Search Results

Search found 2166 results on 87 pages for 'aj hdd'.

Page 59/87 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• Is the motherboard the cause of these errors?

  - by ianfuture

  Motherboard is : ASUS A7N8X-E Deluxe, Rev1.01, On start up get: "cmos checksum error - defaults loaded" error BIOS is reset everytime and can't boot to Windows off HDD. POST report is ok once I tell it there is no Floppy drive attached and not to seek it. The boot sequence starts then just as get to load windows safe mode options whole PC shuts down. BIOS is reset to defaults again. I've checked the battery and jumpers. Tried a known working battery. Changed Graphics card, changed memory, changed HD to one without an OS. Disconnected DVD drive. PSU is known to be ok. IN BIOS CPU is recognised correctly and memory is also recognised ok. So is it likely to be a bad motherboard or corrupted BIOS or something else? Thanks :)

  Read the article

• New power supply and now HDDs are not recognized.

  - by Michael

  So I upgraded to a new X4 ULTRA power supply that was recommended to me by a local TigerDirect store. After installing it along with a new liquid cooling system, I booted it up and it automatically fried my CD Drive. After that I noticed that the OS wouldn't start and figured out that none of the 4 HDDs in my computer were being recognized by the BIOS. I feel them spool at a steady pace and have tried new cables and connections but to no avail. I triple checked all of the connections and cables and have no idea what is wrong. This isn't the first time I changed a PS or CPU cooling system but I am at a dead end. Any ideas, aside from buying a USB HDD reader and seeing if they are all fried? Also, this is a stock Gateway mobo with the mobo USB connections already dead. Could the new PS have fried the SATA connections??

  Read the article

• Separating user resources - Windows Server 2008 (Terminal Server)

  - by Christopher Wilson

  At the moment I am running a Windows Terminal Server 2008 for around 10 clients that use the server to run programs and access data. Is there anyway to separate the resources of each user so that they do not impact each other in terms of resources. User 1: Opens program User 2: Notices slow down I have looked into using Windows System Resource Manager but do not know if it provides what I need and if there are any other 3rd party tools that also provide this functionality. Any answer is appreciated. Server Specs: HP ProLiant ML110 G7 Processor: Intel® Xeon® E3-1220 (4 core, 3.1 GHz, 8MB, 80W, 1333/t) RAM: 12GB DDR3 ECC 1TB HDD

  Read the article

• Mutli-processor workstation as a workstation/server

  - by posdef

  I work in a research institute and a number of programs we use are computationally intensive (I actually wrote one of them). Right now we have one computer that is dedicated for one of these programs (with local accounts only, as in users physically sitting in front of that pc) and the other programs are run on individual workstations assigned to people. I have been looking around to common brands such as Dell and HP, for a some sort of a small/medium scale server, which can be used as a workhorse by sending tasks remotely. It appears as if there is nothing in between workstations with one 6-core processor and a bunch of extras (like fancy graphics etc) and rack mount servers with ridiculous amount of RAM and HDD expansion capabilities but still relatively little number of processors/cores. I wonder if what I am looking for is such a small niche product? Are there other solutions that I might not be aware of? Does anyone know of a multi proc- multi-core workstation/server that is still within the reasonable

  Read the article

• How low-power can a home server get?

  - by Halik

  I've got quite simple question actually. How green, low-power and efficient x86 home server can I build using consumer parts with rather constrained budget. After looking through some Google hits I've found out that system based on dual-core atom, some modest mITX board (gigabit lan, integrated audio and gfx etc), one RAM module and one 'green' WD HDD, powered by picoITX PSU uses about 30W at idle up to 40 at load. Can you get lower (or how much lower) then that? Maybe some VIA nano chips, or single core atom? My home server would take care of some back-upping mixed with little ftp/http traffic.

  Read the article

• Resize primary partition

  - by telebog

  I have a hdd with the folowing partition table 12Gb Primary Partition (ntfs) 140Gb Extended Partition (ntfs) I want to install windows 7 and I need more space for the Primary Partition. The problem is that when I resize partitons I obtain: 12Gb Primary Partition (ntfs) 110Gb Extended Partition (ntfs) 30Gb Free Space So I can't allocate the free space to primary partition because the free space is at the end of the disk. Is there a solution to extend the primary partition as: 42Gb Primary Partition (ntfs) 110Gb Extended Partition (ntfs) without repartitioning the entire disk? I used partition magic, gparted-live-0.4.6-4 and others with no success. With the Disk Management from Vista I manage to extend primary partition, but made my partitions dinamic.

  Read the article

• Create bootable partition from image

  - by Carson Darling

  I have a Macbook Pro with a dead CD drive. I don't have easy access to a replacement drive. I'm trying to install Ubuntu, and I can't get the MBP to recognize a USB stick as a bootable media (I believe MBP's have issues with booting from USB in some cases). Is it possible to take a disk image and write it to a partition on the HDD so that I can then boot from that partition and then install the OS onto a third partition? Partition layout: 150GB OS X 50GB Ubuntu destination 5GB Ubuntu install image

  Read the article

• ubuntu server slowly filling up

  - by Crash893

  We had our samba server (ubuntu 8.04 ltr) share fill up the other day but when I went to look at it I cant see any of the shares have to much on them we have 5 group shares and then each users has an individual share one users has 22gigs of stuff a few others have 10-20mb of stuff and everyone else is empty so maybe like 26gigs total I deleted a few files yesterday and freed up about 250mb of space today when i checked it it was completely full again and i deleted some older files and freed up about 170mb of stuff but i can watch it slowly creep down in free space. I keep running a df -h Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 241690180 229340500 169200 100% / varrun 257632 260 257372 1% /var/run varlock 257632 0 257632 0% /var/lock udev 257632 72 257560 1% /dev devshm 257632 52 257580 1% /dev/shm lrm 257632 40000 217632 16% /lib/modules/2.6.24-28-generic /volatile what can I do to try to hunt down whats taking up so much of my hdd? (im fairly new to unix in general so i apologize if this is not well explained)

  Read the article

• ubuntu server slowly filling up

  - by Crash893

  We had our samba server (ubuntu 8.04 ltr) share fill up the other day but when I went to look at it I cant see any of the shares have to much on them we have 5 group shares and then each users has an individual share one users has 22gigs of stuff a few others have 10-20mb of stuff and everyone else is empty so maybe like 26gigs total I deleted a few files yesterday and freed up about 250mb of space today when i checked it it was completely full again and i deleted some older files and freed up about 170mb of stuff but i can watch it slowly creep down in free space. I keep running a df -h Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 241690180 229340500 169200 100% / varrun 257632 260 257372 1% /var/run varlock 257632 0 257632 0% /var/lock udev 257632 72 257560 1% /dev devshm 257632 52 257580 1% /dev/shm lrm 257632 40000 217632 16% /lib/modules/2.6.24-28-generic /volatile what can I do to try to hunt down whats taking up so much of my hdd? (im fairly new to unix in general so i apologize if this is not well explained)

  Read the article

• background copy large files to a laptop?

  - by Roy Pardee

  Hey All, I like to watch windows media center recorded TV files on my laptop in bed. I find thought that when the programs are in HD I have a lot of stuttering and delays--no doubt b/c of the amount of data being transferred. I actually have a fair amount of space on the laptop's hdd, and wouldn't mind moving the files onto that hard drive, where no doubt my problem would go away. But that requires some planning & time for the files to move. Is there a utility out there that would kind of 'trickle' the files over to the laptop over a long period of time, w/out soaking its bandwidth? Something like ms' BITS tech? Both machines are running win7. Many thanks! -Roy

  Read the article

• HD movies stutter.

  - by Absolute0

  I just put together a new system build in the hopes that all of my daily tasks would run smoothly and without any hiccups. Unfortunately I am still seeing some sound and sometimes video stuttering when playing HD movies in VLC (no problems with xvid/divx files). My setup is as follows: Intel core i5 750 quad core 2.66mhz 4GB ram asus p55 motherboard radeon hd 5570 video card 650gb 7200rpm western digital sata HDD 23" Nec ea23wmi monitor Operating System: Windows 7 What might be the main bottleneck that needs upgrading to fix my delays? Seems like the hard drive might be the problem but anything faster than 7200rpm is beyond my budget for a decent hard drive. Could it be anything else?

  Read the article

• How to install network drivers during installation?

  - by Matt

  I have a server that I'm attempting to install windows onto. However, the disk is an iscsi target provided by ipxe. Everything appears to go well until about 3/4 through the install process I get an error about a critical driver missing and the installation is cancelled. I would say the critical driver would be the network card. It's an intel nic and the drivers are not on the windows installation CD. I tried slipstreaming them with RTSevenLite, but after it created the CD it seems it failed to make it bootable. I've also not been successful in making a bootable USB thumb drive or USB HDD. I suspect a buggy bios even though I have the latest. How to install network drivers during installation? Windows used to provide an optional F6 during install feature but this seems to be missing in Windows Servert 2008. Perhaps there is a way to do this, or another method?

  Read the article

• Graphics Startup Screen

  - by Wesley

  Specs: AMD Athlon XP 2400+ @ 1987 MHz / 2x 512MB PC3200 DDR RAM / 160GB IDE HDD / 128MB GeForce 6200 AGP / FIC AM37 / Windows XP Pro SP3 So, every time I start up my machine, there's a startup screen for the graphics card. It should display "NVIDIA GeForce 6200 VGA BIOS" with some other copyright information underneath it. However, it randomly changed to say "NV44A VGA BIOS." I think the GeForce 6200 codename is NV44A or something, but is there someway to change it back to say "GeForce 6200 VGA BIOS" or, if not, to completely stop it from showing upon startup? (Graphics drivers are all up to date.) Thanks in advance.

  Read the article

• What will happen with my RAID5 after motherboard change?

  - by abatishchev

  Currently I have ASUS P5Q-EM and 3 HDD in RAID5 using it's on-board RAID controller Intel ICH10R. I want to bye a new motherboard, for example, Gigabyte GA-EQ45M-S2 which also have on-board RAID controller, but Intel ICH10DO. What will happen with my data on RAID5? Will I have to re-create the array from the scratch and lost all my data? Is such array a soft RAID or soft-hard? What if my current motherboard will broken? What will happen with my data?

  Read the article

• development and music recording machine suggestions?

  - by dean nolan

  I wasn't sure if this belongs on SuperUser so flag if so. I am looking to build, primarily, a windows development machine that is also good for recording using Cubase. I know I should use seperate machines but I'm on a budget this time of year. I also havn't kept up with hardware for quite a few years. Basically I know I want quad core, multiple monitor support (no gaming requirements). A lot of RAM, very quiet case and super fast HDD (SSD OR 10,000RPM)for compiling and latency. I will store libraries and other data on a USB drive. Sound card is not needed as I will be using an audio interface, all other music recording equipment is taken care of also. I could do with some decent monitor recomendations also. All suggestions welcome, thanks.

  Read the article

• bash process uses 90% CPU, comes back on computer restart

  - by Sano

  I’ve replaced the old HDD of my late 2008 unibody MacBook (8 GB of RAM, running OS X 10.7.4) with an OCZ Vertex 3 SSD. After doing this, I've installed Lion and restored my data from a Time Machine backup. Everything is fine, except for a process named “bash” that permanently uses about 90 % CPU. If I kill it via Activity Monitor, everything goes back to normal, but unfortunately the process comes back every time I restart the computer. I've tried do zap the PRAM, reinstall 10.7.4 from the combo package, and even simply wait for more than 2 hours, but the problem is still here.

  Read the article

• Time Capsule Refuses to Connect After Interrupted File Transfer

  - by Steve Stifler

  I have a first generation Apple Time Capsule set up as a NAS on my network. I use the built-in hard drive for Time Machine backups, with a 1.5 TB external HDD attached to the Time Capsule over USB. Whenever I cancel a file transfer from the external drive to my Macbook (or quit a video I had been streaming from it, as was the most recent incident), I can no longer connect to the Time Capsule or the attached drive, and I have to unplug it to get it working again. How can I fix this? Is it a network error? Could the Time Capsule be at fault or could it be my computer?

  Read the article

• Windows 7 - Move location of Eventlog

  - by Jörg B.

  I am having a particular nasty problem of my main system drive 'disappearing' all of the sudden while the system is running. The vendor somewhat knows about this but has not managed to fix it completely over multiple fw iterations. Problems I have with the support is that I cannot provide any particular system log files/entries to further analyse what might have been going on because, well - windows cannot write to its 'lost' drive before bsod'ing. Is there any way to configure where Windows 7 stores its event logs so that I could specify a second physical hdd?

  Read the article

• Why does Windows spooler require an administrator account?

  - by Software Monkey

  Does anyone know what changes I might need to make to allow restricted users to print using a printer configured for spooling? My Windows XP SP3 system currently requires me to use an Admin account for printing if the printer is configured to spool documents before printing. If the printer is configured for direct printing it works for all accounts. This used to work and some months back it just stopped, and I can't pin down why. The printer, which is an HP PSC 1200 (an old printer) itself is configured for Everyone to have Print authority and my specific (restricted) account to have Full authority, that is Print, Manage Printers and Manager Documents. My HDD is locked down for restricted users given them only read authority to the entire file system except their data directories, which is how I have run my systems for years. I assume there may be a directory somewhere that I need to allow users to write to.

  Read the article

• Building a new PC, Installing XP, blue screen of death

  - by Tim

  I got a gigabyte barebones kit and am installing windows-XP(SP1) and the initial setup works, then it restarts and goes into the second phase of the setup. Then when installing components (I think that's what it says) it gets half way done and comes up with a blue screen saying IRQL_NOT_LESS_OR_EQUAL. BUT! I had gotten past that by installing windows-XP media center addition Now I am trying to install the drivers for my Asus ATI Radeon 5770 graphics card and I get another blue screen of death that doesnt give much info something about address x0000005. Would you think there is something wrong with something in my system or do you think if I got windows 7 that would take care of things? Sorry for probably not giving enough info. Here is what I have MotherBoard - Gigabyte S-series GA-H55M-S2(v) PSU - Ultra 500 watt atx HDD - Sata serial ATA Seagate Baracudda 7200 CPU - Intel i3 Memory - 4gig crucial Graphics Card - Asus ATI Radeon 5770 1Gig DDR5

  Read the article

• Set-and-forget Windows backup software with NAS-support?

  - by Evert

  Hi all, I am looking for set-and-forget backup software for Windows (Vista & 7, and if possible XP/2003). The idea is that it runs in the background on the clients, and does its thing towards a network-share. In case the HDD of one of these clients spontaneously combusts, all I want to have to do is: replace the drive, insert a USB-stick, boot from it, and restore the machine. It should support drives which use [ICH]-RAID. What are my options here? It looks like WHS meets all the requirements, but I am curious about my other options here.

  Read the article

• How to customize Windows 7 HAL library during installation (BSOD STOP: 0x000000A5)?

  - by koldovsky

  While trying to install Windows 7 x86 Ultimate on Samsung M40 laptop (Pentium M 1.7 Dothan, 2 GB RAM/ 100 GB HDD) i receive BSOD STOP: 0x000000A5: The bios in this system is not fully ACPI compliant. Please contact your system vendor for an updated bios. The bios on the system is updated to latest version. If ACPI is the real source of the issue it means that I possibly could use another HAL library. In Windows XP it is possible to install system with generic HAL library pressing F7 when installer asks to supply drivers, but on Windows 7 I can't find such option. Ironically, Vista installs and works nice, even if they said that Windows 7 is less demanding for hardware. Windows 7 Advisor also tells nothing suspicious. Can anybody tell me how to customize Windows 7 installer to use generic HAL library (if it is possible, of course) or point me to another solution?

  Read the article

• Are these components compatible and are there any significant bottlenecks?

  - by Tom Gullen

  I'm trying to buy a new pc, for software dev and a bit of gaming. I already have a 500gb HDD , and a PCI sound card I want to use as well. Is all this stuff compatible, and will it all work together and are there any significant bottlenecks? Case, Mobo and PSU "Primo Motion" AMD 880G DDR3 Ready Barebones (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=FS-268-OK&groupid=43&catid=1817&subcat= SSD 64GB Crucial RealSSD C300 64GB 2.5" SATA 6Gb/s Solid State Hard Drive http://www.overclockers.co.uk/showproduct.php?prodid=HD-007-CR&groupid=1657&catid=1660&subcat=1668 CPU AMD Phenom II X6 Six Core 1090T Black Edition 3.20GHz (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=CP-266-AM&groupid=701&catid=6&subcat=1944 RAM 8GB Corsair Vengeance 8GB (2x4GB) DDR3 PC3-15000C9 1866MHz Dual Channel Kit http://www.overclockers.co.uk/showproduct.php?prodid=MY-292-CS&groupid=701&catid=8&subcat=1387 Graphics XFX ATI Radeon HD 5770 1024MB GDDR5 PCI-Express Graphics Card http://www.overclockers.co.uk/showproduct.php?prodid=GX-149-XF

  Read the article

• Can you play Halo 2 and Halo 3 on an Xbox360 Arcade?

  - by Jeremy Rudd

  I'm looking at purchasing a Xbox360 because I've wanted to catch up with the Halo trilogy. Does the cheap Arcade edition console support Halo 2 and Halo 3? Would I be able to save my game progress in single player? Would I be able to play online in typical maps? Would I be able to play games using the DVD drive or do I have to download everything? Does the tiny HDD hurt even if I don't download any games, trailers or music? Are there any other differences in comparison to the Xbox360 Pro? I have a regular TV that uses the composite cable, so I don't need the HDTV support in the Pro edition.

  Read the article

• Unable to boot to Ubuntu. Inconsistency in disk, X server didn't start. Illegal blocks in Inode

  - by becomingGuru

  I am unable to boot into my Ubuntu system. First I get that fsck died with exit status 4 Then I try to do it manually as prompted and I get that an Inode has illegal blocks and asked to clear it. Upon googling, I found that is because my HD has some problems I booted via Live cd and took a dd of the entire Ubuntu on an external HDD just in case. Is it safe to clear all the illegal blocks. How do I safely restore my environment if I replace my HD. Is there any thing i can do in the meanwhile to continue to use my laptop without significant loss of data. Perhaps a related error, the x server fails to start

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >