Search Results

Search found 26263 results on 1051 pages for 'linux guest'.

Page 574/1051 | < Previous Page | 570 571 572 573 574 575 576 577 578 579 580 581  | Next Page >

  • Configure Postfix to use external MX servers for delivery of local mail if user is unknown

    - by mr.b
    I have a following setup: linux box with postfix configured to be responsible for example.com domain domain's MX servers are configured so that mail sent to example.com is sent to google mail servers several user accounts on linux machine exist (same machine also hosts example.com site) When someone from the outside attempts to send mail to address ending with @example.com, it gets routed to google mail (and there handled appropriately). When linux machine tries to send mail to outside world, mail is delivered correctly, as reverse dns and spf records are configured correctly, so linux machine is valid mail sender for example.com domain (along with google mail servers). However, here's the problem. When php application (hosted at linux box) tries to send mail to [email protected] (and someuser doesn't exist on linux box), it fails, since it doesn't even consult google mail servers, but postfix smtp locally concludes that "someuser" is unknown. So, the question is: how do I tell postfix to relay mails sent to @example.com domain to google mail servers (so, to servers specified in MX records), IF and only if a mailbox is not found locally.

    Read the article

  • Macbook Pro + Windows: How to make external monitor default monitor for games

    - by Linux Jedi
    When I boot into Windows on my Macbook Pro, I am unable to make the external monitor the default monitor. So when I play games full screen, they automatically open up on my laptop monitor. I want them to open up on my secondary monitor. The only solution I found to this is to make my external monitor mirror my laptop monitor. I can't even close the lid of the laptop monitor because that will cause the system to go to sleep.

    Read the article

  • Some info about SD card patitions after the use of the dd statment and some oiters doubts?

    - by AndreaNobili
    I am not very experienced using Linux and I have the following situation that cause me some doubts. I have wrote RaspBian (the RaspBerry linux distribution) on an SD card using Ubuntu dd statment: sudo dd if=2014-01-07-wheezy-raspbian.img of=/dev/sdb bs=1024 So if now I perform the fdisk -l statment I obtain that I have 2 partitions related to my SD card, that are the followins: Dispositivo Boot Start End Blocks Id System /dev/sdb1 8192 122879 57344 c W95 FAT32 (LBA) /dev/sdb2 122880 5785599 2831360 83 Linux And now the first doubt: the dd statment create on the SD card two partitions: 1) /dev/sdb1 that is a litle FAT32 partition (what it means (LBA)?) 2) /dev/sdb2 that is a larger Linux ext3 partition Ok...the doubt is: why it also create to me a FAT32 partition and not only a Linux ext3 partition? Ok...if I go into my computer resource I can see a device (related to my SD card) into the devices list that contains some RaspBian file, following a screenshot: And if I see the property of this device I obtain this: So, looking at the previous screenshot it seems to me that this is the small FAT32 partition, and now I have the followings doubts: If it is the smallest FAT32 partition, what contains? The RaspBian boot or what? Why, in the devices list, I have only the FAT32 partition and not also the Linux one (/dev/sdb2), to see it have I to mount it? how? Tnx

    Read the article

  • How can I connect to a Windows (7) running in VirtualBox from the network with RDP?

    - by Andre
    I have a Windows7 guest running in a VirtualBox hosted by Precise (Ubuntu 12.04 LTS). In the settings of the virtual machine I have activated the 'Remote Display' (Enable Server) with default settings (server port, authentication method). The network of the guest is attached to NAT. I try to use Remmina to connect from the host to the guest. I tried 127.0.0.1, 127.0.0.2, the internal IP of Win7 (10. ...). Did not work so far. Do I have to active something and what on Win7 (home premium)? I would like to connect to the Win7 remote desktop from the local network. Can I stay in NAT mode (preferred due to our network policy), or do I have to go for 'bridged'? Thanks!

    Read the article

  • How to convert a video to 4:3 or 16:9 aspect ratio without loss of video quality

    - by Linux Jedi
    I uploaded my video to youtube and the highest resolution it appears as is 360p. This is much lower than what I uploaded. I believe that youtube isn't making higher resolutions available for my video because of its aspect ratio. The video is 720x400. How can I convert this to a different aspect ratio without losing any of the picture or picture quality? I don't care if blank space appears around the video so long as the picture doesn't get stretched horizontally or vertically.

    Read the article

  • Wired connection to windows ISC stopped working

    - by cmpickle
    I have had my Linux box connected to the internet through a Windows computer by wiring them together with a cat5 cable then the Windows is connected wireless to a router. This setup has worked since I got the Linux box but just yesterday stopped working. The changes that occurred were: I changed networking so that I was connecting the Linux box and Windows computer through a second router so during that time the Linux box went through a router to connect to the Windows computer that was still connected wireless to the first router. The Internet didn't work on the Linux box at the time they second router was involved when I removed it and directly connected the Linux box and Windows the Internet worked again. Another thing that changed was that I had disconnected my Windows computer from all network connections and deleted them to make my Ethernet work better. Also at that time my dad had I connect the Windows to a third router and changed some settings in it. After reconnecting this time the connection between the router and the windows would not establish. If anyone has any ideas as to why this is I would greatly appreciate it!

    Read the article

  • Unable to enumerate USB device on port 2 when connecting Android phone

    - by ProfessionalAmateur
    I'm running Ubuntu 11.10 (64-bit) as a VirtualBox guest on a Win7 64-bit host. When I plug in my Android Epic4g (Galaxy S) both the host and guest see the device properly, however lsusb does not. When I run dmesg I get the following: [ 361.664219] usb 1-2: new full speed USB device number 79 using ohci_hcd [ 362.428798] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 363.313782] hub 1-0:1.0: unable to enumerate USB device on port 2 I get the same type of dmesg message with the USB 2.0 (ECHI) Controller enabled and disabled for the guest OS. I'm stuck with this one, can anyone help?

    Read the article

  • Text on Cisco ASA console is garbled/missing letters

    - by Some Linux Nerd
    I've actually looked up a number of solutions for this problem and none of them work. There's this Cisco ASA 5505 that I'd like to use, that outputs mildly garbled text with missing characters. I did some googling and found that the most likely problem is a bad baud rate, so I tried all the baud rates, 7N1, 8N2... basically every possibility minicom had. Then I figured (since I can type ok, just not read) that if I factory reset it that it would fix whatever is set wrong with the terminal. That didn't work either. This usb-db9 adapter and console cable work fine on the catalyst switch in our office. My serial settings are 9600 8N1 with no flow control. Anyone know how to fix this? I have an example of the text on pastebin: http://pastebin.com/MAJF0mVU - it's just lots of "Dfaut cnfiuraionfil cotais 1enty." instead of "Default configuration blah blah"

    Read the article

  • How to configure a Logitech USB headset on Fedora 14 [closed]

    - by Humble Debugger
    I have a Logitech USB headset http://www.amazon.com/gp/product/B003NREDG4 but I can't hear anything nor input anything through it. I am working on a Fedora 14 desktop. cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfebdc000 irq 51 2 [Headset ]: USB-Audio - Logitech USB Headset Logitech Logitech USB Headset at usb-0000:00:1d.0-2, full speed /sbin/lsmod | grep -c snd 14 lsusb Bus 008 Device 002: ID 046d:c529 Logitech, Inc. Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 004: ID 046d:0a0b Logitech, Inc. ClearChat Pro USB Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Please advise

    Read the article

  • Booting Ubuntu 12.04 from external eSATA disk

    - by Lord of Scripts
    This is my system topology: Disk #1 (SATA Internal) C: D: (Windows 7 Ultimate) Disk #2 (SATA Internal) E: (Windows Backup) Disk #3 (eSATA External) H: I: (Other windows data) /dev/sdc3 Linux Swap /dev/sdc4 Extended partition /dev/sdc5 Linux / So, I originally had there Ubuntu 8.1 from years ago but never got to use it. Now I used the Ubuntu 12.04 Live CD to install on that same location (That live CD takes a century to boot on a 6GB Intel i7 system...). The installation went fine, I selected it to install on /dev/sdc5 but it never asked me for any boot stuff, where I wanted to install Grub or whatever it is that it uses nowaways (I come from the LILO days when it always worked :-) So, yet again I can't access my new Linux installation. I have to wait a century to boot the "Live" CD and it allows me to see my new installation but I can't do anything with it. I tried the approach of this blog post. Copied the linux.bin of /dev/sdc5 into C: and used the BCDEdit steps to declare the new OS. So when I boot I see the Windows Boot menu and select Linux and after than I only get a black screen with a blinking cursor on the upper left. I can boot into Windows though. So, perhaps it didn't install the boot code on /dev/sdc5? I used this setup years ago booting from Windows with a BIN file: dd if=/dev/sdc5 of=/mnt/share/C/linux.bin bs=512 count=1 I am very reluctant to run GRUB because years ago I did and it wiped out my Windows boot sector and took quite some effort to recover it and be able to boot Windows again. I have been trying to install GRUB on a blank USB stick but I can't find anything clear enough. My system does NOT have a floppy. So can someone give me some ideas about how to get control of my Ubuntu 12.04 installation?

    Read the article

  • Unable to turn on seamless mode in VirtualBox

    - by user11658
    I'm not able to switch to Seamless Mode in VirtualBox with Ubuntu 10.04 or 9.10 as guest OS's. I have tried the seamless mode with XP as guest OS, and it works absolutely fine. The host OS is Windows 7. I have in-built Via/S3G Unichrome Pro IGP graphics, and I have allocated 30 MB out of 64 MB of graphics memory. I've also 1.5 GB of RAM. I also tried installing Guest Additions but it still didn't work. VirtualBox version is 4.0.4r70112. How can I get the seamless mode to work? Please help!

    Read the article

  • How to run Virtualbox on bridged and host-only networks?

    - by ril44
    I wish to run VirtualBox with my Ubuntu laptop on the home network (so the desktop PC can access it through the router) and also be able to ssh into the VirtualBox from host on the go (different network or with no internet). Previously, the only network adapter on the VB instance was a 'bridged connection' adapter. This allowed me to access the internet on the guest VB and for the other computers on the LAN + host to access it. However, whenever I took my laptop off the network, I could no longer access the guest from host. I read that I needed to enable a host-only adapter to access it off the network and a NAT adapter is used to access the internet from guest. My question is can I run a host-only adapter + a NAT adapter alongside a bridged network adapter in VirtualBox? I am confused what I would put inside /etc/hosts? Would I put both IP's (host-only and bridged) with the same servername in /etc/hosts?

    Read the article

  • after BIOS splash, will not boot -- asks me to select an OS, but it just reboots

    - by user92040
    I'm running Linux Mint 13 MATE 64-bit. Everything has been working for several weeks. Yesterday, when I tried to boot up my computer, after the BIOS screen flashes I reach a screen with a black background that reads at the top: GNU GRUB version1.99-21ubuntu3.4 Then there is a box in which I can select from the following lines: Linux Mint 13 MATE 64-bit, 3.2.0-31-generic (/dev/sdb2) Linux Mint 13 MATE 64-bit, 3.2.0-31-generic (/dev/sdb2) -- recovery mode Previous Linux versions Memory test (memtest86+) Memory test (memtest86+, serial console 115200) At the bottom it reads: Use the ? and ? keys to select which entry is highlighed. Press enter to boot the selected OS, 'e' to edit the commands before booting or 'c' for a command-line. I have no idea why it started doing this and, worse, I have no idea how to get out of here. No matter which option I select, I can't get it to boot the OS. If I select either of the first two, it reboots to splash the BIOS and then I'm right back where I started. If I choose "Previous Linux versions" I get essentially the same screen with only two choices (which are the same as the first two choices listed above, Linux 13 MATE and the recovery mode). Again, choosing either one of those results in a reboot. If I try to run either of the memtest options, it reads: error: unknown command 'linux16', Press any key to continue... Then it brings me back to the same screen Can anyone help me please? Intel Core i5-2500 ASUS P8Z68-V LX Intel Motherboard G. Skill Ripjaws series F3-12800CL9D-8GBRL (4GB x2) Plextor 128GB M5S Series SSD

    Read the article

  • Convert from apache rewrite to nginx

    - by Linux Intel
    I want to convert from apache rewrite modules to nginx RewriteCond %{QUERY_STRING} mosConfig_[a-zA-Z_]{1,21}(=|\%3D) [OR] RewriteCond %{QUERY_STRING} base64_encode.*\(.*\) [OR] RewriteCond %{QUERY_STRING} (\<|%3C).*script.*(\>|%3E) [NC,OR] RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) RewriteCond %{QUERY_STRING} SELECT(=|\[|\%[0-9A-Z]{0,2}) [OR] RewriteCond %{QUERY_STRING} UNION(=|\[|\%[0-9A-Z]{0,2}) [OR] RewriteCond %{QUERY_STRING} UPDATE(=|\[|\%[0-9A-Z]{0,2}) [OR] RewriteRule ^([^.]*)/?$ index.php [L] RewriteRule ^domain/trial/cms$ index/index.php?%{QUERY_STRING} [L] RewriteCond %{HTTP:Range} ([a-z]+) [NC] RewriteRule ([0-9_\-]+)flv$ http://www.domain.com [R,L] RewriteCond %{ENV:byte-ranges-specifier} !^$ RewriteRule ([0-9_\-]+)flv$ http://www.domain.com [R,L] RewriteCond %{HTTP_USER_AGENT} !^Mozilla/5 [NC] RewriteCond %{HTTP_USER_AGENT} !^Mozilla/4 [NC] RewriteCond %{HTTP_USER_AGENT} !^Opera [NC] RewriteRule ([0-9_\-]+)flv$ http://www.domain.com [R,L] RewriteRule ^$ index/index.php?%{QUERY_STRING} [L] RewriteCond %{SCRIPT_FILENAME} !sss.php [NC] RewriteCond %{SCRIPT_FILENAME} !m-administrator [NC] RewriteRule ^([^/^.]*)$ sss.php?encrypted=$1&%{QUERY_STRING} [L] RewriteCond %{SCRIPT_FILENAME} !sss.php [NC] RewriteCond %{SCRIPT_FILENAME} !m-administrator [NC] RewriteRule ^([^/^.]*)/([^/^.]*)$ sss.php?tab=$1&page=$2&%{QUERY_STRING} [L] RewriteCond %{SCRIPT_FILENAME} !sss.php [NC] RewriteCond %{SCRIPT_FILENAME} !m-administrator [NC] RewriteRule ^([^/^.]*)/([^/^.]*)/([^.]*)$ sss.php?tab=$1&page=$2&queryString=$3&%{QUERY_STRING} [L] RewriteCond %{SCRIPT_FILENAME} !sss.php [NC] RewriteCond %{SCRIPT_FILENAME} !security.php [NC] RewriteRule ^([^/]*)$ index/$1?%{QUERY_STRING} [L] I tried to convert it by online tools such as : http://www.anilcetin.com/convert-apache-htaccess-to-nginx/ but it didn't convert it correctly. The conversion output is : if ($args ~ "mosConfig_[a-zA-Z_]{1,21}(=|%3D)"){ set $rule_0 1; } if ($args ~ "base64_encode.*(.*)"){ set $rule_0 1; } if ($args ~* "(<|%3C).*script.*(>|%3E)"){ set $rule_0 1; } if ($args ~ "GLOBALS(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($args ~ "_REQUEST(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($args ~ "SELECT(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($args ~ "UNION(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($args ~ "UPDATE(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($rule_0 = "1"){ rewrite ^/([^.]*)/?$ /index.php last; } if ($rule_1 = ""){ rewrite ^/domain/trial/cms$ /index/index.php?$args last; } if ($http_range ~* "([a-z]+)"){ set $rule_2 1$rule_2; } if ($rule_2 = "1"){ rewrite /([0-9_-]+)flv$ http://www.domain.com redirect; } #ignored: condition 0 if ($rule_3 = "1"){ rewrite /([0-9_-]+)flv$ http://www.domain.com redirect; } if ($http_user_agent !~* "^Mozilla/5"){ set $rule_4 1$rule_4; } if ($http_user_agent !~* "^Mozilla/4"){ set $rule_4 2$rule_4; } if ($http_user_agent !~* "^Opera"){ set $rule_4 3$rule_4; } if ($rule_4 = "321"){ rewrite /([0-9_-]+)flv$ http://www.domain.com redirect; } if ($rule_5 = ""){ rewrite ^/$ /index/index.php?$args last; } if ($uri !~* "sss.php"){ set $rule_6 1$rule_6; } if ($uri !~* "m-administrator"){ set $rule_6 2$rule_6; } if ($rule_6 = "21"){ rewrite ^/([^/^.]*)$ /sss.php?encrypted=$1&$args last; } if ($uri !~* "sss.php"){ set $rule_7 1$rule_7; } if ($uri !~* "m-administrator"){ set $rule_7 2$rule_7; } if ($rule_7 = "21"){ rewrite ^/([^/^.]*)/([^/^.]*)$ /sss.php?tab=$1&page=$2&$args last; } if ($uri !~* "sss.php"){ set $rule_8 1$rule_8; } if ($uri !~* "m-administrator"){ set $rule_8 2$rule_8; } if ($rule_8 = "21"){ rewrite ^/([^/^.]*)/([^/^.]*)/([^.]*)$ /sss.php?tab=$1&page=$2&queryString=$3&$args last; } if ($uri !~* "sss.php"){ set $rule_9 1$rule_9; } if ($uri !~* "security.php"){ set $rule_9 2$rule_9; } if ($rule_9 = "21"){ rewrite ^/([^/]*)$ /index/$1?$args last; } Please help me with the proper conversion result for nginx in order to work perfectly.

    Read the article

  • Oracle Java ME Embedded Client 1.1????

    - by sasa
    6?26???????????Java ME????????Oracle Java ME Embedded Client (OJEC) 1.1???????????CDC 1.1.2?Foundation Profile (FP) 1.1.2???????????ARM, MIPS, x86?Linux???????????Security Optional Package, RMI, JDBC, XML API, Web Services?????????????????????????????·???????????? 2011?5???????1.0??????????????XML API???????????????????????????????????????????x86?????????????x86????????Just-in-Time (JIT)?????????????? ?????????????????????(????GUI??)??????????????Linux (x86)?JDK 6?????????????????????? CPU OS ROM RAM ARM (v5) Linux 2.6.31??, glibc 2.10.2?? 5MB?? 8MB?? ARM (v6, v7) Linux 2.6.35??, glibc 2.12.1?? 5MB?? 8MB?? MIPS (MIPS32 74K) Linux 2.6.22??, glibc 2.8?? 5MB?? 8MB?? x86 (Pentium III??) Linux 2.6.35??, glibc 2.12.1?? 5MB??  8MB?? OJEC 1.1??????????????OTN??????????????????????????????????????Java Embedded??????????? OJEC 1.1 ?????? OJEC 1.1 ??????

    Read the article

  • Windows Sharing requires password

    - by Linux Intel
    I have 3 machines on my local network Machine A , Machine B and Machine C OS on all machines is : Windows 7 64bit. Sharing Permissions on all machines : Everyone ( Read/Write ) no domain. Sharing folder name : project Machine A is sharing folder over the network without password. Machine B is sharing folder over the network without password. Machine C is sharing folder over the network without password. Machine A can normally access B and C without password required. Machine B can normally access A and C without password required Machine C can normally access Machine B without password. My problem is *Machine C* requires a password when it access Machine A also the shared folder in Machine A don't have password protected and Machine B can access Machine A without a password ! How can i solve the problem .?

    Read the article

  • 12.04 Login gone wrong

    - by Mark H
    I seem to have a fault in the login procedure somewhere. When I boooted up I found that if I selected Guest I could use the computer. If I selected my administrator account I was taken straight to the terminal. So I opened a guest session, went to user settings, and unlocked my admin account (it accepted the password!), and amended it to show "password None" and automatic login. I now find that when I boot up I am taken straight to the terminal - if I exit terminal I get the login screen - if I select the administrator login I go back to terminal - if i select guest I can use the PC, and if I select mu normal user account I can use the PC. So I cannot login as an administrator - so admin functions such as update are no longer accessible. Sorry to be so long winde but I am stuck. Can anyone suggest anything - I am a beginner with this

    Read the article

  • Fusion Middleware 11gR1 : 3??????

    - by Hiroyuki Yoshino
    2011?3? (2011/03/08 ??)?Fusion Middleware 11gR1 ?????????????? ?????????????3??????? 1. Oracle iPlanet Web Proxy Server Oracle iPlanet Web Proxy Server???????4.0.14????4.0.15????????? ???????Release Notes (??) ?????????? ?????????????????????? Platforms: AIX, HP-UX Itanium, HP-UX PA-RISC, Linux x86, Linux x86-64, Microsoft Windows (32-bit), Microsoft Windows x64, Solaris (SPARC), Other Platforms 2. Oracle Security Governer Integration Kit ???????????? Oracle Security Governor??Healthcare??????????????????????????????????????????????????????????? ?????????????????????? Platforms: AIX, HP-UX Itanium, HP-UX PA-RISC, Linux x86, Linux x86-64, Microsoft Windows (32-bit), Microsoft Windows x64, Solaris (SPARC) 3. Oracle Tuxedo Oracle Tuxedo????????????????? Oracle Tuxedo System and Application Monitor (TSAM)????(11.1.1.2.0??11.1.1.2.1)????? Oracle Tuxedo JCA Adapter????(11.1.1.2.0??11.1.1.2.1)????? Oracle Service Architecture Leveraging Tuxedo (SALT)????(11.1.1.1.0??11.1.1.2.0)????? ???????????Oracle Tuxedo Application Runtime for CICS and Batch???Oracle Tuxedo Application Rehosting Workbench? ???????????????? CICS????????????????Oracle Tuxedo???????·??????????????·?????????????????COBOL????????????????JCL??????·????????????????????????????????????CICS?????????????????????????????????? ??????????? (??)?????????? ???Oracle Tuxedo?????????????????????????? Platforms: AIX, HP-UX Itanium, Linux x86, Linux x86-64, Microsoft Windows (32-bit), Microsoft Windows x64, Solaris (SPARC), Other Platforms ???????????????

    Read the article

  • Grub 'Read Error' - Only Loads with LiveCD

    - by Ryan Sharp
    Problem After installing Ubuntu to complete my Windows 7/Ubuntu 12.04 dual-boot setup, Grub just wouldn't load at all unless I boot from the LiveCD. Afterwards, everything works completely normal. However, this workaround isn't a solution and I'd like to be able to boot without the aid of a disc. Fdisk -l Using the fdisk -l command, I am given the following: Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 * 48959486 124067839 37554177 5 Extended /dev/sda5 48959488 124067839 37554176 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1937897471 456844288 83 Linux /dev/sdb6 1937899520 1953523711 7812096 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT Bootinfoscript I've used the BootInfoScript, and received the following output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb1: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdb6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sdb3 starts at sector 200744960. But according to the info from fdisk, sdb3 starts at sector 2048. According to the info in the boot sector, sdb3 has 823461887 sectors, but according to the info from fdisk, it has 1024204799 sectors. Operating System: Boot files: sdc1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 208,896 48,957,439 48,748,544 7 NTFS / exFAT / HPFS /dev/sda3 * 48,959,486 124,067,839 75,108,354 5 Extended /dev/sda5 48,959,488 124,067,839 75,108,352 83 Linux Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 1,024,208,894 1,953,523,711 929,314,818 5 Extended /dev/sdb5 1,024,208,896 1,937,897,471 913,688,576 83 Linux /dev/sdb6 1,937,899,520 1,953,523,711 15,624,192 82 Linux swap / Solaris /dev/sdb3 * 2,048 1,024,206,847 1,024,204,800 7 NTFS / exFAT / HPFS Drive: sdc _____________________________________________________________________ Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 2,048 625,141,759 625,139,712 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 A48056DF8056B80E ntfs System Reserved /dev/sda2 A8C6D6A4C6D671D4 ntfs Windows /dev/sda5 fd71c537-3715-44e1-b1fe-07537e22b3dd ext4 /dev/sdb3 6373D03D0A3747A8 ntfs Steam /dev/sdb5 6f5a6eb3-a932-45aa-893e-045b57708270 ext4 /dev/sdb6 469848c8-867a-41b7-b0e1-b813a43c64af swap /dev/sdc1 725D7B961CF34B1B ntfs backup ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda5 / ext4 (rw,noatime,nodiratime,discard,errors=remount-ro) /dev/sdb5 /home ext4 (rw) =========================== sda5/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd set locale_dir=($root)/boot/grub/locale set lang=en_GB insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-29-generic } menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd echo 'Loading Linux 3.2.0-29-generic ...' linux /boot/vmlinuz-3.2.0-29-generic root=UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-29-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root fd71c537-3715-44e1-b1fe-07537e22b3dd linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root A48056DF8056B80E chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root A8C6D6A4C6D671D4 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda5/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=fd71c537-3715-44e1-b1fe-07537e22b3dd / ext4 noatime,nodiratime,discard,errors=remount-ro 0 1 # /home was on /dev/sdb5 during installation UUID=6f5a6eb3-a932-45aa-893e-045b57708270 /home ext4 defaults 0 2 # swap was on /dev/sdb6 during installation UUID=469848c8-867a-41b7-b0e1-b813a43c64af none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 -------------------------------------------------------------------------------- =================== sda5: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-29-generic 2 = boot/vmlinuz-3.2.0-29-generic 1 = initrd.img 2 = vmlinuz 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda3 00000000 63 6f 70 69 61 20 65 20 63 6f 6c 61 41 63 65 64 |copia e colaAced| 00000010 65 72 20 61 20 74 6f 64 6f 20 6f 20 74 65 78 74 |er a todo o text| 00000020 6f 20 66 61 6c 61 64 6f 20 75 74 69 6c 69 7a 61 |o falado utiliza| 00000030 6e 64 6f 20 61 20 63 6f 6e 76 65 72 73 c3 a3 6f |ndo a convers..o| 00000040 20 64 65 20 74 65 78 74 6f 20 70 61 72 61 20 76 | de texto para v| 00000050 6f 7a 4d 61 6e 69 70 75 6c 61 72 20 61 73 20 64 |ozManipular as d| 00000060 65 66 69 6e 69 c3 a7 c3 b5 65 73 20 71 75 65 20 |efini....es que | 00000070 63 6f 6e 74 72 6f 6c 61 6d 20 6f 20 61 63 65 73 |controlam o aces| 00000080 73 6f 20 64 65 20 57 65 62 73 69 74 65 73 20 61 |so de Websites a| 00000090 20 63 6f 6f 6b 69 65 73 2c 20 4a 61 76 61 53 63 | cookies, JavaSc| 000000a0 72 69 70 74 20 65 20 70 6c 75 67 2d 69 6e 73 4d |ript e plug-insM| 000000b0 61 6e 69 70 75 6c 61 72 20 61 73 20 64 65 66 69 |anipular as defi| 000000c0 6e 69 c3 a7 c3 b5 65 73 20 72 65 6c 61 63 69 6f |ni....es relacio| 000000d0 6e 61 64 61 73 20 63 6f 6d 20 70 72 69 76 61 63 |nadas com privac| 000000e0 69 64 61 64 65 41 63 65 64 65 72 20 61 6f 73 20 |idadeAceder aos | 000000f0 73 65 75 73 20 70 65 72 69 66 c3 a9 72 69 63 6f |seus perif..rico| 00000100 73 20 55 53 42 55 74 69 6c 69 7a 61 72 20 6f 20 |s USBUtilizar o | 00000110 73 65 75 20 6d 69 63 72 6f 66 6f 6e 65 55 74 69 |seu microfoneUti| 00000120 6c 69 7a 61 72 20 61 20 73 75 61 20 63 c3 a2 6d |lizar a sua c..m| 00000130 61 72 61 55 74 69 6c 69 7a 61 72 20 6f 20 73 65 |araUtilizar o se| 00000140 75 20 6d 69 63 72 6f 66 6f 6e 65 20 65 20 61 20 |u microfone e a | 00000150 63 c3 a2 6d 61 72 61 4e c3 a3 6f 20 66 6f 69 20 |c..maraN..o foi | 00000160 70 6f 73 73 c3 ad 76 65 6c 20 65 6e 63 6f 6e 74 |poss..vel encont| 00000170 72 61 72 20 6f 20 63 61 6d 69 6e 68 6f 20 61 62 |rar o caminho ab| 00000180 73 6f 6c 75 74 6f 20 70 61 72 61 20 6f 20 64 69 |soluto para o di| 00000190 72 65 63 74 c3 b3 72 69 6f 20 61 20 65 6d 70 61 |rect..rio a empa| 000001a0 63 6f 74 61 72 2e 4f 20 64 69 72 65 63 74 c3 b3 |cotar.O direct..| 000001b0 72 69 6f 20 64 65 20 65 6e 74 72 61 64 61 00 fe |rio de entrada..| 000001c0 ff ff 83 fe ff ff 02 00 00 00 00 10 7a 04 00 00 |............z...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in Begging / Appreciation ;) If anything else is required to solve my problem, please ask. My only hopes are that I can solve this, and that doing so won't require re-installation of Grub due to how complicated the procedures are, or that I would be needed to reinstall the OS', as I have done so about six times already since friday due to several other issues I've encountered. Thank you, and good day. System Ubuntu 12.04 64-bit / Windows 7 SP1 64-bit 64GB SSD as boot/OS drive, 1TB HDD as /Home Swap and Steam drive.

    Read the article

  • Trying to include a library, but keep getting 'undefined reference to' messages

    - by KU1
    I am attempting to use the libtommath library. I'm using the NetBeans IDE for my project on Ubuntu linux. I have downloaded and built the library, I have done a 'make install' to put the resulting .a file into /usr/lib/ and the .h files into /usr/include It appears to be finding the files appropriately (since I no longer get those errors, which I did before installing into the /usr directories). However, when I create a simple main making a call to mp_init (which is in the library), I get the following error when I attempt to make my project: mkdir -p build/Debug/GNU-Linux-x86 rm -f build/Debug/GNU-Linux-x86/main.o.d gcc -c -g -MMD -MP -MF build/Debug/GNU-Linux-x86/main.o.d -o build/Debug/GNU-Linux-x86/main.o main.c mkdir -p dist/Debug/GNU-Linux-x86 gcc -o dist/Debug/GNU-Linux-x86/cproj1 build/Debug/GNU-Linux-x86/main.o build/Debug/GNU-Linux-x86/main.o: In function 'main': /home/[[myusername]]/NetBeansProjects/CProj1/main.c:18: undefined reference to `mp_init' collect2: ld returned 1 exit status make[2]: *** [dist/Debug/GNU-Linux-x86/cproj1] Error 1 So, it looks like the linker can't find the function within the library, however it IS there, so I just don't know what could be causing this. Any help would be appreciated. I get the same error if I type the gcc command directly and skip the makefile, I also made sure the static library got compiled with gcc as well. Edited to Add: I get these same errors if I do the compile directly and add the library with -l or -L: $ gcc -l /usr/lib/libtommath.a main.c /usr/bin/ld: cannot find -l/usr/lib/libtommath.a collect2: ld returned 1 exit status $ gcc -llibtommath.a main.c /usr/bin/ld: cannot find -llibtommath.a collect2: ld returned 1 exit status $ gcc -Llibtommath.a main.c /tmp/ccOxzclw.o: In function `main': main.c:(.text+0x18): undefined reference to `mp_init' collect2: ld returned 1 exit status $ gcc -Llibtommath.a main.c /tmp/ccOxzclw.o: In function `main': main.c:(.text+0x18): undefined reference to `mp_init' collect2: ld returned 1 exit status I am very rusty on this stuff, so I'm not sure I'm using the right command here, in the -L examples are the libraries being found? If the library isn't being found how on earth do I get it to find the library? It's in /usr/lib, I've tried it with the .a file in the current directory, etc. Is there an environment variable I need to set? If so, how, etc. Thanks so much for the help. I've tried a completely different library (GMP) and had the EXACT same problem. This has got to be some kind of Ubuntu environment issue? Anyone have any idea how to fix this?

    Read the article

  • How do I get an Enter USB TV Box TV tuner aka Gadmei UTV302 to work?

    - by Subhash
    Has anyone had any success in using the Enter USB TV Box from Enter Multimedia? It comes bundled with software that works in Windows. I have had no luck using it in Ubuntu 10.10. Update 1 Here is the output from lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 004 Device 002: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 1f71:3301 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I can't find the Enter USB TV Box listed in this. In the dmesg tail command, I found something that seems to be related to the card: usb 1-5: new high speed USB device using ehci_hcd and address 6 usb 1-5: config 1 interface 0 altsetting 1 bulk endpoint 0x83 has invalid maxpacket 256 Update 2 From Windows I learned that this USB TV tuner uses some chipset from Gadmei corporation. All computer stores in India sell Enter USB TV Box if you ask for an USB TV tuner. No other brand seems to be interested in this market. Update 3 I learned that this TV tuner is rebranded version of Gadmei UTV302 (USB TV Tuner Box). Update 4 I tried adding em28xx as the chipset (as suggested by user BOBBO below) for the tuner but that did not work. I went back to my Pinnacle PCTV internal card. I don't think the tuner referred by UbuntuForums (Gadmei UTV 330) and the tuner that I have (Gadmei UTV 302) are the same. My USB tuner is several times bigger. My tuner seems to be a newer device with a newer tuner chip. I will submit details of this device to the LinuxTV developers this weekend. Update 5 I opened the tuner box and found that it uses a tuner from a Chinese company - Tenas. Model is TNF 8022-DFA. Update 6 Tuner chip specs (retrived from supplier directory) for Tenas TNF 8022-DFA. Supply voltage: true 5V device(low power dissipation) Control system: I2C bus control of tuning, address selection Tuning system: PLL controlled tuning Receiving system: system PAL D/K,IF(Intermediate Frequency): 38MHz Receiving channels: full frequency range from channel DS1 (49.75MHz) to channel DS57 (863.25MHz); Use Texas Instruments SN761678 IC solution, with mini install size Update 7 Reverse side of the circuit board. Picture of the TV tuner

    Read the article

  • gcc segmentation fault on Ubuntu 12.04

    - by Yuval F
    I am trying to compile a C program on Ubuntu precise 12.04. Here's the program: #include <stdio.h> int main(int argc, char** argv) { printf("Hello World!"); return 0; } My gcc version is 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5). Initially it did not find cc1 so I added a soft link. Now I get this message when I try to compile: gcc: internal compiler error: Segmentation fault (program cc1) Compiling the same program with g++ works fine. I tried reinstalling build-essential, but to no avail. What am I missing? EDIT: I tried reinstalling according to @gertyvdijk's suggestion. As it did not help, here is the output of apt-cache policy gcc-4.6: gcc-4.6: Installed: 4.6.3-1ubuntu5 Candidate: 4.6.3-1ubuntu5 Version table: *** 4.6.3-1ubuntu5 0 500 http://il.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages 100 /var/lib/dpkg/status and the output of ls -l /usr/bin/gcc: lrwxrwxrwx 1 root root 7 Mar 13 2012 /usr/bin/gcc -> gcc-4.6 EDIT #2: here's a verbose compiler output: gcc -v aaa.c Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.6/lto-wrapper Target: x86_64-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.6.3-1ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.6/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.6 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.6 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) COLLECT_GCC_OPTIONS='-v' '-mtune=generic' '-march=x86-64' /usr/lib/gcc/x86_64-linux-gnu/4.6/cc1 -quiet -v -imultilib . -imultiarch x86_64-linux-gnu aaa.c -quiet -dumpbase aaa.c -mtune=generic -march=x86-64 -auxbase aaa -version -fstack-protector -o /tmp/ccHfcXMs.s gcc: internal compiler error: Segmentation fault (program cc1) Please submit a full bug report, with preprocessed source if appropriate. See <file:///usr/share/doc/gcc-4.6/README.Bugs> for instructions.

    Read the article

  • How to repair an external harddrive?

    - by dodohjk
    I would like to reformat my hard disk, and if possible recover the (somewhat unimportant) contents if possible. I have a Western Digital 1TB hard drive which had a NTFS partition. I unplugged the drive without safely removing it first. At first a pop up was asking me to use a Windows OS to run the chkdsk /f command, however, in the effort to keep using a Linux OS I used the ntfsfix command on the ubuntu terminal Now, when I try to access the hard drive, it doesn't show up anymore in Nautilus. I tried reformatting it using Disk Utility, but it gives me an error message, and Gparted would hang on the "Scanning devices" step infinitely. Please comment any output that you would like to see and I will add it to my question. EDIT disk utility tells me is on /dev/sdb the command sudo fdisk -l gives dodohjk@DodosPC:~$ sudo fdisk -l [sudo] password for dodohjk: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006fa8c Device Boot Start End Blocks Id System /dev/sda1 * 4094 482344959 241170433 5 Extended /dev/sda2 482344960 488396799 3025920 82 Linux swap / Solaris /dev/sda5 4096 31461127 15728516 83 Linux /dev/sda6 31463424 52434943 10485760 83 Linux /dev/sda7 52436992 62923320 5243164+ 83 Linux /dev/sda8 62924800 482344959 209710080 83 Linux Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6e697373 This doesn't look like a partition table Probably you selected the wrong device. Device Boot Start End Blocks Id System /dev/sdb1 ? 1936269394 3772285809 918008208 4f QNX4.x 3rd part /dev/sdb2 ? 1917848077 2462285169 272218546+ 73 Unknown /dev/sdb3 ? 1818575915 2362751050 272087568 2b Unknown /dev/sdb4 ? 2844524554 2844579527 27487 61 SpeedStor Partition table entries are not in disk order I wrote something wrong here, however here the output of fsck /dev/sbd is dodohjk@DodosPC:~$ sudo fsck /dev/sdb fsck from util-linux 2.20.1 e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device&gt;

    Read the article

  • Survey results: Open source developer preferences

    We recently conducted a survey of open source developers to learn about their current preferences around hosting sites and source control systems.  The survey was primarily advertised via Twitter, and we tried to avoid pushing the survey among audiences that would be specifically oriented towards a particular site (for example we did not advertise the survey from the CodePlex twitter account). In total there were just under 500 responses, so a reasonable sample size although not necessarily enough to guarantee fully representative results.  One of the survey questions was what is your preferred operating system for development, and looking at the results they are particularly interesting when split by operating system preference because of how significant the difference is:   Table 1 - Preferences by what is preferred operating system for development   As you can see, the preferences among developers which prefer Windows is very different from Linux and Mac oriented developers.  Again, the question was on what operating system they prefer to use for development, and didn’t ask what type of applications they create, so presumably many create things like websites which are cross-platform from a user perspective regardless of the operating system they prefer developing with. For hosting site preference, CodePlex and GitHub are roughly tied for first place among Windows developers and combined are preferred by over 75%.  However with Linux and Mac developers, GitHub has a runaway lead over the other sites.  Perhaps not particularly surprising, CodePlex has negligible mindshare among Linux and Mac developers.  It is somewhat surprising how low SourceForge and Google Code are given historically they used to rank much higher. Looking at version control preferences is also interesting.  Among Windows developers TFS, Mercurial, Subversion, and Git all have a sizable following.  While for Linux and Mac developers it is almost all Git and Mercurial, with Git having a substantial lead.  Git is generally considered to run better on Linux and have more of a Unix feel, so not really surprising to see it more popular there compared to Windows developers.  It is surprising how low Subversion has dropped since it was the dominant preference not long ago for open source developers.  Around a quarter of Windows developers still prefer Subversion, but Linux and Mac developers have largely abandoned it.  The trend towards distributed version control systems (e.g. Mercurial and Git) is strong, with over 50% of Windows developers now prefer DVCS, and over 80% of Linux and Mac developers.

    Read the article

  • Error while removing the new kernel 2.6.37

    - by Tarek
    Hi! I tried to install the new kernel but something went wrong and I'm trying to remove it now. The error massege is: mhd@Tarek-Laptop:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: linux-image-2.6.37-020637-generic 0 upgraded, 0 newly installed, 1 to remove and 9 not upgraded. 1 not fully installed or removed. After this operation, 111MB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 188780 files and directories currently installed.) Removing linux-image-2.6.37-020637-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.37-020637-generic /boot/vmlinuz-2.6.37-020637-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 2.6.37-020637-generic /boot/vmlinuz-2.6.37-020637-generic /etc/default/grub: 33: Syntax error: EOF in backquote substitution run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 2 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-2.6.37-020637-generic.postrm line 328. dpkg: error processing linux-image-2.6.37-020637-generic (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: linux-image-2.6.37-020637-generic E: Sub-process /usr/bin/dpkg returned an error code (1) The previous unsloved error is on this bug. This is my grub configuration file: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` RUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1024x768-24,mtrr=3,scroll=ywrap" video=uvesafb:mode_option=>>1024x768-24<<,mtrr=3,scroll=ywrap" GRUB_CMDLINE_LINUX=" vga=792 splash" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' GRUB_GFXMODE=1024x768-24 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_LINUX_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" thank you for answering.

    Read the article

< Previous Page | 570 571 572 573 574 575 576 577 578 579 580 581  | Next Page >