Search Results

Search found 3039 results on 122 pages for 'centos 5'.

Page 59/122 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• Limiting and redirect port access with useragent

  - by linuxcore

  I'm trying to write iptables string match rule To block http://domain.com:8888 and https://domain.com:8888 when it matches the supplied string in the rule. And another rule to redirect the ports also from 8888 to 7777 I tried following rules but unfortunately didn't work iptables -A INPUT -p tcp -s 0.0.0.0/0 -m string --string linuxcore --algo bm --sport 8888 -j DROP iptables -t raw -A PREROUTING -m string --algo bm --string linuxcore -p tcp -i eth0 --dport 8888 -j DROP iptables -t nat -A PREROUTING -p tcp --dport 8888 -m string --algo bm --string "linuxcore" -j REDIRECT --to-port 7777 iptables -A INPUT -t nat -p tcp --dport 8888 -m string --algo bm --string "linuxcore" -j DROP I want to do this from iptables not the webserver because the server may not have a webserver and those ports are working on internal proxy or something like ..etc

  Read the article

• How to view history of Yum commands (update, install, remove)?

  - by Chris

  I'm seeing some errors in my apache logs and they may (or may not) be related to some packages that I recently installed/removed using Yum. Is there a way to view the history of Yum packages that have been updated/installed/removed ? I could use the "history" command from unix, but some installations may have been done with different accounts. I've tried searching the web and reading the man page too but haven't found anything.

  Read the article

• squid bypass for a domain

  - by krisdigitx

  i am using squid with adzap, it possible that squid/adzap does not cache for a particluar domain eg. cnn.com this is my squid.conf file # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 #acl localhost src ::1/128 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 #acl to_localhost dst ::1/128 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 192.168.1.0/24 acl localnet src 192.168.2.0/24 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port xxx.xxx.xxx.yyy:3128 transparent visible_hostname proxyserver.local # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. cache_dir ufs /var/spool/squid 1024 16 256 # Leave coredumps in the first cache dir coredump_dir /var/spool/squid # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 access_log /var/log/squid/squid.log squid access_log syslog squid redirect_program /usr/local/adzap/scripts/wrapzap fixed using acl allow_domains dstdomain www.cnn.com always_direct allow allow_domains

  Read the article

• Set up Gmail with Google apps for own domain

  - by erdomester

  I rent a server from a German company. I have remote access to it as well as WHM and CPanel. I decided to use Google's mail servers for obvious reasons. I am not an admin just an average guy trying to set up what needs to be set up. The problem is I am unable to make the necessary settings. I watched Youtube tutorials, followed written ones as well as Google's help, but there is (at least) one serious problem with my domain settings. The domain console alwasy says Your MX records are incorrect When I check dappwall.com in mxtoolbox.com it says Pref Hostname IP Address TTL 10 mail.dappwall.com 46.4.88.247 24 hrs But this is not the host name. I checked WHM and my hostname is server1.dappwall.com. I can confirm it by typing the hostname command in putty. However, if I do an mx lookup at mxtoolbox.com on server1.dappwall.com or mail.dappwall.com I get Lookup failed after 1 name servers timed out or responded non-authoritatively I ran checks on the google apps toolbox on dappwall.com and two problems emerged: 1.No Google mail exchangers found. Relayhost configuration? 10 mail.dappwall.com In Google Apps > Settings for Gmail > Advanced settings it also says that my current MX records for dappwall.com is Priority Points to 10 MAIL.DAPPWALL.COM. So mail.dappwall.com again. I also have access to a robot provided by the company I rent the server from. Here I see this mail at two places but how should I (if it's necessary) modify this? I set Email routing to Automatically Detect Configuration. 2.There SHOULD be a valid SPF record. "v=spf1 include:_spf.google.com ~all" In the DNS Zone Editor I added this spf record: Name TTL Class Type Record dappwall.com. 1440 IN TXT v=spf1 include:_spf.google.com ~all In the cPanel Email Authentication page it says SPF: Status: Enabled Warning: cPanel is unable to verify that this server is an authoritative nameserver for dappwall.com. [?] Your current raw SPF record is : v=spf1 include:_spf.google.com ~all How can I confirm that my server is an authoritative nameserver for dappwall.com? In WHM Service Configuration Mailserver selection Dovecot was set but I disabled it (i don't know if that's ok). What am I missing here? Where is that mail.dappwall.com coming from?

