Search Results

Search found 23399 results on 936 pages for 'external connection'.

Page 58/936 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Two problems, both with either lock or suspend.

  - by user199208

  I recently did two things that may be the cause of either of them. 1) I started using a second screen 2) I installed xscreensaver instead of the stock, power saving option. My first question is about suspend: every time I wake from suspend, networking is disabled. While I've seen multiple posts about that on here, it didn't start happening until recently. Second, lock seems to be disabled now. Are both of these problems a bug, or was this caused by the second screen or maybe xscreensaver?

  Read the article

• WiFi on Ubuntu 12.04 custom: downloading unbearably slow

  - by Mark

  iwconfig reports 11 Mbps, yet I've seen as low as <1 KBps. This is the latest in my laundry list of Ubuntu problems in a dual-boot machine (cyberpowerpc custom, intel i7-3820, nvidia gtx 570). I received it two days ago, Windows 7 running fine, still having problems with Ubuntu. The browsing is intermittent but unacceptable. e.g. I could get to this site last night but I couldn't post this question. The downloading is unbearably slow, I can't download anything or install any packages because the speed is so slow. e.g. I am trying to install vim which is inexplicably missing from my 12.04 install (add another one to the problems list) and my download speed reported in the terminal was 241 B/s. Yes, bytes. iwconfig reports 11 Mbps, which further adds to the confusion. User@ubuntu:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:39:76:2C:A1 Bit Rate=11 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:54 Invalid misc:18 Missed beacon:0 eth0 no wireless extensions. Any ideas? I see this is a problem a lot of people, but none of the on line solutions have worked for me so far. e.g. one site recommends editing the ath9k.conf file in /etc/modprobe.d, yet this file isn't even in the folder: User@ubuntu:/$ cd etc/modprobe.d User@ubuntu:/etc/modprobe.d$ ls alsa-base.conf blacklist-oss.conf blacklist-ath_pci.conf blacklist-rare-network.conf blacklist.conf blacklist-watchdog.conf blacklist-firewire.conf dkms.conf blacklist-framebuffer.conf nvidia-current_hybrid.conf blacklist-modem.conf nvidia-graphics-drivers.conf I think the nvidia gpu might be mucking things up. I had the "blinking cursor" problem when installing in the first place, and then I had the monitor out of range problem as well. I have my faithful Asus laptop, which is running Ubuntu 12.04 just fine. The only difference is executing host -t SOA local in the terminal gives User@ubuntu:~$ host -t SOA local local has SOA record local. nobody.localhost. 42 86400 43200 604800 10800 in my new machine, and the command reports Host local. not found in the laptop. Help would be most welcome, as I am in danger of reverting back to Windows. I'm seriously considering it. Sorry for the length, trying to show my effort in resolving the issue and include terminal snippets that might be helpful.

  Read the article

• why there is a lot change in the hardware support features in different linux os?

  - by TrazerWalker

  i am using lenovo b460 with 3 GB ram and 500 GB hard disk,(no graphics card). when i live boot Linux mint i was able to connect to WiFi.but when i booted up Ubuntu 11.4 i was not able to connect through WiFi.then later i installed Ubuntu 12.4 and then i got connected with WiFi, but after installing icons and themes through my unity i am not able to view the content in the terminal and the WiFi is also not connecting now even after i changed them all back. wireless connectivity

  Read the article

• Turn Off Sleep on Seagate GoFlex?

  - by RPG Master

  I bought this 2tb Segate GoFlex this last Black Friday and since then every 15 minutes or so the drive spins down, and then a little while later completely dismounts. Very annoying. From what I understand you could turn this off using the including Windows and Mac only software. This function and what controls it isn't proprietary, right? There has to be something that'll let me set it in Ubuntu... Anyone have any suggestions? Also, I formatted it to EXT4. Hope I didn't screw myself up. :/

  Read the article

• TCP connection lost problems in c#

  - by alex

  Hi: In my application, I have a server listening on a port on localhost for client connection. Then I have clients running and establishes connection with the server. I used tcpListner in c# for the server and the clients were written in perl using Inet function. The connection between clients and server were established without a problem and a message from client is received by the server. However, after about 3 to 4 seconds, the connection is lost. I use netstat -a to see if the status of the connection is still "established". The result is "Close_wait" after I use netstat command on DOS. How can I debug this problem? Which side is causing the lost of connection? Thanks

  Read the article

• SSH connection times out

  - by mark

  Given: vm - a WinXPsp3 virtual machine hosted by a Win7sp1 physical machine alice is the user on vm srv - a Win2008R2sp1 server bob is the user on srv quake - a linux server mark is the user on quake Both vm and srv have the same new installation of cygwin (1.7.9) and openssh. Firewall service is disabled on vm (and its host) and on srv All the machines can be pinged from all the machines. ssh mark@quake works OK from both vm and srv. ssh bob@srv works OK from both quake and vm. ssh alice@vm works on the vm itself only, but it fails on the other two machines: alice@vm ~ $ ssh alice@vm alice@vm's password: Last login: Tue Oct 25 23:42:09 2011 from vm.shunra.net [mark@Quake ~]$ ssh -vvv alice@vm OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to vm [172.30.2.60] port 22. debug1: connect to address 172.30.2.60 port 22: Connection timed out ssh: connect to host vm port 22: Connection timed out bob@Srv ~ $ ssh -vvv alice@vm OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to vm [172.30.2.60] port 22. debug1: connect to address 172.30.2.60 port 22: Connection timed out ssh: connect to host vm port 22: Connection timed out I used ssh-host-config both on vm and srv to configure the ssh to run as a windows service. Besides that I did nothing else. Can anyone help me troubleshoot this issue? Thank you very much. EDIT The virtual machine software is VMWare Workstation 7.1.4. I think the problem is in its settings, but I have no idea where exactly. The Network Adapter is set to Bridged. EDIT2 All the machines are located in the company lab, I think all of them are on the same segment, but I may be wrong. Below is the ipconfig /all output for each machine (skipping the linux server). I have deleted the Tunnel adapters to keep the output minimal. If anyone thinks they matter, do tell so and I will post them as well. In addition ping output is given to show that DNS is correct. Something else, may be relevant, may be not. Doing psexec to srv works OK, whereas to vm failes with Access Denied. srv: C:\Windows\system32>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : srv Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) Physical Address. . . . . . . . . : E4-1F-13-6D-F3-00 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 172.30.6.9(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DNS Servers . . . . . . . . . . . : 172.30.1.1 172.30.1.2 NetBIOS over Tcpip. . . . . . . . : Enabled C:\Windows\system32>ping vm Pinging vm.shunra.net [172.30.2.60] with 32 bytes of data: Reply from 172.30.2.60: bytes=32 time=1ms TTL=128 Reply from 172.30.2.60: bytes=32 time=4ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.2.60: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 4ms, Average = 1ms C:\Windows\system32> vm: C:\>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : vm Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net shunranet Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : shunranet Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter Physical Address. . . . . . . . . : 00-0C-29-8F-A0-0B Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 172.30.2.60 Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DHCP Server . . . . . . . . . . . : 172.30.1.1 DNS Servers . . . . . . . . . . . : 172.30.1.1 172.30.1.2 Lease Obtained. . . . . . . . . . : Tuesday, October 25, 2011 18:16:34 Lease Expires . . . . . . . . . . : Wednesday, November 02, 2011 18:16:34 C:\>ping srv Pinging srv.shunra.net [172.30.6.9] with 32 bytes of data: Reply from 172.30.6.9: bytes=32 time=1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms C:\> vm-host (the host machine of the vm): C:\>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : vm-host Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC (NDIS 6.20) Physical Address. . . . . . . . . : 6C-F0-49-E7-E9-30 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f59d:7f6e:1510:6f%10(Preferred) IPv4 Address. . . . . . . . . . . : 172.30.6.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DHCPv6 IAID . . . . . . . . . . . : 242020425 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : 172.30.1.1 194.90.1.5 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::cd92:38c0:9a6d:c008%16(Preferred) Autoconfiguration IPv4 Address. . : 169.254.192.8(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 352342102 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::edb9:b78c:a504:593b%17(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.5.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 369119318 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled C:\>ping srv Pinging srv.shunra.net [172.30.6.9] with 32 bytes of data: Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\>ping vm Pinging vm.shunra.net [172.30.2.60] with 32 bytes of data: Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.2.60: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\> EDIT3 I have just checked - the vm-host is able to ssh to the vm machine! I still do not know how to leverage this discovery to solve the problem.

  Read the article

• How to tell if a datareader is open on a connection and close it

  - by Earlz

  Hi, I'm setting up a little thing for connection pooling and on of the more common bugs that we have occur(its always an easy fix, but we just can't remember reader.Close()!) it is when we have a connection that is used by a lot of classes/methods and one method opens a data reader and forgets to close it. This isn't really bad cause a lot of times all you have to do is go into the debugger and go up one level and see the function before it was and check if it had an unclosed data reader. Now, here is the bigger problem. In this connection pool, if a datareader is open, then it's not known until a thread gets a connection and tries to use it and the thing that originally opened the data reader may no longer even be alive. So quite simply, how can you detect if a data reader is open on a connection and is there a way to close the reader without closing the connection?

  Read the article

• Get foreign key in external content type to show up in list view

  - by Rob

  I have come across blogs about how to setup an external content type (e.g. http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2010/02/02/it-s-easy-to-configure-an-external-list-with-business-connectivity-services-bcs-in-sharepoint-foundation-2010.aspx) but I have not seen any examples of what to do when your external SQL DB has foreign keys. For example. I have a database that has orders and customers. An order has one and only one customer and a customer can have many orders. How can I setup external content types in such a way that when in the list view of these external content types, I can jump between and possible lookup values to that other type?

  Read the article

• When should I open and close a connection to SQL Server

  - by Martin

  I have a simple static class with a few methods in it. Each of those methods open a SqlConnection, query the database and close the connection. This way, I am sure that I always close the connection to the database, but on the other hand, I don't like to always open and close connection. Below is an example of what my methods look like. public static void AddSomething(string something) { using (SqlConnection connection = new SqlConnection("...")) { connection.Open(); // ... connection.Close(); } } Considering that the methods are inside a static class, should I have a static member containing a single SqlConnection? How and when should I drop it? What are the best practices?

  Read the article

• Should I catch exceptions thrown when closing java.sql.Connection

  - by jb

  Connection.close() may throw SqlException, but I have always assumed that it is safe to ignore any such exceptions (and I have never seen code that does not ignore them). Normally I would write: try{ connection.close(); }catch(Exception e) {} Or try{ connection.close(); }catch(Exception e) { logger.log(e.getMessage(), e); } The question is: Is it bad practice (and has anyone had problems when ignoring such exeptions). When Connection.close() does throw any exception. If it is bad how should I handle the exception. Comment: I know that discarding exceptions is evil, but I'm reffering only to exceptions thrown when closing a connection (and as I've seen this is fairly common in this case). Does anyone know when Connection.close() may throw anything?

  Read the article

• Joining tables from 2 different connection strings

  - by krio

  Hello, I need to join two tables from different MySQL (PHP) connection strings and different databases. $conn = mysql_connect('192.168.30.20', 'user', 'pass'); $conn2 = mysql_connect('anotherIPHere', 'user2', 'pass2'); $db = mysql_select_db('1stdb', $conn); $db2 = mysql_select_db('2nddb', $conn2); If I were using the same connection I would just prefix the tables with the db names, such as database1.table1.column and database2.table2.column2, but since I'm using two completely separate connection strings the MySQL Query does not know which connection string to use, thus the resource is not usable. I've read a ton of resources that show how to use two databases, from the SAME connection string and that is working fine, but I can't find anything related to multiple connection strings and databases. Thanks

  Read the article

• Connection Timeout Extension/Detection

  - by ircmaxell

  Well, let me start off by explaining what I'm trying to do. I have an application that stalls a HTTP connection until new data is available (sometimes a few seconds, sometimes 30 minutes or so). Right now, the system works fine if the data is sent within a few minutes. The problem I'm facing, is that it doesn't seem that XHR recognizes a dropped connection... So instead of killing the current connection and reconnecting when it detects a dropped connection, it just sits there. I'd really not like to have it force-reconnect every minute or two (That's one reason this app was written, to stop the need for polling). So, my questions are as follows: Is there a way to detect a dropped (not closed) TCP connection with XHR? Is there a way that I can tell XHR not to timeout (I saw IE8 has the .timeout property) Would it be better to send a header (or some other content) every now and then (say once per minute) down the pipe to keep the connection open? Thanks.

  Read the article

• Best Practice to write Connection string for heavy traffic ASP.NET Web Application

  - by hungrycoder

  What is the best way to define connection string for a web application that has minimum 500 live users on the internet in terms of connection pooling. And load factors to consider? Suppose I have connection string as follows: initial catalog=Northwind; Min Pool Size=20;Max Pool Size=500; data source=localhost; Connection Timeout=30; Integrated security=sspi" as Max Pool Size is 500 and as live users exceed 500 say 520 will the remaining 20 users experience slower page load?? Or what if I have connection string as follows which doesn't talks anything about pooling or Connection time out? How the application behaves then? initial catalog=Northwind; data source=localhost; Integrated security=sspi" I'm using "Using statements" however to access the MYSQL database.

  Read the article

• Error with connection in my database servlet

  - by Zerobu

  Hello, I am writing a Database servlet, all seems well except that there seems to be an error in my connection import java.io.IOException; import java.sql.Connection; import java.sql.DriverManager; import java.sql.PreparedStatement; import java.sql.ResultSet; import java.sql.SQLException; import java.sql.Statement; import java.util.ArrayList; import javax.servlet.RequestDispatcher; import javax.servlet.ServletContext; import javax.servlet.ServletException; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; public class DBServlet3 extends HttpServlet { private static final long serialVersionUID = 1L; @Override public void init() throws ServletException { super.init(); try { String jdbcDriverClass= getServletContext().getInitParameter( "jdbcDriverClass" ); if (jdbcDriverClass == null) throw new ServletException( "Could not find jdbcDriverClass initialization parameter" ); Class.forName( jdbcDriverClass ); } catch (ClassNotFoundException e) { throw new ServletException( "Could not load JDBC driver class", e ); } } @Override protected void doGet( HttpServletRequest request, HttpServletResponse response ) throws ServletException, IOException { RequestDispatcher dispatcher= request.getRequestDispatcher( "/db.jsp" ); ServletContext application= getServletContext(); ArrayList<String> names= new ArrayList<String>(); try { Connection connection= null; Statement statement= null; ResultSet results= null; try { String jdbcUrl= application.getInitParameter( "jdbcUrl" ); String jdbcUser= application.getInitParameter( "jdbcUser" ); String jdbcPassword= application.getInitParameter( "jdbcPassword" ); connection= DriverManager.getConnection( jdbcUrl, jdbcUser, jdbcPassword ); statement= connection.createStatement(); results= statement.executeQuery( "SELECT * FROM students" ); while (results.next()) { String name= results.getString( "name" ); names.add( name ); } } finally { if (results != null) results.close(); if (statement != null) statement.close(); if (connection != null) connection.close(); } } catch (SQLException e) { throw new ServletException( e ); } request.setAttribute( "names", names ); dispatcher.forward( request, response ); } @Override protected void doPost( HttpServletRequest request, HttpServletResponse response ) throws ServletException, IOException { String sql= "INSERT INTO students VALUES (" + request.getParameter( "id" ) + ", '" + request.getParameter( "name" ) + "')"; sql= "INSERT INTO students VALUES (?, ?, ?, ?)"; PreparedStatement statement= connection.prepareStatement( sql ); //error on this line statement.setString( 1, request.getParameter( "id" ) ); statement.setString( 2, request.getParameter( "name" ) ); } }

  Read the article

• Have an external java application by notified of changes to Entity EJBs in JBoss AS

  - by John

  I'm trying to connect an external application to a JBoss AS container. The external application is a Java application that is currently being notified of changes to database entities through a JMS topic. I've added an EntityLifecycleListener class to all my entities that publishes a serialized (and unwrapped) copy of the entity to the JMS topic. The problem is that this implementation ignores the transaction boundaries of the JBoss container. For example, the @PostUpdate event can be fire, generating the JMS message for that entity, but the transaction could be rolled back causing the external application to be notified of an invalid change and become unsync'd. I need my external application to only be notified of successful commits to the database, but I need to be able to publish the entire java POJO to the external application. Is there an official way of doing this?

  Read the article

• How to suppress an unwanted external Autodiscover lookup?

  - by chris

  In a small network with Exchange 2007, when starting Outlook 2010 (and once in a while afterwards), users get a prompt to confirm that it's safe to get account configuration information from cpanelemaildiscovery.cpanel.net/autodiscover/autodiscover.xml (I could read in a couple of forums that there is a bug in cpanel, but that's beside the point.) I'm puzzled because I can't find any autodiscover DNS entries anywhere, neither internally nor externally. The only hint is that we use an external hosting company for our website and for one single email address, which runs on cpanel. So I guess that Outlook makes an external DNS query to test all entries? It reates a lot of confusion for the users and frankly I'm not too happy that the external hosting company gets contacted by all our users. How can I suppress this behavior? Thanks

  Read the article

• Postfix Send Error: Must Issue STARTTLS command

  - by Mary Elizabeth

  Running Ubuntu 12.04 and trying to configure postfix to relay send and receive through GMAIL. Am running into connection issues particularly with TLS. Have tried a bunch of troubleshooting solutions and have changed my main.cf to address TLS but still receive the below errors. Tried debugging connection issues with: `root@mailservice:/etc/postfix# openssl s_client -connect localhost:587 -starttls smtp` and I recveive these errors `connect: Connection refused' 'connect:errno=111` in my logs I see: Jun 11 13:54:31 mailservice postfix/smtp[3765]: warning: cannot get RSA certificate from file /etc/postfix/cert.pem: disabling TLS support Jun 11 13:54:31 mailservice postfix/smtp[3765]: warning: TLS library problem: 3765:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:696:Expecting: TRUSTED CERTIFICATE: Jun 11 13:54:31 mailservice postfix/smtp[3765]: warning: TLS library problem: 3765:error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib:ssl_rsa.c:729: Jun 11 13:54:31 mailservice postfix/smtp[3765]: 9986B6846A: to= <[email protected]>, relay=smtp.gmail.com[173.194.77.109]:587, delay=0.15, delays=0.02/0.02/0.09/0.02, dsn=5.7.0, status=bounced (host smtp.gmail.com[173.194.77.109] said: 530 5.7.0 Must issue a STARTTLS command first. hd9sm12170509obc.6 (in reply to MAIL FROM command)) The contents of my main.cf (pertaining to TLS) look like this: #TLS Parameters smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache #TLS Settings smtp_use_tls = yes smtp_tls_security_level = may smtp_tls_loglevel = 1 smtp_enforce_tls = yes smtp_tls_CAfile = /etc/postfix/cacert.pem smtp_tls_cert_file = /etc/postfix/cert.pem smtp_tls_key_file = $smtp_tls_cert_file smtp_tls_session_cache_dataabase = btree:/var/run/smtp_tls_session_cache smtp_tls_note_starttls_offer = yes smtpd_use_tls = yes smtpd_tls_security)level = may smtpd_tls_auth_only = no smtpd_tls_CAfile = /etc/postfix/cacert.pem smtpd_tls_cert_file = /etc/postfix/cert.pem smtpd_tls_key_file = /etc/postfix/key.pem smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:/var/run/smtpd_tls_session_cache smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom As far as I can tell everything is in order for a proper TLS Connection, and I am unsure what would need to change in main.cf or elsewhere for mail to send.

  Read the article

• Unable to connect to APNS with java-apns

  - by Mac

  I've got a Java program running on a firewalled server that is intended to send push notifications to my iPhone app by using java-apns. Problem is, whenever I try to send a notification the library fails to connect to the APNS server. From the stack trace, it seems that when creating the required SSL connection, the connection is being refused at some point (a java.net.ConnectException with a detail message of "connection refused" is being thrown when the library calls SSLSocketFactory's createSocket method). It would not surprise me at all if the firewall is blocking the connection, but unfortunately as I do not manage the server I am unable to verify that that is indeed the case. The fact that the program works fine from my (non-firewalled) desktop seems to support the theory. My question is, does anyone know of any method by which I can find the root cause of the problem, and/or can anyone tell me what I should tell the server admin to change to get things to work (if it is indeed the firewall that's the problem)? For reference, the server is a Linux box and I'm using version 0.1.2 of java-apns.

  Read the article

• Please help with System.Runtime.InteropServices.SEHException: External component has thrown an excep

  - by Brandon

  My aspx page gives me this error sometimes: External component has thrown an exception. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.SEHException: External component has thrown an exception. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SEHException (0x80004005): External component has thrown an exception.] Luxand.FSDK.Initialize(String DataFilesPath) +0 WebService.onLoad() +70 WebService..ctor() +91 facematch.Page_Load(Object sender, EventArgs e) +50 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +47 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1436

  Read the article

• Laptop LCD sometimes stops working on reboot. Please help.

  - by J Ringle

  I have a Gateway P-6831FX Laptop with Vista Ultimate. The Laptop LCD will sometimes not come on after I reboot the computer. I don't even close the lid and it happens. It isn't dim, it doesn't come on at all. No posting of CMOS (BIOS), nothing. Please note... this happens sometimes, not every time. Frustrating! When plugged into an external monitor, which works fine, Vista display properties can't even "sense" the laptop LCD. I try to enable the laptop LCD for dual display, turning on the laptop LCD, and it does nothing. It's like the laptop LCD is not even there. Manually taking a magnet in my hand to the laptop lid sensing switch (the sensor that turns off display/sleep mode when you close lid), sometimes causes the LCD backlight to "turn on" but not display any images. By "turn on" I mean I can see the screen backlight turn on to a 'dark gray' screen instead of pitch black. Subsequent reboot the laptop display is not working again! Here are the facts: Only happens at random and only after a reboot. Waking from Sleep mode isn't a problem. Pressing F4 function key for dual display does nothing when this happens. Closing lid doesn't seem to be related. (unless it is only after reboot.) using external magnet from laptop screen sensor sometimes triggers backlight to turn on but reboot back to square one with no LCD display. an external display always works fine. I have taken apart LCD, checked all wires and ribbons for loose connections or damage. I have replaced the Inverter. It doesn't seem to be heat related as I can put in sleep mode and resume fine when very hot. (external monitor works fine too). Sometimes the screen works fine as if there is not a problem at all. Even after a reboot... This is random. Any ideas out there? If it is a bad part... which one? The LCD seems to be fine. What are the odds of 2 bad inverters? The backlight is fine. The LCD wires/ribbons seem to be fine. I am at a loss. No warranty left and Gateway tech support is clueless. Thanks for any feedback that might help.

  Read the article

• How to handle external and internal DNS on windows 2012

  - by ThePopcorn

  I'm trying to setup an Active Directory network on Server 2012 R2, and want AD's DNS to only be used internally (Ex: domain-controller.company.com) as well as some records that need both internal and external accessibility (Ex: mail.company.com) that use internal IP's on the internal network and finally some records that only need external access. The only solutions i have been able to think of, or look up are to either use a sub domain that handles all internal records, and use the plain company.com domain for all external records. These both seem to mean i have to manage two DNS servers separately. Is either of these the best ways or am i messing up somewhere?

  Read the article

• Screen broken of mi laptop, start with an external monitor

  - by Widrogo

  hi now I have a big problem my brother broken the screen of mi laptop, now the replacement of my screen arrives in three weeks, now I can not lose three weeks because my homework be in my memory, now I need start the laptop with external monitor, I want to know if there is a way to boot from the boot my laptop because I have dual boot and password I can not access my laptop with an external monitor for this reason. Now there is a way to start my laptop directly to an external monitor. I look for a solution, I need to remove my broken laptop screen and automatically will recognize the vga monitor but did not work me now i look for a solution and find that i need

  Read the article

• How to separate Hyper-V Private network from the External network

  - by Ron Ratzlaff

  I am setting up a virtual test lab and I configured a domain controller VM running Windows 2008 R2 on my Hyper-V 2008 R2 server. I needed to download and install updates on it so I added an External NIC adapter and got that done. However, systems on my actual real physical domain were pulling IPs from this server and that was a big oopsy on my part so I immediately removed the External NIC adapter until I could find out how to go about keeping the Private and the External separate. If someone from the Server Fault community can help with this since I am pretty new to this, I would be very grateful. Thanks everyone.

  Read the article

• How to stop S.M.A.R.T check running for external hard drive

  - by gotqn

  I am using Windows 7 and I have enabled my "S.M.A.R.T" check, too. I have bought an external 1 TB USB hard drive. When it is connected with my computer, it delays my machine initial start with about 4-5 minutes. I was very confused at the begging, then disable the "S.M.A.R.T" check and see that the computer runs normally after restart. So, here is what I want to know: Why the check is turn for the external disk? Is there a way to use the "S.M.A.R.T" check only for my main hard drive? Why it takes 4 to 5 minutes more, as my both hard drives - internal/external are 1 TB?

  Read the article

• Home-Router: Access internal server using external ip [migrated]

  - by user15863

  If I've got a typical home router -- say a Net Gear -- which has certain ports forwarded to a internal server, is there a way to tweak the router to let me access that internal server using the external IP address from within the same network? Is there a non-enterprise grade router that can handle this type of thing? In case that was strangely worded, let me re-phrase with an example. My external IP is 1.2.3.4. My internal server is 10.4.3.100 Port 1178 is being forwarded from the router to 10.4.3.100. I'd like to be able to be able to hit 10.4.3.100 from an internal ip of 10.4.3.10 by using the external ip of 1.2.3.4. Possible?

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >