Search Results

Search found 44742 results on 1790 pages for 'create'.

Page 586/1790 | < Previous Page | 582 583 584 585 586 587 588 589 590 591 592 593  | Next Page >

• Stubbing an ActsAs Rails Plugin

  - by Rabbott

  I need to create a plugin much like Authlogic (or even just add on to Authlogic), but due to requirements beyond my control I need my plugin to authenticate using SOAP. Basically the plugin would require that anyone accessing the controller (before_filter would be fine) would have to authenticate first. I have ZERO control over the login page, or the SOAP server, I am simply a client attempting to authenticate to the providers SOAP Web Service. Here is what happens.. before_filter realizes that no session[:credential] is set, and forwards the user to the url on the providers servers. The user enters their credentials, and once authenticated, the web service forwards the user to a URL that has been entered by their sysadmins, attaching a token to the url on its way back. I need to take that token, append it to some parameters stored in a local YAML file, and make the SOAP call to the providers server. If all goes as planned, I need to set session[:credential] to the result of the SOAP call, and forward the user to the root page. Subsequent calls to the before_filter will not make the SOAP call, because session[:credential] is set. Ideally I think this would be awesome to slap on top of Authlogic, but I'm not sure how to do this, So I started to create my own acts_as_soap_authentic plugin, which isn't causing errors, but doesn't do anything.. Anyone have any pointers, or tips as to how I can get the ball rolling here? It seems simple, but is proving not to be..

  Read the article

• Convert SQL with Inner AND Outer Join to L2S

  - by Refracted Paladin

  I need to convert the below Sproc to a Linq query. At the very bottom is what I have so far. For reference the fields behind the "splat"(not my sproc) are ImmunizationID int, HAReviewID int, ImmunizationMaintID int, ImmunizationOther varchar(50), ImmunizationDate smalldatetime, ImmunizationReasonID int The first two are PK and FK, respectively. The other two ints are linke to the Maint Table where there description is stored. That is what I am stuck on, the INNER JOIN AND the LEFT OUTER JOIN Thanks, SELECT tblHAReviewImmunizations.*, tblMaintItem.ItemDescription, tblMaintItem2.ItemDescription as Reason FROM dbo.tblHAReviewImmunizations INNER JOIN dbo.tblMaintItem ON dbo.tblHAReviewImmunizations.ImmunizationMaintID = dbo.tblMaintItem.ItemID LEFT OUTER JOIN dbo.tblMaintItem as tblMaintItem2 ON dbo.tblHAReviewImmunizations.ImmunizationReasonID = tblMaintItem2.ItemID WHERE HAReviewID = @haReviewID My attempt so far -- public static DataTable GetImmunizations(int haReviewID) { using (var context = McpDataContext.Create()) { var currentImmunizations = from haReviewImmunization in context.tblHAReviewImmunizations where haReviewImmunization.HAReviewID == haReviewID join maintItem in context.tblMaintItems on haReviewImmunization.ImmunizationReasonID equals maintItem.ItemID into g from maintItem in g.DefaultIfEmpty() let Immunization = GetImmunizationNameByID( haReviewImmunization.ImmunizationMaintID) select new { haReviewImmunization.ImmunizationDate, haReviewImmunization.ImmunizationOther, Immunization, Reason = maintItem == null ? " " : maintItem.ItemDescription }; return currentImmunizations.CopyLinqToDataTable(); } } private static string GetImmunizationNameByID(int? immunizationID) { using (var context = McpDataContext.Create()) { var domainName = from maintItem in context.tblMaintItems where maintItem.ItemID == immunizationID select maintItem.ItemDescription; return domainName.SingleOrDefault(); } }

  Read the article

• Why does stored procedure invalidate SQL Cache Dependency?

  - by Fabio Milheiro

  After many hours, I finally realize that I am working correctly with the Cache object in my ASP.NET application but my stored procedures stops it from working correctly. This stored procedure works correctly: CREATE PROCEDURE [dbo].[ListLanguages] @Page INT = 1, @ItemsPerPage INT = 10, @OrderBy NVARCHAR (100) = 'ID', @OrderDirection NVARCHAR(4) = 'DESC' AS BEGIN SELECT ID, [Name], Flag, IsDefault FROM dbo.Languages END But this (the one I wanted) doesn't: CREATE PROCEDURE [dbo].[ListLanguages] @Page INT = 1, @ItemsPerPage INT = 10, @OrderBy NVARCHAR (100) = 'ID', @OrderDirection NVARCHAR(4) = 'DESC', @TotalRecords INT OUTPUT AS BEGIN SET @TotalRecords = 10 EXEC('SELECT ID, Name, Flag, IsDefault FROM ( SELECT ROW_NUMBER() OVER (ORDER BY ' + @OrderBy + ' ' + @OrderDirection + ') as Row, ID, Name, Flag, IsDefault FROM dbo.Languages) results WHERE Row BETWEEN ((' + @Page + '-1)*' + @ItemsPerPage + '+1) AND (' + @Page + '*' + @ItemsPerPage + ')') END I gave the @TotalRecords parameter the value 10 so you can be sure that the problem is not from the COUNT(*) function which I know is not supported well. Also, when I run it from SQL Server Management Studio, it does exactly what it should do. In the ASP.NET application the results are retrieved correctly, only the cache is somehow unable to work! Can you please help? Maybe a hint I believe that the reason why the dependency HasChanged property is related to the fact that the column Row generated from the ROW_NUMBER is only temporary and, therefore, the SQL SERVER is not able to to say whether the results are changed or not. That's why HasChanged is always set to true. Does anyone know how to paginate results from SQL SERVER without using COUNT or ROW_NUMBER functions?

  Read the article

• NULL-keys for key/value table

  - by user72185

  (Using Oracle) I have a table with key/value pairs like this: create table MESSAGE_INDEX ( KEY VARCHAR2(256) not null, VALUE VARCHAR2(4000) not null, MESSAGE_ID NUMBER not null ) I now want to find all the messages where key = 'someKey' and value is 'val1', 'val2' or 'val3' - OR value is null in which case there will be no entry in the table at all. This is to save space; there would be a large number of keys with null values if I stored them all. I think this works: SELECT message_id FROM message_index idx WHERE ((key = 'someKey' AND value IN ('val1', 'val2', 'val3')) OR NOT EXISTS (SELECT 1 FROM message_index WHERE key = 'someKey' AND idx.message_id = message_id)) But is is extremely slow. Takes 8 seconds with 700K records in message_index and there will be many more records and more search criteria when moving outside of my test environment. Primary key is key, value, message_id: add constraint PK_KEY_VALUE primary key (KEY, VALUE, MESSAGE_ID) And I added another index for message_id, to speed up searching for missing keys: create index IDX_MESSAGE_ID on MESSAGE_INDEX (MESSAGE_ID) I will be doing several of these key/value lookups in every search, not just one as shown above. So far I am doing them nested, where output id's of one level is the input to the next. E.g.: SELECT message_id from message_index WHERE (key/value compare) AND message_id IN ( SELECT ... and so on ) What can I do to speed this up?

  Read the article

• How to get the Video-ID of a just uploaded Youtube movie

  - by murze

  Hi, how can i get the video-id of a just uploaded Youtube movie? I'm using this code: $yt = new Zend_Gdata_YouTube($httpClient); // create a new Zend_Gdata_YouTube_VideoEntry object $myVideoEntry = new Zend_Gdata_YouTube_VideoEntry(); // create a new Zend_Gdata_App_MediaFileSource object $filesource = $yt->newMediaFileSource('mytestmovie.mov'); $filesource->setContentType('video/quicktime'); // set slug header $filesource->setSlug('mytestmovie.mov'); // add the filesource to the video entry $myVideoEntry->setMediaSource($filesource); $myVideoEntry->setVideoTitle('My Test Movie'); $myVideoEntry->setVideoDescription('My Test Movie'); $myVideoEntry->setVideoCategory('Comedy'); // Note that category must be a valid YouTube category ! // set keywords, please note that this must be a comma separated string // and that each keyword cannot contain whitespace $myVideoEntry->setVideoTags('cars, funny'); // upload URI for the currently authenticated user $uploadUrl = 'http://uploads.gdata.youtube.com/feeds/api/users/default/uploads'; // try to upload the video, catching a Zend_Gdata_App_HttpException if available // or just a regular Zend_Gdata_App_Exception try { $newEntry = $yt->insertEntry($myVideoEntry, $uploadUrl, 'Zend_Gdata_YouTube_VideoEntry'); } catch (Zend_Gdata_App_HttpException $httpException) { echo $httpException->getRawResponseBody(); } catch (Zend_Gdata_App_Exception $e) { echo $e->getMessage(); } I assume it 'll be a property of $newEntry but i can't seem to find it! Thanks!

  Read the article

• Go for Zend framework or Django for a modular web application?

  - by dr. squid

  I am using both Zend framework and Django, and they both have they strengths and weakness, but they are both good framworks in their own way. I do want to create a highly modular web application, like this example: modules: Admin cms articles sections ... ... ... I also want all modules to be self contained with all confid and template files. I have been looking into a way to solve this is zend the last days, but adding one omer level to the module setup doesn't feel right. I am sure this could be done, but should I? I have also included Doctrine to my zend application that could give me even more problems in my module setup! When we are talking about Django this is easy to implement (Easy as in concept, not in implementation time or whatever) and a great way to create web apps. But one of the downsides of Django is the web hosing part. There are some web hosts offering Django support, but not that many.. So then I guess the question is what have the most value; rapid modular development versus hosting options! Well, comments are welcome! Thanks

  Read the article

• Minimal deployment of couchdb on windows

  - by MartinStettner

  Hi, I'd like to use couchdb for a client-only application on Windows (the document-oriented structure and the synchronization features would be perfect for me). There is a Windows installer package here, but the installer itself has about 45 MB, when installed it takes more than 100 MB on my HD. This is far to much for my (relatively small) application. I noticed that there are a lot of "src" directories in the couchdb/lib subdirs. I've been experimenting with removing some of them and it didn't seem to break the system. Now I'm wondering what would be the "minimal" set of files (preferably binary-only) that would be needed in order to run a local couchdb server. Are there already any efforts to create such a deployment-friendly installer? Or could anyone give some (even very general) hints how to create it? How much disk space would be minimally required for such an installation? Needless to say that I'm not at all familiar with neither the couchdb internals nor the Erlang system :). But perhaps I could figure out if I got some direction (or I could stop trying if someone told me that this would be impossible or didn't make sense at all ...) Thanks anyway!

  Read the article

• javascript exceed timeout

  - by user1866265

  I use jquery to develop mobile application, here is my code below the problem that when I add 5 or 6 line to the page contained all goes well. but if I add multiple line displays error message: Javascript execution exeeded timeout. function succes_recu_list_rubrique(tx, results) //apés avoire remplir sqlite { console.log('ENTRééééééééééééééé---') $('#lbtn').prepend("<legend>Selectionner un Rubrique</legend><br>"); for( var i=0; i<results.rows.length; i++ ) //Remplir tableau liste des identifiants étapes { $('#lbtn').append("<input name='opt1' checked type='radio' value="+results.rows.item(i).IdRubrique+" id="+results.rows.item(i).IdRubrique+" />"); $('#lbtn').append('<label for='+results.rows.item(i).IdRubrique+'>'+results.rows.item(i).LibelleRubrique+'</label>'); } $('#lbtn').append('<a href="#page_dialog2" class="offer2" data-rel="dialog" data-role="button" >Consulter</a>').trigger('create'); $('#lbtn').append('<a href="#'+id_grp_rub+'" data-role="button" data-rel="back" data-theme="c" >Cancel</a> ').trigger('create'); }

  Read the article

• Generating SQL change scripts in SSMS 2008

  - by Munish Goyal

  I have gone through many related SO threads and got some basic info. Already generated DB diagram. After that i am unable to find a button/option to generate SQL scripts (create) for all the tables in diagram. "Generate script" button is disabled, even on clicking the table in diagram. However i enabled the auto-generate option in tools-designer. But what to do with previous diagrams. I just want an easy way to auto-generate such scripts (create/alter) and would be gud if i get auto-generated stored procs for insert/selects/update etc. EDIT: I could do generate scripts for DB objects. Now: 1. How to import DB diagram from another DB. 2. How to generate (and manage their change integrated with VS source control) routine stored-procs like insert, update and select. Ok let me ask another way, can experts guide on the usual flow of creating/altering tables (across releases), creating stored-procs (are stored-procs the best way to go ?) and their change-management using SSMS design tools and minimal effort ?

  Read the article

• Foreign key not working in MySQL: Why can I INSERT a value that's not in the foreign column?

  - by stalepretzel

  I've created a table in MySQL: CREATE TABLE actions ( A_id int NOT NULL AUTO_INCREMENT, type ENUM('rate','report','submit','edit','delete') NOT NULL, Q_id int NOT NULL, U_id int NOT NULL, date DATE NOT NULL, time TIME NOT NULL, rate tinyint(1), PRIMARY KEY (A_id), CONSTRAINT fk_Question FOREIGN KEY (Q_id) REFERENCES questions(P_id), CONSTRAINT fk_User FOREIGN KEY (U_id) REFERENCES users(P_id)); This created the table I wanted just fine (although a "DESCRIBE actions;" command showed me that the foreign keys were keys of type MUL, and I'm not sure what this means). However, when I try to enter a Q_id or a U_id that does not exist in the questions or users tables, MySQL still allows these values. What did I do wrong? How can I prevent a table with a foreign key from accepting invalid data? If I add TYPE=InnoDB to the end, I get an error: ERROR 1005 (HY000): Can't create table './quotes/actions.frm' (errno: 150) Why might that happen? I'm told that it's important to enforce data integrity with functional foreign keys, but also that InnoDB should not be used with MySQL. What do you recommend?

  Read the article

• Access denied for pdf to read using itextsharp at server level..

  - by apekshabs

  Am facing error after uploadind to server... as access denied .... can anyone help me.... Document myDocument = new Document(PageSize.A5, 26, 72, 180, 180); string strUniqueFn = "onlineinvoice.pdf"; string imgpath = "logo.gif"; string strUser = Thread.CurrentPrincipal.Identity.Name.Substring(Thread.CurrentPrincipal.Identity.Name.IndexOf("\\") + 1).ToUpper(); string strFolder = Server.MapPath("."); System.IO.DirectoryInfo di = new System.IO.DirectoryInfo(strFolder); System.IO.FileInfo[] fi = di.GetFiles(strUser + "*.*"); for (i = 0; i <= fi.Length - 1; i++) { System.IO.File.Delete(strFolder + "\\" + strUniqueFn); } string strPath = strFolder + "\\" + strUniqueFn; PdfWriter pdfw = PdfWriter.GetInstance(myDocument, new FileStream(strPath, FileMode.Create)); string iPath = strFolder + "\\" + imgpath; pdfw.CloseStream = false; myDocument.Open(); ...................... myDocument.Close(); Am facing error at PdfWriter pdfw = PdfWriter.GetInstance(myDocument, new FileStream(strPath, FileMode.Create)); can anyone help me... Thank you

  Read the article

• Delphi : Handling the fact that Strings are not Objects

  - by awmross

  I am trying to write a function that takes any TList and returns a String representation of all the elements of the TList. I tried a function like so function ListToString(list:TList<TObject>):String; This works fine, except you can't pass a TList to it. E2010 Incompatible types: 'TList<System.TObject>' and 'TList<System.string>' In Delphi, a String is not an Object. To solve this, I've written a second function: function StringListToString(list:TList<string>):String; Is this the only solution? Are there other ways to treat a String as more 'object-like'? In a similar vein, I also wanted to write an 'equals' function to compare two TLists. Again I run into the same problem function AreListsEqual(list1:TList<TObject>; list2:TList<TObject>):boolean; Is there any way to write this function (perhaps using generics?) so it can also handle a TList? Are there any other tricks or 'best practises' I should know about when trying to create code that handles both Strings and Objects? Or do I just create two versions of every function? Can generics help? I am from a Java background but now work in Delphi. It seems they are lately adding a lot of things to Delphi from the Java world (or perhaps the C# world, which copied them from Java). Like adding equals() and hashcode() to TObject, and creating a generic Collections framework etc. I'm wondering if these additions are very practical if you can't use Strings with them.

  Read the article

• How to preserve order of temp table rows when inner joined with another table?

  - by Triynko

  Does an SQL Server "join" preserve any kind of row order consistently (i.e. that of the left table or that of the right table)? Psuedocode: create table #p (personid bigint); foreach (id in personid_list) insert into #p (personid) values (id) select id from users inner join #p on users.personid = #p.id Suppose I have a list of IDs that correspond to person entries. Each of those IDs may correspond to zero or more user accounts (since each person can have multiple accounts). To quickly select columns from the users table, I populate a temp table with person ids, then inner join it with the users table. I'm looking for an efficient way to ensure that the order of the results in the join matches the order of the ids as they were inserted into the temp table, so that the user list that's returned is in the same order as the person list as it was entered. I've considered the following alternatives: using "#p inner join users", in case the left table's order is preserved using "#p left join users where id is not null", in case a left join preserves order and the inner join doesn't using "create table (rownum int, personid bigint)", inserting an incrementing row number as the temp table is populated, so the results can be ordered by rownum in the join using an SQL Server equivalent of the "order by order of [tablename]" clause available in DB2 I'm currently using option 3, and it works... but I hate the idea of using an order by clause for something that's already ordered. I just don't know if the temp table preserves the order in which the rows were inserted or how the join operates and what order the results come out in.

  Read the article

• questions about using svn

  - by ajsie

  i have set up a svn repository in a remote ubuntu server using webdav (http://ip/svn). but i have some questions: should i create one svn repository for each project folder? so i should use "svnadmin create" 5 times for 5 projects? or should i import them to seperate folders in the svn repository? should i after i have created a svn repo, import one project folder into it with "svn import" and then DELETE my original local folder thus only having it in the svn repo in the remote ubuntu server? is this safe or should i still have a local copy for some reason (cause i wont work in that one)? i use netbeans to check out projects from svn repo, then i edit the files and commit the changes. but how should i do to update the live web server content (in /var/www)? should i in my ubuntu server use "svn checkout" and check it out to /var/www or should i use netbeans to check out to a local folder and then upload the files to /var/www with ftp or webdav (and which one of them should i use)? so i got a svn repo and lets say 4 programmers are working with it, checking out and commiting. how do i check what is happening in the repo, which one made which changes, and all the changes from day 1 to day 213? does netbeans/eclipse letting me see this kind of information or do i download another application for it? i should have one svn user for each programmer in the ubuntu server? is this accomplished by using "htpasswd" 4 times for 4 programmers? how do i couple all these users to same group so that i could modify file access specific for the svn group and all its members?

  Read the article

• How to Make a DVCS Completely Interoperable with Subversion?

  - by David M

  What architectural changes would a DVCS need to be completely interoperable with Subversion? Many DVCSs have some kind of bidirectional interface with Subversion, but there are limitations and caveats. For instance, git-svn can create a repository that mirrors Subversion, and changes to that repo can be sent back to Subversion via 'dcommit'. But the git-svn manpage explicitly cautions against making clones of that repository, so essentially, it's a Subversion working copy that you can use git commands on. Bazaar has a bidirectional Subversion capability too, but its documentation notes that Subversion properties aren't supported at all. Here's the end that I'm pursuing. I want a Subversion repository and a DVCS repository that, in the steady state, have identical content. When something is changed on one, it's automatically mirrored to the other. Subversion users interact with the Subversion repository normally. DVCS users clone the DVCS repository, pull changes from it, and push changes back to it. Most importantly, they don't need to know that this special DVCS repository is associated with a Subversion repository. It would probably be nifty if any clone of the special repository is itself a special repository and could commit directly to Subversion, but it might be sufficient if only the special repository directly interacts with Subversion. I think that's what mostly needed is to improve the bidirectional capability so that changes to Subversion properties are translated to changes in the DVCS repository. Some changes in the DVCS repository would be translated to changes to Subversion properties. Or is the answer to create a new capability in Subversion that interacts with a DVCS repository, using the DVCS repository as just a special storage layer such as fsfs or bdb? If there's not a direct mapping between the things that Subversion and a DVCS regard as having versions, does that imply that there's always going to be some activity that cannot be recorded properly on one or the other?

  Read the article

• Javascript Rich Display WYSIWYG Component/Methodology

  - by Laramie

  quick back story-- I am working on ASP.Net based template editor that lets authors create text templates using Javascript inserted placeholder tags that will be filled in with dynamic text when the templates are used to display the final results. For example the author might create a template like The word [%12#add] was generated dynamically. The application would eventually replace the tag with a dynamic word down the road (though it's not specifically relevant to this post) The word foo was generated dynmamically. Depending on the circumstances, the template may be created in a text input, textarea or a modified version of the Ajax Control Toolkit HTML Editor. There might be 40 or more of these editable elements on the page, so using lots of stripped down or modified HTML editors would probably bog the page down too much. The problem is that the tags such as [%12#add] are displayed inline with the user text and the result is confusing and aesthetically gross. The goal is parse the contens of the source element and when a tags such as [%12#add] are encountered, display something prettier and less cryptic to the user such as a stylable element or image wherever tags such as [%12#add] occur. The application still needs the template text with the tags on postback. So the user might see The word tag placeholder was generated dynamically. but the original template would still be the value of the text input box The word [%12#add] was generated dynamically. It seems HTML editors like the ACT version and FckEditor accomplish this by rendering their output in an IFrame, but rather than kill myself trying to roll a lighter specialized version myself, I thought I'd ask if anyone knows of an existing free component or approach that has already tackled this. With good reason, I don't think S.O. allows HTML formatting, but the bold "tag placeholder" above would ideally be something like tag placeholder.

  Read the article

• How to initialize audio with Vala/SDL

  - by ioev

  I've been trying to figure this out for a few hours now. In order to start up the audio, I need to create an SDL.AudioSpec object and pass it to SDL.Audio.Open. The problem is, AudioSpec is a class with a private constructor, so when I try to create one I get: sdl.vala:18.25-18.43: error: `SDL.AudioSpec' does not have a default constructor AudioSpec audiospec = new SDL.AudioSpec(); ^^^^^^^^^^^^^^^^^^^ And if I try to just assign values to it's member vars like a struct (it's a struct in normal sdl) I get: sdl.vala:20.3-20.25: error: use of possibly unassigned local variable `audiospec' audiospec.freq = 22050; ^^^^^^^^^^^^^^^^^^^^^^^ I found the valac doc here: http://valadoc.org/sdl/SDL.AudioSpec.html But it isn't much help at all. The offending code block looks like this: // setup the audio configuration AudioSpec audiospec; AudioSpec specback; audiospec.freq = 22050; audiospec.format = SDL.AudioFormat.S16LSB; audiospec.channels = 2; audiospec.samples = 512; // try to initialize sound with these values if (SDL.Audio.open(audiospec, specback) < 0) { stdout.printf("ERROR! Check audio settings!\n"); return 1; } Any help would be greatly appreciated!

  Read the article

• Apply a Quartz filter while saving PDF under Mac OS X 10.6.3

  - by olpa

  Using Mac OS X API, I'm trying to save a PDF file with a Quartz filter applied, just like it is possible from the "Save As" dialog in the Preview application. So far I've written the following code (using Python and pyObjC, but it isn't important for me): -- filter-pdf.py: begin from Foundation import * from Quartz import * import objc page_rect = CGRectMake (0, 0, 612, 792) fdict = NSDictionary.dictionaryWithContentsOfFile_("/System/Library/Filters/Blue \ Tone.qfilter") in_pdf = CGPDFDocumentCreateWithProvider(CGDataProviderCreateWithFilename ("test .pdf")) url = CFURLCreateWithFileSystemPath(None, "test_out.pdf", kCFURLPOSIXPathStyle, False) c = CGPDFContextCreateWithURL(url, page_rect, fdict) np = CGPDFDocumentGetNumberOfPages(in_pdf) for ip in range (1, np+1): page = CGPDFDocumentGetPage(in_pdf, ip) r = CGPDFPageGetBoxRect(page, kCGPDFMediaBox) CGContextBeginPage(c, r) CGContextDrawPDFPage(c, page) CGContextEndPage(c) -- filter-pdf.py: end Unfortunalte, the filter "Blue Tone" isn't applied, the output PDF looks exactly as the input PDF. Question: what I missed? How to apply a filter? Well, the documentation doesn't promise that such way of creating and using "fdict" should cause that the filter is applied. But I just rewritten (as far as I can) sample code /Developer/Examples/Quartz/Python/filter-pdf.py, which was distributed with older versions of Mac (meanwhile, this code doesn't work too): ----- filter-pdf-old.py: begin from CoreGraphics import * import sys, os, math, getopt, string def usage (): print ''' usage: python filter-pdf.py FILTER INPUT-PDF OUTPUT-PDF Apply a ColorSync Filter to a PDF document. ''' def main (): page_rect = CGRectMake (0, 0, 612, 792) try: opts,args = getopt.getopt (sys.argv[1:], '', []) except getopt.GetoptError: usage () sys.exit (1) if len (args) != 3: usage () sys.exit (1) filter = CGContextFilterCreateDictionary (args[0]) if not filter: print 'Unable to create context filter' sys.exit (1) pdf = CGPDFDocumentCreateWithProvider (CGDataProviderCreateWithFilename (args[1])) if not pdf: print 'Unable to open input file' sys.exit (1) c = CGPDFContextCreateWithFilename (args[2], page_rect, filter) if not c: print 'Unable to create output context' sys.exit (1) for p in range (1, pdf.getNumberOfPages () + 1): #r = pdf.getMediaBox (p) r = pdf.getPage(p).getBoxRect(p) c.beginPage (r) c.drawPDFDocument (r, pdf, p) c.endPage () c.finish () if __name__ == '__main__': main () ----- filter-pdf-old.py: end

  Read the article

• Password hashing, salt and storage of hashed values

  - by Jonathan Leffler

  Suppose you were at liberty to decide how hashed passwords were to be stored in a DBMS. Are there obvious weaknesses in a scheme like this one? To create the hash value stored in the DBMS, take: A value that is unique to the DBMS server instance as part of the salt, And the username as a second part of the salt, And create the concatenation of the salt with the actual password, And hash the whole string using the SHA-256 algorithm, And store the result in the DBMS. This would mean that anyone wanting to come up with a collision should have to do the work separately for each user name and each DBMS server instance separately. I'd plan to keep the actual hash mechanism somewhat flexible to allow for the use of the new NIST standard hash algorithm (SHA-3) that is still being worked on. The 'value that is unique to the DBMS server instance' need not be secret - though it wouldn't be divulged casually. The intention is to ensure that if someone uses the same password in different DBMS server instances, the recorded hashes would be different. Likewise, the user name would not be secret - just the password proper. Would there be any advantage to having the password first and the user name and 'unique value' second, or any other permutation of the three sources of data? Or what about interleaving the strings? Do I need to add (and record) a random salt value (per password) as well as the information above? (Advantage: the user can re-use a password and still, probably, get a different hash recorded in the database. Disadvantage: the salt has to be recorded. I suspect the advantage considerably outweighs the disadvantage.) There are quite a lot of related SO questions - this list is unlikely to be comprehensive: Encrypting/Hashing plain text passwords in database Secure hash and salt for PHP passwords The necessity of hiding the salt for a hash Clients-side MD5 hash with time salt Simple password encryption Salt generation and Open Source software I think that the answers to these questions support my algorithm (though if you simply use a random salt, then the 'unique value per server' and username components are less important).

  Read the article

• lost session after redirect_to

  - by PeterWong

  I encountered a strange performance in my current project, which is about session. The strange part is it was normal in Safari but failed in other browsers (includes chrome, firefox and opera). There is a registration form for input of part of the key information (email, password, etc) and is submitted to an action called "create" This is the basic code of create action: @account = Account.new(params[:account]) if @account.save ApplicationController.current_account = @account session[:current_account] = ApplicationController.current_account session[:account] = ApplicationController.current_account.id email = @account.email Mailer.deliver_account_confirmation(email) flash[:type] = "success" flash[:notice] = "Successfully Created Account" redirect_to :controller => "accounts", :action => "create_step_2" else flash[:type] = "error" flash[:title] = "Oops, something wasn't right." flash[:notice] = "Mistakes are marked below in red. Please fix them and resubmit the form. Thanks." render :action => "new" end Also I created a before_filter in the application controller, which has the following code: ApplicationController.current_account = Account.find_by_id(session[:current_account].id) unless session[:current_account].blank? For Safari, there is no any problem. But for the other browsers, the session[:current_account] does not exist and so produced the following error message: RuntimeError in AccountsController#create_step_2 Called id for nil, which would mistakenly be 4 -- if you really wanted the id of nil, use object_id Please could anyone help me?

  Read the article

• ExtJS 4 Chart Axis Display Issue in Chrome

  - by SerEnder

  I've run into an issue while using ExtJS 4.0.7. I'm trying to display a chart with two series on a Numeric/Category Chart. The chart displays correctly in Firefox, but while using Chrome (18.0.1025.142) the x axis labels are either all stacked upon each or else (when using rotate) rendered behind the chart in the specified angle. Any ideas would be appreciated. Screen shot in Firefox: Screen Shot in Chrome: And the code that's used to generate both: Ext.require(['Ext.chart.*']); Ext.onReady(function() { var iChartWidth = 800; // Defines chart width var iChartHeight = 550; // Defines chart height Ext.define('RulesCreatedModel',{ extend:'Ext.data.Model', fields:[ {name:'sHourName', type:'string'}, {name:'User_2', type:'number'}, {name:'User_1', type:'number'}, ] }); var RulesCreatedStore = Ext.create('Ext.data.Store',{ id:'RulesCreatedStore', model:'RulesCreateModel', fields: [ 'sHourName','dayNum','hour','User_2','User_1'], data:[{ 'sHourName':'3pm', 'User_1':82, 'User_2':56 },{ 'sHourName':'4pm', 'User_1':39, 'User_2':44 },{ 'sHourName':'5pm', 'User_1':80, 'User_2':14 },{ 'sHourName':'6pm', 'User_1':55, 'User_2':0, },{ 'sHourName':'7pm', 'User_1':36, 'User_2':0, },{ 'sHourName':'8pm', 'User_1':66, 'User_2':0 },{ 'sHourName':'9pm', 'User_1':39, 'User_2':0, },{ 'sHourName':'10pm', 'User_1':0, 'User_2':0 },{ 'sHourName':'11pm', 'User_1':0, 'User_2':0 },{ 'sHourName':'12am', 'User_1':0, 'User_2':0 },{ 'sHourName':'1am', 'User_1':0, 'User_2':0 },{ 'sHourName':'2am', 'User_1':0, 'User_2':0 },{ 'sHourName':'3am', 'User_1':0, 'User_2':0 },{ 'sHourName':'4am', 'User_1':0, 'User_2':0 },{ 'sHourName':'5am', 'User_1':0, 'User_2':0 },{ 'sHourName':'6am', 'User_1':0, 'User_2':0 },{ 'sHourName':'7am', 'User_1':0, 'User_2':1 },{ 'sHourName':'8am', 'User_1':0, 'User_2':99 },{ 'sHourName':'9am', 'User_1':0, 'User_2':28 },{ 'sHourName':'10am', 'User_1':0, 'User_2':28 },{ 'sHourName':'11am', 'User_1':0, 'User_2':153 },{ 'sHourName':'12pm', 'User_1':0, 'User_2':58 },{ 'sHourName':'1pm', 'User_1':0, 'User_2':42 },{ 'sHourName':'2pm', 'User_1':20, 'User_2':10 }] }); Ext.create('Ext.chart.Chart',{ id: 'RulesWrittenChart', renderTo: 'StatCharts_Display', width: iChartWidth, height: iChartHeight, animate: true, store: RulesCreatedStore, axes: [{ type: 'Numeric', position: 'left', fields: ['User_2','User_1'], title: 'Rules Written', grid: true },{ type: 'Category', position: 'bottom', fields: ['sHourName'], title: 'Hour', grid: false, label: { rotate: { degrees: 315 } } }], series: [{ type: 'line', axis: 'left', xField: 'sHourName', yField: 'User_2', highlight: { size: 3, radius: 3 } },{ type: 'line', axis: 'left', xField: 'sHourName', yField: 'User_1', highlight: { size: 3, radius: 3 } }] }); });

  Read the article

• missing rake tasks ??

  - by richard moss

  hi I have ran gem install rails and am running 2.3.4 but i am missing some rake tasks like 'db' and 'gems' if i run rake -T i get the following tasks. How can i get all the others ? rake apache2 # Build Apache 2 module rake clean # Remove compiled files rake clobber # Remove all generated files rake default # Build everything rake doc # Generate all documentation rake doxygen # Generate Doxygen C++ API documentation if ... rake doxygen:clobber # Remove generated Doxygen C++ API documenta... rake doxygen:force # Force generation of Doxygen C++ API docume... rake fakeroot # Create a fakeroot, useful for building nat... rake nginx # Build Nginx helper server rake package # Build all the packages rake package:clean # Remove package products rake package:debian # Create a Debian package rake package:force # Force a rebuild of the package files rake package:gem # Build the gem file passenger-2.2.4.gem rake rdoc # Build the rdoc HTML Files rake rdoc:clobber # Remove rdoc products rake rdoc:force # Force a rebuild of the RDOC files rake sloccount # Run 'sloccount' to see how much code Passe... rake test # Run all unit tests and integration tests rake test:cxx # Run unit tests for the Apache 2 and Nginx ... rake test:integration # Run all integration tests rake test:integration:apache2 # Run Apache 2 integration tests rake test:integration:nginx # Run Nginx integration tests rake test:oxt # Run unit tests for the OXT library rake test:rcov # Run coverage tests for the Ruby libraries rake test:restart # Run the 'restart' integration test infinit... rake test:ruby If anyone knows why this has happened, how i can fix it or anything else that could help, please let me know thanks alot rick

  Read the article

• How to use a loop to download HTML with paging?

  - by Nai

  I want to loop through this URL and download the HTML. https://www.googleapis.com/customsearch/v1?key=AIzaSyAAoPQprb6aAV-AfuVjoCdErKTiJHn-4uI&cx=017576662512468239146:omuauf_lfve&q=" + searchTermFormat + "&num=10" +"&start=" + i start and num controls the paging of the URL. So if &start=2, and &num=10, it will scrape 10 results from page 2. Given that Google has a max limit of num = 10, how can I write a loop that loops through the HTML and scrape the results for the first 10 pages? This is what I have so far which just scrapes the first page. //input search term Console.WriteLine("What is your search query?:"); string searchTerm = Console.ReadLine(); //concantenate the strings using + symbol to make it URL friendly for google string searchTermFormat = searchTerm.Replace(" ", "+"); //create a new instance of Webclient and use DownloadString method from the Webclient class to extract download html WebClient client = new WebClient(); int i = 1; string Json = client.DownloadString("https://www.googleapis.com/customsearch/v1?key=AIzaSyAAoPQprb6aAV-AfuVjoCdErKTiJHn-4uI&cx=017576662512468239146:omuauf_lfve&q=" + searchTermFormat + "&num=10" + "&start=" + i); //create a new instance of JavaScriptSerializer and deserialise the desired content JavaScriptSerializer js = new JavaScriptSerializer(); GoogleSearchResults results = js.Deserialize<GoogleSearchResults>(Json); //output results to console Console.WriteLine(js.Serialize(results)); Console.ReadLine();

  Read the article

• Is there a way to toggle bluetooth and/or wifi on and off programatically in iOS?

  - by Andy W

  I am looking for an easy way to toggle both bluetooth and wifi between on and off states on iOS 4.x devices (iPhone and iPad). I am constantly toggling these functions as I move between different locations and usage scenarios, and right now it takes multiple taps and visits to the Settings App. I am looking to create a simple App, that lives on Springboard, that I can just tap and it will turn off the wifi if it's on, and vice versa, then immediately quit. Similarly with an App for toggling bluetooth’s state. I have the developer SDK, and am comfortable in Xcode and with iOS development, so am happy to write the required Xcode to create the App. I am just at a loss as to which API, private or not, has the required functionality to simply toggle the state of these facilities. Because this is scratching a very personal itch, I have no intent to try and sell the App or get it up on the App store, so conforming with App guidelines on API usage is a non-issue. What I don’t want to do is jailbreak the devices, as I want to keep the core software as shipped. Can anyone point me at some sample code or more info on achieving this goal, as my Google-fu is letting me down, and if the information is out there for 4.x devices I just can’t find it.

  Read the article

• Cant' cast a class with multiple inheritance

  - by Jay S.

  I am trying to refactor some code while leaving existing functionality in tact. I'm having trouble casting a pointer to an object into a base interface and then getting the derived class out later. The program uses a factory object to create instances of these objects in certain cases. Here are some examples of the classes I'm working with. // This is the one I'm working with now that is causing all the trouble. // Some, but not all methods in NewAbstract and OldAbstract overlap, so I // used virtual inheritance. class MyObject : virtual public NewAbstract, virtual public OldAbstract { ... } // This is what it looked like before class MyObject : public OldAbstract { ... } // This is an example of most other classes that use the base interface class NormalObject : public ISerializable // The two abstract classes. They inherit from the same object. class NewAbstract : public ISerializable { ... } class OldAbstract : public ISerializable { ... } // A factory object used to create instances of ISerializable objects. template<class T> class Factory { public: ... virtual ISerializable* createObject() const { return static_cast<ISerializable*>(new T()); // current factory code } ... } This question has good information on what the different types of casting do, but it's not helping me figure out this situation. Using static_cast and regular casting give me error C2594: 'static_cast': ambiguous conversions from 'MyObject *' to 'ISerializable *'. Using dynamic_cast causes createObject() to return NULL. The NormalObject style classes and the old version of MyObject work with the existing static_cast in the factory. Is there a way to make this cast work? It seems like it should be possible.

  Read the article

< Previous Page | 582 583 584 585 586 587 588 589 590 591 592 593  | Next Page >