Search Results

Search found 1622 results on 65 pages for 'branch'.

Page 59/65 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• How can I change the default startup directory for cmd.exe?

  - by Nano HE

  Hi. My Procedure last day as below Click Start, Run and type Regedit.exe Navigate to the following branch: HKEY_CURRENT_USER \ Software \ Microsoft \ Command Processor In the right-pane, double-click Autorun and set the startup folder path as its data, preceded by “CD /d “. If Autorun value is missing, you need to create one, of type REG_EXPAND_SZ or REG_SZ in the above location. Example: To set the startup directory to D:\learning\perl, set the Autorun value data to CD /d D:\learning\perl Then I clicked Start, run and type cmd. It successfully. I could do perl practice more conveniently now. But today, I find when I try to build my Visual Studio 2005 solution which included some Pre-build event Command like this: perl.exe MyAppVersion.pl perl.exe AttrScan.pl It doesn't work. Show error: can't find the path. I check the environment variable setting and find the variable-path and it's value-c:\perl\bin\; still exist. Finially, I try to removed the Regedit.exe configuration "Autorun" value and test again. The issue fixed. I only changed the default startup directory for cmd.exe command. Why the pre-build event perl command was impacted? (I am using winxp and activePerl 5.8)

  Read the article

• how to trigger a script located on a machine in one domain from a machine on another domain

  - by user326814

  Hi, I am basically from QA. What we testers do each day is 1. Open a web browser. Type in http://11.12.13.27.8080/cruisecontrol (since we are in a particular network, only we can access this) 2. Check if the latest nightly build has been successful. If it is successful, deploy it on a test environment by clicking on 'Deploy this build' link. This deploying takes around 1-1.5 hours. During this time we cannot use our machines to work on anything else. Only after this deploying can we begin to test. Now, i wanted to know if its possible to do the below. When at home in the morning, i use something which will trigger a script (which will be on my machine at workplace). This script will inturn automatically deploy the build. I already have such a similar script. What i want to know is how is it possible to trigger this script from my home machine? Is it even possible? For e.g the external trigger will say "Deploy xxx branch on yyy test environment". So the script on my workplace machine will be invoked and it will automatically deploy it before i actually come to my desk. Please help. I am from QA and have no idea about all this.

  Read the article

• Remove file from history completely

  - by Iain

  A colleague has done a few things I told them not to do: forked the origin repo online cloned the fork, added a file that shouldn't have been added to that local repo pushed this to their fork I've then: merged the changes from the fork and found the file I want to remove this from: my local repo the fork their local repo I have a solution for removing something from the history, taken from Remove file from git repository (history). What I need to know is, should my colleague also go through this, and will a subsequent push remove all info from the fork? (I'd like an alternative to just destroying the fork, as I'm not sure my colleague will do this) SOLUTION: This is the shortest way to get rid of the files: check .git/packed-refs - my problem was that I had there a refs/remotes/origin/master line for a remote repository, delete it, otherwise git won't remove those files (optional) git verify-pack -v .git/objects/pack/#{pack-name}.idx | sort -k 3 -n | tail -5 - to check for the largest files (optional) git rev-list --objects --all | grep a0d770a97ff0fac0be1d777b32cc67fe69eb9a98 - to check what files those are git filter-branch --index-filter 'git rm --cached --ignore-unmatch file_names' - to remove the file from all revisions rm -rf .git/refs/original/ - to remove git's backup git reflog expire --all --expire='0 days' - to expire all the loose objects (optional) git fsck --full --unreachable - to check if there are any loose objects git repack -A -d - repacking the pack git prune - to finally remove those objects

  Read the article

• NHibernate: Using value tables for optimization AND dynamic join

  - by Kostya

  Hi all, My situation is next: there are to entities with many-to-many relation, f.e. Products and Categories. Also, categories has hierachial structure, like a tree. There is need to select all products that depends to some concrete category with all its childs (branch). So, I use following sql statement to do that: SELECT * FROM Products p WHERE p.ID IN ( SELECT DISTINCT pc.ProductID FROM ProductsCategories pc INNER JOIN Categories c ON c.ID = pc.CategoryID WHERE c.TLeft >= 1 AND c.TRight <= 33378 ) But with big set of data this query executes very long and I found some solution to optimize it, look at here: DECLARE @CatProducts TABLE ( ProductID int NOT NULL ) INSERT INTO @CatProducts SELECT DISTINCT pc.ProductID FROM ProductsCategories pc INNER JOIN Categories c ON c.ID = pc.CategoryID WHERE c.TLeft >= 1 AND c.TRight <= 33378 SELECT * FROM Products p INNER JOIN @CatProducts cp ON cp.ProductID = p.ID This query executes very fast but I don't know how to do that with NHIbernate. Note, that I need use only ICriteria because of dynamic filtering\ordering. If some one knows a solution for that, it will be fantastic. But I'll pleasure to any suggestions of course. Thank you ahead, Kostya

  Read the article

• Do Distributed Version Control Systems promote poor backup habits?

  - by John

  In a DVCS, each developer has an entire repository on their workstation, to which they can commit all their changes. Then they can merge their repo with someone else's, or clone it, or whatever (as I understand it, I'm not a DVCS user). To me that flags a side-effect, of being more vulnerable to forgetting to backup. In a traditional centralised system, both you as a developer and the people in charge know that if you commit something, it's held on a central server which can have decent backup solutions in place. But using a DVCS, it seems you only have to push your work to a server when you feel like sharing it. It's all very well you have the repo locally so you can work on your feature branch for a month without bothering anyone, but it means (I think) that checking in your code to the repo is not enough, you have to remember to do regular pushes to a backed-up server. It also means, doesn't it, that a team lead can't see all those nice SVN commit emails to keep a rough idea what's going on in the code-base? Is any of this a real issue?

  Read the article

• How to upgrade a 1.4.3 TortoiseSVN-created repository to 1.6.x?

  - by SiegeX

  A few years ago, TortoiseSVN 1.4.3 was deployed to our software development team and we are now looking at upgrading the client to the latest 1.6.x version. I had hoped this upgrade would be transparent with the additional features and modifications being client-side. For the most part, this was true except for a very important feature -- merging. When I try to merge a feature branch back into truck I get a show-stopping "Merge tracking not supported error." Here are some facts worth noting: When the repo was first created (before I was on board), it was created via the TortoiseSVN client itself. We do not have a 'svn server daemon' per se, rather the repository folders/database resides on a share folder that is accessible from our workstation machines via file:///. This was actually an eye opener for me, I had always thought there was some SVN server daemon we were talking to. We do not have any access to the underlying machine hosting the SVN share other than the ability to read/write to the share itself. I don't even know what OS the machine is running on. This share server was chosen because its drives are backed up nightly by our IT group. In all honesty, we really don't need the merge tracking feature although it would be nice to have. For the time being it would be sufficient to be able to use a 1.6.x TortoiseSVN client on the 1.4.3 repository and have it merge (sans tracking) without error. So now the question becomes, how does one upgrade a client-created 1.4.3 repo to a 1.6.x compatible version without access to the underlying machine the repo resides on? I was hoping the TortoiseSVN client itself had the ability to do this but that does not appear to be the case. Will I be forced to copy the entire repo over to my local drive, run some svn commands to upgrade the repo locally then copy the repo back to the share point? If so, will doing this break any compatibility with the the 1.4.3 clients in case we cant upgrade them all at the same time? Thanks for the help.

  Read the article

• How to upgrade a 1.4.3 TortoiseSVN-created repository to 1.6.x?

  - by SiegeX

  A few years ago, TortoiseSVN 1.4.3 was deployed to our software development team and we are now looking at upgrading the client to the latest 1.6.x version. I had hoped this upgrade would be transparent with the additional features and modifications being client-side. For the most part, this was true except for a very important feature -- merging. When I try to merge a feature branch back into truck I get a show-stopping "Merge tracking not supported error." Here are some facts worth noting: When the repo was first created (before I was on board), it was created via the TortoiseSVN client itself. We do not have a 'svn server daemon' per se, rather the repository folders/database resides on a share folder that is accessible from our workstation machines via file:///. This was actually an eye opener for me, I had always thought there was some SVN server daemon we were talking to. We do not have any access to the underlying machine hosting the SVN share other than the ability to read/write to the share itself. I don't even know what OS the machine is running on. This share server was chosen because its drives are backed up nightly by our IT group. In all honesty, we really don't need the merge tracking feature although it would be nice to have. For the time being it would be sufficient to be able to use a 1.6.x TortoiseSVN client on the 1.4.3 repository and have it merge (sans tracking) without error. So now the question becomes, how does one upgrade a client-created 1.4.3 repo to a 1.6.x compatible version without access to the underlying machine the repo resides on? I was hoping the TortoiseSVN client itself had the ability to do this but that does not appear to be the case. Will I be forced to copy the entire repo over to my local drive, run some svn commands to upgrade the repo locally then copy the repo back to the share point? If so, will doing this break any compatibility with the the 1.4.3 clients in case we cant upgrade them all at the same time? Thanks for the help.

  Read the article

• 2010 Collaboration Summit Impressions

  - by Elena Zannoni

  It's a bit late, but there you have it anyway. April 14 to 16 I attended the Linux Foundation Collaboration Summit in SFO. I was running two tracks, one on tracing and one on tools. You can see the tracks and the slides here: http://events.linuxfoundation.org/events/collaboration-summit/slides I was pretty busy both days, Thursday with a whole day tracing track, Friday with a half day toolchain track. The sessions were well attended, the rooms were full, with people spilling in the hallways. Some new things were presented, like Kernelshark, by Steve Rostedt, a GUI (yes, believe it or not, a GUI) written in GTK. It is very nice, showing a timeline for traced kernel events, and you can zoom in and filter at will. It works on the latest kernels, and it requires some new things/fixes in GTK. I don't recall exactly what version of GTK though. Dominique Toupin from Ericsson presented something about user requirements for tracing. Mostly though about who's who in the embedded world, and eclipse. Masami and Mathieu presented an update on their work. See their slides. The interesting thing to me was of course the new version of uprobes w/o underlying utrace presented by Jim Keniston. At the end of the session we had a discussion about the future of utrace. Roland wasn't there, butTom Tromey (also from RedHat) collected the feedback. Basically we are at a standstill now that utrace has been rejected yet again. There wasn't much advise that anybody could give, except jokingly, we decided that the only way in is to make it a part of perf events. There needs to be another refactoring, but most of all, this "killer app" that would be enabled because of utrace hasn't materialized yet. We think that having a good debugging story on Linux is enough of a killer app, for instance allowing multiple tracers, and not relying on SIGCHLD etc. I think this wasn't completely clear to the kernel community. Trying to achieve debugging via a gdb stub inside the kernel interfacing to utrace and that is controlled via the gdb remote protocol also lost its appeal (thankfully, since the gdb remote protocol is archaic). Somebody would have to be creative in how to submit utrace. It doesn't have to be called utrace (it was really a random choice, for lack of a letter that was not already used in front of the word "trace"). So basically, I think the ideas behind utrace are sound, and the necessity of a new interface is acknowledged. But I believe the integration/submission process with the kernel folks has to restart from scratch, clean slate. We'll see. There are many conferences and meetings coming up in the near future where things can be discussed further. On the second day, Friday, we had the tools talks. It was interesting to observe the more "kernel" oriented people's behavior towards the gcc etc community. The first talk was by Mark Mitchell, about Gcc and its new plugin architecture. After that, Paolo talked about the new C++1x standard, which will be finalized in 2011. Many features are already implemented in the libstdc++ library and gcc and usable today. We had a few minutes (really, the half day track was quite short) where Bradley Kuhn from the Software Freedom Law Center explained the GPLv3 exception for gcc (due to the new gcc plugin architecture and the availability of the intermediate results from the compilation, which is a new thing). I will not try to explain, but basically you cannot take the result of the preprocessing and then use that in your own proprietary compiler. After, we had a talk by Ian Taylor about the new Gold linker. One good thing in that area is that they are trying to make gold the new default linker (for instance Fedora will use gold as the distro linker). However gold is very different from binutils' old linker. It doesn't use a linker script, for instance. The kernel has been linked with gold many times as an exercise (the ground work was done by Kris Van Hees), but this needs to be constantly tested/monitored because the kernel linker script is very complex, and uses esoteric features (Wenji is now monitoring that each kernel RC can be built with gold). It was positive that people are now aware of gold and the need for it to be ported to more architectures. It seems that the porting is very easy, with little arch dependent code. Finally Tom Tromey presented about gdb and the archer project. Archer is a development branch of gdb mostly done by RedHat, where they are focusing on better c++ printing, c++ expression parsing, and plugins. The archer work is merged regularly in the gdb mainline. In general it was a good conference. I did miss most of the first day, because that's when I flew in. But I caught a couple of talks. Nothing earth shattering, except for Google giving each person registered a free Android phone. Yey.

  Read the article

• Part 14: Execute a PowerShell script

  In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application With PowerShell you can add powerful scripting to your build to for example execute a deployment. If you want more information on PowerShell, please refer to http://technet.microsoft.com/en-us/library/aa973757.aspx For this example we will create a simple PowerShell script that prints “Hello world!”. To create the script, create a new text file and name it “HelloWorld.ps1”. Add to the contents of the script: Write-Host “Hello World!” To test the script do the following: Open the command prompt To run the script you must change the execution policy. To do this execute in the command prompt: powershell set-executionpolicy remotesigned Now go to the directory where you have saved the PowerShell script Execute the following command powershell .\HelloWorld.ps1 In this example I use a relative path, but when the path to the PowerShell script contains spaces, you need to change the syntax to powershell "& '<full path to script>' " for example: powershell "& ‘C:\sources\Build Customization\SolutionToBuild\PowerShell Scripts\HellloWorld.ps1’ " In this blog post, I create a new solution and that solution includes also this PowerShell script. I want to create an argument on the Build Process Template that holds the path to the PowerShell script. In the Build Process Template I will add an InvokeProcess activity to execute the PowerShell command. This InvokeProcess activity needs the location of the script as an argument for the PowerShell command. Since you don’t know the full path at the build server of this script, you can either specify in the argument the relative path of the script, but it is hard to find out what the relative path is. I prefer to specify the location of the script in source control and then convert that server path to a local path. To do this conversion you can use the ConvertWorkspaceItem activity. So to complete the task, open the Build Process Template CustomTemplate.xaml that we created in earlier parts, follow the following steps Add a new argument called “DeploymentScript” and set the appropriate settings in the metadata. See Part 2: Add arguments and variables  for more information. Scroll down beneath the TryCatch activity called “Try Compile, Test, and Associate Changesets and Work Items” Add a new If activity and set the condition to "Not String.IsNullOrEmpty(DeploymentScript)" to ensure it will only run when the argument is passed. Add in the Then branch of the If activity a new Sequence activity and rename it to “Start deployment” Click on the activity and add a new variable called DeploymentScriptFilename (scoped to the “Start deployment” Sequence Add a ConvertWorkspaceItem activity on the “Start deployment” Sequence Add a InvokeProcess activity beneath the ConvertWorkspaceItem activity in the “Start deployment” Sequence Click on the ConvertWorkspaceItem activity and change the properties DisplayName = Convert deployment script filename Input = DeploymentScript Result = DeploymentScriptFilename Workspace = Workspace Click on the InvokeProcess activity and change the properties Arguments = String.Format(" ""& '{0}' "" ", DeploymentScriptFilename) DisplayName = Execute deployment script FileName = "PowerShell" To see results from the powershell command drop a WriteBuildMessage activity on the "Handle Standard Output" and pass the stdOutput variable to the Message property. Do the same for a WriteBuildError activity on the "Handle Error Output" To publish it, check in the Build Process Template This leads to the following result We now go to the build definition that depends on the template and set the path of the deployment script to the server path to the HelloWorld.ps1. (If you want to see the result of the PowerShell script, change the Logging verbosity to Detailed or Diagnostic). Save and run the build. A lot of the deployment scripts you have will have some kind of arguments (like username / password or environment variables) that you want to define in the Build Definition. To make the PowerShell configurable, you can follow the following steps. Create a new script and give it the name "HelloWho.ps1". In the contents of the file add the following lines: param (         $person     ) $message = [System.String]::Format(“Hello {0}!", $person) Write-Host $message When you now run the script on the command prompt, you will see the following So lets change the Build Process Template to accept one parameter for the deployment script. You can of course make it configurable to add a for-loop that reads through a collection of parameters but that is out of scope of this blog post. Add a new Argument called DeploymentScriptParameter In the InvokeProcess activity where the PowerShell command is executed, modify the Arguments property to String.Format(" ""& '{0}' '{1}' "" ", DeploymentScriptFilename, DeploymentScriptParameter) Check in the Build Process Template Now modify the build definition and set the Parameter of the deployment to any value and run the build. You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

  Read the article

• Off The Beaten Path—Three Things Growing Midsize Companies are Thankful For

  - by Christine Randle

  By: Jim Lein, Senior Director, Oracle Accelerate Last Sunday I went on a walkabout.  That’s when I just step out the door of my Colorado home and hike through the mountains for hours with no predetermined destination. I favor “social trails”, the unmapped routes pioneered by both animal and human explorers.  These tracks  are usually more challenging than established, marked routes and you can’t be 100% sure of where you’re going to end up. But I’ve found the rewards to be much greater. For awhile, I pondered on how—depending upon your perspective—the current economic situation worldwide could be viewed as either a classic “the glass is half empty” or a “the glass is half full” scenario. Midsize companies buy Oracle to grow and so I’m continually amazed and fascinated by the success stories our customers relate to me.  Oracle’s successful midsize companies are growing via innovation, agility, and opportunity. For them, the glass isn’t half full—it’s overflowing. Growing Midsize Companies are Thankful for: Innovation The sun angling through the pine trees reminded me of a conversation with a European customer a year ago May.  You might not recognize the name but, chances are, your local evening weather report relies on this company’s weather observation, monitoring and measurement products.  For decades, the company was recognized in its industry for product innovation, but its recent rapid growth comes from tailoring end to end product and service solutions based on the needs of distinctly different customer groups across industrial, public sector, and defense sectors.  Hours after that phone call I was walking my dog in a local park and came upon a small white plastic box sprouting short antennas and dangling by a nylon cord from a tree branch.  I cut it down. The name of that customer’s company was stamped on the housing. “It’s a radiosonde from a high altitude weather balloon,” he told me the next day. “Keep it as a souvenir.”  It sits on my fireplace mantle and elicits many questions from guests. Growing Midsize Companies are Thankful for: Agility In July, I had another interesting discussion with the CFO of an Asia-Pacific company which owns and operates a large portfolio of leisure assets. They are best known for their epic outdoor theme parks. However, their primary growth today is coming from a chain of indoor amusement centers in the USA where billiards, bowling, and laser tag take the place of roller coasters, kiddy rides, and wave pools. With mountains and rivers right out my front door, I’m not much for theme parks, but I’ll take a spirited game of laser tag any day.  This company has grown dramatically since first implementing Oracle ERP more than a decade ago. Their profitable expansion into a completely foreign market is derived from the ability to replicate proven and efficient best business practices across diverse operating environments.  They recently went live on Oracle’s Fusion HCM and Taleo. Their CFO explained to me how, with thousands of employees in three countries, Fusion HCM and Taleo would enable them to remain incredibly agile by acting on trends linking individual employee performance to their management, establishing and maintaining those best practices. Growing Midsize Companies are Thankful for: Opportunity I have three GPS apps on my iPhone. I use them mainly to keep track of my stats—distance, time, and vertical gain. However, every once in awhile I need to find the most efficient route back home before dark from my current location (notice I didn’t use the word “lost”). In August I listened in on an interview with the CFO of another European company that designs and delivers telematics solutions—the integrated use of telecommunications and informatics—for managing the mobile workforce. These solutions enable customers to achieve evolutionary step-changes in their performance and service delivery. Forgive the overused metaphor, but this is route optimization on steroids.  The company’s executive team saw an opportunity in this emerging market and went “all in”. Consequently, they are being rewarded with tremendous growth results and market domination by providing the ability for their clients to collect and analyze performance information related to fuel consumption, service workforce safety, and asset productivity. This Thanksgiving, I’m thankful for health, family, friends, and a career with an innovative company that helps companies leverage top tier software to drive and manage growth. And I’m thankful to have learned the lesson that good things happen when you get off the beaten path—both when hiking and when forging new routes through a complex world economy. Halfway through my walkabout on Sunday, after scrambling up a long stretch of scree-covered hill, I crested a ridge with an obstructed view of 14,265 ft Mt Evans just a few miles to the west.  There, nowhere near a house or a trail, someone had placed a wooden lounge chair. Its wood was worn and faded but it was sturdy. I had lunch and a cold drink in my pack. Opportunity knocked and I seized it. Happy Thanksgiving.  

  Read the article

• NET Math Libraries

  - by JoshReuben

  NET Mathematical Libraries   .NET Builder for Matlab The MathWorks Inc. - http://www.mathworks.com/products/netbuilder/ MATLAB Builder NE generates MATLAB based .NET and COM components royalty-free deployment creates the components by encrypting MATLAB functions and generating either a .NET or COM wrapper around them. .NET/Link for Mathematica www.wolfram.com a product that 2-way integrates Mathematica and Microsoft's .NET platform call .NET from Mathematica - use arbitrary .NET types directly from the Mathematica language. use and control the Mathematica kernel from a .NET program. turns Mathematica into a scripting shell to leverage the computational services of Mathematica. write custom front ends for Mathematica or use Mathematica as a computational engine for another program comes with full source code. Leverages MathLink - a Wolfram Research's protocol for sending data and commands back and forth between Mathematica and other programs. .NET/Link abstracts the low-level details of the MathLink C API. Extreme Optimization http://www.extremeoptimization.com/ a collection of general-purpose mathematical and statistical classes built for the.NET framework. It combines a math library, a vector and matrix library, and a statistics library in one package. download the trial of version 4.0 to try it out. Multi-core ready - Full support for Task Parallel Library features including cancellation. Broad base of algorithms covering a wide range of numerical techniques, including: linear algebra (BLAS and LAPACK routines), numerical analysis (integration and differentiation), equation solvers. Mathematics leverages parallelism using .NET 4.0's Task Parallel Library. Basic math: Complex numbers, 'special functions' like Gamma and Bessel functions, numerical differentiation. Solving equations: Solve equations in one variable, or solve systems of linear or nonlinear equations. Curve fitting: Linear and nonlinear curve fitting, cubic splines, polynomials, orthogonal polynomials. Optimization: find the minimum or maximum of a function in one or more variables, linear programming and mixed integer programming. Numerical integration: Compute integrals over finite or infinite intervals, over 2D and higher dimensional regions. Integrate systems of ordinary differential equations (ODE's). Fast Fourier Transforms: 1D and 2D FFT's using managed or fast native code (32 and 64 bit) BigInteger, BigRational, and BigFloat: Perform operations with arbitrary precision. Vector and Matrix Library Real and complex vectors and matrices. Single and double precision for elements. Structured matrix types: including triangular, symmetrical and band matrices. Sparse matrices. Matrix factorizations: LU decomposition, QR decomposition, singular value decomposition, Cholesky decomposition, eigenvalue decomposition. Portability and performance: Calculations can be done in 100% managed code, or in hand-optimized processor-specific native code (32 and 64 bit). Statistics Data manipulation: Sort and filter data, process missing values, remove outliers, etc. Supports .NET data binding. Statistical Models: Simple, multiple, nonlinear, logistic, Poisson regression. Generalized Linear Models. One and two-way ANOVA. Hypothesis Tests: 12 14 hypothesis tests, including the z-test, t-test, F-test, runs test, and more advanced tests, such as the Anderson-Darling test for normality, one and two-sample Kolmogorov-Smirnov test, and Levene's test for homogeneity of variances. Multivariate Statistics: K-means cluster analysis, hierarchical cluster analysis, principal component analysis (PCA), multivariate probability distributions. Statistical Distributions: 25 29 continuous and discrete statistical distributions, including uniform, Poisson, normal, lognormal, Weibull and Gumbel (extreme value) distributions. Random numbers: Random variates from any distribution, 4 high-quality random number generators, low discrepancy sequences, shufflers. New in version 4.0 (November, 2010) Support for .NET Framework Version 4.0 and Visual Studio 2010 TPL Parallellized – multicore ready sparse linear program solver - can solve problems with more than 1 million variables. Mixed integer linear programming using a branch and bound algorithm. special functions: hypergeometric, Riemann zeta, elliptic integrals, Frensel functions, Dawson's integral. Full set of window functions for FFT's. Product  Price Update subscription Single Developer License $999  $399  Team License (3 developers) $1999  $799  Department License (8 developers) $3999  $1599  Site License (Unlimited developers in one physical location) $7999  $3199    NMath http://www.centerspace.net .NET math and statistics libraries matrix and vector classes random number generators Fast Fourier Transforms (FFTs) numerical integration linear programming linear regression curve and surface fitting optimization hypothesis tests analysis of variance (ANOVA) probability distributions principal component analysis cluster analysis built on the Intel Math Kernel Library (MKL), which contains highly-optimized, extensively-threaded versions of BLAS (Basic Linear Algebra Subroutines) and LAPACK (Linear Algebra PACKage). Product  Price Update subscription Single Developer License $1295 $388 Team License (5 developers) $5180 $1554   DotNumerics http://www.dotnumerics.com/NumericalLibraries/Default.aspx free DotNumerics is a website dedicated to numerical computing for .NET that includes a C# Numerical Library for .NET containing algorithms for Linear Algebra, Differential Equations and Optimization problems. The Linear Algebra library includes CSLapack, CSBlas and CSEispack, ports from Fortran to C# of LAPACK, BLAS and EISPACK, respectively. Linear Algebra (CSLapack, CSBlas and CSEispack). Systems of linear equations, eigenvalue problems, least-squares solutions of linear systems and singular value problems. Differential Equations. Initial-value problem for nonstiff and stiff ordinary differential equations ODEs (explicit Runge-Kutta, implicit Runge-Kutta, Gear's BDF and Adams-Moulton). Optimization. Unconstrained and bounded constrained optimization of multivariate functions (L-BFGS-B, Truncated Newton and Simplex methods).   Math.NET Numerics http://numerics.mathdotnet.com/ free an open source numerical library - includes special functions, linear algebra, probability models, random numbers, interpolation, integral transforms. A merger of dnAnalytics with Math.NET Iridium in addition to a purely managed implementation will also support native hardware optimization. constants & special functions complex type support real and complex, dense and sparse linear algebra (with LU, QR, eigenvalues, ... decompositions) non-uniform probability distributions, multivariate distributions, sample generation alternative uniform random number generators descriptive statistics, including order statistics various interpolation methods, including barycentric approaches and splines numerical function integration (quadrature) routines integral transforms, like fourier transform (FFT) with arbitrary lengths support, and hartley spectral-space aware sequence manipulation (signal processing) combinatorics, polynomials, quaternions, basic number theory. parallelized where appropriate, to leverage multi-core and multi-processor systems fully managed or (if available) using native libraries (Intel MKL, ACMS, CUDA, FFTW) provides a native facade for F# developers

  Read the article

• BI&EPM in Focus June 2014

  - by Mike.Hallett(at)Oracle-BI&EPM

  Applications Webcast Centre – A Library of Discussion and Research for Best Practice: Achieving Reliable Planning, Budgeting and Forecasting Talent Analytics and Big Data – Is HR ready for the challenge Enterprise Data – The cost of non-quality Customers Josephine Niemiec from ADP talks about Oracle Hyperion Workforce Planning at Collaborate 2014 (link) Video Chris Nelms from Ameren talks about Oracle BI Spend and Procurement Analytics at Collaborate 2014 (link) Video Leggett & Platt Leverages Oracle Hyperion EPM and Demantra (link) Video Pella Corporation Accelerates Close Cycle by Cutting Time for Financial Consolidation from Three Days to Less Than One Day (link) Secretaría General de Administración de Justicia en España Enhances Citizen Services with Near-Real-Time Business Intelligence Gleaned from 500 Databases  (link) Bellco Credit Union Speeds Budget Development by 30%—Gains Insight into Specific Branch and Financial Product Profitability  (link)  Video QDQ media Speeds up Financial Reporting by 24x, Gains Business Agility, and Integrates Seamlessly into Corporate Accounting System  (link) Westfield Group Maximizes Shopping Mall Revenue, Shortens Year-End Financial Consolidation by 75%  (link)  IL&FS Transportation Networks Shortens Financial Consolidation and Reporting Cycle by Eight Days, Gains In-Depth Insight into Business Performance   (link) Angel Trains Optimizes Rail Operations for Purchasing, Sourcing, and Project Management to Meet Challenges of Evolving Rail Industry  (link) Enterprise Performance Management June 11, at Oracle Utrecht, NL: Morning session: Explore Planning and Budgeting in the Cloud (link) June 12, London: PureApps Presents: Best Practice Financial Consolidation and Reporting Workshop (link) July 3, Koln: Oracle Hyperion Business Analytics Roundtable (link) Blog: What's Your Tax Strategy? Automate the Operational Transfer Pricing Process (link) YouTube Video: Automate Tax Reporting with Oracle Hyperion Tax Provision (link) YouTube Video: Introducing Oracle Hyperion Planning’s Tablet Optimized Interface (link) OracleEPMWebcasts @ YouTube (link) Partner webcasts: Wednesday, 4 June, 5.00 GMT - Case Study:  Lessons Learned from Edgewater Ranzal's Internal Implementation of Oracle Planning & Budgeting Cloud Service (PBCS) - Learn more and register here! Thursday, 5 June, 4.00 GMT - Achieving Accountable Care Using Oracle Technology - Learn more and register here! Tuesday, 17 June, 4.00 GMT - Optimizing Performance for Oracle EPM Systems - Learn more and register here! Oracle University Blog: The Coolest Features Available with Oracle Hyperion 11.1.2.3 – Training from OU to help you to best use them (link) Support: Proactive Support: EPM Hyperion Planning 11.1.2.3.500 Using RMI Service [Blog] Proactive Support: Planning and Budgeting Cloud Service Videos (link) Planning and Budgeting Cloud Service (PBCS) 11.1.2.3.410 Patch Bundle [Doc ID 1670981.1] Hyperion Analytic Provider Services 11.1.2.2.106 Patch Set Update [Doc ID 1667350.1] Hyperion Essbase 11.1.2.2.106 Patch Set Update [Doc ID 1667346.1] Hyperion Essbase Administration Services 11.1.2.2.106 Patch Set Update [Doc ID 1667348.1] Hyperion Essbase Studio 11.1.2.2.106 Patch Set Update [Doc ID 1667329.1] Hyperion Smart View 11.1.2.5.210 Patch Set Update [Doc ID 1669427.1] Using HPCM, HSF or DRM Communities (link) Business Intelligence June 12, Birmingham, UK: Oracle Big Data at Work - Use Cases and Architecture (link) June 17, London: Oracle at Cloud & Big Data World Forums (link) June 17, Partner Webcast: Transform your Planning Capabilities with Peloton's CloudAccelerator for Oracle PBCS (link) June 19, London: Oracle at the Whitehall Media Big Data Analytics Conference and Exhibition (link) June 19, London: Partner Event - Agile BI Conference by Peak Indicators [link] June 25, Munich: Oracle Special Day auf der TDWI 2014 Konferenz (link) July 15, London: Oracle Endeca Information Discovery Workshop (link) July 16, London: BI Applications Workshop – Financial Analytics & Procurement Analytics (link) July 17, London: BI Applications Workshop – HR Analytics (link) Milan, Italy: L’Osservatorio Big Data Analytics & Business Intelligence with Politecnico di Milano (link) OBIA 11.1.1.8.1 - Now Available [Blog] What’s New in OBIA 11.1.1.8.1 [Blog] BI Blog: A closer look at Oracle BI Applications 11.1.1.8.1 release (link) Press Release: BI Applications Deliver Greater Insight into Talent and Procurement (link) Support Blog: OBIA 11.1.1.8.1 Upgrade Guide & Documentation (link) YouTube Video: Glenn Hoormann of Ludus talks to us about Oracle Business Intelligence and ERP at Collaborate 2014 (Link) YouTube Video: Performance Architects talks about key BI and Mobile trends, including Endeca at Collaborate 2014 (link) Big Data Blog: 3 Keys for Using Big Data Effectively for Enhanced Customer Experience (link) Big Data Lite Demo VM 3.0 Now Available on OTN BI Blog: Data Relationship Governance - Workflow in a Bottle (link) MDM Blog: Register for Product Data Management Weekly Cloudcasts (link) MDM Blog: Improve your Customer Experience with High Quality Information (link) MDM Blog: Big Data Challenges & Considerations (link) Oracle University: Oracle BI Applications 11g: Implementation using ODI (link) Proactive Support: Monthly Index [Blog] My Oracle Support: Partner Accreditation for Business Analytics Support [Blog] OBIEE 11g Test-to-Production (T2P) / Clone Procedures Guide [Blog] Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Who broke the build?

  - by Martin Hinshelwood

  I recently sent round a list of broken builds at SSW and asked for them to be fixed or deleted if they are not being used. My colleague Peter came back with a couple of questions which I love as it tells me that at least one person reads my email I think first we need to answer a couple of other questions related to builds in general.   Why do we want the build to pass? Any developer can pick up a project and build it Standards can be enforced Constant quality is maintained Problems in code are identified early What could a failed build signify? Developers have not built and tested their code properly before checking in. Something added depends on a local resource that is not under version control or does not exist on the target computer. Developers are not writing tests to cover common problems. There are not enough tests to cover problems. Now we know why, lets answer Peters questions: Where is this list? (can we see it somehow) You can normally only see the builds listed for each project. But, you have a little application called “Build Notifications” on your computer. It is installed when you install Visual Studio 2010. Figure: Staring the build notification application on Windows 7. Once you have it open (it may disappear into your system tray) you should click “Options” and select all the projects you are involved in. This application only lists projects that have builds, so don’t worry if it is not listed. This just means you are about to setup a build, right? I just selected ALL projects that have builds. Figure: All builds are listed here In addition to seeing the list you will also get toast notification of build failure’s. How can we get more info on what broke the build? (who is interesting too, to point the finger but more important is what) The only thing worse than breaking the build, is continuing to develop on a broken build! Figure: I have highlighted the users who either are bad for braking the build, or very bad for not fixing it. To find out what is wrong with a build you need to open the build definition. You can open a web version by double clicking the build in the image above, or you can open it from “Team Explorer”. Just connect to your project and open out the “Builds” tree. Then Open the build by double clicking on it. Figure: Opening a build is easy, but double click it and then open a build run from the list. Figure: Good example, the build and tests have passed Figure: Bad example, there are 133 errors preventing POK from being built on the build server. For identifying failures see: Solution: Getting Silverlight to build on Team Build 2010 RC Solution: Testing Web Services with MSTest on Team Build Finding the problem on a partially succeeded build So, Peter asked about blame, let’s have a look and see: Figure: The build has been broken for so long I have no idea when it was broken, but everyone on this list is to blame (I am there too) The rest of the history is lost in the sands of time, there is no way to tell when the build was originally broken, or by whom, or even if it ever worked in the first place. Build should be protected by the team that uses them and the only way to do that is to have them own them. It is fine for me to go in and setup a build, but the ownership for a build should always reside with the person who broke it last. Conclusion This is an example of a pointless build. Lets be honest, if you have a system like TFS in place and builds are constantly left broken, or not added to projects then your developers don’t yet understand the value. I have found that adding a Gated Check-in helps instil that understanding of value. If you prevent them from checking in without passing that basic quality gate of “your code builds on another computer” then it makes them look more closely at why they can’t check-in. I have had builds fail because one developer had a “d” drive, but the build server did not. That is what they are there to catch.   If you want to know what builds to create and why I wrote a post on “Do you know the minimum builds to create on any branch?”   Technorati Tags: TFS2010,Gated Check-in,Builds,Build Failure,Broken Build

  Read the article

• GlassFish Clustering with DCOM on Windows

  - by ByronNevins

  DCOM - Distributed COM, a Microsoft protocol for communicating with Windows machines. Why use DCOM? In GlassFish 3.1 SSH is used as the standard way to run commands on remote nodes for clustering.  It is very difficult for users to get SSH configured properly on Windows.  SSH does not come with Windows so we have to depend on third party tools.  And then the user is forced to install and configure these tools -- which can be tricky. DCOM is available on all supported platforms.  It is built-in to Windows. The idea is to use DCOM to communicate with remote Windows nodes.  This has the huge advantage that the user has to do minimal, if any, configuration on the Windows nodes. Implementation HighlightsTwo open Source Libraries have been added to GlassFish: Jcifs – a SAMBA implementation in Java J-interop – A Java implementation for making DCOM calls to remote Windows computers.   Note that any supported platform can use DCOM to work with Windows nodes -- not just Windows.E.g. you can have a Linux DAS work with Windows remote instances.All existing SSH commands now have a corresponding DCOM command – except for setup-ssh which isn’t needed for DCOM.  validate-dcom is an all new command. New DCOM Commands create-node-dcom delete-node-dcom install-node-dcom list-nodes-dcom ping-node-dcom uninstall-node-dcom update-node-dcom validate-dcom setup-local-dcom (This is only available via Update Center for GlassFish 3.1.2) These commands are in-place in the trunk (4.0).  And in the branch (3.1.2) Windows Configuration Challenges There are an infinite number of possible configurations of Windows if you look at it as a combination of main release, service-pack, special drivers, software, configuration etc.  Later versions of Windows err on the side of tightening security be default.  This means that the Windows host may need to have configuration changes made.These configuration changes mostly need to be made by the user.  setup-local-dcom will assist you in making required changes to the Windows Registry.  See the reference blogs for details. The validate-dcom Command validate-dcom is a crucial command.  It should be run before any other commands.  If it does not run successfully then there is no point in running other commands.The validate-dcom command must be used from a DAS machine to test a different Windows machine.  If  validate-dcom runs successfully you can be confident that all the DCOM commands will work.  Conversely, the opposite is also true:  If validate-dcom fails, then no DCOM commands will work. What validate-dcom does Verify that the remote host is not the local machine. Resolves the remote host name Checks that the remote DCOM port is being listened on (135, 139) Checks that the remote host’s File Sharing is enabled (port 445) It copies a file (a script) to the remote host to verify that SAMBA is working and authorization is correct It runs a script that it copied on-the-fly to the remote host. Tips and Tricks The bread and butter commands that use DCOM are existing commands like create-instance, start-instance etc.   All of the commands that have dcom in their name are for dealing with the actual nodes. The way the software works is to call asadmin.bat on the remote machine and run a command.  This means that you can track these commands easily on the remote machine with the usual tools.  E.g. using AS_LOGFILE, looking at log files, etc.  It’s easy to attach a debugger to the remote asadmin process, “just in time”, if necessary. How to debug the remote commands:Edit the asadmin.bat file that is in the glassfish/bin folder.  Use glassfish/lib/nadmin.bat in GlassFish 4.0+Add these options to the java call:-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=1234  Now if you run, say start-instance on DAS, you can attach your debugger, at your leisure, to the remote machines port 1234.  It will be running start-local-instance and patiently waiting for you to attach.

  Read the article

• The illusion of Competence

  - by tony_lombardo

  Working as a contractor opened my eyes to the developer food chain.  Even though I had similar experiences earlier in my career, the challenges seemed much more vivid this time through.  I thought I’d share a couple of experiences with you, and the lessons that can be taken from them. Lesson 1: Beware of the “funnel” guy.  The funnel guy is the one who wants you to funnel all thoughts, ideas and code changes through him.  He may say it’s because he wants to avoid conflicts in source control, but the real reason is likely that he wants to hide your contributions.  Here’s an example.  When I finally got access to the code on one of my projects, I was told by the developer that I had to funnel all of my changes through him.  There were 4 of us coding on the project, but only 2 of us working on the UI.  The other 2 were working on a separate application, but part of the overall project.  So I figured, I’ll check it into SVN, he reviews and accepts then merges in.  Not even close.  I didn’t even have checkin rights to SVN, I had to email my changes to the developer so he could check those changes in.  Lesson 2: If you point out flaws in code to someone supposedly ‘higher’ than you in the developer chain, they’re going to get defensive.  My first task on this project was to review the code, familiarize myself with it.  So of course, that’s what I did.  And in familiarizing myself with it, I saw so many bad practices and code smells that I immediately started coming up with solutions to fix it.  Of course, when I reviewed these changes with the developer (guy who originally wrote the code), he smiled and nodded and said, we can’t make those changes now, it’s too destabilizing.  I recommended we create a new branch and start working on refactoring, but branching was a new concept for this guy and he was worried we would somehow break SVN. How about some concrete examples? I started out by recommending we remove NUnit dependency and tests from the application project, and create a separate Unit testing project.  This was met with a little bit of resistance because - “How do I access the private methods?”  As it turned out there weren’t really any private methods that weren’t exposed by public methods, so I quickly calmed this fear. Win 1 Loss 0 Next, I recommended that all of the File IO access be wrapped in Using clauses, or at least properly wrapped in try catch finally.  This recommendation was accepted.. but never implemented. Win 2  Loss 1 Next recommendation was to refactor the command pattern implementation.  The command pattern was implemented, but it wasn’t really necessary for the application.  More over, the fact that we had 100 different command classes, each with it’s own specific command parameters class, made maintenance a huge hassle.  The same code repeated over and over and over.  This recommendation was declined, the code was too fragile and this change would destabilize it.  I couldn’t disagree, though it was the commands themselves in many cases that were fragile. Win 2 Loss 2 Next recommendation was to aid performance (and responsiveness) of the application by using asynchronous service calls.  This on was accepted. Win 2 Loss 3 If you’re paying any attention, you’re wondering why the async service calls was scored as a loss.. Let me explain.  The service call was made using the async pattern.  Followed by a thread.sleep  <facepalm>. Now it’s easy to be harsh on this kind of code, especially if you’re an experienced developer.  But I understood how most of this happened.  One junior guy, working as hard as he can to build his first real world application, with little or no guidance from anyone else.  He had his pattern book and theory of programming to help him, but no real world experience.  He didn’t know how difficult it would be to trace the crashes to the coding issues above, but he will one day.  The part that amazed me was the management position that “this guy should be a team lead, because he’s worked so hard”.  I’m all for rewarding hard work, but when you reward someone by promoting them past the point of their competence, you’re setting yourself and them up for failure.  And that’s lesson 3.  Just because you’ve got a hard worker, doesn’t mean he should be leading a development project.  If you’re a junior guy busting your ass, keep at it.  I encourage you to try new things, but most importantly to learn from your mistakes.  And correct your mistakes.  And if someone else looks at your code and shows you a laundry list of things that should be done differently, don’t take it personally – they’re really trying to help you.  And if you’re a senior guy, working with a junior guy, it’s your duty to point out the flaws in the code.  Even if it does make you the bad guy.  And while I’ve used “guy” above, I mean both men and women.  And in some cases mutant dinosaurs. 

  Read the article

• College Courses through distance learning

  - by Matt

  I realize this isn't really a programming question, but didn't really know where to post this in the stackexchange and because I am a computer science major i thought id ask here. This is pretty unique to the programmer community since my degree is about 95% programming. I have 1 semester left, but i work full time. I would like to finish up in December, but to make things easier i like to take online classes whenever I can. So, my question is does anyone know of any colleges that offer distance learning courses for computer science? I have been searching around and found a few potential classes, but not sure yet. I would like to gather some classes and see what i can get approval for. Class I need: Only need one C SC 437 Geometric Algorithms C SC 445 Algorithms C SC 473 Automata Only need one C SC 452 Operating Systems C SC 453 Compilers/Systems Software While i only need of each of the above courses i still need to take two more electives. These also have to be upper 400 level classes. So i can take multiple in each category. Some other classes I can take are: CSC 447 - Green Computing CSC 425 - Computer Networking CSC 460 - Database Design CSC 466 - Computer Security I hoping to take one or two of these courses over the summer. If not, then online over the regular semester would be ok too. Any help in helping find these classes would be awesome. Maybe you went to a college that offered distance learning. Some of these classes may be considered to be graduate courses too. Descriptions are listed below if you need. Thanks! Descriptions Computer Security This is an introductory course covering the fundamentals of computer security. In particular, the course will cover basic concepts of computer security such as threat models and security policies, and will show how these concepts apply to specific areas such as communication security, software security, operating systems security, network security, web security, and hardware-based security. Computer Networking Theory and practice of computer networks, emphasizing the principles underlying the design of network software and the role of the communications system in distributed computing. Topics include routing, flow and congestion control, end-to-end protocols, and multicast. Database Design Functions of a database system. Data modeling and logical database design. Query languages and query optimization. Efficient data storage and access. Database access through standalone and web applications. Green Computing This course covers fundamental principles of energy management faced by designers of hardware, operating systems, and data centers. We will explore basic energy management option in individual components such as CPUs, network interfaces, hard drives, memory. We will further present the energy management policies at the operating system level that consider performance vs. energy saving tradeoffs. Finally we will consider large scale data centers where energy management is done at multiple layers from individual components in the system to shutting down entries subset of machines. We will also discuss energy generation and delivery and well as cooling issues in large data centers. Compilers/Systems Software Basic concepts of compilation and related systems software. Topics include lexical analysis, parsing, semantic analysis, code generation; assemblers, loaders, linkers; debuggers. Operating Systems Concepts of modern operating systems; concurrent processes; process synchronization and communication; resource allocation; kernels; deadlock; memory management; file systems. Algorithms Introduction to the design and analysis of algorithms: basic analysis techniques (asymptotics, sums, recurrences); basic design techniques (divide and conquer, dynamic programming, greedy, amortization); acquiring an algorithm repertoire (sorting, median finding, strong components, spanning trees, shortest paths, maximum flow, string matching); and handling intractability (approximation algorithms, branch and bound). Automata Introduction to models of computation (finite automata, pushdown automata, Turing machines), representations of languages (regular expressions, context-free grammars), and the basic hierarchy of languages (regular, context-free, decidable, and undecidable languages). Geometric Algorithms The study of algorithms for geometric objects, using a computational geometry approach, with an emphasis on applications for graphics, VLSI, GIS, robotics, and sensor networks. Topics may include the representation and overlaying of maps, finding nearest neighbors, solving linear programming problems, and searching geometric databases.

  Read the article

• Blog Buzz - Devoxx 2011

  - by Janice J. Heiss

  Some day I will make it to Devoxx – for now, I’m content to vicariously follow the blogs of attendees and pick up on what’s happening.  I’ve been doing more blog "fishing," looking for the best commentary on 2011 Devoxx. There’s plenty of food for thought – and the ideas are not half-baked.The bloggers are out in full, offering useful summaries and commentary on Devoxx goings-on.Constantin Partac, a Java developer and a member of Transylvania JUG, a community from Cluj-Napoca/Romania, offers an excellent summary of the Devoxx keynotes. Here’s a sample:“Oracle Opening Keynote and JDK 7, 8, and 9 Presentation•    Oracle is committed to Java and wants to provide support for it on any device.•    JSE 7 for Mac will be released next week.•    Oracle would like Java developers to be involved in JCP, to adopt a JSR and to attend local JUG meetings.•    JEE 7 will be released next year.•    JEE 7 is focused on cloud integration, some of the features are already implemented in glassfish 4 development branch.•    JSE 8 will be release in summer of 2013 due to “enterprise community request” as they can not keep the pace with an 18    month release cycle.•    The main features included in JSE8 are lambda support, project Jigsaw, new Date/Time API, project Coin++ and adding   support for sensors. JSE 9 probably will focus on some of these features:1.    self tuning JVM2.    improved native language integration3.    processing enhancement for big data4.    reification (adding runtime class type info for generic types)5.    unification of primitive and corresponding object classes6.    meta-object protocol in order to use type and methods define in other JVM languages7.    multi-tenancy8.    JVM resource management” Thanks Constantin! Ivan St. Ivanov, of SAP Labs Bulgaria, also commented on the keynotes with a different focus.  He summarizes Henrik Stahl’s look ahead to Java SE 8 and JavaFX 3.0; Cameron Purdy on Java EE and the cloud; celebrated Java Champion Josh Bloch on what’s good and bad about Java; Mark Reinhold’s quick look ahead to Java SE 9; and Brian Goetz on lambdas and default methods in Java SE 8. Here’s St. Ivanov’s account of Josh Bloch’s comments on the pluses of Java:“He started with the virtues of the platform. To name a few:    Tightly specified language primitives and evaluation order – int is always 32 bits and operations are executed always from left  to right, without compilers messing around    Dynamic linking – when you change a class, you need to recompile and rebuild just the jar that has it and not the whole application    Syntax  similarity with C/C++ – most existing developers at that time felt like at home    Object orientations – it was cool at that time as well as functional programming is today    It was statically typed language – helps in faster runtime, better IDE support, etc.    No operator overloading – well, I’m not sure why it is good. Scala has it for example and that’s why it is far better for defining DSLs. But I will not argue with Josh.”It’s worth checking out St. Ivanov’s summary of Bloch’s views on what’s not so great about Java as well. What's Coming in JAX-RS 2.0Marek Potociar, Principal Software Engineer at Oracle and currently specification lead of Java EE RESTful web services API (JAX-RS), blogged on his talk about what's coming in JAX-RS 2.0, scheduled for final release in mid-2012.  Here’s a taste:“Perhaps the most wanted addition to the JAX-RS is the Client API, that would complete the JAX-RS story, that is currently server-side only. In JAX-RS 2.0 we are adding a completely interface-based and fluent client API that blends nicely in with the existing fluent response builder pattern on the server-side. When we started with the client API, the first proposal contained around 30 classes. Thanks to the feedback from our Expert Group we managed to reduce the number of API classes to 14 (2 of them being exceptions)! The resulting is compact while at the same time we still managed to create an API that reflects the method invocation context flow (e.g. once you decide on the target URI and start setting headers on the request, your IDE will not try to offer you a URI setter in the code completion). This is a subtle but very important usability aspect of an API…” Obviously, Devoxx is a great Java conference, one that is hitting this year at a time when much is brewing in the platform and beginning to be anticipated.

  Read the article

• Adaptive Layout for ADF Faces on Tablets

  - by Shay Shmeltzer

  In the 11.1.16 version of Oracle ADF we started adding specific features to the ADF Faces components so they'll work better on iPad tablets. In this entry I'm going to highlight some new capabilities that we have added to the 11.1.2.3 release. (note if you are still on the 11.1.1.* branch - you'll need to wait for 11.1.1.7 to get the features discussed here). The two key additions in the 11.1.2.3 version compared to the 11.1.1.6 features for iPad support include: pagination for tables and adaptive flow layout. The pagination for table is self explanatory, basically since iPad don't support scroll bars, we automatically switch the table component to render with a pagination toolbar that allow you to scroll set of records or directly jump to a specific set. See the image below. The adaptive flow layout takes a bit more explanation. On regular desktops the UI that you usually build for ADF Faces screens is going to use stretch layout - meaning that it stretches to fill the whole area of the browser window. If you resize the browser windoe, the ADF Faces page resizes with it. If your browser window is too small, scroll bars will appear to allow you to scroll to areas that are "hidden". However on an iPad, this is probably not the type of layout you want - you would rather have a flow layout that eliminates scroll bars and instead allows you to scroll down the page. Basically your want the page to be sized based on its content, rather then based on the browser window size. In ADF Faces terminology this can be done with the dimensionsFrom property set to "children". And here comes the tricky part, since in the past(and also today) when you create an ADF Faces page and add a stretchable component to it, the dimensionsFrom property is set to parent by default. This will be true to other layout components you'll add as well. At this point you might be wondering "Does this mean I'll need to go to each of the layout components in my page and modify the dimensionsFrom property value to be children?" ADF Faces to the rescue... To eliminate the need to do this tedious manual changes, we introduced a new web.xml parameter "oracle.adf.view.rich.geometry.DEFAULT_DIMENSIONS" You'll basically add the following to your web.xml <context-param>    <description>      This parameter controls the default value for component geometry on the page.      Supported values are:        legacy - component attributes use the default values as specified for the attributes                 in the tag documentation (default value)        auto   - component attributes use the correct default value given the value of their                 parent component. For example, with this setting, the panelStretchLayout                 will use "auto" as the default value for its "dimensionsFrom" attribute                 instead of "parent".    </description>    <param-name>oracle.adf.view.rich.geometry.DEFAULT_DIMENSIONS</param-name>    <param-value>auto</param-value>  </context-param> Once you set this parameter, you only need to set the dimensionsFrom attribute for the top level layout component on your page, and the rest of the components will adjust accordingly. One trick that you can use, and that is used in the demo below, is to have the dimensionsFrom property depend on the type of client that access your application. This way you can switch between stretch or flow layout based on the device accessing your application. For example I use the following in my page: <af:panelStretchLayout topHeight="70px" startWidth="0px" endWidth="0px"                                       dimensionsFrom="#{adfFacesContext.agent.capabilities['touchScreen'] eq 'none'  ? 'parent' : 'children' }"> Which results in a flow layout for iPads and a stretch layout for regular browsers. Check out the result in the below demo: &amp;lt;span id=&amp;quot;XinhaEditingPostion&amp;quot;&amp;gt;&amp;lt;/span&amp;gt;

  Read the article

• Some Early Considerations

  - by Chris Massey

  Following on from my previous post, I want to say "thank you" to everyone who has got in touch and got involved – you are pioneers! An update on where we are right now: paper prototypes v1 To be more specific, we’ve picked two of the ideas that seem to have more pros than cons, turned them into Balsamiq mockups, and are getting them fleshed out with realistic content. We’ll initially make these available to the aforementioned pioneers (thank you again), roll in the feedback, and then open up to get more data on what works and what doesn’t. If you’ve got any questions about this (or what we’re working on right now), feel free to ask me in the comments below. I’ve had a few people express an interest in the process we’re going through, and I’m more than happy to share details more frequently as we go along – not least because you, dear reader, will help us stay on target and create something Good. To start with, here’s a quick flashback to bring you all up to speed. A Brief Retrospective As you may already know, we’re creating a new publishing asset specifically focused on providing great content for web developers. We don’t yet know exactly what this thing will look like, or exactly how it will work, but we know we want to create something that is useful different. For my part, I’m seriously excited at the prospect of building a genuinely digital publishing system (as opposed to what most publishing is these days, which is print-style publishing which just happens to be on the web). The main challenge at this point is working out our build-measure-assess loop to speed up our experimental turn-around, and that’ll get better as we run more trials. Of course, there are a few things we’ve been pondering at this early conceptual stage: Do we publishing about heterogeneous technology stacks from day 1, or do we start with ASP.NET (which we’re familiar with) & branch out later? There are challenges with either approach. What publishing "modes" are already being well-handled? For example, the likes of Pluralsight, TekPub, and Treehouse have pretty much nailed video training (debate about price, if you like), and unless we think we can do it faster / better / cheaper (unlikely, for the record), we should leave them to it. Where should we base whatever we create? Should we create a completely new asset under a new name, graft something onto Simple-Talk (like the labs), or just build something directly into Simple-Talk? It sounds trivial, but it does have at least some impact on infrastructure and what how we manage the different types of content we (will) have. Are there any obvious problems or niches that we think could address really well, or should we just throw ideas out and see what readers respond to? What kind of users do we want to provide for? This actually deserves a little bit of unpacking… Why are you here? We currently divide readers into (broadly) the categories: Category 1: I know nothing about X, and I’d like to learn about it. Category 2: I know something about X, but I’d like to learn how to do something specific with it. Category 3: Ah man, I have a problem with X, and I need to fix it now. Now that I think about it, I might also include a 4th class of reader: Category 4: I’m looking for something interesting to engage my brain. These are clearly task-based categorizations, and depending on which task you’re performing when you arrive here, you’re going to need different types of content, or will have specific discovery needs. One of the questions that’s at the back of my mind whenever I consider a new idea is “How many of the categories will this satisfy?” As an example, typical video training is very well suited to categories 1, 2, and 4. StackOverflow is very well suited to category 3, and serves as a sign-posting system to the rest. Clearly it’s not necessary to satisfy every category need to be useful and popular, but being aware of what behavior readers might be exhibiting when they arrive will help us tune our ideas appropriately. < / Flashback > We don’t have clean answers to most of these considerations – they’re things we’re aware of, and each idea we look at is going to be best suited to a different mix of the options I’ve described. Our first experimental loop will be coming full circle in the next few days, so we should start to see how the different possibilities vary between ideas. Free to chime in with questions and suggestions about anything I’ve just brain-dumped, or at any stage as we go along. If you see anything that intrigued or enrages you, or just have an idea you’d like to share, I’d love to hear from you.

  Read the article

• Solaris 11.1 changes building of code past the point of __NORETURN

  - by alanc

  While Solaris 11.1 was under development, we started seeing some errors in the builds of the upstream X.Org git master sources, such as: "Display.c", line 65: Function has no return statement : x_io_error_handler "hostx.c", line 341: Function has no return statement : x_io_error_handler from functions that were defined to match a specific callback definition that declared them as returning an int if they did return, but these were calling exit() instead of returning so hadn't listed a return value. These had been generating warnings for years which we'd been ignoring, but X.Org has made enough progress in cleaning up code for compiler warnings and static analysis issues lately, that the community turned up the default error levels, including the gcc flag -Werror=return-type and the equivalent Solaris Studio cc flags -v -errwarn=E_FUNC_HAS_NO_RETURN_STMT, so now these became errors that stopped the build. Yet on Solaris, gcc built this code fine, while Studio errored out. Investigation showed this was due to the Solaris headers, which during Solaris 10 development added a number of annotations to the headers when gcc was being used for the amd64 kernel bringup before the Studio amd64 port was ready. Since Studio did not support the inline form of these annotations at the time, but instead used #pragma for them, the definitions were only present for gcc. To resolve this, I fixed both sides of the problem, so that it would work for building new X.Org sources on older Solaris releases or with older Studio compilers, as well as fixing the general problem before it broke more software building on Solaris. To the X.Org sources, I added the traditional Studio #pragma does_not_return to recognize that functions like exit() don't ever return, in patches such as this Xserver patch. Adding a dummy return statement was ruled out as that introduced unreachable code errors from compilers and analyzers that correctly realized you couldn't reach that code after a return statement. And on the Solaris 11.1 side, I updated the annotation definitions in <sys/ccompile.h> to enable for Studio 12.0 and later compilers the annotations already existing in a number of system headers for functions like exit() and abort(). If you look in that file you'll see the annotations we currently use, though the forms there haven't gone through review to become a Committed interface, so may change in the future. Actually getting this integrated into Solaris though took a bit more work than just editing one header file. Our ELF binary build comparison tool, wsdiff, actually showed a large number of differences in the resulting binaries due to the compiler using this information for branch prediction, code path analysis, and other possible optimizations, so after comparing enough of the disassembly output to be comfortable with the changes, we also made sure to get this in early enough in the release cycle so that it would get plenty of test exposure before the release. It also required updating quite a bit of code to avoid introducing new lint or compiler warnings or errors, and people building applications on top of Solaris 11.1 and later may need to make similar changes if they want to keep their build logs similarly clean. Previously, if you had a function that was declared with a non-void return type, lint and cc would warn if you didn't return a value, even if you called a function like exit() or panic() that ended execution. For instance: #include <stdlib.h> int callback(int status) { if (status == 0) return status; exit(status); } would previously require a never executed return 0; after the exit() to avoid lint warning "function falls off bottom without returning value". Now the compiler & lint will both issue "statement not reached" warnings for a return 0; after the final exit(), allowing (or in some cases, requiring) it to be removed. However, if there is no return statement anywhere in the function, lint will warn that you've declared a function returning a value that never does so, suggesting you can declare it as void. Unfortunately, if your function signature is required to match a certain form, such as in a callback, you not be able to do so, and will need to add a /* LINTED */ to the end of the function. If you need your code to build on both a newer and an older release, then you will either need to #ifdef these unreachable statements, or, to keep your sources common across releases, add to your sources the corresponding #pragma recognized by both current and older compiler versions, such as: #pragma does_not_return(exit) #pragma does_not_return(panic) Hopefully this little extra work is paid for by the compilers & code analyzers being able to better understand your code paths, giving you better optimizations and more accurate errors & warning messages.

  Read the article

• SPARC T4 ??????: SPARC T4 ??????????!!

  - by user13138700

  ?? 2011 ? 9 ?? SPARC T4 CPU ???????? SPARC T4 ????????????????2011??10?????????????????????????? ????????????????????SPARC T4 ?????????????????????????????????????????????????????????? SPARC T4 CPU ???? SPARC T4 ?????????????????????????????????? ??????????????????????4/4, 4/5, 4/6 ? 3???????? Oracle Open World 2012 ???????? Oracle Open World 2012 Tokyo ?? Oracle ?????&????? ??? Oracle Solaris ????????????·????????? SPARC&Solaris ??????????????SPARC&Solaris ????????????????????????????????????????????????????????????????????????? Oracle OpenWorld Tokyo 2012 ???? URL http://www.oracle.com/openworld/jp-ja/index.html ?????? 7264 ??????????????? ????Oracle Open World 2012 Tokyo ?????????????????????????SPARC T4 ????? ????????????????? SPARC T4 ????????? SPARC T3 ????????(S2??)??????????????????????????(S3??)??????????????????? ???????" T " ???????????????(?)?????? SPARC T1/T2/T3 ???????????????????????????(????????)????????????????????????? ?SPARC T4 ????????????????????????????? ?SPARC T4 ???????DB?????????????????????????????? ???????????????? ????????????????????????????????????????????? ???? SPARC T3 ???????????????????????????2???????????? ????????????????????????????????????????????????????? ?????????????? SPARC T4 ????????????????????????????????????SPARC T4 ????????? SPARC T4 ??????????????????????????????????????????? ?????????????? T4 ??????????????????? SPARC ???????????????????????????????????????????????????????????????????&??????????? ?????????????????????????????????????????????????????????Web?????????????DB?????????????????????????????????????? (????????????) ???????????? SPARC T4 ????????????????????????????? < T4 ???????? > ??? SPARC ??(S3??)??? x5??????????????????? x2????????????????????? Crypto (?????)?????????? ?????????????????????????/???????????????? ?????? 1, 2,& 4 ??????????? < T4 ????? ??????? > 8x SPARC S3 ?? (64????/???) 4MB ?? L3 ????? (8???/16???) 8x9 ????? 4x DDR3 ??????????? @6.4Gbps 6x ?????????? @9.6Gbps 2x8 PCIe 2.0 (5GTS) 2x10Gb XAUI ??????? < S3???????????? > ALU : Arithmetic Logic Unit BRU : Branch Logic Unit FGU : Flouting-point Graphics Unit IRF : Integer Register File FRF : Flouting-point Register File WRF : Working Register File MMU : Memory Management Unit LSU : Load Store Unit Crypto(SPU) : Streaming Processing Unit TRU : Trap Logic Unit < S3????????? > ????? 8????/?? ?????? Out-of-Order ?? 16???????????????? ????????????? ???????????? ??????? ????????? 64???? ITLB ? 128???? DTLB 64KB 4??? L1 ?????????????? 128KB 8??? ???? L2 ????? < T4 ???????? vs T3 ???????? > T4 ????????????? Out-Of-Order ???? Pick ???????? In-Order ?? Pick ?????? Commit ??????? Out-Of-Order ?? Commit ?????? In-Order ?? < T4 ?????????? > ???????????vs????????????????????????????? ????????Active??????????????????? ???????????????????????? ??????????????????? < T4vsT1/T2/T3 ??????? > SPARC T4 ???? T3????????Web??????????? DB?????????????????????????????? ????????????????????SPARC T4 ?????&Solaris ?????????????(????????)??????????????????????????????????????????????????????????!!? ????Oracle Open World 2012 Tokyo ????????????????SPARC T4 ?????????????????????? 4/4, 4/5, 4/6 ?3????????????????????????????????????????????????????????????????????????????????????? ????????????????? URL http://www.oracle.com/openworld/jp-ja/exhibit/index.html

  Read the article

• How can I define a clojure type that implements the servlet interface?

  - by Rob Lachlan

  I'm attempting to use deftype (from the bleeding-edge clojure 1.2 branch) to create a java class that implements the java Servlet interface. I would expect the code below to compile (even though it's not very useful). (ns foo [:import [javax.servlet Servlet ServletRequest ServletResponse]]) (deftype servlet [] javax.servlet.Servlet (service [this #^javax.servlet.ServletRequest request #^javax.servlet.ServletResponse response] nil)) But it doesn't compile. The compiler produces the message: Mismatched return type: service, expected: void, had: java.lang.Object [Thrown class java.lang.IllegalArgumentException] Which doesn't make sense to me, because I'm returning nil. So the fact that the return type of the method is void shouldn't be a problem. For instance, for the java.util.Set interface: (deftype bar [#^Number n] java.util.Set (clear [this] nil)) compiles without issue. So what am I doing wrong with the Servlet interface? To be clear: I know that the typical case is to subclass one of the servlet abstract classes rather than implement this interface directly, but it should still be possible to do this. Stack Trace: The stack trace for the (deftype servlet... is: Mismatched return type: service, expected: void, had: java.lang.Object [Thrown class java.lang.IllegalArgumentException] Restarts: 0: [ABORT] Return to SLIME's top level. Backtrace: 0: clojure.lang.Compiler$NewInstanceMethod.parse(Compiler.java:6461) 1: clojure.lang.Compiler$NewInstanceExpr.build(Compiler.java:6119) 2: clojure.lang.Compiler$NewInstanceExpr$DeftypeParser.parse(Compiler.java:6003) 3: clojure.lang.Compiler.analyzeSeq(Compiler.java:5289) 4: clojure.lang.Compiler.analyze(Compiler.java:5110) 5: clojure.lang.Compiler.analyze(Compiler.java:5071) 6: clojure.lang.Compiler.eval(Compiler.java:5347) 7: clojure.lang.Compiler.eval(Compiler.java:5334) 8: clojure.lang.Compiler.eval(Compiler.java:5311) 9: clojure.core$eval__4350.invoke(core.clj:2364) 10: swank.commands.basic$eval_region__673.invoke(basic.clj:40) 11: swank.commands.basic$eval_region__673.invoke(basic.clj:31) 12: swank.commands.basic$eval__686$listener_eval__687.invoke(basic.clj:54) 13: clojure.lang.Var.invoke(Var.java:365) 14: foo$eval__2285.invoke(NO_SOURCE_FILE) 15: clojure.lang.Compiler.eval(Compiler.java:5343) 16: clojure.lang.Compiler.eval(Compiler.java:5311) 17: clojure.core$eval__4350.invoke(core.clj:2364) 18: swank.core$eval_in_emacs_package__320.invoke(core.clj:59) 19: swank.core$eval_for_emacs__383.invoke(core.clj:128) 20: clojure.lang.Var.invoke(Var.java:373) 21: clojure.lang.AFn.applyToHelper(AFn.java:169) 22: clojure.lang.Var.applyTo(Var.java:482) 23: clojure.core$apply__3776.invoke(core.clj:535) 24: swank.core$eval_from_control__322.invoke(core.clj:66) 25: swank.core$eval_loop__324.invoke(core.clj:71) 26: swank.core$spawn_repl_thread__434$fn__464$fn__465.invoke(core.clj:183) 27: clojure.lang.AFn.applyToHelper(AFn.java:159) 28: clojure.lang.AFn.applyTo(AFn.java:151) 29: clojure.core$apply__3776.invoke(core.clj:535) 30: swank.core$spawn_repl_thread__434$fn__464.doInvoke(core.clj:180) 31: clojure.lang.RestFn.invoke(RestFn.java:398) 32: clojure.lang.AFn.run(AFn.java:24) 33: java.lang.Thread.run(Thread.java:637)

  Read the article

• When -exactly- does the Rails3 application get initialized?

  - by bergyman

  I've been fighting left and right with rails 3 and bundler. There are a few gems out there that don't work properly if the rails application hasn't been loaded yet. factory_girl and shoulda are both examples, even on the rails3 branch. Taking shoulda as an example, when trying to run rake test:units I get the following error: DEPRECATION WARNING: RAILS_ROOT is deprecated! Use Rails.root instead. (called from autoload_macros at c:/code/test_harness/vendor/windows_gems/gems/shoulda-2.10.3/lib/shoulda/autoload_macros.rb:40) c:/code/test_harness/vendor/windows_gems/gems/shoulda-2.10.3/lib/shoulda/autoload_macros.rb:44:in 'join': can't convert #<Class:0x232b7c0> into String (TypeError) from c:/code/test_harness/vendor/windows_gems/gems/shoulda-2.10.3/lib/shoulda/autoload_macros.rb:44:in 'block in autoload_macros' from c:/code/test_harness/vendor/windows_gems/gems/shoulda-2.10.3/lib/shoulda/autoload_macros.rb:44:in 'map' from c:/code/test_harness/vendor/windows_gems/gems/shoulda-2.10.3/lib/shoulda/autoload_macros.rb:44:in 'autoload_macros' from c:/code/test_harness/vendor/windows_gems/gems/shoulda-2.10.3/lib/shoulda/rails.rb:17:in '<top (required)>' Digging a bit deeper into lib/shoulda/rails, I see this: root = if defined?(Rails.root) && Rails.root Rails.root else RAILS_ROOT end # load in the 3rd party macros from vendorized plugins and gems Shoulda.autoload_macros root, File.join("vendor", "{plugins,gems}", "*") So...what's happening here is while Rails.root is defined, Rails.root == nil, so RAILS_ROOT is used, and RAILS_ROOT==nil, which is then being passed on to Shoulda.autoload_macros. Obviously the rails app has yet to be initialized. With Rails3 using Bundler now, there's been some hubub over on the Bundler side about being able to specify an order in which the gems are required, but I'm not sure whether or not this would solve the problem at hand. Ultimately my questions is this: When exactly does the environment.rb file (which actually initializes the application) get pulled in? Is there any harm to bumping up when the app is initialized and have it happen before the Bundler.require line in config/application.rb? I've tried to hack bundler to specify the order myself, and have the rails gem pulled in first, but it doesn't appear to me that requiring the rails gem actually initializes the application. As this line (in config/application.rb) is being called before the app is initialized, any gem in the bundler Gemfile that requires rails to be initialized is going to tank. # Auto-require default libraries and those for the current Rails environment. Bundler.require :default, Rails.env

  Read the article

• Which StackOverflow-style MarkDown (WMD) javascript editor should I use?

  - by Edan Maor

  Background I'm working on an application which requires user-entered content, and I've decided to use a StackOverflow-style MarkDown editor. After researching this topic for the last few days, I realize there are numerous forks of the base WMD editor, some with a few basic enhancements and some with serious differences from the StackOverflow one. Since this will be the heart of the application, I'd like to start with the best code base I can. I'd be happy if anyone can recommend which one of the many solutions out there best fits my needs. Below is requirements, plus what I've managed to find already. I'm hoping this question will help me decide which version to go with, and maybe help me discover a port out there that's an even better fit for my needs. The requirements for my project Live Preview Multiple editors on the same page (not know how many in advance, since the user can dynamically add another editing box). Ability to extend with extra buttons (I'd like a button to upload a picture, instead of just adding an img url). Ability to dynamically show/hide the edit box (and only see the preview box). Not an absolute must, but I'd prefer to stick as close to StackOverflow's look and feel, since it's well known. Don't know if this matters, but the backend is written in Django. Editors I've looked at Here are a few of the code bases I've looked at, with thoughts. Obviously, I might be missing another solution out there. The derobins version. From what I can tell, this is the official StackOverflow version. Seems like it doesn't support multiple editors on one page. JQuery.MarkEdit. Looks very good, but is pretty different from the StackOverflow version. MooWMD. Looks like the winner right now, but I'm a little concerned since it looks less active/hackable than MarkEdit. The wmd-new version. Not sure, looks like an old codebase without much use. The SocialSite branch. Seems like it's not for public use.

  Read the article

• Suggest the best options to me to design the dynamic web interface using PHP MYSQL and AJAX

  - by Krishna

  Hello, I am designing a web interface for a company. I am describing the company's profile: company is currently having 5 branches and planning to extend their branches all over the country. it is an insurance surveying company. they are dealing with 6 Categories in the insurance domain, vide .. Engineering Fire Marine Motor Miscellaneous Risk Inspection and branches named as b1, b2, b3, b4, b5 and Extending. and finally they have contract with 22 companies. For each claim they are assign a unique ID. like contractcompany/category/serialno Ex: take a contracted company names as xxx, sss, zzz. xxx/Engineering/001 sss/Engineering/001 . . . xxx/Enginnering/002 sss/Engineering/002 . . . xxx/Fire/001 sss/Fire/001 . . . xxx/Fire/002 . . . xxx/Fire/002 . . . and so on..... by this way they issue the unique ID for each claim. Finally what i want is developing the interface with PHP mysql and ajax auto generating the unique id for each claim. store full details of the claims with reference to unique id. show all claims in one page, and they can view by branch wise and category wise. send monthly Report (All claims they have given and status of claims) to contract companies. give access to contracted companies, but they can view only their respective claims. Each claim has its own documents. So they can be uploaded by own company users or administrator. these files are associated with unique ID. contracted companies can view files. Give access to branches to enter new claims and update old claims. Administrator can create, update and delete all the claims and their details. Only administrator can grant new users (own company branches / contracted companies) Finally the the panel is completely database driven. Could any body can help. Thanks in advance Kindly do the needful and oblige Thanks and Regards Krishna. P [email protected]

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65  | Next Page >