Search Results

Search found 23098 results on 924 pages for 'multiple processes'.

Page 580/924 | < Previous Page | 576 577 578 579 580 581 582 583 584 585 586 587  | Next Page >

• Thread Synchronization and Synchronization Primitives

  When considering synchronization in an application, the decision truly depends on what the application and its worker threads are going to do. I would use synchronization if two or more threads could possibly manipulate the same instance of an object at the same time. An example of this in C# can be demonstrated through the use of storing data in a static object. A static object is initialized once per application and the data within the object can be accessed by all threads. I would use the synchronization primitives to prevent any data from being manipulated by multiple threads simultaneously. This would reduce any data corruption from occurring within the object. On the other hand if all the threads used non static objects and were independent of the other tasks there would be no need to use synchronization. Synchronization Primitives in C#: Basic Blocking Locking Signaling Non-Blocking Synchronization Constructs The Basic Blocking methods include Sleep, Join, and Task.Wait.  These methods force threads to wait until other threads have completed. In addition, these methods can also force a thread to wait a set amount of time before continuing to work.   The Locking primitive prevents a thread from entering a critical section of code while another thread is in the same critical section.  If another thread attempts to enter a locked code, it will wait, until the code block is released. The Signaling primitive allows a thread to temporarily pause work until receiving a notification from another thread that it is ok to continue working. The Signaling primitive removes the need for polling.The Non-Blocking Synchronization Constructs protect access to a common field by calling upon processor primitives.

  Read the article

• Stream Media and Live TV Across the Internet with Orb

  - by DigitalGeekery

  Looking for a way to stream your media collection across the Internet? Or perhaps watch and record TV remotely? Today we are going to look at how to do all that and more with Orb. Requirements Windows XP / Vista / 7 or Intel based Mac w/ OS X 10.5 or later. 1 GB RAM or more Pentium 4 2.4 GHz or higher / AMD Athlon 3200+ Broadband connections TV Tuner for streaming and recording live TV (optional) Note: Slower internet connections may result in stuttering during playback. Installation and Setup Download and install Orb on your home computer. (Download link below) You’ll want to take the defaults for the initial portion of the install. When we get to the Orb Account setup portion of the install is when we will have to enter information and make some decisions. Choose your language and click Next. We’ll need to create and user account and password. A valid email address is required as we’ll need to confirm the account later. Click Next.   Now you’ll want to choose your media sources. Orb will automatically look for folders that may contain media files. You can add or remove folders click on the (+) or (-) buttons. To remove a folder, click on it once to select it from the list and then click the minus (-) button. To add a folder, click the plus (+) button and browse for the folder. You can add local folders as well as shared folders from networked computers and USB attached storage. Note: Both the host computer running Orb and the networked computer will need to be running to access shared network folders remotely. When you’ve selected all your media files, click Next. Orb will proceed to index your media files… When the indexing is complete, click Next. Orb TV Setup Note: Streaming Live TV to Macs is not currently supported. If you have a TV tuner card connected to your PC, you can opt to configure Orb to stream live or recorded TV. Click Next  to configure TV. Or, choose Skip if you don’t wish to configure Orb for TV.   If you have a Digital tuner card, type in your Zip Code and click Get List to pull your channel listings. Select a TV provider from the list and click Next. If not, click Skip.   You can select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Next choose an analog provider, if necessary, and click Next.   Select “Yes” or “No” for a set top box and click Next. Just as we did with the Digital tuner, select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Now we’re finished with the setup. Click Close. Accessing your Media Remotely Media files are accessed through a web-based interface. Before we go any further, however, we’ll need to confirm our username and password. Check your inbox for an email from Orb Networks. Click the enclosed confirmation link. You’ll be prompted to enter the username and password you selected in your browser then click Next.   Your account will be confirmed. Now, we’re ready to enjoy our media remotely. To get started, point your browser to the MyCast website from your remote computer. (See link below) Enter your credentials and click Log In. Once logged in, you’ll be presented with the MyCast Home screen. By default you’ll see a handful of “channels” such as a TV program guide, random audio and photos, video favorites, and weather. You can add, remove, or customize channels. To add additional channels, click on Add Channels at the top right…   …and select from the dropdown list. To access your full media libraries, click Open Application at the top left and select from one of the options. Live and Recorded TV If you have a TV tuner card you configured for Orb, you’ll see your program guide on the TV / Webcams screen. To watch or record a show, click on the program listing to bring up a detail box. Then click the red button to record, or the green button to play. When recording a show, you’ll see a pulsating red icon at the top right of the listing in the program guide. If you want to watch Live TV, you may be prompted to choose your media player, depending on your browser and settings. Playback should begin shortly.   Note for Windows Media Center Users If you try to stream live TV in Orb while Windows Media Center is running on your PC, you’ll get an error message. Click the Stop MediaCenter button and then try again.   Audio On the Audio screen, you’ll find your music files indexed by genre, artist, and album. You can play a selection by clicking once and then clicking the green play button, or by simply double-clicking.   Playback will begin in the default media player for the streaming format.   Video Video works essentially the same as audio. Click on a selection and press the green play button, or double-click on the video title. Video playback will begin in the default media player for the streaming format.   Streaming Formats You can change the default streaming format in the control panel settings. To access the Control Panel, click on Open Applications  and select Control Panel. You can also click Settings at the top right.   Select General from the drop down list and then click on the Streaming Formats tab. You are provided four options. Flash, Windows Media, .SDP, and .PLS.   Creating Playlists To create playlists, drag and drop your media title to the playlist work area on the right, or click Add to playlist on the top menu. Click Save when finished.    Sharing your Media Orb allows you to share media playlists across the Internet with friends and family. There are a few ways to accomplish this. We’ll start by click the Share button at the bottom of the playlist work area after you’ve compiled your playlist. You’ll be prompted to choose a method by which to share your playlist. You’ll have the option to share your playlist publicly or privately. You can share publically through links, blogs, or on your Orb public profile.  By choosing the Public Profile option, Orb will automatically create a profile page for you with a URL like http://public.orb.com/username that anyone can easily access on the Internet. The private sharing option allows you to invite friends by email and requires recipients to register with Orb. You can also give your playlist a custom name, or accept the auto-generated title. Click OK when finished. Users who visit your public profile will be able to view and stream any of your shared playlists to their computer or supported device.   Portable Media Devices and Smartphones Orb can stream media to many portable devices and 3G phones. Streaming audio is supported on the iPhone and iPod Touch through the Safari browser. However, video and live TV streaming requires the Orb Live iPhone App.  Orb Live is available in the App store for $9.99. To stream media to your portable device, go to the MyCast website in your mobile browser and login. Browse for your media or playlist. Make a selection and play the media. Playback will begin. We found streaming music to both the Droid and the iPhone to work quite nicely. Video playback on the Droid, however, left a bit to be desired. The video looked good, but the audio tended to be out of sync. System Tray Control Panel By default Orb runs in the system tray on start up. To access the System Tray Control Panel, right-click on the Orb icon in the system tray and select Control Panel. Login with your Orb username and  password and click OK.   From here you can add or remove media sources, add manage accounts, change your password, and more. If you’d rather not run Orb on Startup, click the General icon.   Unselect the checkbox next to Start Orb when the system starts. Conclusion It may seem like a lot of steps, but getting Orb up and running isn’t terribly difficult. Orb is available for both Windows and Intel based Macs. It also supports streaming to many Game Consoles such as the Wii, PS3, and XBox 360. If you are running Windows 7 on multiple computers, you may want to check out our write-up on how to stream music and video over the Internet with Windows Media Player 12. Downloads Download Orb Logon to MyCast Similar Articles Productive Geek Tips Stream Music and Video Over the Internet with Windows Media Player 12Enable Media Streaming in Windows Home Server to Windows Media PlayerStream Media from Windows 7 to XP with VLC Media PlayerShare Digital Media With Other Computers on a Home Network with Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

  Read the article

• What Gets Measured Gets Managed

  - by steve.diamond

  OK, so if I were to claim credit for inventing that expression, I guess I could share the mantle with Al Gore, creator of the Internet. But here's the point: How many of us acquire CRM systems without specifically benchmarking several key performance indicators across sales, marketing and service BEFORE and AFTER deployment of said system? Yes, this may sound obvious and it might provoke the, "Well of course, Diamond!" response, but is YOUR company doing this? Can you define in quantitative terms the delta across multiple parameters? I just trolled the Web site of one of my favorite sales consultancy firms, The Alexander Group. Right on their home page is a brief appeal citing the importance of benchmarking. The corresponding landing page states, "The fact that hundreds of sales executives now track how their sales forces spend time means they attach great value to understanding how much time sellers actually devote to selling." The opportunity is to extend this conversation to benchmarking the success that companies derive from the investment they make in CRM systems, i.e., to the automation side of the equation. To a certain extent, the 'game' is analogous to achieving optimal physical fitness. One may never quite get there, but beyond the 95% threshold of "excellence," she/he may be entering the realm of splitting infinitives. But at the very start, and to quote verbiage from the aforementioned Alexander Group Web page, what gets measured gets managed. And getting to that 95% level along several key indicators would be a high quality problem indeed, don't you think? Yes, this could be a "That's so 90's" conversation, but is it really?

  Read the article

• Artemis Is The Absolute Geekiest LAN Game You’ll Ever Play [Video]

  - by Jason Fitzpatrick

  Prepare to have your sense of what really geeky computer gaming look like with this Star Trek-like mockup that involves a projector, multiple monitors, and a crew of six. If you have five friends willing to pool some resources–because let us tell you, it’s not going to be cheap to build this gaming setup from scratch–you’re on your way to building a functional starship bridge in your rec room. You’ll need six computers and monitors, a projector to create the front-of-the-bridge-room effect, and a copy of the game–the full retail game is $40 but there is a free demo so you can take the starship simulation for a test spin. The base game is focused on simple simulations like defending your space station and fighting off waves of invaders, however, a recent update of the game supports user-created mission packs. The missions packs allow fans of the game to create intricate missions with objectives to expand the game much like fan-created RPG modules add game play value to table top role-playing games. Hit up the link below to read more about the game or just sit back and enjoy the entertaining video above of sci-fi bloggers manning a starship. Artemis HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How What Are the Windows A: and B: Drives Used For?

  Read the article

• Convert a Row to a Column in Excel the Easy Way

  - by Matthew Guay

  Sometimes we’ve entered data in a column in Excel, only to realize later that it would be better to have this data in a row, or vise-versa.  Here’s a simple trick to convert any row or set of rows into a column, or vise-versa, in Excel. Please Note: This is tested in Excel 2003, 2007, and 2010.  Here we took screenshots from Excel 2010 x64, but it works the same on the other versions. Convert a Row to a Column Here’s our data in Excel: We want to change these two columns into rows.  Select all the cells you wish to convert, right-click, and select copy (or simply press Ctrl+C): Now, right-click in the cell where you want to put the data in rows, and select “Paste Special…”   Check the box at the bottom that says “Transpose”, and then click OK. Now your data that was in columns is in rows! This works the exact same for converting rows into columns.  Here’s some data in rows:   After copying and pasting special with Transpose selected, here’s the data in columns! This is a great way to get your data organized just like you want in Excel. Similar Articles Productive Geek Tips Convert Older Excel Documents to Excel 2007 FormatHow To Import a CSV File Containing a Column With a Leading 0 Into ExcelExport an Access 2003 Report Into Excel SpreadsheetMake Row Labels In Excel 2007 Freeze For Easier ReadingKeyboard Ninja: Insert Tables in Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs The Wearing of the Green – St. Patrick’s Day Theme (Firefox)

  Read the article

• Framework 4 Features: Support for Timed Jobs

  - by Anthony Shorten

  One of the new features of the Oracle Utilities Application Framework V4 is the ability for the batch framework to support Timed Batch. Traditionally batch is associated with set processing in the background in a fixed time frame. For example, billing customers. Over the last few versions their has been functionality required by the products required a more monitoring style batch process. The monitor is a batch process that looks for specific business events based upon record status or other pieces of data. For example, the framework contains a fact monitor (F1-FCTRN) that can be configured to look for specific status's or other conditions. The batch process then uses the instructions on the object to determine what to do. To support monitor style processing, you need to run the process regularly a number of times a day (for example, every ten minutes). Traditional batch could support this but it was not as optimal as expected (if you are a site using the old Workflow subsystem, you understand what I mean). The Batch framework was extended to add additional facilities to support times (and continuous batch which is another new feature for another blog entry). The new facilities include: The batch control now defines the job as Timed or Not Timed. Non-Timed batch are traditional batch jobs. The timer interval (the interval between executions) can be specified The timer can be made active or inactive. Only active timers are executed. Setting the Timer Active to inactive will stop the job at the next time interval. Setting the Timer Active to Active will start the execution of the timed job. You can specify the credentials, language to view the messages and an email address to send the a summary of the execution to. The email address is optional and requires an email server to be specified in the relevant feature configuration. You can specify the thread limits and commit intervals to be sued for the multiple executions. Once a timer job is defined it will be executed automatically by the Business Application Server process if the DEFAULT threadpool is active. This threadpool can be started using the online batch daemon (for non-production) or externally using the threadpoolworker utility. At that time any batch process with the Timer Active set to Active and Batch Control Type of Timed will begin executing. As Timed jobs are executed automatically then they do not appear in any external schedule or are managed by an external scheduler (except via the DEFAULT threadpool itself of course). Now, if the job has no work to do as the timer interval is being reached then that instance of the job is stopped and the next instance started at the timer interval. If there is still work to complete when the interval interval is reached, the instance will continue processing till the work is complete, then the instance will be stopped and the next instance scheduled for the next timer interval. One of the key ways of optimizing this processing is to set the timer interval correctly for the expected workload. This is an interesting new feature of the batch framework and we anticipate it will come in handy for specific business situations with the monitor processes.

  Read the article

• FileNameColumnName property, Flat File Source Adapter : SSIS Nugget

  - by jamiet

  I saw a question on MSDN’s SSIS forum the other day that went something like this: I’m loading data into a table from a flat file but I want to be able to store the name of that file as well. Is there a way of doing that? I don’t want to come across as disrespecting those who took the time to reply but there was a few answers along the lines of “loop over the files using a For Each, store the file name in a variable yadda yadda yadda” when in fact there is a much much simpler way of accomplishing this; it just happens to be a little hidden away as I shall now explain! The Flat File Source Adapter has a property called FileNameColumnName which for some reason it isn’t exposed through the Flat File Source editor, it is however exposed via the Advanced Properties: You’ll see in the screenshot above that I have set FileNameColumnName=“Filename” (it doesn’t matter what name you use, anything except a non-zero string will work). What this will do is create a new column in our dataflow called “Filename” that contains, unsurprisingly, the name of the file from which the row was sourced. All very simple. This is particularly useful if you are extracting data from multiple files using the MultiFlatFile Connection Manager as it allows you to differentiate between data from each of the files as you can see in the following screenshot: So there you have it, the FileNameColumnName property; a little known secret of SSIS. I hope it proves to be useful to someone out there. @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• #twitter for Windows Phone 7 protips (#wp7)

  - by Laurent Bugnion

  I started tweeting a list of “protips” (or whatever you want to call that) related to the Twitter for Windows Phone 7 application. Since I worked as integrator on this app, my tasks involved integrating design assets in all screens, and so I had an insider view on all the screens (and that is really a LOT of screens :) Seeing some comments about the app made me understand that most users out there don’t realize how rich the application is, and how many features are available. So without further ado, here we go, a list of Twitter for WP7 protips: (note: I will extend the list if I think of new stuff, and maybe add some screenshots later). Check the dark theme in the application settings! Select a tweet, menu, Translate. Search, Nearby looks for tweets near you Custom searches can be saved. They synch up with web twitter too! Multi language support, independant from OS. supports EN, FR, DE, IT, ES Multiple accounts are supported, simply define them in the Settings Even without a Twitter account, experience is super rich. Trends, Suggested, Nearby, searches etc... Select a tweet, then press Replies To to see the whole conversation Compose, menu, Hashtags. Enter a hashtag and press Add. List is saved for the next time. Select a tweet with location info (like my own). Press the location name to see all Nearby tweets Want to remove location information just for one tweet? Press on the Places button in app bar then Clear Place Settings, General to toggle between Username/Fullname display, Relative/Absolute date/time and more Upload a picture directly from compose screen to TwitPic, yFrog or TweetPhoto (service selection in Settings) Settings, About, Support to see a log of app errors and email it to support (use wisely please) Tap your username to see your profile. Then Menu, Edit Profile to edit your info, including your picture Tap on any user's name to see his profile, tweets, mentions and favorites in a Pivot Happy Tweeting! Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Translating with Google Translate without API and C# Code

  - by Rick Strahl

  Some time back I created a data base driven ASP.NET Resource Provider along with some tools that make it easy to edit ASP.NET resources interactively in a Web application. One of the small helper features of the interactive resource admin tool is the ability to do simple translations using both Google Translate and Babelfish. Here's what this looks like in the resource administration form: When a resource is displayed, the user can click a Translate button and it will show the current resource text and then lets you set the source and target languages to translate. The Go button fires the translation for both Google and Babelfish and displays them - pressing use then changes the language of the resource to the target language and sets the resource value to the newly translated value. It's a nice and quick way to get a quick translation going. Ch… Ch… Changes Originally, both implementations basically did some screen scraping of the interactive Web sites and retrieved translated text out of result HTML. Screen scraping is always kind of an iffy proposition as content can be changed easily, but surprisingly that code worked for many years without fail. Recently however, Google at least changed their input pages to use AJAX callbacks and the page updates no longer worked the same way. End result: The Google translate code was broken. Now, Google does have an official API that you can access, but the API is being deprecated and you actually need to have an API key. Since I have public samples that people can download the API key is an issue if I want people to have the samples work out of the box - the only way I could even do this is by sharing my API key (not allowed).   However, after a bit of spelunking and playing around with the public site however I found that Google's interactive translate page actually makes callbacks using plain public access without an API key. By intercepting some of those AJAX calls and calling them directly from code I was able to get translation back up and working with minimal fuss, by parsing out the JSON these AJAX calls return. I don't think this particular Warning: This is hacky code, but after a fair bit of testing I found this to work very well with all sorts of languages and accented and escaped text etc. as long as you stick to small blocks of translated text. I thought I'd share it in case anybody else had been relying on a screen scraping mechanism like I did and needed a non-API based replacement. Here's the code: /// <summary> /// Translates a string into another language using Google's translate API JSON calls. /// <seealso>Class TranslationServices</seealso> /// </summary> /// <param name="Text">Text to translate. Should be a single word or sentence.</param> /// <param name="FromCulture"> /// Two letter culture (en of en-us, fr of fr-ca, de of de-ch) /// </param> /// <param name="ToCulture"> /// Two letter culture (as for FromCulture) /// </param> public string TranslateGoogle(string text, string fromCulture, string toCulture) { fromCulture = fromCulture.ToLower(); toCulture = toCulture.ToLower(); // normalize the culture in case something like en-us was passed // retrieve only en since Google doesn't support sub-locales string[] tokens = fromCulture.Split('-'); if (tokens.Length > 1) fromCulture = tokens[0]; // normalize ToCulture tokens = toCulture.Split('-'); if (tokens.Length > 1) toCulture = tokens[0]; string url = string.Format(@"http://translate.google.com/translate_a/t?client=j&text={0}&hl=en&sl={1}&tl={2}", HttpUtility.UrlEncode(text),fromCulture,toCulture); // Retrieve Translation with HTTP GET call string html = null; try { WebClient web = new WebClient(); // MUST add a known browser user agent or else response encoding doen't return UTF-8 (WTF Google?) web.Headers.Add(HttpRequestHeader.UserAgent, "Mozilla/5.0"); web.Headers.Add(HttpRequestHeader.AcceptCharset, "UTF-8"); // Make sure we have response encoding to UTF-8 web.Encoding = Encoding.UTF8; html = web.DownloadString(url); } catch (Exception ex) { this.ErrorMessage = Westwind.Globalization.Resources.Resources.ConnectionFailed + ": " + ex.GetBaseException().Message; return null; } // Extract out trans":"...[Extracted]...","from the JSON string string result = Regex.Match(html, "trans\":(\".*?\"),\"", RegexOptions.IgnoreCase).Groups[1].Value; if (string.IsNullOrEmpty(result)) { this.ErrorMessage = Westwind.Globalization.Resources.Resources.InvalidSearchResult; return null; } //return WebUtils.DecodeJsString(result); // Result is a JavaScript string so we need to deserialize it properly JavaScriptSerializer ser = new JavaScriptSerializer(); return ser.Deserialize(result, typeof(string)) as string; } To use the code is straightforward enough - simply provide a string to translate and a pair of two letter source and target languages: string result = service.TranslateGoogle("Life is great and one is spoiled when it goes on and on and on", "en", "de"); TestContext.WriteLine(result); How it works The code to translate is fairly straightforward. It basically uses the URL I snagged from the Google Translate Web Page slightly changed to return a JSON result (&client=j) instead of the funky nested PHP style JSON array that the default returns. The JSON result returned looks like this: {"sentences":[{"trans":"Das Leben ist großartig und man wird verwöhnt, wenn es weiter und weiter und weiter geht","orig":"Life is great and one is spoiled when it goes on and on and on","translit":"","src_translit":""}],"src":"en","server_time":24} I use WebClient to make an HTTP GET call to retrieve the JSON data and strip out part of the full JSON response that contains the actual translated text. Since this is a JSON response I need to deserialize the JSON string in case it's encoded (for upper/lower ASCII chars or quotes etc.). Couple of odd things to note in this code: First note that a valid user agent string must be passed (or at least one starting with a common browser identification - I use Mozilla/5.0). Without this Google doesn't encode the result with UTF-8, but instead uses a ISO encoding that .NET can't easily decode. Google seems to ignore the character set header and use the user agent instead which is - odd to say the least. The other is that the code returns a full JSON response. Rather than use the full response and decode it into a custom type that matches Google's result object, I just strip out the translated text. Yeah I know that's hacky but avoids an extra type and firing up the JavaScript deserializer. My internal version uses a small DecodeJsString() method to decode Javascript without the overhead of a full JSON parser. It's obviously not rocket science but as mentioned above what's nice about it is that it works without an Google API key. I can't vouch on how many translates you can do before there are cut offs but in my limited testing running a few stress tests on a Web server under load I didn't run into any problems. Limitations There are some restrictions with this: It only works on single words or single sentences - multiple sentences (delimited by .) are cut off at the ".". There is also a length limitation which appears to happen at around 220 characters or so. While that may not sound  like much for typical word or phrase translations this this is plenty of length. Use with a grain of salt - Google seems to be trying to limit their exposure to usage of the Translate APIs so this code might break in the future, but for now at least it works. FWIW, I also found that Google's translation is not as good as Babelfish, especially for contextual content like sentences. Google is faster, but Babelfish tends to give better translations. This is why in my translation tool I show both Google and Babelfish values retrieved. You can check out the code for this in the West Wind West Wind Web Toolkit's TranslationService.cs file which contains both the Google and Babelfish translation code pieces. Ironically the Babelfish code has been working forever using screen scraping and continues to work just fine today. I think it's a good idea to have multiple translation providers in case one is down or changes its format, hence the dual display in my translation form above. I hope this has been helpful to some of you - I've actually had many small uses for this code in a number of applications and it's sweet to have a simple routine that performs these operations for me easily. Resources Live Localization Sample Localization Resource Provider Administration form that includes options to translate text using Google and Babelfish interactively. TranslationService.cs The full source code in the West Wind West Wind Web Toolkit's Globalization library that contains the translation code. © Rick Strahl, West Wind Technologies, 2005-2011Posted in CSharp  HTTP   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Windows 7 Not Recognizing Any Hardware, Linux Recognizing Hardware

  - by Newb

  I have a new desktop computer with two SSDs: one running Linux Mint 15 (SSD1), the other running Windows 7 (SSD2). My mint runs perfectly - USB wireless adapter is recognized, SSD2 (connected by SATA) is recognized and accessible through the filesystem, Ethernet works, etc. However, my Windows 7 is not recognizing any of these devices - even plugging in a regular ethernet cable doesn't work. It seems that it's not recognizing any network adapters, and it also doesn't recognize SSD1, connected to the mainboard by SATA. I've installed, uninstalled, and reinstalled Windows multiple times, but the problem persists. I used the Windows 7 CD to install Windows on a machine previously, and that time around, I didn't have any problems, which leads me to suspect that this might be a hardware issue, specifically with the mainboard. My mainboard is an MSI-7641 model, the 760GM-P34 FX. It uses an AMD Chipset and an AMD processor. Can anyone suggest what might be wrong, and how to fix it?

  Read the article

• SQL SERVER – 2 T-SQL Puzzles and Win USD 50 worth Amazon Gift Card and 25 Other Prizes

  - by pinaldave

  We all love brain teasers and interesting puzzles. Today I decided to come up with 2 interesting puzzles and winner of the contest will get USD 50 worth Amazon Gift Card. The puzzles are sponsored by NuoDB. Additionally, The first 25 individuals who download NuoDB Beta 8 by midnight Friday, Sept. 21 (EST) will automatically receive a $10 Amazon gift card. Puzzle 1: Why following code when executed in SSMS displays result as a * (Star)? SELECT CAST(634 AS VARCHAR(2)) Puzzle 2: Write the shortest code that produces results as 1 without using any numbers in the select statement. Bonus Q: How many different Operating System (OS) NuoDB support? Click here HINT If you can solve above puzzles you will be eligible for winning USD 50 Amazon Gift Card. However, you can always enroll yourself for following Bonus Prizes where if you have good chance of winning USD 10 Amazon Gift Card (if you are first 25 individual in specific time). Bonus Prizes: The first 25 individuals who download NuoDB Beta 8 by midnight Friday, Sept. 21 (EST) will automatically receive a $10 Amazon gift card. Rules: Please leave an answer in the comments section below. You can resubmit your answer multiple times, the latest entry will be considered valid. The winner will be announced on 1st October. Last day to participate in the puzzle is September 28th, 2012. All valid answer will be kept hidden till September 28th, 2012. Only One Winner will get USD 50 worth Amazon Gift Card. The first 25 individuals who download NuoDB Beta 8 by midnight Friday, Sept. 21 (EST) will automatically receive a $10 Amazon gift card. The winner will be selected using random algorithm. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology Tagged: NuoDB

  Read the article

• More FlipBoard Magazines: Azure, XAML, ASP.NET MVC & Web API

  - by dwahlin

  In a previous post I introduced two new FlipBoard magazines that I put together including The AngularJS Magazine and The JavaScript & HTML5 Magazine. FlipBoard magazines provide a great way to keep content organized using a magazine-style format as opposed to trudging through multiple unorganized bookmarks or boring pages full of links. I think they’re really fun to read through as well. Based on feedback and the surprising popularity of the first two magazines I’ve decided to create some additional magazines on topics I like such as The Azure Magazine, The XAML Magazine and The ASP.NET MVC & Web API Magazine. Click on a cover below to get to the magazines using your browser. To subscribe to a given magazine you’ll need to create a FlipBoard account (not required to read the magazines though) which requires an iOS or Android device (the Windows Phone 8 app is coming soon they say). If you have a post or article that you think would be a good fit for any of the magazines please tweet the link to @DanWahlin and I’ll add it to my queue to review. I plan to be pretty strict about keeping articles “on topic” and focused.   The Azure Magazine   The XAML Magazine   The ASP.NET MVC & Web API Magazine   The AngularJS Magazine   The JavaScript & HTML5 Magazine

  Read the article

• Data Quality and Master Data Management Resources

  - by Dejan Sarka

  Many companies or organizations do regular data cleansing. When you cleanse the data, the data quality goes up to some higher level. The data quality level is determined by the amount of work invested in the cleansing. As time passes, the data quality deteriorates, and you need to repeat the cleansing process. If you spend an equal amount of effort as you did with the previous cleansing, you can expect the same level of data quality as you had after the previous cleansing. And then the data quality deteriorates over time again, and the cleansing process starts over and over again. The idea of Data Quality Services is to mitigate the cleansing process. While the amount of time you need to spend on cleansing decreases, you will achieve higher and higher levels of data quality. While cleansing, you learn what types of errors to expect, discover error patterns, find domains of correct values, etc. You don’t throw away this knowledge. You store it and use it to find and correct the same issues automatically during your next cleansing process. The following figure shows this graphically. The idea of master data management, which you can perform with Master Data Services (MDS), is to prevent data quality from deteriorating. Once you reach a particular quality level, the MDS application—together with the defined policies, people, and master data management processes—allow you to maintain this level permanently. This idea is shown in the following picture. OK, now you know what DQS and MDS are about. You can imagine the importance on maintaining the data quality. Here are some resources that help you preparing and executing the data quality (DQ) and master data management (MDM) activities. Books Dejan Sarka and Davide Mauri: Data Quality and Master Data Management with Microsoft SQL Server 2008 R2 – a general introduction to MDM, MDS, and data profiling. Matching explained in depth. Dejan Sarka, Matija Lah and Grega Jerkic: MCTS Self-Paced Training Kit (Exam 70-463): Building Data Warehouses with Microsoft SQL Server 2012 – I wrote quite a few chapters about DQ and MDM, and introduced also SQL Server 2012 DQS. Thomas Redman: Data Quality: The Field Guide – you should start with this book. Thomas Redman is the father of DQ and MDM. Tyler Graham: Microsoft SQL Server 2012 Master Data Services – MDS in depth from a product team mate. Arkady Maydanchik: Data Quality Assessment – data profiling in depth. Tamraparni Dasu, Theodore Johnson: Exploratory Data Mining and Data Cleaning – advanced data profiling with data mining. Forthcoming presentations I am presenting a DQS and MDM seminar at PASS SQL Rally Amsterdam 2013: Wednesday, November 6th, 2013: Enterprise Information Management with SQL Server 2012 – a good kick start to your first DQ and / or MDM project. Courses Data Quality and Master Data Management with SQL Server 2012 – I wrote a 2-day course for SolidQ. If you are interested in this course, which I could also deliver in a shorter seminar way, you can contact your closes SolidQ subsidiary, or, of course, me directly on addresses [email protected] or [email protected]. This course could also complement the existing courseware portfolio of training providers, which are welcome to contact me as well. Start improving the quality of your data now!

  Read the article

• Error: "failed to connect to wpa_supplicant - wpa_ctrl_open no such file or directory" using netcfg with wpa_supplicant

  - by user1576628

  I'm trying to set up netcfg so that I can finish installing Arch Linux (using the instructions from the Beginners' Guide and netcfg) and I passed over what was meant to be a short step. Open wifi-menu, select network, enter password. After multiple attempts, I decided to edit the profile manually, which yielded no improvement. Eventually I decided to use netfcg with the more familiar wpa_supplicant. My /etc/wpa_supplicant.conf file is as follows: network={ ssid="my_ssid" #psk="my_wireless_passcode" psk="my_wireless_passcode_hex" } (Replacing generic names with my actual ssid and psk.) And my /etc/network.d/wpa_suppl file reads: CONNECTION='wireless' DESCRIPTION='A wpa_supplicant configuration based wireless connection' INTERFACE='wlan0' SECURITY='wpa-config' WPA_CONF='/etc/wpa_supplicant.conf' IP='dhcp' My ssid is not hidden, wlan0 is the proper interface, and wpa_supplicant works fine on its own, but using netcfg wpa_suppl, it returns failed to connect to wpa_supplicant - wpa_ctrl_open no such file or directory about twelve times before finally telling me the authentication failed. What can I do to fix this?

  Read the article

• How to Configure Windows Machine to Allow File Sharing with DNS Alias

  - by Michael Ferrante

  I have not seen a single article posted anywhere online that brings together all the settings one would need to do to make this work properly on Windows, so I thought I would post it here. To facilitate failover schemes, a common technique is to use DNS CNAME records (DNS Aliases) for different machine roles. Then instead of changing the Windows computername of the actual machine name, one can switch a DNS record to point to a new host. This can work on Microsoft Windows machines, but to make it work with file sharing the following configuration steps need to be taken. Outline The Problem The Solution Allowing other machines to use filesharing via the DNS Alias (DisableStrictNameChecking) Allowing server machine to use filesharing with itself via the DNS Alias (BackConnectionHostNames) Providing browse capabilities for multiple NetBIOS names (OptionalNames) Register the Kerberos service principal names (SPNs) for other Windows functions like Printing (setspn) References 1. The Problem On Windows machines, file sharing can work via the computer name, with or without full qualification, or by the IP Address. By default, however, filesharing will not work with arbitrary DNS aliases. To enable filesharing and other Windows services to work with DNS aliases, you must make registry changes as detailed below and reboot the machine. 2. The Solution Allowing other machines to use filesharing via the DNS Alias (DisableStrictNameChecking) This change alone will allow other machines on the network to connect to the machine using any arbitrary hostname. (However this change will not allow a machine to connect to itself via a hostname, see BackConnectionHostNames below). Edit the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters and add a value DisableStrictNameChecking of type DWORD set to 1. Allowing server machine to use filesharing with itself via the DNS Alias (BackConnectionHostNames) This change is necessary for a DNS alias to work with filesharing from a machine to find itself. This creates the Local Security Authority host names that can be referenced in an NTLM authentication request. To do this, follow these steps for all the nodes on the client computer: To the registry subkey HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0, add new Multi-String Value BackConnectionHostNames In the Value data box, type the CNAME or the DNS alias, that is used for the local shares on the computer, and then click OK. Note: Type each host name on a separate line. Providing browse capabilities for multiple NetBIOS names (OptionalNames) Allows ability to see the network alias in the network browse list. Edit the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters and add a value OptionalNames of type Multi-String Add in a newline delimited list of names that should be registered under the NetBIOS browse entries Names should match NetBIOS conventions (i.e. not FQDN, just hostname) Register the Kerberos service principal names (SPNs) for other Windows functions like Printing (setspn) NOTE: Should not need to do this for basic functions to work, documented here for completeness. We had one situation in which the DNS alias was not working because there was an old SPN record interfering, so if other steps aren't working check if there are any stray SPN records. You must register the Kerberos service principal names (SPNs), the host name, and the fully-qualified domain name (FQDN) for all the new DNS alias (CNAME) records. If you do not do this, a Kerberos ticket request for a DNS alias (CNAME) record may fail and return the error code KDC_ERR_S_SPRINCIPAL_UNKNOWN. To view the Kerberos SPNs for the new DNS alias records, use the Setspn command-line tool (setspn.exe). The Setspn tool is included in Windows Server 2003 Support Tools. You can install Windows Server 2003 Support Tools from the Support\Tools folder of the Windows Server 2003 startup disk. How to use the tool to list all records for a computername: setspn -L computername To register the SPN for the DNS alias (CNAME) records, use the Setspn tool with the following syntax: setspn -A host/your_ALIAS_name computername setspn -A host/your_ALIAS_name.company.com computername 3. References All the Microsoft references work via: http://support.microsoft.com/kb/ Connecting to SMB share on a Windows 2000-based computer or a Windows Server 2003-based computer may not work with an alias name Covers the basics of making file sharing work properly with DNS alias records from other computers to the server computer. KB281308 Error message when you try to access a server locally by using its FQDN or its CNAME alias after you install Windows Server 2003 Service Pack 1: "Access denied" or "No network provider accepted the given network path" Covers how to make the DNS alias work with file sharing from the file server itself. KB926642 How to consolidate print servers by using DNS alias (CNAME) records in Windows Server 2003 and in Windows 2000 Server Covers more complex scenarios in which records in Active Directory may need to be updated for certain services to work properly and for browsing for such services to work properly, how to register the Kerberos service principal names (SPNs). KB870911 Distributed File System update to support consolidation roots in Windows Server 2003 Covers even more complex scenarios with DFS (discusses OptionalNames). KB829885

  Read the article

• Oracle UPK Content Development Tool Settings

  - by [email protected]

  Oracle UPK Content Development tool settings: Before developing UPK content, your UPK Developer needs to be configured with certain standard settings to ensure the content will have a uniform look. To set the options: 1. Open the UPK Developer. 2. Click the Tools menu. 3. Click Options. After you configure the UPK Options, you can share these preferences with other content developers by exporting them to an .ops file. This is particularly useful in workgroup environments where multiple authors are working on the same content that requires consistent output regardless of who authored the content. (To learn more about Exporting/Importing Content Defaults refer to the Content Development.pdf guide that is delivered with the UPK Developer.) Here is a list of a few UPK Developer tool settings that Oracle UPK Content Developers use to develop UPK pre-built content: Screen resolution is set to 1024 x 768. See It mode frame delay is set to 5 seconds. Know It Required % is set to 70% and all three levels of remediation are selected. We opt to automatically record keyboard shortcuts. We use the default settings for the Bubble icon and Pointer position. Bubble color is yellow (Red = 255, Green = 255, Blue = 128). Bubble text is Verdana, Regular, 9 pt. ***Intro and end frame settings match the bubble settings Note: The Content Defaults String Input Settings will change based on which application (interface) you are recording against. For example here is a list of settings for different Oracle applications: • Agile - Microsoft Sans Serif, Regular, 8 • EBS - Microsoft Sans Serif, Regular, 10 • Hyperion - Microsoft Sans Serif, Regular, 8 • JDE E1 - Arial, Regular, 10 • PeopleSoft - Arial, Regular, 9 • Siebel - Arial, Regular, 8 Remember, it is recommended that you set the content defaults before you add documents and record content. When the content defaults are changed, existing documents are not affected and continue to use the defaults that were in effect when those documents were created. - Kathryn Lustenberger, Oracle UPK & Tutor Outbound Product Management

  Read the article

• Cisco ASA Hairpinning with Dynamic IP

  - by Joseph Sturtevant

  I currently have my Cisco ASA 5505 firewall configured to forward port 80 from the outside interface to a host on my dmz interface. I also need to allow clients on my inside interface to access the host in the dmz by entering the public ip / dns record in their browsers. I was able to do that by following the instructions here, resulting in the following configuration: static (dmz,outside) tcp interface www 192.168.1.5 www netmask 255.255.255.255 static (dmz,inside) tcp 74.125.45.100 www 192.168.1.5 www netmask 255.255.255.255 (Where 74.125.45.100 is my public IP and 192.168.1.5 is the IP of the dmz host) This works great except for the fact that my network has a dynamic public IP and this configuration will therefore break as soon as my public IP changes. Is there a way to do what I want with a dynamic ip? Note: Adding an internal DNS record won't solve my problem since I have multiple dmz hosts mapped to different ports on the public IP.

  Read the article

• Getting a Database into Source Control

  - by Grant Fritchey

  For any number of reasons, from simple auditing, to change tracking, to automated deployment, to integration with application development processes, you’re going to want to place your database into source control. Using Red Gate SQL Source Control this process is extremely simple. SQL Source Control works within your SQL Server Management Studio (SSMS) interface.  This means you can work with your databases in any way that you’re used to working with them. If you prefer scripts to using the GUI, not a problem. If you prefer using the GUI to having to learn T-SQL, again, that’s fine. After installing SQL Source Control, this is what you’ll see when you open SSMS:   SQL Source Control is now a direct piece of the SSMS environment. The key point initially is that I currently don’t have a database selected. You can even see that in the SQL Source Control window where it shows, in red, “No database selected – select a database in Object Explorer.” If I expand my Databases list in the Object Explorer, you’ll be able to immediately see which databases have been integrated with source control and which have not. There are visible differences between the databases as you can see here:   To add a database to source control, I first have to select it. For this example, I’m going to add the AdventureWorks2012 database to an instance of the SVN source control software (I’m using uberSVN). When I click on the AdventureWorks2012 database, the SQL Source Control screen changes:   I’m going to need to click on the “Link database to source control” text which will open up a window for connecting this database to the source control system of my choice.  You can pick from the default source control systems on the left, or define one of your own. I also have to provide the connection string for the location within the source control system where I’ll be storing my database code. I set these up in advance. You’ll need two. One for the main set of scripts and one for special scripts called Migrations that deal with different kinds of changes between versions of the code. Migrations help you solve problems like having to create or modify data in columns as part of a structural change. I’ll talk more about them another day. Finally, I have to determine if this is an isolated environment that I’m going to be the only one use, a dedicated database. Or, if I’m sharing the database in a shared environment with other developers, a shared database.  The main difference is, under a dedicated database, I will need to regularly get any changes that other developers have made from source control and integrate it into my database. While, under a shared database, all changes for all developers are made at the same time, which means you could commit other peoples work without proper testing. It all depends on the type of environment you work within. But, when it’s all set, it will look like this: SQL Source Control will compare the results between the empty folders in source control and the database, AdventureWorks2012. You’ll get a report showing exactly the list of differences and you can choose which ones will get checked into source control. Each of the database objects is scripted individually. You’ll be able to modify them later in the same way. Here’s the list of differences for my new database:   You can select/deselect all the objects or each object individually. You also get a report showing the differences between what’s in the database and what’s in source control. If there was already a database in source control, you’d only see changes to database objects rather than every single object. You can see that the database objects can be sorted by name, by type, or other choices. I’m going to add a comment such as “Initial creation of database in source control.” And then click on the Commit button which will put all the objects in my database into the source control system. That’s all it takes to get the objects into source control initially. Now is when things can get fun with breaking changes to code, automated deployments, unit testing and all the rest.

  Read the article

• The 50 Best Registry Hacks that Make Windows Better

  - by The Geek

  We’re big fans of hacking the Windows Registry around here, and we’ve got one of the biggest collections of registry hacks you’ll find. Don’t believe us? Here’s a list of the top 50 registry hacks that we’ve covered. It’s important to note that you should never hack the registry if you don’t know what you’re doing, because your computer will light on fire and some squirrels may be injured. Also, you should create a System Restore point before doing so. Otherwise, keep reading Latest Features How-To Geek ETC The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek Snowy Christmas House Personas Theme for Firefox The Mystic Underground Tunnel Wallpaper Ubunchu! – The Ubuntu Manga Available in Multiple Languages Breathe New Life into Your PlayStation 2 Peripherals by Hooking Them Up to Your Computer Move the Window Control Buttons to the Left Side in Windows Fun and Colorful Firefox Theme for Windows 7

  Read the article

• CodePlex Daily Summary for Tuesday, February 23, 2010

  CodePlex Daily Summary for Tuesday, February 23, 2010New Projects.NET Beginners: This project is a summary of project for first time developer and .net beginners. the aim is to provide tools and libraries to get startet with dev...A simple ASP.NET Currency / Money TextBox User Control: A ASP.NET TextBox control used with AJAX maskeditextender makes it possible to enter numbers but it's not very intuitive to use. CurrencyTextBox co...Academiki: Academik The project aims to be a university social network with content sharing and intellectual property. Academik makes it easier for students t...Acessando Campos com XPath Expression: Esse é um exemplo de como usar Xpath Expression na orchestration do Biztalk 2006. O Artigo do exemplo esta em www.biztalkbrasil.blogspot.comAg.CommandManager: A command manager implementation for Silverlights. Supports commanding to more or less any event using the ICommand interfaceApunta Notas: Apunta notas is just a note taking program that I created to learn WPF. Now you can write everything you need to remember or tell somebody. Or you...AzureKit: AzureKit provides a more direct approach to Azure's Table Service, which takes more advantage of the NoSQL nature of the storage medium.CRM 4.0 Distribute Workflow Activity: This plugin allows to execute a workflow for each entity that has a 1:N or N:N relationship to a given entity. For example: execute a workflow for...Dbg Shell: Dbg Shell replaces WinDbg for debugging dumps. All standard Dbg commands are supported. You can also write scripts in .Net assemblies to automated ...Egg Timer: Egg Timer is a very simple Windows Form application for setting short time-frame alarms.Enterprise Library Extensions: Extensions for the Microsoft Enterprise Library applications blocks which makes programming applications even easier.Event Calendar 2.0 Data Extractor: Really simple app to recover event calendar 2.0 information from iGoogle settings files and turn them into CSV format info for importing to other c...iTwiit: Silverlight Twitter Clientlibtym: Have your complete movie collection at a glance to manage all your movie files very comfortably!Metabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: The Metabolite Enterprise libraries are a set of C# Class Libraries developed for use with EPiServer 5 R2 SP2+ projects using PageTypeBuilder. They...Metro UX: Metro UXMTI: -Personal Expense Tracker: Personal Expense Tracker helps you track your expenses. I tried to find simple win forms expense tracker but found none interesting, so i made one...rarouš: repository for rarouš.weblog articlesSacDotNetUG: SacDotNetUG is an ASP.NET MVC 2 Web application intended for the Sacramento .NET user group. This project servers 2 main goals: to promote the adop...ShellLight: ShellLight is essentially a graphical shell for Silverlight applications that enables a quick auto-complete launcher for features in your solution.Sina Weibo(Microblog): sina weibo .NET libraries and applications.Terrain Independant Navigating Automaton v2.0: This is where members of the Robot Design Team from Stony Brook University come together and work on our unique TINA. This project is for a self-go...Url Rewrite.Net: Url Rewrite.Net is an open-source SEO project which contains Custom Http Module example and Custom Configrutaion Module.It is developed in C#.NET 2...WebPart and WebService Currency Converter: This is only a sample code how to get data from yahoo finance and how to implementing on Sharepoint WebPart or WebServices. This code it is freely...WPF AutoComplete TextBox Control: A AutoComplete TextBox Control written in WPF, Looks like the system built-in auto-completion(SHAutoComplete).ZWaveAPI: This project is aim to create an open class library on ZWave. It is based on article from digiWave.dk New Releases.NET Beginners: MathLab Visual Studio Project Template: First preview to a mathlab beginners library..NET Beginners: Turtle Visual Studio Project Template: The turtle engine is a very simlpe turtle which runs over a beach and leaves a track.A simple ASP.NET Currency / Money TextBox User Control: CurrencyTextBox Source v1.0: Source code with a test project.A simple ASP.NET Currency / Money TextBox User Control: CurrencyTextBox.dll: The User Control for use in projects.Acessando Campos com XPath Expression: Source Code SampleXPathExpression: O Source code contem o Projeto em Visual Studio 2005.Actipro WPF Controls Contrib: v2009.2 build 515: Minor tweaks and updated to target Actipro WPF Studio 2009.2 (build 515).Analysis Management System: 1.0.0.1 Update: Fix - Issue 4004 Nieuw - Beschikbare klanten kunnen nu bekeken worden via Extra/Aanvragers (Ctrl R)Apunta Notas: Apunta Notas 1.0 Release Candidate: There is the Release Candidate of Apunta Notas.ARSoft.Tools.Net - C# DNS and SPF Library: 1.2.0: Added asynchronous operations for DNS client.CRM 4.0 Distribute Workflow Activity: Beta: Initial release. Complete functionality, limited testing.Dbg Shell: First Public Release: First ReleaseDnDns and PocketDnDns - A .NET DNS Client Resolver Library: DnDns Library Release 2: A DNS protocol library written completely in managed code (C#). Supports common DNS records types like A, CNAME, MX, SRV, and more. Works on Window...Egg Timer: Egg Timer v1.0: Pretty simple application. Set the time directly or use the 5 minute and 1 hour increment/decrement buttons.EnhSim: EnhSim v1.9.7.2 BETA: 1.9.7.2 BETAImportant!: This beta version includes the changes to the Flame shock damage-over-time component which are currently on the PTR. Downlo...EnhSim: EnhSim v1.9.7.3 BETA: Important!: This beta version includes the changes to the Flame shock damage-over-time component which are currently on the PTR. Download 1.9.7.1 f...Esendex SMS SDK and Downloads for Microsoft.NET languages: Esendex .NET SDK v0.4.0: Features Messaging Service: Send a single SMS message and multiple SMS messages. Send a single Voice Message and multiple Voice Messages. Send...Event Calendar 2.0 Data Extractor: V1.0: First ever build of extractorExcelDna: ExcelDna Version 0.22: An important bugfix release that fixes a critical bug in the MultiThreaded marshaling support (under Excel 2007).InfoService: InfoService v1.5 Beta 8: InfoService Beta Release Please note this is a BETA. It should be stable, but i can't gurantee that! So use it on your own risk. Please read Plugi...Krypton Palette Selectors: Release 1.2: Adds the new KryptonPaletteContextMenu and refactors the KryptonPaletteDropButton to use it.kuuy static system: kss_v1.0beta: kuuy static sytem 1.0 beta editionlibtym: libtym: First public release version. Full functionality, tested. Please notify about bugs.mojoPortal: 2.3.3.9: see release notes on mojoPortal.com http://www.mojoportal.com/mojoportal-2339-released.aspx This release makes it easy to use Artisteer html templa...Net Tool: v1.01: User interface has been changedOpen NFSe: Open NFSe 0.1 (Salvador): Open NFSe 0.1 (Salvador)Paint.NET PSD Plugin: 1.0.7: Further substantial improvements in speed of both loading and saving. In particular, loading is about 5x as fast as in version 1.0.6. Saving is ...Project Starlight: 2.0: Release 2.0 final Changes: -Numerous stability fixes -Firefox 3.5 support -Safari 64 bit support (Snow Leopard) Mac and Windows Binaries are avai...RoTwee: RoTwee 5.0.0.1: This version fix for 16620Secure Data: Secure Data 2010.02.22.01: This version has been rewritten and contains many enhancements and I encourage anyone interested to download the source code and work through the Q...TreeSizeNet: TreeSizeNet 0.10.1: - Complete Redesign - Improved Stability - Improved Performance - PieChart for directory contentUrl Rewrite.Net: Beta V0.1 Release: Includes : -Custom Http Module -Custom Configuration Section Module ( in web.config) -Rewriting ModuleVCC: Latest build, v2.1.30222.0: Automatic drop of latest buildWebPart and WebService Currency Converter: CurrencyConverter.zip: CurrencyConverter.zip Have 3 Project on this files: 1. Library Project 2. Load Library Project Using Web Services 3. Load Library Project Using We...WSUS Smart Approve: 1.0.0.2: Fix: 25903ZuneConsole: ZuneConsole: Console GUI for the Zune Customs library, which should make everything work. This is what you should download.ZuneConsole: ZuneConsole How-To Manual: A quick (only 9 pages lol) tutorial on how to add custom artist info to your Zune.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETDotNetNuke® Community EditionImage Resizer Powertoy Clone for WindowsMicrosoft SQL Server Community & SamplesMost Active ProjectsDinnerNow.netRawrBlogEngine.NETNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSharpyInfoServicejQuery Library for SharePoint Web ServicesPHPExcelpatterns & practices – Enterprise LibrarySharePoint Contrib

  Read the article

• Pro BizTalk 2009

  - by Sean Feldman

  I have finished reading Pro BizTalk 2009 book from APress. This is a great book  if you’ve never dealt with BizTalk in the past and want to have a quick “on-ramp”. Although the book is very concerned about right way of building traditional BizTalk applications, it also dedicates a chapter to ESB Toolkit and does a good job in analyzing it. The fact that authors were concerned with subject such as coupling, hard-coding, automation, etc. makes it very interesting. One warning, if you are expecting to have a book that will guide you how to apply step by step examples, forget it. Nor this book does it, neither it’s possible due to multiple erratas found in it. I really was disappointed by the number of typos, inaccuracies, and technical mistakes. These kind of things turn readers away, especially when they had no experience with BT in the past. But this is the only bad thing about it. As for the rest – great content. Next week I am taking a deep dive course on BizTalk 2009. I really feel that this book has helped me a lot to get my feet wet. Next target will be ESB Tookit. To get to that, I will use what the book authors wrote “you have to understand how BizTalk as an engine works”.

  Read the article

• SysAdmin Career Question: Internal or Client Based

  - by Malnizzle

  ServerFault Community, It seems there are two positions SysAdmins find themselves in, either you are working for a non-IT services based single client (your employer) and providing in-house IT support or you work for a company who provides out sourced IT services to multiple clients. Right now I work for a company who does the latter, and I often consider how nice it would be doing the in-house side of things, to just have one network I am focused on and instead of feeling like I have a dozen bosses between clients and internal management, I would just have one set of management and people to appease. There is also the technical aspect of every client wanting something different, and having to manage numerous different technology platforms, or trying to force clients into using the technologies we prefer, neither situation is enjoyable. Is this just "the grass is greener on the other side" syndrome, or is there some legitimacy to the the stress of client based IT work compared to being an in-house IT guy? Thanks!

  Read the article

• Things to install on a new machine – revisited

  - by RoyOsherove

  as I prepare to get a new dev machine at work, I write the things I am going to install on it, before writing the first line of code on that machine: Control Freak Tools: Everything Search Engine – a free and amazingly fast search engine for files all over your machine. (just file names, not inside files). This is so fast I use it almost as a replacement for my start menu, but it’s also great for finding those files that get hidden and tucked away in dark places on my system. Ever had a situation where you needed to see exactly how many copies of X.dll were hiding on your machine and where? this tool is perfect for that. Google Chrome. It’s just fast. very fast. and Firefox has become the IE of alternative browsers in terms of speed and memory. Don’t even get me started on IE. TweetDeck – get a complete view of what’s up on twitter Total Commander – my still favorite file manager, over five years now. KatMouse – will scroll any window your hovering on, even if it’s not an active window, when you use scroll the wheel on it. PowerIso or Daemon Tools – for loading up ISO images of discs LogMeIn Ignition – quick access to your LogMeIn computers for online Backup: JungleDisk or BackBlaze KeePass – save important passwords MS Security Essentials – free anti virus that’s quoest and doesn’t make a mess of your system. for home: uTorrent – a torrent client that can read rss feeds (like the ones from ezrss.it ) Camtasia Studio and SnagIt – for recording and capturing the screen, and then adding cool effects on top. Foxit PDF Reader – much faster that adove reader. Toddler Keys (for home) – for when your baby wants to play with your keyboard. Live Writer – for writing blog posts for Lenovo ThinkPads – Lenovo System Update – if you have a “custom” system instead of the one that came built in, this will keep all your lenovo drivers up to date. FileZilla – for FTP stuff All the utils from sysinternals, (or try the live-links) especially: AutoRuns for deciding what’s really going to load at startup, procmon to see what’s really going on with processes in your system   Developer stuff: Reflector. Pure magic. Time saver. See source code of any compiled assembly. Resharper. Great for productivity and navigation across your source code FinalBuilder – a commercial build automation tool. Love it. much better than any xml based time hog out there. TeamCity – a great visual and friendly server to manage continuous integration. powerful features. Test Lint – a free addin for vs 2010 I helped create, that checks your unit tests for possible problems and hints you about it. TestDriven.NET – a great test runner for vs 2008 and 2010 with some powerful features. VisualSVN – a commercial tool if you use subversion. very reliable addin for vs 2008 and 2010 Beyond Compare – a powerful file and directory comparison tool. I love the fact that you can right click in windows exporer on any file and select “select left side to compare”, then right click on another file and select “compare with left side”. Great usability thought! PostSharp 2.0 – for addind system wide concepts into your code (tracing, exception management). Goes great hand in hand with.. SmartInspect – a powerful framework and viewer for tracing for your application. lots of hidden features. Crypto Obfuscator – a relatively new obfuscation tool for .NET that seems to do the job very well. Crypto Licensing – from the same company –finally a licensing solution that seems to really fit what I needed. And it works. Fiddler 2 – great for debugging and tracing http traffic to and from your app. Debugging Tools for Windows and DebugDiag  - great for debugging scenarios. still wanting more? I think this should keep you busy for a while.   Regulator and Regulazy – for testing and generating regular expressions Notepad 2 – for quick editing and viewing with syntax highlighting

  Read the article

• April 2013 Release of the Ajax Control Toolkit

  - by Stephen.Walther

  I’m excited to announce the April 2013 release of the Ajax Control Toolkit. For this release, we focused on improving two controls: the AjaxFileUpload and the MaskedEdit controls. You can download the latest release from CodePlex at http://AjaxControlToolkit.CodePlex.com or, better yet, you can execute the following NuGet command within Visual Studio 2010/2012: There are three builds of the Ajax Control Toolkit: .NET 3.5, .NET 4.0, and .NET 4.5. A Better AjaxFileUpload Control We completely rewrote the AjaxFileUpload control for this release. We had two primary goals. First, we wanted to support uploading really large files. In particular, we wanted to support uploading multi-gigabyte files such as video files or application files. Second, we wanted to support showing upload progress on as many browsers as possible. The previous version of the AjaxFileUpload could show upload progress when used with Google Chrome or Mozilla Firefox but not when used with Apple Safari or Microsoft Internet Explorer. The new version of the AjaxFileUpload control shows upload progress when used with any browser. Using the AjaxFileUpload Control Let me walk-through using the AjaxFileUpload in the most basic scenario. And then, in following sections, I can explain some of its more advanced features. Here’s how you can declare the AjaxFileUpload control in a page: <ajaxToolkit:ToolkitScriptManager runat="server" /> <ajaxToolkit:AjaxFileUpload ID="AjaxFileUpload1" AllowedFileTypes="mp4" OnUploadComplete="AjaxFileUpload1_UploadComplete" runat="server" /> The exact appearance of the AjaxFileUpload control depends on the features that a browser supports. In the case of Google Chrome, which supports drag-and-drop upload, here’s what the AjaxFileUpload looks like: Notice that the page above includes two Ajax Control Toolkit controls: the AjaxFileUpload and the ToolkitScriptManager control. You always need to include the ToolkitScriptManager with any page which uses Ajax Control Toolkit controls. The AjaxFileUpload control declared in the page above includes an event handler for its UploadComplete event. This event handler is declared in the code-behind page like this: protected void AjaxFileUpload1_UploadComplete(object sender, AjaxControlToolkit.AjaxFileUploadEventArgs e) { // Save uploaded file to App_Data folder AjaxFileUpload1.SaveAs(MapPath("~/App_Data/" + e.FileName)); } This method saves the uploaded file to your website’s App_Data folder. I’m assuming that you have an App_Data folder in your project – if you don’t have one then you need to create one or you will get an error. There is one more thing that you must do in order to get the AjaxFileUpload control to work. The AjaxFileUpload control relies on an HTTP Handler named AjaxFileUploadHandler.axd. You need to declare this handler in your application’s root web.config file like this: <configuration> <system.web> <compilation debug="true" targetFramework="4.5" /> <httpRuntime targetFramework="4.5" maxRequestLength="42949672" /> <httpHandlers> <add verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/> </httpHandlers> </system.web> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <handlers> <add name="AjaxFileUploadHandler" verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/> </handlers> <security> <requestFiltering> <requestLimits maxAllowedContentLength="4294967295"/> </requestFiltering> </security> </system.webServer> </configuration> Notice that the web.config file above also contains configuration settings for the maxRequestLength and maxAllowedContentLength. You need to assign large values to these configuration settings — as I did in the web.config file above — in order to accept large file uploads. Supporting Chunked File Uploads Because one of our primary goals with this release was support for large file uploads, we added support for client-side chunking. When you upload a file using a browser which fully supports the HTML5 File API — such as Google Chrome or Mozilla Firefox — then the file is uploaded in multiple chunks. You can see chunking in action by opening F12 Developer Tools in your browser and observing the Network tab: Notice that there is a crazy number of distinct post requests made (about 360 distinct requests for a 1 gigabyte file). Each post request looks like this: http://localhost:24338/AjaxFileUploadHandler.axd?contextKey={DA8BEDC8-B952-4d5d-8CC2-59FE922E2923}&fileId=B7CCE31C-6AB1-BB28-2940-49E0C9B81C64 &fileName=Sita_Sings_the_Blues_480p_2150kbps.mp4&chunked=true&firstChunk=false Each request posts another chunk of the file being uploaded. Notice that the request URL includes a chunked=true parameter which indicates that the browser is breaking the file being uploaded into multiple chunks. Showing Upload Progress on All Browsers The previous version of the AjaxFileUpload control could display upload progress only in the case of browsers which fully support the HTML5 File API. The new version of the AjaxFileUpload control can display upload progress in the case of all browsers. If a browser does not fully support the HTML5 File API then the browser polls the server every few seconds with an Ajax request to determine the percentage of the file that has been uploaded. This technique of displaying progress works with any browser which supports making Ajax requests. There is one catch. Be warned that this new feature only works with the .NET 4.0 and .NET 4.5 versions of the AjaxControlToolkit. To show upload progress, we are taking advantage of the new ASP.NET HttpRequest.GetBufferedInputStream() and HttpRequest.GetBufferlessInputStream() methods which are not supported by .NET 3.5. For example, here is what the Network tab looks like when you use the AjaxFileUpload with Microsoft Internet Explorer: Here’s what the requests in the Network tab look like: GET /WebForm1.aspx?contextKey={DA8BEDC8-B952-4d5d-8CC2-59FE922E2923}&poll=1&guid=9206FF94-76F9-B197-D1BC-EA9AD282806B HTTP/1.1 Notice that each request includes a poll=1 parameter. This parameter indicates that this is a polling request to get the size of the file buffered on the server. Here’s what the response body of a request looks like when about 20% of a file has been uploaded: Buffering to a Temporary File When you upload a file using the AjaxFileUpload control, the file upload is buffered to a temporary file located at Path.GetTempPath(). When you call the SaveAs() method, as we did in the sample page above, the temporary file is copied to a new file and then the temporary file is deleted. If you don’t call the SaveAs() method, then you must ensure that the temporary file gets deleted yourself. For example, if you want to save the file to a database then you will never call the SaveAs() method and you are responsible for deleting the file. The easiest way to delete the temporary file is to call the AjaxFileUploadEventArgs.DeleteTemporaryData() method in the UploadComplete handler: protected void AjaxFileUpload1_UploadComplete(object sender, AjaxControlToolkit.AjaxFileUploadEventArgs e) { // Save uploaded file to a database table e.DeleteTemporaryData(); } You also can call the static AjaxFileUpload.CleanAllTemporaryData() method to delete all temporary data and not only the temporary data related to the current file upload. For example, you might want to call this method on application start to ensure that all temporary data is removed whenever your application restarts. A Better MaskedEdit Extender This release of the Ajax Control Toolkit contains bug fixes for the top-voted issues related to the MaskedEdit control. We closed over 25 MaskedEdit issues. Here is a complete list of the issues addressed with this release: · 17302 MaskedEditExtender MaskType=Date, Mask=99/99/99 Undefined JS Error · 11758 MaskedEdit causes error in JScript when working with 2-digits year · 18810 Maskededitextender/validator Date validation issue · 23236 MaskEditValidator does not work with date input using format dd/mm/yyyy · 23042 Webkit based browsers (Safari, Chrome) and MaskedEditExtender · 26685 MaskedEditExtender@(ClearMaskOnLostFocus=false) adds a zero character when you each focused to target textbox · 16109 MaskedEditExtender: Negative amount, followed by decimal, sets value to positive · 11522 MaskEditExtender of AjaxtoolKit-1.0.10618.0 does not work properly for Hungarian Culture · 25988 MaskedEditExtender – CultureName (HU-hu) > DateSeparator · 23221 MaskedEditExtender date separator problem · 15233 Day and month swap in Dynamic user control · 15492 MaskedEditExtender with ClearMaskOnLostFocus and with MaskedEditValidator with ClientValidationFunction · 9389 MaskedEditValidator – when on no entry · 11392 MaskedEdit Number format messed up · 11819 MaskedEditExtender erases all values beyond first comma separtor · 13423 MaskedEdit(Extender/Validator) combo problem · 16111 MaskedEditValidator cannot validate date with DayMonthYear in UserDateFormat of MaskedEditExtender · 10901 MaskedEdit: The months and date fields swap values when you hit submit if UserDateFormat is set. · 15190 MaskedEditValidator can’t make use of MaskedEditExtender’s UserDateFormat property · 13898 MaskedEdit Extender with custom date type mask gives javascript error · 14692 MaskedEdit error in “yy/MM/dd” format. · 16186 MaskedEditExtender does not handle century properly in a date mask · 26456 MaskedEditBehavior. ConvFmtTime : function(input,loadFirst) fails if this._CultureAMPMPlaceholder == “” · 21474 Error on MaskedEditExtender working with number format · 23023 MaskedEditExtender’s ClearMaskOnLostFocus property causes problems for MaskedEditValidator when set to false · 13656 MaskedEditValidator Min/Max Date value issue Conclusion This latest release of the Ajax Control Toolkit required many hours of work by a team of talented developers. I want to thank the members of the Superexpert team for the long hours which they put into this release.

  Read the article

• Windows Mobile Signature Capture and Barcode Scanning

  - by cohortq

  Currently I have 7 Motorola MC75 Phones all running Windows Mobile 6.1 and using PTS Tracer Plus for signature capture and barcode scanning. After multiple returns with Motorola, and have verizon verify the data connections on all my phones in the field. I have found that PTS Tracer Plus 5, is the culprit in freezing and crashing before, during, and after signature collection. Does anyone know of another software package for Windows Mobile 6.1 that does signature capture and barcode scanning? I'm also going to try PTS Wireless 6 beta1 as well too, but I would like to know what other peopel are using successfully. Thanks!

  Read the article

< Previous Page | 576 577 578 579 580 581 582 583 584 585 586 587  | Next Page >