Search Results

Search found 20869 results on 835 pages for 'things i hate'.

Page 583/835 | < Previous Page | 579 580 581 582 583 584 585 586 587 588 589 590  | Next Page >

  • CPU and Motherboard clock speeds

    - by NZHammer
    I have been doing some reading about CPU clock speeds and how CPU clock speeds are calculated. After reading several articles, I have come to the understanding that your CPU clock speed is determined by: CPU clock speed = cpu multiplier x mobo clock speed A few questions came about after reading this which I cannot seem to find the answer to anywhere: If the CPU clock speed is dependent upon the mobo clock speed, then how is the clock speed of the CPU predetermined upon buying the CPU (i.e. written on the box without knowing what mobo is being used)? After installation, does the CPU adjust it's multiplier based upon the mobo clock speed to achieve advertised speeds? For example, if the CPU clocks speed is advertised at 2.4GHz and the mobo clock speed is 100MHz, will the multiplier be automatically set to 24x? Why does mobo clock speed seem to not be very important / talked about? For example, when I search on Newegg, mobo clock speed never seems to be listed. When I search enthusiast forums and overclocking forums, mobo clock speed is rarely mentioned. To me, it seems like the mobo clock speed would be pretty important. If I am understanding things correctly, a lower mobo clock speed means that you CPU must work harder to achieve advertised clock speeds. I guess that I should stop there with the questions for now, as I may be asking my questions based on incorrect assumptions. Thanks!

    Read the article

  • Apache 2.2 Present rss http 410 pages as application/rss+xml content type

    - by Mark Bakker
    I have a problem sending http-410 for very old rss feeds. Functional this can happen in one Very old rss feeds where content is not updated anymore / subject could not move to another feed Migration from 3th party site to our site where the rss feed is not longer functional supported I tried several things in my site config see below; <VirtualHost *:80> DocumentRoot /opt/tomcat/webapps/ROOT/ ErrorDocument 500 /error/static/error-500.html ErrorDocument 503 /error/static/error-500.html ErrorDocument 404 /error/static/rss/error-404.html ErrorDocument 410 /error/static/rss/error-410.html # When error pages need to be served by apache, # exclude the files to serve as below (in comment) SetEnvIf Request_URI "/error/static/*" no-jk # force all files to be image/gif: <Location *.rss> #<Location *> #ForceType application/rss+xml </Location> #AddType application/rss+xml .rss #AddType application/rss+xml .xml #AddType application/rss+xml .html JkMount /* rss;use_server_errors=402 # JkMount /* rss RewriteEngine on JkMount /news.rss rss JkMount /documenten-en-publicaties.rss rss RewriteEngine on RewriteRule ^/news.rss$ - [NC,T=application/rss+xml,G,L] RewriteRule ^/documenten-en-publicaties.rss$ - [NC,G,L] # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn ErrorLog "|/usr/bin/logger -s -p local3.err -t 'Apache'" CustomLog "|/usr/bin/logger -s -p local2.info -t 'Apache'" combined ServerSignature Off </VirtualHost> The desired end result should be on /news.rss and /documenten-en-publicaties.rss a 410 page with content in the error page with a content type 'application/rss+xml'

    Read the article

  • Basic IP address structure

    - by dannymcc
    We currently have a few servers, around 30-40 workstations and 16 phones. Each device has a static IP address. As an example the standard settings for a new workstation is; IP: 192.168.1.XXX Subnet: 255.255.255.0 Gateway: 192.168.1.99 DNS: 192.168.1.50 As I am slowly exploring new server OS's and virtualisation etc. I am getting close to wanting a wider range of IP addresses. What I would like to do is seperate the devices by IP as follows: Servers 192.168.1.XXX Workstations 192.168.2.XXX Printers 192.168.3.XXX Phones 192.168.4.XXX VM's 192.168.5.XXX Is this a bad idea, or is this a common way of doing things? My biggest concern is the phones and subnet masks. The phones are managed by our provider although I have access to the server that runs them. Would I need to change the subnet mask to 255.255.0.0 on all devices? Or only those that change? For example, the phones don't need to connect to any other devices other than other phones and the phone server. So if I have the phones on 192.168.1.XXX with a subnet mask of 255.255.255.0 and then moved everything I had complete ownership/control of to 192.168.X.XXX with a new subnet mask of 255.255.0.0. Would that work?

    Read the article

  • Node.js, Nginx and Varnish with WebSockets

    - by Joe S
    I'm in the process of architecting the backend of a new Node.js web app that i'd like to be pretty scalable, but not overkill. In all of my previous Node.js deployments, I have used Nginx to serve static assets such as JS/CSS and reverse proxy to Node (As i've heard Nginx does a much better job of this / express is not really production ready). However, Nginx does not support WebSockets. I am making extensive use of Socket.IO for the first time and discovered many articles detailing this limitation. Most of them suggest using Varnish to direct the WebSockets traffic directly to node, bypassing Nginx. This is my current setup: Varnish : Port 80 - Routing HTTP requests to Nginx and WebSockets directly to node Nginx : Port 8080 - Serving Static Assets like CSS/JS Node.js Express: Port 3000 - Serving the App, over HTTP + WebSockets However, there is now the added complexity that Varnish doesn't support HTTPS, which requires Stunnel or some other solution, it's also not load balanced yet (Perhaps i will use HAProxy or something). The complexity is stacking up! I would like to keep things simpler than this if possible. Is it still necessary to reverse proxy Node.js using Nginx when Varnish is also present? As even if express is slow at serving static files, they should theoretically be cached by Varnish. Or are there better ways to implement this?

    Read the article

  • Windows 7 Apache Crashes on ANY request

    - by Dan
    I have XAMPP installed. I am running Windows 7. I have WordPress installed so that I may tweak it and test things locally before putting them 'live' on a remote server. I just installed BuddyPress. The installation was rather seamless. I activated the plugin and almost immediately, Apache crashed. I have Apache running as a service so it immediately restarted itself and was running BUT if I even so much as refresh the page (or create any other request), down it goes. Listed here is the error report as generated by Windows 7: Problem signature: Problem Event Name: APPCRASH Application Name: apache.exe Application Version: 2.2.4.0 Application Timestamp: 45ebef86 Fault Module Name: ZendOptimizer.dll Fault Module Version: 0.0.0.0 Fault Module Timestamp: 45ea8fee Exception Code: c0000005 Exception Offset: 0004dc22 OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033 Additional Information 1: 1ec0 Additional Information 2: 1ec0fd70d07d060e5bfcf53c69ad1739 Additional Information 3: 2c48 Additional Information 4: 2c48940de5e7d1cb2e131ad6a0ca2feb Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt Help?

    Read the article

  • Dismount USB External Drive using powershell

    - by JC
    Hello, I am attempting to dismount an external USB drive using powershell and I cannot successfuly do this. The following script is what I use: #get the Win32Volume object representing the volume I wish to eject $drive = Get-WmiObject Win32_Volume -filter "DriveLetter = 'F:'" #call dismount on that object there by ejecting drive $drive.Dismount($Force , $Permanent) I then check my computer to check if drive is unmounted but it is now. The boolean parameters $force and $permanent have been tried with different permutations to no avail. The exit code returned by the dismount command changes when the params are toggled. (0,0) = exit code 0 (0,1) = exit code 2 (1,0) = exit code 0 (1,1) = exit code 2 The documentation for exit code 2 indicates that there are existing mount points as a reason why it cannot dismount. Although I am trying to dismount the only mount point that exists so I am unsure what this exit code is trying to tell me. Having already trawled the web for people experiencing similar problems I have only found one additional command to try and that is the following: # executed after the .Dismount() command $drive.Put() This additional command does not help. I am running out of things to try, so any assistance anyone can give me would be greatly appreciated, Thanks.

    Read the article

  • Logic behind SCCM 2012 required PXE deployments

    - by Omnomnomnom
    I'm in the process of setting up Windows 7 deployment through PXE boot, with Microsoft SCCM 2012. The imaging itself works very well, but I have a question about the logic behind PXE deployments. My setup is the following: My Windows 7 deployment task sequence is deployed to the unknown computers group. (not required, press F12 to start installing) OSDComputerName variable is also set on the unknown computers group, so unknown computers that are being imaged will prompt for a pc name. The computer then becomes known in SCCM and is added to the correct collection(s). But if I want to reïnstall windows on a known computer things are different: I can do a required deployment of the imaging task sequence to the collection of computers. Then windows installs through PXE, without any human interaction, keeping the original computer name. But because the initial deployment was not required, the "required PXE deployment" flag is not set. So as soon as I add a new computer to a collection with a required PXE deployment, it will start to reïnstall windows again. I can also deploy the imaging task sequence to the new unknown computers as required, so the flag gets set initially. But then it does not prompt for a computer name. (and it generates a name like MININT-xxx) Which is also sort of what I want. Because when i want to re-install a machine, I want it to install without interaction. How can I solve this?

    Read the article

  • Bash Script - Traffic Shaping

    - by Craig-Aaron
    hey all, I was wondering if you could have a look at my script and help me add a few things to it, How do I get it to find how many active ethernet ports I have? and how do I filter more than 1 ethernet port How I get this to do a range of IP address? Once I have a few ethenet ports I need to add traffic control to each one #!/bin/bash # Name of the traffic control command. TC=/sbin/tc # The network interface we're planning on limiting bandwidth. IF=eth0 # Network card interface # Download limit (in mega bits) DNLD=10mbit # DOWNLOAD Limit # Upload limit (in mega bits) UPLD=1mbit # UPLOAD Limit # IP address range of the machine we are controlling IP=192.168.0.1 # Host IP # Filter options for limiting the intended interface. U32="$TC filter add dev $IF protocol ip parent 1:0 prio 1 u32" start() { # Hierarchical Token Bucket (HTB) to shape bandwidth $TC qdisc add dev $IF root handle 1: htb default 30 #Creates the root schedlar $TC class add dev $IF parent 1: classid 1:1 htb rate $DNLD #Creates a child schedlar to shape download $TC class add dev $IF parent 1: classid 1:2 htb rate $UPLD #Creates a child schedlar to shape upload $U32 match ip dst $IP/24 flowid 1:1 #Filter to match the interface, limit download speed $U32 match ip src $IP/24 flowid 1:2 #Filter to match the interface, limit upload speed } stop() { # Stop the bandwidth shaping. $TC qdisc del dev $IF root } restart() { # Self-explanatory. stop sleep 1 start } show() { # Display status of traffic control status. $TC -s qdisc ls dev $IF } case "$1" in start) echo -n "Starting bandwidth shaping: " start echo "done" ;; stop) echo -n "Stopping bandwidth shaping: " stop echo "done" ;; restart) echo -n "Restarting bandwidth shaping: " restart echo "done" ;; show) echo "Bandwidth shaping status for $IF:" show echo "" ;; *) pwd=$(pwd) echo "Usage: tc.bash {start|stop|restart|show}" ;; esac exit 0 thanks

    Read the article

  • What's the right way to create a Ubuntu user whose home directory is /var/www/SITE?

    - by Leonnears
    First of, I need to state I'm a complete ignorant when it comes to server administration on Ubuntu, and I'm doing what I can. I have been trying to do this for hours with no luck. Basically, I want to create a Ubuntu user whose home directory is /var/www/SITE, and prefered it is chroot'd to it. The chroot part is not so important right now, as first I prefer to make anything work. The user should be able to upload files here and the webserver (www-data user?) should be able to pick them up with no problem. I was able to create the user and give it the home directory /var/www/SITE. (the user is "anders"). I gave him a password, and "anders" can connect to FTP just fine and upload files. But here's where things don't work: While my user can upload files to that /var/www/SITE directory, when I access the webpage on my browser I get a Forbidden error. Note that anders is also a member of the www-data group. I can fix this by running sudo chmod g+s /var/www/SITE/* anders -R but this is of course not ideal. Ideally the files should "work" as soon as I upload them. What's the right way to fix this? If it matters (don't think so), I'm editing my files in Coda 2 and anders is the user for it.

    Read the article

  • Windows 7 disk backup and clone for deployment to multiple systems

    - by gregmac
    I'm in the process of deploying some new PCs (there's only 8), all identical hardware. What I'd like to do is install Windows 7 (64bit), join to domain etc, install a bunch of other software, and then clone that drive to multiple other machines. I'd also like to be able to use it as a backup image, so the machine can be restored back to that image at some future date. I understand this involves at least sysprep, but I am confused after reading some tutorials that talk about using Windows Automated Installation Kit, or hacks with the registry and custom-build batch files. This process seems overly complex to me: I did something similar 10+ years ago, and and don't remember it being this bad. Surely things have improved in a decade? There's also some products that involve having network servers running deployment software, network boot, etc etc.. this is way more than I want to set up. My systems are all identical hardware. Is there a simplified way to clone PCs? Preferably (since I'm a lazy developer, and not an IT admin) I'd like to find some off-the-shelf product that I can run after I get the machine setup, that will spit out a bootable DVD I can run on all the other systems, which will boot up, ask for a computer name, join it to the domain, and that's it. Does such as product exist?

    Read the article

  • Recommendations for secure business collaboration tools

    - by Michael Prescott
    I'm searching for a secure and easy way for business partners to collaboratively edit and exchange documents, share calendars, create schedules, and assign tasks. I speculate that the ideal collaboration environment or work-flow would actually involve several technologies and services. My co-workers and I have tried a variety of things from Google Apps to Wiki's, but nothing feels very fluid or complete. I suppose defining what we need and our constraints is probably in order: collaboratively edit basic text documents and spreadsheets exchange documents like flow-charts, graphs, and files generated by our other desktop applications, but not source code assign tasks to each other and ourselves and track the history of those tasks easily see when relevant documents have been modified since last viewing and ability to easily push notifications to relevant workers (a clean front page that shows updates would probably suffice) provide limited access to contract workers and guests users if a remote user system is compromised (keystroke logger or other spyware) we don't want the criminal to be able to gain access to all business documents (processes, trade-secrets, customer lists, etc.) simply because they gained access to a single Google account (or whatever web service) Cannot be a difficult to administer VPN infrastructure Cannot cost more than $100 per month (yeah, money is tight) Needs to support up to 25 users We can host our own web applications, but it must be low maintenance solution

    Read the article

  • VMware Workstation update stopped autofit guest working

    - by u8sand
    VMware one day offered an update (8.0.1 build-528992 my current version) from 8.0. I accepted it, because updates usually fix problems. However not in this case... Previously it worked very well. Now, it still "works" but the one glitch I'm getting makes it too hard to deal with. This screenshot will explain my problem: As you can see, my virtual PC is not resizing correctly. (This happens with any operating system), autofit guest just doesn't work - it only results in things like this happening. Thanks to the tools it becomes very hard to NOT autofit guest. I've tried uninstalling 8.0.1 completely and installing 8.0 again but with the same results. I don't really understand what the new update has done to VMware Workstation or to my virtual machines. I do believe this isn't VMware Workstation's direct fault but from VMware Tools, which would explain why going back to 8.0 didn't work since VMware tools has its own updates. How can I fix this? The host is running Windows 7 Ultimate 64-bit.

    Read the article

  • VMware vSphere Hypervisor 5 with Intel SPL 5000 in Raid 0 no boot from DVD?

    - by Richard
    I hope this is the correct StackExchange, since I am only using StackOverflow for Web development, but need some help with my server configuration. I would like to install VMware vSphere Hypervisor 5 on my server here at home and run a view machines on it such as Windows Server 2008 and Red Hat. I used to have either OpenSuse or Windows Server 2008 installed but I would like to get into VMWare Hypervisor. My hardware configuration: - Intel S5000PSL with bios version S5000.86B.10.60.0091 build date 10/09/2008 as of read out of bios - E5420 @ 2.5GHz Intel Xeon CPU The Intel Virtualization Technology is enabled in the BIOS - DVD DH20A4P DVD Writer - 8GB ECC Ram I have configured a RAID 0 on my 2 WD 2TB SATA drives I have burned the Hypervisor 5 on an empty DVD and it is bootable, I tested it on my client PC. The main problem here is basically, that I cannot boot the DVD on my server. I have set the Boot Option to the DVD drive. I have booted from the BIOS straight in the DVD drive and it does not work. I do not see any error messages. The only thing I see are the PXE error messages when it tries booting from the network and other devices, obviously without any result. Does anybody know why I cannot boot the DVD? What could cause the problem? I have sucessfully installed Windows Server 2008 via original DVD about 1 year ago, so the DVD drive can read and does work. The DVD drive is available in the BIOS and I have checked all cables and none of them is loose in any way. I even see the light flashing but it does not want to boot from the DVD. I am looking forward to suggestions and things that I should check. Thank you very much

    Read the article

  • Proftpd on Debian ignoring umask setting

    - by sodan
    I have found a solution for my problem. This is what I did: I added the following to my /etc/proftpd/proftpd.conf: <Limit SITE_CHMOD> DenyAll </Limit> I have the following problem: When I upload files to my FTP server the umask I set is totally ignored. All files have permissions 644. I use Debian 5.0.3 as operating system and proftpd 1.3.1 as ftp server. The user logging in is called mug and he is a local user (no virtual user). He is chrooted to the home directory /home/mug/ I tried the following things: 1. set umask setting in /etc/proftpd/proftpd.conf Umask 000 000 This should result in 777 for directories and 666 for files since directory umask is applied to 777 and file umask is applied to 666. After that I of course restarted the proftpd to be sure that the config is reloaded. 2. set umask for the user in /home/mug/.bashrc I added the following to the .bashrc for the user: umask 0000 After that I reloaded the .bashrc: source /home/mug/.bashrc I also checked the umask setting for the user by changing to the user and using this command: su mug umask As result I got a umask of 0000 prompted. So this worked. But still all my uploaded files are having 644 permissions set :( What am I doing wrong?

    Read the article

  • Hyper-V Guests Dying

    - by Jon Rauschenberger
    I just hit my THIRD instance of a Hyper-V guest machine dying with the exact same behavior. In all three instances we are hosting WS2008 guests on a WS2008 host. AFter a config change, we reboot the guest and the guest OS comes up but in a very cripled state. Specifically, we are able to log into the guest, but can't launch any apps and the guest never comes active on the network. I opened a support ticket with MS the second time this happened and they focused in on the DCOM subsystem not coming up...best explanation they could provide was that permissions on key system files got corrupted. I eventually gave up on the ticket after close to 10 hours on the phone trying different things that were going no where. What really concerns me is that we have now seen the exact same thing happen to a guest hosted on a completly differet host machine. There is zero hardware overlap between the two. Has anyone seen this before?? It's really odd behavior, but it also seems like there's a pattern here that's concerning me. Thanks, jon

    Read the article

  • client flips between internal and external IP addresses??

    - by jmiller-miramontes
    I have what seems like a not-particularly-complicated home network, all things considered: a DSL line comes in to a modem/router, which goes off to a switch, which supports a bunch of machines. My machines live in a 192.168.0.x address space; however, I'm running some public servers on the network, so I have a block of 8 (5, really) static IP addresses that are mapped to the servers by the router. The non-servers get 192.168.0.x addresses via NAT; some machines have static addresses and some get addresses from DHCP. Locally, I'm running a DNS server (named) to map between the domain names and the 192.168 address space. Somewhat messy, but everything basically works. Except: One of my local non-server clients occasionally switches from its internal address to its external address. That is, if I check the logs of a website I'm running internally, the hits coming from this client sometimes show up with the internal 192.168 address, and sometimes with the external (216.103...) address. It will flip back and forth for no apparent reason, without my doing anything. This can be a problem in terms of how the clients interact with the way I have some of the clients' SSH systems configured (e.g., allowing access from the internal network but not the external network), but it also Just Seems Wrong. I will confess that I'm kinda skating on the very edge of my networking competence here, but I can't for the life of me figure out what's going on. If it helps, the client in question is running Mac OS X / 10.6; its address is statically assigned, is not one of the five externally-accessible addresses, and gets its DNS from (first) the internal DNS server and (second) my ISP's DNS servers. I can't swear that none of the other NAT clients are also showing this problem; the one I'm dealing with is my everyday machine, so this is where I run into it. Does anybody out there have any advice? This is driving me crazy...

    Read the article

  • File transfer from MP3 player to computer

    - by JP
    I own an old 20GB Creative Zen jukebox (all external screws are gone on it LOL) and I would like to transfer files back to my PC to get them on my new iPod. Problem is, no matter what software I use (WinAMP, Creative Media Source or Windows Media Player), it just stops transferring files on my HD with an error message that says there is no more space on the destination folder. Problem is, there is still 320GB free. I tried lot of things like installing newer driver, latest Zen plug-in for Media Source, latest WinAMP version. Sometimes, it just works and then again, it stops working and I get this non-sense error. Restarting my PC sometime solves the issue by giving me enough time to transfer 10 or 15 more files and then I get the error again and again. Yesterday though I managed to transfer up to 3GB of MP3s on my computer before getting the error. Seems like I'm having a driver issue or a weird behavior from the player and/or the software I'm using. 3 different software can't reproduce the exact same issue by themselves so it must be something related to the driver. I can't find any post of any sort concerning such issue on old forums. Any idea?

    Read the article

  • Intermittent "Lost connection to MySQL server at 'reading initial communication packet'"

    - by db2
    Our web environment consists of two servers. Web front-end. Dell PowerEdge R610, RHEL 5.5, Apache 2.2.17, php 5.2.14. Database server. Dell PowerEdge R710, Windows 2008 R2 Standard x64, MySQL 5.5.11-log x64. Normally these two work perfectly fine together. However, when I try to get them talking via a dedicated LAN on their secondary NICs (each machine has four of them), things get flaky. I have NIC #2 on both machines configured on the 172.16.1.0/24 subnet, with no gateway or DNS servers (obviously, since it's just those two systems), and I put the private IP address of each machine into the hosts file of the other. The routing tables on both machines look okay after I do this. I've tried this with both a crossover cable draped directly between the two NICs, and also via a dedicated vlan on the switch in the rack. In either case, I get intermittent connection problems. It's a fairly small percentage of connections that fail, but it's enough to cause a significant problem, and I have to switch back to the main network connection, which will contend with all the other traffic and hosts on the switch. The full error message that appears in the application log: SQLSTATE[HY000] [2013] Lost connection to MySQL server at 'reading initial communication packet', system error: 110 Am I doing something really dumb that's causing this to not work properly? Anything I can check in MySQL that would explain why it's failing to connect occasionally?

    Read the article

  • What do I need in order to extract and combine text files from multiple ZIP files, via command line?

    - by Iszi
    I've got an interesting scripting challenge in front of me. I'm fairly certain there's a way to do it, but I feel like I'm probably lacking some particular tools and/or functional knowledge. There's some fifty-plus ZIP files that each contain, among other things, text files that need to be merged with one another. The structure is something like this: C:\Reports\FirstJob-1.zip |-MyName |-FirstJob |-1 |-[Some other folders] |-TXTReports |-English |-[Some other files] |-Report.txt C:\Reports\FirstJob-2.zip |-MyName |-FirstJob |-1 |-[Some other folders] |-TXTReports |-English |-[Some other files] |-Report.txt C:\Reports\SecondJob-1.zip |-MyName |-SecondJob |-1 |-[Some other folders] |-TXTReports |-English |-[Some other files] |-Report.txt If I had all the Report.txt files in one regular folder, and uniquely named, I could probably just write a FOR statement that targets *.txt and runs something like type filename.txt >> Consolidated.txt on each. However, these all have the same file name and are embedded deep within separate ZIP files. The potentially useful tools I currently have at my disposal are Windows XP Professional SP3, PowerShell, and WinZip. I'd rather not download or install anything else, but I do understand that third-party tools (or additional tools from Microsoft or WinZip) may be necessary. Whatever tools I use should run natively in Windows. I really don't want to have to mess with Cygwin or other emulators on this system. At the very least, I need a tool that will allow me to analyze and manipulate ZIP files from the command line. Also, are there any other particular complications to this that I've not yet thought of?

    Read the article

  • iOS 6 in-app email does not send from within any app that supports it

    - by Joe Termine
    A strange problem -- Last night I upgraded to the final release of iOS 6 on my iPhone 4S and my iPad 2. When I open an app that allows you to send emails from within the app (e.g. adobe Reader, TurboScan, etc.) -- doesn't matter which one -- I am prompted with the email dialog from within the app, I can compose the message, but when I go to send one of two things will happen: either the email sending sound will "swoosh" and the dialog will close (leading me to think it worked) or some apps with good error handling will say there is an "error sending email." The error logs on my device are not reporting errors. It's just that the email doesn't really send. I have two Exchange mail boxes on these devices. One connects to a corporate network hosting on-premise exchange 2007 and the other connects to Gmail over the exchange interface. Have attempted to delete and re-pair these accounts (one at a time) without any change. I'm wondering if others are experiencing this problem, or whether I should just wipe the devices and chalk it up to (another) failed upgrade. Thoughts much appreciated. Joe

    Read the article

  • Chef: nested data bag data to template file returns "can't convert String into Integer"

    - by Dalho Park
    I'm creating simple test recipe with a template and data bag. What I'm trying to do is creating a config file from data bag that has simple nested information, but I receive error "can't convert String into Integer" Here are my setting file 1) recipe/default.rb data1 = data_bag_item( 'mytest', 'qa' )['test'] data2 = data_bag_item( 'mytest', 'qa' ) template "/opt/env/test.cfg" do source "test.erb" action :create_if_missing mode 0664 owner "root" group "root" variables({ :pepe1 = data1['part.name'], :pepe2 = data2['transport.tcp.ip2'] }) end 2)my data bag named "mytest" $knife data bag show mytest qa id: qa test: part.name: L12 transport.tcp.ip: 111.111.111.111 transport.tcp.port: 9199 transport.tcp.ip2: 222.222.222.222 3)template file test.erb part.name=<%= @pepe1 % transport.tcp.binding=<%= @pepe2 % Error reurns when I run chef-client on my server, [2013-06-24T19:50:38+00:00] DEBUG: filtered backtrace of compile error: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in []',/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:inblock in from_file',/var/chef/cache/cookbooks/config_test/recipes/default.rb:12:in from_file' [2013-06-24T19:50:38+00:00] DEBUG: filtered backtrace of compile error: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in[]',/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in block in from_file',/var/chef/cache/cookbooks/config_test/recipes/default.rb:12:infrom_file' [2013-06-24T19:50:38+00:00] DEBUG: backtrace entry for compile error: '/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in `[]'' [2013-06-24T19:50:38+00:00] DEBUG: Line number of compile error: '19' Recipe Compile Error in /var/chef/cache/cookbooks/config_test/recipes/default.rb TypeError can't convert String into Integer Cookbook Trace: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in []' /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:inblock in from_file' /var/chef/cache/cookbooks/config_test/recipes/default.rb:12:in `from_file' Relevant File Content: /var/chef/cache/cookbooks/config_test/recipes/default.rb: 12: template "/opt/env/test.cfg" do 13: source "test.erb" 14: action :create_if_missing 15: mode 0664 16: owner "root" 17: group "root" 18: variables({ 19 :pepe1 = data1['part.name'], 20: :pepe2 = data2['transport.tcp.ip2'] 21: }) 22: end 23: I tried many things and if I comment out "pepe1 = data1['part.name'],", then :pepe2 = data2['transport.tcp.ip2'] works fine. only nested data "part.name" cannot be set to @pepe1. Does anyone knows why I receive the errors? thanks,

    Read the article

  • Emails from web site sometimes blank or gibberish

    - by John Gardeniers
    Our company has one web site with an online store based on osCommerce. The system sends emails for various reasons, such as password changes, order confirmations, etc., using PHP's mail() function. We occasionally have customers report that the email they received is either blank (email is plain text format) or gibberish (email is in HTML format). In the latter case it's really just HTML that's being displayed as raw text but of course the customers can't read it. In this case the first opening tag's <, and sometimes a few more characters, has gone missing. In an attempt to determine whether this was happening only for certain customers or email systems I configured the web site to send a CC of each message to a service account at my end. Those CC'd messages always arrive intact and display correctly in Outlook. For what it's worth, it seems to happen a little more frequently to Hotmail users but is certainly not limited to them. As the web site is on a shared (Debian) host there's precious little I can do about debugging things from that end, although if I made the right request I feel the hosting company staff would help me, even though they have limited resources to spend on such matters. Any suggestions on what else I might do to try and determine just why those emails are not being received correctly by some customers, yet a CC copy arrives just fine?

    Read the article

  • How to deal with job that stop and cannot continue unless made foreground?

    - by Vi
    Recent example: mountlo (using UML): vi@vi-notebook:~/b$ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other& [1] 32561 vi@vi-notebook:~/b$ Checking that ptrace can change system call numbers...OK Checking syscall emulation patch for ptrace...OK Checking advanced syscall emulation patch for ptrace...OK Checking PROT_EXEC mmap in /tmp...OK Checking for the skas3 patch in the host: - /proc/mm...not found - PTRACE_FAULTINFO...not found - PTRACE_LDT...not found UML running in SKAS0 mode [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ bg [1]+ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other & [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ bg [1]+ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other & [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ bg [1]+ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other & [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ fg mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other Linux version 2.6.15 (miko@dorka) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Mon Feb 27 13:27:52 CET 2006 (normal output) ... vi@vi-notebook:~/b$ socat - exec:'mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8\,allow_other',pty,ctty fusermount: waitpid: No child processes vi@vi-notebook:~/b$ Also happens with Gimp (when it does run it's plug-ins). Parts of Gimp started by `gimp q.jpg&' freeze and cannot continue unless "killall -CONT" or made foreground. Is it a bug? How to reliably start things in a background?

    Read the article

  • Songbird looping my library playlist

    - by Logi
    I'm using Songbird (on Windows) as my iTunes replacement. There's two things that annoy me about Songbird: 1) It has a web browser built in. I can ignore this as I don't use it. But, seriously, a web browser? :/ 2) It loops my library. This, I don't like. The way I play my audio is by launching Windows Explorer, navigating to my media library and double clicking on a single MP3. I only want to hear that one MP3. I don't use the Media Import function in Songbird - Or any other media player. But it insists on adding every song I play to the Library. Disabling this would be excellent but, falling short of that, I'd at least like to stop it repeating every song in the library. When Songbird finishes playing the last song in the Library (which is the song I just opened via Windows Explorer (gets appended to the library)), it jumps to the top of the library and starts playing all the songs again. How can I stop this? Songbird is set to 'Repeat none'

    Read the article

  • Setup site folders on Apache and PHP

    - by Cobus Kruger
    I'm trying to set up my first Apache server on my Windows PC at home and I have real trouble finding out which configuration settings go where. I downloaded and installed XAMPP which seemed to get everything nicely set up and can see a working website on http://localhost. So far so good. The point of this is to develop a website of course, and to make my life easier (irony?), I wanted to let the web site root point to my Eclipse project folder. So I opened httpd-vhosts.conf, uncommented a VirtualHost block and changed its DocumentRoot to my local path. Now when I try to load http://localhost I get a 403 (Access denied) error. So where do I configure permissions for my folder? And is that all I need to let my site run from the folder specified or am I going to have to clear another hurdle? Update: I tried to simplify things a little, so I reinstalled XAMPP and got back to a working http://localhost. Then I confirmed that httpd-vhosts.conf is included in httpd.conf and made the following changes to httpd-vhosts.conf: Uncommented the line NameVirtualHost *:80 Added a virtual host shown below. Restarted Apache and saw the expected page on http://localhost <VirtualHost *:80> DocumentRoot "C:/xampp/htdocs/" ServerName localhost ErrorLog "logs/dummy-host2.localhost-error.log" CustomLog "logs/dummy-host2.localhost-access.log" combined </VirtualHost> I then created a new folder named C:\testweb, added an index.html file and changed the DocumentRoot line shown above. For all intents and purposes I would then expect the two configurations to be equivalent. But this setup gives me an error 403. Even though the C:\testweb folder already had the same permissions as the C:\xampp\htdocs folder, I then went further and gave the Everyone group full control of C:\testweb and got exactly the same problem. So what did I miss?

    Read the article

< Previous Page | 579 580 581 582 583 584 585 586 587 588 589 590  | Next Page >