Search Results

Search found 56208 results on 2249 pages for 'ini set'.

Page 589/2249 | < Previous Page | 585 586 587 588 589 590 591 592 593 594 595 596  | Next Page >

• Dirt compression from vehicle tires

  - by Mungoid

  So I kinda have this working but its not correct because it just averages, so I wanted to know if anyone here has any ideas. I'm trying to simulate loose dirt compression under the tires of a vehicle to reduce the potential bumpiness of 'chunky' terrain. Currently how I do this is that I have a bounding box shape around my tires, set a little lower so they intersect with the terrain. Each frame, I (currently) average all of the heights of each point in the terrain that are within the box bounds of that tire, and then set them all to that average. Clearly this won't work in most cases because, for example, if i'm on a hill, the terrain will deform way too much. One way I thought was to have a max and min amount the points could raise and lower but that still doesn't seem to work properly and sometimes looks more like steps than smooth dirt. I wanna say that there is probably a bit more to this that what i'm currently doing but I am not sure where to look. Could anyone here shed some light on this subject? Would I benefit any by maybe looking up some smoothing algorith or something similar?

  Read the article

• What is causing this behavior with the movement of Pong Ball in 2D? [closed]

  - by thegermanpole

  //edit after running it through the debugger it turned out i had the display function set to x,x...TIL how to use a debugger I've been trying to teach myself C++ SDL with the lazyfoo tutorial and seem to have run into a roadblock. The code below is the movement function of my Dot class, which controls the ball. The ball seems to ignore yvel and moves with xvel to the bottom right. The code should be pretty readable, the rest of the relevant facts are: All variables are names Constants are in caps dotrad is the radius of my dot yvel and xvel are set to 5 in the constructor The dot is created at x and y equal to 100 When I comment out the x movement block it doesn't move, but if i comment out the y movement block, it keeps on going down to the right. void Dot::move() { if(((y+yvel+dotrad) <= SCREEN_HEIGHT) && (0 <= (y-dotrad+yvel))) { y+=yvel; } else { yvel = -1*yvel; } if(((x+xvel+dotrad) <= SCREEN_WIDTH) && (0 <= (x-dotrad+xvel))) { x +=xvel; } else { xvel = -1*xvel; } }

  Read the article

• How do I turn off PCI devices?

  - by ethana2

  With the purchase of an Intel SSD and 85WHr Li-ion battery and the linking of wifi and bluetooth to my laptop's wireless switch, extensive Intel PowerTop usage, switching from compiz to metacity, stopping of the desktop-couch daemon, removal of Ubuntu One and several other services from my startup, disabling of everything possible in my BIOS, and physical removal of my optical drive, I've gotten my battery life up fairly high, but I think there's still more to be done. Specifically, when I'm in class taking notes, I want to temporarily but completely power down: Ethernet Firewire USB ports SD card reader Optical drive Webcam Sound card PCMCIA slot ..without turning them off in my BIOS like they are now, if possible, because then I have to restart my computer to use any of them. As it stands, I still haven't managed to power down: Firewire USB connection to webcam sound card How do I tell Linux to disable and power down these devices? Is it true that any PCI slot can be physically powered down? My current idle power consumption is 7.9 watts plus the screen. (10.0W at min. brightness) Also, how do I set the screen timeout to ten seconds? gconf editor isn't honoring it when I set it to that. Will switching from nVidia to Nouveau save any significant amount of power?

  Read the article

• No sound Ubuntu 12.04 through HDMI

  - by MikeMan

  Specs: Asus G73JH i7/720; ATI Mobility 5870 I have read through a lot of threads on getting HDMI sound to work and non of them have fixed my issue. Granted I am very new to Linux and know only the GUI aspect of what it does from finding similarities that Windows 7 has. I would like to become a Linux Power User and I figured this would be a good step to get started. I was able to successfully install my graphics driver and it shows in use. I connect the HDMI to my HD TV and I get no sound. I don't care about auto switch for sound, that would be great but not necessary. I just want my sound to work through the HDMI. What I have tried: Changed GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" pact set-card-profile 0 output:hdmi-surround Failure: no such entity Sound Settings: Right-click Sound indicator ? Sound Settings ? Output Tab, and set Digital Output (S/PDIF) Built in Audio Speakers Built in Audio I only get 2 settings. If I right-click the area below those 2 in the "play sound through" box, I get no "show hidden devices". I am also doing all this with the HDMI connected to eliminate any possibility for error.

  Read the article

• Tuning WebServer Response -

  - by Vedran Wex Maricevic

  I have this sam e question on StackOverflow and I was advised to ask it here hoping for more information. Here is the question: I am in rather unfavorable situation. I have aspdotneststore front e-commerce application and search addon called VibeTrib. I dont have source code for both of those. Store that runs on StoreFront and VibeTrib has close to 250k products. Also we have lots of filters. I spoke to ViTrib reps, and they want extra money so they could optimize Queries that they use. Money they require is nto a big deal, but the problem is I dont trust them anymore. What we got is much different then wha is being advertised. To cut the long story short. I am runing the store on Amazon AWS now, and regardless of what DB (MsSQL 2012) server I set (I tried 32GB RAM monsters instances) it is slow. Ajax search uses Full Text search and it displays search keywords relatively fast, but once the search is performed ( to display all results) it is still slow.!!! There is something that I could to do accelerate the speed on my own end? I do have full control over EC2 Instance (Web server Server 2012 and IIS 8). Can I set IIS to step in for the search and cache some of it? I was hoping to cache at least some most common words. My best bet is IIS 8 :) Is there any help in my case? Thanks

  Read the article

• String on a model

  - by alecnash

  I am trying to put a sting on a Model and I want it to be dynamic. Did some research and came up with drawing the text on the texture and then set it on the model. I use something like this: public static Texture2D SpriteFontTextToTexture(SpriteFont font, string text, Color backgroundColor, Color textColor) { Size = font.MeasureString(text); RenderTarget2D renderTarget = new RenderTarget2D(GraphicsDevice, (int)Size.X, (int)Size.Y); GraphicsDevice.SetRenderTarget(renderTarget); GraphicsDevice.Clear(Color.Transparent); Spritbatch.Begin(); //have to redo the ColorTexture Spritbatch.Draw(ColorTexture.Create(GraphicsDevice, 1024, 1024, backgroundColor), Vector2.Zero, Color.White); Spritbatch.DrawString(font, text, Vector2.Zero, textColor); Spritbatch.End(); GraphicsDevice.SetRenderTarget(null); return renderTarget; } When I was working with primitives and not models everything worked fine because I set the texture exactly where I wanted but with the model (RoundedRect 3d button) it looks like that: Is there a way to have the text centered only on one side?

  Read the article

• Application that provides unique keys to multiple threads

  - by poly

  Thanks all for your help before. So, this is what I came up with so far, the requirements are, application has two or more threads and each thread requires a unique session/transaction ID. is the below considered thread safe? thread 1 will register itself with get_id by sending it's pid thread 2 will do the same then thread 1 & 2 will call the function to get a unique ID function get_id(bool choice/*register thread or get id*/, pid_t pid) { static int pid[15][1]={0};//not sure if this work, anyway considor any it's been set to 0 by any other way than this static int total_threads = 0; static int i = 0; int x=0,y=0; if (choice) // thread registeration part { for(x=0;x<15;x++) { if (pid[x][0]==0); { pid[x][0] = (int) pid; pid[x][1] = (x & pidx[x][1]) << 24;//initiate counter for this PID by shifting x to the 25th bit, it could be any other bit, it's just to set a range. //so the range will be between 0x0000000 and 0x0ffffff, the second one will be 0x1000000 and 0x1ffffff, break; } total_threads++; } } //search if pid exist or not, if yes return transaction id for(x=0;x<15;x++) { if (pid[x][0]==pid); { pid[x][1]++;//put some test here to reset the number to 0 if it reaches 0x0ffffff return pid[x][1]; break; } } }

  Read the article

• Identifying elements from data feeds generated by affiliate sites

  - by SPI

  I am working with data feeds from affiliate sites. The basic idea is to provide an interface where the user can paste a link to an XML datafeed (these are huge btw, around 60 mb) that would then be streamed, parsed into small chunks, and mined for the required data which would then be stored in the database. The problem is that different affiliate sites have different Schemas for their XML's. It is a little hard mapping the elements in an XML to your database attributes when you don't actually know which element contains what. My Solution: Use XPath to traverse through the first set of parent and it's descendent's, fetch the elements as well as the data and and ask the user to map this data to the attributes in the database by selecting from a set of radio buttons that represent the attributes from the database. This will be done just once for each new Feed, once the system know's what's what it will automatically upload the data from the XML to the database. Does this sound viable? Is there a better solution? I realize this leaves an uncomfortable opening for human error.. Thanks.

  Read the article

• How do I get dynamic subdomains on domain aliases in Plesk? [closed]

  - by mitchdesign

  I am running a site that is available via many domains. So all domains depend on the same code, but depending on the requested domain, the correct information is shown to the user. In Plesk, I have one domain set up and it has domain aliases for all the others. This works ok. Now, I'd like to be able to use subdomains on those aliased domains. Like the domains, the subdomains will be used as input for the system to display the correct information. So, they are not a fixed set. What I have done: - In DNS I have added *.example.com CNAME example.com to the main domain. This is automatically copied by Plesk to all the aliases. So DNS-wise, I think it's ok. - I have added a vhost.conf file to the main domain, containing ServerAlias *.maindomain.tld. This works for the main domain. But still, not for the aliased domains. And there is no place to put vhost.conf files for the aliased domains.. How do I tell the server to respond to those domain's subdomains as well?

  Read the article

• Mobile web app, styling in percentages; I can't get height to work [migrated]

  - by Mick79

  I am building a mobile app for a band and obviously want it to display well in all the plethora of handsets out there today. I built it at first for my own device and it looks and works great, so now I am reworking it in percentages so that it works in all devices. I have a slider (jquerytools) going on and if i set width to 100% then it is perfectly wide in my iphone and my ipad... success, however I am not having any luck with height. It seems to only accept a height in px. If i set a height in percent it just doesn't display. any ideas? #header{ width:100%; height:198px; position:relative; z-index: 20; box-shadow: 0 0 10px white; } .scrollable { /* required settings */ position:relative; overflow:hidden; width: 100%; height:100%; box-shadow: 0 0 20px purple; z-index: 20; } .scrollable .items { /* this cannot be too large */ width:500%; height:100%; position:absolute; clear:both; box-shadow: 0 0 30px green; } .items div { float:left; width:20%; height:100%; } /* single scrollable item */ .scrollable img { float:left; width:100%; height:100%; /* height:198px; */ } /* active item */ .scrollable .active { border:2px solid #000; position:relative; cursor:default; } `

  Read the article

• noexec option enabled in fstab is not getting applicable for limited user. Is it a bug?

  - by user170918

  noexec option enabled in fstab is not getting applicable for limited user. Is it a bug? cat /etc/fstab # / was on /dev/sda2 during installation UUID=fd7e2645-3cc4-4c6c-8b1b-016711c2fd07 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=f3e58f86-8999-4678-a5ec-0a4b621c6e37 /boot ext4 defaults 0 2 # /home was on /dev/sda9 during installation UUID=bcbc1c4d-46a9-4b2a-bb0a-6fe1bdeaed22 /home ext4 defaults,nodev,nosuid 0 2 # /tmp was on /dev/sda5 during installation UUID=8538eecc-bd16-40fe-ad66-7d7b9287839e /tmp ext4 defaults,noexec,nosuid,nodev 0 2 # /var was on /dev/sda6 during installation UUID=292696cf-fc15-40ab-9cd8-cee9bff7e165 /var ext4 defaults,nosuid,nodev 0 2 # /var/log was on /dev/sda7 during installation UUID=fab1f85b-ae09-4ce0-b169-c01205eb8f9c /var/log ext4 defaults,noexec,nosuid,nodev 0 2 # /var/log/audit was on /dev/sda8 during installation UUID=602f5003-4ac0-49e9-99d3-b29378ce9430 /var/log/audit ext4 defaults,noexec,nosuid,nodev 0 2 # swap was on /dev/sda3 during installation UUID=a538d35b-b2e9-47f2-b72d-5dbbcf0afca0 none swap sw 0 0 /dev/sdb1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 /dev/sdc1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 /dev/sdd1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 sudo users are not able to paste executable files in /bin into the file system which have the noexec option set. But limited users are able to paste the same files into the file system which have noexec option set. Why is it so?

  Read the article

• Directory Synchronization

  - by Robert May

  We’re using federated security with Office 365 and everything was running swimmingly and then I started getting the following error when trying to synchronize security information: “An unknown error occurred with the Microsoft Online Services Sign-in Assistant. Contact Technical Support.” Great.  Very descriptive.  In the event viewer, you get a bit more detail: GetAuthState() failed with -2147186688 state. HResult:0. Contact Technical Support.  (0x80048831) If you do some searching, you’ll find that there are a couple of MSDN articles about this error.  In KB2502710 you’re told to reinstall sign in assistant.  This one requires a reboot.  In KB2517393 you’re told to make sure that your proxy settings are working correctly.  I’m not using a proxy and everything was set up right. Rather frustrating and I couldn’t figure out what was going on.  What finally keyed me in was the error number being presented.  Rather than 80048800, which is listed in the second article, I was getting 80048831.  I did a quick search and found something that was seemingly unrelated here.  Could it really be so simple as the password having expired for my synchronization user? Turns out, it was that simple.  Once the password was reset and reentered, everything worked great again. Since this isn’t a user that humans use, I also don’t want the password to expire.  You can find the instructions for that (use Set-MsolUser –UserPrincipalName <user ID> –PasswordNeverExpires $true) here. Technorati Tags: Office 365

  Read the article

• New functionality in TFS Build Manager &ndash; Managing Triggers and Build Resources

  - by Jakob Ehn

  Yesterday we pushed out a new release (August 2012) of the Community TFS Build Extension, including a new version of the Community TFS Build Manager (1.0.4.6) The two big new features in the Build Manager in this release are: Set Triggers It is now possible to select one or more build definitions and update the triggers for them in one simple operation: You’ll note that we have started collapsing the context menu a bit, the list of commands are getting long! When selecting the Trigger command, you’ll see a dialog where the options should be self-explanatory: The only thing missing here is the Scheduled trigger option, you’ll have to do that using Team Explorer for now.   Manage Build Resources The other feature is that it is now possible to view the build controllers and agents in your current collection and also perform some actions against them. The new functionality is available by select the Build Resources item in the drop down menu: Selecting this, you’ll see a (sort of) hierarchical view of the build controllers and their agents: In this view you can quickly see all the resources and their status. You can also view the build directory of each build agent and the tags that are associated with them. On the action menu, you can enable and disable both agents and controllers (several at a time), and you can also select to remove them. By selecting Manage, you’ll be presented with the standard Manage Controller dialog from Visual Studio where you can set the rest of the properties. Hopefully we’ll be able to implement most of the existing functionality so that we can remove that menu option Our plan is to add more functionality to this view, such as adding new agents/controllers, restarting build service hosts, maybe view diagnostic information such as disk space and error logs.   Hope you’ll find the new functionality useful. Remember to log any bugs and feature requests on the CodePlex site. Happy building!

  Read the article

• My sound is not working, so I'm going to reinstall FYI [closed]

  - by fer

  I've had trouble getting the sound to work in Ubuntu 12.04 I'm running an Acer Aspire 5739g laptop. This is using a clean install. This wasn't a problem when ubuntu first installed. Rather, it was when I ran the updates that it stopped working. I already tried the suggestions on the ubuntu sites and other similar queries, and they haven't fixed it. Something in the updates is making my sound not work. Edit: It turns out that this might be a bug (the sound issue, first paragraph). After reinstall, it happened again (it's not caused by updates at all, or any software, because I fixed it now w/o reinstall). It seems like I replicated it as follows: I changed auto-hide in the behavior tab of Appearance settings by turning it on, and setting the sensitivity to below the recommended setting. Then instead of restarting, I just logged out and back in. The sound stopped working again. I set the behavior settings to default, restarted, and now it's back to normal. Not sure if it's due to only logging out (and not restarting) or b/c I set my sensitivity to a low setting. Not sure if this helps anyone, but thought I'd mention it.

  Read the article

• Why doesn't wireless work on Wubi 12.04 with a Broadcom BCM4312 card?

  - by Kristin

  I have recently set up ubuntu 12.04 on my laptop using the Wubi installer. I am having a very difficult time setting up a wireless internet connection. I am currently set up with an ethernet connection which I have used to download all new updates and to activate the Broadcom STA wireless driver. I have tried several things in the terminal based on other people's posts: ~$ rfkill list 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes ~$ rfkill unblock all It doesn't change anything. I also tried rebooting and connecting to the internet on my Windows Vista OS, and it worked, so I know that the connection should not be hard blocked. I have also tried installing b43 firmware (lp/phy version) that is supposed to work with my chip (BCM4312). It seems to have no effect. Then I tried: ~$ iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. This is my first time trying to work with ubuntu, so I would appreciate any help. Thanks. Also sorry this is poorly formatted. I'm having troubles with that too.

  Read the article

• Feedback on meeting of the MSCC - 20.07.2013

  Impression of our meetup on 20.07.2013 Low quantity but high quality! Meetup summary: Quick introduction to ?MSCC? and interesting topics in general, especially for freshman from/at university. It also seems that the open concept of OUYA (Android-based gaming console) got some attention and hopefully new fans. More info is available online: http://www.ouya.tv/ Design contest The design contest is still going on... There's currently only one submission. Come on, you web & graphic designers in Mauritius - SHOW YOUR WORKAny draft will be published over here: MSCC Design Contest - https://www.facebook.com/media/set/?set=a.200036533488751.1073741829.181737551985316&type=3 Goodies give-away And the first 2 one-month subscriptions for Pluralsight have been well received by attendees, too. Unfortunately, we didn't have any free WiFi at Talking Drums - so, we might have to consider another location for the next meetup. Change of schedule As we spoke about the advantages of gathering during the weekend, we worked out a schedule that could be applied to future meetups of the MSCC. I'm going to address this tomorrow during our regular meetings on Wednesday to see about the response of other members, too.

  Read the article

• 1 ASPX Page, Multiple Master Pages

  - by csmith18119

  So recently I had an ASPX page that could be visited by two different user types.  User type A would use Master Page 1 and user type B would use Master Page 2.  So I put together a proof of concept to see if it was possible to change the MasterPage in code.  I found a great article on the Microsoft ASP.net website. Specifying the Master Page Programmatically (C#) by Scott Mitchell So I created a MasterPage call Alternate.Master to act as a generic place holder.  I also created a Master1.Master and a Master2.Master.  The ASPX page, Default.aspx will use this MasterPage.  It will also use the Page_PreInit event to programmatically set the MasterPage.  1: protected void Page_PreInit(object sender, EventArgs e) { 2: var useMasterPage = Request.QueryString["use"]; 3: if (useMasterPage == "1") 4: MasterPageFile = "~/Master1.Master"; 5: else if (useMasterPage == "2") 6: MasterPageFile = "~/Master2.Master"; 7: }   In my Default.aspx page I have the following links in the markup: 1: <p> 2: <asp:HyperLink runat="server" ID="cmdMaster1" NavigateUrl="~/Default.aspx?use=1" Text="Use Master Page 1" /> 3: </p> 4: <p> 5: <asp:HyperLink runat="server" ID="cmdMaster2" NavigateUrl="~/Default.aspx?use=2" Text="Use Master Page 2" /> 6: </p> So the basic idea is when a user clicks the HyperLink to use Master Page 1, the default.aspx.cs code behind will set the property MasterPageFile to use Master1.Master.  The same goes with the link to use Master Page 2.  It worked like a charm!  To see the actual code, feel free to download a copy here: Project Name: Skyhook.MultipleMasterPagesWeb http://skyhookprojectviewer.codeplex.com

  Read the article

• Movement on the X an Z axis are combined?

  - by Magicaxis

  This is probably a stupid question, but I'm trying to simply move a 3D object up, down, left, and right (Not forward or backward). The Y axis works fine, but when I increment the object's X position, the object moves BOTH right and backwards! when I decrement X, left and forwards! setPosition(getPosition().X + 2/*times deltatime*/, getPosition().Y, getPosition().Z); I was astonished that XNA doesnt have its own setPosition function, so I made a parent class for all objects with a setPosition and Draw function. Setposition simply edits a variable "mPosition" and passes it to the common draw function: // Copy any parent transforms. Matrix[] transforms = new Matrix[block.Bones.Count]; block.CopyAbsoluteBoneTransformsTo(transforms); // Draw the model. A model can have multiple meshes, so loop. foreach (ModelMesh mesh in block.Meshes) { // This is where the mesh orientation is set, as well // as our camera and projection. foreach (BasicEffect effect in mesh.Effects) { effect.EnableDefaultLighting(); effect.World = transforms[mesh.ParentBone.Index] * Matrix.CreateRotationY(MathHelper.ToRadians(mOrientation.Y)) * Matrix.CreateTranslation(mPosition); effect.View = game1.getView(); effect.Projection = game1.getProjection(); } // Draw the mesh, using the effects set above. mesh.Draw(); } I tried to work it out by attempting to increment and decrement the Z axis, but nothing happens?! So using the X axis changes the objects x and z axis', but changing the Z does nothing. Great. So how do I seperate the X and Z axis movement?

  Read the article

• Used mountmanager now Ubuntu hangs on boot

  - by fpghost

  I was using MountManager in Ubuntu 12.04 to set user permissions in mounting hard drives. I set each partititon to be mountable by everyone instead of admin only. Then I clicked Apply in the file menu and it gave me the message successfully updated. Upon restarting Ubuntu, just hangs on the splash screen and does not boot any further. Windows still boots fine. How can I fix these? please help thanks From LiveUSB: my fstab looks like: overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda5 swap swap defaults 0 0 /dev/sda7 swap swap defaults 0 0 Is this corrupted? Other things that may be helpful: blkid returns /dev/loop0: TYPE="squashfs" /dev/sda1: LABEL="System Reserved" UUID="0AF26C31F26C22E5" TYPE="ntfs" /dev/sda2: UUID="5E1C88E31C88B813" TYPE="ntfs" /dev/sda3: UUID="94B2BB7DB2BB6282" TYPE="ntfs" /dev/sda5: UUID="41b66b9a-2b48-45cf-b59d-cd50e41ec971" TYPE="swap" /dev/sda6: UUID="c73ca79e-4fa4-4bde-967e-670593736f6a" TYPE="ext4" /dev/sda7: UUID="c05d659f-103c-4444-9dc4-3121b9e081d6" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="1DE8-0A49" TYPE="vfat" and cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=1950000k,nr_inodes=206759,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=783056k,mode=755 0 0 /dev/sdb1 /cdrom vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,erro rs=remount-ro 0 0 /dev/loop0 /rofs squashfs ro,noatime 0 0 tmpfs /cow tmpfs rw,noatime,mode=755 0 0 /cow / overlayfs rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 gvfs-fuse-daemon /home/ubuntu/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=999,group_id=999 0 0

  Read the article

• How to use lists in equivalence partitioning?

  - by KhDonen

  I have read that equivalence partitioning can be used typically for intervals or lists, e.g. I assume it can be used for every set of inputs. Anyway if the requirement says that allowed colors are (RED,BLUE,BLACK, GREEN), I cannot treat them like a list, right? I mean, testing one of them would not be enough because developers most likely used some switch-case and thus it is not real "set" where one could represent also the others. So how it is meant with lists? Also what is not that clear to me, I do not think it is always possible to do the initial partioning and then design the test cases. What about checking two lines intersection: Y=MX+C. (two inputs) 1) The lines are paraller. M1=M1 but C1 must be different from C2. 2) Lines are intersecting. M1 must be different from M2. 3) Coincident. The are the same. How can I use partitioning here? THis is actually taken from a book and it says that these sets are eq.classes.

  Read the article

• Coping with build order requirements in automated builds

  - by Derecho

  I have three Scala packages being built as separate sbt projects in separate repos with a dependency graph like this: M---->D ^ ^ | | +--+--+ ^ | S S is a service. M is a set of message classes shared between S and another service. D is a DAL used by S and the other service, and some of its model appears in the shared messages. If I make a breaking change to all three, and push them up to my Git repo, a build of S will be kicked off in Jenkins. The build will only be successful if, when S is pushed, M and D have already been pushed. Otherwise, Jenkins will find it doesn't have the right dependent package versions available. Even pushing them simultaneously wouldn't be enough -- the dependencies would have to be built and published before the dependent job was even started. Making the jobs dependent in Jenkins isn't enough, because that would just cause the previous version to be built, resulting in an artifact that doesn't have the needed version. Is there a way to set things up so that I don't have to remember to push things in the right order? The only way I can see it working is if there was a way that a build could go into a pending state if its dependencies weren't available yet. I feel like there's a simple solution I'm missing. Surely people deal with this a lot?

  Read the article

• batch: comparing filenames and renaming [migrated]

  - by user2978770

  i'm new to both this platform and batch programming and i'm slowly but steadily driving crazy :-( I'm studying in Germany and just started on a bigger project that mainly consists of analyzing data and finding algorithms in order to maintain a certain function of a system. In order to get started i got a bunch of recorded data that, unfortunately, is not consistent when i comes to naming. Normally all files (all in one folder) should start with SPY.SPYNODE.SIDE and then go on with the specific names for each values or variables. However, the data logger messed it up a couple of times and gives weird names like SP0E1A~1.csv (all files are .csv-files). An that's when i figured in stead of renaming a couple of thousand files manually i could "easily" use a simple batch file to do that job for name. And that's exactly when I started to go crazy :-) So far i came up with the following: FOR /R %%i in (%CD%) DO ( set file1=%%i if not %file1%=="SPY.SPYNODE.SIDE" DO ( set /p "filename" < %file1% rename %file1% %filename% ) ) So what i want it to do is this (in pseudo) look through the whole folder and every file save the filename in variable file1 if file1 partially equals SPY.SPYNODE.SIDE open the file and save the first line (which contains the correct name of the file) in variable filename rename the file with the correct filename But so far it doesn't really work and i don't know why. Could anybody give me a hint or some advice how i should proceed? I really appreciate any kind of help!

  Read the article

• How do you blend multiple colors in HSV (polar) color-space?

  - by Toxikman

  In RGB color space, you can do a weighted multiple-color blend by just doing: Start with R = G = B = 0. Then we perform a blend at index i using a set of colors C, and a set of normalized weights w like so: R += w[i] * C[i].r G += w[i] * C[i].g B += w[i] * C[i].b But I'd like to interpolate the colors in the HSV color-space instead, so that saturation and brightness are uniform across the interpolation. I know I can blend saturation and brightness in the same way as above, but the HUE component is an angle around a continuous circle, since HSV is essentially a polar coordinate system. Blending only two HSV colors makes sense to me, you just find the shortest arc around the circle and interpolate between the two hues. But when you attempt to blend more than 2 colors, it becomes a bit of a puzzle. You have to handle anomalous cases, like 4 equally-weighted colors with a hue at 0, 90, 180, and 270 degrees. They basically cancel each other out, so any hue will do. Any ideas would be greatly appreciated.

  Read the article

• Client and Server game update speed

  - by user20686

  I am working on a simple two player networked asteroids game using XNA and the Lidgren networking library. For this set up I have a Lidgren server maintaining what I want to be the true state of the game, and the XNA game is the Lidgren client. The client sends key inputs to the server, and the server process the key inputs against game logic, sending back updates. (This seemed like a better idea then sending local positions to the server.) The client also processes the key inputs on its own, so as to not have any visible lag, and then interpolates between the local position and remote position. Based on what I have been reading this is the correct way to smooth out a networked game. The only thing I don’t get is what value to use as the time deltas. Currently every message the server sends it also sends a delta-time update with it, which is time between the last update. The client then saves this delta time to use for its local position updates, so they can be using roughly the same time deltas to calculate position updates. I know the XNA game update gets called 60 times a second, so I set my server to update the game state at the same speed. This will probably only work as long as the game is working on a fixed time step and will probably cause problems if I want to change that in the future. The server sends updates to clients on another thread, which runs at 10 updates per second to cut down on bandwidth. I do not see noticeable lag in movement and over time if no user input is received the local and remote positions converge on each other as they should. I am also not currently calculating for any latency as I am trying to go one step at a time. So my question is should the XNA client be using its current game time to update the local game state and not being using time deltas sent by the server? If I should be using the clients time delta between updates how do I keep it in-line with how fast the server is updating its game state?

  Read the article

• What kinds of languages would be most useful for this kind of webapp?

  - by Caedar

  I've had some experience with programming in the past (2-3 years of C++ self-teaching), so I'm no stranger to the programming process, but there are so many languages out there that I'm lost when thinking about this project idea that's been floating around my head: I would like to create a webapp that would be used for helping somebody figure out what kinds of productivity tools would suit them. The first part of the app would basically be a survey with a variety of questions that would help weed out tools that wouldn't be useful for them. (Slider bar between minimalist and maximizer, slider bar between all free apps and no cost limit, checkboxes on what platforms are required, etc.) While the person is filling out the survey, they will see a web of applications, webapps, and other tools forming on the screen with links showing the relationships the programs have with eachother (syncing supported, good combinations of apps, etc.), along with a list of applications below sorted by general use (notetaking, document organization, storage, etc.) I would imagine that each program entered into the database that will be accessed would have a certain set of characteristics, ie. price, user friendliness, platforms supported, general uses, etc. and the survey would be designed to correlate to those elements and remove programs that don't match the criteria set. The difficult part of this entire process would be getting the web of applications to arrange itself and render properly. Now that I've finished mind-dumping, onto my question: What kinds/combinations of programming languages would you imagine being useful for this kind of project, and why? I learn best by setting up a project for myself like this one and tinkering with the languages, so I don't mind if the end product is out of reach from my current skill level. I'd just like some guidance so I don't fumble in the dark for too long.

  Read the article

< Previous Page | 585 586 587 588 589 590 591 592 593 594 595 596  | Next Page >