Search Results

Search found 22281 results on 892 pages for 'password management'.

Page 585/892 | < Previous Page | 581 582 583 584 585 586 587 588 589 590 591 592  | Next Page >

• Computer won't recognize second WD internal HD

  - by music man

  I installed a Western Digital Caviar Green 1TB internal hard drive, and want to use it for back up. My BIOS recognizes the device, but it is not recognized in Disk Management. It also is not recognized in "my computer." When I right-click my C drivepropertieshardware, I see it listed. First the drive was plugged into SATA port 1 on my motherboard, then I tried it in port 3, where it remains. I've been working on this for hours. Any help would be appreciated. More info Hard drive model #:WD10EADS-65M2B1 Windows 7 Home Premium 64 bit Service Pack 1 Computer:HP Model p6404y, Processor:AMD phenom II x4 820 2.80GHZ 8 gigs RAM

  Read the article

• running chkdsk on a disk without a drive letter

  - by neubert

  I have a hard drive that shows up in Disk Management as having two partitions. One of the partitions says 69.71GB and that's it. The other says 4.82GB and, underneath that, Healthy (OEM Partition). I'm trying to do chkdsk on the 69.71GB partition and am unsure of how to do it without a drive letter. Any ideas? It's an NTFS partition that's gotten corrupted. Linux's ntfsfix spits out a bunch of errors so I'm thinking chkdsk might be better. Thanks

  Read the article

• High RAM usage, not seen in task manager

  - by r4dk0

  Hi! I am using Windows 7 64-bit 7600, with 4Gb of RAM. I have a serious problem, since something uses a lot of RAM(3.94Gb) and I see "stairs" in taskmanager, it rises to +3Gb RAM and it drops to about 2Gb and then rises slowly again, and suddenly drops. I tryed installing this version again and other versions, newer ones, but no effect. Ive even tryed disconnecting other harddrives while I installed it, and then installed NOD32 and updated it. How could I know what is using that much RAM? P.S.: I was suspecting superfetch service, I disabled it, restarted pc, and it didnt work, since the memory is the highest point when I login with password, it is really annoying since I need about 1minute to see my desktop, neither alone try anything else. After loging in it slowly drops and after random time it starts rising again. That doesnt happen immediately after a fresh windows install. And how the drivers go, I tryed older drivers for GPU, and newest ones.

  Read the article

• High RAM usage, not seen in task manager

  - by r4dk0

  Hi! I am using Windows 7 64-bit 7600, with 4Gb of RAM. I have a serious problem, since something uses a lot of RAM(3.94Gb) and I see "stairs" in taskmanager, it rises to +3Gb RAM and it drops to about 2Gb and then rises slowly again, and suddenly drops. I tryed installing this version again and other versions, newer ones, but no effect. Ive even tryed disconnecting other harddrives while I installed it, and then installed NOD32 and updated it. How could I know what is using that much RAM? P.S.: I was suspecting superfetch service, I disabled it, restarted pc, and it didnt work, since the memory is the highest point when I login with password, it is really annoying since I need about 1minute to see my desktop, neither alone try anything else. After loging in it slowly drops and after random time it starts rising again. That doesnt happen immediately after a fresh windows install. And how the drivers go, I tryed older drivers for GPU, and newest ones.

  Read the article

• Again WPA Connection problem even after changed to latest version ..please help

  - by Renjith G

  I am using hostapd, wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board with linux and my desktop PC, Windows XP SP2 (with Olitec USB wireless) are fine. But when I configured the WPA type, the connection seems established but shows the status "TKIP - Key Absent" in the security dialog box. Anyone faced this problem? Am attaching the conf files and the connection status. In the AP side am complaining . I am using the in built radius server conf with the hostapd 0.4.7 hostapd.conf interface=ath0 driver=madwifi logger_syslog=0 logger_syslog_level=0 logger_stdout=0 logger_stdout_level=0 debug=0 eapol_key_index_workaround=1 dump_file=/tmp/hostapd.dump.0.0 ssid=Renjith G wpa wpa=1 wpa_passphrase=mypassphrase wpa_key_mgmt=WPA-EAP wpa_pairwise=TKIP CCMP wpa_group_rekey=600 macaddr_acl=2 /* commented */ ieee8021x=1 /* commented */ eap_authenticator=1 own_ip_addr=172.16.25.1 nas_identifier=renjithg.com auth_server_addr=172.16.25.1 auth_server_port=1812 auth_server_shared_secret=key1 ca_cert=/flash1/ca.crt server_cert=/flash1/server.crt eap_user_file=/etc/hostapd.eap_user hostapd.eap_user "*@renjithg.com" TLS And the commands am using are wlanconfig ath0 create wlandev wifi0 wlanmode ap iwconfig ath0 essid Renjith channel 6 ifconfig ath0 192.168.25.1 netmask 255.255.255.0 up hostapd -ddd /etc/hostapd.conf Please correct if am wrong .. Also am getting the debug messages on my AP when am connecting in my windows machine through WPA ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf Configuration file: /etc/hostapd.conf Line 18: obsolete eap_authenticator used; this has been renamed to eap_server madwifi_set_iface_flags: dev_up=0 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'Renjith G wpa' madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA= 0x1 madwifi_set_iface_flags: dev_up=1 madwifi_set_privacy: enabled=1 WPA: group state machine entering state GTK_INIT GMK - hexdump(len=32): 9c 77 cd 38 5a 60 3b 16 8a 22 90 e8 65 b3 c2 86 40 5c be c3 dd 84 3e df 58 1d 16 61 1d 13 d1 f2 GTK - hexdump(len=32): 02 78 d7 d3 5d 15 e3 89 9c 62 a8 fe 8a 0f 40 28 ba dc cd bc 07 f4 59 88 1c 08 84 2b 49 3d e2 32 WPA: group state machine entering state SETKEYSDONE madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 Deauthenticate all stations l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 < Register Fail < Register Fail Wireless event: cmd=0x8c04 len=20 madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state DISCONNECTED WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 ioctl[unknown???]: Invalid argument Wireless event: cmd=0x8c03 len=20 New STA WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state INITIALIZE madwifi_del_key: addr=00:0a:78:a0:0b:09 key_idx=0 WPA: 00:0a:78:a0:0b:09 WPA_PTK_GROUP entering state IDLE WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION WPA: 00:0a:78:a0:0b:09 WPA_PTK entering state AUTHENTICATION2 IEEE 802.1X: 4 bytes from 00:0a:78:a0:0b:09 IEEE 802.1X: version=1 type=1 length=0 NOW am getting the following error message with latest tools. *This is the latest error messages..please refer this only..* ~/wlanexe # ./hostapd -ddd /etc/hostapd.conf TLS: Trusted root certificate(s) loaded madwifi_set_iface_flags: dev_up=0 madwifi_set_privacy: enabled=0 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 3) Could not connect to kernel driver. Deauthenticate all stations madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=2 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 2) madwifi_set_privacy: enabled=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=1 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=2 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=3 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid 'RenjithGwpa' SSID - hexdump_ascii(len=11): 52 65 6e 6a 69 74 68 47 77 70 61 RenjithGwpa PSK (ASCII passphrase) - hexdump_ascii(len=12): 6d 79 70 61 73 73 70 68 72 61 73 65 mypassphrase PSK (from passphrase) - hexdump(len=32): a6 55 3e 76 94 8b d9 81 a1 22 5e 24 29 83 33 86 11 a8 7e 93 19 7c a9 ab ab cc 12 58 37 e5 35 b6 RADIUS local address: 172.16.25.1:1024 madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x1 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA=0x1 WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 madwifi_set_privacy: enabled=1 madwifi_set_iface_flags: dev_up=1 ath0: Setup of interface done. l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8b1a len=24 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Data frame from not associated STA 00:0a:78:a0:0b:09 Wireless event: cmd=0x8c04 len=20 Wireless event: cmd=0x8c03 len=20 New STA ioctl[unknown???]: Invalid argument madwifi_process_wpa_ie: Failed to get WPA/RSN IE Failed to get WPA/RSN information element. Data frame from not associated STA 00:0a:78:a0:0b:09

  Read the article

• How to backup/restore excluding filestream varbinary in SQL Server 2008?

  - by fdierre

  There is an application used in a production site that uses SQL Server 2008 as its DBMS. The database schema uses Filestream Varbinary to save binary data on the filesystem instead of directly into the DB tables. The point is that now and then it would be useful to copy the production database on development machines, mostly for doing troubleshooting. The database is too big for comfortably moving it around, but it would be ok if it could be moved leaving out the filestream varbinary fields. In other words, I am trying to make an "imperfect" copy of a database: i.e., on the destination database, it is ok to have NULL values instead of the varbinary. Is this possible? I tried looking for the feature on the SQL Server Management studio and did a backup that excludes the filegroup containing the filestream varbinary, but I cannot restore: MSSMS complains that the restore cannot be done because the backup is incomplete (of course). Is it possible to achieve what I am trying to do in some way?

  Read the article

• How to connect ftp server outside lan?

  - by srisar

  hi all , im setting up home ftp server, so i can share some files with my friends outside my lan. I am using filezilla server and everything configured. http://www.canyouseeme.org/ even see my port 21 as opend, but when i connect through fit client or through web browser, its saying "530 User saravana access denied." how can i solve this problem, i checked the user name and password, everything is good, but i didnt sent any passive mode, (i didnt know how to set), if that is causing the trouble can anyone help me, bu the way i can connect locally through localhost.

  Read the article

• SSH via DHCP server

  - by SFault

  I have a DHCP server setup and I can't seem to connect to anything through SSH. When I'm logged in to the server itself, I can SSH. But when I connect any machine to the DHCP server, that machine can SSH but every server I SSH to asks for a password when the normal behavior (when not connected to the DHCP server) does not. Here are the contents of my iptables script that are related to port 22. $IPT -t nat -A PREROUTING -i $LAN -p tcp --dport 22 -j REDIRECT --to-port 22 $IPT -A FORWARD -i $LAN -p tcp --dport 22 -j ACCEPT $IPT -A INPUT -i $LAN -p tcp --dport 22 -j ACCEPT $IPT -A INPUT -i $WAN -p tcp --dport 22 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT $IPT -A INPUT -i $LAN -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT Am I missing something?

  Read the article

• Authenticating AIX Users Against OID (Oracle Internet Directory)

  - by mwilkes

  We have a need to authenticate local users on an AIX server against OID using LDAP. We have a branch within OID where we've placed and synchronized Active Directory users. We've also configured external authentication on OID so that it verifies username/passwords against AD. Has anyone configured authentication for AIX in this type of environment? We believe we need to populate unix specific attributes on the user's directory entry in OID, but are unsure which attributes are needed. Additionally, we are looking to authenticate Oracle database users against OID but because of external authentication we are unable to populate the ORCLPASSWORD attribute on the user's directory entry on OID (which is the attribute Oracle is looking for password in). Help with either or both are welcome.

  Read the article

• Enable H.264 (or x264) in AVIDemux

  - by Thomas

  I am trying to get AVIDemux set up with the X264 codec using this tutorial. The following is what goes down when I get to the ./configure --enable-mp4-output command Thomas-Phillipss-MacBook:x264 tomdabomb2u$ sudo ./configure --enable-mp4-output Password: Unknown option --enable-mp4-output, ignored Found no assembler Minimum version is yasm-0.6.2 If you really want to compile without asm, configure with --disable-asm. So I tried it. Thomas-Phillipss-MacBook:x264 tomdabomb2u$ sudo ./configure --enable-mp4-output --disable-asm Unknown option --enable-mp4-output, ignored Warning: gpac is too old, update to 2007-06-21 UTC or later Platform: X86_64 System: MACOSX asm: no avs: no lavf: no ffms: no gpac: no pthread: yes filters: crop select_every debug: no gprof: no PIC: no shared: no visualize: no bit depth: 8 You can run 'make' or 'make fprofiled' now. I issued make, and then Thomas-Phillipss-MacBook:x264 tomdabomb2u$ ./x264 -v -q 20 -o foreman.mp4 foreman_part_qcif.yuv 176x144. And as expected, the results are: x264 [error]: not compiled with MP4 output support So I'm stuck. Any ideas?

  Read the article

• What SDK I should choose on Amazon Web Service to build API on server app?

  - by Nguyen Minh Binh

  I am a newbie on Amazon Web Service. I have a task that setup then build a web service that provide APIs to Mac OS, iOS, Android client. There are some APIs and Database need to be kept in secure. I see that AWS support multiple platform such as Java, .Net, PHP,... It also support many Database Management System. Not yet, there are 2 special SDK for Android and iOS app. So, What should I choose (Java, .Net, PHP,...) to carry out my task? Does AWS support all webservice protocol? Does it support secure webservice? Thanks a lot.

  Read the article

• How to install wget on this?

  - by Winluser

  I did download RubyStack 2.0.3 for VMWare from http://bitnami.org/files/stacks/rubystack/2.0-3… but I cannot download anything on it! It appears that all basic utilities are missing/screwed: bitnami@linux:/var/tmp$ wget -bash: wget: command not found bitnami@linux:/var/tmp$ curl curl: error while loading shared libraries: libcurl.so.4: cannot open shared obj ect file: No such file or directory bitnami@linux:/var/tmp$ man wget -bash: man: command not found bitnami@linux:/var/tmp$ sudo apt-get install wget [sudo] password for bitnami: Reading package lists… Done Building dependency tree Reading state information… Done E: Couldn’t find package wget Any ideas how can I download anything on this machine? (I don't have physical access to it)

  Read the article

• Dell OpenManage iDrac

  - by mhouston100

  I have installed OpenManage Server Administrator on a Windows 7 workstation with the assumption that nothing needed to be done on the actual server I am trying to manage. The server has an iDrac v7 component and I was under the impression that OpenManage just connects to that? When I try to connect I put the IP address of the iDrac console and the username/password and I get a 'Connection Error' message. So my question, does OpenManage have to be installed on the server that is to be managed, even if it has a DRAC connection?

  Read the article

• Windows NT workstation on AD domain

  - by Tom

  We run a Windows NT workstation connected to special manufacturing equipment, that everyone is deathly afraid to touch. It has custom software and special cards inside of the machine, making a rebuild impossible. The problem is, we are migrating to an AD domain from an NT domain, and this workstation stills needs access to storage on the network (AD computers). How should I go about doing this, after we get rid of our NT Domain controller? Upgrading to 2000 is not an option (so says management). I know, I know, if it dies we are in trouble. But that's managements choice, we just need to get rid of this NT domain.

  Read the article

• Set Windows 7 Default Login to a Non Domain Account

  - by Joe Taylor

  We have 12 Laptop Pc's that we have upgraded from Windows XP to Windows 7. The laptops are used by staff on away days. They log on to a local account on the machine - say User1 with no password. On the Windows XP Login screen there was a drop down menu allowing them to log on to the Local Machine. However in Windows7 there is no such box and it is confusing staff. Windows 7 tries to log into the domain by default, it doesn't seem to remember where the user last logged into. Is there a way to set Windows7 to log on to the local machine by default instead of the domain? I do not want the staff to have to type for example stafflaptop1\User1 when they log on.

  Read the article

• Set Windows 7 Default Login to a Non Domain Account

  - by Joe Taylor

  We have 12 Laptop Pc's that we have upgraded from Windows XP to Windows 7. The laptops are used by staff on away days. They log on to a local account on the machine - say User1 with no password. On the Windows XP Login screen there was a drop down menu allowing them to log on to the Local Machine. However in Windows7 there is no such box and it is confusing staff. Windows 7 tries to log into the domain by default, it doesn't seem to remember where the user last logged into. Is there a way to set Windows7 to log on to the local machine by default instead of the domain? I do not want the staff to have to type for example stafflaptop1\User1 when they log on.

  Read the article

• Ubuntu Lucid startup events

  - by Lakshman Prasad

  On starting up Ubuntu, I seem to have to do the following, all the time: Enter the password for the keyring to unlock, so that it connects to wifi Enable the "Extra" Visual effects from the Appearances preferences Start skype. How can I automate all of these. Bonus points, if I can use the existing chat bundled in the system to use my skype account. Also, since I dual boot, I get the grub options initially to select Windows or Ubuntu that waits for 10 seconds for me to choose. How do I make it go to ubuntu, unless I explicitly not press a key to boot to windows. Thanks in advance.

  Read the article

• Internet cafe software for linux

  - by pehrs

  I have gotten a request to roll out a total of 8 internet cafe's in a large network. Budget is non-existent as it will all be done for a non-profit. I was planing to use Ubuntu and live-cds to minimize the amount of management required, but I can't seem to find any suitable internet cafe system that is Ubuntu based. The requirements are pretty basic: It needs to keep track of logged in time and log out users when their time it up. No billing will be done, it will just be used to ensure people can share the computers fairly. It should be possible to force logout from a central system. Users will be unskilled, so it has to have a GUI. What (preferably free, considering the shoe-string budget) software would you suggest to manage this?

  Read the article

• Multiple Schedule/Task Views (devs, customer, etc) in MS Project (or other)

  - by ThePlatypus

  Is there a way to configure multiple views/filters in MS Project for the same set of tasks? I want to have a view that is configured for customer's only, for example. So, it would have large milestone tasks only, and hide all of the details that are there for the benefit of the team members. If MS Project doesn't do this, is there any project management software that does? A free/open source version would be preferable. Edit: Apparently, "filter" was the word I needed in my Google searches. I found how to mark a task as a Milestone and use the pre-made Milestone filter. However, that still doesn't hide non-Milestone tasks the way I want it to. I haven't figured out how to make a true custom filter.

  Read the article

• Migrating from Apache2 to Lighttpd creating errors in PHP/mySQL?

  - by Jean-Philippe Murray

  Ok, I've been using basics ubuntu LAMP setups for years now, and I wanted to give lighttpd a try. My LAMP setup run in a virtual machine with scripts running just fine. So I created a new virtual machine, starting with a fresh install of ubuntu and made my setups. On this new VM, lighttpd + php works just fine. (Or at least it seems...) Problem occurs when I take the scripts from my LAMP setup and upload them to the new VM. I'm getting : Warning: mysql_real_escape_string(): Access denied for user 'www-data'@'localhost' (using password: NO) My lighttpd setup is configured as php-cgi but not my apache2 setup. Could this be the source of the problem? I think that scripts would be independent of the server configuration, so I doubt it. Also, I know that my DB connexion informations are good (as I can log in via phpmyadmin perfectly). I'm in the dark here, any pointers ? Thanks,

  Read the article

• How do I delete the Windows Explorer address bar history

  - by mlissner

  Note: I am NOT referring to Internet Explorer. I am using Windows XP and Windows Server 2008 and need to delete the history values from the file browser (aka Windows Explorer). Somebody put a password into the address bar as ftp://user:pass, and now I can't delete the value. Some forums say to delete this registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Explorer\TypedPaths In Windows XP, the key doesn't exist, and in Windows Server 2008, the key is there, but deleting it doesn't seem to help. Any help?

  Read the article

• Can i enlarge os c drive of my windows 8?

  - by Sorgatz

  Last year I got a new Western Digital WD Blue 500GB HDD to replace my old drive. The first thing I did was to install latest Windows 8. While installing Windows 8 I created 3 partitions, C drive for the OS and others for storage. The OS partition is 120GB (which at the time I thought would be plenty big) but I'm now realizing its too small! I wonder if it's possible to re-size HDD partition without reformatting and re-install my Windows 8. So that is my question, Can i enlarge os c drive of my windows 8 without having to re-format? I've used the Norton Partition Magic and Disk Management to make this happen but there doesn't seem to be any options to make it happen. Thanks for any help you guys can give regarding my question. I've worked hard to optimize my current install of Windows 8 and would hate to start all over again.

  Read the article

• Log centralization, display, transport and aggregation at scale v2

  - by Eric DANNIELOU

  This is a duplicate question of Log transport and aggregation at scale and http://stackoverflow.com/questions/1737693/whats-the-best-practice-for-centralised-logging, but the answers might differ now : The softwares described in 2009 may have changed since (for example Octopussy evolved from version 0.9 to 1.0.5). Rsyslog has become the default on most linux distro. Requirements have changed (security, software configuration management, ...). I'd like to ask the following questions : How do you centralize, display and archive system logs? How would you like to do it now if you had to? Most linux distro use rsyslog nowadays, which can provide reliable log transport. But some older unices, network devices and maybe windows box still use old udp rfc-style transport. How did you manage to get reliable transport? Storing logs for a few months can represent a huge amount of disk space. How do you store them? rdbms? Compressed and encrypted text files?

  Read the article

• Questions about adding space to an Amazon EC2 Instance

  - by Misha

  I have an Amazon EC2 instance that is running a simple LAMP stack with Amazon's flavor of linux. I want to stop it and add more disk space. We will need more than our current 8 gigabytes. I was wondering: 1) When I stop my instance what will be lost? Will the content of /var/www be lost? What does this mean? I am sure my instance isn't a spot instance. 1.5) What is an ephemeral disk? Is my instance completely ephemeral? Are parts of it ephemeral? When I press "stop", probably, not everything is cleared. So what is cleared? 2) Amazon has tools in the Management Console to facilitate enlarging an instance? 3) Will I have to re-partition the instance? Can an instance expand the partition it is running on?

  Read the article

• How to control admission policy in vmware HA?

  - by John

  Simple question, I have 3 hosts running 4.1 Essentials Plus with vmware HA. I tried to create several virtual machines that filled 90% of each server's memory capacity. I know that vmware has really sophisticated memory management within virtual machines, but I do not understand how the vCenter can allow me even to power on the virtual machines that exceed the critical memory level, when the host failover can be still handled. Is it due to the fact that virtual machines does not use the memory, so that it is still considered as free, so virtual machines can be powered on ? But what would happen if all VMs would be really using the RAM before the host failure - they could not be migrated to other hosts after the failure. The default behaviour in XenServer is that, it automatically calculates the maximum memory level that can be used within the cluster so that the host failure is still protected. Vmware does the same thing ? The admission policy is enabled. Vmware HA enabled.

  Read the article

< Previous Page | 581 582 583 584 585 586 587 588 589 590 591 592  | Next Page >