Search Results

Search found 15638 results on 626 pages for 'virtual assembly builder'.

Page 587/626 | < Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >

• Diagnose PC Hardware Problems with an Ubuntu Live CD

  - by Trevor Bekolay

  So your PC randomly shuts down or gives you the blue screen of death, but you can’t figure out what’s wrong. The problem could be bad memory or hardware related, and thankfully the Ubuntu Live CD has some tools to help you figure it out. Test your RAM with memtest86+ RAM problems are difficult to diagnose—they can range from annoying program crashes, or crippling reboot loops. Even if you’re not having problems, when you install new RAM it’s a good idea to thoroughly test it. The Ubuntu Live CD includes a tool called Memtest86+ that will do just that—test your computer’s RAM! Unlike many of the Live CD tools that we’ve looked at so far, Memtest86+ has to be run outside of a graphical Ubuntu session. Fortunately, it only takes a few keystrokes. Note: If you used UNetbootin to create an Ubuntu flash drive, then memtest86+ will not be available. We recommend using the Universal USB Installer from Pendrivelinux instead (persistence is possible with Universal USB Installer, but not mandatory). Boot up your computer with a Ubuntu Live CD or USB drive. You will be greeted with this screen: Use the down arrow key to select the Test memory option and hit Enter. Memtest86+ will immediately start testing your RAM. If you suspect that a certain part of memory is the problem, you can select certain portions of memory by pressing “c” and changing that option. You can also select specific tests to run. However, the default settings of Memtest86+ will exhaustively test your memory, so we recommend leaving the settings alone. Memtest86+ will run a variety of tests that can take some time to complete, so start it running before you go to bed to give it adequate time. Test your CPU with cpuburn Random shutdowns – especially when doing computationally intensive tasks – can be a sign of a faulty CPU, power supply, or cooling system. A utility called cpuburn can help you determine if one of these pieces of hardware is the problem. Note: cpuburn is designed to stress test your computer – it will run it fast and cause the CPU to heat up, which may exacerbate small problems that otherwise would be minor. It is a powerful diagnostic tool, but should be used with caution. Boot up your computer with a Ubuntu Live CD or USB drive, and choose to run Ubuntu from the CD or USB drive. When the desktop environment loads up, open the Synaptic Package Manager by clicking on the System menu in the top-left of the screen, then selecting Administration, and then Synaptic Package Manager. Cpuburn is in the universe repository. To enable the universe repository, click on Settings in the menu at the top, and then Repositories. Add a checkmark in the box labeled “Community-maintained Open Source software (universe)”. Click close. In the main Synaptic window, click the Reload button. After the package list has reloaded and the search index has been rebuilt, enter “cpuburn” in the Quick search text box. Click the checkbox in the left column, and select Mark for Installation. Click the Apply button near the top of the window. As cpuburn installs, it will caution you about the possible dangers of its use. Assuming you wish to take the risk (and if your computer is randomly restarting constantly, it’s probably worth it), open a terminal window by clicking on the Applications menu in the top-left of the screen and then selection Applications > Terminal. Cpuburn includes a number of tools to test different types of CPUs. If your CPU is more than six years old, see the full list; for modern AMD CPUs, use the terminal command burnK7 and for modern Intel processors, use the terminal command burnP6 Our processor is an Intel, so we ran burnP6. Once it started up, it immediately pushed the CPU up to 99.7% total usage, according to the Linux utility “top”. If your computer is having a CPU, power supply, or cooling problem, then your computer is likely to shutdown within ten or fifteen minutes. Because of the strain this program puts on your computer, we don’t recommend leaving it running overnight – if there’s a problem, it should crop up relatively quickly. Cpuburn’s tools, including burnP6, have no interface; once they start running, they will start driving your CPU until you stop them. To stop a program like burnP6, press Ctrl+C in the terminal window that is running the program. Conclusion The Ubuntu Live CD provides two great testing tools to diagnose a tricky computer problem, or to stress test a new computer. While they are advanced tools that should be used with caution, they’re extremely useful and easy enough that anyone can use them. Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Persistent Bootable Ubuntu USB Flash DriveAdding extra Repositories on UbuntuHow to Share folders with your Ubuntu Virtual Machine (guest)Building a New Computer – Part 3: Setting it Up TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

  Read the article

• Maintaining shared service in ASP.NET MVC Application

  - by kazimanzurrashid

  Depending on the application sometimes we have to maintain some shared service throughout our application. Let’s say you are developing a multi-blog supported blog engine where both the controller and view must know the currently visiting blog, it’s setting , user information and url generation service. In this post, I will show you how you can handle this kind of case in most convenient way. First, let see the most basic way, we can create our PostController in the following way: public class PostController : Controller { public PostController(dependencies...) { } public ActionResult Index(string blogName, int? page) { BlogInfo blog = blogSerivce.FindByName(blogName); if (blog == null) { return new NotFoundResult(); } IEnumerable<PostInfo> posts = postService.FindPublished(blog.Id, PagingCalculator.StartIndex(page, blog.PostPerPage), blog.PostPerPage); int count = postService.GetPublishedCount(blog.Id); UserInfo user = null; if (HttpContext.User.Identity.IsAuthenticated) { user = userService.FindByName(HttpContext.User.Identity.Name); } return View(new IndexViewModel(urlResolver, user, blog, posts, count, page)); } public ActionResult Archive(string blogName, int? page, ArchiveDate archiveDate) { BlogInfo blog = blogSerivce.FindByName(blogName); if (blog == null) { return new NotFoundResult(); } IEnumerable<PostInfo> posts = postService.FindArchived(blog.Id, archiveDate, PagingCalculator.StartIndex(page, blog.PostPerPage), blog.PostPerPage); int count = postService.GetArchivedCount(blog.Id, archiveDate); UserInfo user = null; if (HttpContext.User.Identity.IsAuthenticated) { user = userService.FindByName(HttpContext.User.Identity.Name); } return View(new ArchiveViewModel(urlResolver, user, blog, posts, count, page, achiveDate)); } public ActionResult Tag(string blogName, string tagSlug, int? page) { BlogInfo blog = blogSerivce.FindByName(blogName); if (blog == null) { return new NotFoundResult(); } TagInfo tag = tagService.FindBySlug(blog.Id, tagSlug); if (tag == null) { return new NotFoundResult(); } IEnumerable<PostInfo> posts = postService.FindPublishedByTag(blog.Id, tag.Id, PagingCalculator.StartIndex(page, blog.PostPerPage), blog.PostPerPage); int count = postService.GetPublishedCountByTag(tag.Id); UserInfo user = null; if (HttpContext.User.Identity.IsAuthenticated) { user = userService.FindByName(HttpContext.User.Identity.Name); } return View(new TagViewModel(urlResolver, user, blog, posts, count, page, tag)); } } As you can see the above code heavily depends upon the current blog and the blog retrieval code is duplicated in all of the action methods, once the blog is retrieved the same blog is passed in the view model. Other than the blog the view also needs the current user and url resolver to render it properly. One way to remove the duplicate blog retrieval code is to create a custom model binder which converts the blog from a blog name and use the blog a parameter in the action methods instead of the string blog name, but it only helps the first half in the above scenario, the action methods still have to pass the blog, user and url resolver etc in the view model. Now lets try to improve the the above code, first lets create a new class which would contain the shared services, lets name it as BlogContext: public class BlogContext { public BlogInfo Blog { get; set; } public UserInfo User { get; set; } public IUrlResolver UrlResolver { get; set; } } Next, we will create an interface, IContextAwareService: public interface IContextAwareService { BlogContext Context { get; set; } } The idea is, whoever needs these shared services needs to implement this interface, in our case both the controller and the view model, now we will create an action filter which will be responsible for populating the context: public class PopulateBlogContextAttribute : FilterAttribute, IActionFilter { private static string blogNameRouteParameter = "blogName"; private readonly IBlogService blogService; private readonly IUserService userService; private readonly BlogContext context; public PopulateBlogContextAttribute(IBlogService blogService, IUserService userService, IUrlResolver urlResolver) { Invariant.IsNotNull(blogService, "blogService"); Invariant.IsNotNull(userService, "userService"); Invariant.IsNotNull(urlResolver, "urlResolver"); this.blogService = blogService; this.userService = userService; context = new BlogContext { UrlResolver = urlResolver }; } public static string BlogNameRouteParameter { [DebuggerStepThrough] get { return blogNameRouteParameter; } [DebuggerStepThrough] set { blogNameRouteParameter = value; } } public void OnActionExecuting(ActionExecutingContext filterContext) { string blogName = (string) filterContext.Controller.ValueProvider.GetValue(BlogNameRouteParameter).ConvertTo(typeof(string), Culture.Current); if (!string.IsNullOrWhiteSpace(blogName)) { context.Blog = blogService.FindByName(blogName); } if (context.Blog == null) { filterContext.Result = new NotFoundResult(); return; } if (filterContext.HttpContext.User.Identity.IsAuthenticated) { context.User = userService.FindByName(filterContext.HttpContext.User.Identity.Name); } IContextAwareService controller = filterContext.Controller as IContextAwareService; if (controller != null) { controller.Context = context; } } public void OnActionExecuted(ActionExecutedContext filterContext) { Invariant.IsNotNull(filterContext, "filterContext"); if ((filterContext.Exception == null) || filterContext.ExceptionHandled) { IContextAwareService model = filterContext.Controller.ViewData.Model as IContextAwareService; if (model != null) { model.Context = context; } } } } As you can see we are populating the context in the OnActionExecuting, which executes just before the controllers action methods executes, so by the time our action methods executes the context is already populated, next we are are assigning the same context in the view model in OnActionExecuted method which executes just after we set the  model and return the view in our action methods. Now, lets change the view models so that it implements this interface: public class IndexViewModel : IContextAwareService { // More Codes } public class ArchiveViewModel : IContextAwareService { // More Codes } public class TagViewModel : IContextAwareService { // More Codes } and the controller: public class PostController : Controller, IContextAwareService { public PostController(dependencies...) { } public BlogContext Context { get; set; } public ActionResult Index(int? page) { IEnumerable<PostInfo> posts = postService.FindPublished(Context.Blog.Id, PagingCalculator.StartIndex(page, Context.Blog.PostPerPage), Context.Blog.PostPerPage); int count = postService.GetPublishedCount(Context.Blog.Id); return View(new IndexViewModel(posts, count, page)); } public ActionResult Archive(int? page, ArchiveDate archiveDate) { IEnumerable<PostInfo> posts = postService.FindArchived(Context.Blog.Id, archiveDate, PagingCalculator.StartIndex(page, Context.Blog.PostPerPage), Context.Blog.PostPerPage); int count = postService.GetArchivedCount(Context.Blog.Id, archiveDate); return View(new ArchiveViewModel(posts, count, page, achiveDate)); } public ActionResult Tag(string blogName, string tagSlug, int? page) { TagInfo tag = tagService.FindBySlug(Context.Blog.Id, tagSlug); if (tag == null) { return new NotFoundResult(); } IEnumerable<PostInfo> posts = postService.FindPublishedByTag(Context.Blog.Id, tag.Id, PagingCalculator.StartIndex(page, Context.Blog.PostPerPage), Context.Blog.PostPerPage); int count = postService.GetPublishedCountByTag(tag.Id); return View(new TagViewModel(posts, count, page, tag)); } } Now, the last thing where we have to glue everything, I will be using the AspNetMvcExtensibility to register the action filter (as there is no better way to inject the dependencies in action filters). public class RegisterFilters : RegisterFiltersBase { private static readonly Type controllerType = typeof(Controller); private static readonly Type contextAwareType = typeof(IContextAwareService); protected override void Register(IFilterRegistry registry) { TypeCatalog controllers = new TypeCatalogBuilder() .Add(GetType().Assembly) .Include(type => controllerType.IsAssignableFrom(type) && contextAwareType.IsAssignableFrom(type)); registry.Register<PopulateBlogContextAttribute>(controllers); } } Thoughts and Comments?

  Read the article

• Solaris 11 Launch Blog Carnival Roundup

  - by constant

  Solaris 11 is here! And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter go to eleven. Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure: Getting Started/Overview A lot of people speculated that the official launch of Solaris 11 would be on 11/11 (whatever way you want to turn it), but it actually happened two days earlier. Larry Wake himself offers 11 Reasons Why Oracle Solaris 11 11/11 Isn't Being Released on 11/11/11. Then, Larry goes on with a summary: Oracle Solaris 11: The First Cloud OS gives you a short and sweet rundown of what the major new features of Solaris 11 are. Jeff Victor has his own list of What's New in Oracle Solaris 11. A popular Solaris 11 meme is to write a blog post about 11 favourite features: Jim Laurent's 11 Reasons to Love Solaris 11, Darren Moffat's 11 Favourite Solaris 11 Features, Mike Gerdt's 11 of My Favourite Things! are just three examples of "11 Favourite Things..." type blog posts, I'm sure many more will follow... More official overview content for Solaris 11 is available from the Oracle Tech Network Solaris 11 Portal. Also, check out Rick Ramsey's blog post Solaris 11 Resources for System Administrators on the OTN Blog and his secret 5 Commands That Make Solaris Administration Easier post from the OTN Garage. (Automatic) Installation and the Image Packaging System (IPS) The brand new Image Packaging System (IPS) and the Automatic Installer (IPS), together with numerous other install/packaging/boot/patching features are among the most significant improvements in Solaris 11. But before installing, you may wonder whether Solaris 11 will support your particular set of hardware devices. Again, the OTN Garage comes to the rescue with Rick Ramsey's post How to Find Out Which Devices Are Supported By Solaris 11. Included is a useful guide to all the first steps to get your Solaris 11 system up and running. Tim Foster had a whole handful of blog posts lined up for the launch, teaching you everything you need to know about IPS but didn't dare to ask: The IPS System Repository, IPS Self-assembly - Part 1: Overlays and Part 2: Multiple Packages Delivering Configuration. Watch out for more IPS posts from Tim! If installing packages or upgrading your system from the net makes you uneasy, then you're not alone: Jim Laurent will tech you how Building a Solaris 11 Repository Without Network Connection will make your life easier. Many of you have already peeked into the future by installing Solaris 11 Express. If you're now wondering whether you can upgrade or whether a fresh install is necessary, then check out Alan Hargreaves's post Upgrading Solaris 11 Express b151a with support to Solaris 11. The trick is in upgrading your pkg(1M) first. Networking One of the first things to do after installing Solaris 11 (or any operating system for that matter), is to set it up for networking. Solaris 11 comes with the brand new "Network Auto-Magic" feature which can figure out everything by itself. For those cases where you want to exercise a little more control, Solaris 11 left a few people scratching their heads. Fortunately, Tschokko wrote up this cool blog post: Solaris 11 manual IPv4 & IPv6 configuration right after the launch ceremony. Thanks, Tschokko! And Milek points out a long awaited networking feature in Solaris 11 called Solaris 11 - hostmodel, which I know for a fact that many customers have looked forward to: How to "bind" a Solaris 11 system to a specific gateway for specific IP address it is using. Steffen Weiberle teaches us how to tune the Solaris 11 networking stack the proper way: ipadm(1M). No more fiddling with ndd(1M)! Check out his tutorial on Solaris 11 Network Tunables. And if you want to get even deeper into the networking stack, there's nothing better than DTrace. Alan Maguire teaches you in: DTracing TCP Congestion Control how to probe deeply into the Solaris 11 TCP/IP stack, the TCP congestion control part in particular. Don't miss his other DTrace and TCP related blog posts! DTrace And there we are: DTrace, the king of all observability tools. Long time DTrace veteran and co-author of The DTrace book*, Brendan Gregg blogged about Solaris 11 DTrace syscall provider changes. BTW, after you install Solaris 11, check out the DTrace toolkit which is installed by default in /usr/dtrace/DTT. It is chock full of handy DTrace scripts, many of which contributed by Brendan himself! Security Another big theme in Solaris 11, and one that is crucial for the success of any operating system in the Cloud is Security. Here are some notable posts in this category: Darren Moffat starts by showing us how to completely get rid of root: Completely Disabling Root Logins on Solaris 11. With no root user, there's one major entry point less to worry about. But that's only the start. In Immutable Zones on Encrypted ZFS, Darren shows us how to double the security of your services: First by locking them into the new Immutable Zones feature, then by encrypting their data using the new ZFS encryption feature. And if you're still missing sudo from your Linux days, Darren again has a solution: Password (PAM) caching for Solaris su - "a la sudo". If you're wondering how much compute power all this encryption will cost you, you're in luck: The Solaris X86 AESNI OpenSSL Engine will make sure you'll use your Intel's embedded crypto support to its fullest. And if you own a brand new SPARC T4 machine you're even luckier: It comes with its own SPARC T4 OpenSSL Engine. Dan Anderson's posts show how there really is now excuse not to encrypt any more... Developers Solaris 11 has a lot to offer to developers as well. Ali Bahrami has a series of blog posts that cover diverse developer topics: elffile: ELF Specific File Identification Utility, Using Stub Objects and The Stub Proto: Not Just For Stub Objects Anymore to name a few. BTW, if you're a developer and want to shape the future of Solaris 11, then Vijay Tatkar has a hint for you: Oracle (Sun Systems Group) is hiring! Desktop and Graphics Yes, Solaris 11 is a 100% server OS, but it can also offer a decent desktop environment, especially if you are a developer. Alan Coopersmith starts by discussing S11 X11: ye olde window system in today's new operating system, then Calum Benson shows us around What's new on the Solaris 11 Desktop. Even accessibility is a first-class citizen in the Solaris 11 user interface. Peter Korn celebrates: Accessible Oracle Solaris 11 - released! Performance Gone are the days of "Slowaris", when Solaris was among the few OSes that "did the right thing" while others cut corners just to win benchmarks. Today, Solaris continues doing the right thing, and it delivers the right performance at the same time. Need proof? Check out Brian's BestPerf blog with continuous updates from the benchmarking lab, including Recent Benchmarks Using Oracle Solaris 11! Send Me More Solaris 11 Launch Articles! These are just a few of the more interesting blog articles that came out around the Solaris 11 launch, I'm sure there are many more! Feel free to post a comment below if you find a particularly interesting blog post that hasn't been listed so far and share your enthusiasm for Solaris 11! *Affiliate link: Buy cool stuff and support this blog at no extra cost. We both win! var flattr_uid = '26528'; var flattr_tle = 'Solaris 11 Launch Blog Carnival Roundup'; var flattr_dsc = '<strong>Solaris 11 is here!</strong>And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter <a href="http://en.wikipedia.org/wiki/Up_to_eleven">go to eleven</a>.Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure:'; var flattr_tag = 'blogging,digest,Oracle,Solaris,solaris,solaris 11'; var flattr_cat = 'text'; var flattr_url = 'http://constantin.glez.de/blog/2011/11/solaris-11-launch-blog-carnival-roundup'; var flattr_lng = 'en_GB'

  Read the article

• SmtpClient and Locked File Attachments

  - by Rick Strahl

  Got a note a couple of days ago from a client using one of my generic routines that wraps SmtpClient. Apparently whenever a file has been attached to a message and emailed with SmtpClient the file remains locked after the message has been sent. Oddly this particular issue hasn’t cropped up before for me although these routines are in use in a number of applications I’ve built. The wrapper I use was built mainly to backfit an old pre-.NET 2.0 email client I built using Sockets to avoid the CDO nightmares of the .NET 1.x mail client. The current class retained the same class interface but now internally uses SmtpClient which holds a flat property interface that makes it less verbose to send off email messages. File attachments in this interface are handled by providing a comma delimited list for files in an Attachments string property which is then collected along with the other flat property settings and eventually passed on to SmtpClient in the form of a MailMessage structure. The jist of the code is something like this: /// <summary> /// Fully self contained mail sending method. Sends an email message by connecting /// and disconnecting from the email server. /// </summary> /// <returns>true or false</returns> public bool SendMail() { if (!this.Connect()) return false; try { // Create and configure the message MailMessage msg = this.GetMessage(); smtp.Send(msg); this.OnSendComplete(this); } catch (Exception ex) { string msg = ex.Message; if (ex.InnerException != null) msg = ex.InnerException.Message; this.SetError(msg); this.OnSendError(this); return false; } finally { // close connection and clear out headers // SmtpClient instance nulled out this.Close(); } return true; } /// <summary> /// Configures the message interface /// </summary> /// <param name="msg"></param> protected virtual MailMessage GetMessage() { MailMessage msg = new MailMessage(); msg.Body = this.Message; msg.Subject = this.Subject; msg.From = new MailAddress(this.SenderEmail, this.SenderName); if (!string.IsNullOrEmpty(this.ReplyTo)) msg.ReplyTo = new MailAddress(this.ReplyTo); // Send all the different recipients this.AssignMailAddresses(msg.To, this.Recipient); this.AssignMailAddresses(msg.CC, this.CC); this.AssignMailAddresses(msg.Bcc, this.BCC); if (!string.IsNullOrEmpty(this.Attachments)) { string[] files = this.Attachments.Split(new char[2] { ',', ';' }, StringSplitOptions.RemoveEmptyEntries); foreach (string file in files) { msg.Attachments.Add(new Attachment(file)); } } if (this.ContentType.StartsWith("text/html")) msg.IsBodyHtml = true; else msg.IsBodyHtml = false; msg.BodyEncoding = this.Encoding; … additional code omitted return msg; } Basically this code collects all the property settings of the wrapper object and applies them to the SmtpClient and in GetMessage() to an individual MailMessage properties. Specifically notice that attachment filenames are converted from a comma-delimited string to filenames from which new attachments are created. The code as it’s written however, will cause the problem with file attachments not being released properly. Internally .NET opens up stream handles and reads the files from disk to dump them into the email send stream. The attachments are always sent correctly but the local files are not immediately closed. As you probably guessed the issue is simply that some resources are not automatcially disposed when sending is complete and sure enough the following code change fixes the problem: // Create and configure the message using (MailMessage msg = this.GetMessage()) { smtp.Send(msg); if (this.SendComplete != null) this.OnSendComplete(this); // or use an explicit msg.Dispose() here } The Message object requires an explicit call to Dispose() (or a using() block as I have here) to force the attachment files to get closed. I think this is rather odd behavior for this scenario however. The code I use passes in filenames and my expectation of an API that accepts file names is that it uses the files by opening and streaming them and then closing them when done. Why keep the streams open and require an explicit .Dispose() by the calling code which is bound to lead to unexpected behavior just as my customer ran into? Any API level code should clean up as much as possible and this is clearly not happening here resulting in unexpected behavior. Apparently lots of other folks have run into this before as I found based on a few Twitter comments on this topic. Odd to me too is that SmtpClient() doesn’t implement IDisposable – it’s only the MailMessage (and Attachments) that implement it and require it to clean up for left over resources like open file handles. This means that you couldn’t even use a using() statement around the SmtpClient code to resolve this – instead you’d have to wrap it around the message object which again is rather unexpected. Well, chalk that one up to another small unexpected behavior that wasted a half an hour of my time – hopefully this post will help someone avoid this same half an hour of hunting and searching. Resources: Full code to SmptClientNative (West Wind Web Toolkit Repository) SmtpClient Documentation MSDN © Rick Strahl, West Wind Technologies, 2005-2010Posted in .NET  

  Read the article

• WebLogic Server Performance and Tuning: Part I - Tuning JVM

  - by Gokhan Gungor

  Each WebLogic Server instance runs in its own dedicated Java Virtual Machine (JVM) which is their runtime environment. Every Admin Server in any domain executes within a JVM. The same also applies for Managed Servers. WebLogic Server can be used for a wide variety of applications and services which uses the same runtime environment and resources. Oracle WebLogic ships with 2 different JVM, HotSpot and JRocket but you can choose which JVM you want to use. JVM is designed to optimize itself however it also provides some startup options to make small changes. There are default values for its memory and garbage collection. In real world, you will not want to stick with the default values provided by the JVM rather want to customize these values based on your applications which can produce large gains in performance by making small changes with the JVM parameters. We can tell the garbage collector how to delete garbage and we can also tell JVM how much space to allocate for each generation (of java Objects) or for heap. Remember during the garbage collection no other process is executed within the JVM or runtime, which is called STOP THE WORLD which can affect the overall throughput. Each JVM has its own memory segment called Heap Memory which is the storage for java Objects. These objects can be grouped based on their age like young generation (recently created objects) or old generation (surviving objects that have lived to some extent), etc. A java object is considered garbage when it can no longer be reached from anywhere in the running program. Each generation has its own memory segment within the heap. When this segment gets full, garbage collector deletes all the objects that are marked as garbage to create space. When the old generation space gets full, the JVM performs a major collection to remove the unused objects and reclaim their space. A major garbage collect takes a significant amount of time and can affect system performance. When we create a managed server either on the same machine or on remote machine it gets its initial startup parameters from $DOMAIN_HOME/bin/setDomainEnv.sh/cmd file. By default two parameters are set:     Xms: The initial heapsize     Xmx: The max heapsize Try to set equal initial and max heapsize. The startup time can be a little longer but for long running applications it will provide a better performance. When we set -Xms512m -Xmx1024m, the physical heap size will be 512m. This means that there are pages of memory (in the state of the 512m) that the JVM does not explicitly control. It will be controlled by OS which could be reserve for the other tasks. In this case, it is an advantage if the JVM claims the entire memory at once and try not to spend time to extend when more memory is needed. Also you can use -XX:MaxPermSize (Maximum size of the permanent generation) option for Sun JVM. You should adjust the size accordingly if your application dynamically load and unload a lot of classes in order to optimize the performance. You can set the JVM options/heap size from the following places:     Through the Admin console, in the Server start tab     In the startManagedWeblogic script for the managed servers     $DOMAIN_HOME/bin/startManagedWebLogic.sh/cmd     JAVA_OPTIONS="-Xms1024m -Xmx1024m" ${JAVA_OPTIONS}     In the setDomainEnv script for the managed servers and admin server (domain wide)     USER_MEM_ARGS="-Xms1024m -Xmx1024m" When there is free memory available in the heap but it is too fragmented and not contiguously located to store the object or when there is actually insufficient memory we can get java.lang.OutOfMemoryError. We should create Thread Dump and analyze if that is possible in case of such error. The second option we can use to produce higher throughput is to garbage collection. We can roughly divide GC algorithms into 2 categories: parallel and concurrent. Parallel GC stops the execution of all the application and performs the full GC, this generally provides better throughput but also high latency using all the CPU resources during GC. Concurrent GC on the other hand, produces low latency but also low throughput since it performs GC while application executes. The JRockit JVM provides some useful command-line parameters that to control of its GC scheme like -XgcPrio command-line parameter which takes the following options; XgcPrio:pausetime (To minimize latency, parallel GC) XgcPrio:throughput (To minimize throughput, concurrent GC ) XgcPrio:deterministic (To guarantee maximum pause time, for real time systems) Sun JVM has similar parameters (like  -XX:UseParallelGC or -XX:+UseConcMarkSweepGC) to control its GC scheme. We can add -verbosegc -XX:+PrintGCDetails to monitor indications of a problem with garbage collection. Try configuring JVM’s of all managed servers to execute in -server mode to ensure that it is optimized for a server-side production environment.

  Read the article

• CodePlex Daily Summary for Wednesday, April 14, 2010

  CodePlex Daily Summary for Wednesday, April 14, 2010New Projectsbitly.net: A bitly (useing Version 3 of their API's) client for .NET (Version 3.5)Chord Sheet Editor Add-In for Word: Transpose music chord sheets (guitar chord sheets, etc.) in Microsoft Word using this VSTO Add-In.CloudSponge.Net: Simple .Net wrapper for www.cloudsponge.com's REST API.Database Searcher: This is a small tool for searching a typed value inside all type matching columns and rows of a database. For connecting the database a .NET data p...Edu Math: PL: Program Edu Math, ma na celu ułatwienie wykonywania skomplikowanych obliczeń oraz analiz matematycznych. EN: Program Edu Math, aims to facilita...fluent AOP: This project is not yet publishedFNA Fractal Numerical Algorithm for a new encryption technology: FNA Fractal Numerical Algorithm for a new encryption technology is a symmetrical encryption method based on two algorithms that I developed for: 1....Image viewer cum editor: This is a project on image viewing and editing. The project have following features VIEWER: Album Password security for albums Inbuilt Browser...JEngine - Tile Map Editor v1: JEngine - Tile Map Editor v1Jeremy Knight: Code samples, snippets, etc from my personal blog.lcskey: lcs test codemoldme: testesds ssdfsdfsNanoPrompt: NanoPrompt makes it more pleasant to work on a command-line. Features: - syntax-highlighting - graphical output possible - up to 12 "displays" (cha...nirvana: for testOffInvoice Add-in for MS Office 2010: Project Description: The project it's based in the ability to extend funtionality in the Microsoft Office 2010 suite.PowerSlim - Acceptance Testing for Enterprise Applications: PowerSlim makes it possible to use PowerShell in the acceptance testing. It is a small but powerful plugin for the Fitnesse acceptance testing fram...Proxi [Proxy Interface]: Proxi is a light-weight library that allows to generate dynamic proxies using different providers. By utilizing Proxi frameworks and libraries can ...Reality show about ASP.NET development: This application is created with using ASP.NET and Microsoft SQL Server for the demo purposes with the following target goals: example of usage fo...RecordLogon.vbs login script: RecordLogon.vbs is a script applied at logon via Group or Local policy. It records specific user and computer information and writes the data to a ...SpaceGameApplet: A java game ;)SpaceShipsGame: A game with space ships ";..;"SysHard: Info for Linux system.System Etheral™ - Developer: SE Dev (System Etheral™ - Developer) is an OS (Operating System) that is a bit like UNIX but it is for you to edit! We have not gave you much but w...TimeSheet Reporting Silverlight: TimeSheet Reporting application in Silver light. Contains a data grid containing combo boxes bound to different data sources like Members and Proje...TrayBird: A minimalistic twitter client for windows.Twitter4You: This appliction for windows is a communication for twitter!WCF RIA Services (+ PRISM + MVVM) LoB Application: WCF RIA Services sample LoB application (case study) built on PRISM with Entity Framework Model. It's a simple application for a fictive company Te...New ReleasesBluetooth Radar: Version 1.9: Change Search and Close Icons Add Device Detail ViewCloudSponge.Net: Alpha: Initial alpha release very limited tested includes *CloudSponge.dll *Sponge.exe (simple cmd line utility to import contacts, and test API)Global Assembly Cache comparison tool: GAC Compare version 3.1: Version 3.1Added export assemblies to directory functionalityHTML Ruby: 6.21.2: Some style adjustments Ruby text spacing is spaced out to keep Firefox responsive Status bar is backJEngine - Tile Map Editor v1: JEngine - Tile Map Editor V1: JEngine - Tile Map Editor V1 Discription SoonJeremy Knight: SQL Padding Functions v1.0: The entire scripts, including if exists logic, for SQL Padding Functions are included in this download.jqGrid ASP.Net MVC Control: Version 1.1.0.0: UPDATE 14-04 Fixed a small problem with the custom column renderers controller, And added a new example for a cascading-dropdownlist grid column A...JulMar MVVM Helpers + Behaviors: Version 1.06: This version is an update to MVVM Helpers that is built on Visual Studio 2010 RTM. It includes some minor updates to classes and a few new convert...lcskey: v 1.0: v1.0 基本能跑，未详细测试LINQ To Blippr: LINQ to Blippr: Download to test out and play around LINQ to Blippr based from blog posts: http://consultingblogs.emc.com/jonsharrattLINQ to XSD: 1.1.0: The LINQ to XSD technology provides .NET developers with support for typed XML programming. LINQ to XSD contributes to the LINQ project (.NET Langu...LINQ to XSD: 2.0.0: It is the same code as version 1.1 but compiled for .NET framework 4.0. Requirements: .NET Framework 4.0.LocoSync: LocoSync v0.1r2010.04.12: Second Alpha version of LocoSync. Download unzip and run setup. It will download the .NET framework if needed. It will create an icon in the start ...mojoPortal: 2.3.4.2: see release note on mojoportal.com http://www.mojoportal.com/mojoportal-2342-released.aspxNanoPrompt: Setup (.NET 4.0) - 20100414-A Nightly: The setup for NanoPrompt 0.Xa for Intel-80386- (32 or 64 bits) or Intel-Itanium-compatible targets with installed .NET-Framework 4.0 Client Profile...Neural Cryptography in F#: Neural Cryptography 0.0.5: This release provides the basic functionality that this project was supposed to have from the very beginning: it can hash strings using neural netw...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Class Libraries, version 1.0.1.121: The NodeXL class libraries can be used to display network graphs in .NET applications. To include a NodeXL network graph in a WPF desktop or Windo...nRoute Framework: nRoute.Toolkit Release Version 0.4: Note, both "nRoute.Framework (x3)" and "nRoute.Toolkit (x3)" zip files contains binaries for Web, Desktop and Mobile targets. Also this release wa...Numina Application/Security Framework: Numina.Framework Core 50381: Rebuilt using .NET 4 RTM One minor change made to the web.config file - added System.Data.Linq to the assemblies list.PokeIn Comet Ajax Library: PokeIn Lib and Sample: Great sample with usefull comet ajax library! .Net 2.0 Note : It was very easy to build this project with Visual Studio 10 ;)Powershell Zip File Export/Import Cmdlet Module: PowershellZip 0.1.0.3: Powershell-Zip 0.1.0.3 contains the cmdlets Export-Zip and Import-ZipPowerSlim - Acceptance Testing for Enterprise Applications: PowerSlim 0.1: Just PowerSlim. http://vlasenko.org/2010/04/09/howto-setup-powerslim-step-by-step/RDA Collaboration Team Projects: SharePoint BPOS Logging Framework: RDA's SharePoint BPOS logging framework is a very lightweight WSP Builder project that provides the following items: A Site feature that creates a...RecordLogon.vbs login script: LogonSearchGadget: This is the Windows Gadget companion for RecordLogon.RecordLogon.vbs login script: LogonSearchTool.hta: This is the HTA standalone script that runs inside of an IE window. The HTA is what presents the data the recordlogon.vbs creates. Please remember...RecordLogon.vbs login script: recordlogon.vbs: This is the main script that grabs the logon and computer information and dumps the info as text files to a defined folder share. Make sure to chec...Rensea Image Viewer: RIV 0.4.3: New Release of RIV. Added many many features! You would love it. You would need .NET Framework 4.0 to make it run With separated RIV up-loader, to...SharePoint Site Configurator Feature: SharePoint Site Configurator V2.0: Updated for SharePoint 2010 and added quite a lot of new functions. Compatible with SP2010, MOSS and WSS 3.0Sharp Tests Ex: Sharp Tests Ex 1.0.0RC2: Project Description #TestsEx (Sharp Tests Extensions) is a set of extensible extensions. The main target is write short assertions where the Visual...SQL Server Extended Properties Quick Editor: Release 1.6.2: Whats new in 1.6.2: Fixed several errors in LinqToSQL generated classes, solved generation EntitySet members. Its highly recomended to download and...SSRS SDK for PHP: SugarCRM Sample for SSRSReport: The zip file contains a sample SugarCRM module that shows how the SSRS SDK for PHP can be used to add simple reporting capabilities to the SugarCRM...System Etheral™ - Developer: System Etheral Dev v1.00: Comes with a VERY basic text editor and the ability to shutdown. Hopefully we will have a lot more stuff in version 1.01! But this is fine for now....Text to HTML: 0.4.2.0: ¡Gracias a Martin Lemburg por avisar de los errores y por sus sugerencias! Cambios de la versiónSustitución de los caracteres especiales alemanes:...TimeSheet Reporting Silverlight: v1.0 Source Code: Source CodeTwitter4You: Twitter 4 You - Version 1.0 (TESTER): Serialcode: http://joeynl.blogspot.com/2010/04/test-version-of-t4yv1.html Thanks JoeyNLVCC: Latest build, v2.1.30413.0: Automatic drop of latest buildVisioAutomation: VisioAutomation 2.5.1: VisioAutomation 2.5.1- Moved to Visual Studio 2010 (Still using .NET Framework 3.5) Changes Since 2.5.0- Solution and Projects are all based on Vi...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesPHPExcelFacebook Developer ToolkitMost Active ProjectsRawrAutoPocopatterns & practices – Enterprise LibraryGMap.NET - Great Maps for Windows Forms & PresentationFarseer Physics EngineNB_Store - Free DotNetNuke Ecommerce Catalog ModuleBeanProxyjQuery Library for SharePoint Web ServicesBlogEngine.NETFacebook Developer Toolkit

  Read the article

• Three Steps to Becoming an Expert Oracle Linux System Administrator

  - by Antoinette O'Sullivan

  Oracle provides a complete system administration curriculum to take you from your initial experience of Unix to being an expert Oracle Linux system administrator. You can take these live instructor-led courses from your own desk through live-virtual events or by traveling to an education center through in-class events. Step 1: Unix and Linux Essentials This 3-day course is designed for users and administrators who are new to Oracle Linux. It will help you develop the basic UNIX skills needed to interact comfortably and confidently with the operating system. Below is a sample of the in-class events already on the schedule.  Location  Date  Delivery Language  Vivoorde, Belgium  28 October 2013  English  Berlin, Germany  15 July 2013  German  Utrecht, Netherlands  19 August 2013  Dutch  Bucarest, Romania  12 August 2013  Romanian  Ankara, Turkey  6 January 2013  Turkish  Nairobi, Kenya  5 August 2013  English  Kaduna, Nigeria  15 July 2013  English   Woodmead, South Africa  15 July 2013  English   Jakarta, Indonesia  23 September 2013  English  Petaling Jaya, Malaysia  22 July 2013  English  Makati City, Philippines  3 July 2013  English  Bangkok, Thailand  20 November 2013  English  Auckland, New Zealand  5 August 2013  English  Melbourne, Australia  12 August 2013  English  Ottawa, Montreal, Toronto, Canada  3 September 2013  English  San Francisco and San Jose, CA, United States  15 July 2013  English  Reston, VA, United States  7 August 2013  English  Edison, NJ, and King of Prussia, PA, United States  3 September 2013  English  Denver, CO, United States  25 September 2013  English  Cambridge, MA, and Roseville MN, United States  6 November 2013  English  Phoenix, AZ, and Sacramento, CA, United States  25 November 2013  English Step 2: Oracle Linux System Administration Through this 5-day course, become a knowledgeable Oracle Linux system administrator, learning how to install Oracle Linux and the benefits of Oracle's Unbreakable Enterprise Kernel and Ksplice. Below is a sample of in-class events already on the schedule.  Location  Date  Delivery Language  Vienna, Austria  1 July 2013  German  Vivoorde, Belgium  18 November 2013  English  Zagreb, Croatia  16 September 2013  Croatian  London, England  3 September 2013  English  Manchester, England  9 September 2013  English  Paris, France  29 July 2013  French  Budapest, Hungary  8 July 2013  Hungarian  Utrecht, Netherland  2 September 2013  Dutch  Warsaw, Poland  15 July 2013  Polish  Bucharest, Romania  2 December 2013  Romanian  Ankara, Turkey  7 October 2013  Turkish  Istanbul, Turkey  9 September 2013  Turkish  Nairobi, Kenya  12 August 2013  English  Petaling Jaya, Malaysia  29 July 2013  English  Kuala Lumpur, Malaysia  21 October 2013  English  Makati City, Philippines  8 July 2013  English  Singapore  24 July 2013  English  Bangkok, Thailand  26 July 2013  English  Canberra, Australia  19 August 2013  English  Melbourne, Australia  16 September 2013  English   Sydney, Australia 19 August 2013   English   Mississauga, Canada  26 August 2013  English  Ottawa, Canada  4 November 2013  English  Phoenix, AZ, United States  7 October 2013  English  Belmont, CA, United States  23 September 2013  English  Irvine, CA, United States  18 November 2013  English  Sacramento, CA, United States  19 August 2013  English  San Francisco, CA, United States  15 July 2013  English  Denver, CO, United States  19 August 2013  English  Schaumburg, IL, United States  26 August 2013  English  Indianapolis, IN, United States  14 October 2013  English  Columbia, MD, United States  30 September 2013  English  Roseville, MN, United States  19 August 2013  English  St Louis, MO, United States  7 October 2013  English  Edison, NJ, United States  28 October 2013  English  Beaverton, OR, United States  12 August 2013  English  Pittsburg, PA, United States 9 December 2013   English  Reston, VA, United States 12 August 2013   English  Brookfield, WI, United States 30 September 2013   English  Sao Paolo, Brazil 15 July 2013   Brazilian Portugese Step 3: Oracle Linux Advanced System Administration This new 3-day course is ideal for administrators who want to learn about managing resources and file systems while developing troubleshooting and advanced storage administration skills. You will learn about Linux Containers, Cgroups, btrfs, DTrace and more. Below is a sample of in-class events already on the schedule.  Location  Date  Delivery Language  Melbourne, Australia  9 October 2013  English  Roseville, MN, United States  3 September 2013  English To register for or learn more about these courses, go to http://oracle.com/education/linux. Watch this video to learn more about Oracle's operating system training.

  Read the article

• Multitask Like a Pro with AquaSnap

  - by Matthew Guay

  Are you tired of shuffling back and forth between windows?  Here’s a handy app that can help you keep all of your windows organized and accessible. AquaSnap is a great free utility that helps you use multiple windows at the same time easily and efficiently.  One of Windows 7’s greatest new features is Aero Snap, which lets you easily view windows side by side by simply dragging windows to side of your screen.  After using Windows 7 for the past year, Aero Snap is one of the features we really miss when using older versions of Windows. With AquaSnap, you now have all of the features of Aero Snap and more in Windows 2000, XP, Vista, and of course Windows 7.  Not only does it give you Aero Snap features, but AquaSnap also gives you more control over your windows to make you more productive. Getting Started AquaSnap is a a free download for Windows 2000, XP, Vista, and 7.  Download the small installer (link below) and install it with the default settings. AquaSnap automatically runs as soon as it is installed, and you will notice a new icon in your system tray. Now you can go ahead and put it to use.  Drag a window to any edge or corner of your desktop, and you will see an icon showing what part of the screen the window will cover. Dragging it to the side of the screen expanded the window to fill the right half of the screen, just like the default Aero Snap in Windows 7.  You can drag the window away to restore it to its former size. AquaSnap works on any corner of the screen too, so you can have 4 windows side-by-side.  We already have 3 windows snapped to the corners, and notice that we’re dragging a fourth window to the bottom right corner. You can also snap windows to the bottom and top of the screen.  Here we have Word snapped to the bottom half of the screen, and we’re dragging Chrome to the top. You can even snap internal windows in Multiple Document Interface (MDI) programs such as Excel.  Here we are snapping a workbook in Excel to the left to view 2 workbooks side-by-side.   Additionally, AquaSnap lets you keep any window always on top.  Simply shake any window, and it will turn semi-transparent and stay on top of all other windows.  Notice the transparent calculator here on top of Excel. All of AquaSnap’s features work great in Windows 2000, XP, and Vista too.  Here we are snapping IE6 to the left of the screen in XP. Here are 3 windows snapped to the sides in XP.  You can mix the snap modes, and have, for instance, two windows on the right side and one window on the left.  This is a great way to maximize productivity if you need more space in one of the windows. Even AquaShake works to keep a window transparent and on top in XP. Settings AquaSnap has a detailed settings dialog where you can tweak it to work exactly like you want.  Simply right-click on its icon in the taskbar, and select Settings. From the first screen, you can choose if you want AquaSnap to start with Windows, and if you want it to show an icon in the system tray.  If you turn off the system tray icon, you can access the AquaSnap settings from Start > All Programs > AquaSnap > Configuration (or simply search for Configuration in Vista or Windows 7). The second tab in settings lets you choose what you want each snapping region to do.  You can also choose two other presets, including AeroSnap (which works just like the default Aero Snap in Windows 7) and AquaSnap simple (which only snaps at the edges of the screen, not the corners). The third tab lets you increase or decrease the opacity of pinned windows when using AquaShake, and also lets you increase or decrease the shaking sensitivity.  Additionally, if you prefer the standard AeroShake functionality, which minimizes all other open windows when you shake a window, you can choose that too. The fourth tab lets you activate an optional feature, AquaGlass.  If you activate this, it will make windows turn transparent when you drag them across the screen.   Finally, the last tab lets you change the color and opacity of the preview rectangle, or simply turn it off. Or, if you want to temporarily turn AquaSnap off, simply right-click on its icon and select Off.  In Windows 7, turning off AquaSnap will restore your standard Windows Aero Snap functionality, and in other version of Windows it will stop letting you snap windows at all.  You can then repeat the steps and select On when you want to use AquaSnap again. Conclusion AquaSnap is a handy tool to make you more productive at your computer.  With a wide variety of useful features, there’s something here for everyone.  Download AquaSnap Similar Articles Productive Geek Tips How to Get Virtual Desktops on Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) If it were only this easy Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook

  Read the article

• ASP.NET Web Forms Extensibility: Providers

  - by Ricardo Peres

  Introduction This will be the first of a number of posts on ASP.NET extensibility. At this moment I don’t know exactly how many will be and I only know a couple of subjects that I want to talk about, so more will come in the next days. I have the sensation that the providers offered by ASP.NET are not widely know, although everyone uses, for example, sessions, they may not be aware of the extensibility points that Microsoft included. This post won’t go into details of how to configure and extend each of the providers, but will hopefully give some pointers on that direction. Canonical These are the most widely known and used providers, coming from ASP.NET 1, chances are, you have used them already. Good support for invoking client side, either from a .NET application or from JavaScript. Lots of server-side controls use them, such as the Login control for example. Membership The Membership provider is responsible for managing registered users, including creating new ones, authenticating them, changing passwords, etc. ASP.NET comes with two implementations, one that uses a SQL Server database and another that uses the Active Directory. The base class is Membership and new providers are registered on the membership section on the Web.config file, as well as parameters for specifying minimum password lengths, complexities, maximum age, etc. One reason for creating a custom provider would be, for example, storing membership information in a different database engine. 1: <membership defaultProvider="MyProvider"> 2: <providers> 3: <add name="MyProvider" type="MyClass, MyAssembly"/> 4: </providers> 5: </membership> Role The Role provider assigns roles to authenticated users. The base class is Role and there are three out of the box implementations: XML-based, SQL Server and Windows-based. Also registered on Web.config through the roleManager section, where you can also say if your roles should be cached on a cookie. If you want your roles to come from a different place, implement a custom provider. 1: <roleManager defaultProvider="MyProvider"> 2: <providers> 3: <add name="MyProvider" type="MyClass, MyAssembly" /> 4: </providers> 5: </roleManager> Profile The Profile provider allows defining a set of properties that will be tied and made available to authenticated or even anonymous ones, which must be tracked by using anonymous authentication. The base class is Profile and the only included implementation stores these settings in a SQL Server database. Configured through profile section, where you also specify the properties to make available, a custom provider would allow storing these properties in different locations. 1: <profile defaultProvider="MyProvider"> 2: <providers> 3: <add name="MyProvider" type="MyClass, MyAssembly"/> 4: </providers> 5: </profile> Basic OK, I didn’t know what to call these, so Basic is probably as good as a name as anything else. Not supported client-side (doesn’t even make sense). Session The Session provider allows storing data tied to the current “session”, which is normally created when a user first accesses the site, even when it is not yet authenticated, and remains all the way. The base class and only included implementation is SessionStateStoreProviderBase and it is capable of storing data in one of three locations: In the process memory (default, not suitable for web farms or increased reliability); A SQL Server database (best for reliability and clustering); The ASP.NET State Service, which is a Windows Service that is installed with the .NET Framework (ok for clustering). The configuration is made through the sessionState section. By adding a custom Session provider, you can store the data in different locations – think for example of a distributed cache. 1: <sessionState customProvider=”MyProvider”> 2: <providers> 3: <add name=”MyProvider” type=”MyClass, MyAssembly” /> 4: </providers> 5: </sessionState> Resource A not so known provider, allows you to change the origin of localized resource elements. By default, these come from RESX files and are used whenever you use the Resources expression builder or the GetGlobalResourceObject and GetLocalResourceObject methods, but if you implement a custom provider, you can have these elements come from some place else, such as a database. The base class is ResourceProviderFactory and there’s only one internal implementation which uses these RESX files. Configuration is through the globalization section. 1: <globalization resourceProviderFactoryType="MyClass, MyAssembly" /> Health Monitoring Health Monitoring is also probably not so well known, and actually not a good name for it. First, in order to understand what it does, you have to know that ASP.NET fires “events” at specific times and when specific things happen, such as when logging in, an exception is raised. These are not user interface events and you can create your own and fire them, nothing will happen, but the Health Monitoring provider will detect it. You can configure it to do things when certain conditions are met, such as a number of events being fired in a certain amount of time. You define these rules and route them to a specific provider, which must inherit from WebEventProvider. Out of the box implementations include sending mails, logging to a SQL Server database, writing to the Windows Event Log, Windows Management Instrumentation, the IIS 7 Trace infrastructure or the debugger Trace. Its configuration is achieved by the healthMonitoring section and a reason for implementing a custom provider would be, for example, locking down a web application in the event of a significant number of failed login attempts occurring in a small period of time. 1: <healthMonitoring> 2: <providers> 3: <add name="MyProvider" type="MyClass, MyAssembly"/> 4: </providers> 5: </healthMonitoring> Sitemap The Sitemap provider allows defining the site’s navigation structure and associated required permissions for each node, in a tree-like fashion. Usually this is statically defined, and the included provider allows it, by supplying this structure in a Web.sitemap XML file. The base class is SiteMapProvider and you can extend it in order to supply you own source for the site’s structure, which may even be dynamic. Its configuration must be done through the siteMap section. 1: <siteMap defaultProvider="MyProvider"> 2: <providers><add name="MyProvider" type="MyClass, MyAssembly" /> 3: </providers> 4: </siteMap> Web Part Personalization Web Parts are better known by SharePoint users, but since ASP.NET 2.0 they are included in the core Framework. Web Parts are server-side controls that offer certain possibilities of configuration by clients visiting the page where they are located. The infrastructure handles this configuration per user or globally for all users and this provider is responsible for just that. The base class is PersonalizationProvider and the only included implementation stores settings on SQL Server. Add new providers through the personalization section. 1: <webParts> 2: <personalization defaultProvider="MyProvider"> 3: <providers> 4: <add name="MyProvider" type="MyClass, MyAssembly"/> 5: </providers> 6: </personalization> 7: </webParts> Build The Build provider is responsible for compiling whatever files are present on your web folder. There’s a base class, BuildProvider, and, as can be expected, internal implementations for building pages (ASPX), master pages (Master), user web controls (ASCX), handlers (ASHX), themes (Skin), XML Schemas (XSD), web services (ASMX, SVC), resources (RESX), browser capabilities files (Browser) and so on. You would write a build provider if you wanted to generate code from any kind of non-code file so that you have strong typing at development time. Configuration goes on the buildProviders section and it is per extension. 1: <buildProviders> 2: <add extension=".ext" type="MyClass, MyAssembly” /> 3: </buildProviders> New in ASP.NET 4 Not exactly new since they exist since 2010, but in ASP.NET terms, still new. Output Cache The Output Cache for ASPX pages and ASCX user controls is now extensible, through the Output Cache provider, which means you can implement a custom mechanism for storing and retrieving cached data, for example, in a distributed fashion. The base class is OutputCacheProvider and the only implementation is private. Configuration goes on the outputCache section and on each page and web user control you can choose the provider you want to use. 1: <caching> 2: <outputCache defaultProvider="MyProvider"> 3: <providers> 4: <add name="MyProvider" type="MyClass, MyAssembly"/> 5: </providers> 6: </outputCache> 7: </caching> Request Validation A big change introduced in ASP.NET 4 (and refined in 4.5, by the way) is the introduction of extensible request validation, by means of a Request Validation provider. This means we are not limited to either enabling or disabling event validation for all pages or for a specific page, but we now have fine control over each of the elements of the request, including cookies, headers, query string and form values. The base provider class is RequestValidator and the configuration goes on the httpRuntime section. 1: <httpRuntime requestValidationType="MyClass, MyAssembly" /> Browser Capabilities The Browser Capabilities provider is new in ASP.NET 4, although the concept exists from ASP.NET 2. The idea is to map a browser brand and version to its supported capabilities, such as JavaScript version, Flash support, ActiveX support, and so on. Previously, this was all hardcoded in .Browser files located in %WINDIR%\Microsoft.NET\Framework(64)\vXXXXX\Config\Browsers, but now you can have a class inherit from HttpCapabilitiesProvider and implement your own mechanism. Register in on the browserCaps section. 1: <browserCaps provider="MyClass, MyAssembly" /> Encoder The Encoder provider is responsible for encoding every string that is sent to the browser on a page or header. This includes for example converting special characters for their standard codes and is implemented by the base class HttpEncoder. Another implementation takes care of Anti Cross Site Scripting (XSS) attacks. Build your own by inheriting from one of these classes if you want to add some additional processing to these strings. The configuration will go on the httpRuntime section. 1: <httpRuntime encoderType="MyClass, MyAssembly" /> Conclusion That’s about it for ASP.NET providers. It was by no means a thorough description, but I hope I managed to raise your interest on this subject. There are lots of pointers on the Internet, so I only included direct references to the Framework classes and configuration sections. Stay tuned for more extensibility!

  Read the article

• Interface contracts – forcing code contracts through interfaces

  - by DigiMortal

  Sometimes we need a way to make different implementations of same interface follow same rules. One option is to duplicate contracts to all implementation but this is not good option because we have duplicated code then. The other option is to force contracts to all implementations at interface level. In this posting I will show you how to do it using interface contracts and contracts class. Using code from previous example about unit testing code with code contracts I will go further and force contracts at interface level. Here is the code from previous example. Take a careful look at it because I will talk about some modifications to this code soon. public interface IRandomGenerator {     int Next(int min, int max); }   public class RandomGenerator : IRandomGenerator {     private Random _random = new Random();       public int Next(int min, int max)     {         return _random.Next(min, max);     } }    public class Randomizer {     private IRandomGenerator _generator;       private Randomizer()     {         _generator = new RandomGenerator();     }       public Randomizer(IRandomGenerator generator)     {         _generator = generator;     }       public int GetRandomFromRangeContracted(int min, int max)     {         Contract.Requires<ArgumentOutOfRangeException>(             min < max,             "Min must be less than max"         );           Contract.Ensures(             Contract.Result<int>() >= min &&             Contract.Result<int>() <= max,             "Return value is out of range"         );           return _generator.Next(min, max);     } } If we look at the GetRandomFromRangeContracted() method we can see that contracts set in this method are applicable to all implementations of IRandomGenerator interface. Although we can write new implementations as we want these implementations need exactly the same contracts. If we are using generators somewhere else then code contracts are not with them anymore. To solve the problem we will force code contracts at interface level. NB! To make the following code work you must enable Contract Reference Assembly building from project settings. Interface contracts and contracts class Interface contains no code – only definitions of members that implementing type must have. But code contracts must be defined in body of member they are part of. To get over this limitation, code contracts are defined in separate contracts class. Interface is bound to this class by special attribute and contracts class refers to interface through special attribute. Here is the IRandomGenerator with contracts and contracts class. Also I write simple fake so we can test contracts easily based only on interface mock. [ContractClass(typeof(RandomGeneratorContracts))] public interface IRandomGenerator {     int Next(int min, int max); }   [ContractClassFor(typeof(IRandomGenerator))] internal sealed class RandomGeneratorContracts : IRandomGenerator {     int IRandomGenerator.Next(int min, int max)     {         Contract.Requires<ArgumentOutOfRangeException>(                 min < max,                 "Min must be less than max"             );           Contract.Ensures(             Contract.Result<int>() >= min &&             Contract.Result<int>() <= max,             "Return value is out of range"         );           return default(int);     } }   public class RandomFake : IRandomGenerator {     private int _testValue;       public RandomGen(int testValue)     {         _testValue = testValue;     }       public int Next(int min, int max)     {         return _testValue;     } } To try out these changes use the following code. var gen = new RandomFake(3);   try {     gen.Next(10, 1); } catch(Exception ex) {     Debug.WriteLine(ex.Message); }   try {     gen.Next(5, 10); } catch(Exception ex) {     Debug.WriteLine(ex.Message); } Now we can force code contracts to all types that implement our IRandomGenerator interface and we must test only the interface to make sure that contracts are defined correctly.

  Read the article

• Cant correctly install Lazarus

  - by user206316

  I have a little problem with installing and running Lazarus. I just upgrade ubuntu from 13.04 to 13.10. When i had 13.04, i could install lazarus without any problems, but in 13.10 lazarus magicaly dissapeared, and when i tried install it from ubuntu software center, it said something like in my software resources lazarus-ide-0.9.30.4 doesnt exist. After some research on net i tried delete all files from earlier installations, download deb packages from sourceforge and install them, but when i want to instal fpc-src, error shows up with output: (Reading database ... 100% (Reading database ... 239063 files and directories currently installed.) Unpacking fpc-src (from .../Stiahnut/Lazarus/fpc-src.deb) ... dpkg: error processing /home/richi/Stiahnut/Lazarus/fpc-src.deb (--install): trying to overwrite '/usr/share/fpcsrc/2.6.2/rtl/nativent/tthread.inc', which is also in package fpc-source-2.6.2 2.6.2-5 dpkg-deb (subprocess): decompressing archive member: internal gzip write error: Broken pipe dpkg-deb: error: subprocess <decompress> returned error exit status 2 dpkg-deb (subprocess): cannot copy archive member from '/home/richi/Stiahnut/Lazarus/fpc-src.deb' to decompressor pipe: failed to write (Broken pipe) when i started lazarus, it of course tell me that it cant find fpc compier and fpc sources. So, please, i really need program for school and i dont wanna reinstall os anymore or something like that :( (Ubuntu 13.10 64bit) P.S: im not skilled in linux so if u know some commands to fix it just write them for copy and paste :) P.P.S:Sorry for bad English, im Slovak xD P.P.P.S: Thank so much for any answers update: output from sudo dpkg -l | grep "^rc" richi@Richi-Ubuntu:~/lazarus1.0.12$ sudo dpkg -l | grep "^rc" rc account-plugin-generic-oauth 0.10bzr13.03.26-0ubuntu1.1 amd64 GNOME Control Center account plugin for single signon - generic OAuth rc appmenu-gtk:amd64 12.10.3daily13.04.03-0ubuntu1 amd64 Export GTK menus over DBus rc appmenu-gtk3:amd64 12.10.3daily13.04.03-0ubuntu1 amd64 Export GTK menus over DBus rc fp-compiler-2.6.0 2.6.0-9 amd64 Free Pascal - compiler rc fp-utils-2.6.0 2.6.0-9 amd64 Free Pascal - utilities rc lazarus-ide-0.9.30.4 0.9.30.4-4 amd64 IDE for Free Pascal - common IDE files rc lazarus-ide-1.0.10 1.0.10+dfsg-1 amd64 IDE for Free Pascal - common IDE files rc lcl-utils-0.9.30.4 0.9.30.4-4 amd64 Lazarus Components Library - command line build tools rc lcl-utils-1.0.10 1.0.10+dfsg-1 amd64 Lazarus Components Library - command line build tools rc libbamf3-1:amd64 0.4.0daily13.06.19~13.04-0ubuntu1 amd64 Window matching library - shared library rc libboost-filesystem1.49.0 1.49.0-4 amd64 filesystem operations (portable paths, iteration over directories, etc) in C++ rc libboost-signals1.49.0 1.49.0-4 amd64 managed signals and slots library for C++ rc libboost-system1.49.0 1.49.0-4 amd64 Operating system (e.g. diagnostics support) library rc libboost-thread1.49.0 1.49.0-4 amd64 portable C++ multi-threading rc libbrlapi0.5:amd64 4.4-8ubuntu4 amd64 braille display access via BRLTTY - shared library rc libcamel-1.2-40 3.6.4-0ubuntu1.1 amd64 Evolution MIME message handling library rc libcolumbus0-0 0.4.0daily13.04.16~13.04-0ubuntu1 amd64 error tolerant matching engine - shared library rc libdns95 1:9.9.2.dfsg.P1-2ubuntu2.1 amd64 DNS Shared Library used by BIND rc libdvbpsi7 0.2.2-1 amd64 library for MPEG TS and DVB PSI tables decoding and generating rc libebackend-1.2-5 3.6.4-0ubuntu1.1 amd64 Utility library for evolution data servers rc libedata-book-1.2-15 3.6.4-0ubuntu1.1 amd64 Backend library for evolution address books rc libedata-cal-1.2-18 3.6.4-0ubuntu1.1 amd64 Backend library for evolution calendars rc libgc1c3:amd64 1:7.2d-0ubuntu5 amd64 conservative garbage collector for C and C++ rc libgd2-xpm:amd64 2.0.36~rc1~dfsg-6.1ubuntu1 amd64 GD Graphics Library version 2 rc libgd2-xpm:i386 2.0.36~rc1~dfsg-6.1ubuntu1 i386 GD Graphics Library version 2 rc libgnome-desktop-3-4 3.6.3-0ubuntu1 amd64 Utility library for loading .desktop files - runtime files rc libgphoto2-2:amd64 2.4.14-2 amd64 gphoto2 digital camera library rc libgphoto2-2:i386 2.4.14-2 i386 gphoto2 digital camera library rc libgphoto2-port0:amd64 2.4.14-2 amd64 gphoto2 digital camera port library rc libgphoto2-port0:i386 2.4.14-2 i386 gphoto2 digital camera port library rc libgtksourceview-3.0-0:amd64 3.6.3-0ubuntu1 amd64 shared libraries for the GTK+ syntax highlighting widget rc libgweather-3-1 3.6.2-0ubuntu1 amd64 GWeather shared library rc libharfbuzz0:amd64 0.9.13-1 amd64 OpenType text shaping engine rc libibus-1.0-0:amd64 1.4.2-0ubuntu2 amd64 Intelligent Input Bus - shared library rc libical0 0.48-2 amd64 iCalendar library implementation in C (runtime) rc libimobiledevice3 1.1.4-1ubuntu6.2 amd64 Library for communicating with the iPhone and iPod Touch rc libisc92 1:9.9.2.dfsg.P1-2ubuntu2.1 amd64 ISC Shared Library used by BIND rc libkms1:amd64 2.4.46-1 amd64 Userspace interface to kernel DRM buffer management rc libllvm3.2:i386 1:3.2repack-7ubuntu1 i386 Low-Level Virtual Machine (LLVM), runtime library rc libmikmod2:amd64 3.1.12-5 amd64 Portable sound library rc libpackagekit-glib2-14:amd64 0.7.6-3ubuntu1 amd64 Library for accessing PackageKit using GLib rc libpoppler28:amd64 0.20.5-1ubuntu3 amd64 PDF rendering library rc libraw5:amd64 0.14.7-0ubuntu1.13.04.2 amd64 raw image decoder library rc librhythmbox-core6 2.98-0ubuntu5 amd64 support library for the rhythmbox music player rc libsdl-mixer1.2:amd64 1.2.12-7ubuntu1 amd64 Mixer library for Simple DirectMedia Layer 1.2, libraries rc libsnmp15 5.4.3~dfsg-2.7ubuntu1 amd64 SNMP (Simple Network Management Protocol) library rc libsyncdaemon-1.0-1 4.2.0-0ubuntu1 amd64 Ubuntu One synchronization daemon library rc libunity-core-6.0-5 7.0.0daily13.06.19~13.04-0ubuntu1 amd64 Core library for the Unity interface. rc libusb-0.1-4:i386 2:0.1.12-23.2ubuntu1 i386 userspace USB programming library rc libwayland0:amd64 1.0.5-0ubuntu1 amd64 wayland compositor infrastructure - shared libraries rc linux-image-3.8.0-19-generic 3.8.0-19.30 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-3.8.0-31-generic 3.8.0-31.46 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-19-generic 3.8.0-19.30 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-31-generic 3.8.0-31.46 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc screen-resolution-extra 0.15ubuntu1 all Extension for the GNOME screen resolution applet rc unity-common 7.0.0daily13.06.19~13.04-0ubuntu1 all Common files for the Unity interface.

  Read the article

• Comments on Comments

  - by Joe Mayo

  I almost tweeted a reply to Capar Kleijne's question about comments on Twitter, but realized that my opinion exceeded 140 characters. The following is based upon my experience with extremes and approaches that I find useful in code comments. There are a couple extremes that I've seen and reasons why people go the distance in each approach. The most common extreme is no comments in the code at all.  A few bad reasons why this happens is because a developer is in a hurry, sloppy, or is interested in job preservation. The unfortunate result is that the code is difficult to understand and hard to maintain. The drawbacks to no comments in code are a primary reason why teachers drill the need for commenting code into our heads.  This viewpoint assumes the lack of comments are bad because the code is bad, but there is another reason for not commenting that is gaining more popularity. I've heard/and read that code should be self documenting. Following this thought pattern, if code is well written with meaningful names, there should not be a reason for comments.  An addendum to this argument is that comments are often neglected and get out-of-date, but the code is what is kept up-to-date. Presumably, if code contained very good naming, it would be easy to maintain.  This is a noble perspective and I like the practice of meaningful naming of identifiers. However, I think it's also an extreme approach that doesn't cover important cases.  i.e. If an identifier is named badly (subjective differences in opinion) or not changed appropriately during maintenance, then the badly named identifier is no more useful than a stale comment. These were the two no-comment extremes, so let's look at the too many comments extreme. On a regular basis, I'll see cases where the code is over-commented; not nearly as often as the no-comment scenarios, but still prevalent.  These are examples of where every single line in the code is commented.  These comments make the code harder to read because they get in the way of the algorithm.  In most cases, the comments parrot what each line of code does.  If a developer understands the language, then most statements are immediately intuitive.  i.e. what use is it to say that I'm assigning foo to bar when it's clear what the code is doing. I think that over-commenting code is a waste of time that slows down initial development and maintenance.  Understandably, the developer's intentions are admirable because they've had it beaten into their heads that they must comment. However, I think it's an extreme and prefer a more moderate approach. I don't think the extremes do justice to code because each can make maintenance harder.  No comments on bad code is obviously a problem, but the other two extremes are subtle and require qualification to address properly. The problem I see with the code-as-documentation approach is that it doesn't lift the developer out of the algorithm to identify dependencies, intentions, and hacks. Any developer can read code and follow an algorithm, but they still need to know where it fits into the big picture of the application. Because of indirections with language features like interfaces, delegates, and virtual members, code can become complex.  Occasionally, it's useful to point out a nuance or reason why a piece of code is there. i.e. If you've building an app that communicates via HTTP, you'll have certain headers to include for the endpoint, and it could be useful to point out why the code for setting those header values is there and how they affect the application. An argument against this could be that you should extract that code into a separate method with a meaningful name to describe the scenario.  My problem with such an approach would be that your code base becomes even more difficult to navigate and work with because you have all of this extra code just to make the code more meaningful. My opinion is that a simple and well-stated comment stating the reasons and intention for the code is more natural and convenient to the initial developer and maintainer.  I just don't agree with the approach of going out of the way to avoid making a comment.  I'm also concerned that some developers would take this approach as an excuse to not comment their bad code. Another area where I like comments is on documentation comments.  Java has it and so does C# and VB.  It's convenient because we can build automated tools that extract these comments.  These extracted comments are often much better than no documentation at all.  The "go read the code" answer always doesn't fulfill the need for a quick summary of an API. To summarize, I think that the extremes of no comments and too many comments are less than desirable approaches. I prefer documentation comments to explain each class and member (API level) and code comments as necessary to supplement well-written code. Joe

  Read the article

• Entity Framework v1 &hellip; Brief Synopsis and Tips &ndash; Part 2

  - by Rohit Gupta

  Using Entity Framework with ASMX Web sErvices and WCF Web Service: If you use ASMX WebService to expose Entity objects from Entity Framework... then the ASMX Webservice does not  include object graphs, one work around is to use Facade pattern or to use WCF Service. The other important aspect of using ASMX Web Services along with Entity Framework is that the ASMX Client is not aware of the existence of EF v1 since the client solely deals with C# objects (not EntityObjects or ObjectContext). Since the client is not aware of the ObjectContext hence the client cannot participate in change tracking since the client only receives the Current Values and not the Orginal values when the service sends the the Entity objects to the client. Thus there are 2 drawbacks to using EntityFramework with ASMX Web Service: 1. Object state is not maintained... so to overcome this limitation we need insert/update single entity at a time and retrieve the original values for the entity being updated on the server/service end before calling Save Changes. 2. ASMX does not maintain object graphs... i.e. Customer.Reservations or Customer.Reservations.Trip relationships are not maintained. Thus you need to send these relationships separately from service to client. WCF Web Service overcomes the object graph limitation of ASMX Web Service, but we need to insure that we are populating all the non-null scalar properties of all the objects in the object graph before calling Update. WCF Web service still cannot overcome the second limitation of tracking changes to entities at the client end. Also note that the "Customer" class in the Client is very different from the "Customer" class in the Entity Framework Model Entities. They are incompatible with each other hence we cannot cast one to the other. However the .NET Framework translates the client "Customer" Entity to the EFv1 Model "customer" Entity once the entity is serialzed back on the ASMX server end. If you need change tracking enabled on the client then we need to use WCF Data Services which is available with VS 2010. ====================================================================================================== In WCF when adding an object that has relationships, the framework assumes that every object in the object graph needs to be added to store. for e.g. in a Customer.Reservations.Trip object graph, when a Customer Entity is added to the store, the EFv1 assumes that it needs to a add a Reservations collection and also Trips for each Reservation. Thus if we need to use existing Trips for reservations then we need to insure that we null out the Trip object reference from Reservations and set the TripReference to the EntityKey of the desired Trip instead. ====================================================================================================== Understanding Relationships and Associations in EFv1 The Golden Rule of EF is that it does not load entities/relationships unless you ask it to explicitly do so. However there is 1 exception to this rule. This exception happens when you attach/detach entities from the ObjectContext. If you detach an Entity in a ObjectGraph from the ObjectContext, then the ObjectContext removes the ObjectStateEntry for this Entity and all the relationship Objects associated with this Entity. For e.g. in a Customer.Order.OrderDetails if the Customer Entity is detached from the ObjectContext then you cannot traverse to the Order and OrderDetails Entities (that still exist in the ObjectContext) from the Customer Entity(which does not exist in the Object Context) Conversely, if you JOIN a entity that is not in the ObjectContext with a Entity that is in the ObjContext then the First Entity will automatically be added to the ObjContext since relationships for the 2 Entities need to exist in the ObjContext. ========================================================= You cannot attach an EntityCollection to an entity through its navigation property for e.g. you cannot code myContact.Addresses = myAddressEntityCollection ========================================================== Cascade Deletes in EDM: The Designer does not support specifying cascase deletes for a Entity. To enable cascasde deletes on a Entity in EDM use the Association definition in CSDL for the Entity. for e.g. SalesOrderDetail (SOD) has a Foreign Key relationship with SalesOrderHeader (SalesOrderHeader 1 : SalesOrderDetail *) if you specify a cascade Delete on SalesOrderHeader Entity then calling deleteObject on SalesOrderHeader (SOH) Entity will send delete commands for SOH record and all the SOD records that reference the SOH record. ========================================================== As a good design practise, if you use Cascade Deletes insure that Cascade delete facet is used both in the EDM as well as in the database. Even though it is not absolutely mandatory to have Cascade deletes on both Database and EDM (since you can see that just the Cascade delete spec on the SOH Entity in EDM will insure that SOH record and all related SOD records will be deleted from the database ... even though you dont have cascade delete configured in the database in the SOD table) ============================================================== Maintaining relationships in Code When Setting a Navigation property of a Entity (for e.g. setting the Contact Navigation property of Address Entity) the following rules apply : If both objects are detached, no relationship object will be created. You are simply setting a property the CLR way. If both objects are attached, a relationship object will be created. If only one of the objects is attached, the other will become attached and a relationship object will be created. If that detached object is new, when it is attached to the context its EntityState will be Added. One important rule to remember regarding synchronizing the EntityReference.Value and EntityReference.EntityKey properties is that when attaching an Entity which has a EntityReference (e.g. Address Entity with ContactReference) the Value property will take precedence and if the Value and EntityKey are out of sync, the EntityKey will be updated to match the Value. ====================================================== If you call .Load() method on a detached Entity then the .Load() operation will throw an exception. There is one exception to this rule. If you load entities using MergeOption.NoTracking, you will be able to call .Load() on such entities since these Entities are accessible by the ObjectContext. So the bottomline is that we need Objectontext to be able to call .Load() method to do deffered loading on EntityReference or EntityCollection. Another rule to remember is that you cannot call .Load() on entities that have a EntityState.Added State since the ObjectContext uses the EntityKey of the Primary (Parent) Entity when loading the related (Child) Entity (and not the EntityKey of the child (even if the EntityKey of the child is present before calling .Load()) ====================================================== You can use ObjContext.Add() to add a entity to the ObjContext and set the EntityState of the new Entity to EntityState.Added. here no relationships are added/updated. You can also use EntityCollection.Add() method to add an entity to another entity's related EntityCollection for e.g. contact has a Addresses EntityCollection so to add a new address use contact.Addresses.Add(newAddress) to add a new address to the Addresses EntityCollection. Note that if the entity does not already exist in the ObjectContext then calling contact.Addresses.Add(myAddress) will cause a new Address Entity to be added to the ObjContext with EntityState.Added and it will also add a RelationshipEntry (a relationship object) with EntityState.Added which connects the Contact (contact) with the new address newAddress. Note that if the entity already exists in the Objectcontext (being part theOtherContact.Addresses Collection), then calling contact.Addresses.Add(existingAddress) will add 2 RelationshipEntry objects to the ObjectStateEntry Collection, one with EntityState.Deleted and the other with EntityState.Added. This implies that the existingAddress Entity is removed from the theOtherContact.Addresses Collection and Added to the contact.Addresses Collection..effectively reassigning the address entity from the theOtherContact to "contact". This is called moving an existing entity to a new object graph. ====================================================== You usually use ObjectContext.Attach() and EntityCollection.Attach() methods usually when you need to reconstruct the ObjectGraph after deserializing the objects as received from a ASMX Web Service Client. Attach is usually used to connect existing Entities in the ObjectContext. When EntityCollection.Attach() is called the EntityState of the RelationshipEntry (the relationship object) remains as EntityState.unchanged whereas when EntityCollection.Add() method is called the EntityState of the relationship object changes to EntityState.Added or EntityState.Deleted as the situation demands. ========================================================= LINQ To Entities Tips: Select Many does Inner Join by default.   for e.g. from c in Contact from a in c.Address select c ... this will do a Inner Join between the Contacts and Addresses Table and return only those Contacts that have a Address. ======================================================== Group Joins Do LEFT Join by default. e.g. from a in Address join c in Contact ON a.Contact.ContactID == c.ContactID Into g WHERE a.CountryRegion == "US" select g; This query will do a left join on the Contact table and return contacts that have a address in "US" region The following query : from c in Contact join a in Address.Where(a1 => a1.CountryRegion == "US") on c.ContactID  equals a.Contact.ContactID into addresses select new {c, addresses} will do a left join on the Address table and return All Contacts. In these Contacts only those will have its Address EntityCollection Populated which have a Address in the "US" region, the other contacts will have 0 Addresses in the Address collection (even if addresses for those contacts exist in the database but are in a different region) ======================================================== Linq to Entities does not support DefaultIfEmpty().... instead use .Include("Address") Query Builder method to do a Left JOIN or use Group Joins if you need more control like Filtering on the Address EntityCollection of Contact Entity =================================================================== Use CreateSourceQuery() on the EntityReference or EntityCollection if you need to add filters during deferred loading of Entities (Deferred loading in EFv1 happens when you call Load() method on the EntityReference or EntityCollection. for e.g. var cust=context.Contacts.OfType<Customer>().First(); var sq = cust.Reservations.CreateSourceQuery().Where(r => r.ReservationDate > new DateTime(2008,1,1)); cust.Reservations.Attach(sq); This populates only those reservations that are older than Jan 1 2008. This is the only way (in EFv1) to Attach a Range of Entities to a EntityCollection using the Attach() method ================================================================== If you need to get the Foreign Key value for a entity e.g. to get the ContactID value from a Address Entity use this :                                address.ContactReference.EntityKey.EntityKeyValues.Where(k=> k.Key == "ContactID")

  Read the article

• Azure &ndash; Part 6 &ndash; Blob Storage Service

  - by Shaun

  When migrate your application onto the Azure one of the biggest concern would be the external files. In the original way we understood and ensure which machine and folder our application (website or web service) is located in. So that we can use the MapPath or some other methods to read and write the external files for example the images, text files or the xml files, etc. But things have been changed when we deploy them on Azure. Azure is not a server, or a single machine, it’s a set of virtual server machine running under the Azure OS. And even worse, your application might be moved between thses machines. So it’s impossible to read or write the external files on Azure. In order to resolve this issue the Windows Azure provides another storage serviec – Blob, for us. Different to the table service, the blob serivce is to be used to store text and binary data rather than the structured data. It provides two types of blobs: Block Blobs and Page Blobs. Block Blobs are optimized for streaming. They are comprised of blocks, each of which is identified by a block ID and each block can be a maximum of 4 MB in size. Page Blobs are are optimized for random read/write operations and provide the ability to write to a range of bytes in a blob. They are a collection of pages. The maximum size for a page blob is 1 TB.   In the managed library the Azure SDK allows us to communicate with the blobs through these classes CloudBlobClient, CloudBlobContainer, CloudBlockBlob and the CloudPageBlob. Similar with the table service managed library, the CloudBlobClient allows us to reach the blob service by passing our storage account information and also responsible for creating the blob container is not exist. Then from the CloudBlobContainer we can save or load the block blobs and page blobs into the CloudBlockBlob and the CloudPageBlob classes.   Let’s improve our exmaple in the previous posts – add a service method allows the user to upload the logo image. In the server side I created a method name UploadLogo with 2 parameters: email and image. Then I created the storage account from the config file. I also add the validation to ensure that the email passed in is valid. 1: var storageAccount = CloudStorageAccount.FromConfigurationSetting("DataConnectionString"); 2: var accountContext = new DynamicDataContext<Account>(storageAccount); 3:  4: // validation 5: var accountNumber = accountContext.Load() 6: .Where(a => a.Email == email) 7: .ToList() 8: .Count; 9: if (accountNumber <= 0) 10: { 11: throw new ApplicationException(string.Format("Cannot find the account with the email {0}.", email)); 12: } Then there are three steps for saving the image into the blob service. First alike the table service I created the container with a unique name and create it if it’s not exist. 1: // create the blob container for account logos if not exist 2: CloudBlobClient blobStorage = storageAccount.CreateCloudBlobClient(); 3: CloudBlobContainer container = blobStorage.GetContainerReference("account-logo"); 4: container.CreateIfNotExist(); Then, since in this example I will just send the blob access URL back to the client so I need to open the read permission on that container. 1: // configure blob container for public access 2: BlobContainerPermissions permissions = container.GetPermissions(); 3: permissions.PublicAccess = BlobContainerPublicAccessType.Container; 4: container.SetPermissions(permissions); And at the end I combine the blob resource name from the input file name and Guid, and then save it to the block blob by using the UploadByteArray method. Finally I returned the URL of this blob back to the client side. 1: // save the blob into the blob service 2: string uniqueBlobName = string.Format("{0}_{1}.jpg", email, Guid.NewGuid().ToString()); 3: CloudBlockBlob blob = container.GetBlockBlobReference(uniqueBlobName); 4: blob.UploadByteArray(image); 5:  6: return blob.Uri.ToString(); Let’s update a bit on the client side application and see the result. Here I just use my simple console application to let the user input the email and the file name of the image. If it’s OK it will show the URL of the blob on the server side so that we can see it through the web browser. Then we can see the logo I’ve just uploaded through the URL here. You may notice that the blob URL was based on the container name and the blob unique name. In the document of the Azure SDK there’s a page for the rule of naming them, but I think the simple rule would be – they must be valid as an URL address. So that you cannot name the container with dot or slash as it will break the ADO.Data Service routing rule. For exmaple if you named the blob container as Account.Logo then it will throw an exception says 400 Bad Request.   Summary In this short entity I covered the simple usage of the blob service to save the images onto Azure. Since the Azure platform does not support the file system we have to migrate our code for reading/writing files to the blob service before deploy it to Azure. In order to reducing this effort Microsoft provided a new approch named Drive, which allows us read and write the NTFS files just likes what we did before. It’s built up on the blob serivce but more properly for files accessing. I will discuss more about it in the next post.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• CodePlex Daily Summary for Tuesday, February 23, 2010

  CodePlex Daily Summary for Tuesday, February 23, 2010New Projects.NET Beginners: This project is a summary of project for first time developer and .net beginners. the aim is to provide tools and libraries to get startet with dev...A simple ASP.NET Currency / Money TextBox User Control: A ASP.NET TextBox control used with AJAX maskeditextender makes it possible to enter numbers but it's not very intuitive to use. CurrencyTextBox co...Academiki: Academik The project aims to be a university social network with content sharing and intellectual property. Academik makes it easier for students t...Acessando Campos com XPath Expression: Esse é um exemplo de como usar Xpath Expression na orchestration do Biztalk 2006. O Artigo do exemplo esta em www.biztalkbrasil.blogspot.comAg.CommandManager: A command manager implementation for Silverlights. Supports commanding to more or less any event using the ICommand interfaceApunta Notas: Apunta notas is just a note taking program that I created to learn WPF. Now you can write everything you need to remember or tell somebody. Or you...AzureKit: AzureKit provides a more direct approach to Azure's Table Service, which takes more advantage of the NoSQL nature of the storage medium.CRM 4.0 Distribute Workflow Activity: This plugin allows to execute a workflow for each entity that has a 1:N or N:N relationship to a given entity. For example: execute a workflow for...Dbg Shell: Dbg Shell replaces WinDbg for debugging dumps. All standard Dbg commands are supported. You can also write scripts in .Net assemblies to automated ...Egg Timer: Egg Timer is a very simple Windows Form application for setting short time-frame alarms.Enterprise Library Extensions: Extensions for the Microsoft Enterprise Library applications blocks which makes programming applications even easier.Event Calendar 2.0 Data Extractor: Really simple app to recover event calendar 2.0 information from iGoogle settings files and turn them into CSV format info for importing to other c...iTwiit: Silverlight Twitter Clientlibtym: Have your complete movie collection at a glance to manage all your movie files very comfortably!Metabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: The Metabolite Enterprise libraries are a set of C# Class Libraries developed for use with EPiServer 5 R2 SP2+ projects using PageTypeBuilder. They...Metro UX: Metro UXMTI: -Personal Expense Tracker: Personal Expense Tracker helps you track your expenses. I tried to find simple win forms expense tracker but found none interesting, so i made one...rarouš: repository for rarouš.weblog articlesSacDotNetUG: SacDotNetUG is an ASP.NET MVC 2 Web application intended for the Sacramento .NET user group. This project servers 2 main goals: to promote the adop...ShellLight: ShellLight is essentially a graphical shell for Silverlight applications that enables a quick auto-complete launcher for features in your solution.Sina Weibo(Microblog): sina weibo .NET libraries and applications.Terrain Independant Navigating Automaton v2.0: This is where members of the Robot Design Team from Stony Brook University come together and work on our unique TINA. This project is for a self-go...Url Rewrite.Net: Url Rewrite.Net is an open-source SEO project which contains Custom Http Module example and Custom Configrutaion Module.It is developed in C#.NET 2...WebPart and WebService Currency Converter: This is only a sample code how to get data from yahoo finance and how to implementing on Sharepoint WebPart or WebServices. This code it is freely...WPF AutoComplete TextBox Control: A AutoComplete TextBox Control written in WPF, Looks like the system built-in auto-completion(SHAutoComplete).ZWaveAPI: This project is aim to create an open class library on ZWave. It is based on article from digiWave.dk New Releases.NET Beginners: MathLab Visual Studio Project Template: First preview to a mathlab beginners library..NET Beginners: Turtle Visual Studio Project Template: The turtle engine is a very simlpe turtle which runs over a beach and leaves a track.A simple ASP.NET Currency / Money TextBox User Control: CurrencyTextBox Source v1.0: Source code with a test project.A simple ASP.NET Currency / Money TextBox User Control: CurrencyTextBox.dll: The User Control for use in projects.Acessando Campos com XPath Expression: Source Code SampleXPathExpression: O Source code contem o Projeto em Visual Studio 2005.Actipro WPF Controls Contrib: v2009.2 build 515: Minor tweaks and updated to target Actipro WPF Studio 2009.2 (build 515).Analysis Management System: 1.0.0.1 Update: Fix - Issue 4004 Nieuw - Beschikbare klanten kunnen nu bekeken worden via Extra/Aanvragers (Ctrl R)Apunta Notas: Apunta Notas 1.0 Release Candidate: There is the Release Candidate of Apunta Notas.ARSoft.Tools.Net - C# DNS and SPF Library: 1.2.0: Added asynchronous operations for DNS client.CRM 4.0 Distribute Workflow Activity: Beta: Initial release. Complete functionality, limited testing.Dbg Shell: First Public Release: First ReleaseDnDns and PocketDnDns - A .NET DNS Client Resolver Library: DnDns Library Release 2: A DNS protocol library written completely in managed code (C#). Supports common DNS records types like A, CNAME, MX, SRV, and more. Works on Window...Egg Timer: Egg Timer v1.0: Pretty simple application. Set the time directly or use the 5 minute and 1 hour increment/decrement buttons.EnhSim: EnhSim v1.9.7.2 BETA: 1.9.7.2 BETAImportant!: This beta version includes the changes to the Flame shock damage-over-time component which are currently on the PTR. Downlo...EnhSim: EnhSim v1.9.7.3 BETA: Important!: This beta version includes the changes to the Flame shock damage-over-time component which are currently on the PTR. Download 1.9.7.1 f...Esendex SMS SDK and Downloads for Microsoft.NET languages: Esendex .NET SDK v0.4.0: Features Messaging Service: Send a single SMS message and multiple SMS messages. Send a single Voice Message and multiple Voice Messages. Send...Event Calendar 2.0 Data Extractor: V1.0: First ever build of extractorExcelDna: ExcelDna Version 0.22: An important bugfix release that fixes a critical bug in the MultiThreaded marshaling support (under Excel 2007).InfoService: InfoService v1.5 Beta 8: InfoService Beta Release Please note this is a BETA. It should be stable, but i can't gurantee that! So use it on your own risk. Please read Plugi...Krypton Palette Selectors: Release 1.2: Adds the new KryptonPaletteContextMenu and refactors the KryptonPaletteDropButton to use it.kuuy static system: kss_v1.0beta: kuuy static sytem 1.0 beta editionlibtym: libtym: First public release version. Full functionality, tested. Please notify about bugs.mojoPortal: 2.3.3.9: see release notes on mojoPortal.com http://www.mojoportal.com/mojoportal-2339-released.aspx This release makes it easy to use Artisteer html templa...Net Tool: v1.01: User interface has been changedOpen NFSe: Open NFSe 0.1 (Salvador): Open NFSe 0.1 (Salvador)Paint.NET PSD Plugin: 1.0.7: Further substantial improvements in speed of both loading and saving. In particular, loading is about 5x as fast as in version 1.0.6. Saving is ...Project Starlight: 2.0: Release 2.0 final Changes: -Numerous stability fixes -Firefox 3.5 support -Safari 64 bit support (Snow Leopard) Mac and Windows Binaries are avai...RoTwee: RoTwee 5.0.0.1: This version fix for 16620Secure Data: Secure Data 2010.02.22.01: This version has been rewritten and contains many enhancements and I encourage anyone interested to download the source code and work through the Q...TreeSizeNet: TreeSizeNet 0.10.1: - Complete Redesign - Improved Stability - Improved Performance - PieChart for directory contentUrl Rewrite.Net: Beta V0.1 Release: Includes : -Custom Http Module -Custom Configuration Section Module ( in web.config) -Rewriting ModuleVCC: Latest build, v2.1.30222.0: Automatic drop of latest buildWebPart and WebService Currency Converter: CurrencyConverter.zip: CurrencyConverter.zip Have 3 Project on this files: 1. Library Project 2. Load Library Project Using Web Services 3. Load Library Project Using We...WSUS Smart Approve: 1.0.0.2: Fix: 25903ZuneConsole: ZuneConsole: Console GUI for the Zune Customs library, which should make everything work. This is what you should download.ZuneConsole: ZuneConsole How-To Manual: A quick (only 9 pages lol) tutorial on how to add custom artist info to your Zune.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETDotNetNuke® Community EditionImage Resizer Powertoy Clone for WindowsMicrosoft SQL Server Community & SamplesMost Active ProjectsDinnerNow.netRawrBlogEngine.NETNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSharpyInfoServicejQuery Library for SharePoint Web ServicesPHPExcelpatterns & practices – Enterprise LibrarySharePoint Contrib

  Read the article

• SharePoint Saturday Michigan 2010 Recap, Slides, and Photos

  - by Brian Jackett

  This past weekend I attended SharePoint Saturday Michigan (SPSMI) in Ann Arbor, Michigan.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my third SharePoint Saturday attended and second I’ve spoken at.  I believe today it was announced that about 210 people total attended the event.  I was very happy with the turnout, especially the ratio of male to female attendees.  Typically with computer related conferences the ratio leans towards more males attending, but both Peter Serzo (one of conference organizers) and I both commented to each other that at the end of the day it appeared to be close to 40% women in the crowd.  So here’s my recap of the weekend. Arrival     Friday afternoon I drove up from Columbus, OH to Ann Arbor, MI and arrived around 4pm.  I was attempting to avoid the rush hour traffic and construction backups.  Turned out to be a good idea because other speakers coming up Friday got stuck on a highway which literally closed down in both directions due to a bad accident.  I was talking my friend Sean McDonough through the highway closing and this was the first time I had seen a solid black traffic line on Google Maps.  Most of us are familiar with Green, Yellow, and Red, but this line was black if that tells you how bad it got. Speaker “Dinner”     Fast forward a few hours and it was time for the speaker “dinner.”  I put “dinner” in quotes because with this night alone SPSMI set a new bar for nicest and most extravagant speaker appreciation events for SharePoint Saturday.  By tapping into some very influential contacts, the conference organizers were able to provide a truck limo (yep you heard right) with refreshments, access to an underground suite at the Palace of Auburn Hills, and courtside tickets to see the Detroit Pistons play that night.  Being a Michigan native I have to say that I was absolutely floored by this experience and very thankful to our conference organizers Peter, Sebastian, and Jesse along with Trillium Teamologies. Sessions     The actual conference started Saturday morning at 9am with the keynote by Rob Collie who is the Microsoft program manager for PowerPivot.  The day continued and I attended the following sessions: Mike Watson (@mikewat) – “SharePoint 2010 Fight Night: Devs vs. Admins” Karl Swedeberg (@kswedberg) – “A Walk on the Client Side with jQuery“ [my session] Brian Jackett (@briantjackett) - “Real World Deployment of SharePoint 2007 Solutions” Jeff Willinger (@jwillie) - “Social Computing and Collaboration Inside and Outside the 4 Walls” Paul Schaeflein (@paulschaeflein) – “PowerShell for the SharePoint Developer” My Presentation     I had a great time presenting my session on Deploying SharePoint 2007 Solutions, but it wasn’t without its fair share of technical issues.  As my session was right after lunch I came in to my room 10 mins early to set up my laptop, slides, and demos.  As a quick background note, a few months ago I got an upgraded laptop from my company Sogeti and have been dual booting it between XP (factory installed) and Windows Server 2008 R2 w/ Hyper-V.  As such I had prepared all of my demo virtual machines to run under Hyper-V.  About 3 minutes before my session was scheduled to start though it became apparent that I did not have the correct display drivers to connect Windows Server 2008 R2 to the projector…     As you can imagine this was a slight cause for concern as I was potentially going to be unable to give my presentation.  Luckily for me I usually prepare for such unforeseen issues and had my presentation and some spare VMs that would run on XP on my external hard drive.  Knowing this I rebooted my machine into XP and began my presentation without slides until about 5 mins into the session when everything was up and running on XP.  Despite this being the first time I gave this presentation I have to say it was one of my favorites I’ve given so far.  The audience was very engaged in the session and I received some great, positive feedback afterwards.  Thanks to all who attended my session, I appreciate it very much. Link to Presentation Files     For those of you who attended my session and would like my slides or demo PowerShell scripts they can be found on my SkyDrive at the link below.  Also, if you have a few minutes and wouldn’t mind rating my session I have this session posted on SpeakerRate.  As speakers we always appreciate any and all feedback attendees offer, so thank you if you are able to provide any. SkyDrive folder with session files Rate my SharePoint 2007 Solutions session   Picture Albums     For everyone else, here are my pictures from the weekend.  The first link is to my FaceBook album which will have tagging (recommend this one.)  The second is to my Live album if you care for higher resolution images. http://www.facebook.com/album.php?aid=2154482&id=21905041&l=a3fb72ee8c View Full Album Conclusion     A big thank you goes out to all of the organizers, speakers, sponsors, and attendees of SPSMI.  As I’ve said so many times, without each and every one of you these events wouldn’t be possible.  I thoroughly enjoyed this trip back to my home state and presenting a new session.  For those interested in my upcoming schedule I will be giving two sessions on PowerShell at SharePoint Saturday Charlotte in April, helping plan Stir Trek: Iron Man Edition in May, and I’m submitting sessions to Day of .Net Ann Arbor in May as well.  Beyond that I haven’t planned out any travels.  Thanks for reading my recap.  Look forward to more technical posts now that I have a short break in conferences.         -Frog Out   links: Michigan image

  Read the article

• To ORM or Not to ORM. That is the question&hellip;

  - by Patrick Liekhus

  UPDATE:  Thanks for the feedback and comments.  I have adjusted my table below with your recommendations.  I had missed a point or two. I wanted to do a series on creating an entire project using the EDMX XAF code generation and the SpecFlow BDD Easy Test tools discussed in my earlier posts, but I thought it would be appropriate to start with a simple comparison and reasoning on why I choose to use these tools. Let’s start by defining the term ORM, or Object-Relational Mapping.  According to Wikipedia it is defined as the following: Object-relational mapping (ORM, O/RM, and O/R mapping) in computer software is a programming technique for converting data between incompatible type systems in object-oriented programming languages. This creates, in effect, a "virtual object database" that can be used from within the programming language. Why should you care?  Basically it allows you to map your business objects in code to their persistence layer behind them. And better yet, why would you want to do this?  Let me outline it in the following points: Development speed.  No more need to map repetitive tasks query results to object members.  Once the map is created the code is rendered for you. Persistence portability.  The ORM knows how to map SQL specific syntax for the persistence engine you choose.  It does not matter if it is SQL Server, Oracle and another database of your choosing. Standard/Boilerplate code is simplified.  The basic CRUD operations are consistent and case use database metadata for basic operations. So how does this help?  Well, let’s compare some of the ORM tools that I have used and/or researched.  I have been interested in ORM for some time now.  My ORM of choice for a long time was NHibernate and I still believe it has a strong case in some business situations.  However, you have to take business considerations into account and the law of diminishing returns.  Because of these two factors, my recent activity and experience has been around DevExpress eXpress Persistence Objects (XPO).  The primary reason for this is because they have the DevExpress eXpress Application Framework (XAF) that sits on top of XPO.  With this added value, the data model can be created (either database first of code first) and the Web and Windows client can be created from these maps.  While out of the box they provide some simple list and detail screens, you can verify easily extend and modify these to your liking.  DevExpress has done a tremendous job of providing enough framework while also staying out of the way when you need to extend it.  This sounds worse than it really is.  What I mean by this is that if you choose to follow DevExpress coding style and recommendations, the hooks and extension points provided allow you to do some pretty heavy lifting while also not worrying about the basics. I have put together a list of the top features that I have used to compare the limited list of ORM’s that I have exposure with.  Again, the biggest selling point in my opinion is that XPO is just a solid as any of the other ORM’s but with the added layer of XAF they become unstoppable.  And then couple that with the EDMX modeling tools and code generation, it becomes a no brainer. Designer Features Entity Framework NHibernate Fluent w/ Nhibernate Telerik OpenAccess DevExpress XPO DevExpress XPO/XAF plus Liekhus Tools Uses XML to map relationships - Yes - - -   Visual class designer interface Yes - - - - Yes Management integrated w/ Visual Studio Yes - - Yes - Yes Supports schema first approach Yes - - Yes - Yes Supports model first approach Yes - - Yes Yes Yes Supports code first approach Yes Yes Yes Yes Yes Yes Attribute driven coding style Yes - Yes - Yes Yes                 I have a very small team and limited resources with a lot of responsibilities.  In order to keep up with our customers, we must rely on tools like these.  We use the EDMX tool so that we can create a visual representation of the applications with our customers.  Second, we rely on the code generation so that we can focus on the business problems at hand and not whether a field is mapped correctly.  This keeps us from requiring as many junior level developers on our team.  I have also worked on multiple teams where they believed in writing their own “framework”.  In my experiences and opinion this is not the route to take unless you have a team dedicated to supporting just the framework.  Each time that I have worked on custom frameworks, the framework eventually becomes old, out dated and full of “performance” enhancements specific to one or two requirements.  With an ORM, there are a lot smarter people than me working on the bigger issue of persistence and performance.  Again, my recommendation would be to use an available framework and get to working on your business domain problems.  If your coding is not making money for you, why are you working on it?  Do you really need to be writing query to object member code again and again? Thanks

  Read the article

• The Low Down Dirty Azure Blues

  - by SGWellens

  Remember the SETI screen savers that used to be on everyone's computer? As far I as know, it was the first bona-fide use of "Cloud" computing…albeit an ad hoc cloud. I still think it was a brilliant leveraging of computing power. My interest in clouds was re-piqued when I went to a technical seminar at the local .Net User Group. The speaker was Mike Benkovitch and he expounded magnificently on the virtues of the Azure platform. Mike always does a good job. One killer reason he gave for cloud computing is instant scalability. Not applicable for most applications, but it is there if needed. I have a bunch of files stored on Microsoft's SkyDrive platform which is cloud storage. It is painfully slow. Accessing a file means going through layers and layers of software, redirections and security. Am I complaining? Hell no! It's free! So my opinions of Cloud Computing are both skeptical and appreciative. What intrigued me at the seminar, in addition to its other features, is that Azure can serve as a web hosting platform. I have a client with an Asp.Net web site I developed who is not happy with the performance of their current hosting service. I checked the cost of Azure and since the site has low bandwidth/space requirements the cost would be competitive with the existing host provider: Azure Pricing Calculator. And, Azure has a three month free trial. Perfect! I could try moving the website and see how it works for free. I went through the signup process. Everything was proceeding fine until I went to the MS SQL database management screen. A popup window informed me that I needed to install Silverlight on my machine. Silverlight? No thanks. Buh-Bye. I half-heartedly found the Azure support button and logged a ticket telling them I didn't want Silverlight on my machine. Within 4 to 6 hours (and a myriad (5) of automated support emails) they sent me a link to a database management page that did not require Silverlight. Thanks! I was able to create a database immediately. One really nice feature was that after creating the database, I was given a list of connection strings. I went to the current host provider, made a backup of the database and saved it to my machine. I attached to the remote database using SQL Server Studio 2012 and looked for the Restore menu item. It was missing. So I tried using the SQL command: RESTORE DATABASE MyDatabase FROM DISK ='C:\temp\MyBackup.bak' Msg 40510, Level 16, State 1, Line 1 Statement 'RESTORE DATABASE' is not supported in this version of SQL Server. Are you kidding me? Why on earth…? This can't be happening! I opened both the source database and destination database in SQL Management Studio. I right clicked the source database, selected "Tasks" and noticed a menu selection called "Deploy Database to SQL Azure" Are you kidding me? Could it be? Oh yes, it be! There was a small problem because the database already existed on the Azure machine, I deployed to a new name, deleted the existing database and renamed the deployed database to what I needed. It was ridiculously easy. Being able to attach SQL Management Studio to remote databases is an awesome but scary feature. You can limit the IP addresses that can access the database which enhances security but when you give people, any people, me included, that much power, one errant mouse click could bring a live system down. My Advice: Tread softly and carry a large backup thumb-drive. Then I created a web site, the URL it returned look something like this: http://MyWebSite.azurewebsites.net/ Azure supports FTP, but I couldn't figure out the settings until I downloaded the publishing profile. It was an XML file that contained the needed information. I still couldn't connect with my FTP client (FileZilla). After about an hour of messing around, I deleted the port number from the FileZilla setup page….and voila, I was in like Flynn.   There are other options of deploying directly from Visual Studio, TFS, etc. but I do not like integrated tools that do things without my asking: It's usually hard to figure out what they did and how to undo it. I uploaded the aspx , cs , webconfig, etc. files. Bu it didn't run. The site I ported was in .NET 3.5. The Azure website configuration page gave me a choice between .NET 2.0 and 4.0. So, I switched to Visual Studio 2010, chose .NET 4.0 and upgraded the site. Of course I have the original version completely backed up and stored in a granite cave beneath the Nevada desert. And I have a backup CD under my pillow. The site uses ReportViewer to generate PDF documents. Of course it was the wrong version. I removed the old references to version 9 and added new references to version 10 (*see note below). Since the DLLs were not on the Azure Server, I uploaded them to the bin directory, crossed my fingers, burned some incense and gave it a try. After some fiddling around it ran. I don't know if I did anything particular to make it work or it just needed time to sort things out. However, one critical feature didn't work: ReportViewer could not programmatically generate PDF documents. I was getting this exception: "An error occurred during local report processing. Parameter is not valid." Rats. I did some searching and found other people were having the same problem, so I added a post saying I was having the same problem: http://social.msdn.microsoft.com/Forums/en-US/windowsazurewebsitespreview/thread/b4a6eb43-0013-435f-9d11-00ee26a8d017 Currently they are looking into this problem and I am waiting for the results. Hence I had the time to write this BLOG entry. How lucky you are. This was the last message I got from the Microsoft person: Hi Steve, Windows Azure Web Sites is a multi-tenant environment. For security issue, we limited some API calls. Unfortunately, some GDI APIS required by the PDF converting function are in this list. We have noticed this issue, and still investigation the best way to go. At this moment, there is no news to share. Sorry about this. Will keep you posted. If I had to guess, I would say they are concerned with people uploading images and doing intensive graphics programming which would hog CPU time.  But that is just a guess. Another problem. While trying to resolve the ReportViewer problem, I tried to write a file to the PDF directory to see if there was a permissions problem with some test code: String MyPath = MapPath(@"~\PDFs\Test.txt"); File.WriteAllText(MyPath, "Hello Azure");     I got this message: Access to the path <my path> is denied. After some research, I understood that since Azure is a cloud based platform, it can't allow web applications to save files to local directories. The application could be moved or replicated as scaling occurs and trying to manage local files would be problematic to say the least. There are other options: Use the Azure APIs to get a path. That way the location of the storage is separated from the application. However, the web site is then tied Azure and can't be moved to another hosting platform. Use the ApplicationData folder (not recommended). Write to BLOB storage. Or, I could try and stream the PDF output directly to the email and not save a file. I'm not going to work on a final solution until the ReportViewer is fixed. I am just sharing some of the things you need to be aware of if you decide to use Azure. I got this information from here. (Note the author of the BLOG added a comment saying he has updated his entry). Is my memory faulty? While getting this BLOG ready, I tried to write the test file again. And it worked. My memory is incorrect, or much more likely, something changed on the server…perhaps while they are trying to get ReportViewer to work. (Anyway, that's my story and I'm sticking to it). *Note: Since Visual Studio 2010 Express doesn't include a Report Editor, I downloaded and installed SQL Server Report Builder 2.0. It is a standalone Report Editor to replace the one not in Visual Studio 2010 Express. I hope someone finds this useful. Steve Wellens CodeProject

  Read the article

• How to create a new Team Project Collection in TFS2010:

  - by jehan

  TFS 2010 has introduced the notion of Team Project Collection (TPC).  I have already discussed about TPC in my earlier post, you can check it out here. In this post, I will demonstrate how to create a new Team Project Collection in TFS2010. First, you have to open the TFS Administration Console (Start à All Programs à Microsoft Team Foundation Server 2010 à Team Foundation Server Administration Console), expand the Application Tier node in TFS Administration Console and click on Team Project Collection. Here you will see the TPC’s which are already exist, I am having only one TPC named New Collection and I’m going to create a new TPC called Demo Collection. To create a new Team Project Collection, you need to click on Create Collection; it will open the Create New Team Project Collection window.     Under the Name tab, you have to enter the name of Collection which you want to give for your new TPC (I naming it as Demo Collection). You can also provide some description about your TPC in Description tab which is optional and click next. Here, you need to enter the name of SQL Server Instance where you want your new TPC data to reside. You have the option either to choose the creating a Database for this TPC or use the already existing empty database and then click next.   In next screen, you have to choose SharePoint configuration. Here you have the options to either configure SharePoint Site for TPC at default collections or you can specify the your existing SharePoint site and  you can also choose not  to configure the SharePoint for this collection, if you choose last option then you cannot configure the Share Point sites for the all the Team Projects under this Project Collection. You also have the flexibility to create a Share Point site for this TPC later on, then if you need you have to configure SharePoint site for the existing team projects manually.   In next screen, you will have the Reports configuration. Here you have the options to either configure the Reports for TPC at default path or you can specify the path for at existing Reports folder, you can also choose not to configure the Reports for this collection, if you choose last option then you cannot create  the Reports  for the all the Team Projects under this Project Collection. Here also you can enable reporting for this TPC later on. The next screen is related to Lab Management Configuration, Lab Management is the new feature in TFS2010 which enables the users to create and manage virtual test environments where you can deploy and test your application. There are no options available here as I don’t have the Lab Management configured for my Team Foundation Server. The next screen is Review Configuration window, which will show up all the configuration settings you have specified, so that you can review the configurations before creating the Team Project Collection. If you want to make any changes to the configurations then you can go back to the previous windows and can make the changes. After Reviewing the configuration settings, you can click on verify button. Which will verify that if you’re Team Project Collection is ready to be created or not, it will show up the errors and warning (if any) which can make your Team Project Collection fail. You can then choose to create the Team Project Collection if the verify option doesn’t throw any warnings and errors. If the verify option throws any errors, then it is strongly suggested that you have to first rectify the issues then only go for TPC creation especially in case of warnings as it is a common practice to overlook the warnings.   If you choose the create TPC option, then it will start the process of creating a Team Project Collection  and once its completed you can check the status of configuration different components  during Team Project Collection. You can see in below screen that all the components are configured successfully.   In next screen, you can find the location of log file created for this Team Project Creation, this log file is really important in case of Team Project creation failure because it will help you to find  the root cause for the failure. Now, you can see that the New Team Projection (Demo Collection) which was created is now available in Team Foundation Collection tab and its status is Online.   You can now try to connect to this Team Project Collection from Team Explorer. Choose the newly created Team Project Collection and click on connect.     This Team Project Collection is empty because no Team Projects are created yet. Now, you can create the new Team Projects and start working.

  Read the article

• Testing Mobile Websites with Adobe Shadow

  - by dwahlin

  It’s no surprise that mobile development is all the rage these days. With all of the new mobile devices being released nearly every day the ability for developers to deliver mobile solutions is more important than ever. Nearly every developer or company I’ve talked to recently about mobile development in training classes, at conferences, and on consulting projects says that they need to find a solution to get existing websites into the mobile space. Although there are several different frameworks out there that can be used such as jQuery Mobile, Sencha Touch, jQTouch, and others, how do you test how your site renders on iOS, Android, Blackberry, Windows Phone, and the variety of mobile form factors out there? Although there are different virtual solutions that can be used including Electric Plum for iOS, emulators, browser plugins for resizing the laptop/desktop browser, and more, at some point you need to test on as many physical devices as possible. This can be extremely challenging and quite time consuming though especially when you consider that you have to manually enter URLs into devices and click links on each one to drill-down into sites. Adobe Labs just released a product called Adobe Shadow (thanks to Kurt Sprinzl for letting me know about it) that significantly simplifies testing sites on physical devices, debugging problems you find, and even making live modifications to HTML and CSS content while viewing a site on the device to see how rendering changes. You can view a page in your laptop/desktop browser and have it automatically pushed to all of your devices without actually touching the device (a huge time saver). See a problem with a device? Locate it using the free Chrome extension, pull up inspection tools (based on the Chrome Developer tools) and make live changes through Chrome that appear on the respective device so that it’s easy to identify how problems can be resolved. I’ve been using Adobe Shadow and am very impressed with the amount of time saved and the different features that it offers. In the rest of the post I’ll walk through how to get it installed, get it started, and use it to view and debug pages.   Getting Adobe Shadow Installed The following steps can be used to get Adobe Shadow installed: 1. Download and install Adobe Shadow on your laptop/desktop 2. Install the Adobe Shadow extension for Chrome 3. Install the Adobe Shadow app on all of your devices (you can find it in various app stores) 4. Connect your devices to Wifi. Make sure they’re on the same network that your laptop/desktop machine is on   Getting Adobe Shadow Started Once Adobe Shadow is installed, you’ll need to get it running on your laptop/desktop and on all your mobile devices. The following steps walk through that process: 1. Start the Adobe Shadow application on your laptop/desktop 2. Start the Adobe Shadow app on each of your mobile devices 3. Locate the laptop/desktop name in the list that’s shown on each mobile device: 4. Select the laptop/desktop name and a passcode will be shown: 5. Open the Adobe Shadow Chrome extension on the laptop/desktop and enter the passcode for the given device: Using Adobe Shadow to View and Modify Pages Once Adobe Shadow is up and running on your laptop/desktop and on all of your mobile devices you can navigate to a page in Chrome on the laptop/desktop and it will automatically be pushed out to all connected mobile devices. If you have 5 mobile devices setup they’ll all navigate to the page displayed in Chrome (pretty awesome!). This makes it super easy to see how a given page looks on your iPad, Android device, etc. without having to touch the device itself. If you find a problem with a page on a device you can select the device in the Chrome Adobe Shadow extension on your laptop/desktop and select the remote inspector icon (it’s the < > icon): This will pull up the Adobe Shadow remote debugging window which contains the standard Chrome Developer tool tabs such as Elements, Resources, Network, etc. Click on the Elements tab to see the HTML rendered for the target device and then drill into the respective HTML content, CSS styles, etc. As HTML elements are selected in the Adobe Shadow debugging tool they’ll be highlighted on the device itself just like they would if you were debugging a page directly in Chrome with the developer tools. Here’s an example from my Android device that shows how the page looks on the device as I select different HTML elements on the laptop/desktop: Conclusion I’m really impressed with what I’ve to this point from Adobe Shadow. Controlling pages that display on devices directly from my laptop/desktop is a big time saver and the ability to remotely see changes made through the Chrome Developer Tools (on my laptop/desktop) really pushes the tool over the top. If you’re developing mobile applications it’s definitely something to check out. It’s currently free to download and use. For additional details check out the video below:  

  Read the article

• ca-certificates-java fails when trying to install openjdk-6-jre

  - by Jonas

  I use a VPS with Ubuntu Server 10.10 x64. I want to use Java and run the command sudo apt-get install openjdk-6-jre but it fails because the installation encounted errors while processing ca-certificates-java. I have tried to install the failed package with: sudo apt-get install ca-certificates-java How can I solve this? I have run sudo apt-get update and sudo apt-get upgrade but I get the same errors after that. I have also installed Ubuntu Server x64 on a VirtualBox, but the two Ubuntu Server 10.10 has different kernel versions (2.6.35 on VirtualBox and 2.6.18 on my VPS). And on VirtualBox I can install Jetty without any problems. The VPS is a fresh install of Ubuntu Server 10.10 x64, the first command I was running was sudo apt-get install openjdk-6-jre. When I run sudo apt-get install ca-certificates-java I get this message: Reading package lists... Done Building dependency tree Reading state information... Done ca-certificates-java is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Do you want to continue [Y/n]? Here I press Y then I get this message: Setting up ca-certificates-java (20100412) ... creating /etc/ssl/certs/java/cacerts... error adding brasil.gov.br/brasil.gov.br.crt error adding cacert.org/cacert.org.crt error adding debconf.org/ca.crt error adding gouv.fr/cert_igca_dsa.crt error adding gouv.fr/cert_igca_rsa.crt error adding mozilla/ABAecom_=sub.__Am._Bankers_Assn.=_Root_CA.crt error adding mozilla/AOL_Time_Warner_Root_Certification_Authority_1.crt error adding mozilla/AOL_Time_Warner_Root_Certification_Authority_2.crt error adding mozilla/AddTrust_External_Root.crt error adding mozilla/AddTrust_Low-Value_Services_Root.crt error adding mozilla/AddTrust_Public_Services_Root.crt error adding mozilla/AddTrust_Qualified_Certificates_Root.crt error adding mozilla/America_Online_Root_Certification_Authority_1.crt error adding mozilla/America_Online_Root_Certification_Authority_2.crt error adding mozilla/Baltimore_CyberTrust_Root.crt error adding mozilla/COMODO_Certification_Authority.crt error adding mozilla/COMODO_ECC_Certification_Authority.crt error adding mozilla/Camerfirma_Chambers_of_Commerce_Root.crt error adding mozilla/Camerfirma_Global_Chambersign_Root.crt error adding mozilla/Certplus_Class_2_Primary_CA.crt error adding mozilla/Certum_Root_CA.crt error adding mozilla/Comodo_AAA_Services_root.crt error adding mozilla/Comodo_Secure_Services_root.crt error adding mozilla/Comodo_Trusted_Services_root.crt error adding mozilla/DST_ACES_CA_X6.crt error adding mozilla/DST_Root_CA_X3.crt error adding mozilla/DigiCert_Assured_ID_Root_CA.crt error adding mozilla/DigiCert_Global_Root_CA.crt error adding mozilla/DigiCert_High_Assurance_EV_Root_CA.crt error adding mozilla/DigiNotar_Root_CA.crt error adding mozilla/Digital_Signature_Trust_Co._Global_CA_1.crt error adding mozilla/Digital_Signature_Trust_Co._Global_CA_2.crt error adding mozilla/Digital_Signature_Trust_Co._Global_CA_3.crt error adding mozilla/Digital_Signature_Trust_Co._Global_CA_4.crt error adding mozilla/Entrust.net_Global_Secure_Personal_CA.crt error adding mozilla/Entrust.net_Global_Secure_Server_CA.crt error adding mozilla/Entrust.net_Premium_2048_Secure_Server_CA.crt error adding mozilla/Entrust.net_Secure_Personal_CA.crt error adding mozilla/Entrust.net_Secure_Server_CA.crt error adding mozilla/Entrust_Root_Certification_Authority.crt error adding mozilla/Equifax_Secure_CA.crt error adding mozilla/Equifax_Secure_Global_eBusiness_CA.crt error adding mozilla/Equifax_Secure_eBusiness_CA_1.crt error adding mozilla/Equifax_Secure_eBusiness_CA_2.crt error adding mozilla/Firmaprofesional_Root_CA.crt error adding mozilla/GTE_CyberTrust_Global_Root.crt error adding mozilla/GTE_CyberTrust_Root_CA.crt error adding mozilla/GeoTrust_Global_CA.crt error adding mozilla/GeoTrust_Global_CA_2.crt error adding mozilla/GeoTrust_Primary_Certification_Authority.crt error adding mozilla/GeoTrust_Universal_CA.crt error adding mozilla/GeoTrust_Universal_CA_2.crt error adding mozilla/GlobalSign_Root_CA.crt error adding mozilla/GlobalSign_Root_CA_-_R2.crt error adding mozilla/Go_Daddy_Class_2_CA.crt error adding mozilla/IPS_CLASE1_root.crt error adding mozilla/IPS_CLASE3_root.crt error adding mozilla/IPS_CLASEA1_root.crt error adding mozilla/IPS_CLASEA3_root.crt error adding mozilla/IPS_Chained_CAs_root.crt error adding mozilla/IPS_Servidores_root.crt error adding mozilla/IPS_Timestamping_root.crt error adding mozilla/NetLock_Business_=Class_B=_Root.crt error adding mozilla/NetLock_Express_=Class_C=_Root.crt error adding mozilla/NetLock_Notary_=Class_A=_Root.crt error adding mozilla/NetLock_Qualified_=Class_QA=_Root.crt error adding mozilla/Network_Solutions_Certificate_Authority.crt error adding mozilla/QuoVadis_Root_CA.crt error adding mozilla/QuoVadis_Root_CA_2.crt error adding mozilla/QuoVadis_Root_CA_3.crt error adding mozilla/RSA_Root_Certificate_1.crt error adding mozilla/RSA_Security_1024_v3.crt error adding mozilla/RSA_Security_2048_v3.crt error adding mozilla/SecureTrust_CA.crt error adding mozilla/Secure_Global_CA.crt error adding mozilla/Security_Communication_Root_CA.crt error adding mozilla/Sonera_Class_1_Root_CA.crt error adding mozilla/Sonera_Class_2_Root_CA.crt error adding mozilla/Staat_der_Nederlanden_Root_CA.crt error adding mozilla/Starfield_Class_2_CA.crt error adding mozilla/StartCom_Certification_Authority.crt error adding mozilla/StartCom_Ltd..crt error adding mozilla/SwissSign_Gold_CA_-_G2.crt error adding mozilla/SwissSign_Platinum_CA_-_G2.crt error adding mozilla/SwissSign_Silver_CA_-_G2.crt error adding mozilla/Swisscom_Root_CA_1.crt error adding mozilla/TC_TrustCenter__Germany__Class_2_CA.crt error adding mozilla/TC_TrustCenter__Germany__Class_3_CA.crt error adding mozilla/TDC_Internet_Root_CA.crt error adding mozilla/TDC_OCES_Root_CA.crt error adding mozilla/TURKTRUST_Certificate_Services_Provider_Root_1.crt error adding mozilla/TURKTRUST_Certificate_Services_Provider_Root_2.crt error adding mozilla/Taiwan_GRCA.crt error adding mozilla/Thawte_Personal_Basic_CA.crt error adding mozilla/Thawte_Personal_Freemail_CA.crt error adding mozilla/Thawte_Personal_Premium_CA.crt error adding mozilla/Thawte_Premium_Server_CA.crt error adding mozilla/Thawte_Server_CA.crt error adding mozilla/Thawte_Time_Stamping_CA.crt error adding mozilla/UTN-USER_First-Network_Applications.crt error adding mozilla/UTN_DATACorp_SGC_Root_CA.crt error adding mozilla/UTN_USERFirst_Email_Root_CA.crt error adding mozilla/UTN_USERFirst_Hardware_Root_CA.crt error adding mozilla/ValiCert_Class_1_VA.crt error adding mozilla/ValiCert_Class_2_VA.crt error adding mozilla/VeriSign_Class_3_Public_Primary_Certification_Authority_-_G5.crt error adding mozilla/Verisign_Class_1_Public_Primary_Certification_Authority.crt error adding mozilla/Verisign_Class_1_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_1_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_Class_2_Public_Primary_Certification_Authority.crt error adding mozilla/Verisign_Class_2_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_2_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_Class_3_Public_Primary_Certification_Authority.crt error adding mozilla/Verisign_Class_3_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_3_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_Class_4_Public_Primary_Certification_Authority_-_G2.crt error adding mozilla/Verisign_Class_4_Public_Primary_Certification_Authority_-_G3.crt error adding mozilla/Verisign_RSA_Secure_Server_CA.crt error adding mozilla/Verisign_Time_Stamping_Authority_CA.crt error adding mozilla/Visa_International_Global_Root_2.crt error adding mozilla/Visa_eCommerce_Root.crt error adding mozilla/WellsSecure_Public_Root_Certificate_Authority.crt error adding mozilla/Wells_Fargo_Root_CA.crt error adding mozilla/XRamp_Global_CA_Root.crt error adding mozilla/beTRUSTed_Root_CA-Baltimore_Implementation.crt error adding mozilla/beTRUSTed_Root_CA.crt error adding mozilla/beTRUSTed_Root_CA_-_Entrust_Implementation.crt error adding mozilla/beTRUSTed_Root_CA_-_RSA_Implementation.crt error adding mozilla/thawte_Primary_Root_CA.crt error adding signet.pl/signet_ca1_pem.crt error adding signet.pl/signet_ca2_pem.crt error adding signet.pl/signet_ca3_pem.crt error adding signet.pl/signet_ocspklasa2_pem.crt error adding signet.pl/signet_ocspklasa3_pem.crt error adding signet.pl/signet_pca2_pem.crt error adding signet.pl/signet_pca3_pem.crt error adding signet.pl/signet_rootca_pem.crt error adding signet.pl/signet_tsa1_pem.crt error adding spi-inc.org/spi-ca-2003.crt error adding spi-inc.org/spi-cacert-2008.crt error adding telesec.de/deutsche-telekom-root-ca-2.crt failed (VM used: java-6-openjdk). dpkg: error processing ca-certificates-java (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: ca-certificates-java E: Sub-process /usr/bin/dpkg returned an error code (1) Update I also get a problem when running java -version: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. My VPS had 128MB of Memory, I changed to 256MB but got the same problem. Then I changed to 512MB and got the same problem. I found a related post on a forum: Sub-process /usr/bin/dpkg returned an error code (1) And I tried: sudo apt-get clean sudo apt-get --reinstall install openjdk-6-jre sudo dpkg --configure -a But I got the same problem, even when I'm using 512MB of Memory. Any suggestions?

  Read the article

• Psychonauts crashes right after entering load save door

  - by user67974

  Psychonauts crashes right after entering the 'Load Save' door. Here is the terminal output: Shader assembly time: 0.88 seconds Found OpenAL device: 'Simple Directmedia Layer' Found OpenAL device: 'ALSA Software' Found OpenAL device: 'OSS Software' Found OpenAL device: 'PulseAudio Software' Opened OpenAL Device: '(null)' ERROR: CAudioDrv::CAudioDrv->alGenSources reports AL_INVALID_VALUE error. PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonfx.isb' to 'WorkResource/Sounds/commonfx.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonvoice.isb' to 'WorkResource/Sounds/commonvoice.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonmusic.isb' to 'WorkResource/Sounds/commonmusic.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonmentalfx.isb' to 'WorkResource/Sounds/commonmentalfx.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonmenfxmem.isb' to 'WorkResource/Sounds/commonmenfxmem.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonfxmem.isb' to 'WorkResource/Sounds/commonfxmem.isb' GameApp::StartUp InitSoundFiles() completed in 0.15 seconds GameApp::StartUp Load some common textures completed in 0.00 seconds WARN: ENGINE: Lua garbage collection starting FreeUnusedBlocksInBuckets released 0 Kb GameApp::StartUp InitEntities() completed in 0.02 seconds PSYCHONAUTS UNIX FILENAME: corrected 'WorkResource/SavedGames/savegameprefs.ini' to 'WorkResource/SAVEDGAMES/savegameprefs.ini' PSYCHONAUTS UNIX FILENAME: corrected 'WorkResource/SavedGames/savegameprefs.ini' to 'WorkResource/SAVEDGAMES/savegameprefs.ini' GameApp::StartUp m_pSaveLoadInterface->Startup() completed in 0.00 seconds GameApp::StartUp m_UserInterface.Setup() completed in 0.00 seconds STUBBED: multisample at EDisplayOptionsWidget (/home/icculus/projects/psychonauts/Source/game/luatest/Game/UIPCDisplayOptions.cpp:97) STUBBED: VK_* at CheckVirtualKey (/home/icculus/projects/psychonauts/Source/CommonLibs/DirectX/SDLInput.cpp:1443) Game: Engine Running hook startup Game: Engine -> SetupGlobalObjects Game: Engine -> SetupLevelMenu Game: Engine -> InitMath GameApp::StartUp InitLua2() completed in 0.00 seconds GameApp::StartUp SetupLevelMenu() completed in 0.00 seconds STUBBED: do we even use this? at InitSocket (/home/icculus/projects/psychonauts/Source/game/luatest/Game/Gameplaylogger.cpp:210) GameApp::StartUp Post-Install total completed in 0.20 seconds Start Up completed in 1.57 seconds UnixMain: StartUp successful.. Working directory: /opt/psychonauts STUBBED: dispatch SDL events at PCMainHandleAnyWindowsMessages (/home/icculus/projects/psychonauts/Source/game/luatest/UnixMain.cpp:56) STUBBED: write me at GetJoystickInput (/home/icculus/projects/psychonauts/Source/CommonLibs/DirectX/SDLInput.cpp:428) STUBBED: write me at GetJoystickActionValue (/home/icculus/projects/psychonauts/Source/CommonLibs/DirectX/SDLInput.cpp:613) PSYCHONAUTS UNIX FILENAME: corrected 'workresource/cutScenes/prerendered/dflogo.bik' to 'WorkResource/cutscenes/prerendered/DFLogo.bik' Prerender subtitle file: workresource\cutScenes\prerendered\dflogo.dfs not found PSYCHONAUTS UNIX FILENAME: corrected 'workresource/cutScenes/prerendered/dflogo.bik' to 'WorkResource/cutscenes/prerendered/DFLogo.bik' STUBBED: fixed function pipeline? at setColorOp (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2097) STUBBED: fixed function pipeline? at setColorArg1 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2106) STUBBED: fixed function pipeline? at setColorArg2 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2115) STUBBED: fixed function pipeline? at setAlphaOp (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2124) STUBBED: fixed function pipeline? at setAlphaArg1 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2133) STUBBED: fixed function pipeline? at setAlphaArg2 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2142) STUBBED: fixed function pipeline? at setProjected (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2223) LOC WARN: Could not open Localization file 'Localization/English/_StringTable.lub' STUBBED: memory status at UpdateMemoryTracking (/home/icculus/projects/psychonauts/Source/game/luatest/Game/GameApp.cpp:4884) WARN: Couldn't resize array to 128; out-of-bounds elements are still in use: Vertex Pool, 188 Loading new level 'STMU' STUBBED: Need multithreaded GL at DisplayLoadingScreen (/home/icculus/projects/psychonauts/Source/game/luatest/Game/LoadingScreen.cpp:83) ========================= Memory post unload level ========================= ========================= LOC WARN: Could not open Localization file 'Localization/English/ST_StringTable.lub' DaveD: Info: Texture pack file contains 137 textures Doing a texture readback for locking! Game: Engine Saved[GLOBAL]: InstaHintFord_HostileRecord = [table] Game: Engine Saved[GLOBAL]: InstaHintFord_HostileOrder = [table] WARN: Redundant packfile read: anims\thought_bubble\bubblefirestarting.jan WARN: Redundant packfile read: anims\thought_bubble\bubbleintothemind.jan WARN: Redundant packfile read: anims\thought_bubble\bubbleinvisibility.jan WARN: Redundant packfile read: anims\thought_bubble\bubblepopperfill.jan WARN: Redundant packfile read: anims\thought_bubble\bubbletelekinesis.jan Initializing level script (if there is one) PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/stfx.isb' to 'WorkResource/Sounds/stfx.isb' Game: Engine Reloading goals: Game: Engine Saved[GLOBAL]: NextEncouragement = '/GLZF014TO/ 10' Game: Engine Saved[GLOBAL]: bUsedSalts = 0 Game: Engine Saved[GLOBAL]: bSTEntered = 1 Game: Engine Saved[GLOBAL]: memoriesST = 1 Game: Engine Saved[GLOBAL]: PsiBallColor = 'red' Game: Engine Saved[ST]: lastSubLevel = 'STMU' Game: Engine LOADING LEVEL st.STMU Game: Engine Saved[CA]: CALevelState = 1 Game: Engine Cutscene progression: CS Script moving from state nil to state nil, resultant state nil. Time: 0.124746672809124. * Stack Trace 1: (null) (line -1, file '(none)) () 2: SpawnScript (line -1, file 'C) (global) 3: onBeginLevel (line -1, file '(none)) (field) 4: (null) (line -1, file '(none)) () WARN: Cannot call GetDirectoryListing when running from the DVD Game: Engine Raz spawning at DartStart startpoint VM : LevelScript could not find script 'doorrimlight1' * Stack Trace 1: (null) (line -1, file '(none)) () WARN: (none(-1) SetEntityAlpha LevelScript: NULL script object passed Game: Engine Saved[GLOBAL]: bLoadedFromMainMenu = 1 Game: Engine Saved[GLOBAL]: NextEncouragement = '/GLZF014TO/ 10' Game: Engine Saved[GLOBAL]: NeedRankIncrement = 0 STUBBED: Need multithreaded GL at HideLoadingScreen (/home/icculus/projects/psychonauts/Source/game/luatest/Game/LoadingScreen.cpp:110) WARN: ENGINE: Lua garbage collection starting FreeUnusedBlocksInBuckets released 0 Kb Game: Engine Saved[GLOBAL]: SplineFigmentTVSizex = 4.51434326171875 Game: Engine Saved[GLOBAL]: SplineFigmentTVSizey = 46.38104248046875 Game: Engine Saved[GLOBAL]: SplineFigmentTVSizez = 47.08810424804688 WARN: (none(-1) SetNewAction LevelScript: no string passed ====================== Asset load progression ====================== Initial: 2.518 MB Vertex, 8.688 MB Texture Level : 3.719 MB Vertex, 22.535 MB Texture Scripts: 3.747 MB Vertex, 22.848 MB Texture ====================== ====================== Memory post level load ====================== ====================== WARN: ENGINE: Lua garbage collection starting FreeUnusedBlocksInBuckets released 0 Kb DaveD: Level loaded in 0.14 seconds Anim: anims\objects\tk_arrow_idle.jan: loaded (1 frames latency) Anim: anims\dartnew\helmet\darthelmetdn.jan: loaded (1 frames latency) Anim: anims\thought_bubble\shieldloop.jan: loaded (1 frames latency) Anim: anims\dartnew\standready.jan: loaded (1 frames latency) Anim: anims\dartnew\walkmove.jan: loaded (1 frames latency) Anim: anims\janitor\hint_end.jan: loaded (1 frames latency) Anim: anims\thought_bubble\ballstatic.jan: loaded (1 frames latency) Anim: anims\dartnew\actionfall.jan: loaded (1 frames latency) Anim: anims\dartnew\standstill.jan: loaded (1 frames latency) Anim: anims\dartnew\pack\packbounce_lf_rt.jan: loaded (1 frames latency) Anim: anims\dartnew\pack\packbounce_up_dn.jan: loaded (1 frames latency) Anim: anims\dartnew\helmet\darthelmetdefpose.jan: loaded (1 frames latency) 1: 1 (number) 1: 1 (number) STUBBED: This is probably wrong at GetDt (/home/icculus/projects/psychonauts/Source/CommonLibs/DFUtil/Profiler.cpp:181) STUBBED: set specular highlights at setSpecularEnable (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Renderer.cpp:2035) Anim: anims\dartnew\trnrtcycle.jan: loaded (1 frames latency) Anim: anims\dartnew\run.jan: loaded (1 frames latency) Anim: anims\dartnew\walk.jan: loaded (1 frames latency) Anim: anims\thought_bubble\bubbledoublejump.jan: loaded (1 frames latency) Anim: anims\dartnew\longjump.jan: loaded (1 frames latency) Anim: anims\menubrain\door1crack.jan: loaded (1 frames latency) Anim: anims\menubrain\door1crackedidle.jan: loaded (1 frames latency) Anim: anims\menubrain\door1closedidle.jan: loaded (1 frames latency) Anim: anims\dartnew\180.jan: loaded (1 frames latency) Anim: anims\menubrain\door3crack.jan: loaded (1 frames latency) Anim: anims\menubrain\door3crackedidle.jan: loaded (1 frames latency) Anim: anims\menubrain\door3closedidle.jan: loaded (1 frames latency) Anim: anims\dartnew\railslide45angle.jan: loaded (1 frames latency) Anim: anims\dartnew\railslideflat.jan: loaded (1 frames latency) Anim: anims\dartnew\trnlfcycle.jan: loaded (1 frames latency) WARN: (none(-1) SetNewAction LevelScript: no string passed Anim: anims\dartnew\mainmenu_jump.jan: loaded (1 frames latency) Anim: anims\menubrain\door1open.jan: loaded (1 frames latency) ERROR: Assert in /home/icculus/projects/psychonauts/Source/game/luatest/../../CommonLibs/Include/../DFGraphics/Color.h, line 96 v.x >= 0.0f && v.x <= 1.0f && v.y >= 0.0f && v.y <= 1.0f && v.z >= 0.0f && v.z <= 1.0f && v.w >= 0.0f && v.w <= 1.0f Encountered Error: Psychonauts has encountered an error /home/icculus/projects/psychonauts/Source/game/luatest/../../CommonLibs/Include/../DFGraphics/Color.h, line 96 v.x >= 0.0f && v.x <= 1.0f && v.y >= 0.0f && v.y <= 1.0f && v.z >= 0.0f && v.z <= 1.0f && v.w >= 0.0f && v.w <= 1.0f Please contact technical support at http://www.doublefine.com. I am currently using Bumblebee for hybrid graphics, if that helps in any way.

  Read the article

• Customize Team Build 2010 – Part 13: Get control over the Build Output

  In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application In the part 8, I have explained how you can add informational messages, warnings or errors to the build output. If you want to integrate with other lines of text to the build output, you need to do more. This post will show you how you can add extra steps, additional information and hyperlinks to the build output. UPDATE 13-12-2010: Thanks to Jason Pricket, it is now also possible to not show every activity in the build log. This is really useful when you are doing for-loops in your template. To see how you can do that, check out Jason's blog: http://blogs.msdn.com/b/jpricket/archive/2010/12/09/tfs-2010-making-your-build-log-less-noisy.aspx Add an hyperlink to the end of the build output Lets start with a simple example of how you can adjust the build output. In this case we are going to add at the end of the build output an hyperlink where a user can click on to for example start the deployment to the test environment. In part 4 you can find information how you can create a custom activity To add information to the build output, you need the BuildDetail. This value is a variable in your xaml and is thus easily transferable to you custom activity. Besides the BuildDetail the user has also to specify the text and the url that has to be added to the end of the build output. The following code segment shows you how you can achieve this.     [BuildActivity(HostEnvironmentOption.All)]    public sealed class AddHyperlinkToBuildOutput : CodeActivity    {        [RequiredArgument]        public InArgument<IBuildDetail> BuildDetail { get; set; }         [RequiredArgument]        public InArgument<string> DisplayText { get; set; }         [RequiredArgument]        public InArgument<string> Url { get; set; }         protected override void Execute(CodeActivityContext context)        {            // Obtain the runtime value of the input arguments                        IBuildDetail buildDetail = context.GetValue(this.BuildDetail);            string displayText = context.GetValue(this.DisplayText);            string url = context.GetValue(this.Url);             // Add the hyperlink            buildDetail.Information.AddExternalLink(displayText, new Uri(url));            buildDetail.Information.Save();        }    } If you add this activity to somewhere in your build process template (within the scope Run on Agent), you will get the following build output Add an line of text to the build output The next challenge is to add this kind of output not only to the end of the build output but at the step that is currently executing. To be able to do this, you need the current node in the build output. The following code shows you how you can achieve this. First you need to get the current activity tracking, which you can get with the following line of code             IActivityTracking currentTracking = context.GetExtension<IBuildLoggingExtension>().GetActivityTracking(context); Then you can create a new node and set its type to Activity Tracking Node (so copy it from the current node) and do nice things with the node.             IBuildInformationNode childNode = currentTracking.Node.Children.CreateNode();            childNode.Type = currentTracking.Node.Type;            childNode.Fields.Add("DisplayText", "This text is displayed."); You can also add a build step to display progress             IBuildStep buildStep = childNode.Children.AddBuildStep("Custom Build Step", "This is my custom build step");            buildStep.FinishTime = DateTime.Now.AddSeconds(10);            buildStep.Status = BuildStepStatus.Succeeded; Or you can add an hyperlink to the node             childNode.Children.AddExternalLink("My link", new Uri(http://www.ewaldhofman.nl)); When you combine this together you get the following result in the build output   You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

  Read the article

• Customize Team Build 2010 – Part 13: Get control over the Build Output

  In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application     In the part 8, I have explained how you can add informational messages, warnings or errors to the build output. If you want to integrate with other lines of text to the build output, you need to do more. This post will show you how you can add extra steps, additional information and hyperlinks to the build output. Add an hyperlink to the end of the build output Lets start with a simple example of how you can adjust the build output. In this case we are going to add at the end of the build output an hyperlink where a user can click on to for example start the deployment to the test environment. In part 4 you can find information how you can create a custom activity To add information to the build output, you need the BuildDetail. This value is a variable in your xaml and is thus easily transferable to you custom activity. Besides the BuildDetail the user has also to specify the text and the url that has to be added to the end of the build output. The following code segment shows you how you can achieve this.     [BuildActivity(HostEnvironmentOption.All)]    public sealed class AddHyperlinkToBuildOutput : CodeActivity    {        [RequiredArgument]        public InArgument<IBuildDetail> BuildDetail { get; set; }         [RequiredArgument]        public InArgument<string> DisplayText { get; set; }         [RequiredArgument]        public InArgument<string> Url { get; set; }         protected override void Execute(CodeActivityContext context)        {            // Obtain the runtime value of the input arguments                        IBuildDetail buildDetail = context.GetValue(this.BuildDetail);            string displayText = context.GetValue(this.DisplayText);            string url = context.GetValue(this.Url);             // Add the hyperlink            buildDetail.Information.AddExternalLink(displayText, new Uri(url));            buildDetail.Information.Save();        }    } If you add this activity to somewhere in your build process template (within the scope Run on Agent), you will get the following build output Add an line of text to the build output The next challenge is to add this kind of output not only to the end of the build output but at the step that is currently executing. To be able to do this, you need the current node in the build output. The following code shows you how you can achieve this. First you need to get the current activity tracking, which you can get with the following line of code             IActivityTracking currentTracking = context.GetExtension<IBuildLoggingExtension>().GetActivityTracking(context); Then you can create a new node and set its type to Activity Tracking Node (so copy it from the current node) and do nice things with the node.             IBuildInformationNode childNode = currentTracking.Node.Children.CreateNode();            childNode.Type = currentTracking.Node.Type;            childNode.Fields.Add("DisplayText", "This text is displayed."); You can also add a build step to display progress             IBuildStep buildStep = childNode.Children.AddBuildStep("Custom Build Step", "This is my custom build step");            buildStep.FinishTime = DateTime.Now.AddSeconds(10);            buildStep.Status = BuildStepStatus.Succeeded; Or you can add an hyperlink to the node             childNode.Children.AddExternalLink("My link", new Uri(http://www.ewaldhofman.nl)); When you combine this together you get the following result in the build output     You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

  Read the article

• Top tweets SOA Partner Community – October 2012

  - by JuergenKress

  Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity SOA Community Deploying Fusion Order Demo on 11.1.1.6 by Antony Reynolds http://wp.me/p10C8u-vA leonsmiers ?Cant wait to test it >> 't waiRT @OracleSOA: Case Management patterns, session coverage from #OOW #OracleBPM #ACM #BPM http://bit.ly/OdcZL6 Danilo Schmiedel Bye bye San Francisco. #oow was a great conference in a wonderful city! Thanks! @soacommunity pic.twitter.com/lcYSe9xC OPITZ CONSULTING ?The Journey towards #Oracle #BPM @OpenWorld 2012 - Slides by @t_winterberg & H. Normann: http://ow.ly/edkWE #oow demed Full house at the SOA Customer Advisory Board! #oow12 http://instagr.am/p/QX9B8eLMLS/ Danilo Schmiedel "@whitehorsesnl: Had some great talks with the BPM guys at the DEMOgrounds. It is one of the best things at #oow" -> I agree!! @soacommunity Mark Simpson ?Fusion Middleware Global Innovation Awards: nice to pick up a soa and bpm with our customer. #oow Mark Simpson ?RT @SOASimone: #oraclesoa #oow hands on lab fully booked pic.twitter.com/pwI94Ew7 <--quick, provision some more compute power on the cloud! Oracle SOA ?Join us for BPM and Analytics: Process Dashboards. BAM, and Intelligent OptimizationMoscone South - 308#OracleBPM #OOW Oracle SOA ?Real-time public safety demo! License plate recognition and processing in London via Oracle Event Processing. #oow pic.twitter.com/WufesDBq Marc ?Nice session on customer success stories on #SOA11g on with @SOASimone Pro and cons and architectural overview. #oow pic.twitter.com/bzuhsujm Lucas Jellema Full length Keynote on Middleware #oow : http://medianetwork.oracle.com/video/player/1873556035001 … #oow_amis OracleBlogs ?Why Fusion Middleware matters to Oracle Applications and Fusion Applications customers? http://ow.ly/2stVQ0 OracleBlogs ?Open World Session - BPM, SOA and ADF Combined:Patterns learned from Fusion Applications http://ow.ly/2suhzf Ronald Luttikhuizen ?VENNSTER BLOG | Presentations at OpenWorld 2012 | http://blog.vennster.nl/2012/10/presentations-at-openworld-2012.html … Andrejus Baranovskis @dschmied @soacommunity next OOW for sure, and may be SOA community event ! @soacommunity Danilo Schmiedel ?@andrejusb Thanks Andrejus - I really enjoyed having a session with you at #oow. When is next time :-) ? @soacommunity Lionel Dubreuil ?@soacommunity #oow12 Today-1:15pm-Marriott Marquis Salon 7 Jump-starting Integration with Oracle Foundation Pack http://bit.ly/QKKJzF Ronald Luttikhuizen ?Impression from our fault handling session in OSB and SOA Suite from the audience @soacommunity @gschmutz #oow pic.twitter.com/WSg1Z89E Marc Nice session on Oracle Virtual Assembly for #SOA11g, @soacommunity Works with #exalogic but not required SOA Community ?Send your #soacommunity #oow pictures and blog posts @soacommunity or http://www.facebook.com/soacommunity Enjoy OOW ;-) Jon petter hjulstad Oracle BPM- Big leap forward in 11.1.1.7 ! Whitehorses ?Common BPM Use Cases from Oracle #bpm #oow pic.twitter.com/ofOv04EF Whitehorses ?Oracle BPM 11.1.1.7 top new features. Interesting #oow #oowbenelux pic.twitter.com/HY9QN5un SOA Community Industrialized SOA - topic of Business Technology Magazine http://wp.me/p10C8u-vi orclateamsoa ?A-Team Blog #ateam: The curious case of SOA Human tasks' automatic completion http://ow.ly/1mq6YU Simone Geib Look for this sign #oow #oraclesoa pic.twitter.com/MJsPV4PO Lucas Jellema My summary of Larry Ellison's keynote at #oow on the AMIS Blog: http://technology.amis.nl/2012/10/01/oow-2012-larry-ellisons-keynote-announcements-exa-cloud-database/ … #oow_amis gschmutz ?Join my #oow session "Five Cool Use Cases for the Spring Component" to see the power of Spring and SOA Suite combined! Moscone 310 - 3:15 PM Ronald Luttikhuizen Thanks to @soacommunity for great SOA/BPM dinner event yesterday night! #oow pic.twitter.com/v7x3i0DC OracleBlogs ?OSB, Service Callouts and OQL http://ow.ly/2sq6B2 OracleBlogs ?Cloud and On-Premises Applications Integration using Oracle Integration Adapters http://ow.ly/2sqiDy OracleBlogs ?Adapters, SOA Suite and More @Openworld 2012 http://ow.ly/2srdTg Eric Elzinga ?OSB, Service Callouts and OQL - Part 3, http://see.sc/JodzEx #oracleservicebus Donatas Valys interesting articles about soa industrialization to read #soa #industrialization http://it-republik.de/business-technology/bt-magazin-ausgaben/Industrialized-SOA-000516.html … gschmutz ?“@techsymp: 2012 Symposium Presentation Download Page Now Available! 75% of presentations published. http://www.servicetechsymposium.com ” find mine there.. Oracle BPM Customer Experience and BPM – From Efficiency to Engagement #bpm #oraclebpm #processmanagement #socialbpm http://pub.vitrue.com/Tahi SOA Community ?@soacommunity SOA Community Newsletter September 2012 http://wp.me/p10C8u-wa SOA Community again again again.... it is Oracle Open World 2012 http://wp.me/p10C8u-wk OracleBlogs ?SOA Proactive support http://ow.ly/2smrSJ demed ?@gschmutz on NoSQL at @techsymp http://lockerz.com/s/247601661 demed ?Just finished "#BigData and its impact on #SOA" talk @techsymp. Really enjoyed getting out of beaten path. #london #oep http://lockerz.com/s/247636974 OTNArchBeat ?Need help selling SOA to business stakeholders? Give them this free eBook. #soasuite http://pub.vitrue.com/hsQY SOA Community top Tweets SOA Partner Community &ndash; September 2012 http://wp.me/p10C8u-vc SOA Community Move Data into the grid for scalable, predictable response times http://wp.me/p10C8u-vv ServiceTechSymposium ?The September issue of the Service Technology Magazine is now published with six new items! Read them at http://www.servicetechmag.com Marc ?Reviewed @Packt_OracleFMW new book on SOA11g administration! Very good ! http://tinyurl.com/8pzd5ww SOA Community ?BPM Solution Catalogue&ndash;promote your process templates http://wp.me/p10C8u-vt OTNArchBeat ?BPM ADF Task forms: Checking whether the current user is in a BPM Swimlane | @ChrisKarlChan http://pub.vitrue.com/aPMG OTNArchBeat ?Cloud, automation drive new growth in SOA governance market | @JoeMcKendrick http://pub.vitrue.com/hNPv Simon Haslam ?Looking for "oak style"(!) advanced content but you're a middleware specialist? See #ukoug2012 #middlewaresunday http://2012.ukoug.org/default.asp?p=9355 … Simon Haslam ?The #ukoug2012 agenda is "go, go, go!" (as Murray would say!) http://2012.ukoug.org/agendagrid Germán Gazzoni SOA Spezial II verfügbar – Industralized SOA: Die überarbeitete und ergänzte Neuauflage des SOA Spezial Sonderhe... http://bit.ly/PAWwN9 Oracle SOA ?Flip thru new interactive "Oracle SOA Suite eBook-In the Customers Words" #middleware #soa #oraclesoa http://pub.vitrue.com/NzFZ SOA Community Follow SOA Community on Facebook http://www.facebook.com/soacommunity #soacommunity #opn SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Community twitter,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

  Read the article

< Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >