Search Results

Search found 15665 results on 627 pages for 'inno setup'.

Page 575/627 | < Previous Page | 571 572 573 574 575 576 577 578 579 580 581 582  | Next Page >

• AS11 Oracle B2B Sync Support - Series 2

  - by sinkarbabu.kirubanithi

  In the earlier series, we discussed about how to model "Sync Support" in Oracle B2B. And, we haven't discussed how the response can be consumed synchronously by the back-end application or initiator of sync request. In this sequel, we will see how we can extend it to the SOA composite applications to model the end-to-end usecase, this would help the initiator of sync request to receive the response synchronously. Series 2 - is little lengthier for blog standards so be prepared before you continue further :). Let's start our discussion with a high-level scenario where one need to initiate a synchronous request and get response synchronously. There are various approaches available, we will see one simplest approach here. Components Involved: 1. Oracle B2B 2. Oracle JCA JMS Adapter 3. Oracle BPEL 4. All of the above are wrapped up in a single SOA composite application. Oracle B2B: Skipping the "Sync Support" setup part in B2B, as we have already discussed that in the earlier series 1. Here we have provided "Sync Support" samples that can be imported to B2B directly and users can start testing the same in few minutes. Initiator Sample: This requires two JMS queues to be created, one for B2B to receive initial outbound sync request and the other is for B2B to deliver the incoming sync response to the back-end. Please enable "Use JMS Id" option in both internal listening and delivery channels. This would enable JCA JMS Adapter to correlate the initial B2B request and response and in turn it would be returned as synchronous response of BPEL. Internal Listening Channel Image: Internal Delivery Channel Image: To get going without much challenges, just create queues in Weblogic with the JNDI mentioned in the above two screenshots. If you want to use different names, then you may have to change the queue jndi names in sample after importing it into B2B. Here are the Queue related JNDI names used in the sample, 1. Internal Listening Channel Queue details, Name: JNDI Name: jms/b2b/syncreplyqueue 2. Internal Delivery Channel Queue details, Name: JNDI Name: jms/b2b/syncrequestqueue Here is the Initiator Sample Acme.zip Note: You may have to adjust the ip address of GlobalChips endpoint in the Delivery Channel. Responder Sample: Contains B2B meta-data and the Callout. Just import the sample and place the callout binary under "/tmp/callout" directory. If you choose to use a different location for callout, then you may have to change the same in B2B Configuration after importing the sample. Here are the artifacts, 1. Callout Source SampleCallout.java 2. Callout Binary sample-callout.jar 3. Responder Sample GlobalChips.zip Callout Details: Just gives the static response XML that needs to be sent back as response for the inbound sync request. For a sample purpose, we have given static response but in production you may have to invoke a web service or something similar to get the response. IMPORTANT NOTE: For Sync Support use case, responder is not expected to deliver the inbound sync request to backend as the process of delivering and getting the response from backend are expected from the Callout. This default behavior can be overridden by enabling the config property "b2b.SyncAppDelivery=true" in B2B config mbean (b2b-config.xml). This makes B2B to deliver the inbound sync request to be delivered to backend queue but the response to be sent to remote caller still has to come from Callout. 2. Oracle JCA JMS Adapter: On the initiator side, we have used JCA JMS Request/Reply pattern to send/receive the synchronous message from B2B. 3. Oracle BPEL: Exposes WS-SOAP Endpoint that takes payload as input and passes the same to B2B and returns the synchronous response of B2B as SOAP response. For outside world, it looks as if it is the synchronous web service endpoint but under the cover it uses JMS to trigger/initiate B2B to send and receive the synchronous response. 4. Composite application: All the components discussed above are wired in SOA composite application that helps to model a end-to-end synchronous use case. Here's the composite application sca_B2BSyncSample_rev1.0.jar, you may just deploy this to your AS11 SOA to make use of it. For any editing, you can just import the project in your JDEV under any SOA Application. Here are the composite application screenshots, Composite Application: BPEL With JCA JMS Adapter (Request/Reply):

  Read the article

• F# for the C# Programmer

  - by mbcrump

  Are you a C# Programmer and can’t make it past a day without seeing or hearing someone mention F#?  Today, I’m going to walk you through your first F# application and give you a brief introduction to the language. Sit back this will only take about 20 minutes. Introduction Microsoft's F# programming language is a functional language for the .NET framework that was originally developed at Microsoft Research Cambridge by Don Syme. In October 2007, the senior vice president of the developer division at Microsoft announced that F# was being officially productized to become a fully supported .NET language and professional developers were hired to create a team of around ten people to build the product version. In September 2008, Microsoft released the first Community Technology Preview (CTP), an official beta release, of the F# distribution . In December 2008, Microsoft announced that the success of this CTP had encouraged them to escalate F# and it is now will now be shipped as one of the core languages in Visual Studio 2010 , alongside C++, C# 4.0 and VB. The F# programming language incorporates many state-of-the-art features from programming language research and ossifies them in an industrial strength implementation that promises to revolutionize interactive, parallel and concurrent programming. Advantages of F# F# is the world's first language to combine all of the following features: Type inference: types are inferred by the compiler and generic definitions are created automatically. Algebraic data types: a succinct way to represent trees. Pattern matching: a comprehensible and efficient way to dissect data structures. Active patterns: pattern matching over foreign data structures. Interactive sessions: as easy to use as Python and Mathematica. High performance JIT compilation to native code: as fast as C#. Rich data structures: lists and arrays built into the language with syntactic support. Functional programming: first-class functions and tail calls. Expressive static type system: finds bugs during compilation and provides machine-verified documentation. Sequence expressions: interrogate huge data sets efficiently. Asynchronous workflows: syntactic support for monadic style concurrent programming with cancellations. Industrial-strength IDE support: multithreaded debugging, and graphical throwback of inferred types and documentation. Commerce friendly design and a viable commercial market. Lets try a short program in C# then F# to understand the differences. Using C#: Create a variable and output the value to the console window: Sample Program. using System;   namespace ConsoleApplication9 {     class Program     {         static void Main(string[] args)         {             var a = 2;             Console.WriteLine(a);             Console.ReadLine();         }     } } A breeze right? 14 Lines of code. We could have condensed it a bit by removing the “using” statment and tossing the namespace. But this is the typical C# program. Using F#: Create a variable and output the value to the console window: To start, open Visual Studio 2010 or Visual Studio 2008. Note: If using VS2008, then please download the SDK first before getting started. If you are using VS2010 then you are already setup and ready to go. So, click File-> New Project –> Other Languages –> Visual F# –> Windows –> F# Application. You will get the screen below. Go ahead and enter a name and click OK. Now, you will notice that the Solution Explorer contains the following: Double click the Program.fs and enter the following information. Hit F5 and it should run successfully. Sample Program. open System let a = 2        Console.WriteLine a As Shown below: Hmm, what? F# did the same thing in 3 lines of code. Show me the interactive evaluation that I keep hearing about. The F# development environment for Visual Studio 2010 provides two different modes of execution for F# code: Batch compilation to a .NET executable or DLL. (This was accomplished above). Interactive evaluation. (Demo is below) The interactive session provides a > prompt, requires a double semicolon ;; identifier at the end of a code snippet to force evaluation, and returns the names (if any) and types of resulting definitions and values. To access the F# prompt, in VS2010 Goto View –> Other Window then F# Interactive. Once you have the interactive window type in the following expression: 2+3;; as shown in the screenshot below: I hope this guide helps you get started with the language, please check out the following books for further information. F# Books for further reading   Foundations of F# Author: Robert Pickering An introduction to functional programming with F#. Including many samples, this book walks through the features of the F# language and libraries, and covers many of the .NET Framework features which can be leveraged with F#.       Functional Programming for the Real World: With Examples in F# and C# Authors: Tomas Petricek and Jon Skeet An introduction to functional programming for existing C# developers written by Tomas Petricek and Jon Skeet. This book explains the core principles using both C# and F#, shows how to use functional ideas when designing .NET applications and presents practical examples such as design of domain specific language, development of multi-core applications and programming of reactive applications.

  Read the article

• International Radio Operators Alphabet in F# &amp; Silverlight &ndash; Part 2

  - by MarkPearl

  So the brunt of my my very complex F# code has been done. Now it’s just putting the Silverlight stuff in. The first thing I did was add a new project to my solution. I gave it a name and VS2010 did the rest of the magic in creating the .Web project etc. In this instance because I want to take the MVVM approach and make use of commanding I have decided to make the frontend a Silverlight4 project. I now need move my F# code into a proper Silverlight Library. Warning – when you create the Silverlight Library VS2010 will ask you whether you want it to be based on Silverlight3 or Silverlight4. I originally went for Silverlight4 only to discover when I tried to compile my solution that I was given an error… Error 12 F# runtime for Silverlight version v4.0 is not installed. Please go to http://go.microsoft.com/fwlink/?LinkId=177463 to download and install matching.. After asking around I discovered that the Silverlight4 F# runtime is not available yet. No problem, the suggestion was to change the F# Silverlight Library to a Silverlight3 project however when going to the properties of the project file – even though I changed it to Silverlight3, VS2010 did not like it and kept reverting it to a Silverlight4 project. After a few minutes of scratching my head I simply deleted Silverlight4 F# Library project and created a new F# Silverlight Library project in Silverlight3 and VS2010 was happy. Now that the project structure is set up, rest is fairly simple. You need to add the Silverlight Library as a reference to the C# Silverlight Front End. Then setup your views, since I was following the MVVM pattern I made a Views & ViewModel folder and set up the relevant View and ViewModels. The MainPageViewModel file looks as follows using System; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Ink; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Collections.ObjectModel; namespace IROAFrontEnd.ViewModels { public class MainPageViewModel : ViewModelBase { private string _iroaString; private string _inputCharacters; public string InputCharacters { get { return _inputCharacters; } set { if (_inputCharacters != value) { _inputCharacters = value; OnPropertyChanged("InputCharacters"); } } } public string IROAString { get { return _iroaString; } set { if (_iroaString != value) { _iroaString = value; OnPropertyChanged("IROAString"); } } } public ICommand MySpecialCommand { get { return new MyCommand(this); } } public class MyCommand : ICommand { readonly MainPageViewModel _myViewModel; public MyCommand(MainPageViewModel myViewModel) { _myViewModel = myViewModel; } public event EventHandler CanExecuteChanged; public bool CanExecute(object parameter) { return true; } public void Execute(object parameter) { var result = ModuleMain.ConvertCharsToStrings(_myViewModel.InputCharacters); var newString = ""; foreach (var Item in result) { newString += Item + " "; } _myViewModel.IROAString = newString.Trim(); } } } } One of the features I like in Silverlight4 is the new commanding. You will notice in my I have put the code under the command execute to reference to my F# module. At the moment this could be cleaned up even more, but will suffice for now.. public void Execute(object parameter) { var result = ModuleMain.ConvertCharsToStrings(_myViewModel.InputCharacters); var newString = ""; foreach (var Item in result) { newString += Item + " "; } _myViewModel.IROAString = newString.Trim(); } I then needed to set the view up. If we have a look at the MainPageView.xaml the xaml code will look like the following…. Nothing to fancy, but battleship grey for now… take careful note of the binding of the command in the button to MySpecialCommand which was created in the ViewModel. <UserControl x:Class="IROAFrontEnd.Views.MainPageView" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400"> <Grid x:Name="LayoutRoot" Background="White"> <Grid.RowDefinitions> <RowDefinition/> <RowDefinition/> <RowDefinition/> </Grid.RowDefinitions> <TextBox Grid.Row="0" Text="{Binding InputCharacters, Mode=TwoWay}"/> <Button Grid.Row="1" Command="{Binding MySpecialCommand}"> <TextBlock Text="Generate"/> </Button> <TextBlock Grid.Row="2" Text="{Binding IROAString}"/> </Grid> </UserControl> Finally in the App.xaml.cs file we need to set the View and link it to the ViewModel. private void Application_Startup(object sender, StartupEventArgs e) { var myView = new MainPageView(); var myViewModel = new MainPageViewModel(); myView.DataContext = myViewModel; this.RootVisual = myView; }   Once this is done – hey presto – it worked. I typed in some “Test Input” and clicked the generate button and the correct Radio Operators Alphabet was generated. And that’s the end of my first very basic F# Silverlight application.

  Read the article

• SQL Saturday 43 in Redmond

  - by AjarnMark

  I attended my first SQLSaturday a couple of days ago, SQLSaturday #43 in Redmond (at Microsoft).  I got there really early, primarily because I forgot how fast I can get there from my home when nobody else is on the road.  On a weekday in rush hour traffic, that would have taken two hours to get there.  I gave myself 90 minutes, and actually got there in about 45.  Crazy! I made the mistake of going to the main Microsoft campus, but that’s not where the event was being held.  Instead it was in a big Microsoft conference center on the other side of the highway.  Fortunately, I had the address with me and quickly realized my mistake.  When I got back on track, I noticed that there were bright yellow signs out on the street corner that looked like they said they were for SOL Saturday, which actually was appropriate since it was the sunniest day around here in a long time. Since I was there so early, the registration was just getting setup, so I found Greg Larsen who was coordinating things and offered to help.  He put me to work with a group of people organizing the pre-printed raffle tickets and stuffing swag bags. I had never been to a SQLSaturday before this one, so I wasn’t exactly sure what to expect even though I have read about a few on some blogs.  It makes sense that each one will be a little bit different since they are almost completely volunteer driven, and the whole concept is still in its early stages.  I have been to the PASS Summit for the last several years, and was hoping for a smaller version of that.  Now, it’s not really fair to compare one free day of training run entirely by volunteers with a multi-day, $1,000+ event put on under the direction of a professional event management company.  But there are some parallels. At this SQLSaturday, there was no opening general session, just coffee and pastries in the common area / expo hallway and straight into the first group of sessions.  I don’t know if that was because there was no single room large enough to hold everyone, or for other reasons.  This worked out okay, but the organization guy in me would have preferred to have even a 15 minute welcome message from the organizers with a little overview of the day.  Even something as simple as, “Thanks to persons X, Y, and Z for helping put this together…Sessions will start in 20 minutes and are all in rooms down this hallway…the bathrooms are on the other side of the conference center…lunch today is pizza and we would like to thank sponsor Q for providing it.”  It doesn’t need to be much, certainly not a full-blown Keynote like at the PASS Summit, but something to use as a rallying point to pull everyone together and get the day off to an official start would be nice.  Again, there may have been logistical reasons why that was not feasible here.  I’m just putting out my thoughts for other SQLSaturday coordinators to consider. The event overall was great.  I believe that there were over 300 in attendance, and everything seemed to run smoothly.  At least from an attendee’s point of view where there was plenty of muffins in the morning and pizza in the afternoon, with plenty of pop to drink.  And hey, if you’ve got the food and drink covered, a lot of other stuff could go wrong and people will be very forgiving.  But as I said, everything appeared to run pretty smoothly, at least until Buck Woody showed up in his Oracle shirt.  Other than that, the volunteers did a great job! I was a little surprised by how few people in my own backyard that I know.  It makes sense if you really think about it, given how many companies must be using SQL Server around here.  I guess I just got spoiled coming into the PASS Summit with a few contacts that I already knew would be there.  Perhaps I have been spending too much time with too few people at the Summits and I need to step out and meet more folks.  Of course, it also is different since the Summit is the big national event and a number of the folks I know are spread out across the country, so the Summit is the only time we’re all in the same place at the same time.  I did make a few new contacts at SQLSaturday, and bumped into a couple of people that I knew (and a couple others that I only knew from Twitter, and didn’t even realize that they were here in the area). Other than the sheer entertainment value of Buck Woody’s session, the one that was probably the greatest value for me was a quick introduction to PowerShell.  I have not done anything with it yet, but I think it will be a good tool to use to implement my plans for automated database recovery testing.  I saw just enough at the session to take away some of the intimidation factor, and I am getting ready to jump in and see what I can put together in the next few weeks.  And that right there made the investment worthwhile.  So I encourage you, if you have the opportunity to go to a SQLSaturday event near you, go for it!

  Read the article

• Fusion HCM SaaS – Integration

  - by Kiran Mundy

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Fusion HCM SaaS – Integration A typical implementation pattern we’re seeing with Fusion Apps early adopters is implementing a few Fusion HCM applications that bring the most benefit to their company with the least disruption to existing programs and interfaces. Very often this ends up being Fusion Goals & Performance, Talent, Compensation or Benefits, often with Taleo for recruiting. The implementation picture looks like what you see below: Here, you can see that all the “downstream integrations” from the On-Premise Core HR, are unaffected because the master for employee data is still your On-Premise Core HR system – all updates and new hires are made here (although they may be fed in from Taleo to start with). As a second phase when customers migrate Core HR to Fusion HCM, they have to come up with a strategy to manage integrations to all their downstream applications that require employee details. For customers coming from EBS HR, a short term strategy that allows for minimal impact, is to extract employee data from Fusion (Via HCM Extract), and load the shared EBS HR tables (which are part of an EBS Financials install anyways), and let your downstream integrations continue to function based on this data as shown below. If you are not coming from EBS HR and there are license implications, you may want to consider: Creating an On-Premise warehouse for extracting data from Fusion Apps. Leveraging Fusion Apps Web Services (available to SaaS customers starting R7) to directly retrieve/write data to Fusion Apps. Integration Tools File Based Loader This is the primary mechanism for loading HCM data (both initial load and incremental updates) into Fusion HCM. Employee & related data can be uploaded into Fusion HCM using File Based Loader. Note that ability to schedule File Based Loader to run on a pre-defined schedule will be available as a patch on top of Rel 5. Hr2Hr has been deprecated in favor of File Based Loader, but for existing customers using Hr2Hr, here are some sample scripts that show how to get more informative error messages. They can be run by creating data model sql queries in BI Publisher. The scripts currently have hard coded values for request id and loader batch id, which your developer will need to update to the correct values for you. The BI Publisher Training Session recorded on Apr 18th is available here (under "Recordings"). This will enable a somewhat technical resource to create a data model sql query. Links to Documentation & Traning Reference documentation for File Based Loader on docs.oracle.com FBL 1.1 MOS Doc Id 1533860.1 Sample demo data files for File Based Loader HCM SaaS Integrations ppt and recording. EBS api's Loading Information into EBS Full or Shared HCM This could be candidate information being loaded from Taleo into EBS or  Employee information being loaded from Fusion HCM into an EBS shared HR install (for downstream applications & EBS Financials). Oracle HRMS Product Family Publicly Callable Business Process APIs (A Reference Consolidation) [ID 216838.1] This is a guide to the EBS R12 Integration Repository accessible from an EBS instance. EBS HRMS Publicly Callable Business Process APIs in Release 11i & 12 [ID 121964.1] Fusion HCM Extract Fusion HCM Extract is the primary mechanism used to extract employee information from Fusion HCM. Refer to the "Configure Identity Sync" doc on MOS  for additional mechanisms. Additional documentation (you'll need an oracle.com account to access) HCM Extracts User Guides (Rel 4 & 5) HCM Extract Entity/Attributes (Rel 5) HCM Extract User Guide (Rel 5) If you don’t have an oracle.com account, download the zipped HCM Extract Rel 5 Docs (Click on File --> Download on next screen). View Training Recordings on Fusion HCM Extract Benefits Extract To setup the benefits extract, refer to the following guide. Page 2-15 of the User Documentation describes how to use the benefits extract. Benefit enrollments can also be uploaded into Fusion Benefits. Instructions are here along with a sample upload file. However, if the defined benefits extract does not meet your requirements, you can use BI Publisher (Link to BI Publisher presentation recording from Apr 18th) to create your own version of Benefits extract. You can start with the data model query underlying the benefits extract. Payroll Interface Fusion Payroll Interface enables you to capture personal payroll information, such as earnings and deductions, along with other data from Oracle Fusion Human Capital Management, and send that information to a third-party payroll provider. Documentation: Payroll interface guide Sample file DBI's used for the payroll interface.Usage Patterns always accessible @ http://www.finapps.com Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

  Read the article

• using Unity Android In a sub view and add actionbar and style

  - by aeroxr1

  I exported a simple animation from Unity3D (version 4.5) in android project. With eclipse I modified the manifest and added another activity. In this activity I put a button that it makes start the animation,and this is the result. The action bar appear in the main activity but it doesn't in the unity's activity :( How can I add the action bar and the style of the first activity to unity's animation activity ? This is the unity's activity's code : package com.rabidgremlin.tut.redcube; import android.app.NativeActivity; import android.content.res.Configuration; import android.graphics.PixelFormat; import android.os.Bundle; import android.view.KeyEvent; import android.view.MotionEvent; import android.view.View; import android.view.ViewGroup; import android.view.Window; import android.view.WindowManager; import com.unity3d.player.UnityPlayer; public class UnityPlayerNativeActivity extends NativeActivity { protected UnityPlayer mUnityPlayer; // don't change the name of this variable; referenced from native code // Setup activity layout @Override protected void onCreate (Bundle savedInstanceState) { //requestWindowFeature(Window.FEATURE_NO_TITLE); super.onCreate(savedInstanceState); getWindow().takeSurface(null); //setTheme(android.R.style.Theme_NoTitleBar_Fullscreen); getWindow().setFormat(PixelFormat.RGB_565); mUnityPlayer = new UnityPlayer(this); /*if (mUnityPlayer.getSettings ().getBoolean ("hide_status_bar", true)) getWindow ().setFlags (WindowManager.LayoutParams.FLAG_FULLSCREEN, WindowManager.LayoutParams.FLAG_FULLSCREEN); */ setContentView(mUnityPlayer); mUnityPlayer.requestFocus(); } // Quit Unity @Override protected void onDestroy () { mUnityPlayer.quit(); super.onDestroy(); } // Pause Unity @Override protected void onPause() { super.onPause(); mUnityPlayer.pause(); } // eliminiamo questa onResume() e proviamo a modificare la onResume() // Resume Unity @Override protected void onResume() { super.onResume(); mUnityPlayer.resume(); } // inseriamo qualche modifica qui // This ensures the layout will be correct. @Override public void onConfigurationChanged(Configuration newConfig) { super.onConfigurationChanged(newConfig); mUnityPlayer.configurationChanged(newConfig); } // Notify Unity of the focus change. @Override public void onWindowFocusChanged(boolean hasFocus) { super.onWindowFocusChanged(hasFocus); mUnityPlayer.windowFocusChanged(hasFocus); } // For some reason the multiple keyevent type is not supported by the ndk. // Force event injection by overriding dispatchKeyEvent(). @Override public boolean dispatchKeyEvent(KeyEvent event) { if (event.getAction() == KeyEvent.ACTION_MULTIPLE) return mUnityPlayer.injectEvent(event); return super.dispatchKeyEvent(event); } // Pass any events not handled by (unfocused) views straight to UnityPlayer @Override public boolean onKeyUp(int keyCode, KeyEvent event) { return mUnityPlayer.injectEvent(event); } @Override public boolean onKeyDown(int keyCode, KeyEvent event) { return mUnityPlayer.injectEvent(event); } @Override public boolean onTouchEvent(MotionEvent event) { return mUnityPlayer.injectEvent(event); } /*API12*/ public boolean onGenericMotionEvent(MotionEvent event) { return mUnityPlayer.injectEvent(event); } } And this is the AndroidManifest.xml android:versionCode="1" android:versionName="1.0" > <!-- android:theme="@android:style/Theme.NoTitleBar"--> <supports-screens android:anyDensity="true" android:largeScreens="true" android:normalScreens="true" android:smallScreens="true" android:xlargeScreens="true" /> <application android:icon="@drawable/app_icon" android:label="@string/app_name" android:theme="@android:style/Theme.Holo.Light" > <activity android:name="com.rabidgremlin.tut.redcube.UnityPlayerNativeActivity" android:configChanges="mcc|mnc|locale|touchscreen|keyboard|keyboardHidden|navigation|orientation|screenLayout|uiMode|screenSize|smallestScreenSize|fontScale" android:label="@string/app_name" android:screenOrientation="portrait" > <!--android:launchMode="singleTask"--> <meta-data android:name="unityplayer.UnityActivity" android:value="true" /> <meta-data android:name="unityplayer.ForwardNativeEventsToDalvik" android:value="false" /> </activity> <activity android:name="com.rabidgremlin.tut.redcube.MainActivity" android:label="@string/title_activity_main" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> </application> <uses-sdk android:minSdkVersion="17" android:targetSdkVersion="19" /> <uses-feature android:glEsVersion="0x00020000" /> </manifest>

  Read the article

• Five Reasons to Attend PLM Summit 2013: The Conference Formerly Known as AGILITY

  - by Terri Hiskey

  As we approach the end of 2012, we are also closing in on the last couple of weeks that Agile customers and prospects can register for the upcoming PLM Summit 2013 for the bargain early bird rate of $195. Register now to secure your spot! The Conference Formerly Known as AGILITY... Long-time Agile customers may remember AGILITY, which was Agile's PLM customer conference that was held on an annual basis prior to Oracle's acquisiton of Agile in 2007. In February 2012, due to feedback we received from our Agile PLM community, we successfully resurrected the AGILITY conference and renamed it the PLM Summit. The PLM Summit was so well received and well-attended, that we are doing it again in 2013. This upcoming PLM Summit is being co-located in San Francisco under the overarching banner of the Oracle Value Chain Summit, and will be held alongside several other Oracle customer conferences that cover a range of value chain solutions, including Value Chain Planning, Value Chain Execution, Procurement, Maintenance and Manufacturing. This setup offers PLM attendees the best of all worlds--the opportunity to participate and learn about PLM in smaller, focused sessions by product and by industry, while also giving attendees the chance to see how PLM works together with other critical enterprise applications that address other important aspects of the value chain. Top Five Reasons to Attend the PLM Summit 2013 In the spirit of all of the end-of-the-year lists that are currently popping up, here is a list of the top five reasons to attend the PLM Summit for anyone out there needs a little extra encouragement to register: 1. The Best Opportunities for Customer Networking   The PLM Summit offers attendees numerous opportunities to learn and network with fellow Agile users. Customer stories are featured in keynote and breakout presentations and the schedule allows for plenty of networking time during breakfasts, lunches, breaks and dinners. Customer networking is the number one reason that Agile users attend the PLM Summit. Read what attendees thought of the most recent PLM Summit: "Hearing about the implementation of Agile products from a customers’ perspective is invaluable." - Director of Quality Assurance & Regulatory Affairs, leading medical device manufacturer "Understanding the scope of other companies’ projects and the lessons learned made attending this event well worth my time." - Director of Test Engineering, global industrial manufacturer "The most beneficial thing about attending this event is the opportunity to network with other customers with similar experiences." - Director of Business Process Improvement, leading high technology company Come to the PLM Summit and play an active role within the PLM community: swap war stories and business cards, connect on LinkedIn and Facebook, share your stories and discuss the sessions from each day. Register now! 2. It's Educational! The PLM Summit is the premier educational event for anyone in the Agile PLM community. There are nearly 40 PLM-focused in-depth educational sessions led by Agile PLM experts, customers and partners that will cover a range of specific product and industry-focused topics. Keynotes will give attendees a broad overview of the entire Agile PLM footprint, while sessions will delve deeply into specific product functionality and customer case studies. There is truly something for everyone. Check out the latest agenda for view of all the sessions. 3. Visit with the PLM Partner Community Our partners play a significant and important role within the Agile PLM community. At the PLM Summit, attendees will be able to meet and mingle with several of the top Oracle Agile PLM partners including: Deloitte, Domain, GoEngineer, Hitachi Consulting, IBM, Kalypso, KPIT Cummins (CPG Solutions), Perception Software, Verdant, Xavor and ZeroWaitState. Go here for a complete list of all the Value Chain Summit sponsors. 4. See Agile PLM in Action at our Dedicated PLM Demo Pods At the PLM Summit, attendees will have the chance to see Agile PLM in action at dedicated PLM demo pods, manned by expert members of our Agile PLM team. If you would like to see up close specific Agile PLM functionality, or if you have a question on how to extend the scope of your current implemention or if you want a better understanding of how to leverage Agile PLM to address specific use-cases, stop by one of the Agile PLM demo pods and engage the Agile PLM experts on hand at the PLM Summit. 5. Spend Some Time in Lovely San Francisco Still on the fence about the upcoming PLM Summit? Remember that it is being held in San Francisco, which is a fantastic city for a getaway. After spending time learning and networking about PLM, take an extra day or two to escape the dreary winter and enjoy the beautiful scenery and the unique actitivies offered only by the City by the Bay. You will walk away from the conference not only with renewed excitement about Agile PLM, but feeling rejuvenated in general.

  Read the article

• Understanding each other in web development

  - by Pete Hotchkin

  During my career I have been lucky enough to work in several different roles within web development with many extremely talented people, from incredible designers who were passionate about the placement of every pixel right through to server administrators and DBAs who were always measuring the improvements they were making to their queries in the smallest possible unit. The problem I always faced was that more often than not I was stuck in the middle trying to mediate between these different functions and enable each side to understand the other’s point of view. The main areas of contention that there have always been between these functional groups in my experience have been at 2 key points: during the build phase and then when there is a problem post-build. During both of these times it is often easier for someone to pass the buck onto someone else than spend the time to understand the other person’s perspective. Below is a quick look at two upcoming tools that will not only speed up the build phase for each function, but  also help when it comes to the issues faced once a site has been pushed live. In my experience a web project goes through several phases of development. The first of these is design, generally handled as Photoshop files which are then passed onto a front-end developer. This is the first point at which heated discussions can arise. One problem I’ve seen several times is that the designer doesn’t fully understand the platform constraints that need to be considered, and as a result has designed something that does not translate very well or is simply not possible. Working at Red Gate, I am lucky enough to be able to meet some amazing people and this happened just the other day when I was introduced to Neil Kinnish and Pete Nelson, the creators of what I believe could be a great asset in this designer-developer relationship, Mixture. Mixture allows the front end developer to quickly prototype a web page with built-in frameworks such as bootstrap. It’s not an IDE however, it just sits there in the background and monitors the project files in the background so every time you save a file from your favorite IDE, it will compile things like LESS, compact your JavaScript and the automatically refresh your test browser so you can see the changes instantly. I think one of the best parts of this however is a single button that pushes the changed files up to the web so the designer can instantly see how far the developer has got and the problem that he is facing at that time without the need to spend time setting up a remote server. I can see this being a real asset to remote teams where there needs to be a compromise between the designer and the front-end developer, or just to allow the designer to see how the build is progressing and suggest small alterations. Once the design has been built into the front end the designer’s job is generally done and there are no other points of contention between the designer and the other functions involved in building these web projects. As the project moves into the stage of integrating it into the back end and deploying it to the production server other functions start to be pulled in and other issues arise such as the back-end developer understanding the frameworks that they are using such as the routes that are in place in an MVC application or the number of database calls that the ORM layer is actually making. There are many tools out there that can actually help with these problems such as mini profiler that gives you a quick snapshot of what is going on directly in the browser. For a slightly more in-depth look at what is happening and to gain a deeper understanding of an application you may be working on though, you may want to consider Glimpse. Created by Nik and Anthony, it is an application that sits at the bottom of your browser (installed via NuGet) which can show you information about how your application is pieced together and how the information on screen is being delivered as it happens. With a wealth of community-built plugins such as one for nHibernate and linq2SQL (full list of plugins on NuGet). It can be customized directly to your own setup to truly delve into the code to see what is happening, and can help to reduce the number of confusing moments about whether it is your code that is going wrong or whether there is something more sinister happening directly on the server. All the tools that I have mentioned in this post help to do one thing above all, and that is to ease the barrier of understanding between the different functions that are involved in building and maintaining a web application. In my experience it is very easy to say “Well, that’s not my problem”, simply because the two functions involved don’t truly understand the other’s point of view. Software should not only be seen as a way to streamline our own working process or as a debugging tool but also a communication aid to improve the entire lifecycle of a web project. Glimpse is actually the project that I am the designer on and I would love to get your feedback if you do decide to try it out or if you would like to share your own experiences of working on web projects please fill in your details at https://www.surveymk.com/s/joinGlimpse  or add a comment below and I will get in touch with you.

  Read the article

• Oracle ATG Web Commerce 10 Implementation Developer Boot Camp - Reading (UK) - October 1-12, 2012

  - by Richard Lefebvre

  REGISTER NOW: Oracle ATG Web Commerce 10 Implementation Developer Boot Camp Reading, UK, October 1-12, 2012! OPN invites you to join us for a 10-day implementation bootcamp on Oracle ATG Web Commerce in Reading, UK from October 1-12, 2012.This 10-day boot camp is designed to provide partners with hands-on experience and technical training to successfully build and deploy Oracle ATG Web Commerce 10 Applications. This particular boot camp is focused on helping partners develop the essential skills needed to implement every aspect of an ATG Commerce Application from scratch, (not CRS-based), with a specific goal of enabling experienced Java/J2EE developers with a path towards becoming functional, effective, and contributing members of an ATG implementation team. Built for both new and experienced ATG developers alike, the collaborative nature of this program and its exercises, have proven to be highly effective and extremely valuable in learning the best practices for implementing ATG solutions. Though not required, this bootcamp provides a structured path to earning a Certified Oracle ATG Web Commerce 10 Specialization! What Is Covered: This boot camp is for Application Developers and Software Architects wanting to gain valuable insight into ATG application development best practices, as well as relevant and applicable implementation experience on projects modeled after four of the most common types of applications built on the ATG platform. The following learning objectives are all critical, and are of equal priority in enabling this role to succeed. This learning boot camp will help with: Building a basic functional transaction-ready ATG Web Commerce 10 Application. Utilizing ATG’s platform features such as scenarios, slots, targeters, user profiles and segments, to create a personalized user experience. Building Nucleus components to support and/or extend application functionality. Understanding the intricacies of ATG order checkout and fulfillment. Specifying, designing and implementing new commerce features in ATG 10. Building a functional commerce application modeled after four of the most common types of applications built on the ATG platform, within an agile-based project team environment and under simulated real-world project conditions. Duration: The Oracle ATG Web Commerce 10 Implementation Developer Boot Camp is an instructor-led workshop spanning 10 days. Audience: Application Developers Software Architects Prerequisite Training and Environment Requirements: Programming and Markup Experience with Java J2EE, JavaScript, XML, HTML and CSS Completion of Oracle ATG Web Commerce 10 Implementation Specialist Development Guided Learning Path modules Participants will be required to bring their own laptop that meets the minimum specifications:   64-bit PC and OS (e.g. Windows 7 64-bit) 4GB RAM or more 40GB Hard Disk Space Laptops will require access to the Internet through Remote Desktop via Windows. Agenda Topics: Week 1 – Day 1 through 5 Build a Basic Commerce Application In week one of the boot camp training, we will apply knowledge learned from the ATG Web Commerce 10 Implementation Developer Guided Learning Path modules, towards building a basic transaction-ready commerce application. There will be little to no lectures delivered in this boot camp, as developers will be fully engaged in ATG Application Development activities and best practices. Developers will work independently on the following lab assignments from day's 1 through 5: Lab Assignments  1 Environment Setup 2 Build a dynamic Home Page 3 Site Authentication 4 Build Customer Registration 5 Display Top Level Categories 6 Display Product Sub-Categories 7 Display Product List Page 8 Display Product Detail Page 9 ATG Inventory 10 Build “Add to Cart” Functionality 11 Build Shopping Cart 12 Build Checkout Page  13 Build Checkout Review Page 14 Create an Order and Build Order Confirmation Page 15 Implement Slots and Targeters for Personalization 16 Implement Pricing and Promotions 17 Order Fulfillment Back to top Week 2 – Day 6 through 10 Team-based Case Project In the second week of the boot camp training, participants will be asked to join a project team that will select a case project for the team to implement. Teams will be able to choose from four of the most common application types developed and deployed on the ATG platform. They are as follows: Hard goods with physical fulfillment, Soft goods with electronic fulfillment, a Service or subscription case example, a Course/Event registration case example. Team projects will have approximately 160 hours of use cases/stories for each team to build (40 hours per developer). Each day's Use Cases/Stories will build upon the prior day's work, and therefore must be fully completed at the end of each day. Please note that this boot camp intends to simulate real-world project conditions, and as such will likely require the need for project teams to possibly work beyond normal business hours. To promote further collaboration and group learning, each team will be asked to present their work and share the methodologies and solutions that they've applied to their cases at the end of each day. Location: Oracle Reading CVC TPC510 Room: Wraysbury Reading, UK 9:00 AM – 5:00 PM  Registration Fee (10 Days): US $3,375 Please click on the following link to REGISTER or  visit the Oracle ATG Web Commerce 10 Implementation Developer Boot Camp page for more information. Questions: Patrick Ty Partner Enablement, Oracle Commerce Phone: 310.343.7687 Mobile: 310.633.1013 Email: [email protected]

  Read the article

• Big Data – Various Learning Resources – How to Start with Big Data? – Day 20 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned how to become a Data Scientist for Big Data. In this article we will go over various learning resources related to Big Data. In this series we have covered many of the most essential details about Big Data. At the beginning of this series, I have encouraged readers to send me questions. One of the most popular questions is - “I want to learn more about Big Data. Where can I learn it?” This is indeed a great question as there are plenty of resources out to learn about Big Data and it is indeed difficult to select on one resource to learn Big Data. Hence I decided to write here a few of the very important resources which are related to Big Data. Learn from Pluralsight Pluralsight is a global leader in high-quality online training for hardcore developers.  It has fantastic Big Data Courses and I started to learn about Big Data with the help of Pluralsight. Here are few of the courses which are directly related to Big Data. Big Data: The Big Picture Big Data Analytics with Tableau NoSQL: The Big Picture Understanding NoSQL Data Analysis Fundamentals with Tableau I encourage all of you start with this video course as they are fantastic fundamentals to learn Big Data. Learn from Apache Resources at Apache are single point the most authentic learning resources. If you want to learn fundamentals and go deep about every aspect of the Big Data, I believe you must understand various concepts in Apache’s library. I am pretty impressed with the documentation and I am personally referencing it every single day when I work with Big Data. I strongly encourage all of you to bookmark following all the links for authentic big data learning. Haddop - The Apache Hadoop® project develops open-source software for reliable, scalable, distributed computing. Ambari: A web-based tool for provisioning, managing, and monitoring Apache Hadoop clusters which include support for Hadoop HDFS, Hadoop MapReduce, Hive, HCatalog, HBase, ZooKeeper, Oozie, Pig and Sqoop. Ambari also provides a dashboard for viewing cluster health such as heat maps and ability to view MapReduce, Pig and Hive applications visually along with features to diagnose their performance characteristics in a user-friendly manner. Avro: A data serialization system. Cassandra: A scalable multi-master database with no single points of failure. Chukwa: A data collection system for managing large distributed systems. HBase: A scalable, distributed database that supports structured data storage for large tables. Hive: A data warehouse infrastructure that provides data summarization and ad hoc querying. Mahout: A Scalable machine learning and data mining library. Pig: A high-level data-flow language and execution framework for parallel computation. ZooKeeper: A high-performance coordination service for distributed applications. Learn from Vendors One of the biggest issues with about learning Big Data is setting up the environment. Every Big Data vendor has different environment request and there are lots of things require to set up Big Data framework. Many of the users do not start with Big Data as they are afraid about the resources required to set up framework as well as a time commitment. Here Hortonworks have created fantastic learning environment. They have created Sandbox with everything one person needs to learn Big Data and also have provided excellent tutoring along with it. Sandbox comes with a dozen hands-on tutorial that will guide you through the basics of Hadoop as well it contains the Hortonworks Data Platform. I think Hortonworks did a fantastic job building this Sandbox and Tutorial. Though there are plenty of different Big Data Vendors I have decided to list only Hortonworks due to their unique setup. Please leave a comment if there are any other such platform to learn Big Data. I will include them over here as well. Learn from Books There are indeed few good books out there which one can refer to learn Big Data. Here are few good books which I have read. I will update the list as I will learn more. Ethics of Big Data Balancing Risk and Innovation Big Data for Dummies Head First Data Analysis: A Learner’s Guide to Big Numbers, Statistics, and Good Decisions If you search on Amazon there are millions of the books but I think above three books are a great set of books and it will give you great ideas about Big Data. Once you go through above books, you will have a clear idea about what is the next step you should follow in this series. You will be capable enough to make the right decision for yourself. Tomorrow In tomorrow’s blog post we will wrap up this series of Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Working with Reporting Services Filters–Part 1

  - by smisner

  There are two ways that you can filter data in Reporting Services. The first way, which usually provides a faster performance, is to use query parameters to apply a filter using the WHERE clause in a SQL statement. In that case, the structure of the filter depends upon the syntax recognized by the source database. Another way to filter data in Reporting Services is to apply a filter to a dataset, data region, or a group. Using this latter method, you can even apply multiple filters. However, the use of filter operators or the setup of multiple filters is not always obvious, so in this series of posts, I'll provide some more information about the configuration of filters. First, why not use query parameters exclusively for filtering? Here are a few reasons: You might want to apply a filter to part of the report, but not all of the report. Your dataset might retrieve data from a stored procedure, and doesn't allow you to pass a query parameter for filtering purposes. Your report might be set up as a snapshot on the report server and, in that case, cannot be dynamically filtered based on a query parameter. Next, let's look at how to set up a report filter in general. The process is the same whether you are applying the filter to a dataset, data region, or a group. When you go to the Filters page in the Properties dialog box for whichever of these items you selected (dataset, data region, group), you click the Add button to create a new filter. The interface looks like this: The Expression field is usually a field in the dataset, so to make it easier for you to make a selection,the drop-down list displays all of the current dataset fields. But notice the expression button to the right, which means that you can set up any type of expression-not just a dataset field. To the right of the expression button, you'll find a data type drop-down list. It's important to specify the correct data type for the field or expression you're using. Now for the operators. Here's a list of the options that you have: This Operator Performs This Action =, <>, >, >=, <, <=, Like Compares expression to value Top N, Bottom N Compares expression to Top (Bottom) set of N values (N = integer) Top %, Bottom % Compares expression to Top (Bottom) N percent of values (N = integer or float) Between Determines whether expression is between two values, inclusive In Determines whether expression is found in list of values Last, the Value is what you're comparing to the expression using the operator. The construction of a filter using some operators (=, <>, >, etc.) is fairly simple. If my dataset (for AdventureWorks data) has a Category field, and I have a parameter that prompts the user for a single category, I can set up a filter like this: Expression Data Type Operator Value [Category] Text = [@Category] But if I set the parameter to accept multiple values, I need to change the operator from = to In, just as I would have to do if I were using a query parameter. The parameter expression, [@Category], which translates to =Parameters!Category.Value, doesn’t need to change because it represents an array as soon as I change the parameter to allow multiple values. The “In” operator requires an array. With that in mind, let’s consider a variation on Value. Let’s say that I have a parameter that prompts the user for a particular year – and for simplicity’s sake, this parameter only allows a single value, and I have an expression that evaluates the previous year based on the user’s selection. Then I want to use these two values in two separate filters with an OR condition. That is, I want to filter either by the year selected OR by the year that was computed. If I create two filters, one for each year (as shown below), then the report will only display results if BOTH filter conditions are met – which would never be true. Expression Data Type Operator Value [CalendarYear] Integer = [@Year] [CalendarYear] Integer = =Parameters!Year.Value-1 To handle this scenario, we need to create a single filter that uses the “In” operator, and then set up the Value expression as an array. To create an array, we use the Split function after creating a string that concatenates the two values (highlighted in yellow) as shown below. Expression Data Type Operator Value =Cstr(Fields!CalendarYear.Value) Text In =Split( CStr(Parameters!Year.Value) + ”,” + CStr(Parameters!Year.Value-1) , “,”) Note that in this case, I had to apply a string conversion on the year integer so that I could concatenate the parameter selection with the calculated year. Pay attention to the second argument of the Split function—you must use a comma delimiter for the result to work correctly with the In operator. I also had to change the Expression value from [CalendarYear] (or =Fields!CalendarYear.Value) so that the expression would return a string that I could compare with the values in the string array. More fun with filter expressions in future posts!

  Read the article

• Mocking successive calls of similar type via sequential mocking

  - by mehfuzh

  In this post , i show how you can benefit from  sequential mocking feature[In JustMock] for setting up expectations with successive calls of same type.  To start let’s first consider the following dummy database and entity class. public class Person {     public virtual string Name { get; set; }     public virtual int Age { get; set; } }   public interface IDataBase {     T Get<T>(); } Now, our test goal is to return different entity for successive calls on IDataBase.Get<T>(). By default, the behavior in JustMock is override , which is similar to other popular mocking tools. By override it means that the tool will consider always the latest user setup. Therefore, the first example will return the latest entity every-time and will fail in line #12: Person person1 = new Person { Age = 30, Name = "Kosev" }; Person person2 = new Person { Age = 80, Name = "Mihail" };   var database = Mock.Create<IDataBase>();   Queue<Person> queue = new Queue<Person>();   Mock.Arrange(() => database.Get<Person>()).Returns(() => queue.Dequeue()); Mock.Arrange(() => database.Get<Person>()).Returns(person2);   // this will fail Assert.Equal(person1.GetHashCode(), database.Get<Person>().GetHashCode());   Assert.Equal(person2.GetHashCode(), database.Get<Person>().GetHashCode()); We can solve it the following way using a Queue and that removes the item from bottom on each call: Person person1 = new Person { Age = 30, Name = "Kosev" }; Person person2 = new Person { Age = 80, Name = "Mihail" };   var database = Mock.Create<IDataBase>();   Queue<Person> queue = new Queue<Person>();   queue.Enqueue(person1); queue.Enqueue(person2);   Mock.Arrange(() => database.Get<Person>()).Returns(queue.Dequeue());   Assert.Equal(person1.GetHashCode(), database.Get<Person>().GetHashCode()); Assert.Equal(person2.GetHashCode(), database.Get<Person>().GetHashCode()); This will ensure that right entity is returned but this is not an elegant solution. So, in JustMock we introduced a  new option that lets you set up your expectations sequentially. Like: Person person1 = new Person { Age = 30, Name = "Kosev" }; Person person2 = new Person { Age = 80, Name = "Mihail" };   var database = Mock.Create<IDataBase>();   Mock.Arrange(() => database.Get<Person>()).Returns(person1).InSequence(); Mock.Arrange(() => database.Get<Person>()).Returns(person2).InSequence();   Assert.Equal(person1.GetHashCode(), database.Get<Person>().GetHashCode()); Assert.Equal(person2.GetHashCode(), database.Get<Person>().GetHashCode()); The  “InSequence” modifier will tell the mocking tool to return the expected result as in the order it is specified by user. The solution though pretty simple and but neat(to me) and way too simpler than using a collection to solve this type of cases. Hope that helps P.S. The example shown in my blog is using interface don’t require a profiler  and you can even use a notepad and build it referencing Telerik.JustMock.dll, run it with GUI tools and it will work. But this feature also applies to concrete methods that includes JM profiler and can be implemented for more complex scenarios.

  Read the article

• Performing a clean database creation using msbuild

  - by Robert May

  So I’m taking a break from writing about other Agile stuff for a post. :)  I’m still going to get back to the other subjects, but this is fun too. Something I’ve done quite a bit of is MSBuild and CI work.  I’m experimenting with ways to improve what I’ve done in the past, particularly around database CI. Today, I developed a mechanism for starting from scratch with your database.  By scratch, I mean blowing away the existing database and creating it again from a single command line call.  I’m a firm believer that developers should be able to get to a known clean state at the database level with a single command and that they should be operating off of their own isolated database to improve productivity.  These scripts will help that. Here’s how I did it.  First, we have to disconnect users.  I did so using the help of a script from sql server central.  Note that I’m using sqlcmd variable replacement. -- kills all the users in a particular database -- dlhatheway/3M, 11-Jun-2000 declare @arg_dbname sysname declare @a_spid smallint declare @msg varchar(255) declare @a_dbid int set @arg_dbname = '$(DatabaseName)' select @a_dbid = sdb.dbid from master..sysdatabases sdb where sdb.name = @arg_dbname declare db_users insensitive cursor for select sp.spid from master..sysprocesses sp where sp.dbid = @a_dbid open db_users fetch next from db_users into @a_spid while @@fetch_status = 0 begin select @msg = 'kill '+convert(char(5),@a_spid) print @msg execute (@msg) fetch next from db_users into @a_spid end close db_users deallocate db_users GO Once all users are booted from the database, we can commence with recreating the database.  I generated the script that is used to create a database from SQL Server management studio, so I’m only going to show the bits that weren’t generated that are important.  There are a bunch of Alter Database statements that aren’t shown. First, I had to find the default location of the database files in the install, since they can be in many different locations.  I used Method 1 from a technet blog and then modified it a bit to do what I needed to do.  I ended up using dynamic SQL because for the life of me, I couldn’t get the “Filename” property to not return an error when I used anything besides a string.  I’m dropping the database first, if it exists.  Here’s the code:   IF EXISTS(SELECT 1 FROM [master].[sys].[databases] WHERE [name] = N'$(DatabaseName)') BEGIN drop database $(DatabaseName) END; go IF EXISTS(SELECT 1 FROM [master].[sys].[databases] WHERE [name] = 'zzTempDBForDefaultPath') BEGIN DROP DATABASE zzTempDBForDefaultPath END; -- Create temp database. Because no options are given, the default data and --- log path locations are used CREATE DATABASE zzTempDBForDefaultPath; DECLARE @Default_Data_Path VARCHAR(512), @Default_Log_Path VARCHAR(512); --Get the default data path SELECT @Default_Data_Path = ( SELECT LEFT(physical_name,LEN(physical_name)-CHARINDEX('\',REVERSE(physical_name))+1) FROM sys.master_files mf INNER JOIN sys.[databases] d ON mf.[database_id] = d.[database_id] WHERE d.[name] = 'zzTempDBForDefaultPath' AND type = 0); --Get the default Log path SELECT @Default_Log_Path = ( SELECT LEFT(physical_name,LEN(physical_name)-CHARINDEX('\',REVERSE(physical_name))+1) FROM sys.master_files mf INNER JOIN sys.[databases] d ON mf.[database_id] = d.[database_id] WHERE d.[name] = 'zzTempDBForDefaultPath' AND type = 1); --Clean up. IF EXISTS(SELECT 1 FROM [master].[sys].[databases] WHERE [name] = 'zzTempDBForDefaultPath') BEGIN DROP DATABASE zzTempDBForDefaultPath END; DECLARE @SQL nvarchar(max) SET @SQL= 'CREATE DATABASE $(DatabaseName) ON PRIMARY ( NAME = N''$(DatabaseName)'', FILENAME = N''' + @Default_Data_Path + N'$(DatabaseName)' + '.mdf' + ''', SIZE = 2048KB , FILEGROWTH = 1024KB ) LOG ON ( NAME = N''$(DatabaseName)Log'', FILENAME = N''' + @Default_Log_Path + N'$(DatabaseName)' + '.ldf' + ''', SIZE = 1024KB , FILEGROWTH = 10%) ' exec (@SQL) GO And with that, your database is created.  You can run these scripts on any server and on any database name.  To do that, I created an MSBuild script that looks like this: <Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="4.0"> <PropertyGroup> <DatabaseName>MyDatabase</DatabaseName> <Server>localhost</Server> <SqlCmd>sqlcmd -v DatabaseName=$(DatabaseName) -S $(Server) -i </SqlCmd> <ScriptDirectory>.\Scripts</ScriptDirectory> </PropertyGroup> <Target Name ="Rebuild"> <ItemGroup> <ScriptFiles Include="$(ScriptDirectory)\*.sql"/> </ItemGroup> <Exec Command="$(SqlCmd) &quot;%(ScriptFiles.Identity)&quot;" ContinueOnError="false"/> </Target> </Project> Note that the Scripts directory is underneath the directory where I’m running the msbuild command and is relative to that directory.  Note also that the target is using batching to run each script in the scripts subdirectory, one after the other.  Each script is passed to the sqlcmd command line execution using the .Identity property on the itemgroup that is created.  This target file is saved in the file “Database.target”. To make this work, you’ll need msbuild in your path, and then run the following command: msbuild database.target /target:Rebuild Once you’ve got your virgin database setup, you’d then need to use a tool like dbdeploy.net to determine that it was a virgin database, build a change script based on the change scripts, and then you’d want another sqlcmd call to update the database with the appropriate scripts.  I’m doing that next, so I’ll post a blog update when I’ve got it working. Technorati Tags: MSBuild,Agile,CI,Database

  Read the article

• Helping install mrcwa and solve problems with f2py in Ubuntu 14.04 LTS

  - by user288160

  I am sorry if this is the wrong section but I am starting to get desperate, please someone help me... I need to install the program mrcwa-20080820 (sourceforge.net/projects/mrcwa/) because a summer project that I am involved. I need to use it together with anaconda (store.continuum.io/cshop/anaconda/), I already installed Anaconda and apparently it is working. When I type: conda --version I got the expected answer. conda 3.5.2 If I tried to import numpy or scipy with python or simple type f2py there are no errors. So far so good. But when I tried to install this program sudo python setup.py install I got these errors: running install running build sh: 1: f2py: not found cp: cannot stat ‘mrcwaf.so’: No such file or directory running build_py running install_lib running install_egg_info Removing /usr/local/lib/python2.7/dist-packages/mrcwa-20080820.egg-info Writing /usr/local/lib/python2.7/dist-packages/mrcwa-20080820.egg-info Obs: I am trying to use intel fortran 64-bits and Ubuntu 14.04 LTS. So I was checking f2py and tried to execute the program hello world f2py -c -m hello hello.f from here: cens.ioc.ee/projects/f2py2e/index.html#usage and I had some problems too: running build running config_cc unifing config_cc, config, build_clib, build_ext, build commands --compiler options running config_fc unifing config_fc, config, build_clib, build_ext, build commands --fcompiler options running build_src build_src building extension "hello" sources f2py options: [] f2py:> /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.c creating /tmp/tmpf8P4Y3/src.linux-x86_64-2.7 Reading fortran codes... Reading file 'hello.f' (format:fix,strict) Post-processing... Block: hello Block: foo Post-processing (stage 2)... Building modules... Building module "hello"... Constructing wrapper function "foo"... foo(a) Wrote C/API module "hello" to file "/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 /hellomodule.c" adding '/tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.c' to sources. adding '/tmp/tmpf8P4Y3/src.linux-x86_64-2.7' to include_dirs. copying /home/felipe/.local/lib/python2.7/site-packages/numpy/f2py/src/fortranobject.c -> /tmp/tmpf8P4Y3/src.linux-x86_64-2.7 copying /home/felipe/.local/lib/python2.7/site-packages/numpy/f2py/src/fortranobject.h -> /tmp/tmpf8P4Y3/src.linux-x86_64-2.7 build_src: building npy-pkg config files running build_ext customize UnixCCompiler customize UnixCCompiler using build_ext customize Gnu95FCompiler Could not locate executable gfortran Could not locate executable f95 customize IntelFCompiler Found executable /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort customize LaheyFCompiler Could not locate executable lf95 customize PGroupFCompiler Could not locate executable pgfortran customize AbsoftFCompiler Could not locate executable f90 Could not locate executable f77 customize NAGFCompiler customize VastFCompiler customize CompaqFCompiler Could not locate executable fort customize IntelItaniumFCompiler customize IntelEM64TFCompiler customize IntelEM64TFCompiler customize IntelEM64TFCompiler using build_ext building 'hello' extension compiling C sources C compiler: gcc -pthread -fno-strict-aliasing -g -O2 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC creating /tmp/tmpf8P4Y3/tmp creating /tmp/tmpf8P4Y3/tmp/tmpf8P4Y3 creating /tmp/tmpf8P4Y3/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 compile options: '-I/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 -I/home/felipe/.local/lib/python2.7/site-packages/numpy/core/include -I/home/felipe/anaconda/include/python2.7 -c' gcc: /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.c In file included from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarraytypes.h:1761:0, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarrayobject.h:17, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/arrayobject.h:4, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.h:13, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.c:17: /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/npy_1_7_deprecated_api.h:15:2: warning: #warning "Using deprecated NumPy API, disable it by " "#defining NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION" [-Wcpp] #warning "Using deprecated NumPy API, disable it by " \ ^ gcc: /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.c In file included from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarraytypes.h:1761:0, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarrayobject.h:17, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/arrayobject.h:4, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.h:13, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.c:2: /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/npy_1_7_deprecated_api.h:15:2: warning: #warning "Using deprecated NumPy API, disable it by " "#defining NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION" [-Wcpp] #warning "Using deprecated NumPy API, disable it by " \ ^ compiling Fortran sources Fortran f77 compiler: /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -FI -fPIC -xhost -openmp -fp-model strict Fortran f90 compiler: /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -FR -fPIC -xhost -openmp -fp-model strict Fortran fix compiler: /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -FI -fPIC -xhost -openmp -fp-model strict compile options: '-I/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 -I/home/felipe/.local /lib/python2.7/site-packages/numpy/core/include -I/home/felipe/anaconda/include/python2.7 -c' ifort:f77: hello.f /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -shared -shared -nofor_main /tmp/tmpf8P4Y3/tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.o /tmp/tmpf8P4Y3 /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.o /tmp/tmpf8P4Y3/hello.o -L/home/felipe /anaconda/lib -lpython2.7 -o ./hello.so Removing build directory /tmp/tmpf8P4Y3 Please help me I am new in ubuntu and python. I really need this program, my advisor is waiting an answer. Thank you very much, Felipe Oliveira.

  Read the article

• A new SQL, a new Analysis Services, a new Workshop! #ssas #sql2012

  - by Marco Russo (SQLBI)

  One week ago Microsoft SQL Server 2012 finally debuted with a virtual launch event and you can find many intro sessions there (20 minutes each). There is a lot of new content available if you want to learn more about SQL 2012 and in this blog post I’d like to provide a few link to sessions, documents, bits and courses that are available now or very soon. First of all, the release of Analysis Services 2012 has finally released PowerPivot 2012 (many of us called it PowerPivot v2 before this official name) and also the new Data Mining Add-in for Microsoft Office 2010, now available also for Excel 64bit! And, of course, don’t miss the Microsoft SQL Server 2012 Feature Pack, there are a lot of upgrades for both DBAs and developers. I just discovered there is a new LocalDB version of SQL Express that can run in user mode without any setup. Is this the end of SQL CE? But now, back to Analysis Services: if you want some tutorial on Tabular, the Microsoft Virtual Academy has a whole track dedicated to Analysis Services 2012 but you will probably be interested also in the one about Reporting Services 2012. If you think that virtual is good but it’s not enough, there are plenty of conferences in the coming months – these are just those where I and Alberto will deliver some SSAS Tabular presentations: SQLBits X, London, March 29-31, 2012: if you are in London or want a good reason to go, this is the most important SQL Server event in Europe this year, no doubts about it. And not only because of the high number of attendees, but also because there is an impressive number of speakers (excluding me, of course) coming from all over the world. This is an event second only to PASS Summit in Seattle so there are no good reasons to not attend it. Microsoft SQL Server & Business Intelligence Conference 2012, Milan, March 28-29, 2012: this is an Italian conference so the language might be a barrier, but many of us also speak English and the food is good! Just a few seats still available. TechEd North America, Orlando, June 11-14, 2012: you know, this is a big event and it contains everything – if you want to spend a whole day learning the SSAS Tabular model with me and Alberto, don’t miss our pre-conference day “Using BISM Tabular in Microsoft SQL Server Analysis Services 2012” (be careful, it is on June 10, a nice study-Sunday!). TechEd Europe, Amsterdam, June 26-29, 2012: the European version of TechEd provides almost the same content and you don’t have to go overseas. We also run the same pre-conference day “Using BISM Tabular in Microsoft SQL Server Analysis Services 2012” (in this case, it is on June 25, that’s a regular Monday). I and Alberto will also speak at some user group meeting around Europe during… well, we’re going to travel a lot in the next months. In fact, if you want to get a complete training on SSAS Tabular, you should spend two days with us in one of our SSAS Tabular Workshop! We prepared a 2-day seminar, a very intense one, that start from the simple tabular modeling and cover architecture, DAX, query, advanced modeling, security, deployment, optimization, monitoring, relationships with PowerPivot and Multidimensional… Really, there are a lot of stuffs here! We announced the first dates in Europe and also an online edition optimized for America’s time zone: Apr 16-17, 2012 – Amsterdam, Netherlands Apr 26-27, 2012 – Copenhagen, Denmark May 7-8, 2012 – Online for America’s time zone May 14-15, 2012 – Brussels, Belgium May 21-22, 2012 – Oslo, Norway May 24-25, 2012 – Stockholm, Sweden May 28-29, 2012 – London, United Kingdom May 31-Jun 1, 2012 – Milan, Italy (Italian language) Also Chris Webb will join us in this workshop and in every date you can find who is the speaker on the web site. The course is based on our upcoming book, almost 600 pages (!) about SSAS Tabular, an incredible effort that will be available very soon in a preview (rough cuts from O’Reilly) and will be on the shelf in May. I will provide a link to order it as soon as we have one! And if you think that this is not enough… you’re right! Do you know what is the only thing you can do to optimize your Tabular model? Optimize your DAX code. Learning DAX is easy, mastering DAX requires some knowledge… and our DAX Advanced Workshop will provide exactly the required content. Public classes will be available later this year, by now we just deliver it on demand.

  Read the article

• .NET Security Part 3

  - by Simon Cooper

  You write a security-related application that allows addins to be used. These addins (as dlls) can be downloaded from anywhere, and, if allowed to run full-trust, could open a security hole in your application. So you want to restrict what the addin dlls can do, using a sandboxed appdomain, as explained in my previous posts. But there needs to be an interaction between the code running in the sandbox and the code that created the sandbox, so the sandboxed code can control or react to things that happen in the controlling application. Sandboxed code needs to be able to call code outside the sandbox. Now, there are various methods of allowing cross-appdomain calls, the two main ones being .NET Remoting with MarshalByRefObject, and WCF named pipes. I’m not going to cover the details of setting up such mechanisms here, or which you should choose for your specific situation; there are plenty of blogs and tutorials covering such issues elsewhere. What I’m going to concentrate on here is the more general problem of running fully-trusted code within a sandbox, which is required in most methods of app-domain communication and control. Defining assemblies as fully-trusted In my last post, I mentioned that when you create a sandboxed appdomain, you can pass in a list of assembly strongnames that run as full-trust within the appdomain: // get the Assembly object for the assembly Assembly assemblyWithApi = ... // get the StrongName from the assembly's collection of evidence StrongName apiStrongName = assemblyWithApi.Evidence.GetHostEvidence<StrongName>(); // create the sandbox AppDomain sandbox = AppDomain.CreateDomain( "Sandbox", null, appDomainSetup, restrictedPerms, apiStrongName); Any assembly that is loaded into the sandbox with a strong name the same as one in the list of full-trust strong names is unconditionally given full-trust permissions within the sandbox, irregardless of permissions and sandbox setup. This is very powerful! You should only use this for assemblies that you trust as much as the code creating the sandbox. So now you have a class that you want the sandboxed code to call: // within assemblyWithApi public class MyApi { public static void MethodToDoThings() { ... } } // within the sandboxed dll public class UntrustedSandboxedClass { public void DodgyMethod() { ... MyApi.MethodToDoThings(); ... } } However, if you try to do this, you get quite an ugly exception: MethodAccessException: Attempt by security transparent method ‘UntrustedSandboxedClass.DodgyMethod()’ to access security critical method ‘MyApi.MethodToDoThings()’ failed. Security transparency, which I covered in my first post in the series, has entered the picture. Partially-trusted code runs at the Transparent security level, fully-trusted code runs at the Critical security level, and Transparent code cannot under any circumstances call Critical code. Security transparency and AllowPartiallyTrustedCallersAttribute So the solution is easy, right? Make MethodToDoThings SafeCritical, then the transparent code running in the sandbox can call the api: [SecuritySafeCritical] public static void MethodToDoThings() { ... } However, this doesn’t solve the problem. When you try again, exactly the same exception is thrown; MethodToDoThings is still running as Critical code. What’s going on? By default, a fully-trusted assembly always runs Critical code, irregardless of any security attributes on its types and methods. This is because it may not have been designed in a secure way when called from transparent code – as we’ll see in the next post, it is easy to open a security hole despite all the security protections .NET 4 offers. When exposing an assembly to be called from partially-trusted code, the entire assembly needs a security audit to decide what should be transparent, safe critical, or critical, and close any potential security holes. This is where AllowPartiallyTrustedCallersAttribute (APTCA) comes in. Without this attribute, fully-trusted assemblies run Critical code, and partially-trusted assemblies run Transparent code. When this attribute is applied to an assembly, it confirms that the assembly has had a full security audit, and it is safe to be called from untrusted code. All code in that assembly runs as Transparent, but SecurityCriticalAttribute and SecuritySafeCriticalAttribute can be applied to individual types and methods to make those run at the Critical or SafeCritical levels, with all the restrictions that entails. So, to allow the sandboxed assembly to call the full-trust API assembly, simply add APCTA to the API assembly: [assembly: AllowPartiallyTrustedCallers] and everything works as you expect. The sandboxed dll can call your API dll, and from there communicate with the rest of the application. Conclusion That’s the basics of running a full-trust assembly in a sandboxed appdomain, and allowing a sandboxed assembly to access it. The key is AllowPartiallyTrustedCallersAttribute, which is what lets partially-trusted code call a fully-trusted assembly. However, an assembly with APTCA applied to it means that you have run a full security audit of every type and member in the assembly. If you don’t, then you could inadvertently open a security hole. I’ll be looking at ways this can happen in my next post.

  Read the article

• Tuning Red Gate: #4 of Some

  - by Grant Fritchey

  First time connecting to these servers directly (keys to the kingdom, bwa-ha-ha-ha. oh, excuse me), so I'm going to take a look at the server properties, just to see if there are any issues there. Max memory is set, cool, first possible silly mistake clear. In fact, these look to be nicely set up. Oh, I'd like to see the ANSI Standards set by default, but it's not a big deal. The default location for database data is the F:\ drive, where I saw all the activity last time. Cool, the people maintaining the servers in our company listen, parallelism threshold is set to 35 and optimize for ad hoc is enabled. No shocks, no surprises. The basic setup is appropriate. On to the problem database. Nothing wrong in the properties. The database is in SIMPLE recovery, but I think it's a reporting system, so no worries there. Again, I'd prefer to see the ANSI settings for connections, but that's the worst thing I can see. Time to look at the queries, tables, indexes and statistics because all the information I've collected over the last several days suggests that we're not looking at a systemic problem (except possibly not enough memory), but at the traditional tuning issues. I just want to note that, I started looking at the system, not the queries. So should you when tuning your environment. I know, from the data collected through SQL Monitor, what my top poor performing queries are, and the most frequently called, etc. I'm starting with the most frequently called. I'm going to get the execution plan for this thing out of the cache (although, with the cache dumping constantly, I might not get it). And it's not there. Called 1.3 million times over the last 3 days, but it's not in cache. Wow. OK. I'll see what's in cache for this database: SELECT  deqs.creation_time,         deqs.execution_count,         deqs.max_logical_reads,         deqs.max_elapsed_time,         deqs.total_logical_reads,         deqs.total_elapsed_time,         deqp.query_plan,         SUBSTRING(dest.text, (deqs.statement_start_offset / 2) + 1,                   (deqs.statement_end_offset - deqs.statement_start_offset) / 2                   + 1) AS QueryStatement FROM    sys.dm_exec_query_stats AS deqs         CROSS APPLY sys.dm_exec_sql_text(deqs.sql_handle) AS dest         CROSS APPLY sys.dm_exec_query_plan(deqs.plan_handle) AS deqp WHERE   dest.dbid = DB_ID('Warehouse') AND deqs.statement_end_offset > 0 AND deqs.statement_start_offset > 0 ORDER BY deqs.max_logical_reads DESC ; And looking at the most expensive operation, we have our first bad boy: Multiple table scans against very large sets of data and a sort operation. a sort operation? It's an insert. Oh, I see, the table is a heap, so it's doing an insert, then sorting the data and then inserting into the primary key. First question, why isn't this a clustered index? Let's look at some more of the queries. The next one is deceiving. Here's the query plan: You're thinking to yourself, what's the big deal? Well, what if I told you that this thing had 8036318 reads? I know, you're looking at skinny little pipes. Know why? Table variable. Estimated number of rows = 1. Actual number of rows. well, I'm betting several more than one considering it's read 8 MILLION pages off the disk in a single execution. We have a serious and real tuning candidate. Oh, and I missed this, it's loading the table variable from a user defined function. Let me check, let me check. YES! A multi-statement table valued user defined function. And another tuning opportunity. This one's a beauty, seriously. Did I also mention that they're doing a hash against all the columns in the physical table. I'm sure that won't lead to scans of a 500,000 row table, no, not at all. OK. I lied. Of course it is. At least it's on the top part of the Loop which means the scan is only executed once. I just did a cursory check on the next several poor performers. all calling the UDF. I think I found a big tuning opportunity. At this point, I'm typing up internal emails for the company. Someone just had their baby called ugly. In addition to a series of suggested changes that we need to implement, I'm also apologizing for being such an unkind monster as to question whether that third eye & those flippers belong on such an otherwise lovely child.

  Read the article

• Timeout Considerations for Solicit Response – Part 2

  - by Michael Stephenson

  To follow up a previous article about timeouts and how they can affect your application I have extended the sample we were using to include WCF. I will execute some test scenarios and discuss the results. The sample We begin by consuming exactly the same web service which is sitting on a remote server. This time I have created a .net 3.5 application which will consume the web service using the basichttp binding. To show you the configuration for the consumption of this web service please refer to the below diagram. You can see like before we also have the connectionManagement element in the configuration file. I have added a WCF service reference (also using the asynchronous proxy methods) and have the below code sample in the application which will asynchronously make the web service calls and handle the responses on a call back method invoked by a delegate. If you have read the previous article you will notice that the code is almost the same.   Sample 1 – WCF with Default Timeouts In this test I set about recreating the same scenario as previous where we would run the test but this time using WCF as the messaging component. For the first test I would use the default configuration settings which WCF had setup when we added a reference to the web service. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"   The Test We simulated 21 calls to the web service Test Results The client-side trace is as follows:   The server-side trace is as follows: Some observations on the results are as follows: The timeouts happened quicker than in the previous tests because some calls were timing out before they attempted to connect to the server The first few calls that timed out did actually connect to the server and did execute successfully on the server   Test 2 – Increase Open Connection Timeout & Send Timeout In this test I wanted to increase both the send and open timeout values to try and give everything a chance to go through. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00"   The Test We simulated 21 calls to the web service   Test Results The client side trace for this test was   The server-side trace for this test was: Some observations on this test are: This test proved if the timeouts are high enough everything will just go through   Test 3 – Increase just the Send Timeout In this test we wanted to increase just the send timeout. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:10:00"   The Test We simulated 21 calls to the web service   Test Results The below is the client side trace The below is the server side trace Some observations on this test are: In this test from both the client and server perspective everything ran through fine The open connection timeout did not seem to have any effect   Test 4 – Increase Just the Open Connection Timeout In this test I wanted to validate the change to the open connection setting by increasing just this on its own. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"   The Test We simulated 21 calls to the web service Test Results The client side trace was The server side trace was Some observations on this test are: In this test you can see that the open connection which relates to opening the channel timeout increase was not the thing which stopped the calls timing out It's the send of data which is timing out On the server you can see that the successful few calls were fine but there were also a few calls which hit the server but timed out on the client You can see that not all calls hit the server which was one of the problems with the WSE and ASMX options   Test 5 – Smaller Increase in Send Timeout In this test I wanted to make a smaller increase to the send timeout than previous just to prove that it was the key setting which was controlling what was timing out. The timeout values for this test are: openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:02:30"   The Test We simulated 21 calls to the web service Test Results The client side trace was   The server side trace was Some observations on this test are: You can see that most of the calls got through fine On the client you can see that call 20 timed out but still hit the server and executed fine.   Summary At this point between the two articles we have quite a lot of scenarios showing the different way the timeout setting have played into our original performance issue, and now we can see how WCF could offer an improved way to handle the problem. To summarise the differences in the timeout properties for the three technology stacks: ASMX The timeout value only applies to the execution time of your request on the server. The timeout does not consider how long your code might be waiting client side to get a connection. WSE The timeout value includes both the time to obtain a connection and also the time to execute the request. A timeout will not be thrown as an error until an attempt to connect to the server is made. This means a 40 second timeout setting may not throw the error until 60 seconds when the connection to the server is made. If the connection to the server is made you should be aware that your message will be processed and you should design for this. WCF The WCF send timeout is the setting most equivalent to the settings we were looking at previously. Like WSE this setting the counter includes the time to get a connection as well as the time to execute on a server. Unlike WSE and ASMX an error will be thrown as soon as the send timeout from making your call from user code has elapsed regardless of whether we are waiting for a connection or have an open connection to the server. This may to a user appear to have better latency in getting an error response compared to WSE or ASMX.

  Read the article

• What should you bring to the table as a Software Architect?

  - by Ahmad Mageed

  There have been many questions with good answers about the role of a Software Architect (SA) on StackOverflow and Programmers SE. I am trying to ask a slightly more focused question than those. The very definition of a SA is broad so for the sake of this question let's define a SA as follows: A Software Architect guides the overall design of a project, gets involved with coding efforts, conducts code reviews, and selects the technologies to be used. In other words, I am not talking about managerial rest and vest at the crest (further rhyming words elided) types of SAs. If I were to pursue any type of SA position I don't want to be away from coding. I might sacrifice some time to interface with clients and Business Analysts etc., but I am still technically involved and I'm not just aware of what's going on through meetings. With these points in mind, what should a SA bring to the table? Should they come in with a mentality of "laying down the law" (so to speak) and enforcing the usage of certain tools to fit "their way," i.e., coding guidelines, source control, patterns, UML documentation, etc.? Or should they specify initial direction and strategy then be laid back and jump in as needed to correct the ship's direction? Depending on the organization this might not work. An SA who relies on TFS to enforce everything may struggle to implement their plan at an employer that only uses StarTeam. Similarly, an SA needs to be flexible depending on the stage of the project. If it's a fresh project they have more choices, whereas they might have less for existing projects. Here are some SA stories I have experienced as a way of sharing some background in hopes that answers to my questions might also shed some light on these issues: I've worked with an SA who code reviewed literally every single line of code of the team. The SA would do this for not just our project but other projects in the organization (imagine the time spent on this). At first it was useful to enforce certain standards, but later it became crippling. FxCop was how the SA would find issues. Don't get me wrong, it was a good way to teach junior developers and force them to think of the consequences of their chosen approach, but for senior developers it was seen as somewhat draconian. One particular SA was against the use of a certain library, claiming it was slow. This forced us to write tons of code to achieve things differently while the other library would've saved us a lot of time. Fast forward to the last month of the project and the clients were complaining about performance. The only solution was to change certain functionality to use the originally ignored approach despite early warnings from the devs. By that point a lot of code was thrown out and not reusable, leading to overtime and stress. Sadly the estimates used for the project were based on the old approach which my project was forbidden from using so it wasn't an appropriate indicator for estimation. I would hear the PM say "we've done this before," when in reality they had not since we were using a new library and the devs working on it were not the same devs used on the old project. The SA who would enforce the usage of DTOs, DOs, BOs, Service layers and so on for all projects. New devs had to learn this architecture and the SA adamantly enforced usage guidelines. Exceptions to usage guidelines were made when it was absolutely difficult to follow the guidelines. The SA was grounded in their approach. Classes for DTOs and all CRUD operations were generated via CodeSmith and database schemas were another similar ball of wax. However, having used this setup everywhere, the SA was not open to new technologies such as LINQ to SQL or Entity Framework. I am not using this post as a platform for venting. There were positive and negative aspects to my experiences with the SA stories mentioned above. My questions boil down to: What should an SA bring to the table? How can they strike a balance in their decision making? Should one approach an SA job (as defined earlier) with the mentality that they must enforce certain ground rules? Anything else to consider? Thanks! I'm sure these job tasks are easily extended to people who are senior devs or technical leads, so feel free to answer at that capacity as well.

  Read the article

• How to install iodbc in Ubuntu 12.10

  - by Hanynowsky

  I need to install the library iodbc (depends on libodbc2) in my Quantal machine. Yet there is creepy dependency problem. This was replaced somehow by unixodbc which I don't have, installed. Here is what I get when I try to install : sudo apt-get install libiodbc2-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libiodbc2-dev : Depends: libiodbc2 (= 3.52.7-2build2) but it is not going to be installed Depends: iodbc (= 3.52.7-2build2) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I can tell that iodbc conflicts with odbcinst. Yet, I cannot remove it due to the following: sudo apt-get remove odbcinst Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: akonadi-backend-mysql calligra-l10n-engb kde-l10n-engb kdevelop-l10n kdevelop-php-docs-l10n kdevelop-php-l10n libakonadi-kabc4 libakonadi-notes4 libakonadiprotocolinternals1 libboost-thread1.49.0 libdmtx0a libgpgme++2 libkcalcore4 libkdgantt2 libkholidays4 libkimap4 libkldap4 libkmbox4 libkmime4 libkolabxml0 libkpgp4 libkresources4 libksieve4 libprison0 libqgpgme1 libqrencode3 libxerces-c3.1 Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: akonadi-server k3b k3b-i18n katepart kde-runtime kdelibs-bin kdelibs5-plugins kdepim-runtime kdepim-strigi-plugins kdepimlibs-kio-plugins kdoctools kget kmag kmail kmix kmousetool ksystemlog kubuntu-debug-installer language-pack-kde-ar language-pack-kde-en libakonadi-calendar4 libakonadi-contact4 libakonadi-kcal4 libakonadi-kde4 libakonadi-kmime4 libcalendarsupport4 libincidenceeditorsng4 libk3b6 libkabc4 libkactivities-bin libkactivities6 libkalarmcal2 libkatepartinterfaces4 libkcal4 libkcalutils4 libkcddb4 libkde3support4 libkdepim4 libkdepimdbusinterfaces4 libkdewebkit5 libkemoticons4 libkfile4 libkgapi0 libkhtml5 libkio5 libkleo4 libkmanagesieve4 libkmediaplayer4 libknewstuff3-4 libknotifyconfig4 libkolab0 libkonq-common libkonq5abi1 libkontactinterface4 libkparts4 libkpimidentities4 libkpimtextedit4 libkpimutils4 libkprintutils4 libksieveui4 libktexteditor4 libktnef4 libktorrent4 libkworkspace4abi2 libkxmlrpcclient4 libmailcommon4 libmailimporter4 libmailtransport4 libmessagecomposer4 libmessagecore4 libmessagelist4 libmessageviewer4 libmicroblog4 libnepomuk4 libnepomukcore4abi1 libnepomukquery4a libnepomuksync4 libnepomukutils4 libplasma3 libsoprano4 libtemplateparser4 libvirtodbc0 nepomuk-core odbcinst odbcinst1debian2 plasma-scriptengine-javascript qapt-batch soprano-daemon virtuoso-minimal 0 upgraded, 0 newly installed, 89 to remove and 0 not upgraded. After this operation, 126 MB disk space will be freed. Do you want to continue [Y/n]? Other info: Why do the "iodbc" and "libmyodbc" packages conflict with each other? The root problem is that I need to use a new feature introduced in the latest MySQL Workbench builds (DB Migration) which uses odbc for that matter. Here is what Mysql doc says about it : Linux The Migration Wizard uses iODBC as a driver manager for all of its ODBC connections in Linux. This may give you some troubles because most Linux distributions provide ODBC drivers compiled against unixODBC. This is another driver manager not supported by MySQL Workbench so you won’t be able to use those drivers unless you compile them against iODBC. Here’s what you should do. Make sure that you have iODBC installed. If you are using Debian, Ubuntu or another Debian based distro, type this command in your terminal: $ sudo apt-get install iodbc libiodbc2-dev libpq-dev libssl-dev For RPM based distros (RedHat, Fedora, etc.) type this command instead of the previous one: $ sudo yum install iodbc iodbc-dev libpqxx-devel openssl-devel Now we need to install the PostgreSQL ODBC drivers. Download the psqlODBC source tarball from here. Use the latest version available for download. As of this writing the latest version corresponds to the file psqlodbc-09.01.0200.tar.gz. Extract this tarball to a directory in your hard drive and open a terminal and cd into that directory. Type this in the terminal window: $ ./configure --with-iodbc --enable-pthreads $ make $ sudo make install Verify that you have the file psqlodbcw.so in the /usr/local/lib directory. This package seems to pose the problem probably: dpkg -s odbcinst1debian2 Package: odbcinst1debian2 Status: install ok installed Priority: optional Section: libs Installed-Size: 241 Maintainer: Ubuntu Developers <[email protected]> Architecture: amd64 Multi-Arch: same Source: unixodbc Version: 2.2.14p2-5ubuntu4 Replaces: unixodbc (<< 2.1.1-2) Depends: libc6 (>= 2.14), libltdl7 (>= 2.4.2), odbcinst Pre-Depends: multiarch-support Breaks: libiodbc2, libmyodbc (<< 5.1.6-2), odbc-postgresql (<< 1:09.00.0310-1.1), tdsodbc (<< 0.82-8) Conflicts: odbcinst1, odbcinst1debian1 Description: Support library for accessing odbc ini files This package contains the libodbcinst library from unixodbc, a library used by ODBC drivers for reading their configuration settings from /etc/odbc.ini and ~/.odbc.ini. . Also contained in this package are the driver setup plugins, which describe the features supported by individual ODBC drivers. Homepage: http://www.unixodbc.org/ Original-Maintainer: Steve Langasek <[email protected]> I have no broken packages:

  Read the article

• Trace File Source Adapter

  The Trace File Source adapter is a useful addition to your SSIS toolbox.  It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow.  From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses  some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml  - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml    - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

  Read the article

• Basic shadow mapping fails on NVIDIA card?

  - by James

  Recently I switched from an AMD Radeon HD 6870 card to an (MSI) NVIDIA GTX 670 for performance reasons. I found however that my implementation of shadow mapping in all my applications failed. In a very simple shadow POC project the problem appears to be that the scene being drawn never results in a draw to the depth map and as a result the entire depth map is just infinity, 1.0 (Reading directly from the depth component after draw (glReadPixels) shows every pixel is infinity (1.0), replacing the depth comparison in the shader with a comparison of the depth from the shadow map with 1.0 shadows the entire scene, and writing random values to the depth map and then not calling glClear(GL_DEPTH_BUFFER_BIT) results in a random noisy pattern on the scene elements - from which we can infer that the uploading of the depth texture and comparison within the shader are functioning perfectly.) Since the problem appears almost certainly to be in the depth render, this is the code for that: const int s_res = 1024; GLuint shadowMap_tex; GLuint shadowMap_prog; GLint sm_attr_coord3d; GLint sm_uniform_mvp; GLuint fbo_handle; GLuint renderBuffer; bool isMappingShad = false; //The scene consists of a plane with box above it GLfloat scene[] = { -10.0, 0.0, -10.0, 0.5, 0.0, 10.0, 0.0, -10.0, 1.0, 0.0, 10.0, 0.0, 10.0, 1.0, 0.5, -10.0, 0.0, -10.0, 0.5, 0.0, -10.0, 0.0, 10.0, 0.5, 0.5, 10.0, 0.0, 10.0, 1.0, 0.5, ... }; //Initialize the stuff used by the shadow map generator int initShadowMap() { //Initialize the shadowMap shader program if (create_program("shadow.v.glsl", "shadow.f.glsl", shadowMap_prog) != 1) return -1; const char* attribute_name = "coord3d"; sm_attr_coord3d = glGetAttribLocation(shadowMap_prog, attribute_name); if (sm_attr_coord3d == -1) { fprintf(stderr, "Could not bind attribute %s\n", attribute_name); return 0; } const char* uniform_name = "mvp"; sm_uniform_mvp = glGetUniformLocation(shadowMap_prog, uniform_name); if (sm_uniform_mvp == -1) { fprintf(stderr, "Could not bind uniform %s\n", uniform_name); return 0; } //Create a framebuffer glGenFramebuffers(1, &fbo_handle); glBindFramebuffer(GL_FRAMEBUFFER, fbo_handle); //Create render buffer glGenRenderbuffers(1, &renderBuffer); glBindRenderbuffer(GL_RENDERBUFFER, renderBuffer); //Setup the shadow texture glGenTextures(1, &shadowMap_tex); glBindTexture(GL_TEXTURE_2D, shadowMap_tex); glTexImage2D(GL_TEXTURE_2D, 0, GL_DEPTH_COMPONENT, s_res, s_res, 0, GL_DEPTH_COMPONENT, GL_FLOAT, NULL); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); return 0; } //Delete stuff void dnitShadowMap() { //Delete everything glDeleteFramebuffers(1, &fbo_handle); glDeleteRenderbuffers(1, &renderBuffer); glDeleteTextures(1, &shadowMap_tex); glDeleteProgram(shadowMap_prog); } int loadSMap() { //Bind MVP stuff glm::mat4 view = glm::lookAt(glm::vec3(10.0, 10.0, 5.0), glm::vec3(0.0, 0.0, 0.0), glm::vec3(0.0, 1.0, 0.0)); glm::mat4 projection = glm::ortho<float>(-10,10,-8,8,-10,40); glm::mat4 mvp = projection * view; glm::mat4 biasMatrix( 0.5, 0.0, 0.0, 0.0, 0.0, 0.5, 0.0, 0.0, 0.0, 0.0, 0.5, 0.0, 0.5, 0.5, 0.5, 1.0 ); glm::mat4 lsMVP = biasMatrix * mvp; //Upload light source matrix to the main shader programs glUniformMatrix4fv(uniform_ls_mvp, 1, GL_FALSE, glm::value_ptr(lsMVP)); glUseProgram(shadowMap_prog); glUniformMatrix4fv(sm_uniform_mvp, 1, GL_FALSE, glm::value_ptr(mvp)); //Draw to the framebuffer (with depth buffer only draw) glBindFramebuffer(GL_FRAMEBUFFER, fbo_handle); glBindRenderbuffer(GL_RENDERBUFFER, renderBuffer); glBindTexture(GL_TEXTURE_2D, shadowMap_tex); glFramebufferTexture2D(GL_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, GL_TEXTURE_2D, shadowMap_tex, 0); glDrawBuffer(GL_NONE); glReadBuffer(GL_NONE); GLenum result = glCheckFramebufferStatus(GL_FRAMEBUFFER); if (GL_FRAMEBUFFER_COMPLETE != result) { printf("ERROR: Framebuffer is not complete.\n"); return -1; } //Draw shadow scene printf("Creating shadow buffers..\n"); int ticks = SDL_GetTicks(); glClear(GL_DEPTH_BUFFER_BIT); //Wipe the depth buffer glViewport(0, 0, s_res, s_res); isMappingShad = true; //DRAW glEnableVertexAttribArray(sm_attr_coord3d); glVertexAttribPointer(sm_attr_coord3d, 3, GL_FLOAT, GL_FALSE, 5*4, scene); glDrawArrays(GL_TRIANGLES, 0, 14*3); glDisableVertexAttribArray(sm_attr_coord3d); isMappingShad = false; glBindFramebuffer(GL_FRAMEBUFFER, 0); printf("Render Sbuf in %dms (GLerr: %d)\n", SDL_GetTicks() - ticks, glGetError()); return 0; } This is the full code for the POC shadow mapping project (C++) (Requires SDL 1.2, SDL-image 1.2, GLEW (1.5) and GLM development headers.) initShadowMap is called, followed by loadSMap, the scene is drawn from the camera POV and then dnitShadowMap is called. I followed this tutorial originally (Along with another more comprehensive tutorial which has disappeared as this guy re-configured his site but used to be here (404).) I've ensured that the scene is visible (as can be seen within the full project) to the light source (which uses an orthogonal projection matrix.) Shader utilities function fine in non-shadow-mapped projects. I should also note that at no point is the GL error state set. What am I doing wrong here and why did this not cause problems on my AMD card? (System: Ubuntu 12.04, Linux 3.2.0-49-generic, 64 bit, with the nvidia-experimental-310 driver package. All other games are functioning fine so it's most likely not a card/driver issue.)

  Read the article

• How to UEFI install Ubuntu 12.10?

  - by Geezanansa

  Running a newer FM1 motherboard which is using an AMD 3870k APU with a new 1TB HDD. Following the advice in the motherboard manual and https://help.ubuntu.com/community/UEFI have now got to grub option screen for UEFI install. see http://imgur.com/VW5vz The dvd.iso being used is Ubuntu 12.10 desktop amd64 from ubuntu .com. The hdd has had a gpt partition table made for, by using gparted when in a live desktop session when booted in bios mode. (*edit/update: Although the old cd updates on running it is an old kernel and it did make a gpt but that version of gparted uses fdisk whereas gdisk is required to make gpt. Think am going to have to spend more time here http://www.dedoimedo.com/computers/gparted.html lol Using the gparted from 12.10 live session to make partitions; following the guidance regarding this at https://help.ubuntu.com/community/UEFI#Creating_an_EFI_partition, but can only boot to grub option screen http://imgur.com/VW5vz when 12.10 options to "try ubuntu" or "install ubuntu" are selected they give errors as described below*) but after making the gpt decided to leave it unformatted/unallocated space with the intention of using installer to set up partitions. update-originally but gparted now sees hdd as http://imgur.com/hFIvm as described above. *Booting live dvd in EFI mode gives "Secure Boot not installed" just before grub kernel option list with the option to "install ubuntu" but get "can not read cd/0" and "the kernel must be loaded first" errors; when that option is selected. Any pointers on how to get installer going for UEFI install would be good. Thanks in advance. update: Hopefully these screenshots can help better highlight where i am going wrong or if there is something else going on http://imgur.com/g30RB, http://imgur.com/VW5vz, http://imgur.com/31E0q, http://imgur.com/bnuaG, http://imgur.com/y4KGu, http://imgur.com/3u2QE, http://imgur.com/n9lN3, http://imgur.com/FEKvz, http://imgur.com/hFIvm, update: Thank you fernando garcia for pointing me in the right direction to start the process of elimantion. What i have done since asking question is a little home work starting here http://askubuntu.com/faq#bounty and here http://askubuntu.com/questions/how-to-ask. Looking at other similar questions was good fun and found this 12.10 UEFI Secure Boot install the most relative in helping getting ubuntu to uefi install on my system. In response to wolverine's question this article was referred to http://web.dodds.net/~vorlon/wiki/blog/SecureBoot_in_Ubuntu_12.10/ This article in the first sentence gives a link to http://www.ubuntu.com/download which is where i downloaded the 12.10 desktop amd64 .iso(and others) but have been unable to do a efi install of ubuntu on this system and as this is a new system have ended up just going with bios installer running which at least puts my mind at ease that i have not bricked my new mobo.(had to do a clrcmos and flash to latest bios version) So it possibly could be the bios settings or the bios version being used that is problem. To try and eliminate bios version i can not get to post screen in order to id bios version being used. Pressing tab to show post instead of logo and trying to pausebreak to catch post is proving difficult. If logo screen in bios is disabled just get black screen no post shown and pressing tab does not show post. Appreciate using appropriate bios settings and latest 12.10 release should simply get uefi installer running when selected from the grub list (nice graphic details in Identifying if computer boots the cd in efi mode section at https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_CD_in_EFI_mode) And to confirm the hdd is booting in efi mode https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_HDD_in_EFI_mode running the command [ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD" gave Legacy boot on HDD This is as expected because i allowed the bios installer (which was 12.04 desktop amd64 after trying 12.10 desktop amd64 in efi mode) to run to get a working installation. Which is not what was intended or wished for but wanted to get a working os to bench test new mobo i.e. prove it is working. There are other options as in installing other bootmanagers/loaders but do not wish to do so as shim should get grub2 going that is after secure boot has been signed.(Now got rough idea what should happen just it aint happening. Is it possible ahci drivers are required?) Will post boot info script url of the updated config/setup. The original question asked seems irrelevant to what is being said in this update but as the problem is not resolved will keep on trying efi installing! i.e the problem is same as when question asked just trying to update. Have tried to edit and update the best i can!

  Read the article

• A new SQL, a new Analysis Services, a new Workshop! #ssas #sql2012

  - by Marco Russo (SQLBI)

  One week ago Microsoft SQL Server 2012 finally debuted with a virtual launch event and you can find many intro sessions there (20 minutes each). There is a lot of new content available if you want to learn more about SQL 2012 and in this blog post I’d like to provide a few link to sessions, documents, bits and courses that are available now or very soon. First of all, the release of Analysis Services 2012 has finally released PowerPivot 2012 (many of us called it PowerPivot v2 before this official name) and also the new Data Mining Add-in for Microsoft Office 2010, now available also for Excel 64bit! And, of course, don’t miss the Microsoft SQL Server 2012 Feature Pack, there are a lot of upgrades for both DBAs and developers. I just discovered there is a new LocalDB version of SQL Express that can run in user mode without any setup. Is this the end of SQL CE? But now, back to Analysis Services: if you want some tutorial on Tabular, the Microsoft Virtual Academy has a whole track dedicated to Analysis Services 2012 but you will probably be interested also in the one about Reporting Services 2012. If you think that virtual is good but it’s not enough, there are plenty of conferences in the coming months – these are just those where I and Alberto will deliver some SSAS Tabular presentations: SQLBits X, London, March 29-31, 2012: if you are in London or want a good reason to go, this is the most important SQL Server event in Europe this year, no doubts about it. And not only because of the high number of attendees, but also because there is an impressive number of speakers (excluding me, of course) coming from all over the world. This is an event second only to PASS Summit in Seattle so there are no good reasons to not attend it. Microsoft SQL Server & Business Intelligence Conference 2012, Milan, March 28-29, 2012: this is an Italian conference so the language might be a barrier, but many of us also speak English and the food is good! Just a few seats still available. TechEd North America, Orlando, June 11-14, 2012: you know, this is a big event and it contains everything – if you want to spend a whole day learning the SSAS Tabular model with me and Alberto, don’t miss our pre-conference day “Using BISM Tabular in Microsoft SQL Server Analysis Services 2012” (be careful, it is on June 10, a nice study-Sunday!). TechEd Europe, Amsterdam, June 26-29, 2012: the European version of TechEd provides almost the same content and you don’t have to go overseas. We also run the same pre-conference day “Using BISM Tabular in Microsoft SQL Server Analysis Services 2012” (in this case, it is on June 25, that’s a regular Monday). I and Alberto will also speak at some user group meeting around Europe during… well, we’re going to travel a lot in the next months. In fact, if you want to get a complete training on SSAS Tabular, you should spend two days with us in one of our SSAS Tabular Workshop! We prepared a 2-day seminar, a very intense one, that start from the simple tabular modeling and cover architecture, DAX, query, advanced modeling, security, deployment, optimization, monitoring, relationships with PowerPivot and Multidimensional… Really, there are a lot of stuffs here! We announced the first dates in Europe and also an online edition optimized for America’s time zone: Apr 16-17, 2012 – Amsterdam, Netherlands Apr 26-27, 2012 – Copenhagen, Denmark May 7-8, 2012 – Online for America’s time zone May 14-15, 2012 – Brussels, Belgium May 21-22, 2012 – Oslo, Norway May 24-25, 2012 – Stockholm, Sweden May 28-29, 2012 – London, United Kingdom May 31-Jun 1, 2012 – Milan, Italy (Italian language) Also Chris Webb will join us in this workshop and in every date you can find who is the speaker on the web site. The course is based on our upcoming book, almost 600 pages (!) about SSAS Tabular, an incredible effort that will be available very soon in a preview (rough cuts from O’Reilly) and will be on the shelf in May. I will provide a link to order it as soon as we have one! And if you think that this is not enough… you’re right! Do you know what is the only thing you can do to optimize your Tabular model? Optimize your DAX code. Learning DAX is easy, mastering DAX requires some knowledge… and our DAX Advanced Workshop will provide exactly the required content. Public classes will be available later this year, by now we just deliver it on demand.

  Read the article

• ORA-7445 Troubleshooting

  - by [email protected]

      QUICKLINK: Note 153788.1 ORA-600/ORA-7445 Lookup tool Note 1082674.1 : A Video To Demonstrate The Usage Of The ORA-600/ORA-7445 Lookup Tool [Video]   Have you observed an ORA-07445 error reported in your alert log? While the ORA-600 error is "captured" as a handled exception in the Oracle source code, the ORA-7445 is an unhandled exception error due to an OS exception which should result in the creation of a core file.  An ORA-7445 is a generic error, and can occur from anywhere in the Oracle code. The precise location of the error is identified by the core file and/or trace file it produces.  Looking for the best way to diagnose? Whenever an ORA-7445 error is raised a core file is generated.  There may be a trace file generated with the error as well.   Prior to 11g, the core files are located in the CORE_DUMP_DEST directory.   Starting with 11g, there is a new advanced fault diagnosability infrastructure to manage trace data.  Diagnostic files are written into a root directory for all diagnostic data called the ADR home.   Core files at 11g will go to the ADR HOME/cdump directory.   For more information on the Oracle 11g Diagnosability feature see Note 453125.1 11g Diagnosability Frequently Asked Questions Note 443529.1 11g Quick Steps to Package and Send Critical Error Diagnostic Information to Support[Video]   NOTE:  While the core file is captured in the Diagnosability infrastructure, the file may not be included with a diagnostic package.1.  Check the Alert LogThe alert log may indicate additional errors or other internal errors at the time of the problem.   In some cases, the ORA-7445 error will occur along with ORA-600, ORA-3113, ORA-4030 errors.  The ORA-7445 error can be side effects of the other problems and you should review the first error and associated core file or trace file and work down the list of errors.   Note 1020463.6 DIAGNOSING ORA-3113 ERRORS Note 1812.1 TECH:  Getting a Stack Trace from a CORE file Note 414966.1 RDA Documentation Index   If the ORA-7445 errors are not associated with other error conditions, ensure the trace data is not truncated. If you see a message at the end of the file   "MAX DUMP FILE SIZE EXCEEDED"   the MAX_DUMP_FILE_SIZE parameter is not setup high enough or to 'unlimited'. There could be vital diagnostic information missing in the file and discovering the root issue may be very difficult.  Set the MAX_DUMP_FILE_SIZE appropriately and regenerate the error for complete trace information. For pointers on deeper analysis of these errors see   Note 390293.1 Introduction to 600/7445 Internal Error Analysis Note 211909.1 Customer Introduction to ORA-7445 Errors 2.  Search 600/7445 Lookup Tool Visit My Oracle Support to access the ORA-00600 Lookup tool (Note 153788.1). The ORA-600/ORA-7445 Lookup tool may lead you to applicable content in My Oracle Support on the problem and can be used to investigate the problem with argument data from the error message or you can pull out key stack pointers from the associated trace file to match up against known bugs.3.  "Fine tune" searches in Knowledge Base As the ORA-7445 error indicates an unhandled exception in the Oracle source code, your search in the Oracle Knowledge Base will need to focus on the stack data from the core file or the trace file. Keep in mind that searches on generic argument data will bring back a large result set.  The more you can learn about the environment and code leading to the errors, the easier it will be to narrow the hit list to match your problem. Note 153788.1 ORA-600/ORA-7445 TroubleshooterNote 1082674.1 A Video To Demonstrate The Usage Of The ORA-600/ORA-7445 Lookup Tool [Video] NOTE:  If no trace file is captured, see Note 1812.1 TECH:  Getting a Stack Trace from a CORE file.  Core files are managed through 11g Diagnosability, but are not packaged with other diagnostic data automatically.  The core files can be quite large, but may be useful during analysis within Oracle Support.4.  If assistance is required from Oracle Should it become necessary to get assistance from Oracle Support on an ORA-7445 problem, please provide at a minimum, the Alert log  Associated tracefile(s) or incident package at 11g Patch level  information Core file(s)  Information about changes in configuration and/or application prior to  issues  If error is reproducible, a self-contained reproducible testcase: Note.232963.1 How to Build a Testcase for Oracle Data Server Support to Reproduce ORA-600 and ORA-7445 Errors RDA report or Oracle Configuration Manager information Oracle Configuration Manager Quick Start Guide Note 548815.1 My Oracle Support Configuration Management FAQ Note 414966.1 RDA Documentation Index ***For reference to the content in this blog, refer to Note.1092832.1 Master Note for Diagnosing ORA-600

  Read the article

< Previous Page | 571 572 573 574 575 576 577 578 579 580 581 582  | Next Page >