Search Results

Search found 32130 results on 1286 pages for 'local search'.

Page 575/1286 | < Previous Page | 571 572 573 574 575 576 577 578 579 580 581 582  | Next Page >

  • delayed evaluation of code in subroutines - 5.8 vs. 5.10 and 5.12

    - by Brock
    This bit of code behaves differently under perl 5.8 than it does under perl 5.12: my $badcode = sub { 1 / 0 }; print "Made it past the bad code.\n"; [brock@chase tmp]$ /usr/bin/perl -v This is perl, v5.8.8 built for i486-linux-gnu-thread-multi [brock@chase tmp]$ /usr/bin/perl badcode.pl Illegal division by zero at badcode.pl line 1. [brock@chase tmp]$ /usr/local/bin/perl -v This is perl 5, version 12, subversion 0 (v5.12.0) built for i686-linux [brock@chase tmp]$ /usr/local/bin/perl badcode.pl Made it past the bad code. Under perl 5.10.1, it behaves as it does under 5.12: brock@laptop:/var/tmp$ perl -v This is perl, v5.10.1 (*) built for i486-linux-gnu-thread-multi brock@laptop:/var/tmp$ perl badcode.pl Made it past the bad code. I get the same results with a named subroutine, e.g. sub badcode { 1 / 0 } I don't see anything about this in the perl5100delta pod. Is this an undocumented change? A unintended side effect of some other change? (For the record, I think 5.10 and 5.12 are doing the Right Thing.)

    Read the article

  • How can I remove duplicate nodes in XQuery?

    - by Brabster
    I have an XML document I generate on the fly, and I need a function to eliminate any duplicate nodes from it. My function looks like: declare function local:start2() { let $data := local:scan_books() return <books>{$data}</books> }; Sample output is: <books> <book> <title>XML in 24 hours</title> <author>Some Guy</author> </book> <book> <title>XML in 24 hours</title> <author>Some Guy</author> </book> </books> I want just the one entry in my books root tag, and there are other tags, like say pamphlet in there too that need to have duplicates removed. Any ideas? Updated following comments. By unique nodes, I mean remove multiple occurrences of nodes that have the exact same content and structure.

    Read the article

  • Qmake does not specify a valid qt

    - by Comptrol
    After installing Qt SDK for Open Source C++ development on Mac OS by following the respective steps Note for the binary package: If you have the binary package, simply double-click on the Qt.mpkg and follow the instructions to install Qt. . Yes, that is all I have done to install Qt on MacOsX. Everything was going fine, until I run a sample application, of which compile output resulted in: No valid Qt version set. Set one in Preferences Error while building project qtilk When executing build step 'QMake' Canceled build. Then I tried to change the respective Qt version in Preferences and I hovered over the Path, I realized my mkspec isn't set: Then I tried querying qmake by qmake -query : QT_INSTALL_PREFIX:/ QT_INSTALL_DATA:/usr/local/Qt4.6 QT_INSTALL_DOCS:/Developer/Documentation/Qt QT_INSTALL_HEADERS:/usr/include QT_INSTALL_LIBS:/Library/Frameworks QT_INSTALL_BINS:/Developer/Tools/Qt QT_INSTALL_PLUGINS:/Developer/Applications/Qt/plugins QT_INSTALL_TRANSLATIONS:/Developer/Applications/Qt/translations QT_INSTALL_CONFIGURATION:/Library/Preferences/Qt QT_INSTALL_EXAMPLES:/Developer/Examples/Qt/ QT_INSTALL_DEMOS:/Developer/Examples/Qt/Demos QMAKE_MKSPECS:/usr/local/Qt4.6/mkspecs QMAKE_VERSION:2.01a QT_VERSION:4.6.2 QMAKE_MKSPECS seems to be set here?? Will setting my mkspec solve my building problem? I tried setting by typing export mkspec=macx-g++. Still, mkspec seems not to be set to anything. I am all ears waiting for your answers. Thanks in advance.

    Read the article

  • jQuery find value then replace SRC

    - by Charles Web Dev
    Hello all, Can anyone see anything that is wrong with this code it just isn't working... I am tring to: get the value of #product-variants-option-0 search #preload for the relevant image and then change div.image img src to that image jQuery(document).ready(function($) { $('#product-variants-option-0').change(function() { // What is the sku of the current variant selection. var select_value = $(this).find(':selected').val(); if (select_value == "Kelly Green") { var keyword = "kly"; }; var new_src = $('#preload img[src*=keyword]'); $('div.image img').attr('src', new_src); }); }); The selection: <select class="single-option-selector-0" id="product-variants-option-0"> <option value="Kelly Green">Kelly Green</option> <option value="Navy">Navy</option> <option value="Olive">Olive</option> <option value="Cocoa">Cocoa</option> </select> I'm trying to search an unordered list: <ul id="preload" style="display:none;"> <li><img src="0z-kelly-green-medium.jpg"/></li> <li><img src="0z-olive-medium.jpg"/></li> </ul> The image I'm trying to replace is this:

    Read the article

  • How to assign Image Uri in a custom Control.

    - by Subhen
    Hi, I want to place an image inside my custom control , so my generic.xaml looks like below: <Style TargetType="local:generic"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="local:generic"> <Grid Background="{TemplateBinding Background}"> <Rectangle> <Rectangle.Fill> <SolidColorBrush x:Name="BackgroundBrush" Opacity="0" /> </Rectangle.Fill> </Rectangle> <TextBlock Text="{TemplateBinding Text}" HorizontalAlignment="Center" VerticalAlignment="Center" Foreground="{TemplateBinding Foreground}"/> <Image Source="{TemplateBinding Source}" HorizontalAlignment="Center" VerticalAlignment="Center"/> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style> My Codebehind is as follows: public class Generic : Control { public static DependencyProperty ImageUri = DependencyProperty.Register("Source", typeof(Uri), typeof(generic), new PropertyMetadata("")); public Uri Source { get { return (Uri)GetValue(generic.ImageUri); } set { SetValue(generic.ImageUri, value); } } public generic() { this.DefaultStyleKey = typeof(generic); } } Apllication is compiling fine but while I am trying to run it throws the following exception : $exception {System.Windows.Markup.XamlParseException: System.TypeInitializationException: The type initializer for 'testCstmCntrl.themes.generic' threw an exception. ---> System.ArgumentException: Default value type does not match type of property. Thanks, Subhen

    Read the article

  • Error Message, "The Controls collection cannot be modified because the control contains code blocks"

    - by Gogster
    I'm receiving this error on a page that previously worked fine, in fact the only change I've made to the page recently was to add another asp:TextBox and asp:RequiredFieldValidator control. The page already had numerous ASP.NET controls on it, so I cannot see why these extra controls would make a difference, anyway I shall post the code below and hopefully you can see what the error is: <%@ Control Language="C#" AutoEventWireup="true" CodeFile="MeetingGenerator.ascx.cs" Inherits="usercontrols_MeetingGenerator" %> <%@ Register TagPrefix="cc1" Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" %> <asp:ScriptManager ID="ScriptManager1" runat="server"></asp:ScriptManager> <div style="width:498px;height:425px;background-color:#033b2a;text-align:center;padding-top:20px;"> <asp:Label ID="lblDone" CssClass="done" runat="server"></asp:Label> <asp:Panel id="pnlAddReport" runat="server"> <div> <img src="../images/banners/add-meeting.png" alt="Add Report" /> </div> <p> <asp:ValidationSummary ID="ValidationSummary" CssClass="validationsummary" runat="server" /> <asp:TextBox ID="txtTitle" BorderStyle="None" CssClass="watermark" Width="250px" Height="22px" runat="server"></asp:TextBox> <cc1:TextBoxWatermarkExtender ID="TextBoxWatermarkExtender1" TargetControlID="txtTitle" WatermarkCssClass="watermark" WatermarkText=" Meeting title" runat="server"></cc1:TextBoxWatermarkExtender> <asp:RequiredFieldValidator ID="rfvTitle" ControlToValidate="txtTitle" Text="" ErrorMessage="Please enter the title" Display="None" InitialValue="" runat="server"></asp:RequiredFieldValidator> <asp:RequiredFieldValidator ID="rfvTitle1" ControlToValidate="txtTitle" Text="" ErrorMessage="Please enter the title" Display="None" InitialValue=" Meeting title" runat="server"></asp:RequiredFieldValidator> </p> <p> <asp:TextBox ID="txtDate" BorderStyle="None" CssClass="watermark" Width="250px" Height="22px" runat="server"></asp:TextBox> <cc1:CalendarExtender ID="ceDate" TargetControlID="txtDate" Format="dd/MM/yyyy" runat="server"> </cc1:CalendarExtender> <cc1:TextBoxWatermarkExtender ID="TextBoxWatermarkExtender2" TargetControlID="txtDate" WatermarkCssClass="watermark" WatermarkText=" Meeting Date" runat="server"></cc1:TextBoxWatermarkExtender> <asp:RequiredFieldValidator ID="rfvDate" ControlToValidate="txtDate" Text="" ErrorMessage="Please select the meeting date" Display="None" InitialValue="" runat="server"></asp:RequiredFieldValidator> <asp:RequiredFieldValidator ID="rfvDate1" ControlToValidate="txtDate" Text="" ErrorMessage="Please select the meeting date" Display="None" InitialValue=" Meeting Date" runat="server"></asp:RequiredFieldValidator> </p> <p> <asp:TextBox ID="txtMeetingTime" BorderStyle="None" Width="250px" Height="22px" MaxLength="5" runat="server"></asp:TextBox> <cc1:TextBoxWatermarkExtender ID="tweMeetingTime" TargetControlID="txtMeetingTime" WatermarkCssClass="watermark" WatermarkText=" Time (HH:MM)" runat="server"></cc1:TextBoxWatermarkExtender> <asp:RequiredFieldValidator ID="RequiredFieldValidator1" ControlToValidate="txtMeetingTime" Text="" ErrorMessage="Please enter the meeting time" Display="None" InitialValue="" runat="server"></asp:RequiredFieldValidator> <asp:RequiredFieldValidator ID="RequiredFieldValidator11" ControlToValidate="txtMeetingTime" Text="" ErrorMessage="Please enter the meeting time" Display="None" InitialValue=" Time (HH:MM)" runat="server"></asp:RequiredFieldValidator> </p> <p> <asp:TextBox ID="txtLocation" BorderStyle="None" CssClass="watermark" Width="250px" Height="22px" runat="server"></asp:TextBox> <cc1:TextBoxWatermarkExtender ID="TextBoxWatermarkExtender3" TargetControlID="txtLocation" WatermarkCssClass="watermark" WatermarkText=" Location" runat="server"></cc1:TextBoxWatermarkExtender> <asp:RequiredFieldValidator ID="rfvLocation" ControlToValidate="txtLocation" Text="" ErrorMessage="Please enter the location" Display="None" InitialValue="" runat="server"></asp:RequiredFieldValidator> <asp:RequiredFieldValidator ID="rfvLocation1" ControlToValidate="txtLocation" Text="" ErrorMessage="Please enter the location" Display="None" InitialValue=" Location" runat="server"></asp:RequiredFieldValidator> </p> <p> <asp:ImageButton ID="btnAddMeeting" ImageUrl="/images/buttons/addmeeting-btn.gif" runat="server" OnClick="btnAddMeeting_Click" /> </p> <p> </p> </asp:Panel> </div> <%@ Master Language="C#" MasterPageFile="/masterpages/Master.master" AutoEventWireup="true" %> <asp:content ContentPlaceHolderId="additionalhead" runat="server"> </asp:content> <asp:content ContentPlaceHolderId="additionalbody" runat="server"> <umbraco:Macro Alias="AddMeeting" runat="server"></umbraco:Macro> </asp:content> <asp:content ContentPlaceHolderId="bodyContent" runat="server"> </asp:content> <%@ Master Language="C#" AutoEventWireup="true" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title><umbraco:Item field="title" runat="server"></umbraco:Item></title> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js"></script> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/jquery-ui.min.js"></script> <script type="text/javascript" src="/js/jQueryString-2.0.2-Min.js"></script> <link rel="stylesheet" type="text/css" href="/css/Styles.css" /> <link rel="stylesheet" type="text/css" href="/css/Layout.css" /> <link rel="stylesheet" type="text/css" href="/css/Forms.css" /> <script type="text/javascript" language="javascript"> $(document).ready(function () { $('#uploadAgenda').hide(); $('#uploadMinutes').hide(); $('#<%=txtSearchEAA.ClientID%>').val('Search EAA'); var st = $.getQueryString({ ID:"search" }); if (st != '') { $('#<%=txtSearchEAA.ClientID%>').val(st); }; $('#<%=txtSearchEAA.ClientID%>').click(function() { $('#<%=txtSearchEAA.ClientID%>').val(''); }); }); </script> <script type="text/C#" runat="server"> protected void btnSearch_Click(object sender, EventArgs e) { Response.Redirect("/members/search-results?search=" + txtSearchEAA.Text); } </script> <asp:ContentPlaceHolder id="additionalhead" runat="server"></asp:ContentPlaceHolder> <umbraco:Item field="AdditionalHead" runat="server"></umbraco:Item> </head> <body style="background-color:#e5e5e5;"> <script runat="server"> protected void btnLogout_Click(object sender, EventArgs e) { FormsAuthentication.SignOut(); Response.Redirect("/login"); } </script> <form id="form1" runat="server"> <asp:ContentPlaceHolder id="additionalbody" runat="server"></asp:ContentPlaceHolder> <div class="wrapper"> <div class="content"> <div class="banner"> <div class="bannerSearchSpacer"> <a href="/home"><h1><span>EAA</span></h1></a> </div> <div class="aboutEAA"> &nbsp; </div> <div class="bannerSearchAligns"> <div class="searchbox"> <asp:TextBox ID="txtSearchEAA" CssClass="watermark" Width="155px" runat="server"></asp:TextBox> </div> <div class="searchButton"> <asp:ImageButton ID="imbSearch" ImageUrl="/images/buttons/go.gif" OnClick="btnSearch_Click" runat="server" /> </div> <div style="clear:both;"></div> </div> <div class="loginBox"> <dl> <dt>Hello</dt> <dd><umbraco:Macro Alias="MemberName" runat="server"></umbraco:Macro></dd> <dt>Arena</dt> <dd><umbraco:Macro Alias="MemberArena" runat="server"></umbraco:Macro></dd> </dl> <div><asp:ImageButton ID="btnLogout" ImageUrl="/images/buttons/logout.gif" runat="server" OnClick="btnLogout_Click" /></div> </div> <div style="clear:both;"></div> </div> <div id="contentarea"> <div class="menuLeft"> <div class="menuPlaceholder"> <umbraco:Macro Alias="DynamicMenu" runat="server"></umbraco:Macro> </div> </div> <div class="mainBody"> <asp:ContentPlaceHolder id="bodyContent" runat="server"></asp:ContentPlaceHolder> </div> <div style="clear:both;"></div> </div> </div> </div> </form> <umbraco:Macro Alias="MemberAnalytics" runat="server"></umbraco:Macro> </body> </html>

    Read the article

  • Mode specific key bindings

    - by rejeep
    Hey, I have a minor mode that also comes with a global mode. The mode have some key bindings and I want the user to have the posibility to specify what bindings should work for each mode. (my-minor-mode-bindings-for-mode 'some-mode '(key1 key2 ...)) (my-minor-mode-bindings-for-mode 'some-other-mode '(key3 key4 ...)) So I need some kind of mode/buffer-local key map. Buffer local is a bit problematic since the user can change the major mode. I have tried some solutions of which neither works any good. Bind all possible keys always and when the user types the key, check if the key should be active in that mode. Execute action if true, otherwise fall back. Like the previous case only that no keys are bound. Instead I use a pre command hook and check if the key pressed should do anything. For each buffer update (whatever that means), run a function that first clears the key map and then updates it with the bindings for that particular mode. I have tried these approaches and I found problems with all of them. Do you know of any good way to solve this? Thanks!

    Read the article

  • Windows Forms Event Log

    - by blu
    I am writing to the event log from my Windows Forms application running on Windows 7 and am getting this message in the event log: The description for Event ID X from source Application cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. If the event originated on another computer, the display information had to be saved with the event. The following information was included with the event: Exception Details the message resource is present but the message is not found in the string/message table My logging code is: public void Log(Exception exc) { EventLog.WriteEntry( "Application", exc.ToString(), EventLogEntryType.Error, 100); } My logging on Windows Forms is usually to a DB, but in this case decided to use the event log. I usually use the event log in ASP.NET applications, but those are on XP Pro locally and Windows Server 2003 on the web boxes. Is this a Windows 7 thing or a Windows Forms thing, and what should I do to fix this? Thanks.

    Read the article

  • How to migrate project from RCS to git? (SOLVED)

    - by Norman Ramsey
    I have a 20-year-old project that I would like to migrate from RCS to git, without losing the history. All web pages suggest that the One True Path is through CVS. But after an hour of Googling and trying different scripts, I have yet to find anything that successfully converts my RCS project tree to CVS. I'm hoping the good people at Stackoverflow will know what actually works, as opposed to what is claimed to work and doesn't. (I searched Stackoverflow using both the native SO search and a Google search, but if there's a helpful answer in the database, I missed it.) UPDATE: The rcs-fast-export tool at http://git.oblomov.eu/rcs-fast-export was repaired on 14 April 2009, and this version seems to work for me. This tool converts straight to git with no intermediate CVS. Thanks Giuseppe and Jakub!!! Things that did not work that I still remember: The rcs-to-cvs script that ships in the contrib directory of the CVS sources The rcs-fast-export tool at http://git.oblomov.eu/rcs-fast-export in versions before 13 April 2010 The rcs2cvs script found in a document called "CVS-RCS- HOW-TO Document for Linux"

    Read the article

  • SQL Server - Multi-Column substring matching

    - by hamlin11
    One of my clients is hooked on multi-column substring matching. I understand that Contains and FreeText search for words (and at least in the case of Contains, word prefixes). However, based upon my understanding of this MSDN book, neither of these nor their variants are capable of searching substrings. I have used LIKE rather extensively (Select * from A where A.B Like '%substr%') Sample table A: ID | Col1 | Col2 | Col3 | ------------------------------------- 1 | oklahoma | colorado | Utah | 2 | arkansas | colorado | oklahoma | 3 | florida | michigan | florida | ------------------------------------- The following code will give us row 1 and row 2: select * from A where Col1 like '%klah%' or Col2 like '%klah%' or Col3 like '%klah%' This is rather ugly, probably slow, and I just don't like it very much. Probably because the implementations that I'm dealing with have 10+ columns that need searched. The following may be a slight improvement as code readability goes, but as far as performance, we're still in the same ball park. select * from A where (Col1 + ' ' + Col2 + ' ' + Col3) like '%klah%' I have thought about simply adding insert, update, and delete triggers that simply add the concatenated version of the above columns into a separate table that shadows this table. Sample Shadow_Table: ID | searchtext | --------------------------------- 1 | oklahoma colorado Utah | 2 | arkansas colorado oklahoma | 3 | florida michigan florida | --------------------------------- This would allow us to perform the following query to search for '%klah%' select * from Shadow_Table where searchtext like '%klah%' I really don't like having to remember that this shadow table exists and that I'm supposed to use it when I am performing multi-column substring matching, but it probably yields pretty quick reads at the expense of write and storage space. My gut feeling tells me there there is an existing solution built into SQL Server 2008. However, I don't seem to be able to find anything other than research papers on the subject. Any help would be appreciated.

    Read the article

  • Huge mysql table with Zend Framework

    - by Uffo
    I have a mysql table with over 4 million of data; well the problem is that SOME queries WORK and SOME DON'T it depends on the search term, if the search term has a big volume of data in the table than I get the following error: Fatal error: Allowed memory size of 1048576000 bytes exhausted (tried to allocate 75 bytes) in /home/****/public_html/Zend/Db/Statement/Pdo.php on line 290 I currently have Zend Framework cache for metadata enabled, I have index on all the fields from that table.The site is running on a dedicated server with 2gb of ram. I've also set memory limit to: ini_set("memory_limit","1000M"); Any other things that I can optimize? Those are the types of query that I'm currently using: $do = $this->select() ->where('branche LIKE ?','%'.mysql_escape_string($branche).'%') ->order('premium DESC'); } //For name if(empty($branche) && empty($plz)) { $do = $this->select("MATCH(`name`) AGAINST ('{$theString}') AS score") ->where('MATCH(`name`) AGAINST( ? IN BOOLEAN MODE)', $theString) ->order('premium DESC, score'); } And a few other, but they are pretty much the same. Best Regards

    Read the article

  • Doctrine does not export relation properly

    - by iggnition
    Hi, I've got a MySQL 5.1.41 database which i'm trying to fill with doctrine, but doctrine does not insert the relations correctly. My YAML is: Locatie: connection: doctrine tableName: locatie columns: loc_id: type: integer(4) fixed: false unsigned: false primary: true autoincrement: true org_id: type: integer(4) fixed: false unsigned: false primary: false notnull: false autoincrement: false naam: type: string(30) fixed: false unsigned: false primary: false notnull: true autoincrement: false straat: type: string(30) fixed: false unsigned: false primary: false notnull: true autoincrement: false huisnummer: type: integer(4) fixed: false unsigned: false primary: false notnull: true autoincrement: false huisnummer_achtervoegsel: type: string(3) fixed: false unsigned: false primary: false notnull: false autoincrement: false plaats: type: string(25) fixed: false unsigned: false primary: false notnull: true autoincrement: false postcode: type: string(6) fixed: false unsigned: false primary: false notnull: true autoincrement: false telefoon: type: string(12) fixed: false unsigned: false primary: false notnull: true autoincrement: false opmerking: type: string() fixed: false unsigned: false primary: false notnull: false autoincrement: false inloggegevens: type: string() fixed: false unsigned: false primary: false notnull: false autoincrement: false relations: Organisatie: local: org_id foreign: org_id type: one onDelete: CASCADE onUpdate: CASCADE Organisatie: connection: doctrine tableName: organisatie columns: org_id: type: integer(4) fixed: false unsigned: false primary: true autoincrement: true naam: type: string(30) fixed: false unsigned: false primary: false notnull: true autoincrement: false straat: type: string(30) fixed: false unsigned: false primary: false notnull: true autoincrement: false huisnummer: type: integer(4) fixed: false unsigned: false primary: false notnull: true autoincrement: false huisnummer_achtervoegsel: type: string(3) fixed: false unsigned: false primary: false notnull: false autoincrement: false plaats: type: string(25) fixed: false unsigned: false primary: false notnull: true autoincrement: false postcode: type: string(6) fixed: false unsigned: false primary: false notnull: true autoincrement: false telefoon: type: string(12) fixed: false unsigned: false primary: false notnull: true autoincrement: false opmerking: type: string(255) fixed: false unsigned: false primary: false notnull: false autoincrement: false relations: Locatie: local: org_id foreign: org_id type: many Now if a make an organisation and then create a location which has a foreignkey to organisation everything is fine. but when i try to update the org_id with phpmyadmin i get a contraint error. If i manually set the foreign key to ON_UPDATE CASCADE it does work. Why does doctrine not set this option? I got it to work in Propel, but i really want to use doctrine for this.

    Read the article

  • Which technology is best suited to store and query a huge readonly graph?

    - by asmaier
    I have a huge directed graph: It consists of 1.6 million nodes and 30 million edges. I want the users to be able to find all the shortest connections (including incoming and outgoing edges) between two nodes of the graph (via a web interface). At the moment I have stored the graph in a PostgreSQL database. But that solution is not very efficient and elegant, I basically need to store all the edges of the graph twice (see my question PostgreSQL: How to optimize my database for storing and querying a huge graph). It was suggested to me to use a GraphDB like neo4j or AllegroGraph. However the free version of AllegroGraph is limited to 50 million nodes and also has a very high-level API (RDF), which seems too powerful and complex for my problem. Neo4j on the other hand has only a very low level API (and the python interface is not mature yet). Both of them seem to be more suited for problems, where nodes and edges are frequently added or removed to a graph. For a simple search on a graph, these GraphDBs seem to be too complex. One idea I had would be to "misuse" a search engine like Lucene for the job, since I'm basically only searching connections in a graph. Another idea would be, to have a server process, storing the whole graph (500MB to 1GB) in memory. The clients could then query the server process and could transverse the graph very quickly, since the graph is stored in memory. Is there an easy possibility to write such a server (preferably in Python) using some existing framework? Which technology would you use to store and query such a huge readonly graph?

    Read the article

  • Installing Mercurial on Mac OS X 10.6 Snow Leopard

    - by Matthew Rankin
    Installing Mercurial on Mac OS X 10.6 Snow Leopard I installed Mercurial 1.3.1 on Mac OS X 10.6 Snow Leopard from source using the following: cd ~/src curl -O http://mercurial.selenic.com/release/mercurial-1.3.1.tar.gz tar xzvf mercurial-1.3.1.tar.gz cd mercurial-1.3.1 make ALL sudo make install This installs the site-packages files for Mercurial in /usr/local/lib/python2.6/site-packages/. I know that installing Mercurial from the Mac Disk Image will install the files into /Library/Python/2.6/site-packages/, which is the site-packages directory for the Mac OS X default Python install. I have Python 2.6.2+ installed as a Framework with its site-packages directory in: /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages With Mercurial installed this way, I have to issue: PYTHONPATH=/usr/local/lib/python2.6/site-packages:"${PYTHONPATH}" in order to get Mercurial to work. Questions How can I install Mercurial from source with the site-packages in a different directory? Is there an advantage or disadvantage to having the site-packages in the current location? Would it be better in one of the Python site-package directories that already exist? Do I need to be concerned about virtualenv working correctly since I have modified PYTHONPATH (or any other conflicts for that matter)? Reasons for Installing from Source Dan Benjamin of Hivelogic provides the benefits of and instructions for installing Mercurial from source in his article Installing Mercurial on Snow Leopard.

    Read the article

  • Filter entities that match all pairs

    - by Jon
    I have an entity (let's say Person) with a set of arbitrary attributes with a known subset of values. I need to search for all of these entities that match all my filter conditions. For example, my table structures look like this: Person: id | name 1 | John Doe 2 | Jane Roe 3 | John Smith Attribute: id | attr_name 1 | Sex 2 | Eye Color ValidValue: id | attr_id | value_name 1 | 1 | Male 2 | 1 | Female 3 | 2 | Blue 4 | 2 | Green 5 | 2 | Brown PersonAttributes id | person_id | attr_id | value_id 1 | 1 | 1 | 1 2 | 1 | 2 | 3 3 | 2 | 1 | 2 4 | 2 | 2 | 4 5 | 3 | 1 | 1 6 | 3 | 2 | 4 In JPA, I have entities built for all of these tables. What I'd like to do is perform a search for all entities matching a given set of attribute-value pairs. For instance, I'd like to be able to find all males (John Doe and John Smith), all people with green eyes (Jane Roe or John Smith), or all females with green eyes (Jane Roe). I see that I can already take advantage of the fact that I only really need to match on value_id, since that's already unique and tied to the attr_id. But where can I go from there?

    Read the article

  • Please explain JSONP

    - by Cheeso
    I don't understand jsonp. I understand JSON. I don't understand JSONP. Wikipedia is the top search result for JSONP. It says JSONP or "JSON with padding" is a JSON extension wherein a prefix is specified as an input argument of the call itself. Huh? What call? That doesn't make any sense to me. JSON is a data format. There's no call. The 2nd search result is from some guy named Remy, who writes JSONP is script tag injection, passing the response from the server in to a user specified function. I can sort of understand that, but it's still not making any sense. What is JSONP, why was it created (what problem does it solve), and why would I use it? Addendum: I've updated Wikipedia with a clearer and more thorough description of JSONP, based on jvenema's answer. Thanks, all.

    Read the article

  • How can UISearchDisplayController autorelease cause crash in a different view controller?

    - by Tofrizer
    Hi, I have two view controllers A and B. From A, I navigate to view controller B as follows: // in View Controller A // navigateToB method -(void) navigateToB { BViewController *bViewController = [[BViewController alloc] initWithNibName: @"BView" bundle:nil]; bViewController.bProperty1 = SOME_STRING_CONSTANT; bViewController.title = @"A TITLE OF A VC's CHOOSING"; [self.navigationController pushViewController: bViewController animated:YES]; [bViewController release]; //<----- releasing 0x406c1e0 } In BViewController, the property bPropery1 is defined with copy as below (note, B also contains UITableView and other properties): @property (nonatomic, copy) NSString *bProperty1; Everything appeared to work fine when navigating back and forth between A and B. That is until I added a UISearchDisplayController to the table view contained in BViewController. Now when I navigate out of B, back to A, the app crashes. Stack trace shows what looks the search display controller being autoreleased at time of crash: #0 0x009663a7 in ___forwarding___ #1 0x009426c2 in __forwarding_prep_0___ #2 0x018c8539 in -[UISearchDisplayController _destroyManagedTableView] #3 0x018c8ea4 in -[UISearchDisplayController dealloc] #4 0x00285ce5 in NSPopAutoreleasePool NSZombies shows: -[BViewController respondsToSelector:]: message sent to deallocated instance 0x406c1e0 And malloc history on this points to the bViewController already released in A's navigateToB method above: Call [2] [arg=132]: thread_a065e720 |start ... <snip> ..._sendActionsForEvents:withEvent:] | -[UIControl sendAction:to:forEvent:] | - [UIApplication sendAction:to:from:forEvent:] | -[**AViewController navigateToB**] | +[NSObject alloc] | +[NSObject allocWithZone:] | _internal_class_createInstance | _internal_class_createInstanceFromZone | calloc | malloc_zone_calloc Can someone please give me any ideas on what is happening here? In navigateToB method, once the bViewController is released (after pushViewController), that's should be it for bViewController. Nothing else even knows about it as it is local to the navigateToB method block and it has been released. When navigating from B back to A, nothing is invoked in viewDidLoad, viewWillAppear etc that will re-enter navigateToB. It looks like somehow search display controller has a reference to something in my AViewController and so as it is autoreleased it is taking this "something" down with it but I cannot understand how this is possible, especially as I'm using copy to pass data between A and B. I'm going potty over this. I'm sure this is my mistake somewhere and so I turn to you, Stack Overflow legends for any words of wisdom or advice on how to resolve this. Many Thanks.

    Read the article

  • Google Javascript v8 - multithreading

    - by willem
    Hi guys Suppose I have the following piece of code bool run (void) { HandleScope hande_scope; Handle<String> source; Local<Script> script; Persistent<Context> context; context = Context::New(); Context::Scope context_scope(context); script = Script::Compile("var a = 1; var b = 2;"); Local<Value> result = script->Run(); if (result.IsEmpty()) return false; else return true; } Is it true that one cannot execute this code using multiple threads? It seems like HandleScope is not designed to be used in multithreaded applications. I can use the v8::Locker and v8::Unlocker methodes but that would always give me execution traces as this: t1: a = 1 t1: b = 2 t2: a = 1 t2: b = 2 I hope someone can give me a hint on getting this code multithreaded so that a possible execution trace could like this: t1: a = 1 t2: a = 1 t1: b = 2 t2: b = 2 Thanks already in advance! Willem -- EDIT -- So I guess that this question has no answer :)

    Read the article

  • XML Schema that describes a self-describing XML document

    - by Raegx
    Is it possible to write an XML Schema that describes an XML document that lists a set of elements and then requires other elements on that same XML document to use those values as either attributes and/or sub-elements? Example: define a list of locations, then force location attributes and/or location elements to be of those values. <root> <locations> <location>Home</location> <location>Office</location> <location>School</location> </locations> <addresses> <address location="Home">...</address> <address location="Office">...</address> </addresses> </root> or <root> <locations> <location>Home</location> <location>Office</location> <location>School</location> </locations> <addresses> <address> <location>Home</location> ... </address> <address> <location>Office</location> ... </address> </addresses> </root> I am failing hard at finding the proper way to search for this information. I suspect it is either not possible or I just don't know the right search terms.

    Read the article

  • Exam Questions that use .Demand or .LinkDemand COULD NOT BE ANY MORE CONFUSING OR AMBIGIOUS ????

    - by IbrarMumtaz
    I am 110% sure this is WRONG !!!! Q.12) You develop a library, and want to ensure that the functions in the library cannot be either directly or indirectly invoked by applications that are not running on the local intranet. What attribute would you add to each method? A. [UrlIdentityPermission(SecurityAction.RequestRefuse, Url="http://myintranet")] B. [UrlIdentityPermission(SecurityAction.LinkDemand, Url="http://myintranet")] (correct answer) C. [UrlIdentityPermission(SecurityAction.Demand, Url="http://myintranet")] D. [UrlIdentityPermission(SecurityAction.Assert, Url="http://myintranet")] Explanation Link-Demand should be used as it ensures that all callers in the call stack have the necessary permission. In this case it ensures that all callers in the call stack are on the local intranet. There is an indentical question on Transencer so I already had a clue what was goin but Transcender was much more informative that this drivel as it mentioned class level and not assembly level. It also mentioned that some callers maybe coming externally from the company intranet via authroised and authenticated credentials. With information is easy to see why .Demand on would be wong option to go for? So Transcender was right .... so I thgt fine, that makes sense. With think information still fresh in my brain I had a good idea was was going on in the question. To my surprise .Demand was wrong agin !!!! WHAT? I am really starting to hate this setting now? I cannot be any more p*ssed right now!!! :@ Thanks For Reading, Ibrar

    Read the article

  • Building a python module and linking it against a MacOSX framework

    - by madflo
    I'm trying to build a Python extension on MacOSX 10.6 and to link it against several frameworks (i386 only). I made a setup.py file, using distutils and the Extension object. I order to link against my frameworks, my LDFLAGS env var should look like : LDFLAGS = -lc -arch i386 -framework fwk1 -framework fwk2 As I did not find any 'framework' keyword in the Extension module documentation, I used the extra_link_args keyword instead. Extension('test', define_macros = [('MAJOR_VERSION', '1'), ,('MINOR_VERSION', '0')], include_dirs = ['/usr/local/include', 'include/', 'include/vitale'], extra_link_args = ['-arch i386', '-framework fwk1', '-framework fwk2'], sources = "testmodule.cpp", language = 'c++' ) Everything is compiling and linking fine. If I remove the -framework line from the extra_link_args, my linker fails, as expected. Here is the last two lines produced by a python setup.py build : /usr/bin/g++-4.2 -arch x86_64 -arch i386 -isysroot / -L/opt/local/lib -arch x86_64 -arch i386 -bundle -undefined dynamic_lookup build/temp.macosx-10.6-intel-2.6/testmodule.o -o build/lib.macosx-10.6-intel-2.6/test.so -arch i386 -framework sgdosx -framework srtosx -framework ssvosx -framework stsosx Unfortunately, the .so that I just produced is unable to find several symbols provided by this framework. I tried to check the linked framework with otool. None of them is appearing. $ otool -L test.so test.so: /usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.0.1) There is the output of otool run on a test binary, made with g++ and ldd using the LDFLAGS described at the top of my post. On this example, the -framework did work. $ otool -L vitaosx vitaosx: /Library/Frameworks/sgdosx.framework/Versions/A/sgdosx (compatibility version 1.0.0, current version 1.0.0) /Library/Frameworks/ssvosx.framework/Versions/A/ssvosx (compatibility version 1.0.0, current version 1.0.0) /usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.9.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 125.0.1) May this issue be linked to the "-undefined dynamic_lookup" flag on the linking step ? I'm a little bit confused by the few lines of documentation that I'm finding on Google. Cheers,

    Read the article

  • Problem with DataTrigger binding - setters are not being called

    - by aoven
    I have a Command bound to a Button in XAML. When executed, the command changes a property value on the underlying DataContext. I would like the button's Content to reflect the new value of the property. This works*: <Button Command="{x:Static Member=local:MyCommands.TestCommand}" Content="{Binding Path=TestProperty, Mode=OneWay}" /> But this doesn't: <Button Command="{x:Static Member=local:MyCommands.TestCommand}"> <Button.Style> <Style TargetType="{x:Type Button}"> <Style.Triggers> <DataTrigger Binding="{Binding Path=TestProperty, Mode=OneWay}" Value="True"> <DataTrigger.Setters> <Setter Property="Content" Value="Yes"/> </DataTrigger.Setters> </DataTrigger> <DataTrigger Binding="{Binding Path=TestProperty, Mode=OneWay}" Value="False"> <DataTrigger.Setters> <Setter Property="Content" Value="No"/> </DataTrigger.Setters> </DataTrigger> </Style.Triggers> </Style> </Button.Style> </Button> Why is that? * By "works" I mean the Content gets updated whenever I click the button. TIA

    Read the article

  • Implementing the tree with reference to the root for each leaf

    - by AntonAL
    Hi, i implementing a products catalog, that looks, like this: group 1 subgroup 1 subgroup 2 item 1 item 2 ... item n ... subgroup n group 2 subgroup 1 ... subgroup n group 3 ... group n The Models: class CatalogGroup < ActiveRecord::Base has_many: catalog_items has_many :catalog_items_all, :class_name => "CatalogItem", :foreign_key => "catalog_root_group_id" end class CatalogItem < ActiveRecord::Base belongs_to :catalog_group belongs_to :catalog_root_group, :class_name => "CatalogGroup" end Migrations: class CreateCatalogItems < ActiveRecord::Migration def self.up create_table :catalog_items do |t| t.integer :catalog_group_id t.integer :catalog_root_group_id t.string :code t.timestamps end end For convenience, i referenced each CatalogItem to it's top-most CatalogGroup and named this association "catalog_root_group". This will give us the simple implementation of search request, like "show me all items in group 1". We will have a deal only with CatalogModel.catalog_root_group The problem is - this association does't work. I always get "catalog_root_group" equals to nil Also, i have tried to overcome the using of reference to root group ("catalog_root_group"), but i cannot construct appropriate search request in ruby ... Do you know, how to do it ?

    Read the article

  • problem with ajax on the hosting server

    - by nelly
    when I Implemented chatting Function , I use Ajax to send messages between file to another . so , it is working well on local host . but , when I upload it in to remote server it doesn't work. can U tell me ,why ? is an Ajax need Special configuration ? there is my files that I used : Ajax .js file witch has "ajax_send" function that i used in chatbox.js file chatbox.js file wich consest of functions i used it to send data from php file to another one and it display the state (any user sign in or new sending message and so on ..) user.php file whitch responseble to write user name in the text file usersonline.txt and then display the online users in the online users column. send.php file that write on room1.text recive.php file that read room1.txt and then write the content into the chat box I beleve that the problem comes from the ajax code in Ajax.js File so please help me find out the problem and how to solve it. is ajax needs special server settings ? because it was working at the local host !

    Read the article

  • Best pratice: How do I implement a list that can be rendered both server-side and client-side?

    - by André Pena
    Technologies involved: ASP.NET Web-forms Javascript (jQuery for instance) Case To make it clearer let's give the Stackoverflow authors list as an example. This list can be manipulated at client-side. I can search, page and so forth. So obviously we would need to call jQuery.ajax to retrieve the HTML of each page given a search. Alright. Now this leaves me with the first question: What is the best way to render the response for the jQuery.ajax at server-side? I can't use templates I suppose, so the most obvious solution I think is to create the HTML tags as server-controls and render them as the result of an ASHX request? Is this is best approach? Nice. That solved we have yet another problem: When the user first enters the Authors List the first list page should already come from the server completely rendered alright? Of course we could render the first page as well as an ajax call but I don't think it's better. This time I CAN use templates to render the list but this template couldn't be reused in case 1. What do I do? Now the final question: Now we have 2 rendering strategies: 1) Client and 2) Server. How do I reuse code for the 2 renderings? What are the best pratices for solving these problems?

    Read the article

< Previous Page | 571 572 573 574 575 576 577 578 579 580 581 582  | Next Page >