Search Results

Search found 26337 results on 1054 pages for 'desktop computer'.

Page 58/1054 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

  • Is the following combination of components valid to function as a desktop computer? [closed]

    - by Gideon Potgieter
    Could someone with more PC building experience than me tell me whether these PC components can cooperate fully as a self-made PC? Processor: Intel Core i5-3570K Video card: Asus Radeon HD 7870 Motherboard: Gigabyte GA-Z77-D3H RAM: Corsair CMZ16GX3M2A1600C10 Vengeance 16GB 1600MHz CL10 DDR3 (x2) Storage: Western Digital WD1002FAEX (x2) Display: Samsung S24B300HL Sound: Logitech X140 Chassis: Thermaltake V4 Black Edition VM30001W2Z Power supply: Seagate OEM 500W Builder PSU Optical drive: Asus DRW-24B1ST Thanks in advance! (btw, I know 32 GB RAM is unnecessary, but I want to buy it to use as a reserve)

    Read the article

  • Trouble with Remote Desktop pulling through printers. Drive Redirection works, and the ports created but not the printers

    - by Windex
    I've run out of things to look into. All the support documents have been gone through and still provide no resolution. I've checked the service permissions, (sc sdshow spooler) they all match up with other systems and what is output on the support documents. I'm nearly positive that the issue can't be permissions anyway as the software requires all users to be an administrator, so all users are a local administrator. (I haven't looked into why yet but its on the list, I was just recently brought into this team and we've put procedures in place for quick recovery.) We've applied hot fixes relating to RDS and printing, though I'm not sure which ones they were. I've combed through group policy and no where is printer redirection disabled. It's setup with all default values regarding the use and redirection of printers and a quick install of W2k8 R2 shows that it works by default. This dev install was joined to the same domain, placed in the same OU, shows the same policies applied, etc, etc, etc, The server generates all the correct redirected ports but no printers are created. It will also redirect drives without issue, this would seem to rule out the usermode service that handles redirects being broken. No events are logged related to any of the events and there are no events from the TerminalServices-Printer source. There were local printers setup. I didn't think it would mattter but as I was running out of ideas I tried deleting them all with no change. The TS was configured for the software it will be running before we checked out the redirection of printers so the other team responsible to setting up new servers wants to find a fix instead of reloading a new server. I'm not sure where or what else to look for. Any ideas?

    Read the article

  • Copy a harddrive from a failed desktop machine using a second working one.

    - by MrEyes
    Heres the scenario: I have PC-A, an old PC that runs Windows XP but now refuses to boot due to a failed motherboard (or maybe PSU). This PC has a single 80gb IDE drive. I also have PC-B, running Windows Vista, this is working fine. I want to copy all the data off PC-As HDD onto PC-B. To do this I have taken the HDD out of PC-A and connected it as a slave to PC-B. PC-B now boots and sees the additional drive. However, when I attempt to access/copy user folders (i.e. Documents and Settings/[username]/*) I am told that I cannot access the folders due to user permissions. I am doing this under an adminstrator account on PC-B. So the question is, how can I "backup" the data? Preferably without making any changes to the drive contents. The reason for this is that it is possible that PC-A is failing due to a bad PSU, so I intend to replace it before writing off the machine. However I would feel much happier if I had a backup of the data on the HDD.

    Read the article

  • What causes Remote Desktop Services Manager to crash in Server 2008 R2?

    - by milkmood
    I have this consistent problem of RDSM crashing in Server 2008 R2. It is either really slow to open, sometimes never opens, or after it's been open and working properly for a bit, stops working, and forces an unload of the snap-in. It's done this since the deployment of this server, new hardware, new instance of S2k8. Domain Administrator login. I am using it to manage 3 Terminal Servers, the other two are S2k3. I've used it without issues on other 2008 servers.

    Read the article

  • Is it possible to allow saved passwords for remote desktop in a domain environment?

    - by user2813274
    I have checked the "remember password" and every single time, even if it connects correctly after I type a password and check the box, it does not allow subsequent logins using the stored password, saying that it is invalid - is it being saved improperly somehow? is it being disabled by some obscure setting somewhere? (which would be very counter-intuitive, seeing as how the check box is available). I have tried both with domain and non-domain (local) admin accounts, and am using the FQDN for the server. edit: as a troubleshooting step, where would one go to find the (hopefully hashed) password?

    Read the article

  • Platform Builder: Removing the Version Information from the Desktop

    - by Bruce Eitman
    The question of how to remove the version information from the desktop has been around for a long time. It came up again today. The question is about the string displayed on the desktop that looks like one of these, depending on the OS verison: Windows Embedded CE v6.00 (Build xxxx on xxxx) Microsoft Windows CE v5.00 (Build xxxx on xxxx) Microsoft Windows CE .NET v4.20 (Build xxxx on xxxx) I have looked into this in the past, but never really had a definitive answer. I have an answer now. The short answer is that the version information is displayed if the code is built without SHIP_BUILD defined.  I have to be honest, I have given this answer in the newsgroups in the past, but I still had questions. My questions have come from different build machines giving different results.   I have noticed that some engineer’s workstations would have the version information displayed, while others did not. I always stopped short of spending time investigating further because our release build machines never resulted in the version information being displayed. But, we do not typically define SHIP_BUILD for our releases because our customers want or need the debug output. So today I dug further into the question. The answer is actually quite simple. Microsoft builds the retail shell libraries with SHIP_BUILD defined and releases the libraries with Platform Builder. Normally the source code does not need to be built during Sysgen, so the libraries that Microsoft delivered are linked to create the Explorer shell. So typically the Explorer shell displays the version information for debug builds, but does not for retail builds. The trouble comes when the source code is forced to be rebuilt for a retail build. This might happen if an engineer uses “Build and Sysgen” or builds the Public\Shell folder from the command line with the clean flag. I am not sure if Build and Sysgen will cause the problem or not – I have never used Build and Sysgen and I strongly advise against using it (see Platform Builder: Don’t use Build and Sysgen) Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Access PC Settings Easily from Your Desktop in Windows 8 and 8.1

    - by Akemi Iwaya
    Accessing your system’s settings in Windows 8 is not exactly the most straight-forward of processes, so if you need to change your settings often, then it can be a bit frustrating. With that in mind, the good folks over at 7 Tutorials have created an awesome shortcut that will take all the hassle out of accessing those settings, and make ‘tweaking’ Windows 8 much easier. After downloading the zip file, extract the exe file and place it in an appropriate folder, then create a shortcut. Once you have the new shortcut set up in the desired location (i.e. desktop or pinned to the taskbar), accessing your system’s settings has never been easier in Windows 8 and 8.1! Special Note: If you are someone who runs files through VirusTotal before using them, be aware that two listings there (Commtouch and Symantec) will flag the file as malware. We had no problems on our system whatsoever and believe the malware flags to be false positives. Download the Desktop Shortcut to PC Settings, for Windows 8 & 8.1 [7 Tutorials]     

    Read the article

  • Synaptic won't launch from menu in panel in fresh Lubuntu minimal desktop 12.04 install

    - by ven42
    I performed a fresh install of Lubuntu 12.04 with minimal desktop, as described here: https://help.ubuntu.com/community/Lubuntu/Documentation/MinimalInstall. To clarify, I did a command-line install from the Lubuntu alternative install disc, then I did an "apt-get install --no-install-recommends lubuntu-desktop". Everything is working fine, except that Synaptic will not run from the menu entry in the panel. I am not prompted for a password, and no window of any sort appears after clicking the menu entry. I installed lxshortcut to see what the shortcut was running, and the command is "synaptic-pkexec". If I type this command into the "Run" menu, I get the same behavior (or lack thereof). I can get Synaptic to open up just fine by typing "gksudo synaptic" at the "Run" menu. Also, if I run "synaptic-pkexec" from the terminal, then I am prompted for my password within the terminal, and after that Synaptic opens normally. Can someone please suggest the right way to get Synaptic working? I could just change the menu entry to "gksudo synaptic", but I'm guessing that it's set to "synaptic-pkexec" for a reason. I have a vague understanding that this pkexec business has something to do with PolicyKit, but I don't really know what PolicyKit is or how to tell if something is broken with it. Thanks.

    Read the article

  • Stuck on EULA screen when installing netflix-desktop

    - by Jim
    I am trying to install netflix-desktop on my laptop running 13.10. I followed the instructions here: sudo apt-add-repository ppa:ehoover/compolio sudo apt-get update sudo apt-get install netflix-destop After a while, there is a EULA in my xterm that says I must agree to it to get the software. At the bottom of the screen there is ' I have hit , 'A', , typed 'OK' in that xterm but it never gets past that. The application is not available because if I try to launch netflix-desktop in another xterm, it doesn't know what I'm talking about and netflix isn't found on my system when I search search. Can anybody tell me what I'm supposed to do next or what I should have done so that I'm not in this situation next time? Thanks! Solution: I found out that I had to hit the down arrow several times till the lit up. Then I could hit to go to the next step. Then by using the arrow keys to highlight the proper respose(s), I was able to complete the installation. I haven't actually brought up Netflix yet, but it appears to be installing things as expected.

    Read the article

  • Desktop forgets theme?

    - by Marcelo Cantos
    I am running Ubuntu in VirtualBox (on a Windows 7 host). Several times now, the top-level menu bar, the task bar — and seemingly every system dialog — have forgotten the out-of-the-box "Ambiance" theme they conform to when I first installed the system. Window captions still preserve the theme, but pretty much nothing else does. I have searched high and low on Google for assistance with this problem. Everything I've found suggests either running some gconf reset or deleting .gconf* .gnome* and other similar directories. I have followed all this advice and nothing works. I still get a boring Windows-95-style gray 3D look and feel. On previous occasions, after much messing around I've given up and rebooted the VM instance, and been pleasantly suprised to see the original "Ambience" theme restored throughout the UI, but invariably it disappears again some time later, usually after a reboot, so I can never figure out what I did that broke it. Here's a sample from Ubuntu's site of what I want it to look like. And here's a screenshot of my system as it currently looks. Also note that my GNOME Terminals normally have a nice purple semi-translucent look, and as can be seen from the screenshot, they are now just a solid matte white. This last time (just yesterday), trying numerous combinations all the usual tricks and rebooting several times hasn't fixed it, so here I am on SU wondering: How do I recover the out-of-the-box theme for my Gnome/Ubuntu desktop, noting that blowing away all config files — as suggested in many places online — fails to achieve this? It might help to know that it seems to fail either after I resize the VM instance, forcing the Ubuntu desktop to resize itself, or after I play around with Compiz settings. I haven't been able to figure out which of these it is, and it could be neither. Given the amount of pain I have had to go through to get things back to normal (and given that I am at a loss as to how to do so), it has proven difficult to definitively isolate the cause.

    Read the article

  • Ubuntu Desktop does not load

    - by Niklas
    If I login on my Ubuntu 14.04, I get the following desktop: This weird behavior appeared after I executed sudo apt-get update && sudo apt-get upgrade and restarted my computer. Don't know why though. To my Ubuntu I have tried the following (nothing seems to work so far) Fix any broken packages: sudo apt-get update sudo apt-get autoclean sudo apt-get clean sudo apt-get autoremove Locate any broken packages and reinstall them: sudo apt-get install debsums sudo apt-get clean sudo debsums_init sudo debsums -cs sudo apt-get install --reinstall $(sudo dpkg -S $(sudo debsums -c) | cut -d : -f 1 | sort -u) Removing some compiz files: rm -r ~/.cache/compizconfig-1 rm -r ~/.compiz Purging of NVIDIA and installing NVIDIA-prime: sudo apt-get install --reinstall ubuntu-desktop sudo apt-get install unity sudo apt-get purge nvidia* bumblebee* sudo apt-get install nvidia-prime sudo shutdown -r now Compizconfig Settings Manager: sudo apt-get install compizconfig-settings-manager export DISPLAY=:0 ccsm // Back to UI and enablement of Unity Plugin Unity replace, which stopped at a while and did nothing afterwards unity --replace Some dconf reset dconf reset -f /org/compiz/ unity --reset-icons &disown Actually dconf did not work and I got this error: error: Cannot autolaunch D-Bus without X11 $DISPLAY Can anybody help me on that? This is my hardware (hope it helps in any way): Intel® Core™ i7-3770 ASUS GTX660TI-DC2-OG-2GD5 (NVIDIA driver is/was installed) ASUS P8Z77-V LX Corsair DIMM 8 GB DDR3-1600 Kit Samsung 830series 2,5" 256 GB (Windows is installed here) Seagate ST31000524AS 1 TB (3/4 are reserved for files; 1/4 is for Ubuntu (16GB swap included))

    Read the article

  • Keeping files that are often changed in sync between desktop and laptop

    - by N.N.
    I'm looking for a way to keep a desktop and a laptop in sync. What I want to keep in sync are some folders, mainly ~/Documents, that are changed often when working on them. If it matters I can connect to my desktop from anywhere via an URL but my laptop is harder to access since it might be behind NAT and such. I have been looking at Ubuntu One but it seems to not go well with working on documents written in LaTeX. If I work on a .tex file in the Ubuntu One directory and compile it (with pdflatex) every now and then (as often as every 10 sec when working) it will create several new files including a pdf which are uploaded to Ubuntu One and this seems stupid since it will create continuous upload when working on .tex files. I also usually keep .tex documents version controlled by git and then every commit (which also can happen frequently) will cause upload (by changes in ./.git) so that it happens continuously when working. Another example is editing images that are saved often. What I think would be best is for sync to happen every tenth minute or at the end of every working session (but there might be some other way to handle this?).

    Read the article

  • Oracle Virtual Desktop Client with USB smart card reader

    - by wim.coekaerts
    I have my Sun Ray thin client at home which I use religiously, I use a Sun Ray 3i at work as my main desktop and just always take my smart card home and happily continue with the hot desking feature. We released a software version of the Sun Ray client called Oracle Virtual Desktop Client (OVDC). There is a version for Windows, Linux and Mac OS X. I have a minimac at home and I installed OVDC on it, which of course works great but since I like to re-connect to my session that I use at work, I wanted to try out the external usb smart card reader feature. I ordered a cute, low cost device online and tried it out. As expected, it worked out of the box without -any- configuration. I took the device, plugged it into my minimac, started OVDC, plugged in my smartcard and I got the password screen (screensaver) to get into my sun ray session on my server at work. Nothing new here, this is a feature that's been in the product but I had never tried it before and it works out of the box and is super easy and I just felt like sharing :-) Here are a few pictures : (1) login screen (2) smart cardreader without card (3) password screen (4) smart card reader with card

    Read the article

  • Touchpad stops working after desktop shows up

    - by gsedej
    Hi! I have problem with touch-pad. It is not working correctly. It goes like this. When laptop is booting, right after desktop shows, I can move mouse with touch-pad for a second, but when icons shows up, touch-pad does not want to move cursor at all. Even buttons stops work. The same problem with Ubuntu 10.04 and Ubuntu 10.10 I can see "Touchpad" tab in "Mouse" menu, and I can even set "two finger scrolling". I checked in gconf-editor under "desktop-gnome-pheriferals-touchpad" and it's enabled. Furthermore I checked xinput and it is as it should be: SynPS/2 Synaptics TouchPad id=11 [slave pointer (2)]. I tried to create new master reattach but still nothing... EDIT: Laptop has fn + F7 to control touch-pad. Ubuntu shows bobble showing touchpad OFF and touchpad ON. But it does nothing. No matter if it say ON, it still does not work.

    Read the article

  • Easily Add Program Shortcuts to the Desktop Context Menu in Windows 7

    - by Lori Kaufman
    If you use the Desktop context menu often, wouldn’t it be useful if you could add program shortcuts to it so you can quickly access your favorite apps? We’ve shown you how to do this using a quick registry tweak, but there’s an easier way. DeskIntegrator is a free, portable program that allows you to quickly and easily add applications to the Desktop context menu. It does not need to be installed. Extract the program files from the .zip file you downloaded (see the link at the end of the article) to a location on your hard drive. NOTE: This article shows you how to use DeskIntegrator in Windows 7, but we tested it in Windows 8 Release Preview and it worked there as well. To use DeskIntegrator, you must run it as administrator. Right-click on the DeskIntegrator.exe file and select Run as administrator from the popup menu. HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux

    Read the article

  • Desktop goes blurry / granulated

    - by Bonfire
    After few minutes using, desktop and fonts in unity-menu goes blurry. See screenshot.! In all applications (browser etc.) graphics seem to be allright. After rebooting problem disappears for few minutes. Changing the wallpaper also makes the desktop clear (for a while) but fonts are still blurry. I have ubuntu 12.04 and windows xp dualbooted. lspci: 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:02.1 Display controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) lshw -c video: *-display:0 description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0100000-d017ffff ioport:30c0(size=8) memory:c0000000-cfffffff memory:d0180000-d01bffff *-display:1 UNCLAIMED description: Display controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 02 width: 32 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:40000000-4007ffff Have you got any ideas to get this solved? Thank you very much! Bonfire

    Read the article

  • libGDX using Stage and Actor produces different camera angles on desktop and Android Phone

    - by Brandon
    libGDX using Stage and Actor produces different camera angles on desktop and Android Phone. Here are pictures demonstrating the problem: http://brandonyuh.minus.com/mFpdTSgN17VUq On the desktop version, the image takes up most all the screen. On the Android phone it only takes up a bit of the screen. Here's the code (not my actual project but I isolated the problem): package com.me.mygdxgame2; import com.badlogic.gdx.*; import com.badlogic.gdx.graphics.*; import com.badlogic.gdx.graphics.Texture.TextureFilter; import com.badlogic.gdx.graphics.g2d.*; import com.badlogic.gdx.scenes.scene2d.*; public class MyGdxGame2 implements ApplicationListener { private Stage stage; public void create() { stage = new Stage(); stage.addActor(new ActorHi()); } public void render() { Gdx.gl.glClearColor(0, 1, 0, 1); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); stage.draw(); } public void dispose() {} public void resize(int width, int height) {} public void pause() {} public void resume() {} public class ActorHi extends Actor { private Sprite sprite; public ActorHi() { Texture texture = new Texture(Gdx.files.internal("data/hi.png")); texture.setFilter(TextureFilter.Linear, TextureFilter.Linear); sprite = new Sprite(new TextureRegion(texture, 0, 0, 128, 128)); sprite.setBounds(0, 0, 300.0f, 300.0f); } public void draw(SpriteBatch batch, float parentAlpha) { sprite.draw(batch); } } } hi.png is included in the above link Thank you very much for answering my question. I've spent 3 days trying to figure it out.

    Read the article

  • Graphical glitches on grub and ubuntu desktop

    - by Klyn
    I've decided to install ubuntu but neither ubuntu or any other linux distro won't even get to the desktop screen or work after getting there. On windows 8, everything is just fine. my new video card works perfectly and I have no problem with anything about it. then when I try to boot from ubuntu with wubi or with usb everything goes like this: 1) Grub screen...no problem at all, colors are just fine everything looks okay 2) and then linux boot screen...weird background color, over the backround there are vertical stripes of red-orange dots. but on the ubuntu logo and text, there are no dots at all! -I mean its shape is perfect- 3) desktop is about the start but * vertical stripes of red colored dots are all over the unity screen*. then when I click on ubuntu's menu, it usually switches to black screen saying something about "panic occured"...and then it restarts or it gives no respond at all. problems started after putting hd 6570 video card on my asus m5a78lm-lx video card which has amd phenom II X4 processor on it. I've searched to find something but there was no similar question that's why I'm almost sure it is kind of unique. again, I'm writing on Windows 8 right now and everything works and looks perfect. so far I've updated bios and anyone knows anything to solve this?

    Read the article

  • Oracle Secure Global Desktop (SGD) 5.1

    - by wcoekaer
    Last week, we released the latest update of Oracle Secure Global Desktop. Release 5.1 introduces a number of bug fixes and smaller changes but the most interesting one is definitely increased support for html5-based client access. In SGD 5.0 we added support for Apple iPads using Safari to connect to SGD and display your session right inside the browser. The traditional model for SGD is that you connect using a webbrowser to the webtop and applications that are displayed locally using a local client (tta). This client gets installed the first time you connect. So in the traditional model (which works very well...) you need a webbrowser, java and the tta client. With the addition of html5 support, there's no longer a need to install a local client, in fact, there is also no longer a need to have java installed. We currently support Chrome as a browser to enable html5 clients. This allows us to enable html5 on the android devices and also on desktops running Chrome (Windows, MacOS X, Linux). Connections will work transparently across proxy servers as well. So now you can run any SGD published app or desktop right from your webbrowser inside a browser window. This is very convenient and cool.

    Read the article

  • Ubuntu (i386 - 32bit) 12.04 LTS [DESKTOP] - Freezes During Preparing to Install

    - by Michael Ecklund
    I know this is for the Desktop version of Ubuntu, but I definitely plan on installing the server as well. I just want a GUI to manage my server. Here is what I have done: Placed Ubuntu i386/32bit 12.04 LTS [DESKTOP] disc in the disc tray. The disc loads fine. Clicked install Ubuntu. Without checking the download updates while installing or install this third-party software. Clicked continue. Mouse cursor turns to spinning circle and remains a spinning circle while the screen freezes its place at "Preparing to install Ubuntu". I tried not checking any of the boxes and clicking continue. I tried checking Download updates while installing. I tried checking Install this third-party software. I tried checking BOTH Download updates while installing AND Install this third-party software. Does anyone else face this very same issue? Is there a workaround for this problem? Do I need to use a lower version of Ubuntu? If so, which version do you recommend for my system specifications? My system meets the system requirements. Here are my exact system specifications. (Custom modifications: 320GBx2 HDD && 256MB AGP GFX card && 1GBx2 RAM)

    Read the article

  • Simultaneous remote connections

    - by user3215
    Is there any package for Ubuntu which allows me to connect to remote computer without disturbing or terminating others who have already connected to that server or who are accessing the computer directly?. I remember I did this in Windows Server 2003 installing Terminal Server when I was doing my course which allowed multiple clients to connect to the server simultaneously with no disturbance to clients and even direct access to server. Is there any package like this for Ubuntu desktops?

    Read the article

  • Any interesting thesis topic?

    - by revers
    Hi, I study Computer Science at Technical University of Lodz (in Poland) with Computer Game and Simulation Technology specialization. I'm going to defend BSc thesis next year and I was wondering what topic I could choose but nothing really interesting is coming to my mind. Maybe You could help me and suggest some subjects related to programming graphics, games or simulations? (or maybe something else that is interesting enough :) ). I would be very grateful for any suggestion!

    Read the article

  • Why suspend / hibernate does not work in Ubuntu 10.10? (blank screen problem)

    - by agn0stic
    I've got a problem with Ubuntu 10.10 suspend / hibernation. When I try to do one of these actions, computer prepares but in the end a blank screen comes up with just a single underscore blinking. Computer becomes unresponsive to mouse/keyboard and only pressing power button on chasis restores it. Disks and coolers are working during the suspend / hibernation as if nothing happened. Can anyone give me some advice how to solve it? Thank you.

    Read the article

  • Hot to fix nautilus desktop on linux mint

    - by user59530
    so I'm using Linux Mint 13 with Cinnamon and suddenly there are no icons on the desktop and the right click doesn't work, it's like the desktop doesn't start up at all, but the Cinnamon interface and everything else are working just fine. This happens only when I open the session with Cinnamon, if I start the session on the classic Gnome or MATE the desktop works. I tried to re-install Cinnamon but nothing changed. Then, I noticed that there are some little problems in Nautilus (sometimes menus aren't the color they're supposed to be), so I'm convinced that Nautilus might be the problem, but I don't know how to fix this, I've tried a few thing but I'm starting to fear that I'm only making it worse. Also, when I open the terminal and type in nautilus here's what's shows up, any help? (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:85:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:192:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:228:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:275:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:310:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:389:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:737:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1095:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1137:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1755:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1856:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1873:18: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1889:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1947:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1954:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1967:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2025:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2075:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2090:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2195:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gnome-panel.css:92:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nautilus.css:15:15: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nautilus.css:15:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nautilus.css:79:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nautilus.css:84:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nautilus.css:113:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nautilus.css:118:18: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nemo.css:15:15: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nemo.css:15:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nemo.css:79:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nemo.css:84:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nemo.css:113:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nemo.css:118:18: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING *: Theme parsing error: unity.css:21:18: Not using units is deprecated. Assuming 'px'. Initializing nautilus-dropbox 1.4.0 Initializing nautilus-open-terminal extension * Message: Initializing gksu extension...

    Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >