Search Results

Search found 28816 results on 1153 pages for 'ubuntu netbook remix'.

Page 588/1153 | < Previous Page | 584 585 586 587 588 589 590 591 592 593 594 595 | Next Page >

Ping Access to a Nested VM !! Plz Help

- by Shivaramakrishnan

I have a problem in communication between the host and the nested VM.This is my layout. I have installed KVM on host machine having a single nic interface (public ip) running Ubuntu.On top of this,I have VM running Ubuntu.I have installed KVM in this VM too.I then have a VM inside this running a web server. I am able to ping the host from this web server VM and ssh into it.But from host to VM ,ping is being unsuccessful. The VM (named L1hyp) on host was created using libvirt-manager and has IP of 192.168.122.8. The vswitch interface created at host is in default config (NAT-ed). Its IP is 192.168.122.1. Now this VM is also having a vswitch interface which is in default config (NAT-ed).Its IP is 192.168.100.1. The Web server VM is created on top of this L1hyp VM, is having an IP of 192.168.100.186. The Webserver VM uses 192.168.100.1 as its default gw. The L1hyp uses 192.168.122.1 as its default gw. From Host: ping 192.168.122.8 - SUCCEEDS ping 192.168.122.1 - SUCCEEDS ping 192.168.100.1 - SUCCEEDS ping 192.168.100.186 - FAILS Comes up with Destination Host Unreachable From 192.168.122.1. But there is route to 192.168.100.0/24 subnet from host.Ping to 192.168.100.1 succeeds. From Webserver VM: ping 192.168.100.1 - SUCCEEDS ping 192.168.122.1 - SUCCEEDS SSH from web server VM to host succeeds. Can anyone help me out what needs to be modified to have two way communication between the host and Webserver VM at the earliest? I am pondering over this problem for over a week now.

Read the article
Fix for poor hd playback for 11.04 upwards

- by mark kirby

Hi guys ive seen loads of posts on this site about poor 720/1080p playback in recent ubuntu versions I had this problem and fixed it so I thought id share it with everyone.... 1 install mplayer 2 install smplayer frontend {in software center} 3 open smplayer 4 go to "OPTIONS" then "PREFRENCES" then "GENRAL" 5 if you have a nvidia card choose "OUTPUT DRIVER" and select "VDPAU" {for ATI or AMD choose xv (0 - ATI Radeon AVIVO video) I dont know if this will work as my card is nvidia but it should) 6 go to performance on the left hand side and set both local and streaming cache to 99999 (this may also fix dvd playback if you set that cache aswell} 7 check the box for "ALLOW HARD FRAME DROP" and set "LOOP FILTER" to skip only on HD 8 Set the "THREDS FOR DECODING OPTION TO THE NUMBER OF CORES YOUR CPU HAS IF YOU HAVE MORE THAN ONE CPU ADD UP ALL THE CORES FOR BEST PERFORMANCE" 9 Enjoy you HD movies again on ubuntu...... I have a pretty avrage machine heres my spec.... 2x Pentium 4 ht 3 ghz Stock dell power and motherboard GFORCE 310 HDMI 24 inch full HD tv as a monitor so any one with dule core cpu should have no problems getting this to work. hope this helps someone out.

Read the article
Gigabyte u24f Touchpad (elantech) not detected

- by user314973

A new Ubuntu user here. I just installed Ubuntu 14.04 on my gigabyte U24F laptop. At first the touch-pad (I believe it's elantech) was working fine but one day I turned it off using fn+f10 key from the keyboard. The next day I could no longer turn it back on and it has since been undetected by the system. xinput returns Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Logitech USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Video Bus id=9 [slave keyboard (3)] ? Power Button id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] so there's no touch-pad detected. I'm using a USB mouse at the moment. Attempting to run synclient gives "Couldn't find synaptics properties. No synaptics driver loaded?" Things I've tried so far to no avail Reinstalling xserver-xorg-input-synaptics. Checking dconf.editor settings, touchpad is enabled. Booting into a live usb session, touchpad no longer even works in this case. (Does this mean a fresh install wouldn't even solve the problem?) Any help is greatly appreciated!

Read the article
Gparted funkiness - won't recognize 1TB, full-hdd /home partition, but recognizes ext4 and /home label

- by Kurtosis

I have a 1TB SATA hard disk from my old desktop, and the entire thing is an ext4 /home partition (/, /boot, and swap were all on another hdd). It is now in a USB2 enclosure and I want to use it to back up my current laptop /home. To do this I need to shrink the /home partition on the 1TB backup drive. It only uses about 500GB so that shouldn't be a problem, I'll start the laptop with an Ubuntu live USB, plug in the 1TB drive, and use Gparted to shrink the 1TB /home partition to ~500GB. Then I can create a second partition in the newly freed space, and cp -ax my laptop's /home over to it. Unfortuntely, Ubuntu Live USB can detect and mount the external hdd, and Gparted can see it's there, but Gparted can't read it and hence can't resize it. Disk Utility reports the drive is fine, no errors, so I'm not sure what's the problem. See linked pics, worth a thousand words. Anyone know what the problem is here? Any pointers in the right direction much appreciated.

Read the article
Screen resolution stuck at 1024x768

- by Dananjaya

I just updated from Ubuntu 10.10 to 11.04 and have an issue regarding the screen resolution. I have Intel integrated gfx chip and my monitor supports resolutions larger than 1024x768. (in 10.10 I've been using 1280x1024) But as soon as I upgraded, I'm stuck with 1024x768 resolution and seems I can't change it. running xrandr In terminal yields the following results, Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1280x800 58.1 + 1024x768 60.0* 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 1366x768 59.9 + 1360x768 60.0 1024x768 75.1 72.0 70.1 60.0* 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 1280x1024_60.00 (0xce) 109.0MHz h: width 1280 start 1368 end 1496 total 1712 skew 0 clock 63.7KHz v: height 1024 start 1027 end 1034 total 1063 clock 59.9Hz What maybe the problem? Is it a bug? What kind of steps I should take in order to get a higher resolution? (changing xorg.conf maybe?) Any insight is highly appreciated. Thanks in advance. UPDATE Screenshot after running xrandr --addmode VGA1 1360x768 As you can see, side bar is not completely visible and Ubuntu logo at the task bar is missing. Also when you open an application, the Task bar of the application (where it should go to the top panel) is missing as well..

Read the article
Encrypt SSD or not?

- by JamesBradbury

My desktop machine is running Ubuntu 12.04 (and will probably stay with it until the next LTS). I've got a new 120GB SSD on the way as my existing 420GB spinning disk. If it makes any difference I'll be dual-booting with Windows 7 across both disks too. I've read some helpful answers here about /home setup and enabling TRIM, which I intend to follow. So most of my /home will be on the SSD, with only photos, videos and music on the spinning disk. The question is, when I reinstall Ubuntu from CD or USB, whether I should encrypt the SSD? Specifically: I'm reading that drive wear isn't much of an issue with modern SSDs as they last decades even if you spam them. Is this true? How big a performance reduction will encrypting cause (I have an i7 Sandybridge, so I guess it can cope)? Is it more important from a security point of view to encrypt an SSD? I think I read somewhere that it may be hard to reliably wipe data. By all means answer even if you only know about one of those things.

Read the article
How to get a Toshiba L505 to boot USB or CD

- by ShroudedCloud

OK, have a Toshiba L505 (not sure of the extended model number) that got a virus on Windows and will no longer will boot into that, so I'm trying to revive it with Ubuntu. Problem is, when I tell it to boot into a USB image of 12.04 32- or 64-bit, 13.04 64-bit, or elementary Luna 32-bit, it gives me some screen with a copyright from 2000 for Intel, invariably spits out a "media not recognized" type of error and then says PXE-ROM exiting. Well, that's annoying. So I went in with a CD (12.04 x86_64 having tried 32-bit in the past as well). Boot menu, select, starts running. Seeing the loading screen for Ubuntu, going well... until it's not. Again, invariably, it fails. The CD drive will cease spinning at around the same time each time and then the laptop will stop doing everything altogether (at least, everything spins down and it goes quiet). As far as I can tell, it's not to do with what function is being loaded from the CD at the time (because that bit is variable). I'd love to be able to boot from USB (since it will be all but required going forward), but getting the CD to work would be wondrous too. Anyone have any ideas of where I can go from here to try to fix this? My friends and I have turned up nothing.

Read the article
How do I copy a package from Debian to my PPA?

- by Bernhard Reiter

I'd like to add the latest gourmet package from Debian sid to our team's PPA so Ubuntu users who would like to run an up-to-date version of Gourmet can add that PPA to their software sources. (Dependency-wise, that shouldn't be much of an issue as pretty much all our current dependencies are already available in all currently supported Ubuntu versions.) I've downloaded the *.dsc file and debian and orig tarballs, and even figured out I could use this for the package's source.changes file. I also downloaded the Debian maintainer's public key so dput can validate the package. I then tried to upload the package to our PPA using dput ppa:~gourmet/ppa gourmet_0.17.3-1_source.changes (I also tried without the tilda.) This seemed to succeed, but I didn't get a confirmation email, and no packages are now displayed at our PPA, which leads me to believe that the package was rejected because the Debian maintainer's key is obviously not among our team members' keys. So what's the easiest way to "copy" a package from Debian (sid) to a Launchpad PPA? Do I really need to rebuild the entire package locally before I can upload it?

Read the article
Lots of static/crackling noises after ALSA HDA DKMS installation

- by MartinB

I am using a Samsung Chronos 7 laptop with the following sound setup: $ head -n 1 /proc/asound/card0/codec* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC269VC ==> /proc/asound/card0/codec#3 <== Codec: Intel CougarPoint HDMI With the stock ALSA that comes with Ubuntu 12.04, I do not get any sound out of the headphones when I plug them into the headphone jack. After plugging the headphones in, I have to manually use Alsamixer to increase the volume, so that the headphones become usable. I have been told that this issue is due to my sound chip not being supported in the ALSA version that ships with Precise. A similar question at AskUbuntu and the Ubuntu Community Documentation point me to the ALSA DKMS installation. After installing the dkms module of yesterday's ALSA snapshot and rebooting, the headphone issue is indeed solved. I can now plug my headphones into the jack and instantly have sound on them. However, now I have tons of static noises and crackling when playing sound in VLC player or Skype (Firefox HTML5 playback seems to be fine, unless a Skype sound interferes with it). Is there a fix for this? I tried adding the Alsa PPA and installing the latest ALSA package proper, but that didn't have any effect, only the Alsa DKMS package seems to solve the headphone issue.

Read the article
Ugly Boot Screen after upgrading to 12.10

- by Sir Linuxalot

Is there a way to change the ugly boot screen in 12.10? It seems to have rolled back to that 8-bit blocky looking thing with tiny orange dots underneath. It then breaks into process code under that, and it looks ghastly. I've read some tutorials on getting Plymouth to do some neat things, but they were for older versions of Ubuntu. I'm running a GeForce GTX 460 if that matters. Any help would be appreciated. Update: I've noticed/found a couple of things. The upgrade on my laptop didn't do this. It still uses the "normal" Ubuntu boot logo (using Plymouth, I assume). So, something is off with my desktop. And, I found and installed Super Boot Manager to see if that would help. With that, I enabled Plymouth and added a new theme, but the machine still boots with the block-ugly logo. Finally, I messed around with Grub on boot and added "nomodeset" after "quiet splash" and added it while deleting "quiet splash." None of these solutions worked. I'll keep hunting...

Read the article
Issues with Cinnamon?

- by Corrodie

I just recently switched my system over to Ubuntu 12.10, and decided on Cinnamon as my environment-- it all worked fine, at first. But I was poorly educated and started using Compiz and Emerald along with it--Setting both as replacements in startup processes. I now know, that's a big, big mistake. Now when loading Cinnamon, I am greeted to my background image, and only that. My only options seem to be to open a terminal. I was advised to attempt muffin --replace and mutter --replace Neither to any avail, the terminal closes, and I cannot load another one unless I completely reload. I went back to Unity, purged and autoremoved Cinnamon, emerald, and compizconfig, and attempted to reinstall Cinnamon, thinking that would solve the problem--no, it came back just as broken as before. So, I reinstalled ubuntu, then cinnamon---still broken. I'm assuming I must find a way to remove the replace commands-- but as I have no menu, I'm not positive I can do that. Is there any way I can access the startup processes via terminal? I'd think though, if I completely removed Cinnamon, all configurations would be gone too, so, it's just not making much sense. Is there some kind of reset I could possibly do? I've been browsing forums and questions here, all leading to things I'd already done, so, it can't hurt to ask for myself. I apologize if you would rather I have posted this over at mint. Next time, I will definitely check compatibility instead of assuming something just has to work. Any help is greatly appreciated, thanks! ****EDIT***** It seems although it didn't allow me to do it before, I was now allowed to access the settings and startup processes for Cinnamon via Unity, and, after quickly removing aforementioned processes- I'm up and running again.

Read the article
nautilus crash when merging/overwriting files

- by sBlatt

On my Ubuntu 10.10, whenever I want to copy some files/folders over some other files/folders, or when I try to empty the trash, nautilus crashes! Example: I have a folder with some files. Now I want to overwrite this folder with a folder with the same name, same files, but some additional files, the merge window comes up, I choose merge and nautilus crashes (does not respond, when I press the close button I can force close it). Some times it even does the copying/emptying (trash), but it always crashes! This happens when copying to the same partition/ntfs partition/netshares, but not when I make a new folder and copy the files/folders into that (without overwriting anything). On a netshare, it's even possible to merge these files afterwards with another computer! dmesg/syslog/messages does not show any entry related to that problem. Does anyone have a solution for this very annoying problem? EDIT: dpkg -l nautilus* (see output in pastebin) EDIT2: I found out, nautilus already crashes before clicking replace/merge (as soon as the question appeares. In the video it's not entirely clear, that i click the cross before the force-close dialog appeares. Video of problem nautilus-debug-log.txt EDIT3: Filed bugreport: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/678233

Read the article
How to install custom c library?

- by arijit

I just wanted to add a c library to Ubuntu which was created by Harvard University for cs50 course. They provided instructions for how to install the library which is listed below. Debian, Ubuntu First become root, as with: sudo su - Then install the CS50 Library as follows: apt-get install gcc wget http://mirror.cs50.net/library/c/cs50-library-c-3.1.zip unzip cs50-library-c-3.1.zip rm -f cs50-library-c-3.1.zip cd cs50-library-c-3.1 gcc -c -ggdb -std=c99 cs50.c -o cs50.o ar rcs libcs50.a cs50.o chmod 0644 cs50.h libcs50.a mkdir -p /usr/local/include chmod 0755 /usr/local/include mv -f cs50.h /usr/local/include mkdir -p /usr/local/lib chmod 0755 /usr/local/lib mv -f libcs50.a /usr/local/lib cd .. rm -rf cs50-library-c-3.1 I did exactly as directed. But the compiler reported “Undefined reference to a function”--the function was Get String. So, I searched for a solution and found one. It said to use the -l switch. Now when I compile I use something like: gcc –o hello.c hello –lcs50 (I don’t remember the exact command.) However, I cannot use the make command, which is easier to use. I understand that there is some problem with linking the library. What is a good solution to this problem?

Read the article
CUDA & MSI GT60 with Optimus enabled GTX670M?

- by user1076693

I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

Read the article
Unwanted Chinese language got set in system settings

- by Registered User

I was discussing on the Ubuntu users list how to type in in Hindi (Indic language) in Libre Office and about a package installation problem. I have made some changes in system settings, following suggestions by some users. However, this morning when I did a reboot I am unable to see English as my default language. My system is showing some Chinese characters which I do not understand. All I wanted was to use Libre Office for a particular document in Hindi. What happened is that even Gmail is opening in Chinese. The system settings folder and others are also opening in Chinese. I am unable to use the system now. I have uploaded the snapshots here: please have a look. Upon a reboot, I was asked to rename all folders. Gmail opening in Chinese This is how menu on my system looks: half English and half Chinese Notice that in the third snapshot the calendar and menu are appearing in Chinese. I want the original US English menus and folder names back. I just wanted to type a document with Lohit Hindi font in Libre Office. I use Ubuntu 11.10. I do not use Unity, only Gnome desktop. I installed gnome-session-fallback a long time back and have been using that ever since. How do I get back to all English submenus and English folder names? I have a US English Keyboard and I use only US English. This thing which is now somehow set is unwanted.

Read the article
Software Center empty "No usefulness from server" "no username in config file"

- by Theron G. Burrough

I upgraded to 12.04 LTS and ran Software Center while a few things were running, and crashed. (2 GB RAM on a Netbook.) On reboot, Ubuntu One interface would not find any programs, neither installed (to run) nor available for download. So I launched Software Center, which opens, but does nothing. I click "Close" button and get a "Force Quit?" box. So I quit. Did research, learned to run Software Center from Terminal: 2012-04-29 23:14:36,978 - softwarecenter.backend.reviews - WARNING - Could not get usefulness from server, no username in config file Then tried the below without success: Reinstallation of software center: sudo apt-get install --reinstall software-center Didn't work. Found this in a post: remove the config file for software-center then log out and back in sudo rm -rf ~/.config/software-center Didn't work. Reinstalled Software Center with Synaptic Package Manager. Still no dice! And I am a Linux newbie, so I don't know where the Dickens that config file is. Help appreciated.

Read the article
Configure Unity Lenses and what they search

- by Sindre

I'm using Ubuntu 12.10. I've read about a lense (ppa:pydave/unity-lenses) that you can replace with the original files and folders lense, so you can search all your files. Instead of the current which only search used/recently used files and programs. I couldn't get this to work with 12.10, got a bunch of errors when I tried adding the ppa. I would like to set up a lens that can search all my files and folders (from all of my 3 hdd's), one that search through my videos (ability to specify which folders) and the same for music. So basically I would like to set up three specific lenses that each get a set of specified folders that they search through. If this is not possible, is there atleast a way to configure the current Files and Folders lense to ignore certain folders? I don't like when my dash shows files that I don't want to be shown. I should add that I'm completely new to Ubuntu and I apologize beforehand if this information could easily be found. But I wasn't able to find something like this. Edit: I found out how I can use the Privacy application to ignore what I want, so that's sorted now. Sorry for not researching it more. But my question regarding the lenses still stand. All help is greatly appreciated.

Read the article
Unable to mount NTFS Partition after resizing

- by sam

I was having only 15 GB space allocated to LINUX. I wanted to have more space available to linux. So I just re sized one of my ntfs partition using GParted. But after resizing I am not able to open the partition neither in Ubuntu nor in windows. OS: Dual Boot Win7/Ubuntu 10.10 The error message i get is the following: Error mounting: mount exited with exit code 12: Failed to read last sector (395458824): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

Read the article
SD Card only mounted after a reboot

- by hattenn

I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

Read the article
virtual install from ISO not getting virtual kernel

- by Pete

I have a KVM host (12.04.5) that I have been installing guests on in variety of ways. I just noticed recently one of my guests was running a generic kernel when I'm fairly certain I specified minimum virtual machine during install from a 12.04.2 server iso. From what I understand it should be running a stripped down kernel "optimized" for VMs. I set up another server to test, this time using a 14.04.1, and sure enough I ended up with uname -r returning 3.13.0-32-generic. It seems that if I use an .iso to install, I end up with generic regardless. However building with the vmbuilder ... --flavour virtual --suite precise ... (I don't have trusty available yet) script gives me an ubuntu 12.04.5 LTS system running kernel 3.2.0-67-virtual. The server FAQ mentions I should be getting the virtual kernel. What are practical advantages of using linux-image-virtual kernel? gives me the impression that it doesn't really matter functionally (in my case I only have a couple VMs running). I first thought was maybe I was somehow not applying the correct options because the installer F4 menu doesn't really give great feedback if the mode has been selected or not. Looking in the log /var/log/installers/syslog I see Command line: file=/cdrom/preceed/ubuntu-server-minimalvm.seed ... I know that I can install the virtual kernel package down the road, but why am I not, or should I be getting the virtual flavor of kernel from an ISO install when doing an minimum VM install?

Read the article
How can I make multiple displays work on my Asus UX32VD?

- by oKtosiTe

Original title: Why do I have two trash icons in the Unity Launcher? Whether I run Ubuntu as a live-USB or install it, I always have two trash bins on the Unity Launcher. Both work, and both open the same location. This seems a bit redundant; what could be done about it? Update: Turning auto-hide on made it obvious that I have multiple Launchers showing. With auto-hide off, they simply overlap, making it look like there's a double trash icon, but with auto-hide enabled, I can display one Launcher (and therefore one trash icon) at a time. Still, two are running simultaneously. Second update: This problem appears to be caused by the way Ubuntu handles multiple displays on my Asus UX32VD Ultrabook. Somehow, the laptop display cannot be used while my external display is connected. It is shown in the Displays list, but remains black no matter how I configure it. The external display runs at 1920x1200, the laptop monitor should run at 1920x1080. It therefore becomes obvious that the Launcher that's supposed to run on the laptop display, is actually displayed on the external monitor. Using nomodeset as a kernel parameter as indicated here makes the laptop display inaccessible altogether, detecting the external monitor as the laptop display and making resolutions other than 1920x1200 inaccessible. That is not an option.

Read the article
Blurry printed raster images with Brother MFC-8840D

- by Adam Monsen

(NOTE: crossposted here: ubuntuforums.org/showthread.php?t=1621795) I've got a Brother MFC-8840D. Works great with Ubuntu server! Setting up a CUPS print server was pretty straightforward, and I also finally got network scanning working reliably with saned. Printing documents and Web pages works well: fonts are crisp/clear, etc. One issue has got me completely vexed: printing raster (ie: JPG) images. They are blurry. For example, I can scan a page of black and white text at 150 or 300 dpi. The grayscale image looks perfect on my monitor. But the printed version is much blurrier than the original, regardless of the "print resolution" dpi I choose. As a counterexample, if I use the "copy" function of the MFC-8840D, the copy looks excellent, and this function is much, much faster than if I scan then print a scan of same. I've googled around a bunch and tried different tricks (printing a PDF with the image from evince, printing with Gimp, EOG and other applications) but I just can't print anything that looks as good as a copy made with the MFC-8840D. Any ideas? I'm using Ubuntu 10.04.1 LTS server. I'm using the PPD file from solutions.brother.com. Thanks, -Adam

Read the article
Routing tables don't show ppp0 after 12.04 kernel upgrade to 3.5.0: Haier CE682 modem configuration

- by ubunsteve

I'm trying to get my Haier CE682 EVDO modem, model number 201e:1022 to work in ubuntu 12.04 kernel 3.5.0-030500-generic #201207211835 . I had it working in a previous 12.04 kernel, using compat-wireless and these instructions http://zulkhamsyahmh.blogspot.com/2012/05/install-smartfren-haier-ce682-on-ubuntu.html, and to get it working had to edit the routing tables so that there was a ppp0 showing up, as suggested at http://www.linuxquestions.org/questions/slackware-14/wvdial-is-connecting-but-im-unable-to-do-anything-714861/ Network manager doesn't work with this modem, so I use either wvdial or gpppon to connect to it, both which work (after I run the command sudo modprobe usbserial vendor=0x201e product=0x1022 ) This is the output of when I connect with gpppon to the modem: Using interface ppp0 Connect: ppp0 <-- /dev/ttyUSB0 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP ConfReq id=0x2 ] sent [LCP ConfAck id=0x2 ] sent [LCP EchoReq id=0x0 magic=0x819c86db] rcvd [CHAP Challenge id=0x1 <1ac8f12799e953967a3cc222c9254690, name = ""] sent [CHAP Response id=0x1 <6f12a903dc40915ca2761c17b87f8fbd, name = "smart"] rcvd [LCP EchoRep id=0x0 magic=0x0] rcvd [CHAP Success id=0x1 ""] CHAP authentication succeeded CHAP authentication succeeded sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [IPCP ConfReq id=0x1 ] sent [IPCP ConfAck id=0x1 ] rcvd [CCP ConfReq id=0x1] sent [CCP ConfAck id=0x1] rcvd [CCP ConfRej id=0x1 ] sent [CCP ConfReq id=0x2] rcvd [IPCP ConfRej id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [CCP ConfAck id=0x2] rcvd [IPCP ConfNak id=0x2 ] sent [IPCP ConfReq id=0x3 ] rcvd [IPCP ConfAck id=0x3 ] not replacing existing default route via 192.168.3.1 local IP address 10.191.248.154 remote IP address 10.17.95.25 primary DNS address 10.17.3.244 secondary DNS address 10.17.3.245 as you can see there is a problem with "not replacing existing default route via 192.168.3.1" This it the out put of route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.3.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.3.0 * 255.255.255.0 U 2 0 0 wlan0 I had tried these commands, which had previously worked in the earlier kernel: route del default route add default ppp0 but that broke my wireless internet connection. I then added the default routing as shown above with sudo route add default gw 192.168.3.1 wlan0 So it seems I need to add or change the routing to show a ppp0 connection, but I don't know how to do that.

Read the article
Wireless will not connect on an Asus U56? [closed]

- by ernie

I have an ASUS U56. I could connect to internet without delay or problems in Ubuntu 11.04. Now, running Ubuntu 11.10, I have not been able to connect. I can see the network and the computer tries to connect, but never makes the connection. I have been trying to fix this problem since the release date of 11.10. I had to install the older kernel 2.6 to get the wifi to work. Any other solutions? ernest@ernest-U56E:~$ ifconfig eth0 Link encap:Ethernet HWaddr 14:da:e9:25:6c:d0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:53 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 40:25:c2:3f:46:d4 inet addr:192.168.xx.xxx Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::4225:c2ff:fe3f:46d4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:44962 errors:0 dropped:0 overruns:0 frame:0 TX packets:32287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:35614976 (35.6 MB) TX bytes:5400816 (5.4 MB) ernest@ernest-U56E:~$

Read the article
A terminal emulator for ex-Windows users

- by Dan

There are several things I would like to be better in Ubuntu Terminal Emulator. coloring, like in the source code Copy and paste keyboard shortcuts that I used all the time in Windows: Ctrl-C and Ctrl-V (Most of people here in Ubuntu use Ctrl+C and Ctrl+V keyboard shortcuts to copy and paste everywhere except the terminal! I think it's annoying for newcomers, and I don't worry about historical reasons) A feature to save all the output to log file UPDATE: Can the terminal be a powerful feature-full user-friendly tool like a modern IDE? The Linux user can spend 30% of time in the terminal. Programmers no longer code in a notepad. Can I see the history pane? Suggestions? Directory pane? Commands list? Search for words in an output? Contextual behavior? "Search in Google" for a mouse right-click. Tips and tricks learning? Time is money! Please, people, give me a link to the 21st - century terminal.

Read the article

< Previous Page | 584 585 586 587 588 589 590 591 592 593 594 595 | Next Page >