Search Results

Search found 4443 results on 178 pages for 'intel atom d510'.

Page 58/178 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Settings for multiple monitors are not stored

  - by JJD

  I am running Ubuntu 12.04. on a Lenovo Thinkpad T400. I connected an external monitor as a second display. The laptop stands under the external screen. The laptop has a native resolution of 1440x900 (16:10), the external monitor 1280x1024 (5:4). There are two graphic adapters: one internal Intel GMA 4500 MHD and an discrete ATI card. Currently, the integrated Intel is enabled. I use the Display application to arrange the position of the monitors so it look like this: The problem: Whenever I restart my computer the configuration gets lost. First, the displays are mirrored instead of extended. I have to press Fn + F7 two times to switch to extended mode. Second, the Display settings still look like this: I know this worked once when I was running Ubuntu 10.10. I cannot tell since when it does not work. Do you know how I can permanently store the settings?

  Read the article

• Kinetic Scroll in Maverick

  - by Shoaib

  I have Sony VAIO FW 230J laptop. I was using Lucid and upgraded my system to Maverick beta in September 2010. Although there were few issues with beta release on my system although I did not felt myself in any deadlock. The most notable experience on my ubuntu was the smooth and kinetic scrolling and very sensitive touch pad experience with finer control that was oddly normal in previous releases and even on windows 7 currently. Definitely this release of ubuntu is improved for touch UI experience. I believe that this is magic of 10.10. For my official system I waited until the final release was out. After installing (upgrading) official system to Maverick I am not feeling the same smooth and kinetic scroll experience. My laptop has Graphics: Intel DMA-X4500MHD while my official desktop has Graphics: Intel DMA-X4500HD Do I need to install or update some software package to have similar kinetic scroll experience?

  Read the article

• List of drivers for Samsung NP300E5Z-S08IN

  - by deostroll

  I am looking for a list of drivers for my samsung model mentioned in the title. For specs please visit the website. The laptop came with a version of free-dos installed. I overwrote that one with windows 7 entirely. The laptop also had shipped with it a software cd which had some driver software. Below are the list of software; I want to know the list of equivalent software I can get for ubuntu from the repo. Would want the list for Ubuntu 12.04 Chipset driver Intel ME Interface Driver Intel Rapid Storate Technology Graphics Driver NVidia graphics driver sound driver Lan driver wireless lan driver bluetooth driver touchpad driver Ps: don't forget to check the website for the specs

  Read the article

• How to resolve CGDirectDisplayID changing issues on newer multi-GPU Apple laptops in Core Foundation

  - by Dave Gallagher

  In Mac OS X, every display gets a unique CGDirectDisplayID number assigned to it. You can use CGGetActiveDisplayList() or [NSScreen screens] to access them, among others. Per Apple's docs: A display ID can persist across processes and system reboot, and typically remains constant as long as certain display parameters do not change. On newer mid-2010 MacBook Pro's, Apple started using auto-switching Intel/nVidia graphics. Laptops have two GPU's, a low-powered Intel, and a high-powered nVidia. Previous dual-GPU laptops (2009 models) didn't have auto-GPU switching, and required the user to make a settings change, logoff, and then logon again to make a GPU switch occur. Even older systems only had one GPU. There's an issue with the mid-2010 models where CGDirectDisplayID's don't remain the same when a display switches from one GPU to the next. For example: Laptop powers on. Built-In LCD Screen is driven by Intel chipset. Display ID: 30002 External Display is plugged in. Built-In LCD Screen switches to nVidia chipset. It's display ID changes: 30004 External Display is driven by nVidia chipset. ...at this point, the Intel chipset is dormant... User unplugs External Display. Built-In LCD Screen switches back to Intel chipset. It's display ID changes back to original: 30002 My question is, how can I match an old display ID to a new display ID when they alter due to a GPU change? Thought about: I've noticed that the display ID only changes by 2, but I don't have enough test Mac's available to determine if this is common to all new MacBook Pro's, or just mine. Kind of a kludge if "just check for display ID's which are +/-2 from one another" works, anyway. Tried: CGDisplayRegisterReconfigurationCallback(), which notifies before-and-after when displays are going to change, has no matching logic. Putting something like this inside a method registered with it doesn't work: // Run before display settings change: CGDirectDisplayID directDisplayID = ...; io_service_t servicePort = CGDisplayIOServicePort(directDisplayID); CFDictionaryRef oldInfoDict = IODisplayCreateInfoDictionary(servicePort, kIODisplayMatchingInfo); // ...display settings change... // Run after display settings change: CGDirectDisplayID directDisplayID = ...; io_service_t servicePort = CGDisplayIOServicePort(directDisplayID); CFDictionaryRef newInfoDict = IODisplayCreateInfoDictionary(servicePort, kIODisplayMatchingInfo); BOOL match = IODisplayMatchDictionaries(oldInfoDict, newInfoDict, 0); if (match) NSLog(@"Displays are a match"); else NSLog(@"Displays are not a match"); What's happening above is I'm caching oldInfoDict before display settings change, letting them change, and then comparing it to newInfoDict by using IODisplayMatchDictionaries(), which will say either "yes, both displays are the same!" or "no, both displays are not the same." Unfortunately, it does not return YES if GPU's have changed for a monitor. Example of the dictionary's it's comparing: // oldInfoDict (Display ID: 30002) oldInfoDict: { DisplayProductID = 40144; DisplayVendorID = 1552; IODisplayLocation = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2/AppleIntelFramebuffer/display0/AppleBacklightDisplay"; } // newInfoDict (Display ID: 30004) newInfoDict: { DisplayProductID = 40144; DisplayVendorID = 1552; IODisplayLocation = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P0P2@1/IOPCI2PCIBridge/GFX0@0/NVDA,Display-A@0/NVDA/display0/AppleBacklightDisplay"; } As you can see, the IODisplayLocation key changes when GPU's are switched, hence IODisplayMatchDictionaries() doesn't work. I can, theoretically, compared just the DisplayProductID and DisplayVendorID keys, but I'm writing end-user software, and am worried of a situation where users have two or more identical monitors plugged in. Any help is greatly appreciated! :)

  Read the article

• Oracle Solaris Studio Express 6/10 and its Customer Feedback Program are now available

  - by pieter.humphrey

  Oracle Solaris Studio Express 6/10 and the Customer Feedback Program for it are now available. Oracle Solaris Studio Express 6/10 is available on Solaris 10 (SPARC, x86), OEL 5 (x86), RHEL 5 (x86), SuSE 11 (x86) today and will be available for OpenSolaris in the near future. New feature highlights since the last release include: C/C++/Fortran compiler optimizations for the latest UltraSPARC and SPARC64-based architectures such as UltraSPARC T2 and SPARC64 VII C/C++/Fortran compiler optimizations for the latest x86 architectures including the Intel Xeon 7500 processor series (Nehalem-EX) and the Intel Xeon 5600 processor series (Westmere-EP) Enhanced debugging and code coverage tooling Improved application profiling with the Performance Analyzer Updated IDE based on NetBeans 6.8 To find more information and download go to http://developers.sun.com/sunstudio/downloads/express/ To participate in the customer feedback program for Oracle Solaris Studio Express 6/10 go to http://developers.sun.com/sunstudio/customerfeedback/index.jsp Please get the word out, try out this new release and send us your feedback! Technorati Tags: developer,development,solaris,sparc,Oracle Solaris Studio,Solaris Studio,Sun Studio,oracle,otn del.icio.us Tags: developer,development,solaris,sparc,Oracle Solaris Studio,Solaris Studio,Sun Studio,oracle,otn

  Read the article

• Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

  - by Anega

  Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

  Read the article

• Micromax 3G mobile internet modem not being detected

  - by arjith

  I have Micromax 3G modem, and i inserted it in the USB port, but it is not being detected by Ubuntu 12.04, that i'm using from a Live USB. I tried creating a mobile internet connection, however, eventhough i created it, there is no option to connect. I had previously used 11.10 Ubuntu, and it had automatically detected the datastick modem and asked me to create a connection. On typing lsusb in the terminal it gives the following: **Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 03f0:5307 Hewlett-Packard Bus 001 Device 008: ID 1c9e:9605 OMEGA TECHNOLOGY Bus 001 Device 006: ID 5986:0364 Acer, Inc tried to insert the modem before boot, with negative results **

  Read the article

• Standby Problem, PC can not enter Standby mode

  - by Leon95

  I have a problem with the Standby function: My Computer does not enter the Standby mode with Ubuntu 14.04LTS. If I remeber me right it, works with Ubuntu 13.10 but this Version was not long installed on this PC. Now when i press Standby in the menu or on my Keyboard the Display turns black for a few seconds, then some messages appear for a very short moment on the screen. After that, the the log-in screen appear. Two times I was able to enter Standby but the other times it fails. Tecnical Data about my PC: Ubuntu 14.04 with all Updates main storage: 3,8GiBprocessor: Intel® Core™ i3-2330M CPU @ 2.20GHz × 4 graphic: Intel® Sandybridge Mobile graphic board: NVIDA GEFORCE GT 555M CUDA 1GB Dual Boot System with win7 x64Bit Medion P6812 Laptop Here is the message output: Usally I got only a half of the screen filled with messages like that. When I filmed it it was much more. I dont know, maybe this is a Bug.

  Read the article

• Monitor blinking

  - by Shark

  Hi I have Ubuntu 10.04, my laptop is ASUS k50ij, intel duo t3000, 2gb ram, 320 HDD, intel gma 4500M video card. My problem is that a couple days ago my monitor had start blinking for a few seconds. Then it stops and begins the same behaviour let's say in next 2 hours. What am i missing here? Another funny problem is that when i give more or less brightness to monitor the pop up window shows and giving "Power information: Laptop battery is charged". When my brightness is lower the blinking increases and vice versa. thx for help

  Read the article

• External USB 3 drive not recognized

  - by ilan123

  Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

  Read the article

• Invert regexp in vim

  - by Chris J

  There's a few "how do I invert a regexp" questions here on stackoverflow, but I can't find one for vim (if it does exist, by goggle-fu is lacking today). In essence I want to match all non-printable characters and delete them. I could write a short script, or drop to a shell and use tr or something similar to delete, but a vim solution would be dandy :-) Vim has the atom \p to match printable characters, however trying to do this :s/[^\p]//g to match the inverse failed and just left me with every 'p' in the file. I've seen the (?!xxx) sequence in other questions, and vim seems to not recognise this sequence. I've not found seen an atom for non-printable chars. In the interim, I'm going to drop to external tools, but if anyone's got any trick up their sleeve to do this, it'd be welcome :-) Ta!

  Read the article

• Cluster failover and strange gratuitous arp behavior

  - by lazerpld

  I am experiencing a strange Windows 2008R2 cluster related issue that is bothering me. I feel that I have come close as to what the issue is, but still don't fully understand what is happening. I have a two node exchange 2007 cluster running on two 2008R2 servers. The exchange cluster application works fine when running on the "primary" cluster node. The problem occurs when failing over the cluster ressource to the secondary node. When failing over the cluster to the "secondary" node, which for instance is on the same subnet as the "primary", the failover initially works ok and the cluster ressource continues to work for a couple of minutes on the new node. Which means that the recieving node does send out a gratuitous arp reply packet that updated the arp tables on the network. But after x amount of time (typically within 5 minutes time) something updates the arp-tables again because all of a sudden the cluster service does not answer to pings. So basically I start a ping to the exchange cluster address when its running on the "primary node". It works just great. I failover the cluster ressource group to the "secondary node" and I only have loss of one ping which is acceptable. The cluster ressource still answers for some time after being failed over and all of a sudden the ping starts timing out. This is telling me that the arp table initially is updated by the secondary node, but then something (which I haven't found out yet) wrongfully updates it again, probably with the primary node's MAC. Why does this happen - has anyone experienced the same problem? The cluster is NOT running NLB and the problem stops immidiately after failing over back to the primary node where there are no problems. Each node is using NIC teaming (intel) with ALB. Each node is on the same subnet and has gateway and so on entered correctly as far as I am concerned. Edit: I was wondering if it could be related to network binding order maybe? Because I have noticed that the only difference I can see from node to node is when showing the local arp table. On the "primary" node the arp table is generated on the cluster address as the source. While on the "secondary" its generated from the nodes own network card. Any input on this? Edit: Ok here is the connection layout. Cluster address: A.B.6.208/25 Exchange application address: A.B.6.212/25 Node A: 3 physical nics. Two teamed using intels teaming with the address A.B.6.210/25 called public The last one used for cluster traffic called private with 10.0.0.138/24 Node B: 3 physical nics. Two teamed using intels teaming with the address A.B.6.211/25 called public The last one used for cluster traffic called private with 10.0.0.139/24 Each node sits in a seperate datacenter connected together. End switches being cisco in DC1 and NEXUS 5000/2000 in DC2. Edit: I have been testing a little more. I have now created an empty application on the same cluster, and given it another ip address on the same subnet as the exchange application. After failing this empty application over, I see the exact same problem occuring. After one or two minutes clients on other subnets cannot ping the virtual ip of the application. But while clients on other subnets cannot, another server from another cluster on the same subnet has no trouble pinging. But if i then make another failover to the original state, then the situation is the opposite. So now clients on same subnet cannot, and on other they can. We have another cluster set up the same way and on the same subnet, with the same intel network cards, the same drivers and same teaming settings. Here we are not seeing this. So its somewhat confusing. Edit: OK done some more research. Removed the NIC teaming of the secondary node, since it didnt work anyway. After some standard problems following that, I finally managed to get it up and running again with the old NIC teaming settings on one single physical network card. Now I am not able to reproduce the problem described above. So it is somehow related to the teaming - maybe some kind of bug? Edit: Did some more failing over without being able to make it fail. So removing the NIC team looks like it was a workaround. Now I tried to reestablish the intel NIC teaming with ALB (as it was before) and i still cannot make it fail. This is annoying due to the fact that now i actually cannot pinpoint the root of the problem. Now it just seems to be some kind of MS/intel hick-up - which is hard to accept because what if the problem reoccurs in 14 days? There is a strange thing that happened though. After recreating the NIC team I was not able to rename the team to "PUBLIC" which the old team was called. So something has not been cleaned up in windows - although the server HAS been restarted! Edit: OK after restablishing the ALB teaming the error came back. So I am now going to do some thorough testing and i will get back with my observations. One thing is for sure. It is related to Intel 82575EB NICS, ALB and Gratuitous Arp.

  Read the article

• Screen Brightness not adjustable for Acer Aspire S3

  - by Kakadu90

  First of all, thank you very much for providing this useful forum. Too bad for me, there is no support for the Acer Aspire S3 yet (just came out in October) Short Description of the Problem: I cannot adjust the screen brightness. Neither Compiz nor the FN Key combination work. Also the fan keeps running on full power. As you can guess, both of these drain my battery. The Setup: Acer Aspire S3, Intel i5 newest Generation, Intel HD3000 Grafic Accelerator (no driver maybe?) Thanks in advance, Kakadu90

  Read the article

• Can't connect to WIFI after sleep Ubuntu 14.04

  - by user3380404

  After an upgrade over a previous version to Ubuntu 14.04 I have problems with connecting to WiFi. After suspending it won't reconnect to any existing network unless I restart the laptop. sudo lshw -C network: *-network description: Ethernet interface product: 82567LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:27:13:b4:d3:58 capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k firmware=1.8-3 latency=0 link=no multicast=yes port=twisted pair resources: irq:45 memory:fc200000-fc21ffff memory:fc225000-fc225fff ioport:1840(size=32) *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:26:c6:c6:6b:c8 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-29-generic firmware=8.83.5.1 build 33692 ip=10.0.1.160 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:48 memory:f4200000-f4201fff

  Read the article

• Bluetooth not really "turning on" on a Sony Vaio VPCEG

  - by marcioAlmada

  On a Sony Vaio VPCEG, bluetooth is not working properly: The gnome-shell bluetooth indicator (at the main bar) shows the bluetooth is on, but when I try to switch visibility on it simply doesn't turn on. When I open the bluetooth configuration dialog, the on/off indicator shows me the bluetooth is off. And when I try to turn it on it simply does not turn on. The following is outputted by lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0c45:64be Microdia Bus 001 Device 004: ID 0489:e027 Foxconn / Hon Hai Bus 002 Device 014: ID 4971:ce22 SimpleTech ====== Update: Output from rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: sony-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: sony-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no What should I do to really activate the bluetooth?

  Read the article

• Why do webpages take longer to loo in ubuntu 12.04 than Windows 7

  - by Emil Abraham

  For example, when I click on a Facebook picture, the picture remains pixelated for about 30 seconds, then starts to clear up. Or when I watch YouTube videos, I can't watch them on HD without running into buffer issues. Windows 7 is just much snappier. It might be an issue with the graphics card. Dualbooting Windows 7 64bit & Ubuntu 12.04 64 bit Specs: CPU: Intel® Core™ i7-2630QM CPU @ 2.00GHz × 8 RAM: 8GB DDR3 HDD: 50 GB to Ubuntu & Remaining 1.5 TB to Windows The interesting part: Graphics Card: On System Settings in Ubuntu: Intel® Sandybridge Mobile Graphics Card: What it should be: Radeon™ HD 7690M XT switchable graphics with 1024MB GDDR5 and up to 5093MB total graphics memory

  Read the article

• Ubuntu 10.04 LTS consomme plus d'énergie que Windows 7, la distribution Linux est-elle trop gourmand

  Ubuntu 10.04 LTS consomme plus d'énergie que Windows 7, la distribution Linux est-elle trop gourmande ? Ubuntu 10.04 LTS est une distribution Linux mobile, optimisée pour les ordinateurs portables et les netbooks. C'est du moins ainsi qu'elle est présentée. Mais les tests réalisés par des journalistes américains démontrent plutôt le contaire. La consommation électrique de deux ordinateurs portables fonctionnant sous Windows 7 et l'Ubuntu 10.04 LTS a été mesurée et comparée. Il s'agissait d'un Asus Eee PC 1201N (Intel Atom 330 et solution graphique NVIDIA GeForce 9400M) et d'un Lenovo ThinkPad T61 (Intel Core 2 Duo T9300 et une carte graphique NVIDIA Quadro NVS 140M). Les tests ont été effectués avec le pilote graphique d'origine et...

  Read the article

• Save Windows 8 Files and Install Ubuntu

  - by Nika

  I would like to install Ubuntu on my laptop. I am new to Ubuntu and therefore have some questions: 1.My hardware is Acer Emachines Intel Celeron T3000 1.8 3 Gig of Ram and Native Intel Intergrated graphics card. Can I run Ubuntu on this machine without any problems? 2.I am windows user and currently have windows 8. I want to install ubuntu but want to save all my directories on C:\ D:\ disks so that I can open my files in ubuntu. Is it possible to save my current directory system and save all my files after installing ubuntu? Can I open all my files? I have very important data in files so I dont want to lose them at all :) Thank You

  Read the article

• Flash player (in Firefox) is unstable in 14.04

  - by henry

  For 13.10, I used this guide to get Intel iGPU-supported playback of flash videos in Firefox: http://www.webupd8.org/2013/09/adobe-flash-player-hardware.html All in all, Intel graphics acceleration for flash content was working just fine in 13.10, at least on my machine (with Xubuntu). I basically followed the guide to do the same for 14.04, but about 2-3 weeks ago flash videos started acting up. Whenever I have one instance of flash paused or stopped in one tab and go to the next tab to continue some song on Soundcloud or something, it's game over. I'm clueless as to what I can do here. Did anything change in the meantime?

  Read the article

• Does mod_rewrite in subdirectories' .htaccess override higher levels?

  - by Ryan

  I'm using mod_rewrite to map my old directory structure to a new one. I have the following rule in my top-level .htaccess file, and it works: RewriteEngine On RewriteCond %{REQUEST_URI} /blog/archives/(.*) RewriteRule ^.*$ /archives/%1 [L,R=301] As you can guess, this takes http://example.com/blog/archives/00001.php and redirects it to http://example.com/archives/00001.php. But when I add these rewrite rules to the .htaccess file in the /blog directory RewriteEngine on RewriteRule atom.xml$ /atom.xml [L,R=301] the top-level redirect no longer works. If I move the rule in the /blog .htaccess file to the top-levle file both rules work. Can someone explain what is happening here?

  Read the article

• Which version of ubuntu is compatible with ACER Aspire 5732Z?

  - by Mehdi Bateni

  I have an ACER Aspire 5732Z Laptop, and 6 days ago I have installed Ubuntu 11.10 on my laptop, But I found black screen in login. I have tried a lot of ways to solve this problem, but there is no way. So can you tell me which version is compatible with this ACER Aspire (5732Z)? Detail: Intel-Pentium-processor T4400 (2.2 GHz, 800 MHz FSB), Intel-GMA 4500M, 15.6" HD LCD, 2GB Memory, 320 GB HDD, Acer Nplify(TM) 802.11b/g/n. Thank You. .. And finally, I found that Linux Mint is best for my ACER-ASPIRE5732Z. It is also compatible with Ubuntu codes, because as I know it is base on Ubuntu.

  Read the article

• Periodic clicking sound from PC speaker

  - by John J. Camilleri

  After an update some months ago, my laptop has begun making a low, repeated clicking sound every few seconds. It is not being generated through the regular sound system, as altering the volume and even muting the sound does not make any difference. My regular audio works fine, by the way, so I am guessing this is some sort of PC speaker, since I cannot hear the click when I listen through regular headphones. Strangely, when I open the sound settings dialog the click magically disappears. I don't need to change any settings; if I simply leave the dialog open in the background then the problem disappears. Any ideas what this could be? I am running regular Ubuntu 12.04, and this is the output from lspci -v | grep -A7 -i "audio": 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: Acer Incorporated [ALI] Device 0349 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 54200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• Thinkpad brightness steps error using FN+Home/End

  - by petermolnar

  I've met the following problem: normally my T400 (Lenovo Thinkpad) has 16 steps of brightness, and Windows utilizes it correctly. After a fresh install & minor tweaks Mint 12 (which is based on 11.10 Ubuntu) I only had 6 steps which was way to few. Listing /sys/class/backlight showed 3 entried. I removed the acpi-tools package, one of the disapperared - and I now have 10 steps! Therefore I think if I can reduce the entries to 1 I'm going to have 16 steps, since the stepping will be 1 instead of 2 (or 3). /sys/class/backlight/ intel_backlight -> ../../devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1/intel_backlight thinkpad_screen -> ../../devices/virtual/backlight/thinkpad_screen The problem is that I'm unable to trace back what are the configs / daemons / kernel options triggers these two. More strangely, I discovered a strange behaviour. I monitored watch -n1 "cat /sys/class/backlight/thinkpad_screen/actual_brightness" and watch -n1 "cat /sys/class/backlight/intel_backlight/actual_brightness" while changing the brightness with FN+home/end combinations from max to min. The outcome is the following: brighness intel thinkpad --------- ----- -------- MAX 2408475 7 | 1955115 5 | 1435640 3 | 1246740 1 | 1086175 0 | 1010615 6 | 859495 4 | 689485 2 v 481695 0 MIN 217235 0 brighness intel thinkpad --------- ----- -------- MIN 217235 0 | 481695 2 | 689485 4 | 859495 6 | 1010615 7 | 1086175 1 | 1246740 3 | 1435640 5 v 1955115 7 MAX 2408475 0 When stepping from MIN to MAX, there's no difference between the last 2 steps. Also, the OSD icon (Cinnamon desktop, default theme) goes from full to min in 4 steps and from full to min once again in 4 steps. So... it seems that the intel entry is working correctly, showing correct values. The thinkpad entry however twists the things and even showing incorrect values. Does anyone have any idea how to get rid of the thinkpad entry? System data: Linux Mint 12 3.0.0-16 kernel Lenovo ThinkPad T400 Cinnamon 1.4 desktop For any additional info, please tell me what do you need. EDIT I'm sorry, I forgot to mention, I added acpi_backlight=vendor to GRUB cmdline as well, this is the result of the semi-better working than the default.

  Read the article

• How to review the current state of open source vs. closed source graphics drivers?

  - by Bucic

  How to know whether it's worth it to replace open source drivers installed by default with proprietary ones. Are there any benchmarks? Major known issues summaries. I don't mean 'at the time of writing this post'. I mean an up-to-date status on how the drivers compare. This page https://help.ubuntu.com/community/BinaryDriverHowto/ certainly doesn't do much on the matter, nor it even mentions Intel. EDIT: I've just learned there is no Intel proprietary driver because they made their drivers open source http://askubuntu.com/a/17395/29347

  Read the article

• Keep getting messages about internal system errors

  - by Tomas Lycken

  I keep getting popups about internal system errors (see screenshot below) on irregular intervals (several times a day), that I don't know what to do about. If I continue through the dialog and try to report the error back to the Ubuntu project, I get a message stating that development on this version of Ubuntu has been completed, and that I should ask for help here if I don't know what to do about it. I don't. If I show the details of the error message, the "executable path" parameter shows /usr/share/apport/apport-gpu-error-intel.py. Is this a bug I should report to Launchpad, or just a configuration error somewhere? If it's a bug, how do I collect the data I (and the devs) need? Update in response to comment: I am running an ASUS N53SN, sporting an Intel Core i7 2630QM CPU and an NVidia GeForce 550M GPU.

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >