Search Results

Search found 1611 results on 65 pages for 'technique'.

Page 58/65 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• How to restore your production database without needing additional storage

  - by David Atkinson

  Production databases can get very large. This in itself is to be expected, but when a copy of the database is needed the database must be restored, requiring additional and costly storage.  For example, if you want to give each developer a full copy of your production server, you'll need n times the storage cost for your n-developer team. The same is true for any test databases that are created during the course of your project lifecycle. If you've read my previous blog posts, you'll be aware that I've been focusing on the database continuous integration theme. In my CI setup I create a "production"-equivalent database directly from its source control representation, and use this to test my upgrade scripts. Despite this being a perfectly valid and practical thing to do as part of a CI setup, it's not the exact equivalent to running the upgrade script on a copy of the actual production database. So why shouldn't I instead simply restore the most recent production backup as part of my CI process? There are two reasons why this would be impractical. 1. My CI environment isn't an exact copy of my production environment. Indeed, this would be the case in a perfect world, and it is strongly recommended as a good practice if you follow Jez Humble and David Farley's "Continuous Delivery" teachings, but in practical terms this might not always be possible, especially where storage is concerned. It may just not be possible to restore a huge production database on the environment you've been allotted. 2. It's not just about the storage requirements, it's also the time it takes to do the restore. The whole point of continuous integration is that you are alerted as early as possible whether the build (yes, the database upgrade script counts!) is broken. If I have to run an hour-long restore each time I commit a change to source control I'm just not going to get the feedback quickly enough to react. So what's the solution? Red Gate has a technology, SQL Virtual Restore, that is able to restore a database without using up additional storage. Although this sounds too good to be true, the explanation is quite simple (although I'm sure the technical implementation details under the hood are quite complex!) Instead of restoring the backup in the conventional sense, SQL Virtual Restore will effectively mount the backup using its HyperBac technology. It creates a data and log file, .vmdf, and .vldf, that becomes the delta between the .bak file and the virtual database. This means that both read and write operations are permitted on a virtual database as from SQL Server's point of view it is no different from a conventional database. Instead of doubling the storage requirements upon a restore, there is no 'duplicate' storage requirements, other than the trivially small virtual log and data files (see illustration below). The benefit is magnified the more databases you mount to the same backup file. This technique could be used to provide a large development team a full development instance of a large production database. It is also incredibly easy to set up. Once SQL Virtual Restore is installed, you simply run a conventional RESTORE command to create the virtual database. This is what I have running as part of a nightly "release test" process triggered by my CI tool. RESTORE DATABASE WidgetProduction_virtual FROM DISK=N'C:\WidgetWF\ProdBackup\WidgetProduction.bak' WITH MOVE N'WidgetProduction' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_WidgetProduction_Virtual.vmdf', MOVE N'WidgetProduction_log' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_log_WidgetProduction_Virtual.vldf', NORECOVERY, STATS=1, REPLACE GO RESTORE DATABASE mydatabase WITH RECOVERY   Note the only change from what you would do normally is the naming of the .vmdf and .vldf files. SQL Virtual Restore intercepts this by monitoring the extension and applies its magic, ensuring the 'virtual' restore happens rather than the conventional storage-heavy restore. My automated release test then applies the upgrade scripts to the virtual production database and runs some validation tests, giving me confidence that were I to run this on production for real, all would go smoothly. For illustration, here is my 8Gb production database: And its corresponding backup file: Here are the .vldf and .vmdf files, which represent the only additional used storage for the new database following the virtual restore.   The beauty of this product is its simplicity. Once it is installed, the interaction with the backup and virtual database is exactly the same as before, as the clever stuff is being done at a lower level. SQL Virtual Restore can be downloaded as a fully functional 14-day trial. Technorati Tags: SQL Server

  Read the article

• Recover that Photo, Picture or File You Deleted Accidentally

  - by The Geek

  Have you ever accidentally deleted a photo on your camera, computer, USB drive, or anywhere else? What you might not know is that you can usually restore those pictures—even from your camera’s memory stick. Windows tries to prevent you from making a big mistake by providing the Recycle Bin, where deleted files hang around for a while—but unfortunately it doesn’t work for external USB drives, USB flash drives, memory sticks, or mapped drives. The great news is that this technique also works if you accidentally deleted the photo… from the camera itself. That’s what happened to me, and prompted writing this article. Restore that File or Photo using Recuva The first piece of software that you’ll want to try is called Recuva, and it’s extremely easy to use—just make sure when you are installing it, that you don’t accidentally install that stupid Yahoo! toolbar that nobody wants. Now that you’ve installed the software, and avoided an awful toolbar installation, launch the Recuva wizard and let’s start through the process of recovering those pictures you shouldn’t have deleted. The first step on the wizard page will let you tell Recuva to only search for a specific type of file, which can save a lot of time while searching, and make it easier to find what you are looking for. Next you’ll need to specify where the file was, which will obviously be up to wherever you deleted it from. Since I deleted mine from my camera’s SD card, that’s where I’m looking for it. The next page will ask you whether you want to do a Deep Scan. My recommendation is to not select this for the first scan, because usually the quick scan can find it. You can always go back and run a deep scan a second time. And now, you’ll see all of the pictures deleted from your drive, memory stick, SD card, or wherever you searched. Looks like what happened in Vegas didn’t stay in Vegas after all… If there are a really large number of results, and you know exactly when the file was created or modified, you can switch to the advanced view, where you can sort by the last modified time. This can help speed up the process quite a bit, so you don’t have to look through quite as many files. At this point, you can right-click on any filename, and choose to Recover it, and then save the files elsewhere on your drive. Awesome! Restore that File or Photo using DiskDigger If you don’t have any luck with Recuva, you can always try out DiskDigger, another excellent piece of software. I’ve tested both of these applications very thoroughly, and found that neither of them will always find the same files, so it’s best to have both of them in your toolkit. Note that DiskDigger doesn’t require installation, making it a really great tool to throw on your PC repair Flash drive. Start off by choosing the drive you want to recover from…   Now you can choose whether to do a deep scan, or a really deep scan. Just like with Recuva, you’ll probably want to select the first one first. I’ve also had much better luck with the regular scan, rather than the “dig deeper” one. If you do choose the “dig deeper” one, you’ll be able to select exactly which types of files you are looking for, though again, you should use the regular scan first. Once you’ve come up with the results, you can click on the items on the left-hand side, and see a preview on the right.  You can select one or more files, and choose to restore them. It’s pretty simple! Download DiskDigger from dmitrybrant.com Download Recuva from piriform.com Good luck recovering your deleted files! And keep in mind, DiskDigger is a totally free donationware software from a single, helpful guy… so if his software helps you recover a photo you never thought you’d see again, you might want to think about throwing him a dollar or two. Similar Articles Productive Geek Tips Stupid Geek Tricks: Undo an Accidental Move or Delete With a Keyboard ShortcutRestore Accidentally Deleted Files with RecuvaCustomize Your Welcome Picture Choices in Windows VistaAutomatically Resize Picture Attachments in Outlook 2007Resize Your Photos with Easy Thumbnails TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

  Read the article

• Editing sqlcmdvariable nodes in SSDT Publish Profile files using msbuild

  - by jamiet

  Publish profile files are a new feature of SSDT database projects that enable you to package up all environment-specific properties into a single file for use at publish time; I have written about them before at Publish Profile Files in SQL Server Data Tools (SSDT) and if it wasn’t obvious from that blog post, I’m a big fan! As I have used Publish Profile files more and more I have realised that there may be times when you need to edit those Publish profile files during your build process, you may think of such an operation as a kind of pre-processor step. In my case I have a sqlcmd variable called DeployTag, it holds a value representing the current build number that later gets inserted into a table using a Post-Deployment script (that’s a technique that I wrote about in Implementing SQL Server solutions using Visual Studio 2010 Database Projects – a compendium of project experiences – search for “Putting a build number into the DB”). Here are the contents of my Publish Profile file (simplified for demo purposes) : Notice that DeployTag defaults to “UNKNOWN”. On my current project we are using msbuild scripts to control what gets built and what I want to do is take the build number from our build engine and edit the Publish profile files accordingly. Here is the pertinent portion of the the msbuild script I came up with to do that:   <ItemGroup>     <Namespaces Include="myns">       <Prefix>myns</Prefix>       <Uri>http://schemas.microsoft.com/developer/msbuild/2003</Uri>     </Namespaces>   </ItemGroup>   <Target Name="UpdateBuildNumber">     <ItemGroup>       <SSDTPublishFiles Include="$(DESTINATION)\**\$(CONFIGURATION)\**\*.publish.xml" />     </ItemGroup>     <MSBuild.ExtensionPack.Xml.XmlFile Condition="%(SSDTPublishFiles.Identity) != ''"                                        TaskAction="UpdateElement"                                        File="%(SSDTPublishFiles.Identity)"                                        Namespaces="@(Namespaces)"                                         XPath="//myns:SqlCmdVariable[@Include='DeployTag']/myns:Value"                                         InnerText="$(BuildNumber)"/>   </Target> The important bits here are the definition of the namespace http://schemas.microsoft.com/developer/msbuild/2003: and the XPath expression //myns:SqlCmdVariable[@Include='DeployTag']/myns:Value: Some extra info: I use a fantastic tool called XMLPad to discover/test XPath expressions, read more at XMLPad – a new tool in my developer utility belt MSBuild.ExtensionPack.Xml.XmlFile is a msbuild task used to edit XML files and is available from Mike Fourie’s MSBuild Extension Pack I’m using a property called $(BuildNumber) to hold the value to substitute into the file and also $(DESTINATION)\**\$(CONFIGURATION)\**\*.publish.xml to define an ItemGroup all of my Publish Profile files. Populating those properties is basic msbuild stuff and is therefore outside the scope of this blog post however if you want to learn more check out MSBuild properties & How To: Use Wildcards to Build All Files in a Directory. Hope this is useful! @Jamiet

  Read the article

• concurrency::accelerator

  - by Daniel Moth

  Overview An accelerator represents a "target" on which C++ AMP code can execute and where data can reside. Typically (but not necessarily) an accelerator is a GPU device. Accelerators are represented in C++ AMP as objects of the accelerator class. For many scenarios, you do not need to obtain an accelerator object, since the runtime has a notion of a default accelerator, which is what it thinks is the best one in the system. Examples where you need to deal with accelerator objects are if you need to pick your own accelerator (based on your specific criteria), or if you need to use more than one accelerators from your app. Construction and operator usage You can query and obtain a std::vector of all the accelerators on your system, which the runtime discovers on startup. Beyond enumerating accelerators, you can also create one directly by passing to the constructor a system-wide unique path to a device if you know it (i.e. the “Device Instance Path” property for the device in Device Manager), e.g. accelerator acc(L"PCI\\VEN_1002&DEV_6898&SUBSYS_0B001002etc"); There are some predefined strings (for predefined accelerators) that you can pass to the accelerator constructor (and there are corresponding constants for those on the accelerator class itself, so you don’t have to hardcode them every time). Examples are the following: accelerator::default_accelerator represents the default accelerator that the C++ AMP runtime picks for you if you don’t pick one (the heuristics of how it picks one will be covered in a future post). Example: accelerator acc; accelerator::direct3d_ref represents the reference rasterizer emulator that simulates a direct3d device on the CPU (in a very slow manner). This emulator is available on systems with Visual Studio installed and is useful for debugging. More on debugging in general in future posts. Example: accelerator acc(accelerator::direct3d_ref); accelerator::direct3d_warp represents a target that I will cover in future blog posts. Example: accelerator acc(accelerator::direct3d_warp); accelerator::cpu_accelerator represents the CPU. In this first release the only use of this accelerator is for using the staging arrays technique that I'll cover separately. Example: accelerator acc(accelerator::cpu_accelerator); You can also create an accelerator by shallow copying another accelerator instance (via the corresponding constructor) or simply assigning it to another accelerator instance (via the operator overloading of =). Speaking of operator overloading, you can also compare (for equality and inequality) two accelerator objects between them to determine if they refer to the same underlying device. Querying accelerator characteristics Given an accelerator object, you can access its description, version, device path, size of dedicated memory in KB, whether it is some kind of emulator, whether it has a display attached, whether it supports double precision, and whether it was created with the debugging layer enabled for extensive error reporting. Below is example code that accesses some of the properties; in your real code you'd probably be checking one or more of them in order to pick an accelerator (or check that the default one is good enough for your specific workload): void inspect_accelerator(concurrency::accelerator acc) { std::wcout << "New accelerator: " << acc.description << std::endl; std::wcout << "is_debug = " << acc.is_debug << std::endl; std::wcout << "is_emulated = " << acc.is_emulated << std::endl; std::wcout << "dedicated_memory = " << acc.dedicated_memory << std::endl; std::wcout << "device_path = " << acc.device_path << std::endl; std::wcout << "has_display = " << acc.has_display << std::endl; std::wcout << "version = " << (acc.version >> 16) << '.' << (acc.version & 0xFFFF) << std::endl; } accelerator_view In my next blog post I'll cover a related class: accelerator_view. Suffice to say here that each accelerator may have from 1..n related accelerator_view objects. You can get the accelerator_view from an accelerator via the default_view property, or create new ones by invoking the create_view method that creates an accelerator_view object for you (by also accepting a queuing_mode enum value of deferred or immediate that we'll also explore in the next blog post). Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Towards an F# .NET Reflector add-in

  - by CliveT

  When I had the opportunity to spent some time during Red Gate's recent "down tools" week on a project of my choice, the obvious project was an F# add-in for Reflector . To be honest, this was a bit of a misnomer as the amount of time in the designated week for coding was really less than three days, so it was always unlikely that very much progress would be made in such a small amount of time (and that certainly proved to be the case), but I did learn some things from the experiment. Like lots of problems, one useful technique is to take examples, get them to work, and then generalise to get something that works across the board. Unfortunately, I didn't have enough time to do the last stage. The obvious first step is to take a few function definitions, starting with the obvious hello world, moving on to a non-recursive function and finishing with the ubiquitous recursive Fibonacci function. let rec printMessage message  =     printfn  message let foo x  =    (x + 1) let rec fib x  =     if (x >= 2) then (fib (x - 1) + fib (x - 2)) else 1 The major problem in decompiling these simple functions is that Reflector has an in-memory object model that is designed to support object-oriented languages. In particular it has a return statement that allows function bodies to finish early. I used some of the in-built functionality to take the IL and produce an in-memory object model for the language, but then needed to write a transformer to push the return statements to the top of the tree to make it easy to render the code into a functional language. This tree transform works in some scenarios, but not in others where we simply regenerate code that looks more like CPS style. The next thing to get working was library level bindings of values where these values are calculated at runtime. let x = [1 ; 2 ; 3 ; 4] let y = List.map  (fun x -> foo x) x The way that this is translated into a set of classes for the underlying platform means that the code needs to follow references around, from the property exposing the calculated value to the class in which the code for generating the value is embedded. One of the strongest selling points of functional languages is the algebraic datatypes, which allow definitions via standard mathematical-style inductive definitions across the union cases. type Foo =     | Something of int     | Nothing type 'a Foo2 =     | Something2 of 'a     | Nothing2 Such a definition is compiled into a number of classes for the cases of the union, which all inherit from a class representing the type itself. It wasn't too hard to get such a de-compilation happening in the cases I tried. What did I learn from this? Firstly, that there are various bits of functionality inside Reflector that it would be useful for us to allow add-in writers to access. In particular, there are various implementations of the Visitor pattern which implement algorithms such as calculating the number of references for particular variables, and which perform various substitutions which could be more generally useful to add-in writers. I hope to do something about this at some point in the future. Secondly, when you transform a functional language into something that runs on top of an object-based platform, you lose some fidelity in the representation. The F# compiler leaves attributes in place so that tools can tell which classes represent classes from the source program and which are there for purposes of the implementation, allowing the decompiler to regenerate these constructs again. However, decompilation technology is a long way from being able to take unannotated IL and transform it into a program in a different language. For a simple function definition, like Fibonacci, I could write a simple static function and have it come out in F# as the same function, but it would be practically impossible to take a mass of class definitions and have a decompiler translate it automatically into an F# algebraic data type. What have we got out of this? Some data on the feasibility of implementing an F# decompiler inside Reflector, though it's hard at the moment to say how long this would take to do. The work we did is included the 6.5 EAP for Reflector that you can get from the EAP forum. All things considered though, it was a useful way to gain more familiarity with the process of writing an add-in and understand difficulties other add-in authors might experience. If you'd like to check out a video of Down Tools Week, click here.

  Read the article

• Demystified - BI in SharePoint 2010

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). Frequently, my clients ask me if there is a good guide on deciphering the seemingly daunting choice of products from Microsoft when it comes to business intelligence offerings in a SharePoint 2010 world. These are all described in detail in my book, but here is a one (well maybe two) page executive overview. Microsoft Excel: Yes, Microsoft Excel! Your favorite and most commonly used in the world database. No it isn’t a database in technical pure definitions, but this is the most commonly used ‘database’ in the world. You will find many business users craft up very compelling excel sheets with tonnes of logic inside them. Good for: Quick Ad-Hoc reports. Excel 64 bit allows the possibility of very large datasheets (Also see 32 bit vs 64 bit Office, and PowerPivot Add-In below). Audience: End business user can build such solutions. Related technologies: PowerPivot, Excel Services Microsoft Excel with PowerPivot Add-In: The powerpivot add-in is an extension to Excel that adds support for large-scale data. Think of this as Excel with the ability to deal with very large amounts of data. It has an in-memory data store as an option for Analysis services. Good for: Ad-hoc reporting and logic with very large amounts of data. Audience: End business user can build such solutions. Related technologies: Excel, and Excel Services Excel Services: Excel Services is a Microsoft SharePoint Server 2010 shared service that brings the power of Excel to SharePoint Server by providing server-side calculation and browser-based rendering of Excel workbooks. Thus, excel sheets can be created by end users, and published to SharePoint server – which are then rendered right through the browser in read-only or parameterized-read-only modes. They can also be accessed by other software via SOAP or REST based APIs. Good for: Sharing excel sheets with a larger number of people, while maintaining control/version control etc. Sharing logic embedded in excel sheets with other software across the organization via REST/SOAP interfaces Audience: End business users can build such solutions once your tech staff has setup excel services on a SharePoint server instance. Programmers can write software consuming functionality/complex formulae contained in your sheets. Related technologies: PerformancePoint Services, Excel, and PowerPivot. Visio Services: Visio Services is a shared service on the Microsoft SharePoint Server 2010 platform that allows users to share and view Visio diagrams that may or may not have data connected to them. Connected data can update these diagrams allowing a visual/graphical view into the data. The diagrams are viewable through the browser. They are rendered in silverlight, but will automatically down-convert to .png formats. Good for: Showing data as diagrams, live updating. Comes with a developer story. Audience: End business users can build such solutions once your tech staff has setup visio services on a SharePoint server instance. Developers can enhance the visualizations Related Technologies: Visio Services can be used to render workflow visualizations in SP2010 Reporting Services: SQL Server reporting services can integrate with SharePoint, allowing you to store reports and data sources in SharePoint document libraries, and render these reports and associated functionality such as subscriptions through a SharePoint site. In SharePoint 2010, you can also write reports against SharePoint lists (access services uses this technique). Good for: Showing complex reports running in a industry standard data store, such as SQL server. Audience: This is definitely developer land. Don’t expect end users to craft up reports, unless a report model has previously been published. Related Technologies: PerformancePoint Services PerformancePoint Services: PerformancePoint Services in SharePoint 2010 is now fully integrated with SharePoint, and comes with features that can either be used in the BI center site definition, or on their own as activated features in existing site collections. PerformancePoint services allows you to build reports and dashboards that target a variety of back-end datasources including: SQL Server reporting services, SQL Server analysis services, SharePoint lists, excel services, simple tables, etc. Using these you have the ability to create dashboards, scorecards/kpis, and simple reports. You can also create reports targeting hierarchical multidimensional data sources. The visual decomposition tree is a new report type that lets you quickly breakdown multi-dimensional data. Good for: Mostly everything :), except your wallet – it’s not free! But this is the most comprehensive offering. If you have SharePoint server, forget everything and go with performance point. Audience: Developers need to setup the back-end sources, manageability story. DBAs need to setup datawarehouses with cubes. Moderately sophisticated business users, or developers can craft up reports using dashboard designer which is a click-once App that deploys with PerformancePoint Related Technologies: Excel services, reporting services, etc.   Other relevant technologies to know about: Business Connectivity Services: Allows for consumption of external data in SharePoint as columns or external lists. This can be paired with one or more of the above BI offerings allowing insight into such data. Access Services: Allows the representation/publishing of an access database as a SharePoint 2010 site, leveraging many SharePoint features. Reporting services is used by Access services. Secure Store Service: The SP2010 Secure store service is a replacement for the SP2007 single sign on feature. This acts as a credential policeman providing credentials to various applications running with SharePoint. BCS, PerformancePoint Services, Excel Services, and many other apps use the SSS (Secure Store Service) for credential control. Comment on the article ....

  Read the article

• Forcing an External Activation with Service Broker

  - by Davide Mauri

  In these last days I’ve been working quite a lot with Service Broker, a technology I’m really happy to work with, since it can give a lot of satisfaction. The scale-out solution one can easily build is simply astonishing. I’m helping a company to build a very scalable and – yet almost inexpensive – invoicing system that has to be able to scale out using commodity hardware. To offload the work from the main server to satellite “compute nodes” (yes, I’ve borrowed this term from PDW) we’re using Service Broker and the External Activator application available in the SQL Server Feature Pack. For those who are not used to work with SSB, the External Activation is a feature that allows you to intercept the arrival of a message in a queue right from your application code. http://msdn.microsoft.com/en-us/library/ms171617.aspx (Look for “Event-Based Activation”) In order to make life even more easier, Microsoft released the External Activation application that saves you even from writing even this code. http://blogs.msdn.com/b/sql_service_broker/archive/tags/external+activator/ The External Activator application can be configured to execute your own application so that each time a message – an invoice in my case – arrives in the target queue, the invoking application is executed and the invoice is calculated. The very nice feature of External Activator is that it can automatically execute as many configured application in order to process as many messages as your system can handle.  This also a lot of create a scale-out solution, leaving to the developer only a fraction of the problems that usually came with asynchronous programming. Developers are also shielded from Service Broker since everything can be encapsulated in Stored Procedures, so that – for them – developing such scale-out asynchronous solution is not much more complex than just executing a bunch of Stored Procedures. Now, if everything works correctly, you don’t have to bother of anything else. You put messages in the queue and your application, invoked by the External Activator, process them. But what happen if for some reason your application fails to process the messages. For examples, it crashes? The message is safe in the queue so you just need to process it again. But your application is invoked by the External Activator application, so now the question is, how do you wake up that app? Service Broker will engage the activation process only if certain conditions are met: http://msdn.microsoft.com/en-us/library/ms171601.aspx But how we can invoke the activation process manually, without having to wait for another message to arrive (the arrival of a new message is a condition that can fire the activation process)? The “trick” is to do manually with the activation process does: sending a system message to a queue in charge of handling External Activation messages: declare @conversationHandle uniqueidentifier; declare @n xml = N' <EVENT_INSTANCE>   <EventType>QUEUE_ACTIVATION</EventType>   <PostTime>' + CONVERT(CHAR(24),GETDATE(),126) + '</PostTime>   <SPID>' + CAST(@@SPID AS VARCHAR(9)) + '</SPID>   <ServerName>[your_server_name]</ServerName>   <LoginName>[your_login_name]</LoginName>   <UserName>[your_user_name]</UserName>   <DatabaseName>[your_database_name]</DatabaseName>   <SchemaName>[your_queue_schema_name]</SchemaName>   <ObjectName>[your_queue_name]</ObjectName>   <ObjectType>QUEUE</ObjectType> </EVENT_INSTANCE>' begin dialog conversation     @conversationHandle from service        [<your_initiator_service_name>] to service          '<your_event_notification_service>' on contract         [http://schemas.microsoft.com/SQL/Notifications/PostEventNotification] with     encryption = off,     lifetime = 6000 ; send on conversation     @conversationHandle message type     [http://schemas.microsoft.com/SQL/Notifications/EventNotification] (@n) ;     end conversation @conversationHandle; That’s it! Put the code in a Stored Procedure and you can add to your application a button that says “Force Queue Processing” (or something similar) in order to start the activation process whenever you need it (which should not occur too frequently but it may happen). PS I know that the “fire-and-forget” (ending the conversation without waiting for an answer) technique is not a best practice, but in this case I don’t see how it can hurts so I decided to stay very close to the KISS principle []

  Read the article

• How to restore your production database without needing additional storage

  - by David Atkinson

  Production databases can get very large. This in itself is to be expected, but when a copy of the database is needed the database must be restored, requiring additional and costly storage.  For example, if you want to give each developer a full copy of your production server, you'll need n times the storage cost for your n-developer team. The same is true for any test databases that are created during the course of your project lifecycle. If you've read my previous blog posts, you'll be aware that I've been focusing on the database continuous integration theme. In my CI setup I create a "production"-equivalent database directly from its source control representation, and use this to test my upgrade scripts. Despite this being a perfectly valid and practical thing to do as part of a CI setup, it's not the exact equivalent to running the upgrade script on a copy of the actual production database. So why shouldn't I instead simply restore the most recent production backup as part of my CI process? There are two reasons why this would be impractical. 1. My CI environment isn't an exact copy of my production environment. Indeed, this would be the case in a perfect world, and it is strongly recommended as a good practice if you follow Jez Humble and David Farley's "Continuous Delivery" teachings, but in practical terms this might not always be possible, especially where storage is concerned. It may just not be possible to restore a huge production database on the environment you've been allotted. 2. It's not just about the storage requirements, it's also the time it takes to do the restore. The whole point of continuous integration is that you are alerted as early as possible whether the build (yes, the database upgrade script counts!) is broken. If I have to run an hour-long restore each time I commit a change to source control I'm just not going to get the feedback quickly enough to react. So what's the solution? Red Gate has a technology, SQL Virtual Restore, that is able to restore a database without using up additional storage. Although this sounds too good to be true, the explanation is quite simple (although I'm sure the technical implementation details under the hood are quite complex!) Instead of restoring the backup in the conventional sense, SQL Virtual Restore will effectively mount the backup using its HyperBac technology. It creates a data and log file, .vmdf, and .vldf, that becomes the delta between the .bak file and the virtual database. This means that both read and write operations are permitted on a virtual database as from SQL Server's point of view it is no different from a conventional database. Instead of doubling the storage requirements upon a restore, there is no 'duplicate' storage requirements, other than the trivially small virtual log and data files (see illustration below). The benefit is magnified the more databases you mount to the same backup file. This technique could be used to provide a large development team a full development instance of a large production database. It is also incredibly easy to set up. Once SQL Virtual Restore is installed, you simply run a conventional RESTORE command to create the virtual database. This is what I have running as part of a nightly "release test" process triggered by my CI tool. RESTORE DATABASE WidgetProduction_virtual FROM DISK=N'C:\WidgetWF\ProdBackup\WidgetProduction.bak' WITH MOVE N'WidgetProduction' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_WidgetProduction_Virtual.vmdf', MOVE N'WidgetProduction_log' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_log_WidgetProduction_Virtual.vldf', NORECOVERY, STATS=1, REPLACE GO RESTORE DATABASE mydatabase WITH RECOVERY   Note the only change from what you would do normally is the naming of the .vmdf and .vldf files. SQL Virtual Restore intercepts this by monitoring the extension and applies its magic, ensuring the 'virtual' restore happens rather than the conventional storage-heavy restore. My automated release test then applies the upgrade scripts to the virtual production database and runs some validation tests, giving me confidence that were I to run this on production for real, all would go smoothly. For illustration, here is my 8Gb production database: And its corresponding backup file: Here are the .vldf and .vmdf files, which represent the only additional used storage for the new database following the virtual restore.   The beauty of this product is its simplicity. Once it is installed, the interaction with the backup and virtual database is exactly the same as before, as the clever stuff is being done at a lower level. SQL Virtual Restore can be downloaded as a fully functional 14-day trial. Technorati Tags: SQL Server

  Read the article

• Using SQL Source Control with Fortress or Vault &ndash; Part 1

  - by AjarnMark

  I am fanatical when it comes to managing the source code for my company.  Everything that we build (in source form) gets put into our source control management system.  And I’m not just talking about the UI and middle-tier code written in C# and ASP.NET, but also the back-end database stuff, which at times has been a pain.  We even script out our Scheduled Jobs and keep a copy of those under source control. The UI and middle-tier stuff has long been easy to manage as we mostly use Visual Studio which has integration with source control systems built in.  But the SQL code has been a little harder to deal with.  I have been doing this for many years, well before Microsoft came up with Data Dude, so I had already established a methodology that, while not as smooth as VS, nonetheless let me keep things well controlled, and allowed doing my database development in my tool of choice, Query Analyzer in days gone by, and now SQL Server Management Studio.  It just makes sense to me that if I’m going to do database development, let’s use the database tool set.  (Although, I have to admit I was pretty impressed with the demo of Juneau that Don Box did at the PASS Summit this year.)  So as I was saying, I had developed a methodology that worked well for us (and I’ll probably outline in a future post) but it could use some improvement. When Solutions and Projects were first introduced in SQL Management Studio, I thought we were finally going to get our same experience that we have in Visual Studio.  Well, let’s say I was underwhelmed by Version 1 in SQL 2005, and apparently so were enough other people that by the time SQL 2008 came out, Microsoft decided that Solutions and Projects would be deprecated and completely removed from a future version.  So much for that idea. Then I came across SQL Source Control from Red-Gate.  I have used several tools from Red-Gate in the past, including my favorites SQL Compare, SQL Prompt, and SQL Refactor.  SQL Prompt is worth its weight in gold, and the others are great, too.  Earlier this year, we upgraded from our earlier product bundles to the new Developer Bundle, and in the process added SQL Source Control to our collection.  I thought this might really be the golden ticket I was looking for.  But my hopes were quickly dashed when I discovered that it only integrated with Microsoft Team Foundation Server and Subversion as the source code repositories.  We have been using SourceGear’s Vault and Fortress products for years, and I wholeheartedly endorse them.  So I was out of luck for the time being, although there were a number of people voting for Vault/Fortress support on their feedback forum (as did I) so I had hope that maybe next year I could look at it again. But just a couple of weeks ago, I was pleasantly surprised to receive notice in my email that Red-Gate had an Early Access version of SQL Source Control that worked with Vault and Fortress, so I quickly downloaded it and have been putting it through its paces.  So far, I really like what I see, and I have been quite impressed with Red-Gate’s responsiveness when I have contacted them with any issues or concerns that I have had.  I have had several communications with Gyorgy Pocsi at Red-Gate and he has been immensely helpful and responsive. I must say that development with SQL Source Control is very different from what I have been used to.  This post is getting long enough, so I’ll save some of the details for a separate write-up, but the short story is that in my regular mode, it’s all about the script files.  Script files are King and you dare not make a change to the database other than by way of a script file, or you are in deep trouble.  With SQL Source Control, you make your changes to your development database however you like.  I still prefer writing most of my changes in T-SQL, but you can also use any of the GUI functionality of SSMS to make your changes, and SQL Source Control “manages” the script for you.  Basically, when you first link your database to source control, the tool generates scripts for every primary object (tables and their indexes are together in one script, not broken out into separate scripts like DB Projects do) and those scripts are checked into your source control.  So, if you needed to, you could still do a GET from your source control repository and build the database from scratch.  But for the day-to-day work, SQL Source Control uses the same technique as SQL Compare to determine what changes have been made to your development database and how to represent those in your repository scripts.  I think that once I retrain myself to just work in the database and quit worrying about having to find and open the right script file, that this will actually make us more efficient. And for deployment purposes, SQL Source Control integrates with the full SQL Compare utility to produce a synchronization script (or do a live sync).  This is similar in concept to Microsoft’s DACPAC, if you’re familiar with that. If you are not currently keeping your database development efforts under source control, definitely examine this tool.  If you already have a methodology that is working for you, then I still think this is worth a review and comparison to your current approach.  You may find it more efficient.  But remember that the version which integrates with Vault/Fortress is still in pre-release mode, so treat it with a little caution.  I have found it to be fairly stable, but there was one bug that I found which had inconvenient side-effects and could have really been frustrating if I had been running this on my normal active development machine.  However, I can verify that that bug has been fixed in a more recent build version (did I mention Red-Gate’s responsiveness?).

  Read the article

• Kendo UI Mobile with Knockout for Master-Detail Views

  - by Steve Michelotti

  Lately I’ve been playing with Kendo UI Mobile to build iPhone apps. It’s similar to jQuery Mobile in that they are both HTML5/JavaScript based frameworks for buildings mobile apps. The primary thing that drew me to investigate Kendo UI was its innate ability to adaptively render a native looking app based on detecting the device it’s currently running on. In other words, it will render to look like a native iPhone app if it’s running on an iPhone and it will render to look like a native Droid app if it’s running on a Droid. This is in contrast to jQuery Mobile which looks the same on all devices and, therefore, it can never quite look native for whatever device it’s running on. My first impressions of Kendo UI were great. Using HTML5 data-* attributes to define “roles” for UI elements is easy, the rendering looked great, and the basic navigation was simple and intuitive. However, I ran into major confusion when trying to figure out how to “correctly” build master-detail views. Since I was already very family with KnockoutJS, I set out to use that framework in conjunction with Kendo UI Mobile to build the following simple scenario: I wanted to have a simple “Task Manager” application where my first screen just showed a list of tasks like this:   Then clicking on a specific task would navigate to a detail screen that would show all details of the specific task that was selected:   Basic navigation between views in Kendo UI is simple. The href of an <a> tag just needs to specify a hash tag followed by the ID of the view to navigate to as shown in this jsFiddle (notice the href of the <a> tag matches the id of the second view):   Direct link to jsFiddle: here. That is all well and good but the problem I encountered was: how to pass data between the views? Specifically, I need the detail view to display all the details of whichever task was selected. If I was doing this with my typical technique with KnockoutJS, I know exactly what I would do. First I would create a view model that had my collection of tasks and a property for the currently selected task like this: 1: function ViewModel() { 2: var self = this; 3: self.tasks = ko.observableArray(data); 4: self.selectedTask = ko.observable(null); 5: } Then I would bind my list of tasks to the unordered list - I would attach a “click” handler to each item (each <li> in the unordered list) so that it would select the “selectedTask” for the view model. The problem I found is this approach simply wouldn’t work for Kendo UI Mobile. It completely ignored the click handlers that I was trying to attach to the <a> tags – it just wanted to look at the href (at least that’s what I observed). But if I can’t intercept this, then *how* can I pass data or any context to the next view? The only thing I was able to find in the Kendo documentation is that you can pass query string arguments on the view name you’re specifying in the href. This enabled me to do the following: Specify the task ID in each href – something like this: <a href=”#taskDetail?id=3></a> Attach an “init method” (via the “data-show” attribute on the details view) that runs whenever the view is activated Inside this “init method”, grab the task ID passed from the query string to look up the item from my view model’s list of tasks in order to set the selected task I was able to get all that working with about 20 lines of JavaScript as shown in this jsFiddle. If you click on the Results tab, you can navigate between views and see the the detail screen is correctly binding to the selected item:   Direct link to jsFiddle: here.   With all that being done, I was very happy to get it working with the behavior I wanted. However, I have no idea if that is the “correct” way to do it or if there is a “better” way to do it. I know that Kendo UI comes with its own data binding framework but my preference is to be able to use (the well-documented) KnockoutJS since I’m already familiar with that framework rather than having to learn yet another new framework. While I think my solution above is probably “acceptable”, there are still a couple of things that bug me about it. First, it seems odd that I have to loop through my items to *find* my selected item based on the ID that was passed on the query string - normally, with Knockout I can just refer directly to my selected item from where it was used. Second, it didn’t feel exactly right that I had to rely on the “data-show” method of the details view to set my context – normally with Knockout, I could just attach a click handler to the <a> tag that was actually clicked by the user in order to set the “selected item.” I’m not sure if I’m being too picky. I know there are many people that have *way* more expertise in Kendo UI compared to me – I’d be curious to know if there are better ways to achieve the same results.

  Read the article

• 2D Selective Gaussian Blur

  - by Joshua Thomas

  I am attempting to use Gaussian blur on a 2D platform game, selectively blurring specific types of platforms with different amounts. I am currently just messing around with simple test code, trying to get it to work correctly. What I need to eventually do is create three separate render targets, leave one normal, blur one slightly, and blur the last heavily, then recombine on the screen. Where I am now is I have successfully drawn into a new render target and performed the gaussian blur on it, but when I draw it back to the screen everything is purple aside from the platforms I drew to the target. This is my .fx file: #define RADIUS 7 #define KERNEL_SIZE (RADIUS * 2 + 1) //----------------------------------------------------------------------------- // Globals. //----------------------------------------------------------------------------- float weights[KERNEL_SIZE]; float2 offsets[KERNEL_SIZE]; //----------------------------------------------------------------------------- // Textures. //----------------------------------------------------------------------------- texture colorMapTexture; sampler2D colorMap = sampler_state { Texture = <colorMapTexture>; MipFilter = Linear; MinFilter = Linear; MagFilter = Linear; }; //----------------------------------------------------------------------------- // Pixel Shaders. //----------------------------------------------------------------------------- float4 PS_GaussianBlur(float2 texCoord : TEXCOORD) : COLOR0 { float4 color = float4(0.0f, 0.0f, 0.0f, 0.0f); for (int i = 0; i < KERNEL_SIZE; ++i) color += tex2D(colorMap, texCoord + offsets[i]) * weights[i]; return color; } //----------------------------------------------------------------------------- // Techniques. //----------------------------------------------------------------------------- technique GaussianBlur { pass { PixelShader = compile ps_2_0 PS_GaussianBlur(); } } This is the code I'm using for the gaussian blur: public Texture2D PerformGaussianBlur(Texture2D srcTexture, RenderTarget2D renderTarget1, RenderTarget2D renderTarget2, SpriteBatch spriteBatch) { if (effect == null) throw new InvalidOperationException("GaussianBlur.fx effect not loaded."); Texture2D outputTexture = null; Rectangle srcRect = new Rectangle(0, 0, srcTexture.Width, srcTexture.Height); Rectangle destRect1 = new Rectangle(0, 0, renderTarget1.Width, renderTarget1.Height); Rectangle destRect2 = new Rectangle(0, 0, renderTarget2.Width, renderTarget2.Height); // Perform horizontal Gaussian blur. game.GraphicsDevice.SetRenderTarget(renderTarget1); effect.CurrentTechnique = effect.Techniques["GaussianBlur"]; effect.Parameters["weights"].SetValue(kernel); effect.Parameters["colorMapTexture"].SetValue(srcTexture); effect.Parameters["offsets"].SetValue(offsetsHoriz); spriteBatch.Begin(0, BlendState.Opaque, null, null, null, effect); spriteBatch.Draw(srcTexture, destRect1, Color.White); spriteBatch.End(); // Perform vertical Gaussian blur. game.GraphicsDevice.SetRenderTarget(renderTarget2); outputTexture = (Texture2D)renderTarget1; effect.Parameters["colorMapTexture"].SetValue(outputTexture); effect.Parameters["offsets"].SetValue(offsetsVert); spriteBatch.Begin(0, BlendState.Opaque, null, null, null, effect); spriteBatch.Draw(outputTexture, destRect2, Color.White); spriteBatch.End(); // Return the Gaussian blurred texture. game.GraphicsDevice.SetRenderTarget(null); outputTexture = (Texture2D)renderTarget2; return outputTexture; } And this is the draw method affected: public void Draw(SpriteBatch spriteBatch) { device.SetRenderTarget(maxBlur); spriteBatch.Begin(); foreach (Brick brick in blueBricks) brick.Draw(spriteBatch); spriteBatch.End(); blue = gBlur.PerformGaussianBlur((Texture2D) maxBlur, helperTarget, maxBlur, spriteBatch); spriteBatch.Begin(); device.SetRenderTarget(null); foreach (Brick brick in redBricks) brick.Draw(spriteBatch); foreach (Brick brick in greenBricks) brick.Draw(spriteBatch); spriteBatch.Draw(blue, new Rectangle(0, 0, blue.Width, blue.Height), Color.White); foreach (Brick brick in purpleBricks) brick.Draw(spriteBatch); spriteBatch.End(); } I'm sorry about the massive brick of text and images(or not....new user, I tried, it said no), but I wanted to get my problem across clearly as I have been searching for an answer to this for quite a while now. As a side note, I have seen the bloom sample. Very well commented, but overly complicated since it deals in 3D; I was unable to take what I needed to learn form it. Thanks for any and all help.

  Read the article

• How to build a Singleton-like dependency injector replacement (Php)

  - by Erparom

  I know out there are a lot of excelent containers, even frameworks almost entirely DI based with good strong IoC classes. However, this doesn't help me to "define" a new pattern. (This is Php code but understandable to anyone) Supose we have: //Declares the singleton class bookSingleton { private $author; private static $bookInstance; private static $isLoaned = FALSE; //The private constructor private function __constructor() { $this->author = "Onecrappy Writer Ofcheap Novels"; } //Sets the global isLoaned state and also gets self instance public static function loanBook() { if (self::$isLoaned === FALSE) { //Book already taken, so return false return FALSE; } else { //Ok, not loaned, lets instantiate (if needed and loan) if (!isset(self::$bookInstance)) { self::$bookInstance = new BookSingleton(); } self::$isLoaned = TRUE; } } //Return loaned state to false, so another book reader can take the book public function returnBook() { $self::$isLoaned = FALSE; } public function getAuthor() { return $this->author; } } Then we get the singelton consumtion class: //Consumes the Singleton class BookBorrower() { private $borrowedBook; private $haveBookState; public function __construct() { this->haveBookState = FALSE; } //Use the singelton-pattern behavior public function borrowBook() { $this->borrowedBook = BookSingleton::loanBook(); //Check if was successfully borrowed if (!this->borrowedBook) { $this->haveBookState = FALSE; } else { $this->haveBookState = TRUE; } } public function returnBook() { $this->borrowedBook->returnBook(); $this->haveBookState = FALSE; } public function getBook() { if ($this->haveBookState) { return "The book is loaned, the author is" . $this->borrowedbook->getAuthor(); } else { return "I don't have the book, perhaps someone else took it"; } } } At last, we got a client, to test the behavior function __autoload($class) { require_once $class . '.php'; } function write ($whatever,$breaks) { for($break = 0;$break<$breaks;$break++) { $whatever .= "\n"; } echo nl2br($whatever); } write("Begin Singleton test", 2); $borrowerJuan = new BookBorrower(); $borrowerPedro = new BookBorrower(); write("Juan asks for the book", 1); $borrowerJuan->borrowBook(); write("Book Borrowed? ", 1); write($borrowerJuan->getAuthorAndTitle(),2); write("Pedro asks for the book", 1); $borrowerPedro->borrowBook(); write("Book Borrowed? ", 1); write($borrowerPedro->getAuthorAndTitle(),2); write("Juan returns the book", 1); $borrowerJuan->returnBook(); write("Returned Book Juan? ", 1); write($borrowerJuan->getAuthorAndTitle(),2); write("Pedro asks again for the book", 1); $borrowerPedro->borrowBook(); write("Book Borrowed? ", 1); write($borrowerPedro->getAuthorAndTitle(),2); This will end up in the expected behavior: Begin Singleton test Juan asks for the book Book Borrowed? The book is loaned, the author is = Onecrappy Writer Ofcheap Novels Pedro asks for the book Book Borrowed? I don't have the book, perhaps someone else took it Juan returns the book Returned Book Juan? I don't have the book, perhaps someone else took it Pedro asks again for the book Book Borrowed? The book is loaned, the author is = Onecrappy Writer Ofcheap Novels So I want to make a pattern based on the DI technique able to do exactly the same, but without singleton pattern. As far as I'm aware, I KNOW I must inject the book inside "borrowBook" function instead of taking a static instance: public function borrowBook(BookNonSingleton $book) { if (isset($this->borrowedBook) || $book->isLoaned()) { $this->haveBook = FALSE; return FALSE; } else { $this->borrowedBook = $book; $this->haveBook = TRUE; return TRUE; } } And at the client, just handle the book: $borrowerJuan = new BookBorrower(); $borrowerJuan-borrowBook(new NonSingletonBook()); Etc... and so far so good, BUT... Im taking the responsability of "single instance" to the borrower, instead of keeping that responsability inside the NonSingletonBook, that since it has not anymore a private constructor, can be instantiated as many times... making instances on each call. So, What does my NonSingletonBook class MUST be in order to never allow borrowers to have this same book twice? (aka) keep the single instance. Because the dependency injector part of the code (borrower) does not solve me this AT ALL. Is it needed the container with an "asShared" method builder with static behavior? No way to encapsulate this functionallity into the Book itself? "Hey Im a book and I shouldn't be instantiated more than once, I'm unique"

  Read the article

• Availability Best Practices on Oracle VM Server for SPARC

  - by jsavit

  This is the first of a series of blog posts on configuring Oracle VM Server for SPARC (also called Logical Domains) for availability. This series will show how to how to plan for availability, improve serviceability, avoid single points of failure, and provide resiliency against hardware and software failures. Availability is a broad topic that has filled entire books, so these posts will focus on aspects specifically related to Oracle VM Server for SPARC. The goal is to improve Reliability, Availability and Serviceability (RAS): An article defining RAS can be found here. Oracle VM Server for SPARC Principles for Availability Let's state some guiding principles for availability that apply to Oracle VM Server for SPARC: Avoid Single Points Of Failure (SPOFs). Systems should be configured so a component failure does not result in a loss of application service. The general method to avoid SPOFs is to provide redundancy so service can continue without interruption if a component fails. For a critical application there may be multiple levels of redundancy so multiple failures can be tolerated. Oracle VM Server for SPARC makes it possible to configure systems that avoid SPOFs. Configure for availability at a level of resource and effort consistent with business needs. Effort and resource should be consistent with business requirements. Production has different availability requirements than test/development, so it's worth expending resources to provide higher availability. Even within the category of production there may be different levels of criticality, outage tolerances, recovery and repair time requirements. Keep in mind that a simple design may be more understandable and effective than a complex design that attempts to "do everything". Design for availability at the appropriate tier or level of the platform stack. Availability can be provided in the application, in the database, or in the virtualization, hardware and network layers they depend on - or using a combination of all of them. It may not be necessary to engineer resilient virtualization for stateless web applications applications where availability is provided by a network load balancer, or for enterprise applications like Oracle Real Application Clusters (RAC) and WebLogic that provide their own resiliency. It's (often) the same architecture whether virtual or not: For example, providing resiliency against a lost device path or failing disk media is done for the same reasons and may use the same design whether in a domain or not. It's (often) the same technique whether using domains or not: Many configuration steps are the same. For example, configuring IPMP or creating a redundant ZFS pool is pretty much the same within the guest whether you're in a guest domain or not. There are configuration steps and choices for provisioning the guest with the virtual network and disk devices, which we will discuss. Sometimes it is different using domains: There are new resources to configure. Most notable is the use of alternate service domains, which provides resiliency in case of a domain failure, and also permits improved serviceability via "rolling upgrades". This is an important differentiator between Oracle VM Server for SPARC and traditional virtual machine environments where all virtual I/O is provided by a monolithic infrastructure that itself is a SPOF. Alternate service domains are widely used to provide resiliency in production logical domains environments. Some things are done via logical domains commands, and some are done in the guest: For example, with Oracle VM Server for SPARC we provide multiple network connections to the guest, and then configure network resiliency in the guest via IP Multi Pathing (IPMP) - essentially the same as for non-virtual systems. On the other hand, we configure virtual disk availability in the virtualization layer, and the guest sees an already-resilient disk without being aware of the details. These blogs will discuss configuration details like this. Live migration is not "high availability" in the sense of "continuous availability": If the server is down, then you don't live migrate from it! (A cluster or VM restart elsewhere would be used). However, live migration can be part of the RAS (Reliability, Availability, Serviceability) picture by improving Serviceability - you can move running domains off of a box before planned service or maintenance. The blog Best Practices - Live Migration on Oracle VM Server for SPARC discusses this. Topics Here are some of the topics that will be covered: Network availability using IP Multipathing and aggregates Disk path availability using virtual disks defined with multipath groups ("mpgroup") Disk media resiliency configuring for redundant disks that can tolerate media loss Multiple service domains - this is probably the most significant item and the one most specific to Oracle VM Server for SPARC. It is very widely deployed in production environments as the means to provide network and disk availability, but it can be confusing. Subsequent articles will describe why and how to configure multiple service domains. Note, for the sake of precision: an I/O domain is any domain that has a physical I/O resource (such as a PCIe bus root complex). A service domain is a domain providing virtual device services to other domains; it is almost always an I/O domain too (so it can have something to serve). Resources Here are some important links; we'll be drawing on their content in the next several articles: Oracle VM Server for SPARC Documentation Maximizing Application Reliability and Availability with SPARC T5 Servers whitepaper by Gary Combs Maximizing Application Reliability and Availability with the SPARC M5-32 Server whitepaper by Gary Combs Summary Oracle VM Server for SPARC offers features that can be used to provide highly-available environments. This and the following blog entries will describe how to plan and deploy them.

  Read the article

• Working with packed dates in SSIS

  - by Jim Giercyk

  One of the challenges recently thrown my way was to read an EBCDIC flat file, decode packed dates, and insert the dates into a SQL table.  For those unfamiliar with packed data, it is a way to store data at the nibble level (half a byte), and was often used by mainframe programmers to conserve storage space.  In the case of my input file, the dates were 2 bytes long and  represented the number of days that have past since 01/01/1950.  My first thought was, in the words of Scooby, Hmmmmph?  But, I love a good challenge, so I dove in. Reading in the flat file was rather simple.  The only difference between reading an EBCDIC and an ASCII file is the Code Page option in the connection manager.  In my case, I needed to use Code Page 1140 for EBCDIC (I could have also used Code Page 37).       Once the code page is set correctly, SSIS can understand what it is reading and it will convert the output to the default code page, 1252.  However, packed data is either unreadable or produces non-alphabetic characters, as we can see in the preview window.   Column 1 is actually the packed date, columns 0 and 2 are the values in the rest of the file.  We are only interested in Column 1, which is a 2 byte field representing a packed date.  We know that 2 bytes of packed data can be stored in 1 byte of character data, so we are working with 4 packed digits in 2 character bytes.  If you are confused, stay tuned….this will make sense in a minute.   Right-click on your Flat File Source shape and select “Show Advanced Editor”. Here is where the magic begins. By changing the properties of the output columns, we can access the packed digits from each byte. By default, the Output Column data type is DT_STR. Since we want to look at the bytes individually and not the entire string, change the data type to DT_BYTES. Next, and most important, set UseBinaryFormat to TRUE. This will write the HEX VALUES of the output string instead of writing the character values.  Now we are getting somewhere! Next, you will need to use a Data Conversion shape in your Data Flow to transform the 2 position byte stream to a 4 position Unicode string containing the packed data.  You need the string to be 4 bytes long because it will contain the 4 packed digits.  Here is what that should look like in the Data Conversion shape: Direct the output of your data flow to a test table or file to see the results.  In my case, I created a test table.  The results looked like this:     Hold on a second!  That doesn't look like a date at all.  No, of course not.  It is a hex number which represents the days which have passed between 01/01/1950 and the date.  We have to convert the Hex value to a decimal value, and use the DATEADD function to get a date value.  Luckily, I have created a function to convert Hex to Decimal:   -- ============================================= -- Author:        Jim Giercyk -- Create date: March, 2012 -- Description:    Converts a Hex string to a decimal value -- ============================================= CREATE FUNCTION [dbo].[ftn_HexToDec] (     @hexValue NVARCHAR(6) ) RETURNS DECIMAL AS BEGIN     -- Declare the return variable here DECLARE @decValue DECIMAL IF @hexValue LIKE '0x%' SET @hexValue = SUBSTRING(@hexValue,3,4) DECLARE @decTab TABLE ( decPos1 VARCHAR(2), decPos2 VARCHAR(2), decPos3 VARCHAR(2), decPos4 VARCHAR(2) ) DECLARE @pos1 VARCHAR(1) = SUBSTRING(@hexValue,1,1) DECLARE @pos2 VARCHAR(1) = SUBSTRING(@hexValue,2,1) DECLARE @pos3 VARCHAR(1) = SUBSTRING(@hexValue,3,1) DECLARE @pos4 VARCHAR(1) = SUBSTRING(@hexValue,4,1) INSERT @decTab VALUES (CASE               WHEN @pos1 = 'A' THEN '10'                 WHEN @pos1 = 'B' THEN '11'               WHEN @pos1 = 'C' THEN '12'               WHEN @pos1 = 'D' THEN '13'               WHEN @pos1 = 'E' THEN '14'               WHEN @pos1 = 'F' THEN '15'               ELSE @pos1              END, CASE               WHEN @pos2 = 'A' THEN '10'                 WHEN @pos2 = 'B' THEN '11'               WHEN @pos2 = 'C' THEN '12'               WHEN @pos2 = 'D' THEN '13'               WHEN @pos2 = 'E' THEN '14'               WHEN @pos2 = 'F' THEN '15'               ELSE @pos2              END, CASE               WHEN @pos3 = 'A' THEN '10'                 WHEN @pos3 = 'B' THEN '11'               WHEN @pos3 = 'C' THEN '12'               WHEN @pos3 = 'D' THEN '13'               WHEN @pos3 = 'E' THEN '14'               WHEN @pos3 = 'F' THEN '15'               ELSE @pos3              END, CASE               WHEN @pos4 = 'A' THEN '10'                 WHEN @pos4 = 'B' THEN '11'               WHEN @pos4 = 'C' THEN '12'               WHEN @pos4 = 'D' THEN '13'               WHEN @pos4 = 'E' THEN '14'               WHEN @pos4 = 'F' THEN '15'               ELSE @pos4              END) SET @decValue = (CONVERT(INT,(SELECT decPos4 FROM @decTab)))         +                 (CONVERT(INT,(SELECT decPos3 FROM @decTab))*16)      +                 (CONVERT(INT,(SELECT decPos2 FROM @decTab))*(16*16)) +                 (CONVERT(INT,(SELECT decPos1 FROM @decTab))*(16*16*16))     RETURN @decValue END GO     Making use of the function, I found the decimal conversion, added that number of days to 01/01/1950 and FINALLY arrived at my “unpacked relative date”.  Here is the query I used to retrieve the formatted date, and the result set which was returned: SELECT [packedDate] AS 'Hex Value',        dbo.ftn_HexToDec([packedDate]) AS 'Decimal Value',        CONVERT(DATE,DATEADD(day,dbo.ftn_HexToDec([packedDate]),'01/01/1950'),101) AS 'Relative String Date'   FROM [dbo].[Output Table]         This technique can be used any time you need to retrieve the hex value of a character string in SSIS.  The date example may be a bit difficult to understand at first, but with SSIS becoming the preferred tool for enterprise level integration for many companies, there is no doubt that developers will encounter these types of requirements with regularity in the future. Please feel free to contact me if you have any questions.

  Read the article

• Computer Networks UNISA - Chap 15 &ndash; Network Management

  - by MarkPearl

  After reading this section you should be able to Understand network management and the importance of documentation, baseline measurements, policies, and regulations to assess and maintain a network’s health. Manage a network’s performance using SNMP-based network management software, system and event logs, and traffic-shaping techniques Identify the reasons for and elements of an asset managements system Plan and follow regular hardware and software maintenance routines Fundamentals of Network Management Network management refers to the assessment, monitoring, and maintenance of all aspects of a network including checking for hardware faults, ensuring high QoS, maintaining records of network assets, etc. Scope of network management differs depending on the size and requirements of the network. All sub topics of network management share the goals of enhancing the efficiency and performance while preventing costly downtime or loss. Documentation The way documentation is stored may vary, but to adequately manage a network one should at least record the following… Physical topology (types of LAN and WAN topologies – ring, star, hybrid) Access method (does it use Ethernet 802.3, token ring, etc.) Protocols Devices (Switches, routers, etc) Operating Systems Applications Configurations (What version of operating system and config files for serve / client software) Baseline Measurements A baseline is a report of the network’s current state of operation. Baseline measurements might include the utilization rate for your network backbone, number of users logged on per day, etc. Baseline measurements allow you to compare future performance increases or decreases caused by network changes or events with past network performance. Obtaining baseline measurements is the only way to know for certain whether a pattern of usage has changed, or whether a network upgrade has made a difference. There are various tools available for measuring baseline performance on a network. Policies, Procedures, and Regulations Following rules helps limit chaos, confusion, and possibly downtime. The following policies and procedures and regulations make for sound network management. Media installations and management (includes designing physical layout of cable, etc.) Network addressing policies (includes choosing and applying a an addressing scheme) Resource sharing and naming conventions (includes rules for logon ID’s) Security related policies Troubleshooting procedures Backup and disaster recovery procedures In addition to internal policies, a network manager must consider external regulatory rules. Fault and Performance Management After documenting every aspect of your network and following policies and best practices, you are ready to asses you networks status on an on going basis. This process includes both performance management and fault management. Network Management Software To accomplish both fault and performance management, organizations often use enterprise-wide network management software. There various software packages that do this, each collect data from multiple networked devices at regular intervals, in a process called polling. Each managed device runs a network management agent. So as not to affect the performance of a device while collecting information, agents do not demand significant processing resources. The definition of a managed devices and their data are collected in a MIB (Management Information Base). Agents communicate information about managed devices via any of several application layer protocols. On modern networks most agents use SNMP which is part of the TCP/IP suite and typically runs over UDP on port 161. Because of the flexibility and sophisticated network management applications are a challenge to configure and fine-tune. One needs to be careful to only collect relevant information and not cause performance issues (i.e. pinging a device every 5 seconds can be a problem with thousands of devices). MRTG (Multi Router Traffic Grapher) is a simple command line utility that uses SNMP to poll devices and collects data in a log file. MRTG can be used with Windows, UNIX and Linux. System and Event Logs Virtually every condition recognized by an operating system can be recorded. This is typically done using event logs. In Windows there is a GUI event log viewer. Similar information is recorded in UNIX and Linux in a system log. Much of the information collected in event logs and syslog files does not point to a problem, even if it is marked with a warning so it is important to filter your logs appropriately to reduce the noise. Traffic Shaping When a network must handle high volumes of network traffic, users benefit from performance management technique called traffic shaping. Traffic shaping involves manipulating certain characteristics of packets, data streams, or connections to manage the type and amount of traffic traversing a network or interface at any moment. Its goals are to assure timely delivery of the most important traffic while offering the best possible performance for all users. Several types of traffic prioritization exist including prioritizing traffic according to any of the following characteristics… Protocol IP address User group DiffServr VLAN tag in a Data Link layer frame Service or application Caching In addition to traffic shaping, a network or host might use caching to improve performance. Caching is the local storage of frequently needed files that would otherwise be obtained from an external source. By keeping files close to the requester, caching allows the user to access those files quickly. The most common type of caching is Web caching, in which Web pages are stored locally. To an ISP, caching is much more than just convenience. It prevents a significant volume of WAN traffic, thus improving performance and saving money. Asset Management Another key component in managing networks is identifying and tracking its hardware. This is called asset management. The first step to asset management is to take an inventory of each node on the network. You will also want to keep records of every piece of software purchased by your organization. Asset management simplifies maintaining and upgrading the network chiefly because you know what the system includes. In addition, asset management provides network administrators with information about the costs and benefits of certain types of hardware or software. Change Management Networks are always in a stage of flux with various aspects including… Software changes and patches Client Upgrades Shared Application Upgrades NOS Upgrades Hardware and Physical Plant Changes Cabling Upgrades Backbone Upgrades For a detailed explanation on each of these read the textbook (Page 750 – 761)

  Read the article

• TFS API Add Favorites programmatically

  - by Tarun Arora

  01 – What are we trying to achieve? In this blog post I’ll be showing you how to add work item queries as favorites, it is also possible to use the same technique to add build definition as favorites. Once a shared query or build definition has been added as favorite it will show up on the team web access.  In this blog post I’ll be showing you a work around in the absence of a proper API how you can add queries to team favorites. 02 – Disclaimer There is no official API for adding favorites programmatically. In the work around below I am using the Identity service to store this data in a property bag which is used during display of favorites on the team web site. This uses an internal data structure that could change over time, there is no guarantee about the key names or content of the values. What is shown below is a workaround for a missing API. 03 – Concept There is no direct API support for favorites, but you could work around it using the identity service in TFS.  Favorites are stored in the property bag associated with the TeamFoundationIdentity (either the ‘team’ identity or the users identity depending on if these are ‘team’ or ‘my’ favorites).  The data is stored as json in the property bag of the identity, the key being prefixed by ‘Microsoft.TeamFoundation.Framework.Server.IdentityFavorites’. References - Microsoft.TeamFoundation.WorkItemTracking.Client - using Microsoft.TeamFoundation.Client; - using Microsoft.TeamFoundation.Framework.Client; - using Microsoft.TeamFoundation.Framework.Common; - using Microsoft.TeamFoundation.ProcessConfiguration.Client; - using Microsoft.TeamFoundation.Server; - using Microsoft.TeamFoundation.WorkItemTracking.Client; Services - IIdentityManagementService2 - TfsTeamService - WorkItemStore 04 – Solution Lets start by connecting to TFS programmatically // Create an instance of the services to be used during the program private static TfsTeamProjectCollection _tfs; private static ProjectInfo _selectedTeamProject; private static WorkItemStore _wis; private static TfsTeamService _tts; private static TeamSettingsConfigurationService _teamConfig; private static IIdentityManagementService2 _ids; // Connect to TFS programmatically public static bool ConnectToTfs() { var isSelected = false; var tfsPp = new TeamProjectPicker(TeamProjectPickerMode.SingleProject, false); tfsPp.ShowDialog(); _tfs = tfsPp.SelectedTeamProjectCollection; if (tfsPp.SelectedProjects.Any()) { _selectedTeamProject = tfsPp.SelectedProjects[0]; isSelected = true; } return isSelected; } Lets get all the work item queries from the selected team project static readonly Dictionary<string, string> QueryAndGuid = new Dictionary<string, string>(); // Get all queries and query guid in the selected team project private static void GetQueryGuidList(IEnumerable<QueryItem> query) { foreach (QueryItem subQuery in query) { if (subQuery.GetType() == typeof(QueryFolder)) GetQueryGuidList((QueryFolder)subQuery); else { QueryAndGuid.Add(subQuery.Name, subQuery.Id.ToString()); } } }   Pass the name of a valid Team in your team project and a name of a valid query in your team project. The team details will be extracted using the team name and query GUID will be extracted using the query name. These details will be used to construct the key and value that will be passed to the SetProperty method in the Identity service.           Key           “Microsoft.TeamFoundation.Framework.Server.IdentityFavorites..<TeamProjectURI>.<TeamId>.WorkItemTracking.Queries.<newGuid1>”           Value           "{"data":"<QueryGuid>","id":"<NewGuid1>","name":"<QueryKey>","type":"Microsoft.TeamFoundation.WorkItemTracking.QueryItem”}"           // Configure a Work Item Query for the given team private static void ConfigureTeamFavorites(string teamName, string queryName) { _ids = _tfs.GetService<IIdentityManagementService2>(); var g = Guid.NewGuid(); var guid = string.Empty; var teamDetail = _tts.QueryTeams(_selectedTeamProject.Uri).FirstOrDefault(t => t.Name == teamName); foreach (var q in QueryAndGuid.Where(q => q.Key == queryName)) { guid = q.Value; } if(guid == string.Empty) { Console.WriteLine("Query '{0}' - Not found!", queryName); return; } var key = string.Format( "Microsoft.TeamFoundation.Framework.Server.IdentityFavorites..{0}.{1}.WorkItemTracking.Queries{2}", new Uri(_selectedTeamProject.Uri).Segments.LastOrDefault(), teamDetail.Identity.TeamFoundationId, g); var value = string.Format( @"{0}""data"":""{1}"",""id"":""{2}"",""name"":""{3}"",""type"":""Microsoft.TeamFoundation.WorkItemTracking.QueryItem""{4}", "{", guid, g, QueryAndGuid.FirstOrDefault(q => q.Value==guid).Key, "}"); teamDetail.Identity.SetProperty(IdentityPropertyScope.Local, key, value); _ids.UpdateExtendedProperties(teamDetail.Identity); Console.WriteLine("{0}Added Query '{1}' as Favorite", Environment.NewLine, queryName); }   If you have any questions or suggestions leave a comment. Enjoy!

  Read the article

• Computer Networks UNISA - Chap 14 &ndash; Insuring Integrity &amp; Availability

  - by MarkPearl

  After reading this section you should be able to Identify the characteristics of a network that keep data safe from loss or damage Protect an enterprise-wide network from viruses Explain network and system level fault tolerance techniques Discuss issues related to network backup and recovery strategies Describe the components of a useful disaster recovery plan and the options for disaster contingencies What are integrity and availability? Integrity – the soundness of a networks programs, data, services, devices, and connections Availability – How consistently and reliably a file or system can be accessed by authorized personnel A number of phenomena can compromise both integrity and availability including… security breaches natural disasters malicious intruders power flaws human error users etc Although you cannot predict every type of vulnerability, you can take measures to guard against the most damaging events. The following are some guidelines… Allow only network administrators to create or modify NOS and application system users. Monitor the network for unauthorized access or changes Record authorized system changes in a change management system’ Install redundant components Perform regular health checks on the network Check system performance, error logs, and the system log book regularly Keep backups Implement and enforce security and disaster recovery policies These are just some of the basics… Malware Malware refers to any program or piece of code designed to intrude upon or harm a system or its resources. Types of Malware… Boot sector viruses Macro viruses File infector viruses Worms Trojan Horse Network Viruses Bots Malware characteristics Some common characteristics of Malware include… Encryption Stealth Polymorphism Time dependence Malware Protection There are various tools available to protect you from malware called anti-malware software. These monitor your system for indications that a program is performing potential malware operations. A number of techniques are used to detect malware including… Signature Scanning Integrity Checking Monitoring unexpected file changes or virus like behaviours It is important to decide where anti-malware tools will be installed and find a balance between performance and protection. There are several general purpose malware policies that can be implemented to protect your network including… Every compute in an organization should be equipped with malware detection and cleaning software that regularly runs Users should not be allowed to alter or disable the anti-malware software Users should know what to do in case the anti-malware program detects a malware virus Users should be prohibited from installing any unauthorized software on their systems System wide alerts should be issued to network users notifying them if a serious malware virus has been detected. Fault Tolerance Besides guarding against malware, another key factor in maintaining the availability and integrity of data is fault tolerance. Fault tolerance is the ability for a system to continue performing despite an unexpected hardware or software malfunction. Fault tolerance can be realized in varying degrees, the optimal level of fault tolerance for a system depends on how critical its services and files are to productivity. Generally the more fault tolerant the system, the more expensive it is. The following describe some of the areas that need to be considered for fault tolerance. Environment (Temperature and humidity) Power Topology and Connectivity Servers Storage Power Typical power flaws include Surges – a brief increase in voltage due to lightening strikes, solar flares or some idiot at City Power Noise – Fluctuation in voltage levels caused by other devices on the network or electromagnetic interference Brownout – A sag in voltage for just a moment Blackout – A complete power loss The are various alternate power sources to consider including UPS’s and Generators. UPS’s are found in two categories… Standby UPS – provides continuous power when mains goes down (brief period of switching over) Online UPS – is online all the time and the device receives power from the UPS all the time (the UPS is charged continuously) Servers There are various techniques for fault tolerance with servers. Server mirroring is an option where one device or component duplicates the activities of another. It is generally an expensive process. Clustering is a fault tolerance technique that links multiple servers together to appear as a single server. They share processing and storage responsibilities and if one unit in the cluster goes down, another unit can be brought in to replace it. Storage There are various techniques available including the following… RAID Arrays NAS (Storage (Network Attached Storage) SANs (Storage Area Networks) Data Backup A backup is a copy of data or program files created for archiving or safekeeping. Many different options for backups exist with various media including… These vary in cost and speed. Optical Media Tape Backup External Disk Drives Network Backups Backup Strategy After selecting the appropriate tool for performing your servers backup, devise a backup strategy to guide you through performing reliable backups that provide maximum data protection. Questions that should be answered include… What data must be backed up At what time of day or night will the backups occur How will you verify the accuracy of the backups Where and for how long will backup media be stored Who will take responsibility for ensuring that backups occurred How long will you save backups Where will backup and recovery documentation be stored Different backup methods provide varying levels of certainty and corresponding labour cost. There are also different ways to determine which files should be backed up including… Full backup – all data on all servers is copied to storage media Incremental backup – Only data that has changed since the last full or incremental backup is copied to a storage medium Differential backup – Only data that has changed since the last backup is coped to a storage medium Disaster Recovery Disaster recovery is the process of restoring your critical functionality and data after an enterprise wide outage has occurred. A disaster recovery plan is for extreme scenarios (i.e. fire, line fault, etc). A cold site is a place were the computers, devices, and connectivity necessary to rebuild a network exist but they are not appropriately configured. A warm site is a place where the computers, devices, and connectivity necessary to rebuild a network exists with some appropriately configured devices. A hot site is a place where the computers, devices, and connectivity necessary to rebuild a network exists and all are appropriately configured.

  Read the article

• ADF version of "Modern" dialog windows

  - by Martin Deh

  It is no surprise with the popularity of the i-devices (iphone, ipad), that many of the iOS UI based LnF (look and feel) would start to inspire web designers to incorporate the same LnF into their web sites.  Take for example, a normal dialog popup.  In the iOS world, the LnF becomes a bit more elegant by add just a simple element as a "floating" close button: In this blog post, I will describe how this can be accomplished using OOTB ADF components and CSS3 style elements. There are two ways that this can be achieved.  The easiest way is to simply replace the default image, which looks like this, and adjust the af|panelWindow:close-icon-style skin selector.   Using this simple technique, you can come up with this: The CSS code to produce this effect is pretty straight forward: af|panelWindow.test::close-icon-style{    background-image: url("../popClose.gif");    line-height: 10px;    position: absolute;    right: -10px;    top: -10px;    height:38px;    width:38px;    outline:none; } You can see from the CSS, the position of the region, which holds the image, is relocated based on the position based attributes.  Also, the addition of the "outline" attribute removes the border that is visible in Chrome and IE.  The second example, is based on not having an image to produce the close button.  Like the previous sample, I will use the OOTB panelWindow.  However, this time I will use a OOTB commandButton to replace the image.  The construct of the components looks like this: The commandButton is positioned first in the hierarchy making the re-positioning easier.  The commandButton will also need a style class assigned to it (i.e. closeButton), which will allow for the positioning and the over-riding of the default skin attributes of a default button.  In addition, the closeIconVisible property is set to false, since the default icon is no longer needed.  Once this is done, the rest is in the CSS.  Here is the sample that I created that was used for an actual customer POC: The CSS code for the button: af|commandButton.closeButton, af|commandButton.closeButton af|commandButton:text-only{     line-height: 10px;     position: absolute;     right: -10px;     top: -10px;     -webkit-border-radius: 70px;     -moz-border-radius: 70px;     -ms-border-radius: 70px;     border-radius: 70px;     background-image:none;     border:#828c95 1px solid;     background-color:black;     font-weight: bold;     text-align: center;     text-decoration: none;     color:white;     height:30px;     width:30px;     outline:none; } The CSS uses the border radius to create the round effect on the button (in IE 8, since border-radius is not supported, this will only work with some added code). Also, I add the box-shadow attribute to the panelWindow style class to give it a nice shadowing effect.

  Read the article

• "Imprinting" as a language feature?

  - by MKO

  Idea I had this idea for a language feature that I think would be useful, does anyone know of a language that implements something like this? The idea is that besides inheritance a class can also use something called "imprinting" (for lack of better term). A class can imprint one or several (non-abstract) classes. When a class imprints another class it gets all it's properties and all it's methods. It's like the class storing an instance of the imprinted class and redirecting it's methods/properties to it. A class that imprints another class therefore by definition also implements all it's interfaces and it's abstract class. So what's the point? Well, inheritance and polymorphism is hard to get right. Often composition gives far more flexibility. Multiple inheritance offers a slew of different problems without much benefits (IMO). I often write adapter classes (in C#) by implementing some interface and passing along the actual methods/properties to an encapsulated object. The downside to that approach is that if the interface changes the class breaks. You also you have to put in a lot of code that does nothing but pass things along to the encapsulated object. A classic example is that you have some class that implements IEnumerable or IList and contains an internal class it uses. With this technique things would be much easier Example (c#) [imprint List<Person> as peopleList] public class People : PersonBase { public void SomeMethod() { DoSomething(this.Count); //Count is from List } } //Now People can be treated as an List<Person> People people = new People(); foreach(Person person in people) { ... } peopleList is an alias/variablename (of your choice)used internally to alias the instance but can be skipped if not needed. One thing that's useful is to override an imprinted method, that could be achieved with the ordinary override syntax public override void Add(Person person) { DoSomething(); personList.Add(person); } note that the above is functional equivalent (and could be rewritten by the compiler) to: public class People : PersonBase , IList<Person> { private List<Person> personList = new List<Person>(); public override void Add(object obj) { this.personList.Add(obj) } public override int IndexOf(object obj) { return personList.IndexOf(obj) } //etc etc for each signature in the interface } only if IList changes your class will break. IList won't change but an interface that you, someone in your team, or a thirdparty has designed might just change. Also this saves you writing a whole lot of code for some interfaces/abstract classes. Caveats There's a couple of gotchas. First we, syntax must be added to call the imprinted classes's constructors from the imprinting class constructor. Also, what happends if a class imprints two classes which have the same method? In that case the compiler would detect it and force the class to define an override of that method (where you could chose if you wanted to call either imprinted class or both) So what do you think, would it be useful, any caveats? It seems it would be pretty straightforward to implement something like that in the C# language but I might be missing something :) Sidenote - Why is this different from multiple inheritance Ok, so some people have asked about this. Why is this different from multiple inheritance and why not multiple inheritance. In C# methods are either virtual or not. Say that we have ClassB who inherits from ClassA. ClassA has the methods MethodA and MethodB. ClassB overrides MethodA but not MethodB. Now say that MethodB has a call to MethodA. if MethodA is virtual it will call the implementation that ClassB has, if not it will use the base class, ClassA's MethodA and you'll end up wondering why your class doesn't work as it should. By the terminology sofar you might already confused. So what happens if ClassB inherits both from ClassA and another ClassC. I bet both programmers and compilers will be scratching their heads. The benefit of this approach IMO is that the imprinting classes are totally encapsulated and need not be designed with multiple inheritance in mind. You can basically imprint anything.

  Read the article

• Web Services Example - Part 2: Programmatic

  - by Denis T

  In this edition of the ADF Mobile blog we'll tackle part 2 of our Web Service examples.  In this posting we'll take a look at using a SOAP Web Service but calling it programmatically in code and parsing the return into a bean. Getting the sample code: Just click here to download a zip of the entire project.  You can unzip it and load it into JDeveloper and deploy it either to iOS or Android.  Please follow the previous blog posts if you need help getting JDeveloper or ADF Mobile installed.  Note: This is a different workspace than WS-Part1 Defining our Web Service: Just like our first installment, we are using the same public weather forecast web service provided free by CDYNE Corporation.  Sometimes this service goes down so please ensure you know it's up before reporting this example isn't working. We're going to concentrate on the same two web service methods, GetCityForecastByZIP and GetWeatherInformation. Defing the Application: The application setup is identical to the Weather1 version.  There are some improvements to the data that is displayed as part of this example though.  Now we are able to show the associated image along with each forecast line when using the Forecast By Zip feature.  We've also added the temperature Hi/Low values into the UI. Summary of Fundamental Changes In This Application The most fundamental change is that we're binding the UI to the Bean Data Controls instead of directly to the Web Service Data Controls.  This gives us much more flexibility to control the shape of the data and allows us to do caching of the data outside of the Web Service.  This way if your application is, say offline, your bean could still populate with data from a local cache and still show you some UI as opposed to completely failing because you don't have any connectivity. In general we promote this type of programming technique with ADF Mobile to insulate your application from any issues with network connectivity. What's different with this example? We have setup the Web Service DC the same way but now we have managed beans to process the data.  The following classes define the "Model" of our application:  CityInformation-CityForecast-Forecast, WeatherInformation-WeatherDescription.  We use WeatherBean for UI interaction to the model layer.  If you look through this example, we don't really do that much with the java code except use it to grab the image URL from the weather description.  In a more realistic example, you might be using some JDBC classes to persist the data to a local database. To have a good architecture it is always good to keep your model and UI layers separate.  This gets muddied if you start to use bindings on a page invoked from Java code and this java code starts to become your "model" layer.  Since bindings are page specific, your model layer starts to become entwined with your UI.  Not good!  To help with this, we've added some utility functions that let you invoke DC methods without having a binding and thus execute methods from your "model" layer without requiring a binding in your page definition.  We do this with the invokeDataControlMethod of the AdfmfJavaUtilities class.  An example of this method call is available in line 95 of WeatherInformation.java and line 93 of CityInformation.Java. What's a GenericType? Because Web Service Data Controls (and also URL Data Controls AKA REST) use generic name/value pairs to define their structure and don't have strongly typed objects, these are actually stored internally as GenericType objects.  The GenericType class is simply a property map of name/value pairs that can be hierarchical.  There are methods like getAttribute where you supply the index of the attribute or it's string property name.  Why is this important to know?  Because invokeDataControlMethod returns GenericType objects and developers either need to parse these GenericType objects themselves or use one of our helper functions. GenericTypeBeanSerializationHelper This class does exactly what it's name implies.  It's a helper class for developers to aid in serialization of GenericTypes to/from java objects.  This is extremely handy if you have a large GenericType object with many attributes (or you're just lazy like me!) and you just want to parse it out into a real java object you can use more easily.  Here you would use the fromGenericType method.  This method takes the class of the Java object you wish to return and the GenericType as parameters.  The method then parses through each attribute in the GenericType and uses reflection to set that same attribute in the Java class.  Then the method returns that new object of the class you specified.  This is obviously very handy to avoid a lot of shuffling code between GenericType and your own Java classes.  The reverse method, toGenericType is also available when you want to go the other way.  In this case you supply the string that represents the package location in the DataControl definition (Example: "MyDC.myParams.MyCollection") and then pass in the Java object you have that holds the data and a GenericType is returned to you.  Again, it will use reflection to calculate the attributes that match between the java class and the GenericType and call the getters/setters on those. Issues and Possible Improvements: In the next installment we'll show you how to make your web service calls asynchronously so your UI will fill dynamically when the service call returns but in the meantime you show the data you have locally in your bean fed from some local cache.  This gives your users instant delivery of some data while you fetch other data in the background.

  Read the article

• "Guiding" a Domain Expert to Retire from Programming

  - by James Kolpack

  I've got a friend who does IT at a local non-profit where they're using a custom web application which is no longer supported by the company who built it. (out of business, support was too expensive, I'm not sure...) Development on this app started around 10+ years ago so the technologies being harnessed are pretty out of date now - classic asp using vbscript and SQL Server 2000. The application domain is in the realm of government bookkeeping - so even though the development team is long gone, there are often new requirements of this software. Enter the... The domain expert. This is an middle aged accounting whiz without much (or any?) prior development experience. He studied the pages, code and queries and learned how to ape the style of the original team which, believe me, is mediocre at best. He's very clever and very tenacious but has no experience in software beyond what he's picked up from this app. Otherwise, he's a pleasant guy to talk to and definitely knows his domain. My friend in IT, and probably his superiors in the company, want him out of the code. They view him as wasting his expertise on coding tasks he shouldn't be doing. My friend got me involved with a few small contracts which I handled without much problem - other than somewhat of a communication barrier with the domain expert. He explained the requirements very quickly, assuming prior knowledge of the domain which I do not have. This is partially his normal style, and I think maybe a bit of resentment from my involvement. So, I think he feels like the owner of the code and has entrenched himself in a development position. So... his coding technique. One of his latest endeavors was to make a page that only he could reach (theoretically - the security model for the system is wretched) where he can enter a raw SQL query, run it, and save the query to run again later. A report that I worked on had been originally implemented by him using 6 distinct queries, 3 or 4 temp tables to coordinate the data between the queries, and the final result obtained by importing the data from the final query into Access and doing a pivot and some formatting. It worked - well, some of the results were incorrect - but at what a cost! (I implemented the report in a single query with at least 1/10th the amount of code.) He edits code in notepad. He doesn't seem to know about online reference material for the languages. I recently read an article on Dr. Dobbs titled "What Makes Bad Programmers Different" - and instantly thought of our domain expert. From the article: Their code is large, messy, and bug laden. They have very superficial knowledge of their problem domain and their tools. Their code has a lot of copy/paste and they have very little interest in techniques that reduce it. The fail to account for edge cases, while inefficiently dealing with the general case. They never have time to comment their code or break it into smaller pieces. Empirical evidence plays no little role in their decisions. 5.5 out of 6. My friend is wanting me to argue the case to their management - specifically, I got this email from their manager to respond to: ...Also, I need to talk to you about what effect there is from Domain Expert continuing to make edits to the live environment. If that is a problem for you I need to know so I can have his access blocked. Some examples would help. In my opinion, from a technical standpoint, it's dangerous to have him making changes without any oversight. On the other hand, I'm just doing one-off contracts at this point and don't have much desire to get involved deeply enough that I'm essentially arguing as one of the Bobs from Office Space. I'd like to help my friend out - but I feel like I'm getting in the middle of a political battle. More importantly - if I do get involved and suggest that his editing privileges be removed, it needs to be handled carefully so that doesn't feel belittled. He is beyond a doubt the foremost expert on this system. I'm hoping this is familiar territory for some other stackechangers, because I'm feeling a little bewildered. How should I respond? Should I argue that he shouldn't be allowed to touch the code? Should I phrase it as "no single developer, no matter how experienced, should be working on production code unchecked"? Should I argue to keep him involved with the code, but with a review process? Should I say "glad I could help, but uh, I'm busy now!" Other options? Thanks a bunch!

  Read the article

• WMemoryProfiler is Released

  - by Alois Kraus

  What is it? WMemoryProfiler is a managed profiling Api to aid integration testing. This free library can get managed heap statistics and memory usage for your own process (remember testing) and other processes as well. The best thing is that it does work from .NET 2.0 up to .NET 4.5 in x86 and x64. To make it more interesting it can attach to any running .NET process. The reason why I do mention this is that commercial profilers do support this functionality only for their professional editions. An normally only since .NET 4.0 since the profiling API only since then does support attaching to a running process. This thing does differ in many aspects from “normal” profilers because while profiling yourself you can get all objects from all managed heaps back as an object array. If you ever wanted to change the state of an object which does only exist a method local in another thread you can get your hands on it now … Enough theory. Show me some code /// <summary> /// Show feature to not only get statisics out of a process but also the newly allocated /// instances since the last call to MarkCurrentObjects. /// GetNewObjects does return the newly allocated objects as object array /// </summary> static void InstanceTracking() { using (var dumper = new MemoryDumper()) // if you have problems use to see the debugger windows true,true)) { dumper.MarkCurrentObjects(); Allocate(); ILookup<Type, object> newObjects = dumper.GetNewObjects() .ToLookup( x => x.GetType() ); Console.WriteLine("New Strings:"); foreach (var newStr in newObjects[typeof(string)] ) { Console.WriteLine("Str: {0}", newStr); } } } … New Strings: Str: qqd Str: String data: Str: String data: 0 Str: String data: 1 … This is really hot stuff. Not only you can get heap statistics but you can directly examine the new objects and make queries upon them. When I do find more time I can reconstruct the object root graph from it from my own process. It this cool or what? You can also peek into the Finalization Queue to check if you did accidentally forget to dispose a whole bunch of objects … /// <summary> /// .NET 4.0 or above only. Get all finalizable objects which are ready for finalization and have no other object roots anymore. /// </summary> static void NotYetFinalizedObjects() { using (var dumper = new MemoryDumper()) { object[] finalizable = dumper.GetObjectsReadyForFinalization(); Console.WriteLine("Currently {0} objects of types {1} are ready for finalization. Consider disposing them before.", finalizable.Length, String.Join(",", finalizable.ToLookup( x=> x.GetType() ) .Select( x=> x.Key.Name)) ); } } How does it work? The W of WMemoryProfiler is a good hint. It does employ Windbg and SOS dll to do the heavy lifting and concentrates on an easy to use Api which does hide completely Windbg. If you do not want to see Windbg you will never see it. In my experience the most complex thing is actually to download Windbg from the Windows 8 Stanalone SDK. This is described in the Readme and the exception you are greeted with if it is missing in much greater detail. So I will not go into this here.   What Next? Depending on the feedback I do get I can imagine some features which might be useful as well Calculate first order GC Roots from the actual object graph Identify global statics in Types in object graph Support read out of finalization queue of .NET 2.0 as well. Support Memory Dump analysis (again a feature only supported by commercial profilers in their professional editions if it is supported at all) Deserialize objects from a memory dump into a live process back (this would need some more investigation but it is doable) The last item needs some explanation. Why on earth would you want to do that? The basic idea is to store in your live process some logging/tracing data which can become quite big but since it is never written to it is very fast to generate. When your process crashes with a memory dump you could transfer this data structure back into a live viewer which can then nicely display your program state at the point it did crash. This is an advanced trouble shooting technique I have not seen anywhere yet but it could be quite useful. You can have here a look at the current feature list of WMemoryProfiler with some examples.   How To Get Started? First I would download the released source package (it is tiny). And compile the complete project. Then you can compile the Example project (it has this name) and uncomment in the main method the scenario you want to check out. If you are greeted with an exception it is time to install the Windows 8 Standalone SDK which is described in great detail in the exception text. Thats it for the first round. I have seen something more limited in the Java world some years ago (now I cannot find the link anymore) but anyway. Now we have something much better.

  Read the article

• An offscreen MKMapView behaves differently in 3.2, 4.0

  - by Duane Fields

  In 3.1 I've been using an "offscreen" MKMapView to create map images that I can rotate, crop and so forth before presenting them the user. In 3.2 and 4.0 this technique no longer works quite right. Here's some code that illustrates the problem, followed by my theory. // create map view _mapView = [[MKMapView alloc] initWithFrame:CGRectMake(0, 0, MAP_FRAME_SIZE, MAP_FRAME_SIZE)]; _mapView.zoomEnabled = NO; _mapView.scrollEnabled = NO; _mapView.delegate = self; _mapView.mapType = MKMapTypeSatellite; // zoom in to something enough to fill the screen MKCoordinateRegion region; CLLocationCoordinate2D center = {30.267222, -97.763889}; region.center = center; MKCoordinateSpan span = {0.1, 0.1 }; region.span = span; _mapView.region = region; // set scrollview content size to full the imageView _scrollView.contentSize = _imageView.frame.size; // force it to load #ifndef __IPHONE_3_2 // in 3.1 we can render to an offscreen context to force a load UIGraphicsBeginImageContext(_mapView.frame.size); [_mapView.layer renderInContext:UIGraphicsGetCurrentContext()]; UIGraphicsEndImageContext(); #else // in 3.2 and above, the renderInContext trick doesn't work... // this at least causes the map to render, but it's clipped to what appears to be // the viewPort size, plus some padding [self.view addSubview:_mapView]; #endif when the map is done loading, I snap picture of it and stuff it in my scrollview - (void)mapViewDidFinishLoadingMap:(MKMapView *)mapView { NSLog(@"[MapBuilder] mapViewDidFinishLoadingMap"); // render the map to a UIImage UIGraphicsBeginImageContext(mapView.bounds.size); // the first sub layer is just the map, the second is the google layer, this sublayer structure might change of course [[[mapView.layer sublayers] objectAtIndex:0] renderInContext:UIGraphicsGetCurrentContext()]; // we are done with the mapView at this point, we need its ram! _mapView.delegate = nil; [_mapView release]; [_mapView removeFromSuperview]; _mapView = nil; UIImage* mapImage = [UIGraphicsGetImageFromCurrentImageContext() retain]; UIGraphicsEndImageContext(); _imageView.image = mapImage; [mapImage release], mapImage = nil; } The first problem is that in 3.1 rendering to a context would trigger the map to begin loading. This no longer works in 3.2, 4.0. The only thing I have found would trigger the load is to temporarily add the map to the view (i.e. make it visible). The problem being that the map only renders to the visible area of the screen, plus a little padding. The frame/bounds are fine, but it appears to be "helpfully" optimizes the loading to limit the tiles to those visible on the screen or close to it. Any ideas how to force the map to load at full size? Anyone else have this issue?

  Read the article

• Creating Entity Framework objects with Unity for Unit of Work/Repository pattern

  - by TobyEvans

  Hi there, I'm trying to implement the Unit of Work/Repository pattern, as described here: http://blogs.msdn.com/adonet/archive/2009/06/16/using-repository-and-unit-of-work-patterns-with-entity-framework-4-0.aspx This requires each Repository to accept an IUnitOfWork implementation, eg an EF datacontext extended with a partial class to add an IUnitOfWork interface. I'm actually using .net 3.5, not 4.0. My basic Data Access constructor looks like this: public DataAccessLayer(IUnitOfWork unitOfWork, IRealtimeRepository realTimeRepository) { this.unitOfWork = unitOfWork; this.realTimeRepository = realTimeRepository; } So far, so good. What I'm trying to do is add Dependency Injection using the Unity Framework. Getting the EF data context to be created with Unity was an adventure, as it had trouble resolving the constructor - what I did in the end was to create another constructor in my partial class with a new overloaded constructor, and marked that with [InjectionConstructor] [InjectionConstructor] public communergyEntities(string connectionString, string containerName) :this() { (I know I need to pass the connection string to the base object, that can wait until once I've got all the objects initialising correctly) So, using this technique, I can happily resolve my entity framework object as an IUnitOfWork instance thus: using (IUnityContainer container = new UnityContainer()) { container.RegisterType<IUnitOfWork, communergyEntities>(); container.Configure<InjectedMembers>() .ConfigureInjectionFor<communergyEntities>( new InjectionConstructor("a", "b")) DataAccessLayer target = container.Resolve<DataAccessLayer>(); Great. What I need to do now is create the reference to the repository object for the DataAccessLayer - the DAL only needs to know the interface, so I'm guessing that I need to instantiate it as part of the Unity Resolve statement, passing it the appropriate IUnitOfWork interface. In the past, I would have just passed the Repository constructor the db connection string, and it would have gone away, created a local Entity Framework object and used that just for the lifetime of the Repository method. This is different, in that I create an Entity Framework instance as an IUnitOfWork implementation during the Unity Resolve statement, and it's that instance I need to pass into the constructor of the Repository - is that possible, and if so, how? I'm wondering if I could make the Repository a property and mark it as a Dependency, but that still wouldn't solve the problem of how to create the Repository with the IUnitOfWork object that the DAL is being Resolved with I'm not sure if I've understood this pattern correctly, and will happily take advice on the best way to implement it - Entity Framework is staying, but Unity can be swapped out if not the best approach. If I've got the whole thing upside down, please tell me thanks

  Read the article

• Combining mousedown and mousemove events together with Javascript (JQUERY?)

  - by webzide

  Dear experts, I would like to combine a the mousedown and mousemove and mouseup events together. Basically the application of this would be making a UI for selecting elements. Like selecting icons in windows when the mouse is clicked down and as you move it, a dotted border dynamically moves with it. I know this is possible with the predefined UI of Jquery. But I am building a web application that requires the integration of this and would like to know the technique. I spend hours on this and it just doesn't work. here's is the code i have so far and the logic behind it: $(document).bind('mousedown', function (evt) { evt = (evt) ? evt : event; startX = evt.clientX; startY = evt.clientY; div = document.createElement("div"); div.style.position = "absolute"; div.style.left = startX + "px"; div.style.top = startY + "px"; div.style.border = "1px dotted #DDDDDD"; $(document).bind('mousemove', function(evt){ evt=(evt) ? evt: event; alert("TESTING OF THIS WORKS"); }); }); $(document).bind('mouseup',function(evt) { var evt = (evt) ? evt : event; var endX = evt.clientX; var endY = evt.clientY; difX = (endX - startX); difY = (endY - startY) if ((difX || difY) > 0) { div.style.width = difX + "px"; div.style.height = difY + "px"; document.body.appendChild(div); } $(this).unbind('mousemove'); }); As you can see I have placed an event binding of mousemove into the event function of mousedown so that it can only be invoked when the mouse is down. but the problem is, once that event is binded, it does not come off. The borders does not move dynamically as expected. Maybe my logic is entirely messed up. If anyone could point me the the right direction that would be great. THanks in advance.

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >