in the output later. Now to the code.  I will break it all down in this blogpost but you can download the solution and see it all together. I created a Console application and then instantiate a windows form.   frm = new Form(); Thread g = new Thread(CallUI); g.SetApartmentState(ApartmentState.STA); g.Start();   Call UI looks like this   static void CallUI() { System.Windows.Forms.Application.Run(frm); frm.Activate(); frm.BringToFront(); }   Now what we need to do is create an observable from the MouseClick event on the form.  For this we use the Reactive Extensions.   var lblevt = Observable.FromEvent<MouseEventArgs>(frm, "MouseClick").Timestamp();   As mentioned earlier I have two objectives in this example and to solve the first I am going to again use the Reactive extensions.  Let’s subscribe to the MouseClick event and output the location and timestamp to the console. lblevt.Subscribe(evt => { Console.WriteLine("Clicked: {0}, {1} ", evt.Value.EventArgs.Location,evt.Timestamp); }); That should take care of obective #1 but what about the second objective.  For that we need some temporal windowing and this means StreamInsight.  First we need to turn our Observable collection of MouseClick events into a PointStream Server s = Server.Create("Default"); Microsoft.ComplexEventProcessing.Application a = s.CreateApplication("MouseClicks"); var input = lblevt.ToPointStream( a, evt => PointEvent.CreateInsert( evt.Timestamp, new { loc = evt.Value.EventArgs.Location.ToString(), ts = evt.Timestamp.ToLocalTime().ToString() }), AdvanceTimeSettings.IncreasingStartTime);   Now that we have created out PointStream we need to do something with it and this is where we get to our second objective.  It is pretty clear that we want some kind of windowing but what? Here is one way of doing it.  It might not be what you wanted but again it is how the second objective is interpreted   var q = from i in input.TumblingWindow(TimeSpan.FromSeconds(5), HoppingWindowOutputPolicy.ClipToWindowEnd) select new { CountOfClicks = i.Count() };   The above code creates tumbling windows of 5 seconds and counts the number of events in the windows.  If there are no events in the window then no result is output.  Likewise until an event (MouseClick) is issued then we do not see anything in the output (that is not strictly true because it is the CTI strapped to our MouseClick events that flush the events through the StreamInsight engine not the events themselves).  This approach is centred around the windows and not the events.  Until the windows complete and a CTI is issued then no events are pushed through. An alternate way of answering our second question is below   var q = from i in input.AlterEventDuration(evt => TimeSpan.FromSeconds(5)).SnapshotWindow(SnapshotWindowOutputPolicy.Clip) select new { CountOfClicks = i.Count() };   In this code we extend the duration of each MouseClick to five seconds.  We then create  Snapshot Windows over those events.  Snapshot windows are discussed in detail here.  With this solution we are centred around the events.  It is the events that are driving the output.  Let’s have a look at the output from this solution as it may be a little confusing. First though let me show how we get the output from StreamInsight into the Console window. foreach (var x in q.ToPointEnumerable().Where(e => e.EventKind != EventKind.Cti)) { Console.WriteLine(x.Payload.CountOfClicks); }   Ok so now to the output.   The table at the top shows the output from our routine and the table at the bottom helps to explain the output.  One of the things that will help as well is, you will note that for our PointStream we set the issuing of CTIs to be IncreasingStartTime.  What this means is that the CTI is placed right at the start of the event so will not flush the event with which it was issued but will flush those prior to it.  In the bottom table the Blue fill is where we issued a click.  Yellow fill is the duration and boundaries of our events.  The numbers at the bottom indicate the count of events   Clicked 22:40:16                                 Clicked 23:40:18                                 1                                   Clicked 23:40:20                                 2                                   Clicked 23:40:22                                 3                                   2                                   Clicked 23:40:24                                 3                                   2                                   Clicked 23:40:32                                 3                                   2                                   1                                                                                                         secs 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32                                                                                                                                                                                                                         counts   1   2 3 2 3 2 3   2   1           What we can see here in the output is that the counts include all the end edges that have occurred between the mouse clicks.  If we look specifically at the mouse click at 22:40:32. then we see that 3 events are returned to us. These include the following End Edge count at 22:40:25 End Edge count at 22:40:27 End Edge count at 22:40:29 Another thing we notice is that until we actually issue a CTI at 22:40:32 then those last 3 snapshot window counts will never be reported. Hopefully this has helped to explain  a few concepts around StreamInsight and the IObservable() pattern.   You can download this solution from here and play.  You will need the Reactive Framework from here and StreamInsight 1.1

  Read the article

• Fraud and Anomaly Detection using Oracle Data Mining YouTube-like Video

  - by chberger

  I've created and recorded another YouTube-like presentation and "live" demos of Oracle Advanced Analytics Option, this time focusing on Fraud and Anomaly Detection using Oracle Data Mining.  [Note:  It is a large MP4 file that will open and play in place.  The sound quality is weak so you may need to turn up the volume.] Data is your most valuable asset. It represents the entire history of your organization and its interactions with your customers.  Predictive analytics leverages data to discover patterns, relationships and to help you even make informed predictions.   Oracle Data Mining (ODM) automatically discovers relationships hidden in data.  Predictive models and insights discovered with ODM address business problems such as:  predicting customer behavior, detecting fraud, analyzing market baskets, profiling and loyalty.  Oracle Data Mining, part of the Oracle Advanced Analytics (OAA) Option to the Oracle Database EE, embeds 12 high performance data mining algorithms in the SQL kernel of the Oracle Database. This eliminates data movement, delivers scalability and maintains security.  But, how do you find these very important needles or possibly fraudulent transactions and huge haystacks of data? Oracle Data Mining’s 1 Class Support Vector Machine algorithm is specifically designed to identify rare or anomalous records.  Oracle Data Mining's 1-Class SVM anomaly detection algorithm trains on what it believes to be considered “normal” records, build a descriptive and predictive model which can then be used to flags records that, on a multi-dimensional basis, appear to not fit in--or be different.  Combined with clustering techniques to sort transactions into more homogeneous sub-populations for more focused anomaly detection analysis and Oracle Business Intelligence, Enterprise Applications and/or real-time environments to "deploy" fraud detection, Oracle Data Mining delivers a powerful advanced analytical platform for solving important problems.  With OAA/ODM you can find suspicious expense report submissions, flag non-compliant tax submissions, fight fraud in healthcare claims and save huge amounts of money in fraudulent claims  and abuse.   This presentation and several brief demos will show Oracle Data Mining's fraud and anomaly detection capabilities.  

  Read the article

• SQL Saturday 43 (Redmond, WA) Review

  - by BuckWoody

  Last Saturday (June 12th) we held a “SQL Saturday” (more about those here) event in Redmond, Washington. The event was held at the Microsoft campus, at the Mixer in our new location called the “Commons”. This is a mall-like area that we have on campus, and the Mixer is a large building with lots of meeting rooms, so it made a perfect location for the event. There was a sign to find the parking, and once there they had a sign to show how to get to the building. Since it’s a secure facility, Greg Larsen and crew had a person manning the door so that even late arrivals could get in. We had about 400 sign up for the event, and a little over 300 attend (official numbers later). I think we would have had a lot more, but the sun was out – and you just can’t underestimate the effect of that here in the Pacific Northwest. We joke a lot about not seeing the sun much, but when a day like what we had on Saturday comes around, and on a weekend at that, you’d cancel your wedding to go outside to play in the sun. And your spouse would agree with you for doing it. We had some top-notch speakers, including Clifford Dibble and Kalen Delany. The food was great, we had multiple sponsors (including Confio who seems to be at all of these) and the attendees were from all over the professional spectrum, from developers to BI to DBA’s. Everyone I saw was very engaged, and when I visited room-to-room I saw almost no one in the halls – everyone was in the sessions. I also saw a much larger Microsoft presence this year, especially from Dan Jones’ team. I had a great turnout at my session, and yes, I was wearing an Oracle staff shirt. I did that because I wanted to show that the session I gave on “SQL Server for the Oracle DBA” was non-marketing – I couldn’t exactly bash Oracle wearing their colors! These events are amazing. I can’t emphasize enough how much I appreciate the volunteers and how much work they put into these events, and to you for coming. If you’re reading this and you haven’t attended one yet, definitely find out if there is one in your area – and if not, start one. It’s a lot of work, but it’s totally worth it.       Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Install 32-bit gstreamer plugins on 64-bit

  - by Rua

  I am trying to install the 32-bit gstreamer plugins on my 64-bit system (Ubuntu 12.10 based). I can install the packages gstreamer0.10-plugins-base:i386 and gstreamer0.10-plugins-good:i386. However, gstreamer0.10-plugins-bad:i386, gstreamer0.10-plugins-bad-multiverse:i386 and gstreamer0.10-plugins-ugly:i386 conflict with 64-bit packages already installed on my system: $ sudo apt-get install gstreamer0.10-plugins-bad:i386 Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gstreamer0.10-plugins-bad:i386 : Depends: libass4:i386 (>= 0.9.7) but it is not going to be installed Depends: libdca0:i386 but it is not going to be installed Depends: libdvdnav4:i386 (>= 4.2.0+20120524) but it is not going to be installed Depends: libdvdread4:i386 but it is not going to be installed Depends: libslv2-9:i386 (>= 0.6.4-1~) but it is not going to be installed E: Unable to correct problems, you have held broken packages. ... $ sudo apt-get install gstreamer0.10-plugins-bad-multiverse:i386 Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libavcodec53:i386 libavutil51:i386 libfaac0:i386 libfaad2:i386 libgsm1:i386 libmjpegtools-1.9:i386 libmp3lame0:i386 libquicktime2:i386 libschroedinger-1.0-0:i386 libswscale2:i386 libva1:i386 libvpx1:i386 libx264-123:i386 libxvidcore4:i386 The following packages will be REMOVED: gstreamer0.10-plugins-bad-multiverse libfaac0 libmjpegtools-1.9 mint-meta-codecs The following NEW packages will be installed: gstreamer0.10-plugins-bad-multiverse:i386 libavcodec53:i386 libavutil51:i386 libfaac0:i386 libfaad2:i386 libgsm1:i386 libmjpegtools-1.9:i386 libmp3lame0:i386 libquicktime2:i386 libschroedinger-1.0-0:i386 libswscale2:i386 libva1:i386 libvpx1:i386 libx264-123:i386 libxvidcore4:i386 0 upgraded, 15 newly installed, 4 to remove and 5 not upgraded. Need to get 9,198 kB of archives. After this operation, 23.3 MB of additional disk space will be used. Do you want to continue [Y/n]? ... $ sudo apt-get install gstreamer0.10-plugins-ugly:i386 Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gstreamer0.10-plugins-ugly:i386 : Depends: libdvdread4:i386 but it is not going to be installed E: Unable to correct problems, you have held broken packages. This means that I can't play mp3s (among other things) in 32-bit applications that use gstreamer. Is there a way around this?

  Read the article

• TouchDevelop: The Fast Path to Windows 8 and Phone Apps

  - by Clint Edmonson

  Are you looking for a little extra cash for the upcoming holidays? Then you might be interested in creating some cool apps to sell in the Windows Store. Or maybe you’re simply curious and want to try your hand at developing for Windows 8 and Windows Phone. In either case, the newly released TouchDevelop Web App is for you. TouchDevelop Web App is a development environment to create apps on your tablet or smartphone, without requiring a separate PC. Scripts written by using TouchDevelop can access data, media, and sensors on the phone, tablet, and PC. The script can interact with cloud services, including storage, computing, and social networks. TouchDevelop lets you quickly create fun games and useful tools, turning your scripts into true Windows Phone and Windows 8 apps. A year ago, Microsoft Research released TouchDevelop for Windows Phone, which is being used by enthusiasts, students, and researchers to program their phones in fun, inventive, and interesting ways. These scripts are available at TouchDevelop for anyone to download and use. Ever since we released TouchDevelop, we’ve been eyeing the tablet form factor and working on a version for the browser. Now, with the release of TouchDevelop Web App, the wait is over: the tablet version is ready, so go play around with it. All TouchDevelop scripts that are developed on the smartphone can be downloaded to the tablet and run (if hardware allows). Any script that is developed on the tablet can also be accessed on the phone. And scripts can be converted to Windows Phone or Windows 8 apps and submitted to the Windows Phone Store or Windows Store, respectively. TouchDevelop Web App’s editor and programming language have been designed for tablet devices with touchscreens, but you can also use a keyboard and a mouse. So grab your web-enabled device and give the TouchDevelop Web App a try. It’s fun and easy, and could even put a little cash in your holiday-depleted wallet. Or at least give you bragging rights at family get-togethers. Are you interested in further tips on Windows 8 development?  Sign up for the 30 to launch program which will help you build a Windows Store application in 30 days.  You will receive a tip per day for 30 days, along with potential free design consultations and technical support from a Windows 8 expert. As always, stay tuned to my twitter feed for Windows 8, Windows Azure and other Microsoft announcements, updates, and links: @clinted

  Read the article

• Various issues linked to my CD drive, when it has a disc in it

  - by Voyagerfan5761

  When I go to the Desktop and click on a media icon (for my flash drive, a CD, whatever it is), the following problems occur, in this approximate sequence: Nautilus will close if it's open. the desktop icons disappear my Window List shows a button that says "Starting File Manager" the icons reappear the button in Window List disappears Because of this problem, I can no longer drag and drop media, nor can I right-click to perform actions such as "Eject" and "Safely Remove Drive". The same symptoms occur if I click a media icon (that is also present on the desktop) in Nautilus' Computer view, though notably not if I click in the places list on the left. I have confirmed that this problem happens only if there is a CD in the drive (Matshita UJDA360). Also, inserting a disc into the CD drive appears to kill all running programs and restart Nautilus (or X; I'm not sure). Applications like Brasero and Rhythmbox will not start while there is a disc in the drive. Removing the disc doesn't result in the list of media updating; it must be forced to update by clicking on one of the desktop icons and going through one of the above-described cycles. It doesn't seem to matter what type of disc is in the drive. This has happened with CD-RWs I burned years ago using Roxio on Windows XP, the Ubuntu disc I installed from (burned with InfraRecorder Portable under Windows XP), and the retail game disc for Star Trek Armada II. The first indication of a problem was Brasero dying when I tried to insert a disc for erasure and rewriting. Since then, I've drafted several different questions on various issues, finally combining them into this one when I realized that having a CD in the drive was the common link. Could this be a simple driver issue? If Ubuntu is dynamically detecting my hardware on boot, can I specify drivers for devices that I know will be a problem if the default files are used? I'm beginning to think that my laptop, an old Dell Inspiron 2650, is just too old or proprietary-driver-hungry (or something, maybe RAM-starved) for Ubuntu and Windows XP to play nicely alongside each other. Or maybe I just need to carefully take my wall-wart machine to a coffee shop for an afternoon so I can download updates and such from the Internet, as I lack a home connection.

  Read the article

• How to execute a Ruby file in Java, capable of calling functions from the Java program and receiving primitive-type results?

  - by Omega

  I do not fully understand what am I asking (lol!), well, in the sense of if it is even possible, that is. If it isn't, sorry. Suppose I have a Java program. It has a Main and a JavaCalculator class. JavaCalculator has some basic functions like public int sum(int a,int b) { return a + b } Now suppose I have a ruby file. Called MyProgram.rb. MyProgram.rb may contain anything you could expect from a ruby program. Let us assume it contains the following: class RubyMain def initialize print "The sum of 5 with 3 is #{sum(5,3)}" end def sum(a,b) # <---------- Something will happen here end end rubyMain = RubyMain.new Good. Now then, you might already suspect what I want to do: I want to run my Java program I want it to execute the Ruby file MyProgram.rb When the Ruby program executes, it will create an instance of JavaCalculator, execute the sum function it has, get the value, and then print it. The ruby file has been executed successfully. The Java program closes. Note: The "create an instance of JavaCalculator" is not entirely necessary. I would be satisfied with just running a sum function from, say, the Main class. My question: is such possible? Can I run a Java program which internally executes a Ruby file which is capable of commanding the Java program to do certain things and get results? In the above example, the Ruby file asks the Java program to do a sum for it and give the result. This may sound ridiculous. I am new in this kind of thing (if it is possible, that is). WHY AM I ASKING THIS? I have a Java program, which is some kind of game engine. However, my target audience is a bunch of Ruby coders. I don't want to have them learn Java at all. So I figured that perhaps the Java program could simply offer the functionality (capacity to create windows, display sprites, play sounds...) and then, my audience can simply code with Ruby the logic, which basically justs asks my Java engine to do things like displaying sprites or playing sounds. That's when I though about asking this.

  Read the article

• Impatient Customers Make Flawless Service Mission Critical for Midsize Companies

  - by Richard Lefebvre

  At times, I can be an impatient customer. But I’m not alone. Research by The Social Habit shows that among customers who contact a brand, product, or company through social media for support, 32% expect a response within 30 minutes and 42% expect a response within 60 minutes! 70% of respondents to another study expected their complaints to be addressed within 24 hours, irrespective of how they contacted the company. I was intrigued when I read a recent blog post by David Vap, Group Vice President of Product Development for Oracle Service Cloud. It’s about “Three Secrets to Innovation” in customer service. In David’s words: 1) Focus on making what’s hard simple 2) Solve real problems for real people 3) Don’t just spin a good vision. Do something about it  I believe midsize companies have a leg up in delivering on these three points, mainly because they have no other choice. How can you grow a business without listening to your customers and providing flawless service? Big companies are often weighed down by customer service practices that have been churning in bureaucracy for years or even decades. When the all-in-one printer/fax/scanner I bought my wife for Christmas (call me a romantic) failed after sixty days, I wasted hours of my time navigating the big brand manufacturer’s complex support and contact policies only to be offered a refurbished replacement after I shipped mine back to them. There was not a happy ending. Let's just say my wife still doesn't have a printer.  Young midsize companies need to innovate to grow. Established midsize company brands need to innovate to survive and reach the next level. Midsize Customer Case Study: The Boston Globe The Boston Globe, established in 1872 and the winner of 22 Pulitzer Prizes, is fighting the prevailing decline in the newspaper industry. Businessman John Henry invested in the Globe in 2013 because he, “…believes deeply in the future of this great community, and the Globe should play a vital role in determining that future”. How well the paper executes on its bold new strategy is truly mission critical—a matter of life or death for an industry icon. This customer case study tells how Oracle’s Service Cloud is helping The Boston Globe “do something about” and not just “spin” it’s strategy and vision via improved customer service. For example, Oracle RightNow Chat Cloud Service is now the preferred support channel for its online environments. The average e-mail or phone call can take three to four minutes to complete while the average chat is only 30 to 40 seconds. It’s a great example of one company leveraging technology to make things simpler to solve real problems for real people. Related: Oracle Cloud Service a leader in The Forrester Wave™: Customer Service Solutions For Small And Midsize Teams, Q2 2014

  Read the article

• What location to put bootloader, when running multiple drives and partition

  - by Matt G

  I have Win8 on my desktop, where a 120G SSD is used to run windows and some select applications, while I have a 2TB HDD to provide basic file storage and where possible, install applications instead of on the SSD. I want to install Ubuntu on a new partition of the HDD (I allocated 300GB, with 5GB swap file). I've used a USB to install the OS, which seemed to have done the job. However, after prompting for a restart, I can no longer boot to ubuntu. During instillation I was confused about where to install the "boot loader instillation". I ended up selecting "/dev/stb" because I figured I would be able to boot with BIOS by selecting the HDD drive as a priority over the SSD. The bootloader is a large part of where I think I went wrong. My partition system looked something like this: /dev/sta ... //SSD ~120 GB /dev/sta1 NTFS (350 MB) //Win8System /dev/sta2 NTFS (118 GB) //Win8C-Drive /dev/stb ... //HDD ~2TB /dev/stb1 NTFS (1563 GB) //FileStorage /dev/stb5 Free Space (300 GB) //Space I want to use for Linux (NOTE: Created two partitions from the 300GB, ~5GB and 295GB. stb5,stb6.) It'd be great if I could get an explanation of what drive you'd select for the boot loader and why, and what selections won't work with regards to the Boot Loader Instillation. I think I understand what Grub is, but I have no idea on how to use it, or play around with it. I seem to be able to get back into OS from my usb, however I believe it's just showing me a preview/trial of Ubuntu (ie, can't access any of the system NTFS drives). Note, if I try to install from the USB again, it will recognize that a version of Ubuntu 13.10 exists on the system. Apologies in advance, have used windows all my life, don't really know to much about Linux at all. Did have a brief skim over some similar questions, didn't find anything too useful. - Where to install bootloader when installing Ubuntu as secondary OS? - ubuntu 12.10 dual boot with windows 8 on two hdds - Dual-boot Windows 7 and Ubuntu on two SSDs with UEFI

  Read the article

• TechEd 2012: Windows 8 And Metro

  - by Tim Murphy

  Windows 8 is here (or at least very close) and that was the main feature of this morning’s key note.  Antoine LeBlond started off by apologizing to the IT professionals since he planned on showing code.  I’m not sure if IT Pros are that easily confused or why you would need such a disclaimer.  Developers do real work, IT Pros just play with toys (just kidding). The highlights of the Windows 8 keynote for me started with some of the UI design elements that I had not seen when I was shown one of the Build tablets.  Specifically I liked the AppBar features that we have become used to with Windows Phone and some of the gesture features.  Even though they have been available on other platforms before I think Microsoft really got them right. Two other great features of Windows 8 that they demonstrated were the Hyper-V capabilities and the ability to run Windows 8 anywhere from a USB key.  My jaw dropped through the floor seeing a feature rich OS boot off of a thumb drive. WOW!  I also can’t wait to get rid of dual booting just to run Hyper-V images when developing. The morning continued with a session on Metro XAML development with Tim Heuer.  While included a lot of great XAML Metro demos, I was pleasantly surprised by some of the things I found out about Visual Studio 2012.  Finding out that Blend is now integrated with VS2012 was a nice addition after working with them as separate applications was an encouraging start. Moving on to Metro he introduced the nugget that WinRT is Async everywhere.  How deep this model goes will be an interesting thing to find out as I learn more about developing for the platform.  Thankfully he followed that up with a couple of new keywords, await and async, that eliminates a lot of plumbing that has been required in the past for asynchronous transactions. Tim also related that since the Metro framework is relatively small and most apps will use a significant amount of it the entire surface is referenced by default.  This is a contrast to adding namespace and assemblies one after another as we normally do. This was such a power packed session that I can’t detail it all here so here is the teaser list. New icons in VS2012 for extension methods Emulator/simulator testing features for gestures Portable class libraries XAML no longer managed code And so much more …   del.icio.us Tags: Windows 8,Metro,Tim Heuer,XAML,Widows Phone,Hyper-V,Antoine LeBlond,TechEd,TechEd 2012,Visual Studio 2012,Visual Studio

  Read the article

• SQL Saturday 43 (Redmond, WA) Review

  - by BuckWoody

  Last Saturday (June 12th) we held a “SQL Saturday” (more about those here) event in Redmond, Washington. The event was held at the Microsoft campus, at the Mixer in our new location called the “Commons”. This is a mall-like area that we have on campus, and the Mixer is a large building with lots of meeting rooms, so it made a perfect location for the event. There was a sign to find the parking, and once there they had a sign to show how to get to the building. Since it’s a secure facility, Greg Larsen and crew had a person manning the door so that even late arrivals could get in. We had about 400 sign up for the event, and a little over 300 attend (official numbers later). I think we would have had a lot more, but the sun was out – and you just can’t underestimate the effect of that here in the Pacific Northwest. We joke a lot about not seeing the sun much, but when a day like what we had on Saturday comes around, and on a weekend at that, you’d cancel your wedding to go outside to play in the sun. And your spouse would agree with you for doing it. We had some top-notch speakers, including Clifford Dibble and Kalen Delany. The food was great, we had multiple sponsors (including Confio who seems to be at all of these) and the attendees were from all over the professional spectrum, from developers to BI to DBA’s. Everyone I saw was very engaged, and when I visited room-to-room I saw almost no one in the halls – everyone was in the sessions. I also saw a much larger Microsoft presence this year, especially from Dan Jones’ team. I had a great turnout at my session, and yes, I was wearing an Oracle staff shirt. I did that because I wanted to show that the session I gave on “SQL Server for the Oracle DBA” was non-marketing – I couldn’t exactly bash Oracle wearing their colors! These events are amazing. I can’t emphasize enough how much I appreciate the volunteers and how much work they put into these events, and to you for coming. If you’re reading this and you haven’t attended one yet, definitely find out if there is one in your area – and if not, start one. It’s a lot of work, but it’s totally worth it.       Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Managing Joomla via Android

  Surprisingly, it was only today that I actually looked for possible solutions to write more content for my blog. Since quite some time I'm using my Samsung Galaxy Tab 10.1 for all kind of social media activities like Google+, FB, etc. but also for my casual mail during the evening hours. And yes, I feel a little bit guilty about missing the chance to use my tablet to write some content here... OK, only a little bit. ;-) These are not the droids you are looking for But those lazy times are over! While searching the Play Store with the expression 'joomla' I got three interesting hits: - Joomla Admin Mobile! - Joooid - Joomla! Security Checklist After reading the reviews I installed the two later apps. Joomla! Security Checklist The author clearly outlines here that the app is primarily for his personal purpose to have safety checklist at hand at anytime. I guess that any reader of this article has an Android based smartphone or tablet, so that simple app should be part of your toolbox when using Joomla! for your websites. Joooid plugin & app Although I was looking for an app that could work with the default XML RPC interface of Joomla I have to admit that this combination of an enhanced Web service suits me better, mainly due to performance reason. The official website has not only the downloads for Joomla versions 1.5 - 2.5 but also very good and easy to follow step-by-step instructions to prepare your server for the Android app. It will take you less than 5 minutes to get it up and running. For safety reasons, I recommend that you should configure your Web server to have an additional authentication layer on the plugins folder. The smartphone app has the ability to run against HTTP authentication. Personally, I like the look and feel of the app. It is a little bit different compared to the web UI but still easy to use. In fact, this article is the first one written in the Joooid app. At the moment, I only miss the ability to have list tags. Quick and easy Writing full-fledged articles with images, a couple of hyperlinks and some styling here and there should be left to the desktop. At least for the moment. Let's see whether I'm going to change my mind on this during the upcoming months... I'll give it a try, and hope to publish at least once per month to write some content using Joooid. Actually, it would be great to have some feedback about other Joomla! clients in the wild.

  Read the article

• .Net Application & Database Modularity/Reuse

  - by Martaver

  I'm looking for some guidance on how to architect an app with regards to modularity, separation of concerns and re-usability. I'm working on an application (ASP.Net, C#) that has distinctly generic chunks of functionality, that I'd love to be able to lift out, all layers, into re-usable components. This means the module handles the database schema, data access, API, everything so that the next time I want to use it I can just register the module and hook into it. Developing modules of re-usable functionality is a no-brainer, but what is really confusing me is what to do when it comes to handling a core re-usable database schema that serves the module's functionality. In an ideal world, I would register a module and it would ensure that the associated database schema exists in the DB. I would code on the assumption that the tables exist, calling the module's functionality through the DLL, agnostic of the database layer. Kind of like Enterprise Library's Caching/Logging Application Block, which can create a DB schema in the target DB to use as a data store. My Questions is: What do you think is the best way to achieve this, firstly, in terms design architecture, and secondly solution structure. What patterns/frameworks do you know that exist & support this kind of thing? My thoughts so far: I mostly use Entity Framework and SQL Server DB Projects. I thought about a 'black box' approach to modules of functionality. I could use use a code-first approach in EF4, and use the ObjectContext to create a database when the module is initialized. However this means that all of the entities that my module encapsulates would be disconnected from the rest of the application because they belonged to an abstracted ObjectContext. Further - Creating appropriate indexes and references between domain entities and the module's entities would be impossible to do practically. I've thought of adopting Enterprise Library and creating my own Application Blocks. I'm not sure how this would play nice with Entity Framework (if at all) though. I like the idea of building on proven patterns & practices to encapsulate established, reusable functionality. I thought of abandoning Entity Framework for the Module, and just creating a separate DB schema for the module with its own set of stored procedures & ADO.Net. Then deploying the script at run-time if interrogation shows that it doesn't exist. But once again, for application developing outside of the application, I would want to use Entity Framework and I would have to use the module separately, disconnected from the domain ObjectContext. Has anyone had experience developing these sorts of full-stack modules? What advice can you offer? Am I biting off more than I can chew?

  Read the article

< Previous Page | 570 571 572 573 574 575 576 577 578 579 580 581  | Next Page >