Search Results

Search found 5873 results on 235 pages for 'raster graphics'.

Page 58/235 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

  • Samsung S23A750D 23" 120Hz get no signal

    - by John Carter
    I have a few days ago received this monitor. Samsung S23A750D 23" 120Hz I am using it with a Gainward Nvidia GTX570 Phantom GPU via DisplayPort cabling. The trouble I am having is that the monitor has great trouble picking up a signal from the GPU when the computer has gone into sleep mode or been switched off (at this point I can get a signal to the monitor). It's only when I turn the computer back on and then the monitor that I get no signal. To get a signal I have to remove the power cable and put back in or sometimes remove the DP cable and put back in. I have tried not turning the monitor off (the monitor goes into a sleep mode when the computer goes into sleep mode) but on putting the computer on it does not pick up a signal. It is only by removing the power cable and/or DisplayPort cable will I get a signal. And this is intermittent. I have tried upgrading the firmware from Samsung but this hasn't helped. Any ideas?

    Read the article

  • Creating Arrows Easily for Images

    - by Nitrodist
    I'm looking for a plugin or something along those lines for creating arrows for an image I'm working on. Basically it's just a screenshot of some software, but I want to annotate it and have arrows on it pointing to the various components. It should look something like this or even something simpler. The problem is that there doesn't seem to be an easy, free way of creating good arrows for any of the screenshots, short of importing actual images of arrows! I prefer to use: GIMP Paint.NET Other free software (beer or freedom, whichever) What are my alternatives? I really want to stay away from Photoshop on this. Thanks.

    Read the article

  • Is there analog of aticonfig --set-powerstate for open source radeon driver?

    - by vava
    I'm running Ubuntu 9.04 on relatively old laptop with ATI Mobility x600 inside. On the last version of Ubuntu, when I was able to run proprietary fglrx driver, I was able to slow down graphic card by aticonfig --set-powerstate 1 and save some battery charge. Now I forced to run open source driver as ATI decided to drop support for old cards. But I can't find a way to control power states now except relying on DynamicClocks option in xorg.conf. But I really know better when and what powerstate I want, so is there a tool that let me change power state manually or at least let me somehow change the behavior of automatic power state selection?

    Read the article

  • What is causing sudden freezing during running real-time program?

    - by Trevor Boyd Smith
    So I run a high intensive (CPU/GPU) real-time program. During normal execution suddenly everything freezes for 1-4 seconds. I opened "Process Explorer" in the background to help gain insight and maybe identify something. Here is what the CPU/GPU graphs looks like when I align them in time: Notice the 4 distinct drops in both the CPU/GPU. You can see that it goes from some sort of positive CPU/GPU usage to almost zero. These drops in the graph align with when the real-time program suddenly freezes. How do I find what is causing these sudden drops? NOTE: When you put your mouse over the graph it tells you the time, accurate to the second, for where your cursor is. Maybe this mouse over feature could be helpful in some way (e.g. what if you had a log of all processes every 100ms). EDIT: The real-time program is a video game and so I can't watch some sort of instrumentation while the video game is running. I need a solution that let's you look back in time somehow to see what was happening when the slow down occurred. EDIT: RE - Recording Data vs using real-time monitor: So the windows performance recorder is for some reason not recording what I expect it to record. So I switched to using "perfmon" and then opening it's "resource monitor". RE - Setting it up so I can view real-time monitor: In the video game I set it to spectate and then put the video game in "windowed" mode so that I can view the real time display that Resource Monitor has. Now that I can get semi-real time (only once per second... how do you get more than once per second?) I started looking at the various real time data readouts. Getting to the cause: I noticed a strong correlation in high disk IO and low CPU usage (which is also seen by having in-game freezing). How do you use resource monitor to find out who is doing all this offending disk IO?

    Read the article

  • Anti Aliasing dead

    - by Gazoza
    I have a problem with anti-aliasing. No matter the software settings, it seems to be gone. I tried driver updating and reinstalling, cleaning of the hardware, different monitor with different cablies, OS reinstalling and changing, none of which helped. I decided to change the graphic card, but that didn't work either. Moreover, I have a distinct impression that the jagged edges are worsening as time goes by. I think this is a hardware-related issue, but I don't know exactly what to do. If anyone here had similar troubles, and/or has an idea how to cope with them, I'd be very grateful. My current card is a nVidia GT610.

    Read the article

  • 3D plotting in Ubuntu

    - by Bakhtiyor
    I have Ubuntu 10.10 installed and need to plot 3D graphic. I have installed several free applications available in the repository, like QtiPlot and GNU Octave. I have found out and created the following graphic. Now I have to show in the same graphic the position of my experiment results, which consist of elements with three parameters: X, Y and Z coordinates which had been calculated with the same function as above graphic. Any idea to do that? Would be better if you propose solution in free apps,because there are several proprietary apps like Maple or MATLAB. Thank you very much. UPDATE 1 The final result should be more or less like this:

    Read the article

  • How to play games in widescreen in Windows 7, Dell Studio 1555

    - by blasteralfred
    I have a dell studio 1555 laptop with a GPU inside. The details are below; Hardware details Software details I can play games in widescreen in Vista, but not in 7. I am using Windows 7 Home Premium. I have the latest Catalyst Control Center. Instead of widescreen, the games are running in a classic style, say 1024x768 ratio. When I play need for speed underground, the maximum possible resolution is 1024x768 (all other games are like this). I have no problem with HD videos and anything else. How can I fix this? Thanks in advance...:)

    Read the article

  • Increasing Screen Resolution to more than limit and scaling to origional

    - by Akshat Mittal
    I have a laptop, with Screen Resolution - 1366x768 (most common) - I want to increase it further to 1600x900 (or higher), in the same ratio. I want to scale the higher resolution on my current screen to fit it. I found xrandr with command xrandr --output LVDS1 --scale 1.4x1.4, this worked but again resulted to another problem, it does the scaling thing but the cursor is still blocked into the native screen resolution and I am not able to move it further, I found that the bug is already filed here. Also this command was only for Linux, I wanted to do this thing with both Linux and Windows (including Windows 8). I want a similar software that is bug free (at least not a major bug like this) and that supports Windows as well (or two separate software for Windows and Linux). Any help is appreciated and Thanks in advance.

    Read the article

  • Multi-Page PDF Banner/Poster from PDF

    - by Tim Lytle
    I'm looking for a utility that will take one large sized PDF, and split it into smaller PDFs for banner/poster printing. Looking for a linux or multi-platform solution. More Background My goal is to take an Inkscape document and generate a PDF, then print it on a printer that doesn't do banner/poster printing automatically - so if there's a better solution, I'd be happy to hear that as well. I've found exporting as a PNG both takes a while, and sometimes blends are not preserved. Printing as PDF (Ubuntu print-to-file) seems to work well. I've found utilities that can take large images formats and generate multipage PDFs, but not PDF to PDF.

    Read the article

  • Is this video card good for 3 monitors? [on hold]

    - by Brian Briu
    Video card: http://www.amazon.de/Zotac-NVIDIA-GeForce-Grafikkarte-Speicher/dp/B00D4KCSHG/ref=sr_1_11?ie=UTF8&qid=1408575042&sr=8-11&keywords=grafikkarte 3 Monitors like this: http://www.mediamarkt.de/mcs/product/ASUS-MX-239-H,48353,462790,951629.html?langId=-3 If yes how can I connect them? If no, i'll buy one more video card like that. Also tell me what motherboard should I buy for these things + 32 ram and i7 (remember that in the future i'll buy one morre video card (to have 2). Power supply also?

    Read the article

  • Radeon HD4850 serious issues when using DirectX 10

    - by ricsmania
    Hello, I have a problem with my video card. Whenever I run a DirectX 10 game, it works for a few seconds (10 or so) and then starts displaying nothing but big polygons. I have tested this with Crysis and Resident Evil 5, both have the same problems. The same games running under DirectX 9 work fine, except for some small black squares once in a while. I have the following specs: Asus P7P55D LE Intel Core i5 750 Sapphire Radeon HD4850 1GB 2x2GB Patriot Viper II Sector 5, DDR3 1600 MHz OCZ Stealth X Stream 500SXS 500W At first I thought it could be the video card overheating (it has stock cooling), but the game crashes even when it's running at 50 degrees C, and it's never been higher than 70. I also thought it could be the PSU, but as far as I know 500W is enough for this computer, especially because I haven't overclocked anything. My OS is Windows 7 X64 and I am using Catalyst 10.10, but I have also tried many older versions with no success. I don't think there is a problem with the card itself, or else it wouldn't run DirectX 9 games I believe. I have spent many hours searching for a solution but I couldn't, so any help is appreciated. Thank you. EDIT: I did some further investigation about the problem, and it seems taspeotis was right, it might be related to memory. I slightly underclocked the memory from 993 to 965 MHz and the problem went away completely. Both the black squares using DirectX 9 and the weird polygons using DirectX 10. I was using RE DirectX 10 Benchmark, as it consistently crashed around the same point, and now I can play the full benchmark with no artifacts at all. Unfortunately, the underclock has an obvious hit in performance. Although it's not critical, it's definitely noticeable. So, if the video memory test software showed no erros, but the card needs an underclock to work, what might be the problem? Temperature? Voltage? By the way, I couldn't find what the default voltage for this card is. And what is a good software to try and increase it? I tried Ati Tray Tools but it has a bug that increases the clock speed dramatically whenever I change something in the Overclock tab, so I'm afraid it might fry my card. Worst case scenario, if I don't find I solution I will try to slightly increase the GPU clock to compensate for the memory clock. Thank you again.

    Read the article

  • Intel GMA 4500MHD flickering in opengl

    - by Aaron
    I have an application that uses OpenGL for its display. When this application is run on a laptop with an Intel GMA 4500MHD on Windows XP the OpenGL content appears to flicker/shudder between 2 frames. I have experienced the exact same problem when running this application on nVidia Quadro FX hardware, however with nVidia the problem can be corrected by disabling the "Unified Back Buffer" (UBB) feature in the driver. Does anybody know how I can disable the corresponding feature in the Intel driver?

    Read the article

  • How to set TV-out options under Linux of an Geforce 9600 GT video card

    - by polemon
    I'm using the TV-out connector of my Geforce 9600 GT to connect it to an old TV set. It's obviously in Composite mode, the other two cables of Component video are dead, only Pb/VIDEO labeled one gives me a signal. The picture appears black/white on the TV, I presume it's because the video card gives me an NTSC signal, but it's a PAL tv set. How do I change the TV-out from NTSC to PAL? My Component to SCART adapter hasn't arrived yet, but I think I should be able to set manually, whether the signal should be Composite or Component. How do I switch modes of the TV-out, between Component and Composite? I'm running Linux, so it's probably some settings I need to make in xorg.conf. Edit: I got this far: I need to set in the "Device" section of my xorg.conf: Option "TVStandard" "PAL-B" Option "TVOutFormat" "COMPOSITE" The whole section looks like this now: Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9600 GT" Option "AddARGBGLXVisuals" "True" Option "TVStandard" "PAL-B" Option "TVOutFormat" "COMPOSITE" EndSection How can I list all available settings for "TVStandard" and "TVOutFormat"?

    Read the article

  • TIF opens via IE, but not within a page

    - by tsilb
    I have a picture: http://www.kconnolly.net/Gallery/Panoramas/Mountainscapes/DSCN2049_stitch_sm.tif Which loads fine when I paste it into my address bar. However, when I embed it within a Page, I get a broken image icon. However, all browsers treat it as a download. Conversely, this image, which was made the same way, works fine when I embed it within a Page. Browsers treat this as a Document and not as a Download: http://www.kconnolly.net/Gallery/Panoramas/Mountainscapes/DSCN2060_stitch_sm.tif Why is that?

    Read the article

  • Monitor weirdness/flickering with new Viao PCG-3112L

    - by Rosarch
    I have a Sony VAIO PCG-3112L running Windows 7. It worked fine on one monitor, but now I'm using it with a 2 year old LG Flatron W2252TQ-TF. The colors are sorta off (although that might just be the monitor), but more annoyingly there are many horizontal flickering lines. It's more noticeable on non-white backgrounds. I tried rebooting the monitor, and reseting it to factory settings, but that didn't solve the issue. What could be the cause of this? The monitor works fine with an Asus netbook. I have checked that both ends of the VGA cable are plugged in between the Vaio and the monitor.

    Read the article

  • ATI Radeon HD 5770 Cooling

    - by Murtez
    I have a Radeon HD 5770 manufactured by ATI. In the course of using compressed air to clean it the fan shattered. I put a case fan on the card to cool it, but it's not doing a great job; the temperature goes to nearly 100 sometimes. The card is not overclocked or anything, the PC itself is clean. I looked around for a third party cooling system but the only one I found was the Accelero L2 Pro. It's low on stock and I don't know how great it will be, some review say it may not fit on all 5770 cards. Does anyone know of another one that will work? Help is much appreciated.

    Read the article

  • MacPro 1,1 video's card

    - by alexus
    I just bought a Mac Pro 1,1 from my coworkers and I'm looking to upgrade video card as the one inside is very noisy. What are my options? Basically I'm not looking to spend a lot of money, in fact i'd rather to spend as little as possible and get low end or mid range card, I'm not really playing games all that much so pretty much anything will do, I'd prefer 2xx series though. Current Mac Pro sells w/ GT120, Apple sells upgrade kit for $149 (which is okay, I just not sure if I'll be able to use this card on such an old Mac Pro)

    Read the article

  • Saving each layer of a Photoshop image to separate files

    - by BadKnees
    I have a PSD file with all icons in separate layers as vectors. I would like to save them in different sizes to use in iPhone, iPhone4 and iPad. I tried Files Scripts Export Layers to Files That took about 15 minutes to save each layer while the computer was overheating from the work. Tried with two different computers, one with CS4 and the other with CS5. Same result. And that doesn't allow me to set sizes. Seem like most icon packs, like pictos, glyphish and iconsweets are distributed in this way, in one PSD file. Is some easy way to get them out of the PSD and into PNG files?

    Read the article

  • How to Find Out What Version of Display Driver is Installed

    - by Artium
    One of my favorite games, "Wolfenstein Enemy Territory", has stopped working lately. It throws a segfault during the initialization phase. I suspect that the reason is a recent update to the video card driver. The problem started after I updated Ubuntu but I do not remember if there was a driver update in the list. My question is how can I check this. How can I view the current version of the display driver installed and the date it was last updated? If I discover that this is indeed the problem, will it be possible to revert the update and stay with the previous version of the driver?

    Read the article

  • Turn Windows 7 desktop into grayscale

    - by Axarydax
    Is there a universal way to turn Windows 7 Aero desktop, all windows, etc into grayscale? I had an option to do this in Intel video drivers on my old laptop, now I have NVIDIA and don't know how to replicate this effect. There might be a shader or filter that would cause Aero to render stuff into grayscale, but I was unable to find anything. Or must it be explicitly supported by video driver as a bonus?

    Read the article

  • Using 4 monitors with 2 generic video cards... possible?

    - by Ikram
    I'm thinking of setting up 4 monitors in a grid, using two video cards, one card to feed each pair of monitors through the card's two DVI ports. The most important requirement for me is to have the grid of monitors act as one single huge screen. Is this scenario possible by using two generic cards like Radeon 4870s on a Windows 7 computer? (I've heard of Eyefinity, but 4870s don't have it) Another issue is that I only have one PCI-Express slot on my computer's motherboard, therefore I'll need to use one of the lesser PCI cards as the second video card. Will this pose problems?

    Read the article

  • Render a 3D image as a 2D vector image

    - by Clinton Blackmore
    Is there any software that will take a 3d model (in any format) and allow you to render it as a 2D vector image (preferable as either an .SVG or .PDF)? My intention is to render LEGO building instructions this way. While there are many tools that let you view them or generate nice, rasterized output, I'd really like to be able to generate vectorized output. Textures are not needed, and hidden line removal may not be needed. I could use a tool that works on any platform (although my preference is OS X, Linux, then Windows). Open source is preferred. If no one knows of a tool that does this, does anyone have a good recommendation of something to hack on and add a feature to output via Cairo?

    Read the article

  • Mountain Lion screen crashes after returning from sleep

    - by Aron Rotteveel
    During the past 3 days I have experienced the following issue: when returning from sleep, I see an extremely garbled version of my desktop. The only thing that seems to help is a reboot. My first guess is that this is related to the video card. After looking into this issue, I found a lot of problems related to ML and returning from sleep, such as this post on AskDifferent, but I think this is a different issue because it does not speak of a garbled screen. Some more details: System: MacBook Pro 15" early 2011, 2,2GHZ I7, 8GB Ram, AMD Radeon HD6750M 1024 The issue seems to happen only when I open my laptop in the morning; if I close and open my laptop during the day, it does not seem to happen. The issue 'solves' when rebooting. Photo of how this looks: Update November 27th 2012: I re-installed my laptop a couple of weeks ago, which seemed to have solved the problem, but sadly, it still persists.

    Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >