Search Results

Search found 28951 results on 1159 pages for 'display mode'.

Page 58/1159 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Linux boot - stop the kernel switching to a new framebuffer mode clearing output

  - by Avio

  I'm working on an embedded system (based onUbuntu 12.04 LTS) and I'm customizing its kernel. I'm having some problem with upstart, mountall and plymouth. Nothing unsolvable I suppose, but the real problem is that I can't diagnose properly what's going on because the kernel (or maybe plymouth) changes the video mode in the middle of the boot process. This completely wipes entire lines of log and prevents any debugging of kernel misconfigurations. My Grub2 config seems to be ok with: GRUB_CMDLINE_LINUX="" GRUB_CMDLINE_LINUX_DEFAULT="acpi=force noplymouth" GRUB_GFXMODE=1024x768x32 GRUB_GFXPAYLOAD_LINUX=keep Here is some relevant output of lspci: 00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) And here is the relevant portion of my kernel configuration: CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_DRM=y CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_I915=y CONFIG_DRM_I915_KMS=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_VESA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=640 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y Every other custom/stock kernel boot fine with that Grub2 config. What I would like to have is a single flow of messages on a single console (retaining one screen resolution) from the bootup logo till the login prompt. Does anybody know what I have to tweak to achieve this?

  Read the article

• Grayed-Out Sleep and Hibernate Options on Windows 7 After Updating Graphics Driver

  - by Maxim Zaslavsky

  I have a Gateway M275 Tablet PC, on which I've installed Windows 7 Ultimate. The laptop is quite old, so there aren't any Win7 drivers for it, not to mention any Vista drivers. Win7 has been working for some time, but I noticed that my video output wasn't working. I went into Device Manager and found that I didn't have a driver for my video card: it just recognized it as the standard one. I searched online and found an XP driver for it, released by Gateway. Device Manager accepted this driver and prompted me to reboot. After that, I noticed that my Sleep and Hibernate options in the Shut Down menu have been grayed-out. I looked online and found that many people are attributing this to display drivers, as such an old driver would surely not be compatible with the standby procedures Windows 7 uses. To make it clear: I was able to Sleep and Hibernate before updating the drivers; now, I can't. Running powercfg /a gives me, "An internal system component has disabled this standby state," for each available standby mode. Is there some way that the driver can be modified to support hibernation? The new driver fixed my video output problem, but I guess hibernation is more important for me. If not, what steps should I take to remove the driver and just leave the standard Windows one, which previously supported hibernation and sleep on this computer? Thanks in advance.

  Read the article

• Windows 7 BSOD, safe mode working,

  - by mil0ck

  I need help getting my dualboot with Windows 7 and Ubuntu 12.04 to work, and since I'm not to experienced with computers I've been pretty dumb. Here's what I've done, quite shortend though: First removed a Ubuntu 10.04 partion, and replaced bootloader using EasyBCD Installed Ubuntu 12.04 on same partion as before Decided I need more space so I shrinked my C: partion (Windows partion) using Here, after rebooting my computer, I was stuck a grub rescue, when booting up the computer I fixed that by using SuperGrubDisk Rescatux and then using my Windows Vista install disk to repair the computer (computer is using Windows 7) I know re-installed Ubuntu 12.04 on the linux partion and got the GRUB-bootloader working Then, after using my computer for several hours, I installed beta drivers (version 304.79) for my GeForce GTS 240 and then rebooted my computer. At the first boot (after reboot) my computer just crashed, and here I am When trying to boot Windows 7 now I get a Blue Screen Of Death. I can though boot in to safe mode with everything working. I have uninstalled the beta drivers and installed the same one as before but still the same problem. I have tried all the commands in Bootrec.exe and none is working. I can't neither find an OS when using Bootrec.exe/ScanOs. I have also tried running: sfc/scannow and that comes out clean. Short: My harddrive and files seems to be intact but when booting I get bluescreen. I can though boot in to safemode with everything working. I need help Thanks to anyone who even took the time to read that. //mil0ck

  Read the article

• Grayed-Out Sleep and Hibernate Options on Windows 7 After Updating Graphics Driver

  - by Maxim Z.

  I have a Gateway M275 Tablet PC, on which I've installed Windows 7 Ultimate. The laptop is quite old, so there aren't any Win7 drivers for it, not to mention any Vista drivers. Win7 has been working for some time, but I noticed that my video output wasn't working. I went into Device Manager and found that I didn't have a driver for my video card: it just recognized it as the standard one. I searched online and found an XP driver for it, released by Gateway. Device Manager accepted this driver and prompted me to reboot. After that, I noticed that my Sleep and Hibernate options in the Shut Down menu have been grayed-out. I looked online and found that many people are attributing this to display drivers, as such an old driver would surely not be compatible with the standby procedures Windows 7 uses. To make it clear: I was able to Sleep and Hibernate before updating the drivers; now, I can't. Running powercfg /a gives me, "An internal system component has disabled this standby state," for each available standby mode. Is there some way that the driver can be modified to support hibernation? The new driver fixed my video output problem, but I guess hibernation is more important for me. If not, what steps should I take to remove the driver and just leave the standard Windows one, which previously supported hibernation and sleep on this computer? Thanks in advance.

  Read the article

• Smarty debug mode not displaying included templates.

  - by Kyle Sevenoaks

  On www.euroworker.no/order I have set Smarty's debug mode on with {debug output=html} in the header, so it will debug every page. But it says: Smarty Debug Console included templates & config files (load time in seconds): no templates included And after a list of template variables, {$cart} Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 561962 bytes) in /home/euroworkerno/www/library/smarty/libs/plugins/modifier.debug_print_var.php on line 30 It also doesn't display a list of templates for any url.. This is strange, can anyone point me to why it won't display the lit of .tpls? I need to find some HTML comments that someone has left in to rid IE of a display bug. Thanks.

  Read the article

• Images not displayed in silverlight when app is run

  - by Sean

  I'm trying to display an image within a Silverlight application but the image does not display when the application is run. When creating the project within Visual Studio I chose the "Automatically generate a test page to host Silverlight at build time" option. Complete code as an example: <UserControl x:Class="SilverlightApplication3.Page" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Width="400" Height="300"> <StackPanel> <Image Source="http://www.beachtownpress.com/db5/00415/beachtownpress.com/_uimages/beach7.jpg" /> </StackPanel> </UserControl> The application appears perfectly within Visual Studio, but when I run the application, the image does not display. Any ideas?

  Read the article

• Using a .delay() function before .css() manipulation in jQuery

  - by Fabian

  I have this: var $ul = $(this).children("ul"); $ul.animate({opacity: 0}, 1000); $ul.delay(1000).css("display", "none") It's for my dropdown menu, and I want it to fade off before it disappears using the display: none; CSS property. However it appears that the .delay() cannot be used on the .css(); it doesn't work, the $ul just disappears right away. I can't use $ul.animate({opacity: 0, display: "none"}, 1000); either.

  Read the article

• Error Installing ruby with RVM Single User mode on Arch Linux

  - by ChrisBurnor

  I've just installed RVM on ArchLinux x64 in single user mode via the recommended install script curl -L https://get.rvm.io | bash -s stable I've also installed all the requirements listed in rvm requirements However, I'm having trouble actually installing any version of ruby. And getting the following error: arch:~ % rvm install 1.9.3 No binary rubies available for: ///ruby-1.9.3-p194. Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies. Fetching yaml-0.1.4.tar.gz to /home/christopher/.rvm/archives % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 460k 100 460k 0 0 702k 0 --:--:-- --:--:-- --:--:-- 767k Extracting yaml-0.1.4.tar.gz to /home/christopher/.rvm/src Prepare yaml in /home/christopher/.rvm/src/yaml-0.1.4. Configuring yaml in /home/christopher/.rvm/src/yaml-0.1.4. Error running ' ./configure --prefix=/home/christopher/.rvm/usr ', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/yaml/configure.log Compiling yaml in /home/christopher/.rvm/src/yaml-0.1.4. Error running 'make', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/yaml/make.log Please note that it's required to reinstall all rubies: rvm reinstall all --force Installing Ruby from source to: /home/christopher/.rvm/rubies/ruby-1.9.3-p194, this may take a while depending on your cpu(s)... ruby-1.9.3-p194 - #downloading ruby-1.9.3-p194, this may take a while depending on your connection... ruby-1.9.3-p194 - #extracting ruby-1.9.3-p194 to /home/christopher/.rvm/src/ruby-1.9.3-p194 ruby-1.9.3-p194 - #extracted to /home/christopher/.rvm/src/ruby-1.9.3-p194 Skipping configure step, 'configure' does not exist, did autoreconf not run successfully? ruby-1.9.3-p194 - #compiling Error running 'make', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/make.log There has been an error while running make. Halting the installation. The log files are as follows: arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/yaml/configure.log __rvm_log_command:32: permission denied: arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/yaml/make.log make: *** No targets specified and no makefile found. Stop. arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/make.log make: *** No targets specified and no makefile found. Stop.

  Read the article

• Monitor connected with WiDi just shows a black screen

  - by Pops

  I have a Dell XPS 18 and want to use an external monitor with it. The monitor has VGA and DVI-D inputs. The XPS 18 has no video output ports, but it does support Intel WiDi. I have a Netgear P2TV2000 WiDi receiver, but it only has composite and HDMI outputs. I'm connecting the receiver to the monitor with an HDMI cable and an HDMI/DVI-D adapter. So, in short, the video path is: Computer → WiDi → WiDi receiver → HDMI cable → HDMI/DVI-D adapter → Monitor After setting all this up, I can't get anything to display on the monitor. At the moment I power the monitor on, I can see my desktop for a brief fraction of a second, and then everything goes black. All of the relevant drivers have been updated to the latest versions. When I use a different WiDi-enabled computer to connect to the same monitor, everything works fine. When I use the original computer and receiver to connect to a TV, everything works fine. It's only when I connect the original computer to the monitor I want to use that the connection fails. What could be going wrong here, and how can I get the video to work consistently?

  Read the article

• Does Windows 7 RC handle non Windows Media Center remotes yet?

  - by zillion

  I'm mostly a Linux geek, but while I will be trying to make my first Arch Linux installation in a virtual machine to learn and make my installation script for the true install, I need a simple OS and Windows 7 was better than Windows XP Media Center cause Media Center is outdated on XP. I tested it has a beta but my Hauppauge wintv-pvr usb2 remote wasn't working but the tv-tuner worked well and I haven't tested Windows XP Mode and my printer Epson Stylus Photo R300. Do someone know this hardware and if the XP Mode is easily supported?

  Read the article

• Ubuntu xrandr rotate issue

  - by user83544

  I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

  Read the article

• Can't get intel atom g-500 video driver to work with ubuntu 10.10 netbook edition.

  - by Matthew

  First of all I am completely new to Linux, so if you respond, please do so in a 'linux for dummies' tone so that my brain will be able to process it. I recently installed ubuntu on my dell mini-inspiron 1010. It has one GB of ram and an intel atom processor that uses the intel 500 graphic accelerator driver for windows and can run 1024x768 comfortably in xp. When I was installing ubuntu had quite a bit of trouble with my display and I am still unable to adjust my settings from 800x600x0x0 and there is no hardware acceleration. I visited the intel site and installed the linux drivers with the help of a friend but still no change. I tried adding resolution settings through xconf but they could not be applied even after I added the values. I am probably going about this totally wrong, but I've spent quite a lot of time browsing through forums and still haven't found a solution. Any help would be greatly appreciated. Also any other beginner tips that you have would be much appreciated. Thanks in advance, Matt

  Read the article

• External USB disk drive cannot be remounted in Windows XP

  - by jackhab

  I have Maxtor Basics Desktop 1TB external USB drive connected to Windows XP. The dirve's firmware puts it to sleep after 10-20 min of inactivity and then the drive cannot be mounted unless I reset it via power connector. While in sleep mode I can see the device in the Device Manager under both Disk drives and USB sections. Is there a way to get the drive out of sleep mode without hard reset? Thanks

  Read the article

• Display with intel integrated graphics, bitcoin mine with Radeon 6950

  - by karategeek6

  I'm on Ubuntu Linux 11.04 64 bit. I have an intel i5 with integrated graphics and a Radeon 6950, with one monitor. I would like to run my graphics on the integrated card, and run bitcoin mining on the 6950. I have bitcoin mining working when I use the 6950 for both display and mining. Every time I try and and use the integrated graphics instead, OpenCL doesn't recognize my 6950. Using aticonfig --initial when using the integrated graphics for display breaks things. So I used the xorg.conf it created as a basis and tried to manually edit it. I really don't know what I'm doing, though. My last attempt is given below. The graphics ran off the integrated card, but the 6950 wasn't recognized. Any help would be greatly appreciated! xorg.conf: #Section "ServerLayout" # Identifier "Intel Layout" # Screen "Default Screen" # Identifier "aticonfig Layout" # Screen "aticonfig-Screen[0]-0" # Screen 0 "aticonfig-Screen[0]-0" 0 0 #EndSection Section "Module" Load "glx" EndSection # Intel Section "Device" Identifier "Intel Integrated Graphics" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Monitor" Identifier "Default Monitor" Option "VendorName" "Monitor Vendor" Option "ModelName" "Monitor Name" Option "DPMS" "true" EndSection Section "Screen" Identifier "Default Screen" Device "Intel Integrated Graphics" Monitor "Default Monitor" DefaultDepth 24 EndSection # ATI Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Is VGA port hot-pluggable?

  - by Martin Bøgelund

  In meetings, I often see people detaching the VGA connector from one running laptop and connecting it to another, while the projector is still on. Is this 100% risk free, and OK by design of the VGA standard? If there's a risk involved in hot-plugging VGA, can it be removed by turning off or suspending either laptop, display, or both? I see this being done all the time without causing disaster, so clearly I'm not interested in answers stating "we do it all the time, so it should be OK!". I want to know if there's a risk - real or in theory - that something breaks when doing this. EDIT: I did an internet search on the topic, and I never found a clear statement as to why it is safe or unsafe to hot swap VGA devices. The typical form is a forum question asking basically the same question as I did, and the following types of statements Yes it's hot swappable! I do it all the time! It involves some kind of risk, so don't do it! You're some kind of moron if you think there's a risk, so just do it! But no explanation as to why it safe or not... Joe Taylors answer below contains a link to a forum post and answers that basically give me the same statements as mentioned above. But again, no good explanation why. So I looked for an actual manual for a projector, and found "Lenovo C500 Projector User’s Guide". It states on page 3-1: Connecting devices Computers and video devices can be connected to the projector at the same time. Check the user’s manual of the connecting device to confirm that it has the appropriate output connector. [image] Attention: As a safety precaution, disconnect all power to the projector and devices before making connections. But again, no good explanation.

  Read the article

• No video signal at boot with custom built computer

  - by Bart Pelle

  After booting my custom built computer, neither the VGA nor the HDMI methods from the video card seem to emit any signal to the display. I have tested both a regular VGA screen and a modern HDMI screen. Both did not receive signal. Below are the specifications from my computer build: Intel Core i5 3350P ASRock B75 Pro 3-M Seagate Barracuda 7200.14 ST1000 DM003 1000GB Corsair Vengeance LP CML 8GX 3M2 A1600 CGB Blue (2 cards) Cooler Master B Series B600 Club 3D Radeon HD7870 XT Jokercard Samsung SH-224 BB Black Sharkoon T28 Case The motherboard does not emit any beeps on startup. The CD tray opens properly and all fans spin. All cables are properly connected. All components are new and no damage was found on any of the components. The fans on the GPU spin aswell. The VGA test we did was by using the onboard graphics from the Intel i5, but this gave no result. The HDMI test was from the GPU which did not emit any signal either. We have not been able to test out the DVI, could this be important to test, even though all the other methods did not work? Thank you for your time and hopefully reply.

  Read the article

• Prevent Windows from resizing all the apps on the desktop when switching monitors

  - by Greg Hewgill

  Short version: When moving my laptop and sleeping between using different monitors, all my open windows are crammed into the upper left corner as if they tried to fit on the laptop internal screen resolution. I plug in and switch to the external monitor before unlocking my session. Is there a way to prevent this automatic resizing? Longer version: I have a laptop that I move between two locations. I have one docking station, and the same kind of monitor configured for 1600x1200, in both locations. The internal laptop screen is awful so I don't use it. Location A: Docking station, monitor connected via DVI. Location B: No docking station, external monitor connected via VGA cable. In this location I have the laptop lid open for keyboard access but I don't use the laptop screen. When moving from Location A to Location B, the laptop wakes up from sleep, displaying the screen on the internal monitor. I switch to the external monitor display (using Fn+F8 on this laptop), and only after that do I unlock my session with my password. However, Windows has crammed all my nicely arranged windows into the upper left corner as if it were trying to fit them all on the laptop internal screen resolution. When moving from Location B to Location A, I have the laptop lid closed when using the docking station so Windows apparently concludes the screen resolution is 1600x1200 and doesn't resize any windows. The laptop is a Dell Latitude running Windows 7 Professional.

  Read the article

• How do I set up dual monitors on Kubuntu 10.04 using the latest nVidia drivers with a 9800M video ca

  - by NoCatharsis

  I'm a Linux newb so please try to keep the lingo low-key. I installed the latest nVidia drivers on my laptop using the 9800M card. The laptop is a Gateway P-7805u and I'm connected to the second monitor using VGA. Also, before installing the nVidia drivers (and just using the basic drivers included with Kubuntu 10.04), basic dual monitor support worked, except I could not enable compositing features for some reason. So I thought the proprietary drivers would fix this. Several issues have arisen since installation: 1) I've clicked through all of the display settings to activate the second screen with absolutely no change. 2) When I try to apply settings and Save Configuration as the nVidia help suggests, I am told that I cannot save to the X.conf file. I assume this is due to innate permissions on my user settings, which I have no idea how to properly configure. 3) I have no idea where to go from here, as most of the fixes I found online involve Linux syntax and verbiage, to which I'm totally clueless after spending over half my life with Windows.

  Read the article

• Ubuntu xrandr rotate issue

  - by user83544

  I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

  Read the article

• Windows 7 - Can't get my TV working as primary display with nVidia 7900GS

  - by Daniel Schaffer

  I just installed Windows 7 Ultimate 64 RTM (from MSDN) on my HTPC, which is connected to a 42" Magnavox LCD TV via component cables to my nVidia 7900GS. Everything was fine through the installation until I went to install the official driver from nVidia. Towards the end of the installation, the TV blinked off and wouldn't come back on. I went and got an LCD monitor and plugged it into a DVI port and the monitor came right up, but was automatically selected as the primary display. Now, if I set the TV to be the primary display, the TV just blanks until I hit escape to cancel the "settings have changed, do you want to keep them" dialog. Any suggestions? Update: I'm able to set the TV as the primary display using the Windows 7 "screen resolution" configuration panel. However, if I try to remove the LCD monitor either by unplugging it or using the configuration, the TV blanks out again. Update 2: This setup was working correctly in Vista Home Premium 32-bit. Update 3: I've uninstalled the nVidia driver and am using the driver that Windows Update installed. As much as this offends my geek sensibilities (must use the "right" driver!!), well, It Works™.

  Read the article

• How to uninstall AMD Display Driver from other install of Windows

  - by nar

  So my Windows 7 had a BSOD from an Ati driver file then restarting only gives me some wierd coloured lines at the top of the screen. Starting in safe mode causes the boot up to freeze at AtiPcie.sys and overlays the same coloured lines on the safe mode start up display. It seems to be a problem with the display driver but I can't get into the OS at all to uninstall it. Luckily I have an old install of Windows 7 from when I moved to a SSD still on my HDD and that runs just fine so I'm pretty sure its a software problem (Maybe the SSD corrupted a driver file or something). So does anyone know how I can uninstall the driver files from another Windows 7 install on the same PC? EDIT: What I mean is, I'm running on the broken PC right now but using a different HDD's windows install. I have full access to the not booting up OS drive with the Windows so I can delete any files/load the registry etc...

  Read the article

• Integration features enabled but drives not available

  - by dsjbirch

  Frustratingly, after a recent update to Windows XP mode integration features, the availability of shared disks from the hosts has been impaired. Does anyone know any kind of workaround or fix (excluding dropbox et al)? I have tried completely uninstalling and reinstalling as per http://www.sevenforums.com/virtualization/63710-refreshing-xp-mode.html#post568715 At one point restarting the machine appeared to have worked, but today again I am without access to my host. Interestingly audio and copy and paste to and from the machine are working.

  Read the article

• netbook screen stays black

  - by sam113101

  I have an acer aspire one netbook. The screen is black but the computer turns on (LED's are on, fan is spinning, etc.) By black I mean absolutely no backlight. I tried to remove the battery and power it on to "discharge" it (I read that on the Internet, not sure if that ever fixes anything), but no luck. I also tried to replace the RAM stick with another one (which I know for sure is working properly), still no luck. I tried to connect an external monitor and switch to it (fn + f5 on this particular model), still no luck, nothing on the external monitor. I read that flashing the BIOS could fix it (http://community.spiceworks.com/how_to/show/22042-acer-aspire-one-black-screen-of-death), I tried to flash it but basically it doesn't do anything when I power it on with the usb thumb drive. No blinking power button. To me it sounds like it might be a dead motherboard, a dead RAM slot (there's only one), or the BIOS thing. I would like to rule out the BIOS possibility, but I need help. The reason I ruled out the dead screen possibility is that it did not switch to the external display when I pressed fn + f5, am I wrong by assuming so? Thank you for your help.

  Read the article

• Linux can dual display but windows can't?

  - by Mr_CryptoPrime

  I have two monitors, one that is hdmi-to-dvi and the other vga-to-dvi. I have an AMD HD Radeon 6900 series graphics card installed. I got Ubuntu to display dual monitors, but then I restarted for an update and then Ubuntu wouldn't even boot in recovery mode, it just kept cycling forever...displaying something about "timeout: killing [filepath] [hexadecimal]. So I tried booting into windows (7-professional) and it crashed and displayed this after rebooting: IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT-IN-NONPAGED-AREA. I went into Bios and reverted to the system defaults and ran system restore and it booted ok, but the dvi-to-dvi monitor would not display. I made sure my drivers were updated and catalyst was updated. Also through research discovered only one is for vga and the other is digital only, so I put the vga-to-dvi in the vga slot and so on. Neither windows or catalyst will detect the dvi-to-dvi montior. Any suggestions? Thanks. EDIT: Found out that booting into Ubuntu with only one monitor (using either monitor with either cable) worked perfectly fine. I could then add another monitor and it displays ok. However, it will, out of the blue, suddenly distort the display. At first I thought the computer crashed, but it is something with the video output from the GPU to the monitor because I pushed the power button and it would refresh every 5secs or so and I could see the "Ubuntu will power down in X seconds", even though it was horribly distorted. Any ideas what's causing this?

  Read the article

• PHP & MySQL pagination display problem.

  - by TaG

  I asked a similar question like this yesterday but after waiting for ever I figured out part of the problem but now I'm stuck again I'm trying to display ... when the search results are to long because my pagination links will keep on displaying and will not stop until every link is displayed on the page. For example I'm trying to achieve the following in the example below. Can some one help me fix my code so I can update my site. Thanks This is what I want to be able to do. First Previous 1 2 ... 5 6 7 8 9 10 11 12 13 ... 199 200 Next Last Here is my pagination code that displays the links. $display = 20; if (isset($_GET['p']) && is_numeric($_GET['p'])) { $pages = $_GET['p']; } else { $q = "SELECT COUNT(id) FROM comments WHERE user_id=3"; $r = mysqli_query ($mysqli, $q) or trigger_error("Query: $q\n<br />MySQL Error: " . mysqli_error($mysqli)); $row = mysqli_fetch_array ($r, MYSQLI_NUM); $records = $row[0]; if ($records > $display) { $pages = ceil ($records/$display); } else { $pages = 1; } } if (isset($_GET['s']) && is_numeric($_GET['s'])) { $start = $_GET['s']; } else { $start = 0; } //content goes here if ($pages > 1) { echo '<br /><p>'; $current_page = ($start/$display) + 1; if ($current_page != 1) { echo '<a href="index.php">First</a>'; } if ($current_page != 1) { echo '<a href="index.php?s=' . ($start - $display) . '&p=' . $pages . '">Previous</a> '; } for ($i = 1; $i <= $pages; $i++) { if ($i != $current_page) { echo '<a href="index.php?s=' . (($display * ($i - 1))) . '&p=' . $pages . '">' . $i . '</a> '; } else { echo '<span>' . $i . '</span> '; } } if ($current_page != $pages) { echo '<a href="index.php?s=' . ($start + $display) . '&p=' . $pages . '">Next</a>'; } if ($current_page != $pages) { echo '<a href="index.php?s=' . ($pages - 1) . '&p=' . $pages . '">Last</a>'; } echo '</p>'; }

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >