Search Results

Search found 23271 results on 931 pages for 'static classes'.

Page 587/931 | < Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >

• Why does my mic boost automatically go to 100 on every boot?

  - by Ben

  When my computer turns on, it automatically sets the "mic boost" sound setting to 100. This causes a loud static sound in my speakers. I can manually go to alsamixer and turn the mic boost down manually, but I would prefer it if I didn't have to do this every time I turn the computer on. I've tried running sudo alsactl store after fixing the settings, and this does save them, but I have to run sudo alsactl restore to restore the settings. This means that I have to manually fix the sound every time I start the computer anyway, so it isn't really a fix. I tried putting sudo alsactl restore in my startup programs, but that didn't seem to fix anything. I'm running Ubuntu 12.04, but I started having this problem before upgrading from 11.10. I'm using a Sony Vaio laptop. I'm not really sure what made it start; it seemed like I just started having the problem randomly one day. Any help would be appreciated! Edit: here is the output from running amixer: http://paste.ubuntu.com/1060080/

  Read the article

• Transparent JPanel, Canvas background in JFrame

  - by Andy Tyurin

  I wanna make canvas background and add some elements on top of it. For this goal I made JPanel as transparent container with setOpaque(false) and added it as first of JFrame container, then I added canvas with black background (in future I wanna set animation) to JFrame as second element. But I can't undestand why i see grey background, not a black. Any suggestions? public class Game extends JFrame { public Container container; //Game container with components public Canvas backgroundLayer; //Background layer of a game public JPanel elementsLayer; //elements panel (top of backgroundLayer), holds different elements private Dimension startGameDimension = new Dimension(800,600); //start game dimension public Game() { //init main window super("Astra LaserForces"); setSize(startGameDimension); setBackground(Color.CYAN); container=getContentPane(); container.setLayout(null); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); //init jpanel elements layer elementsLayer=new JPanel(); elementsLayer.setSize(startGameDimension); elementsLayer.setBackground(Color.BLUE); elementsLayer.setOpaque(false); container.add(elementsLayer); //init canvas background layer backgroundLayer = new Canvas(); backgroundLayer.setSize(startGameDimension); backgroundLayer.setBackground(Color.BLACK); //set default black color container.add(backgroundLayer); } //start game public void start() { setVisible(true); } //create new instance of game and start it public static void main(String[] args) { new Game().start(); } }

  Read the article

• How to switch a Sound Ouput Device before the Mac goes to sleep?

  - by Konzepz

  I've connected my MacBook to a set of external speakers with a USB. Now, every time the computer goes to Sleep Mode, there's an awful static sound coming from the speakers. I guess this is some bad wiring; but that's what I've got. However, I can use an idea for a script (AppleScript, bash, whatever) that will switch off the USB output sound in (System Preferences) before the computer goes to sleep, and will switch it back on (if exists) on Wake. Any ideas? Thanks!

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user51737

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• configuring nginx as reverse proxy

  - by user55714

  This isn't directly passenger related..but I am hoping some of you might have tried this for sure so why not ask. I am using passenger with nginx to serve my rails app on a virtual slice host. I am considering putting a reverse proxy for serving static content as well as handling etagged actions. 1 - Can I use my existing nginx installation and just change it to a reverse proxy? Do I even need a web server? What would a typical architecture look like in this case? nginx rev-proxy - nginx web server - passenger? or nginx rev-proxy - passenger? 2 - Is nginx the best choice in this case? 3 - Can my reverse proxy reside on the same slice? Thanks

  Read the article

• shut down FTP from IIS 6 after <X> failed login attempts

  - by Justin C

  Is there a setting in IIS 6 to turn an FTP site off after a specified number of failed login attempts? It has already been documented on this site that a Windows server sitting on a static IP address can record tens of thousands of failed login attempts a month. One server I maintain has had tens of thousands of attempts made against the FTP port. I have solid passwords in place, so I am not overly concerned. I rarely have to use the FTP, so for the most part I turn it on and off as I need it. Sometimes though I forget to turn it off when I am done, only to find the next day that my EventLog is full of audit failures. I would want to set a high number, in case I just messed up the password. Something like if 50 failed login attempts happen, just turn off the FTP site. Then if I need it later I can just start it again.

  Read the article

• Text on a model

  - by alecnash

  I am trying to put some text on a Model and I want it to be dynamic. Did some research and came up with drawing the text on the texture and then set it on the model. I use something like this: public static Texture2D SpriteFontTextToTexture(SpriteFont font, string text, Color backgroundColor, Color textColor) { Size = font.MeasureString(text); RenderTarget2D renderTarget = new RenderTarget2D(GraphicsDevice, (int)Size.X, (int)Size.Y); GraphicsDevice.SetRenderTarget(renderTarget); GraphicsDevice.Clear(Color.Transparent); Spritbatch.Begin(); //have to redo the ColorTexture Spritbatch.Draw(ColorTexture.Create(GraphicsDevice, 1024, 1024, backgroundColor), Vector2.Zero, Color.White); Spritbatch.DrawString(font, text, Vector2.Zero, textColor); Spritbatch.End(); GraphicsDevice.SetRenderTarget(null); return renderTarget; } When I was working with primitives and not models everything worked fine because I set the texture exactly where I wanted but with the model (RoundedRect 3D button). It now looks like that: Is there a way to have the text centered only on one side?

  Read the article

• How to make local apache server public/visible ?

  - by George

  Hello. I am running an Apache2 server on a Fedora 13. I'd like to make it publicly accessible(visible).For example I'd like when somebody types http://my.ip.numbes/ that they would see what I have in my document root folder. Just for a presentation of a course work at university. Permissions are set to 755. User owning the document root is apache. SELinux is temporarily disabled. But port 80 is closed. I tried to open it by adding an entry to iptables and restarting them, no change. I guess I am missing something big here. Help would be greatly appreciated. Note: I have a static (public, real) IP address.

  Read the article

• What is the best way to auto failover to backup WAN link for web server

  - by user66735

  Hi Iam looking for the best way to ensure my server ( application ) remains available for all my users (on web/LAN/WAN ), when my primary ISP link fails. My server is behind a firewall on which both my primary & secondary links land. I have already assigned multiple IPs (both ISP's static IP) to the 'A' record ( host.example.com ) in the DNS. However in a round robin scenario is there a way I can ensure that my web user will not see a "cannot dislay web page" error ever ?? What are the better methods to achieve this??

  Read the article

• Ubuntu Server 12.04, NAT, Router, DNS. It just doesnt work

  - by Bjørnar Kibsgaard

  I recently inherited some server hardware from work and decided that it could be my main router at home (among other things). Ubuntu 12.04 server installation harware wise goes well and everything is found and working when I boot up. So I begin with setting up eth1 with DHCP. This works fine and it gets a public IP address from my modem and we have a working internet connection. Then I set up my other NIC (eth0) as static (192.168.0.1) and this also works fine. I can access it from other computers in the network. The problems are coming when I am trying to set up a DHCP server with isc-dhcp-server. It seems like it is working and giving the computers IP adresses but after one reboot it stops working. After the reboot eth1 will get a public ip from the modem but it doesnt have internet access. I have to manually run dhcpcd eth1 to get it to work again. As far as I know I havent made any changes to DNS. What am I doing wrong? I have never really had problems with this before. :)

  Read the article

• Windows 2003 - RAS service - VPN client can only connect to server, not internal network

  - by Gk

  Here is my diagram http://imageshack.us/photo/my-images/263/vpnt.png/ Server has two NIC: One connect to Internet, one connect to internal network. RAS service is configured with static IP pool on the same subnet of internal network (10.10.0.x). The problem is when a client connect to server, client can connect to server(10.10.0.10), but cannot connect to another host locate in internal network (10.10.0.11) even cannot ping to 10.10.0.50. RAS configured with IP routing enabled, client connect with options: Use default gateway on remote network. I'm messed up and can not figure out what wrong. Please help me T_T. TIA, giobuon

  Read the article

• Why do most routers not include local DNS?

  - by user785194

  I need to change my firewall/router, and I'd prefer something with built-in DNS to resolve queries on the local subnets. I've got a mixed Linux/Windows system, often with only one computer turned on, and I frequently have problems resolving local names. I don't want to keep a Linux box permanently on just for DNS, and I'd prefer to have DNS in my router appliance, which is always on. I search Google for this occasionally but never find anything. You always get the obvious answers - it's not possible, put everything in /etc/hosts, NetBIOS, dedicated box, etc. So what am I missing? Why don't "cheap" routers let you do this? I'm pretty sure that Cisco kit does this. Almost all cheap routers will let you do MAC address reservation, to let them assign static IP addresses for DHCP. So why can't they simply do DNS as well for everything on the local subnets, just passing through remote domains to the ISP?

  Read the article

• How to make a iOS plugin for Unity3d

  - by DannoEterno

  I've passed last 2 days reading articles and book for understand how can i make a plugin for iOS in Unity. Basically i need just a demo for understand how it work. For now i've tried to make this process (with really poor luck): I've started a new project in Unity and writed a simple script using UnityEngine; using System.Collections; using System; using System.Runtime.InteropServices; public class CallPlugin : MonoBehaviour { [DllImport ("__Internal")] private static extern int test(); void Start () { Debug.Log(test()); } } Then i've created a project in Xcode with this simple script: extern "C"{ int test() { int che = 5; return che; } } Then i've tried: to put the .mm and .h in the Assets/Plugins/iOS = nothing to build the unity project and than add the .h and .mm in the Xcode project = nothing In Unity i will always get the EntryPointNotFoundException, so unity see the file but is unable to reach the method. The problem is... how?! :) Maybe i miss something or i've done something wrong? Thanks a lot for every help that you can give me :)

  Read the article

• Dim (NEARLY blank) laptop screen, secondary screen works - why?

  - by LIttle Ancient Forest Kami

  My laptop screen is (almost) black while my secondary screen is fine. I believe it to be backlight / brightness related. Problem description it starts when I start the laptop system loads and works fine, just screen has problems I can see the screen though very faintly / dimly - it's hard to see anything which ain't very white e.g. starting screen has big Thinkpad logo in white, large font - I can see it, though very dimly second screen works very well Official backligtht debugging: using acpi setting as prescribed there for Thinkpads didn't help I can see an entry in /sys/class/backlight/ and it changes when I press hotkeys for brightness (current backlight power for instance goes up or down) acpi-off didn't helpm neither did acpi_backlight=vendor Hardware data Laptop is Thinkpad Edge with glossy screen. 4 processors, 2 cores, exemplary CPU data from cat /proc/cpuinfo reports Genuine Intel i5 (M 480 @ 2.67GHz). OS is Ubuntu Lucid, 10.04 LTS, 64-bit, with Linux generic kernel (2.6.32-44) and GNOME 2.32.2 (though I doubt there lies the problem). $ lspci | grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] $ lshw -C display *-display description: VGA compatible controller product: M92 [Mobility Radeon HD 4500 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:33 memory:c0000000-dfffffff(prefetchable) ioport:2000(size=256) memory:f0300000-f030ffff memory:f0320000-f033ffff(prefetchable) Driver I was NOT running any proprietary drivers, just checked with "Hardware drivers". There is one for ATI that is suggested there, though I didn't need it so far. UPDATE: changing the driver to proprietary one (ATI/AMD FGLRX) didn't help. Tried and failed Resetting / running on power or battery / charging / getting rid of static electricity / warming up *doesn't help* This is NOT a blank-screen problem, at least it isn't following official Ubuntu black-screen diagnostics - I can see my screen, though barely. What I will try next: - check last updates I've made - IIRC I am running on nomodeset already, but will verify this Any ideas how to proceed best? What is most probable cause?

  Read the article

• Software that can identify and remove foreground objects from image

  - by Antonio2011a

  I am interested in removing extraneous objects from an image. More specifically the situation is that there is a series of images of a particular background. In each image there are objects in the foreground, however these objects differ across the series of images in terms of their location. Note that some objects always exists in the foreground. The background is static. An example might be a busy tourist spot and you want to remove the people or tourist buses from the image. I'd like the software to take the series of images and as much as possible reconstruct the background. Is there software available that has this capability? If so what are the steps necessary to use that functionality? Similarly if anyone knows a lot about image processing, are there any image processing algorithms that could handle this? Thanks.

  Read the article

• Processing files from a Content Distribution Network problem

  - by Derek

  From what I understand that CDNs are meant to physically cache your static files in multiple regions closer to your users. However, I've noticed a few websites that when a page is requested from their server, they grab the asset files from their cdn, process them (compress, minify, etc.) cache the results on their server and then send them to the user requesting the page. This doesn't make too much sense to me. Wouldn't processing the files on your server eliminate the gains from using a cdn? Is this a normal way of doing things, or am I not understanding the whole asset management concept?

  Read the article

• Unable to change IP address for eth0 without restart in Ubuntu

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I tried to change the IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4 auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status When I issue: sudo service networking restart I get this response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart does the IP change. Any ideas?

  Read the article

• Have Free website Hosting with Google App Engine

  - by mickthompson

  I'm reading about Google App Engine. I'm creating a bunch of simple dynamic websites in java. I'm considering to use Google App Engine and setup my clients' website on it. In this way I've only to register a domain www.myclietdomain.com and then point that to the GoogleAppEngine application... In this way I plan to avoid hosting costs. Infact I'm paying even for hosting few static html pages... Do you think that is possible to use Google App Engine for this scope?

  Read the article

• how get collision callback of two specific objects using bullet physics?

  - by sebap123

  I have got problem implementing collision callback into my project. I would like to have detection between two specific objects. I have got normall collision but I want one object to stop or change color or whatever when colides with another. I wrote code from bullet wiki: int numManifolds = dynamicsWorld->getDispatcher()->getNumManifolds(); for (int i=0;i<numManifolds;i++) { btPersistentManifold* contactManifold = dynamicsWorld->getDispatcher()->getManifoldByIndexInternal(i); btCollisionObject* obA = static_cast<btCollisionObject*>(contactManifold->getBody0()); btCollisionObject* obB = static_cast<btCollisionObject*>(contactManifold->getBody1()); int numContacts = contactManifold->getNumContacts(); for (int j=0;j<numContacts;j++) { btManifoldPoint& pt = contactManifold->getContactPoint(j); if (pt.getDistance()<0.f) { const btVector3& ptA = pt.getPositionWorldOnA(); const btVector3& ptB = pt.getPositionWorldOnB(); const btVector3& normalOnB = pt.m_normalWorldOnB; bool x = (ContactProcessedCallback)(pt,fallRigidBody,earthRigidBody); if(x) printf("collision\n"); } } } where fallRigidBody is a dynamic body - a sphere and earthRigiBody is static body - StaticPlaneShape and sphere isn't touching earthRigidBody all the time. I have got also other objects that are colliding with sphere and it works fine. But the program detects collision all the time. It doesn't matter if the objects are or aren't colliding. I have also added after declarations of rigid body: earthRigidBody->setCollisionFlags(earthRigidBody->getCollisionFlags() | btCollisionObject::CF_CUSTOM_MATERIAL_CALLBACK); fallRigidBody->setCollisionFlags(fallRigidBody->getCollisionFlags() | btCollisionObject::CF_CUSTOM_MATERIAL_CALLBACK); So can someone tell me what I am doing wrong? Maybe it is something simple?

  Read the article

• Domain redirection to port on Windows Server 2008

  - by Rauffle

  I have a Windows server running IIS. I wish to run a piece of software that hosts a web interface on a non-standard HTTP port (let's say, port 9999). I have static DNS entries on my router for two FQDNs, both of which direct to the Windows server. I wish to have requests to 'website1' to continue to go to the IIS website on port 80, but requests for 'website2' to instead go to port 9999 to be handled by the other application. How can I accomplish this? Right now I can get to the application by going to 'website1:9999' or 'website2:9999'.

  Read the article

• private subnet nat (openvpn / racoon)

  - by Jonas Schnelli

  I have a openvpn subnet 10.8.0.0/24 running one server and one client (laptop). openvpn works fine. Browsing the web over openvpn from the laptop works also fine. Now on the server there is a private subnet with 10.7.8.128/28. The subnet is set up with racoon (IPSEC s2s vpn). The s2s vpn allows me to access the subnet 10.3.5.0/24 at the other s2s vpn end. Works all fine when I'm connected with ssh to my server. From my laptop i can ping 10.7.8.129 (the servers ipsec local ip) but i cannot reach the net 10.3.5.0/24. I tried to add a static route on my laptop 10.3.5.0/24 over gw 10.7.8.129 with no success. Any ideas how i do setup the nat / routing? Thanks

  Read the article

• Collaborative work (small team) - Best practices

  - by LEM01

  I'm currently working in a very small team of programmers (2-3) and I'm looking for advices/best practices on how to organise our work. We're all working on the same application using PHP. Today we're kind of all working on our way. Today situation: List item that have to be worked on by each dev 1/week. What has to be done is defined at a high functional level (ex: Build the search engine for this product..) Commit / merge our individual branches (git) every week before the next meeting No real dev rules, no code review No test written (aouutch) Problems faced: Code quality issue: discovering someone else code is sometime tough (inline, variable+function+class names, spaces, comments..) Changes in already existing classes (impact on someone else work) Responsibility of each dev unclear: after getting someone else code and discover something messy, should I make the change? Should he make the change? How to plan those things,... What I'm looking for: Basically I'm looking into structuring the way we develop things in order to avoid frustration and improve overall quality. How to define coding standards (naming convention, code rules...)? Do you you any validation script to make sure code is valid before committing? Do you think that defining an architect role in the team is needed? Someone that would actually define what has to be developed during the next phase. By defining interfaces or class descriptions that have to be written. (Does it make sense in such a small team?) Today we're losing time into understanding what others did or tried to do, we're also losing time in discussion like "you should have done it that way! Why is this class doing that and not that..? Shouldn't we have a embedded class rather that this set of data...". I'm looking into a work process, maybe with more defined responsibilities and process in order to improve our performance. If you have experience, advices, best practices or anything to share that we could benefit from it will be much appreciated! Thanks a lot for your time!

  Read the article

• Find possible variations of one item out of multiple baskets.

  - by tugberk

  I have three baskets of balls and each of them has 10 balls which have the following numbers: Basket 1: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Basket 2: 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 Basket 3: 21, 22, 23, 24, 25, 26, 27, 28, 29, 30 What would be the possible variations If I were to pick one ball from each basket? I guess this is called as Probability in Mathematics but not sure. How would you write this code in C# (or any other programming language) to get the correct results? Edit: Based on @Kilian Foth's comment, here is the solution in C#: class Program { static void Main(string[] args) { IEnumerable<string> basket1 = new List<string> { "1", "2", "3", "4", "5", "6", "7", "8", "9", "10" }; IEnumerable<string> basket2 = new List<string> { "11", "12", "13", "14", "15", "16", "17", "18", "19", "20" }; IEnumerable<string> basket3 = new List<string> { "21", "22", "23", "24", "25", "26", "27", "28", "29", "30" }; foreach (var item1 in basket1) foreach (var item2 in basket2) foreach (var item3 in basket3) { Console.WriteLine("{0}, {1}, {2}", item1, item2, item3); } Console.ReadLine(); } }

  Read the article

• Single CAS web application in a cluster

  - by Dolf Dijkstra

  Recently a customer wanted to set up a cluster of CAS nodes to be used together with WebCenter Sites. In the process of setting this up they realized that they needed to create a web application per managed server. They did not want to have this management burden but would like to have one web application deployed to multiple nodes. The reason that there is a need for a unique application per node is that the web-application contains information that needs to be unique per node, the postfix for the ticket id.  My customer would like to externalize the node specific configuration to either a specific classpath per managed server or to system properties set at startup.It turns out that the postfix for ticket ids is managed through a property host.name and that this property can be externalized.The host.name property is used in: /webapps/cas/WEB-INF/spring-configuration/uniqueIdGenerators.xmlIt is set in /webapps/cas/WEB-INF/spring-configuration/propertyFileConfigurer.xmlin a PropertyPlaceholderConfigurer.The documentation for PropertyPlaceholderConfigurer:http://static.springsource.org/spring/docs/2.0.x/api/org/springframework/beans/factory/config/PropertyPlaceholderConfigurer.htmlThis indicates that the properties defined through the PropertyPlaceHolderConfigurer can be externalized.To enable this externalization you would need to change host.properties so it is generic for all the managed servers and thus can be reused for all the managed servers: host.name=${cluster.node.id}Next step is to change the startup scripts for the managed servers and add a system property for -Dcluster.node.id=<something unique and stable>.Viola, the postfix is externalized and the web application can be shared amongst the cluster nodes.

  Read the article

• How to automount NTFS usb sticks on Xubuntu 12.10?

  - by netimen

  I'm running the Xubuntu 12.10 on a Lenovo T520 laptop. If I plug a FAT formatted usb stick, it's mounted automatically, but if I plug in a NTFS formatted one, I have to mount it manually. How to make NTFS usb sticks to mount automatically when plugged? My /etc/fstab in case it helps: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=cd221c3e-44a8-459e-9dfb-04787f1cd0b6 none swap sw

  Read the article

< Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >