Search Results

Search found 18311 results on 733 pages for 'input director'.

Page 579/733 | < Previous Page | 575 576 577 578 579 580 581 582 583 584 585 586  | Next Page >

• Operation times out trying to SSH outside LAN i.e. from internet to LAN no connection is established

  - by Pelle L

  I run Ubuntu 12.04 and have no success connecting with SSH from "Internet". The router is a TL-MR3420 which is set up to forward requests to one of the NIC's on ubuntu machine (which has in total 3 NICs). I can SSH from a client on the "local" network/LAN. The forward mechanism in the router seems to work. If I stop SSH service on the Ubuntu machine and instead start one on the windows machine - it works like a charm. I do not use the Std port 22 but that shouldn't be an issue as far as I understand - sine it works on the same port on the win machine. Since my public IS isn't static I use a dynDNS service but as said earlier the same setup works from the win machine. The router is located on 192.168.0.1 The Ubuntu NICs has the following IP: eth2 192.168.0.100 , eth1 192.168.0.101 , eth0 192.168.0.102 and I have forwarded the "outside" request to 192.168.0.100 In regards for firewall settings on the Ubuntu machine I have disabled the ufw and the command ufw status give status: inactive. I don't now it this is relevant information but teh command iptables --list give: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have tried to catch traffic with help of wireshark (a tool I'm not too used to use) and it seems as a few (3?) "requests" actually reaches the NIC but ... nothing happens. The syslog does not show any entries during these attempts. Perhaps it could be some routing issues but I have reached my level of competence and are stuck ... all help and support to get this sorted out is much appreciated. I'm new to Linux so please do not assume I have a configuration that is correct - but as I wrote earlier - if the client that initiate SSH is on the LAN it all works. PS:I have also tried to get VPN (PPP) working from Internet with no success - once again VPN works on the windows machine ... so my best guess is that this is related to how the ubuntu machine handles (IP) traffic and not the TL-MR3420 router or other network issues.

  Read the article

• ETPM Forms Accelerator

  - by MHundal

  The ETPM Forms Accelerator provides a template that can be used to enter data related to Registration and Tax Forms.  The Forms Accelerator includes a worksheet for each portion related to forms development (Form Type, Form Section, Form Lines and Form Rules).  The Forms Accelerator provides the details that must be defined in ETPM.  This allows for taking an existing form and translating the details of that form into the spreadsheet.  The spreadsheet can then be used to define the details in the system.  In addition, each of the items to be defined is explained it detail - what the field expects and based on the input, how it impacts the field and form definition.   This is a living document - as there is feedback provided, the document will be updated.  The goal of this accelerator is to be an aide in the Forms Development process.  We encourage feedback to help improve the document.  The document is for ETPM 2.3.1.  Implementations using older version of ETPM will find that some of the field definition options may not exist their current system.   The spreadsheet attached contains the following Worksheets: Instructions:  High-level overview for the different worksheets provided. Form Type:  The fields to be populated when defining the Form Type for a Registration or Tax Form Form Section:  The fields to be populated when creating a Form Section.  The number of sections will differ based on the the form being implemented. Form Lines:  The fields to be populated when creating different Form Lines. The number of lines per section will differ based on the form being implemented. Form Rules:  Based on the form, allows for documenting the Form Rules to be configured based on form instructions and Form Lines. Right click on the link and select the "Save Link As" option.  ETPM Forms Accelerator.xls Please provide feedback to [email protected]. You feedback is encouraged and appreciated.  

  Read the article

• Help recovering broken OS (permissions issue)

  - by Guandalino

  (At the bottom there is an important update.) I was doing experiments in order to backup a remote account to my local system, Ubuntu 12.04 LTS. I'm not confident with duplicity and probably, due to wrong syntax, some local files have been replaced with remote files. This is just a supposition, I'm not sure this is the real cause of OS corruption. The corruption happened after experimenting with backups, so I think I did something wrong at this regard. I was aware there was a problem when I tried to access a command using sudo: $ sudo ls sudo: unable to open /etc/sudoers: Permission denied sudo: no valid sudoers sources found, quitting sudo: unable to initialize policy plugin This is how /etc/sudoers looks like: $ ls -ald /etc/sudoers -r--r----- 1 root root 788 Oct 2 18:30 /etc/sudoers At this point I tried to reboot and now this is the message I get: The system is running in low graphics mode. Your screen, graphics card and input device settings could not be detected correctly. You will need to configure these yourself. I tried to follow the wizard to configure these settings, but without luck (the system prevents me going on when I press "Next"). The thing that makes me a bit less worried is that all the data on the disk seems readable and I'm able to access them using a live cd. I run memtest and RAM seems to be OK. Do you have any idea about how to recover my system? I'm very glad to provide further information, just let me know what info could be helpful. UPDATE. The issue is about wrong permissions and this is how I discovered: I mounted the root partition of the broken OS on /mnt/broken/ (live CD) and did ls /mnt/broken/. I got a permission denied error, while I expected to have the directory listing. I had to do sudo ls /mnt/broken/ and this worked. Thus without having root permission via sudo it's impossible to access the root of broken os. The current output of ls -ld /mnt/broken/ is: drwxr-x--- 29 1000 812 4096 2012-12-08 21:58 /mnt/broken Any thoughts on how to restore the old (working) set of permissions?

  Read the article

• High traffic chat - how to check if there is new message and show it for all users

  - by user2633999

  I already had question about this but obviously it was not accepted very well, apparently too long when it's actually more information so you could have given me better answer. Ok, I will be much clearer now. Best possible logic to develop scalable chat in terms of stability, storing/reading messages on chat, updating chat on new message for all users etc.? I have most of this developed, the logic I think I miss is -- check if there is new message and show it for all users. I have this implemented but it crashes the site due to its traffic of 300k-400k people, so that's my main question. The chat is PHP based and uses Pusher (www.pusher.com) for instant messaging but it lacks what I need because it's more like a websocket. I'm using hardcoded files to keep messages (want to avoid database as much as possible). It's a no extension type of file, I'm sure you know. I'm getting crash with $fp = fopen(..., "w"); // pretend ... is the path and filename fwrite($fp, $msg); //hardcode the message fclose($fp); where $msg is the message itself. I'm having 1 file per message. I show last 150 messages = 150 file accesses and reads, yeah it's too much I guess. I have better logic now which I'm pursuing and that is 1 file with last 50-100 messages at all time. Sure it should be much better. How does it crash, that's the trickiest part because everything seems ordinary, believe me it is difficult to determine what exactly crashes the site, but in like 5 minutes when I try to open the site it's gone, then I put the old content without chat and is back online again. I'm having jquery post every 1 second to check if there is new message. I'm using timestamp in a special file where I keep the time last message was sent and if ((time() - time in file) <= 2) = reload last 150 messages including the last one. Too much input/output, write/read or however to say it I think is what crashes the site.

  Read the article

• Redesigning an Information System - Part 1

  - by dbradley

  Through the next few weeks or months I'd like to run a small series of articles sharing my experiences from the largest of the project I've worked on and explore some of the real-world problems I've come across and how we went about solving them. I'm afraid I can't give too many specifics on the project right now as it's not yet complete so you'll have to forgive me for being a little abstract in places! To start with I'm going to run through a little of the background of the problem and the motivations to re-design from scratch. Then I'll work through the approaches taken to understanding the requirements, designing, implementing, testing and migrating to the new system. Motivations for Re-designing a Large Information System The system is one that's been in place for a number of years and was originally designed to do a significantly different one to what it's now being used for. This is mainly due to the product maturing as well as client requirements changing. As with most information systems this one can be defined in four main areas of functionality: Input – adding information to the system Storage – persisting information in an efficient, searchable structure Output – delivering the information to the client Control – management of the process There can be a variety of reasons to re-design an existing system; a few of our own turned out to be factors such as: Overall system reliability System response time Failure isolation and recovery Maintainability of code and information General extensibility to solve future problem Separation of business and product concerns New or improved features The factor that started the thought process was the desire to improve the way in which information was entered into the system. However, this alone was not the entire reason for deciding to redesign. Business Drivers Typically all software engineers would always prefer to do a project from scratch themselves. It generally means you don't have to deal with problems created by predecessors and you can create your own absolutely perfect solution. However, the reality of working within a business is that the bottom line comes down to return on investment. For a medium sized business such as mine there must be actual value able to be delivered within a reasonable timeframe for any work to be started. As a result, any long term project will generally take a lot of effort and consideration to be approved by those in charge and therefore it might be better to break down the project into more manageable chunks which allow more frequent deliverables and also value within a shorter timeframe. As the only thing of concern was the methods for inputting information, this is where we started with requirements gathering and design. However knowing that there might be more to the problem and not limiting your design decisions before the requirements is key to finding the best solutions.

  Read the article

• Is it smart to take a year off from school to get experience?

  - by user134147

  firstly I apologize if this question is not appropriate for the site, but I've seen other similar (though slightly deviant) questions on this sight before and I know the people here are the most qualified to answer my question. Anyways, I'm currently between my sophomore and junior years at a 4 year university, and after a bit of deliberation I've decided on computer science as a major (BA, by the way, as a BS would require me to stay at least an extra year the way our program is set up). I've been interested now in programming for a few months and I've developed a passion for it in a very short time. I began learning C++, migrating to Java recently when I learned my school focuses on this language. Now, I should mention that the concept of higher education has never sat well with me, so part of my motivation for wanting to take time off is to truly challenge myself and see what I can accomplish when I actually try at something. The autodidact in me finds it difficult to focus on my passions while trying to keep a high GPA in unrelated classes. However, I understand the times we live in and therefore would plan to complete my degree after this year. So my question is whether or not the skills I learn in a year off from college could justify the time off from school. Unfortunately, I don't believe I know enough yet to gain any professional experience (internship, etc.) so I would mostly focus my time on learning Java and another language, possibly Wordpress (to gain an understanding of web programming concepts as I have not yet decided what field I want to get into, and to make some money to fund my off-year), and to delve into security concepts, which also interest me. I'm hoping I could work on projects, such as simple applications or contributions to open source software during this time to enhance my resume once I do finish school, so I can find a job out of college easier. I do not want to be the new hire who knows nothing beyond the concepts of his Java textbooks. Does anyone have any input about these thoughts of mine, or any ideas for where I should focus my studies or how high I might set the bar for my work? Thanks a lot everyone!

  Read the article

• BizTalk Orchestration & Port Tutorial Part 2

  - by bosuch

  In Part 1 I showed how to create and publish a simple Orchestration demo. Now we’ll finish configuring it in the admin console and test it. Open the BizTalk Server 2009 Administration Console, and expand BizTalk Server 2009 Administration, then Applications. You should have an entry for OrchestrationPortDemo – expand it as well. First, we’ll add the Receive Port – the place that we’ll drop the test file. Right-click on Receive Ports and select New One-way Receive Port. On the General tab, name it InputPort, then click over to Receive Locations.   Click New to add a new location. Your receive location can be FTP, SQL, WCF, SharePoint, or many other choices, but for this demo we’ll add a File location. Click the Configure button and set a receive folder (something like “C:\PortDemo\”) and a file mask (stick with “*.xml” for now) and click OK three times to create your Receive Port.   Next we’ll create the Send port – the location where BizTalk will drop the file. Right-click on Send Ports and choose New Static One-way Send Port. Give it an appropriate name, and configure the FILE Transport Properties as shown:   Click OK twice and your Send Port will be created. Now we’ll configure the Orchestration Bindings. Click on Orchestrations, then right-click the orchestration itself and select Properties. Select the Bindings tab. Choose BizTalkServerApplication as the host, and select the Send and Receive ports you previously created, as shown:   Now it’s time to fire everything up. Right-click on the send port you created and click Start. Once the Status column displays “Started”, click on Receive Locations and Enable the Receive Location previously created. Finally, start the Orchestration. Now, time to test! Create a simple xml file like: <root>    <Node1>Test</Node1>    <Node2>Test</Node2> </root> And drop it into the C:\PortDemo folder. After a couple of seconds the file should disappear – this indicates BizTalk has picked it up for processing. Look in the C:\PortDemo\Output folder and you should see an xml file with a GUID for a name, like {7C50104F-FC3E-4A49-B2FA-4F560A37636D}.xml. Open it to verify that it matches your input file. Practically, this demo doesn’t do a whole heck of a lot, but it shows you the basics for building, publishing and running an orchestration.

  Read the article

• What is the right way to group this project into classes?

  - by sigil

  I originally asked this on SO, where it was closed and recommended that I ask it here instead. I'm trying to figure out how to group all the functions necessary for my project into classes. The goal of the project is to execute the following process: Get the user's FTP credentials (username & password). Check to make sure the credentials establish a valid connection to the FTP server. Query several Sharepoint lists and join the results of those queries to create a list of items that need to have action taken on them. Each item in the list has a folder. For each item: Zip the contents of the folder. Upload the folder to the FTP server using SFTP Update the item's Sharepoint data. Email the user an Excel report showing, e.g., Items without folder paths Items that failed to zip or upload Steps 2-5 are performed on a periodic basis; if step 2 returns an invalid connection, the user is alerted and the process returns to step 1. If at any point the user presses a certain key, the process terminates. I've defined the following set of classes, each of which is in its own .cs file: SFTP: file transfer processes DataHandler: Sharepoint data retrieval/querying/updating processes. Also makes and uploads the zip files. Exceptions: Not just one class, this is the .cs file where I have all of my exception classes. Report: Builds and sends the report. Program: The main class for running the program. I recognize that the DataHandler class is a god object, but I don't have a good idea of how to refactor it. I feel like it should be more fine-grained than just breaking it into Sharepoint, Zip, and Upload, but maybe that's it. Also, I haven't yet worked out how to combine the periodic behavior with the "wait for user input at any point in the process" part; I think that involves threads, which means other classes to manage the threads... I'm not that well-versed in design patterns, but is there one that fits this project well? If this is too big of a topic to neatly explain in an SO answer, I'll also accept a link to a good tutorial on what I'm trying to do here.

  Read the article

• Generate GUID from any string using C#

  - by Haitham Khedre

  Some times you need to generate GUID from a string which is not valid for GUID constructor . so what we will do is to get a valid input from string that the GUID constructor will accept it. It is recommended to be sure that the string that you will generate a GUID from it some how unique. The Idea is simple is to convert the string to 16 byte Array which the GUID constructor will accept it. The code will talk : using System; using System.Text; namespace StringToGUID { class Program { static void Main(string[] args) { int tokenLength = 32; int guidByteSize = 16; string token = "BSNAItOawkSl07t77RKnMjYwYyG4bCt0g8DVDBv5m0"; byte[] b = new UTF8Encoding().GetBytes(token.Substring(token.Length - tokenLength, tokenLength).ToCharArray(), 0, guidByteSize); Guid g = new Guid(b); Console.WriteLine(g.ToString()); token = "BSNePf57YwhzeE9QfOyepPfIPao4UD5UohG_fI-#eda7d"; b = new UTF8Encoding().GetBytes(token.Substring(token.Length - tokenLength, tokenLength).ToCharArray(), 0, guidByteSize); g = new Guid(b); Console.WriteLine(g.ToString()); Console.Read(); } } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   And The output: 37306c53-3774-5237-4b6e-4d6a59775979 66513945-794f-7065-5066-4950616f3455

  Read the article

• MVC Can the model know ANYTHING about the view?

  - by AwDogsGo2Heaven

  I'm working on a game, and without getting into any details I am using MVC "patterns", "rules" or whatever you want to call it to make the game. The view includes everything needed to draw things on the screen, the controller passes input to the model. And the Model contains game logic. Here's my problem, the game is being made for mobile devices that vary in screen sizes. I feel my model needs to know the view size so it can appropriately adjust for it. I've thought about it for a while I could put all the adjustments in the view, but it just seems inefficient to translate the model positioning to the view's needed positioning every time. If the model knows the size it only needed to adjust itself once. So my question is can I pass the view size to the model without 'breaking' MVC? I feel personally they are still decoupled this way because a size is just a number, I could still change the view any time as long as it has a size. But I wanted to get a community response on this because I haven't seen many discussions of MVC being used in a game. (And to be clear I don't want an answer of why I shouldn't use it in a game, but do I break MVC by letting it know the view's size) EDIT - More details on the game's needs and why I wanted to pass the view. Some objects positions need to be set relative to the edge of the screen (such as UI elements) so that they appear relatively in the same place. Sprite sizes are not stretched if the window size is wider such as an IPhone 5 screen. They will just be placed relatively to the screen edge. .If I gave it to the view to handle this, I will need a flag saying that this element is positioned say x number of pixels from TOP BOTTOM RIGHT LEFT. Then allow the view to draw it with that information. Its acceptable, I just wanted to know if there was a better way while still being MVC because it seems this way will be repeating a logic over and over, where as if I knew the view size in the model, I could convert all the relative positions into absolute positions in one run, but with this I have to convert on every update to the screen.

  Read the article

• ??????????

  - by Allen Gao

  ???????RAC??????????????????10gR2?11gR1.??????????????CRS???????1.ocssd : ???????????(Node Monitoring)????(Group Management),??CRS????????????????????????,????????????(network heartbeat)?????(disk heartbeat)???,?????????????????????,????????????,??????????????????,?????node kill escalation(???11gR1????????),??????????????????????????(reboot time,???3?)????????:ocssd.bin??????????????????????????,??????????????????????????????,misscount(???30?,??????????????600?),????????????,???????????????????,?????????????2???,??????,??????????????,?????????????????????:ocssd.bin?????????????(Voting File)??????????,?????????????????????????????,disk timeou(???200?),?????????????????????,CRS???[N/2]+1????????,??N??????,??????2.oclsomon:????????ocssd????,????ocssd.bin??????,???????3.oprocd:??????Linux?Unix??,????????????????????????????????,?????????:????????????init.cssd?????????????????????????1.??????2.<crs???>/log/<????>/cssd/ocssd.log3.oprocd.log(/etc/oracle/oprocd/*.log.* ? /var/opt/oracle/oprocd/*.log.*)4.<crs???>/log/<????>/cssd/oclsomon/oclsomon.log5. Oracle OSWatcher ????????????????????1.?ocssd???????????ocssd.log???????,????????????????????????????????,???????,OSW??(traceroute???),???????(cluster interconnect)??????,?????????[ CSSD]2012-03-02 23:56:18.749 [3086] >WARNING: clssnmPollingThread: node <node_name> at 50% heartbeat fatal, eviction in 14.494 seconds[ CSSD]2012-03-02 23:56:25.749 [3086] >WARNING: clssnmPollingThread: node <node_name> at 75% heartbeat fatal, eviction in 7.494 seconds[ CSSD]2012-03-02 23:56:32.749 [3086] >WARNING: clssnmPollingThread: node <node_name>at 90% heartbeat fatal, eviction in 0.494 seconds[CSSD]2012-03-02 23:56:33.243 [3086] >TRACE:   clssnmPollingThread: Eviction started for node <node_name>, flags 0x040d, state 3, wt4c 0[CSSD]2012-03-02 23:56:33.243 [3086] >TRACE:   clssnmDiscHelper: <node_name>, node(4) connection failed, con (1128a5530), probe(0)[CSSD]2012-03-02 23:56:33.243 [3086] >TRACE:   clssnmDiscHelper: node 4 clean up, con (1128a5530), init state 5, cur state 5[CSSD]2012-03-02 23:56:33.243 [3600] >TRACE:   clssnmDoSyncUpdate: Initiating sync 196446491[CSSD]2012-03-02 23:56:33.243 [3600] >TRACE:   clssnmDoSyncUpdate: diskTimeout set to (27000)ms??:???????ocssd.log?????????????????????,?????????????????????ocssd.log???????,??????????????????????????????,OSWatcher??(iostat???),???i/o????????,?????????2010-08-13 18:34:37.423: [    CSSD][150477728]clssnmvDiskOpen: Opening /dev/sdb82010-08-13 18:34:37.423: [    CLSF][150477728]Opened hdl:0xf4336530 for dev:/dev/sdb8:2010-08-13 18:34:37.429: [   SKGFD][150477728]ERROR: -9(Error 27072, OS Error (Linux Error: 5: Input/output errorAdditional information: 4Additional information: 720913Additional information: -1))2010-08-13 18:34:37.429: [    CSSD][150477728](:CSSNM00060: )clssnmvReadBlocks: read failed at offset 17 of /dev/sdb82010-08-13 18:34:38.205: [    CSSD][4110736288](:CSSNM00058: )clssnmvDiskCheck: No I/O completions for 200880 ms for voting file /dev/sdb8)2010-08-13 18:34:38.206: [    CSSD][4110736288](:CSSNM00018: )clssnmvDiskCheck: Aborting, 0 of 1 configured voting disks available, need 12010-08-13 18:34:38.206: [    CSSD][4110736288]###################################2010-08-13 18:34:38.206: [    CSSD][4110736288]clssscExit: CSSD aborting from thread clssnmvDiskPingMonitorThread 2010-08-13 18:34:38.206: [    CSSD][4110736288]###################################2. ?oclsomon???????????oclsomon.log ?????,??????????ocssd????,??ocssd??????(RT)???,?????????????(?cpu)??,?????????????,OSW??(vmstat,top???),?????????3.?oprocd???????????oprocd?????????,?????????oprocd????? Dec 21 16:15:30.369857 | LASTGASP | AlarmHandler:  timeout(2312 msec) exceeds interval(1000 msec)+margin(500 msec).   Rebooting NOW.??oprocd?????????????????????,?????ntp(?????????),??diagwait=13 ????????,??,?????????????,??????CRS,???????????????,??????????????oprocd????,??,?????OSWatcher??(vmstat,top???),??????????????????????????????,????????????????? ???????,??????MOS ???Note 265769.1 :Troubleshooting 10g and 11.1 Clusterware RebootsNote 1050693.1 :Troubleshooting 11.2 Clusterware Node Evictions (Reboots)

  Read the article

• iptables issue on plesk

  - by Fred Rufin

  i don't know how to open a specific port (rtmp=1935) on my CentOS server using Plesk or itables. I created new rules for port 1935 i/o using Plesk/Modules/Firewall but this doesn't work. Nmap scanning tells me this : 1935/tcp filtered rtmp . So i decided to have look at my iptable using SSH (iptables -L), and iptables seems to contain my rules (tcp spt:macromedia-fcs): Chain INPUT (policy DROP) target prot opt source destination VZ_INPUT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED REJECT tcp -- anywhere anywhere tcp flags:!FIN,SYN,RST,ACK/SYN reject-with tcp-reset DROP all -- anywhere anywhere state INVALID ACCEPT all -- anywhere anywhere Chain FORWARD (policy DROP) target prot opt source destination VZ_FORWARD all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED REJECT tcp -- anywhere anywhere tcp flags:!FIN,SYN,RST,ACK/SYN reject-with tcp-reset DROP all -- anywhere anywhere state INVALID ACCEPT all -- anywhere anywhere Chain OUTPUT (policy DROP) target prot opt source destination VZ_OUTPUT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED REJECT tcp -- anywhere anywhere tcp flags:!FIN,SYN,RST,ACK/SYN reject-with tcp-reset DROP all -- anywhere anywhere state INVALID ACCEPT all -- anywhere anywhere Chain VZ_FORWARD (1 references) target prot opt source destination Chain VZ_INPUT (1 references) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpts:filenet-tms:65535 ACCEPT udp -- anywhere anywhere udp dpts:filenet-tms:65535 ACCEPT tcp -- anywhere anywhere tcp dpt:cddbp-alt ACCEPT tcp -- anywhere anywhere tcp dpt:pcsync-https ACCEPT tcp -- localhost.localdomain localhost.localdomain ACCEPT tcp -- anywhere anywhere tcp dpt:macromedia-fcs ACCEPT udp -- localhost.localdomain localhost.localdomain Chain VZ_OUTPUT (1 references) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp spt:http ACCEPT tcp -- anywhere anywhere tcp spt:ssh ACCEPT tcp -- anywhere anywhere tcp spt:smtp ACCEPT tcp -- anywhere anywhere tcp spt:pop3 ACCEPT tcp -- anywhere anywhere tcp spt:domain ACCEPT udp -- anywhere anywhere udp spt:domain ACCEPT tcp -- anywhere anywhere ACCEPT udp -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp spt:cddbp-alt ACCEPT tcp -- anywhere anywhere tcp spt:pcsync-https ACCEPT tcp -- localhost.localdomain localhost.localdomain ACCEPT tcp -- anywhere anywhere tcp spt:macromedia-fcs ACCEPT udp -- localhost.localdomain localhost.localdomain My rules seems to be OK but there is no connection to 1935 port using a browser. I can connect to this port with SSH (typing "wget myServerIP:1935") but maybe this is because it is an SSH tunelling ? I don't know how to do.

  Read the article

• Why does my PowerShell script hang when called in PSEXEC via a batch (.cmd) file?

  - by Kev

  I'm trying to remotely execute a PowerShell script using PSEXEC. The PowerShell script is called via a .cmd batch file. The reason we do this is to change the execution policy, run the powershell script then reset the execution policy again: On the remote server do-tasks.cmd looks like: powershell -command "&{ set-executionpolicy unrestricted}" powershell DoTasks.ps1 powershell -command "&{ set-executionpolicy restricted}" The PowerShell script DoTasks.ps1 just does this for now: Write-Output "Hello World!" Both of these scripts live in c:\windows\system32 (for now) just so they're on the PATH. On the originating server I do this: psexec \\web1928 -u administrator -p "adminpassword" do-tasks.cmd When this runs I get the following response at the command line: c:\Windows\system32>powershell -command "&{ set-executionpolicy unrestricted}" and the script runs no further. I can't ctrl-c to break the script and I just see ^C characters, I can type input from the keyboard and the characters are echoed to console. On the remote server I see that PowerShell.exe and CMD.exe are running in Task Manager's Process tab. If I end these processes then control returns to the command line on the originating server. I have tried this with just a simple .cmd batch file with a @echo hello world and it works just fine. Running do-tasks.cmd on the remote server via an RDP session works ok as well. Why is my remote batch file getting stuck when executing via PSEXEC?

  Read the article

• Can't join OS X Mavericks to AD Domain

  - by watkipet

  I'm attempting to join an OS X Mavericks (10.9) client to a Windows Server 2008 Active Directory domain, however the bind fails with this error in the OS X client's system.log: Oct 24 15:03:15 host.domain.com com.apple.preferences.users.remoteservice[5547]: -[ODCAddServerSheetController handleOtherActionError: gotError: Error Domain=com.apple.OpenDirectory Code=5202 "Authentication server encountered an error while attempting the requested operation." UserInfo=0x7f9e6cb3e180 {NSLocalizedDescription=Authentication server encountered an error while attempting the requested operation., NSLocalizedFailureReason=Authentication server encountered an error while attempting the requested operation.}, Authentication server encountered an error while attempting the requested operation. I've joined (bound) Ubuntu Linux clients to the same domain with net ads join in the past with no problems (using the same administrative user). I don't have access to any server logs. Here's the GUI error (from Directory Utility) on the OS X client: Here's the GUI error (from User's and Groups) in System Preferences on the OS X client: Update After some Wiresharking I've got some more info: OS X Client - KDC (over UDP): AS_REQ (no padata) OS X Client <- KDC (over UDP): KRB5KDC_ERR_PREAUTH_REQUIRED OS X Client - KDC (over UDP): AS_REQ (this time with PA-ENC-TIMESTAMP in padata) OS X Client <- KDC (over UDP): KRB5KDC_ERR_RESPONSE_TOO_BIG OS X Client - KDC (over TCP): AS_REQ (also with PA-ENC-TIMESTAMP in padata) OS X Client <- KDC (over TCP): KDC_ERR_ETYPE_NOSUPP ...and that's it. This is what I think is going on: The OS X client sends a kerberos request. The KDC says, "You need to pre-authenticate. Try again" The OS X client tries to pre-authenticate (all this so far is over UDP) Something gets lost on our network and the KDC says, "Oops something went wrong" The OS X client switches to TCP and tries again. Over TCP, the KDC says, "You're using an encryption type I don't support" Note that in its padata records, the OS X client is always using "aes256-cts-hmac-sha1-96" as its encryption type. However, in its KDC_REQ_BODY record it lists the aes256-cts-hmac-sha1-96, aes128-cts-hmac-sha1-96, des3-cbc-sha1, and rc4-hmac encryption types. When the KDC comes back with KDC_ERR_ETYPE_NOSUPP, it uses rc4-hmac as its encryption type in its padata record. I know next to nothing about Kerberos, but it seems to me that the OS X client should go ahead and try the rc4-hmac encryption type. However, it does nothing after this. Update 2 Here's the debug log from Directory Services on the OS X client. Sorry--it's long. 2013-10-25 14:19:13.219128 PDT - 10544.20463 - ODNodeCustomCall request, NodeID: 52A65FAE-4B24-455D-86EC-2199A780D234, Code: 80 2013-10-25 14:19:13.220409 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - client requested OU - 'CN=Computers,DC=domain,DC=com' 2013-10-25 14:19:13.220427 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Binding using '[email protected]' for kerberos ID 2013-10-25 14:19:13.220571 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - new kerberos credential cache 'MEMORY:0x7fa713635470' for '[email protected]' 2013-10-25 14:19:13.220623 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: loop 1 2013-10-25 14:19:13.220639 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send 0 patypes 2013-10-25 14:19:13.220653 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - fast disabled, not doing any fast wrapping 2013-10-25 14:19:13.220699 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 0 2013-10-25 14:19:13.221275 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.221326 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.221373 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.222588 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.222617 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00000001 2013-10-25 14:19:13.222665 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 1 packets 1 wc: 0.001960 nr: 0.000000 kh: 0.000560 tid: 00000001 2013-10-25 14:19:13.222705 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: loop 2 2013-10-25 14:19:13.222737 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: processing input 2013-10-25 14:19:13.222752 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: got an KRB-ERROR from KDC 2013-10-25 14:19:13.222775 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: KRB-ERROR -1765328359/Additional pre-authentication required 2013-10-25 14:19:13.222791 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send 4 patypes 2013-10-25 14:19:13.222800 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 19 2013-10-25 14:19:13.222808 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 2 2013-10-25 14:19:13.222816 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 16 2013-10-25 14:19:13.222825 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - KDC send PA-DATA type: 15 2013-10-25 14:19:13.222840 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using ENC-TS with enctype 18 2013-10-25 14:19:13.222850 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using default_s2k_func 2013-10-25 14:19:13.227443 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - fast disabled, not doing any fast wrapping 2013-10-25 14:19:13.227502 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 0 2013-10-25 14:19:13.228233 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.228320 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.228374 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.229930 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.229957 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: udp 192.168.0.1:kerberos (192.168.0.1) tid: 00010001 2013-10-25 14:19:13.229975 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto trying over again (reset): 0 2013-10-25 14:19:13.230023 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 2 2013-10-25 14:19:13.230664 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.230726 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.230818 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 11: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.231101 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.232743 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.232777 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00010002 2013-10-25 14:19:13.232798 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 2 packets 2 wc: 0.005316 nr: 0.000000 kh: 0.001339 tid: 00010002 2013-10-25 14:19:13.232856 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: loop 3 2013-10-25 14:19:13.232868 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: processing input 2013-10-25 14:19:13.232900 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using keyproc 2013-10-25 14:19:13.232910 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: using default_s2k_func 2013-10-25 14:19:13.236487 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: extracting ticket 2013-10-25 14:19:13.236557 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_init_creds: wc: 0.015944 2013-10-25 14:19:13.237022 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 2 2013-10-25 14:19:13.237444 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.237482 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.237551 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 11: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.237900 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.238616 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.238645 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00020001 2013-10-25 14:19:13.238674 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 1 packets 1 wc: 0.001656 nr: 0.000000 kh: 0.000409 tid: 00020001 2013-10-25 14:19:13.238839 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - Trying to find service kdc for realm DOMAIN.COM flags 2 2013-10-25 14:19:13.239302 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - submissing new requests to new host 2013-10-25 14:19:13.239360 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to host: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.239429 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - connecting to 11: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.239683 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - writing packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.240350 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - reading packet: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.240387 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - host completed: tcp 192.168.0.1:kerberos (192.168.0.1) tid: 00030001 2013-10-25 14:19:13.240415 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_sendto_context DOMAIN.COM done: 0 hosts 1 packets 1 wc: 0.001578 nr: 0.000000 kh: 0.000445 tid: 00030001 2013-10-25 14:19:13.240514 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - krb5_credential - krb5_get_credentials_with_flags: DOMAIN.COM wc: 0.003615 2013-10-25 14:19:13.240537 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - valid credentials for [email protected] 2013-10-25 14:19:13.240541 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7fa713635470' 2013-10-25 14:19:13.240545 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching GSS to cache 'MEMORY:0x7fa713635470 2013-10-25 14:19:13.240555 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Bind Step 5 - Bind/Join computer to domain - 'domain.com' 2013-10-25 14:19:13.241345 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - resolving 'server.domain.com' 2013-10-25 14:19:13.241646 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - added socket 12 for host 'server.domain.com:389' address '192.168.0.2' to kqueue list 2013-10-25 14:19:13.241930 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Setting kerberos server for 'Kerberos:DOMAIN.COM' to 'server.domain.com' 2013-10-25 14:19:13.241962 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7fa713635470' 2013-10-25 14:19:13.241969 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching GSS to cache 'MEMORY:0x7fa713635470 2013-10-25 14:19:13.242231 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Confidentiality 2013-10-25 14:19:13.242234 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - setting realm 'DOMAIN.COM' for node '/Active Directory/domain.com' 2013-10-25 14:19:13.242239 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Integrity (signing) 2013-10-25 14:19:13.242274 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using hostname 'server.domain.com' 2013-10-25 14:19:13.242282 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using initiator credential '[email protected]' 2013-10-25 14:19:13.250771 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Authenticate to LDAP using Kerberos credential - 0 2013-10-25 14:19:13.250784 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - verified connectivity to '192.168.0.2' with socket 12 2013-10-25 14:19:13.251513 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - locating site using domain domain.com using CLDAP 2013-10-25 14:19:13.252145 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - using site of 'DOMAINGROUP' from CLDAP 2013-10-25 14:19:13.253626 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - resolving 'server2.domain.com' 2013-10-25 14:19:13.253933 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - added socket 13 for host 'server2.domain.com:389' address '192.168.0.1' to kqueue list 2013-10-25 14:19:13.254428 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Setting kerberos server for 'Kerberos:DOMAIN.COM' to 'server2.domain.com' 2013-10-25 14:19:13.254462 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching to cache 'MEMORY:0x7fa713635470' 2013-10-25 14:19:13.254468 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - switching GSS to cache 'MEMORY:0x7fa713635470 2013-10-25 14:19:13.254617 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - setting realm 'DOMAIN.COM' for node '/Active Directory/domain.com' 2013-10-25 14:19:13.254661 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Confidentiality 2013-10-25 14:19:13.254670 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI allow Integrity (signing) 2013-10-25 14:19:13.254689 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using hostname 'server2.domain.com' 2013-10-25 14:19:13.254695 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - GSSAPI using initiator credential '[email protected]' 2013-10-25 14:19:13.262092 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Authenticate to LDAP using Kerberos credential - 0 2013-10-25 14:19:13.262108 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - verified connectivity to '192.168.0.1' with socket 13 2013-10-25 14:19:13.262982 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Computer account either already exists or DC is already Read/Write 2013-10-25 14:19:13.264968 PDT - 10544.20463, Node: /Active Directory, Module: ActiveDirectory - Adding record 'cn=spike,CN=Computers,DC=domain,DC=com' in 'domain.com' The failure point seems to be Computer account either already exists or DC is already Read/Write, however, I can search for 'spike' on the Active Directory server using Active Directory Explorer and it's not there. If I do the same search for the Linux and Windows PCs I added previously, I can find them.

  Read the article

• Installing gitosis and closed port?

  - by Nicolas GUILLAUME

  I'm trying to install gitosis on a Server (hosted by OVH and running Ubuntu server 11.04). I've done it a few times and never had any problems. But this time I have something very wired when I simply try to clone gitosis. [root@ovks-1:~/]#git clone git://eagain.net/gitosis.git Cloning into gitosis... eagain.net[0: 208.78.102.120]: errno=Connection refused fatal: unable to connect a socket (Connection refused) zsh: exit 128 git clone git://eagain.net/gitosis.git Based on my searches it looks like the port 9418 is closed. But I don't understand, a server by definition shouldn't have any closed port and I can't find a way to see if they are. So how can I check is a port is open and how can I open it if closed? Thank you for your help. Requested by WesleyDavid: iptables -L result [root@odeoos-vks-1:~/]#iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have no idea what it means... Thanks :)

  Read the article

• Timeline chart in Excel

  - by Axarydax

  Hi, I'd like to see a timeline of events from a database in a "timeline chart", that should look like this: http://i46.tinypic.com/sw3dj5.png - I've made me a small c# program that paints this onto a Bitmap, but that isn't the way to go. I have input data that has 3 fields: StartX EndX Y 2596 15008 1 5438 6783 2 5450 5453 4 5456 5459 4 5462 5466 4 5470 5474 4 5477 5657 5 5662 5665 4 5668 5671 4 As the picture shows, for each line I'd like to have a line from StartX to EndX with a Y value of Y. Stacked bar chart almost solves my problem, but I don't want to have a new line on the chart for every row, I have thousands of rows and I'd like to have X axis as the time axis, and view which events (Y is the type of the event) happened simultaneously. The image ( http://i46.tinypic.com/sw3dj5.png) I've generated with a simple C# program shows that the event SYSTEM was active all the time, and the events TECH and BREAK were almost exclusive, but had some overlaps. I'd like to at least know the correct direction which I should take; I'm lost in the multitude of Excel chart types. Thanks.

  Read the article

• gen-msg.map missing in Snort rules?

  - by TheLQ

  I am trying to install Snort 2.8.4.1 (only package available in the repos) with Barnyard2 with limited success. I've managed to fix everything but this: [lordquackstar@quackwall rules]$ sudo barnyard2 -c /etc/snort/barnyard2.conf -d /var/log/snort -f snort.u2 -w /etc/snort/barny Password: Running in Continuous mode --== Initializing Barnyard2 ==-- Initializing Input Plugins! Initializing Output Plugins! Parsing config file "/etc/snort/barnyard2.conf" ERROR: Unable to open Generator file "/etc/snort/gen-msg.map": No such file or directory ERROR: Stat check on log dir (/var/log/barnyard2) failed: No such file or directory. Fatal Error, Quitting.. The gen-msg.map error is puzzling me. The rulesets that come with the package do not contain this file. The newish rules I just downloaded from Snort.org for version 2.8.6.1 don't have this file. The only file that looks close is called sid-msg.map, but that's the wrong one. Where can I obtain this file? Just in case it matters: The packages come from the ClearOS repositories (OS is based off of CentOS). I'm running CentOS 5.2

  Read the article

• Firebird 2.1: gfix -online returns "database shutdown"

  - by darvids0n

  Hey all. Googling this one hasn't made a bit of difference, unfortunately, as most results specify the syntax for onlining a database after using gfix -shut -force 30 (or any other number of seconds) as gfix -online dbname, and I have run gfix -online dbname with and without login credentials for the DB in question. The message that I get is: database dbname shutdown Which is fine, except that I want to bring it online now. It's out of the question to close fbserver.exe (running on a Windows box, afaik it's Classic Server 2.1.1 but it may be Super) since we have other databases running off of that which need almost 24/7 uptime. The message from doing another gfix -shut -force or -attach or -tran is invalid shutdown mode for dbname which appears to match with the documentation of what happens if the database is already fully shut down. Ideas and input greatly appreciated, especially since at the moment time is a factor for me. Thanks! EDIT: The whole reason I shut down the DB is to clear out "active" transactions which were linked to a specific IP address, and that computer is my dev terminal (actually a virtual machine where I develop frontends for the database software) but I had no processes connecting to the database at the time. They looked like orphaned transactions to me, and they weren't in limbo afaik. Running a manual sweep didn't clear them out, deleting the rows from MON$STATEMENTS didn't work even though Firebird 2.1 supposedly supports cancelling queries that way. My last resort was to "restart" the database, hence the above issue.

  Read the article

• Fix ACPI DSDT of Amilo Pa 1538

  - by kayahr

  I have a Fujitsu-Siemens Amilo Pa 1538 laptops and installed Ubuntu 10.04 on it (Kernel 2.6.32). Main problem is that the fans of the notebook are always on even when the temperature is low. Another problem is that the display brightness can not be adjusted. Since some years I use Dell laptops and never experienced any ACPI problems so I thought that it is no longer needed to fix ACPI tables but now I have this crap of a laptop and I think I have to do it. Unfortunately I need some help repairing the DSDT. The dsdt.dat and dsdt.dsl of the laptop can be found here: http://www.ailis.de/~k/permdata/20100420/dsdt/ Compiling the DSDT gives the following output: # iasl -sa dsdt.dsl Intel ACPI Component Architecture ASL Optimizing Compiler version 20090521 [Jun 30 2009] Copyright (C) 2000 - 2009 Intel Corporation Supports ACPI Specification Revision 3.0a dsdt.dsl 81: Method (\_WAK, 1, NotSerialized) Warning 1080 - ^ Reserved method must return a value (_WAK) dsdt.dsl 207: Method (_L10, 0, NotSerialized) Warning 1087 - ^ Not all control paths return a value (_L10) dsdt.dsl 2861: Method (NVIF, 3, NotSerialized) Warning 1087 - ^ Not all control paths return a value (NVIF) dsdt.dsl 4551: Store (\_SB.PCI0.LPC0.PMRD (0xFA), Local0) Warning 1099 - Statement is unreachable ^ ASL Input: dsdt.dsl - 4962 lines, 162828 bytes, 2300 keywords AML Output: dsdt.aml - 17627 bytes, 591 named objects, 1709 executable opcodes Compilation complete. 0 Errors, 4 Warnings, 0 Remarks, 519 Optimizations Anyone here with DSDT experience who can help me fixing the DSDT?

  Read the article

• BAD ARCHIVE MIRROR using PXE BOOT method

  - by omkar

  i m trying to automatically install UBUNTU on a client PC by using the method of PXE BOOT method....my Objectives are below:- i m following the steps given in this link installation using PXE BOOT INSTALL 1:-the server will have a KICKSTART config file which contains the parameters for the OS installation and the files which are required for the OS installations. 2:-the client will have to detect this configuration along with the setup files and complete the installation without any input from the user. In my server i have installed DHCP3-server,Apache2 and TFTP for helping me with the installation. i have nearly achieved my first objective,i m able to boot my client using the files stored in the server,but during the installation stage it is asking me to "CHOOSE A MIRROR of UBUNTU ARCHIVE".i gave the server's IP address and the path in the server where the files are located but then too its giving me error "BAD ARCHIVE MIRROR". so is it possible that instead of downloading all the files from the internet and storing them on my disk , can i use the files which comes with the UBUNTU-CD, and how to store this files in what format (should i zip them ) on the disk. secondly i am also generating the ks.cfg which i wanted to give to the client for automatic installation of the OS ,so how should the configuration file be given to the installation process.

  Read the article

• Apache is reponding a blank white page

  - by Bruno Araujo

  I have the following situation: A site hosted in apache 2.4, with ssl, that works like a charm for a while now, but out of no where, without modifications to the site, apache started serving random blank pages. The workaround this is to delete the cookies of the browser or restart the browser. I've switched the vitualhost to log in debug mode but it didn't got me anywhere. Here is the debug log of a failed page load: [Wed Oct 24 10:57:35.762547 2012] [ssl:info] [pid 27854:tid 140617706374912] [client 192.168.10.150:58917] AH01964: Connection to child 147 established (server xxx.com.br:443) [Wed Oct 24 10:57:35.762739 2012] [ssl:debug] [pid 27854:tid 140617706374912] ssl_engine_kernel.c(1966): [client 192.168.10.150:58917] AH02043: SSL virtual host for servername xxx.com.br found [Wed Oct 24 10:57:35.777479 2012] [ssl:debug] [pid 27854:tid 140617706374912] ssl_engine_kernel.c(1899): [client 192.168.10.150:58917] AH02041: Protocol: TLSv1, Cipher: DHE-RSA-AES256-SHA (256/256 bits) [Wed Oct 24 10:57:35.779912 2012] [ssl:debug] [pid 27854:tid 140617706374912] ssl_engine_kernel.c(243): [client 192.168.10.150:58917] AH02034: Initial (No.1) HTTPS request received for child 147 (server xxx.com.br:443) [Wed Oct 24 10:57:35.780044 2012] [authz_core:debug] [pid 27854:tid 140617706374912] mod_authz_core.c(809): [client 192.168.10.150:58917] AH01628: authorization result: granted (no directives) [Wed Oct 24 10:57:40.783950 2012] [ssl:info] [pid 27854:tid 140617706374912] (70007)The timeout specified has expired: [client 192.168.10.150:58917] AH01991: SSL input filter read failed. [Wed Oct 24 10:57:40.784077 2012] [ssl:debug] [pid 27854:tid 140617706374912] ssl_engine_io.c(988): [remote 192.168.10.150:58917] AH02001: Connection closed to child 147 with standard shutdown (server xxx.com.br:443)

  Read the article

• How to ask memcached auth connection by sasl and pam?

  - by user199216

  I use memcached in a untrust network, so I try to use sasl and pam to auth connection to memcached. I installed sasl and pam module, compiled and installed memcached with sasl enabled. Also I created db and table for pam user. I run: $ sudo testsaslauthd -u tester -p abc123 -s /etc/pam.d/memcached 0: OK "Success." where the tester and abc123 is the authed user in db, which I inserted. But my python script cannot be authed, always authentication failed returned. It seems it dose not use pam to authentication, still use sasldb, because when I add user by: $ sudo saslpasswd2 -a memcached -c tester and input password: abc123, It can passed. Python script: client = bmemcached.Client(('localhost:11211'), 'tester', 'abc123') and error: bmemcached.exceptions.MemcachedException: Code: 32 Message: Auth failure. memcached log: authenticated() in cmd 0x21 is true mech: ``PLAIN'' with 14 bytes of data SASL (severity 2): Password verification failed sasl result code: -20 Unknown sasl response: -20 >30 Writing an error: Auth failure. >30 Writing bin response: no auth log found in: /var/log/auth.log Configurations: vi /etc/default/saslauthd MECHANISMS="pam" vi /etc/pam.d/memcached auth sufficient pam_mysql.so user=sasl passwd=abc123 host=localhost db=sasldb table=sasl_user usercolumn=user_name passwdcolumn=password crypt=0 sqllog=1 verbose=1 account required pam_mysql.so user=sasl passwd=abc123 host=localhost db=sasldb table=sasl_user usercolumn=user_name passwdcolumn=password crypt=0 sqllog=1 verbose=1 vi /etc/sasl2/memcached.conf pwcheck_method: saslauthd Do I make my question clear, english is not my native language, sorry! Any tips will be thankful!

  Read the article

• Bypassing Router's DNS Settings

  - by Ramon Marco Navarro

  Is there a way to bypass my ISP provided CPE/router's DNS settings? I'd like to use OpenDNS but I am unable to access the administrator acount of the CPE. I tried logging in using the default passwords (admin/admin, admin/1234, etc) to no avail. I found out later that the admin password is generated using a generator where you input the CPE's MAC address. I tried emailing the manufacturer of the CPE (Huawei, the CPE is Huawei BM625) and my ISP but they aren't replying. I also saw similar queries (lots of them!) at Huawei's forums, without a single reply. So as a last resort, I'd like to know a way to bypass the CPE's DNS settings. My subscription is for a WiMAX service. I'm using Windows 7 and have already set the DNS settings for the Local Area Connection. But I still am not seeing the "You are already using OpenDNS" text at OpenDNS's site. And when explicitly using the OpenDNS servers I still seem to get 208.69.38.150 rather than the expected 208.69.38.160: nslookup www.opendns.com. 208.67.222.222 Server: resolver1.opendns.com Address: 208.67.222.222 Non-authoritative answer: Name: www.opendns.com Address: 208.69.38.150

  Read the article

• ADSIEdit Cleanup After Exchange 2003 Crash During Transition To Exchange 2010

  - by ThaKidd

  Hello all. I would value some input from a few Exchange 2010 experts. I have almost completed the transition from Exchange 2003 Standard to Exchange 2010 Standard. Everything went smoothly until I tried to uninstall Exchange 2003. At that point the server bit the dust and died completely. I now have NO access to the old Exchange System Management MMC as I am running Windows 2008 SR2 and Windows 7 only. I can only fix this with ADSIEdit, EMShell, and EMConsole. I have used the 2010 shell to move/remove/verify that all mailboxes, public folders and OAB are hosted on Exchange 2010. I also verified that the routing connector has been deleted. The only two things that were not done was to remove the Recipient Update Service and actually perform the removal of the 2003 software. I have spent a lot of time going through ASDIedit and have located the old Administrative Group and the Exchange 2003 server listed under it. I also located the Recipient Update Service which includes two entries; Enterprise and my domain name. I have read that it is an unwise idea to remove the old administrative group so I won't bother messing with that. I am repeatedly getting three warnings in the Application Log. Both are from MSExchangeTransport EventID 5006 (Cannot find route to Mailbox Server OLDSERVER) and 5020 (The topology doesn't contain a route to Exchange 2000 Server or Exchange Server 2003) So my questions are: To clean out AD of the old Exchange 2003 info, can I delete the server name folder (Configuration - Services - Microsoft Exchange - ExchOrg - Administrative Groups - First Administrative Group - Servers - Old Server) and also delete the Update Recipient Service (Enterprise) and Update Recipient Service (DOMAIN) containers safely? Are there any additional items I need to address to ensure the AD is clean? Thanks in advance for your help!

  Read the article

• Remote Desktop Mobile mangles barcodes coming from scanner

  - by sfonck

  We have an application here using handhelds to scan barcodes. These handhelds are actually making a remote desktop session towards a server where the application runs. Works fine. Now we have bought some new Motorola MC55's running 'Windows Mobile 6.1 Classic', and when using the application over remote desktop: it mangles the characters of the barcodes.... I already tried following things: When scanning a barcode on the MC55 itself it is displayed correctly When scanning a barcode via the remote desktop into a notepad session it is incorrect. Played with all options of the 'Remote Desktop Mobile' - no result Disabled 'autocorrect' and 'suggest words when entering text' on the input settings - no result The strange things is: a barcode which consists of only numbers gets scanned correctly the mangled characters comes through in lower case For some codes \t is mangled in between (should normally be entered after the barcode) e.g.: 'PERIN4' becomes 'ERINp4' 'MGZB' becomes 'GZB m' 'BAK664' becomes 'AK664 b' 'MAGBFA01' becomes 'AGBFmA01' '5021879949500' gets scanned correctly Final solution: Suppllier of the handhelds said the handheld was sending the characters too fast over the remote desktop connection. They changed the handheld to wait for 50ms between sending each character, which produced correct results right now. Scanning a barcode became somewhat slower but it's almost not remarkable to endusers.

  Read the article

< Previous Page | 575 576 577 578 579 580 581 582 583 584 585 586  | Next Page >