Search Results

Search found 26523 results on 1061 pages for 'jack back'.

Page 576/1061 | < Previous Page | 572 573 574 575 576 577 578 579 580 581 582 583  | Next Page >

• Forgot to unmount/eject external hard drive, lost moved files. Mac OS X

  - by balupton

  So I was using my Mac with my external hard drive connected via USB. I moved about 10 GB of data to it (via drag and drop while holding down the Command key to move the files rather than to copy them). They moved to the drive all right, but as I was having some issues and the Finder crashed after the transfer, I was unable to eject the volume and later everything froze so I had to do a hard restart (hold the power button). When I remounted the volume (plugged the external hard drive back in) it no longer had any of the files which I moved onto it. As it was a lot of data, how can I recover these files?

  Read the article

• How do I 'see' an external USB drive connected directly to my Broadband Router?

  - by The Cougar Kid

  This is a very frustrating problem! I have a small home network with several dual boot Ubuntu / Windows computers. I have recently upgraded my Broadband connection and the new router permits the direct attachment of an external USB drive which can back up all of the household's computers. There are no problems when booted under Windows, and there were no problems with older versions of UBUNTU, but since upgrading to 11.10 I can no longer "see" the drive. I used to find it via Network / Windows Network / Home / name of Router, but under 11.10 the same method yields an error message Unable to mount location Failed to retrieve share list from server. Can anyone help please? Starting Nmap 5.21 ( http://nmap.org ) at 2011-12-21 10:06 GMT Stats: 0:02:02 elapsed; 0 hosts completed (1 up), 1 undergoing Service Scan Service scan Timing: About 50.00% done; ETC: 10:10 (0:01:56 remaining) Nmap scan report for 192.168.1.254 Host is up (0.0097s latency). Not shown: 998 filtered ports PORT STATE SERVICE VERSION 554/tcp open rtsp? 7070/tcp open realserver? Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 152.38 seconds sudo tail -n 30 /var/log/syslog [sudo] password for alaric: Dec 21 10:05:42 UPSTAIRS2U wpa_supplicant[882]: WPA: Group rekeying completed with 00:01:3b:8b:63:1a [GTK=TKIP]

  Read the article

• Maintaining CSS on a pre-built ASP.net website. How can I run this locally on a home linux server?

  - by DavidR

  I was in charge of the css for a website. I sent in my code to a guy who integrates the css with the dev site. Later they decided it would be better for me to have a more direct role in dealing with the css. I've downloaded everything on the ftp but have no idea how to get this set up. I am running an Apache server on a Fedora Linux install. Is there any way I can set up a local testing server so I can test my changes before ftp'ing them back on the site?

  Read the article

• Audio input problem in Ubuntu 9.10

  - by Andrea Ambu

  My audio input is a mix of my mic output and my sound card output. I'd like it to be just my mic output. I was able to do so in Ubuntu 9.04 but the interface is 9.10 is totally changed and I tried every my creativity was able to think. It's really annoying when talking to other people over the internet because they keep hearing their voice back. I'm not sure I explained it in clear way so I'll give you an example: What I do: I put an mp3 on play or a video on youtube then open a recorder and start to talk on my mic. What happens: both my voice and audio from mp3/youtube get reordered, even if I put headphones volume to 0 (via hardware). What I'd like to happen: Only my voice should be recorded. I'm sure I'm missing some technical term, but that's the problem and I'd like to solve it in Ubuntu 9.10, any idea?

  Read the article

• Returning Shapes to Default in Excel

  - by Craig

  Hi, I have around 70 shapes in a planning document i use for work, everything is fine but i am trying to add a new feature. These shapes are changed using edit points each week to show up on a map, but sometimes shape "A" may not get used in which i just want to turn it back to a default size along with all the other shapes. Does anyone know how i could achieve this via a Macro, i have tried lots of things and searched everywhere but i am at my wits end... If a shape is not default, set all non default shapes to default size. Thanks in advance

  Read the article

• Rsync like windows backup tool

  - by Halfgaar

  I need to backup some windows machines and have been unable to find the proper tool. What I need is a tool that does efficient copying of changed files to a windows network location, like Rsync does. In turn, the server will then back that up using rdiff-backup, a tool which does very clever incremental backups. Right now I'm using windows' 7 included backup feature, but I really don't get that. It's too much off-topic, but it doesn't suffice (seems buggy as well). I looked into Amanda, but as soon as it wanted to install MySQL, I aborted. I also tried Deltacopy, but unfortunately, I don't remember what the problem with that was... Any advice for an rsync like tool that just does daily syncs to a network location?

  Read the article

• why do I get this mail server configuration error?

  - by Francesco

  <<The configuration of your mail servers and your DNS are not ok! The report of the test is: mail.mydomain.com. -> mydomain.com -> 78.47.63.148 -> static.148.63.47.78.clients.your-server.de Spam recognition software and RFC821 4.3 (also RFC2821 4.3.1) state that the hostname given in the SMTP greeting MUST have an A record pointing back to the same server.>> I have a A Record that points mail.mydomain.com to 78.47.63.148 (which is my given ip address for my vps) All other records are fine, so what's wrong and what record should I create to make it right? Thanks

  Read the article

• Reverse lookup of inode/file from offset in raw device on linux and ext3/4?

  - by lilinjn

  In linux, given an offset into a raw disk device, is it possible to map back to an partition + inode? For example, suppose I know that string "xyz" is contained at byte offset 1000000 on /dev/sda: (e.g. xxd -l 100 -s 1000000 /dev/sda shows a dump that begins with "xyz") 1) How do I figure out which partition (if any) offset 1000000 is located in?(I imagine this is easy, but am including it for completeness) 2) Assuming the offset is located in a partition, how do I go about finding which inode it belongs to (or determine that it is part of free space) ? Presumably this is filesystem specific, in which case does any one know how to do this for ext4 and ext3?

  Read the article

• How to switch a Sound Ouput Device before the Mac goes to sleep?

  - by Konzepz

  I've connected my MacBook to a set of external speakers with a USB. Now, every time the computer goes to Sleep Mode, there's an awful static sound coming from the speakers. I guess this is some bad wiring; but that's what I've got. However, I can use an idea for a script (AppleScript, bash, whatever) that will switch off the USB output sound in (System Preferences) before the computer goes to sleep, and will switch it back on (if exists) on Wake. Any ideas? Thanks!

  Read the article

• Should I care about Junit redundancy when using setUp() with @Before annotation?

  - by c_maker

  Even though developers have switched from junit 3.x to 4.x I still see the following 99% of the time: @Before public void setUp(){/*some setup code*/} @After public void tearDown(){/*some clean up code*/} Just to clarify my point... in Junit 4.x, when the runners are set up correctly, the framework will pick up the @Before and @After annotations no matter the method name. So why do developers keep using the same conventional junit 3.x names? Is there any harm keeping the old names while also using the annotations (other than it makes me feel like devs do not know how this really works and just in case, use the same name AND annotate as well)? Is there any harm in changing the names to something maybe more meaningful, like eachTestMethod() (which looks great with @Before since it reads 'before each test method') or initializeEachTestMethod()? What do you do and why? I know this is a tiny thing (and may probably be even unimportant to some), but it is always in the back of my mind when I write a test and see this. I want to either follow this pattern or not but I want to know why I am doing it and not just because 99% of my fellow developers do it as well.

  Read the article

• Activating Windows 7 generates error code 0xc004F061

  - by Jon

  I got a new SSD and wanted to start over with Windows 7 on that disk. I did a clean install (my mistake) on the SSD and just went passed the activation part (left the key blank). Now that I have my system all setup, configured, files pulled back from backup, and ready to go, I'd like to activate Windows 7. However, I now get this error: The following failure occurred while trying to use the product key: Code: 0xC004F061 Description: The Software Licensing Service determined that this specified product key can only be used for upgrading, not for clean installations. Do I really need to wipe my system again, install Windows Vista, and then do the Windows 7 upgrade in order to use my upgrade key? Is there some kind of work around?

  Read the article

• Can I mix CAT5 and CAT6?

  - by Jason94

  I'm thinking of upgrading the "backbone" of my network, taking a CAT6 cable from my router (DLINK DIR-655 (has cat6 ports)) to a gigabit swith in the tv rom (25m). I have two devices there that uses network (xbox and tvbox, both of them have cat5). Will my net be downgraded to 100mbit as max speed, or will I get 1 gigabit between my router and switch, and 100mbit between tvbox and xbox? From back in the days i have a tool to create my cat5 cable (the plug tool thingy), can I use this for my cat6 too?

  Read the article

• KB972455 Windows Server Update Services 3.0 SP2

  - by Sniek NL

  Dear people, My Small Business Server 2003 failed to install this update SP2 for WSUS3.0. The update is not available for rollback. WSUS 3.0 is not to be found in my software configscreen or startup menu. Some files have been deleted from the hard drive and last but not least. The service will not run and .NET runtime errors keep flooding my logs. Question. How to remove an update or program which is not listed in add/remove software anymore. Since the update it fails to run WSUS. Event-id: 0 Category: none Source: .NET Runtime ERROR: This error keeps flooding my logs. I am hesitant to roll back to a system restore point since exchange is running on the same disks.... :)

  Read the article

• What You Said: How Do You Browse Securely Away From Home?

  - by Jason Fitzpatrick

  Responses to this week’s Ask the Reader question show that just because you’re away from home doesn’t mean you have to give up the security and privacy that your home network provides. Earlier this week we asked you to share you browsing away from home security tips and tricks and obliged. JC offered one of the more entertaining tales of away-from-home browsing: Recently a bunch of us stayed at a high end resort down in Mexico. Internet was offered as a pay per device service at about $80/week/device. Considering we had about 12 wifi devices there among us(a few geeks), I decided to plan ahead. I setup a WRT54G as a WiFi client with a vpn back to my house and NAT. Setup a second one as a basic wireless access point with password and plugged it into the first. Onsite we setup the devices and connected to the wireless with one paid account(tied to the MAC address). Everyone connected to the other device for wireless access and it was all tunnelled through my home network with encryption. HTG Explains: Learn How Websites Are Tracking You Online Here’s How to Download Windows 8 Release Preview Right Now HTG Explains: Why Linux Doesn’t Need Defragmenting

  Read the article

• I don't program in my spare time. Does that make me a bad developer?

  - by not-my-real-name

  A lot of blogs and advice on the web seem to suggest that in order to become a great developer, doing just your day job is not enough. For example, you should contribute to open source projects in your spare time, write smartphone apps, etc. In fact a lot of this advice seems to suggest that if you don't love programming enough to do it all day long then you're probably in the wrong career. That doesn't ring true with me. I enjoy my work, but when I come home from the office I'm not in the mood to jump straight back onto the computer and start coding away until bedtime. I only have a certain number of hours free time each day, and I'd rather spend them on other hobbies, seeing friends or going outside than in front of the computer. I do get a kick out of programming, and do hack around outside of work occasionally. I'm committed to my personal development and spend time reading tech blogs and books as a way to keep learning and becoming better. But that doesn't extend so far as to my wanting to use all my spare time for coding. Does this mean I'm not a 'true' software developer at heart? Is it possible to become a good software developer without doing extra outside your job? I'd be very interested to hear what you think.

  Read the article

• Should I use VFAT or ext3 for a 1Tb external usb hard drive?

  - by ihuston

  I have a 1 Tb USB external hard drive which I want to use to backup data from my home and office desktops (both running Linux). Should I format the drive (possibly split into a few partitions) as vfat or ext3? I don't anticipate using the drive with Windows very often so this is not a primary concern. The main thing holding me back from just using ext3 is the problems you can have when two different users (home and work accounts) try to access each others data. Is there any way to mount an ext3 drive with user id mapping?

  Read the article

• I installed ubuntu, the installer told me to reboot afterwards. I dd, and now linux wont boot

  - by mandy

  Im trying to dual boot between mac 10.6.8 and ubuntu 11.10. I have a macbook pro 8,1. So i installed from a 10.04 disk because the install window makes more sense to me, and it doesnt give me errors or anything. Also, any versions of ubuntu after that dont boot from disk for whatever reason. (i think its having to do with the efi boot thing. i have to get ubuntu 11.10 to boot from a usb with folders bootefiboot.iso) Then my plan after that was after the ubuntu 10.04 install took care of all the swap and stuff for me without being messy, to upgrade to 11.10. So here i have 10.04 booting successfully back and forth from mac osx no problem. I put in my 11.10 usb and the installer gives me the option to "update 10.04 to 11.10" bingo, jackpot, thats what i want. Everything proceeds as normal, as EVERY OTHER install of ubuntu i have ever done, then the installer finishes and says HEY! im finished! Continue testing or reboot now! So i reboot, and what do i get??? A black screen that says the file system isnt found, to enter a boot disk and press any key. WHAT THE HELL????? so i boot the 11.10 installer again from usb, and select "erase 11.10 and install 11.10", installer proceeds normally, and asks me to reboot. I reboot and get the SAME THING. Please, someone, help me get this right here. This is my first time actually dual booting between mac and linux. Usually i just wipe off osx completely and install ubuntu but i actually need to keep my mac partition this time. I have successfully installed 11.10 on this machine before, but that was when i did a clean install. Help?

  Read the article

• How to set permalink of your blog post according to date and title of post?

  - by Amit

  I am having this website http://www.finalyearondesk.com . My blogs post link are set like this.. http://www.finalyearondesk.com/index.php?id=28 . I want it to set like this ... finalyearondesk.com/2011/09/22/how-to-recover-ubuntu-after-it-is-crashed/ . I am using the following function to get these posts... function get_content($id = '') { if($id != ""): $id = mysql_real_escape_string($id); $sql = "SELECT * from blog WHERE id = '$id'"; $return = '<p><a href="http://www.finalyearondesk.com/">Go back to Home page</a></p>'; echo $return; else: $sql = "select * from blog ORDER BY id DESC"; endif; $res = mysql_query($sql) or die(mysql_error()); if(mysql_num_rows($res) != 0): while($row = mysql_fetch_assoc($res)) { echo '<h1><a href="index.php?id=' . $row['id'] . '">' . $row['title'] . '</a></h1>'; echo '<p>' . "By: " . '<font color="orange">' . $row['author'] . '</font>' . ", Posted on: " . $row['date'] . '<p>'; echo '<p>' . $row['body'] . '</p><br />'; } else: echo '<p>We are really very sorry, this page does not exist!</p>'; endif; } Any suggestions how to do this? And can we do this by using .htaccess?

  Read the article

• ASUS P5B Plus motherboard - no any drives found - how to restore RAID array?

  - by Moha

  We have a small server machine with an ASUS P5B Plus motherboard and 4 SATA HDDs. The HDDs were configured in a RAID10 array. Up until now, everything worked fine, but now the system doesn't recognize the drives. BIOS is set to RAID, jMicron controller is set to RAID, yet I can't see any of the drives in the BIOS setup, and jMicron BIOS tells me "no any drives found" The HDDs all spin up, I hear no clicking sounds or anything that would suggest HDD error. I did a search on this problem and replaced the SATA cables as suggested, but nothing's changed. What I have in mind is checking the CMOS battery and resetting the BIOS to use IDE mode, but I don't know if it will ruin the RAID system on the HDDs. It is not a critical server and there's only one database running on it (which I have backup of), but I don't want to setup the server from scratch if not necessary. What should I try to restore the RAID array and put the server back to working order?

  Read the article

• Hide Win 8.1 "tip" about "Switch between apps"?

  - by Carl R

  I've just installed Win8.1 and I'm trying to set up IIS. When I open Add remove programs from the start menu I get the pc-settings app. In the pc-settings app I get a "tooltip" or whatever we should call it, that hints me to "Switch between apps" by swiping from the edge. Well fine, but I don't want to do that right now, and I can't get that tip to dissapear. The tip lingers on even into Visual Studio, covering my code. I can't swipe because I don't have a touch screen, and also I'm on a multimonitor system that shows this tip in the middle of the screen. Here's a screenshot for you, where I put the web browser slightly over the left monitor. So, besides rebooting, how am I supposed to kill this very informative tip? EDIT When I kill the app by alt-f4 it dissapears right until I open the settings app again, then it's back. What I'm asking about is how to dismiss items like this in general.

  Read the article

• Terminal Server Install -- Add/Remove Program Message on NonAdministrator Machines

  - by Brandon

  First time poster... My company uses terminal services for one of our remote offices. Data is kept on a different server. OS is Windows Server 2003. Last week, they needed to purchase a program and have it installed on terminal server, which was done. An administrator session was started, the TS was put into install mode and the program was installed. The TS was then put back into execute mode. The install did not require a reboot. Since then, when any user who does not have administrator privileges initiates a remote session and logs in they get a security message that says "Add / Remove programs has been restricted. Please contact your system administrator." The only option is to click OK, which everyone does and after that there are no issues. Anyone have any idea why this is happening and how to fix? Thanks!

  Read the article

• How can I retrieve data from a Western Digital Passport External Disk which is not getting recognized but getting shown as healthy in Device manager

  - by Rabimba Karanjai

  When I plug in this external harddisk It is not getting shown in the My Computer. But it gets shown perfectly well in the Device Manager When I go into the Computer Administrative panel and into the disk manager it asks me to initialize the disk Now when I try to initialize it, regardless of the method I try it shows me an error "Incorrect Function" As you can see windows tells me it is working properly. Is there anyway I can retrieve data from this?/access it? I have googled and it seems to be a frequent problem with WD drives. Anyone has any solutions on how I can get the data back?

  Read the article

• After installing updates, Windows 7 reboots when it gets to "Preparing to Configure"

  - by Travis

  After letting Windows 7 Pro install updates at shutdown I now cannot get it to boot back up. I have tried selecting safemode, and "last known working configuration" and I get the same results. It gets to the screen and says "Preparing to configure Windows" and then reboots. If it is giving me a BSOD it is happening so fast I can not see it. This is a generic PC that has been running fine for the last year. It had 22 updates to do at shutdown. Windows 7 Pro Service Pack 1 64 bit in an Active Directory Domain.

  Read the article

• Storage drives is causting system crash

  - by Chad

  I'm running Centos 5.4 with 750GB(ntfs) and 2TB drives for storage. Originally I installed the 750, everything seemed fine and then I installed the 2TB drive with NTFS already partitioned. I noticed when I would copy a lot of videos it would crash (no mouse or response from server) about 20min into it. After doing some troubleshooting I noticed the 750 would also crash when doing the same task so I decided that NTFS may be the problem. I unmounted the 2TB drive and tried to partition and format it using ext2 but when using parted it would crash at this point "writing inode tables". Looking at the dmesg logs I believe this is the error "mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining". Any idea as to what could be causing this?

  Read the article

• How to move an existing Win7 setup to a RAID-1 array?

  - by Matthew Scharley

  Currently I have a the following setup: Drive A/B: Identical HDD's Drive C: 2TB external drive with plenty of space currently. Hardware RAID controller Currently I have Drive A which is my boot drive (Win7), and Drive C which is a data drive, and Drive B which I only recently received and is blank. What is the best way of moving off of Drive A, setting up the hardware RAID and then migrating my data back onto the RAID array? I'm proficient with Linux, but I'm not sure if I can get away with simply using dd here. There is currently enough free space on Drive C to take 5-6 copies of a disk image of Drive A, so space isn't an issue.

  Read the article

< Previous Page | 572 573 574 575 576 577 578 579 580 581 582 583  | Next Page >