  Read the article

• Eliminate default SSL certificate

  - by microchasm

  I'm setting up a server for local access. I created a CA and have SSL certs signed and working on other domains. The problem is I'm trying to create a cert for a domain name that is the same as the host name? I copied the steps to make the cert for the other domain, but when I create and sign this cert, and modify httpd.conf with the path to the cert and key, the localhost.localdomain cert seems to be taking precedence. In other words, when I view the cert in firefox, it is the localhost.localdomain cert instead of the one I just created. I looked at ssl.conf, and tried to change the default path to the one issued, and I tried to comment out the VirtualHost, but neither worked. How can I override the servers default certificate with the one I issued and signed? Thanks.

  Read the article

• Does changing web hosts (changing a domain's nameservers) affect the private nameservers / glue records created under that domain?

  - by Kris

  We currently have a virtual dedicated server with GoDaddy and have 4 domains under it. I ended up creating private nameservers under, say mydomain_a.com, and have ns1.mydomain_a.com and ns2.mydomain_a.com as the nameservers for the other 3 domains. Now, we're thinking of switching web hosts (not domain registrar just the host) which means I have to change mydomain_a.com's nameservers to the new host. Will that affect or mess with the other 3 domains still pointing to ns1.mydomain_a.com and ns2.mydomain_a.com? Will that affect the private nameservers / glue records in anyway? Currently: domain: mydomain_a.com nameservers (GoDaddy): ns1.mydomain_a.com ns2.mydomain_a.com domain: mydomain_b.com nameservers (GoDaddy): ns1.mydomain_a.com ns2.mydomain_a.com After the Change: domain: mydomain_a.com nameservers (Other Host): ns1.some_other_host_ns.com ns2.some_other_host_ns.com This is my Question, Would this be affected? domain: mydomain_b.com nameservers (GoDaddy): ns1.mydomain_a.com ns2.mydomain_a.com

  Read the article

• Error on error log

  - by Ryan Murphy

  I am trying to use zend framework 2, i follow these instructions on centos6 via ssh. http://framework.zend.com/manual/2.0/en/user-guide/skeleton-application.html and when trying to start my website up, it gives an error, i go to the error log and i get this. [Sun Jun 30 16:02:17 2013] [error] [client 109.217.190.75] SoftException in Application.cpp:357: UID of script "/home/mydomain/public_html/public/index.php" is smaller than min_uid [Sun Jun 30 16:02:17 2013] [error] [client 109.217.190.75] Premature end of script headers: index.php What do they mean, how I fix them?

  Read the article

• Testing DNS configuration of domain by using hosts file?

  - by Alex Blundell

  I'm currently migrating a website to another server, and want to test the DNS configuration (more specifically, email mx records) before moving the domain over. I've configured the DNS on the new server to have mx entries for Google Apps in the same way that it's configured on the old server. The domain is controlled by nameservers on the old server at the moment, so the change would simply be updating the nameservers to the new servers. (What I'm getting at is DNS is controlled at the server level, not registrar level). Since the website has quite a number of users, I want to make sure the configuration is right before flicking the switch. For this, can I add an entry to the hosts file of my local computer to point the domain to the new server? I've done this, and the web server works, but would this also test the email mx records on the new server?

  Read the article

• How to show a warning message when entering a folder?

  - by Valter Henrique

  I don't know if this is possible, but, I have a folder which I would like to show some warning message when the user enters in it. In my case would say that the folder could be deleted without previous warning to save some disk space. I already create a file inside the folder with the warning message: WARNING! ########################################################################################################################################################## Please, be advised, that the folder /company-backup/amazon-s3 can be deleted without previous WARNING to save disk space as the INFRASTRUCTURE TEAM judge necessary. Best regards, Infrastructure Team. ########################################################################################################################################################### Is that possible ? Any idea ?

  Read the article

• nginx giving 404 when accessing php from alias directory

  - by code90

  I am trying to migrate from apache to nginx. The php sites that I am hosting need to access a shared library which turns out to be an alias directory. Below is the configuration I came up with. html files work fine, but php files giving 404. I have read through and tried most (if not all) of the answers to the similar questions with no any success. Any hint on what might be causing the issue in my case? location /wtlib/ { alias /var/www/shared/wtlib_4/; index index.php; } location ~ /wtlib/.*\.php$ { alias /var/www/shared/wtlib_4/; try_files $uri =404; if ($fastcgi_script_name ~ /wtlib(/.*\.php)$) { set $valid_fastcgi_script_name $1; } fastcgi_pass 127.0.0.1:9013; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/shared/wtlib_4$valid_fastcgi_script_name; fastcgi_param REDIRECT_STATUS 200; include /etc/nginx/fastcgi_params; } Thanks all ! Update: Following seems to be working fine: location /wtlib/ { alias /usr/share/php/wtlib_4/; location ~* .*\.php$ { try_files $uri @php_wtlib; } location ~* \.(html|htm|js|css|png|jpg|jpeg|gif|ico|pdf|zip|rar|air)$ { expires 7d; access_log off; } } location @php_wtlib { if ($fastcgi_script_name ~ /wtlib(/.*\.php)$) { set $valid_fastcgi_script_name $1; } fastcgi_pass $byr_pass; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/php/wtlib_4$valid_fastcgi_script_name; fastcgi_param REDIRECT_STATUS 200; include /etc/nginx/fastcgi_params; }

  Read the article

• Nginx flv audio pseudo stream works but video is not loading

  - by sarah

  I am working on a development server for a company & they want nginx webserver to work with. So the requirements for their company is, it should be capable of doing following things i.e hotlink protection, mp4 & flv pseudo stream & secure streaming. However nginx fulfills their requirements and i am configuring their server from past 2 days as i am new to this field so i've only acheived hotlinking prevention in past 2 days. But the problem on which i am stuck is flv pseudo streaming, to make work to mp4 pseudo stream it was just a piece of paper but i am really fuc*ed up with flv pseudo stream. I have converted my flv videos with flvmdi tools to insert many keyframes but the problem is , when i try to seek video from following keyframes that are generated by flvmdi i.e test.flv?start=2681223, video does not load but audio pseudo works fine. So it means no problem with my flv configuration in nginx.conf file. And the forum that i used to compile my nginx-1.2.1 is http://h264.code-shop.com/trac/wiki/Mod-H264-Streaming-Nginx-Version2 & by adding additional module --with-http_flv_module. This forum is really active, hopes i will resolve my problem as soon as you guys will provide me some guide.

  Read the article

• Why I can't find mod_dav_svn 1.6 in rpmforge?

  - by Vincenzo

  This is what I'm doing: # yum --enablerepo=rpmforge list mod_dav_svn Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * addons: mirrors.adams.net * base: mirror.sanctuaryhost.com * extras: mirror.sanctuaryhost.com * rpmforge: fr2.rpmfind.net * updates: mirror.steadfast.net Available Packages mod_dav_svn.x86_64 1.4.2-4.el5_3.1 base Why 1.4.2? Where is 1.6+?

  Read the article

• df command show no output

  - by user119720

  I'm running the linux distro on my server.When i want to verify the size of the disk, i'm issuing this commnand to get the output. df -h But it does not produce ANY output.Strangely enough when i'm issuing other command such as fdisk -l or du -h it can show output normally. Does anyone now why is this happening?Thanks. edit: here is the output of cat /etc/fstab none /dev/pts devpts rw 0 0 and this is for mount command none on /dev/pts type devpts (rw) none on /proc/sys/fs/binfmt_misc tpe binfmt_misc (rw) edit(2): here is the output of cat /proc/mounts /dev/vzfs / vzfs rw,relatime,usrquota,grpquota 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 none /dev/tmpfs rw,relatime 0 0 none /dev/pts devpts rw,relatime 0 0 none /proc/sys/fs/binfmt_misc binfmt_msc rw,relatime 0 0

  Read the article

• How can I increase space on the Filesystem linux?

  - by xtrimsky

  I am renting a dedicated server with Parallel Plesk on it (which I hate and I try to use command line). I have a filesystem that is full,"df -H" prints this: Filesystem Size Used Avail Use% Mounted on /dev/md1 4.0G 4.0G 361k 100% / /dev/mapper/vg00-usr 4.3G 1.4G 3.0G 32% /usr /dev/mapper/vg00-var 4.3G 2.8G 1.6G 64% /var /dev/mapper/vg00-home 4.3G 4.4M 4.3G 1% /home none 1.1G 24M 1.1G 3% /tmp tmpfs 1.1G 0 1.1G 0% /usr/local/psa/handlers/before-local tmpfs 1.1G 0 1.1G 0% /usr/local/psa/handlers/before-queue tmpfs 1.1G 0 1.1G 0% /usr/local/psa/handlers/before-remote tmpfs 1.1G 0 1.1G 0% /usr/local/psa/handlers/info tmpfs 1.1G 0 1.1G 0% /usr/local/psa/handlers/spool The server I'm renting has 1TB of hard drive. Why are these so small, how can I increase my storage ? (I'm pretty beginner with Linux). Thank you

  Read the article

• Partition is missing in /dev

  - by haimg

  I'm having a strange problem since I moved from Centos5 to Centos6. I have three disks, first two are used as a RAID1, and third one is a stand-alone backup disk that is not listed in /etc/fstab (it is mounded when needed and then unmounted). My problem: After a boot, /dev/sdc exists but /dev/sdc1 does not. Also, the links in /dev/disks are also absent for the first partition of sdc. Disk itself is fine, and if I hot-remove it and plug it back in, /dev/sdc1 appears ok and everything is working. My question: What subsystem manages auto-discovery of disks, partitions, etc. during the boot process (e.g. what creates /dev/disks/by-label)? How do I configure it to scan /dev/sdc too and create all relevant files and links in /dev ? Edit: Here's the relevant part of dmesg output (the only place sdc appears). It does list sdc1, but it's not in /dev! sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdc] Write Protect is off sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdc: sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: DMAR:[DMA Read] Request device [00:1e.0] fault addr 361bc000 DMAR:[fault reason 06] PTE Read access is not set sdb1 sdb2 sdb3 sdc1 sda1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 3:0:0:0: [sdc] Attached SCSI disk sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk

  Read the article

• rsyslog server - Can you split up and organize logs?

  - by Jakobud

  I recently setup one of our servers as an rsyslog server. I now have our firewall setup to log everything to that rsyslog server. But there doesn't seem to be an organization of the logs. All the firewall logs are just being dumped into the /var/log/messages on the rsyslog server. I guess I was maybe expecting them to at least be in a machine specific log file or directory. How can I organize the incoming logging? If I setup 20 servers to all log everything to a central rsyslog server, I really don't want everything being dumped into one big file or a few files. How can I setup rsyslog to tell it where to log what? Like if all the logs for a specific server were in it's own directory/file, etc... Is this possible?

  Read the article

• Domain only responding to certain locations?

  - by CuriosityHosting

  I have a client who's been having problems with his site. The server doesn't seem to want to load hes site in certain countries, though other sites are fine. But this site [link removed] only seems to load in the US and Canada. In Europe, the UK, Asia etc, the site seems to be blocked (been like this for a week now). I've looked over the server and it seems fine. Other sites work fine, and the NS are set up properly, pointing to my main server, at http://puu.sh/MIGF Any ideas?

  Read the article

• CPANEL ModSec2 not working with SecFilterSelective

  - by jfreak53

  Ok, I have cPanel/WHM latest on a Dedi, here are my specs on apache: Server version: Apache/2.2.23 (Unix) Server built: Oct 13 2012 19:33:23 Cpanel::Easy::Apache v3.14.13 rev9999 I just ran a re-compile using easyapache as you can see by the date. When running it I made sure that ModSec was selected and it stated in big bold letters something to the effect of If you install Apache 2.2.x you get ModSec 2 So I believed it :) I recompiled, I then ran: grep -i release /home/cpeasyapache/src/modsecurity-apache_2.6.8/apache2/mod_security2.c Hmm, the file is there but grep doesn't output anything, if I run: grep -i release /home/cpeasyapache/src/modsecurity-apache_1.9.5/apache2/mod_security.c I of course get the ModSec 1 version output. But the thing is that ModSec2 is installed since the c file is there. So I continued and put the following in modsec2.user.conf: SecFilterScanOutput On SecFilterSelective OUTPUT "text" Now when I restart Apache I get this error: Syntax error on line 1087 of /usr/local/apache/conf/modsec2.user.conf: Invalid command 'SecFilterScanOutput', perhaps misspelled or defined by a module not included in the server configuration Now supposedly this is supposed to work, I even have it running in ModSec2 on a non-cpanel server setup manually. So I know ModSec2 supports it. Anyone have any ideas? I have asked this question over at cpanel forum and it got nowhere.

  Read the article

• IPTables forward from only one ip on my server

  - by user1307079

  I was able to get my server to forward connections on a certain port to a different IP, but when I add -d to specify an IP to froward from, It does not work. This is what I am trying, iptables -t nat -A PREROUTING -d 173.208.230.107 -p tcp --dport 80 iptables -t nat -nvL-j DNAT --to-destination 38.105.20.226:80. It works fine without the -d. Here is my ifconfig dump: em1 Link encap:Ethernet HWaddr 00:A0:D1:ED:D0:54 inet addr:173.208.230.106 Bcast:173.208.230.111 Mask:255.255.255.248 inet6 addr: fe80::2a0:d1ff:feed:d054/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:100058 errors:0 dropped:0 overruns:0 frame:0 TX packets:18941701 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:12779711 (12.1 MiB) TX bytes:825498499 (787.2 MiB) Memory:fbde0000-fbe00000 em1:9 Link encap:Ethernet HWaddr 00:A0:D1:ED:D0:54 inet addr:173.208.230.107 Bcast:173.208.230.111 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fbde0000-fbe00000 em1:10 Link encap:Ethernet HWaddr 00:A0:D1:ED:D0:54 inet addr:173.208.230.108 Bcast:173.208.230.111 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fbde0000-fbe00000 em1:11 Link encap:Ethernet HWaddr 00:A0:D1:ED:D0:54 inet addr:173.208.230.109 Bcast:173.208.230.111 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fbde0000-fbe00000 em1:12 Link encap:Ethernet HWaddr 00:A0:D1:ED:D0:54 inet addr:173.208.230.110 Bcast:173.208.230.111 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fbde0000-fbe00000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

  Read the article

• Mongo Scripting the shell

  - by cKendrick

  On my production stack, I have a front-end server and a Mongo server. I would like to be able to set a cron job on the front-end server to create some logs daily. I wrote a script that does this: ./mongo server:27017/dbname --quiet my_commands.js If I run it from the Mongo server as above, it works fine. However, I would like to be able to run it from the front-end server. When I try to do that, I get: -bash: mongo: command not found Since mongo is not installed on the front end server, it gives me that error. Is it possible to somehow bind mongo to my mongo on the Mongo server?

  Read the article

• Tuning MySQL to consume less memory

  - by Alex

  I have a VM which has 2GB Ram, (full specs) And I am setting up a site which has one table in particular with over a million records. There's little or no usage of this particular database (perhaps once or twice a day) but simply running mysql grinds the whole server to a halt. I've looked through the top results but nothing is really denting the CPU however the memory seems to be the issue. The site isnt even live of taking requests yet. the memory situation looks like this: # free -m total used free shared buffers cached Mem: 2006 1880 126 0 3 53 -/+ buffers/cache: 1823 183 Swap: 2047 345 1702 Are there any good pointers to tune mysql to stop hogging the system memory? Thanks very much EDIT: (requested by 8bit): http://tny.cz/b41a0b12

  Read the article

• How do you re-mount an ext3 fs readwrite after it gets mounted readonly from a disk error?

  - by cagenut

  Its a relatively common problem when something goes wrong in a SAN for ext3 to detect the disk write errors and remount the filesystem read-only. Thats all well and good, only when the SAN is fixed I can't figure out how to re-re-mount the filesystem read-write without rebooting. Behold: [root@localhost ~]# multipath -ll mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][active] \_ 1:0:0:1 sdb 8:16 [active][ready] \_ 2:0:0:1 sdc 8:32 [active][ready] [root@localhost ~]# mount /dev/mapper/mpath0 /mnt/foo [root@localhost ~]# touch /mnt/foo/blah All good, now I yank the LUN out from under it. [root@localhost ~]# touch /mnt/foo/blah [root@localhost ~]# touch /mnt/foo/blah touch: cannot touch `/mnt/foo/blah': Read-only file system [root@localhost ~]# tail /var/log/messages Mar 18 13:17:33 localhost multipathd: sdb: tur checker reports path is down Mar 18 13:17:34 localhost multipathd: sdc: tur checker reports path is down Mar 18 13:17:35 localhost kernel: Aborting journal on device dm-2. Mar 18 13:17:35 localhost kernel: Buffer I/O error on device dm-2, logical block 1545 Mar 18 13:17:35 localhost kernel: lost page write due to I/O error on dm-2 Mar 18 13:17:36 localhost kernel: ext3_abort called. Mar 18 13:17:36 localhost kernel: EXT3-fs error (device dm-2): ext3_journal_start_sb: Detected aborted journal Mar 18 13:17:36 localhost kernel: Remounting filesystem read-only It only thinks its read-only, in reality its not even there. [root@localhost ~]# multipath -ll sdb: checker msg is "tur checker reports path is down" sdc: checker msg is "tur checker reports path is down" mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=0][hwhandler=0][rw] \_ round-robin 0 [prio=0][enabled] \_ 1:0:0:1 sdb 8:16 [failed][faulty] \_ 2:0:0:1 sdc 8:32 [failed][faulty] [root@localhost ~]# ll /mnt/foo/ ls: reading directory /mnt/foo/: Input/output error total 20 -rw-r--r-- 1 root root 0 Mar 18 13:11 bar How it still remembers that 'bar' file being there... mystery, but not important right now. Now I re-present the LUN: [root@localhost ~]# tail /var/log/messages Mar 18 13:23:58 localhost multipathd: sdb: tur checker reports path is up Mar 18 13:23:58 localhost multipathd: 8:16: reinstated Mar 18 13:23:58 localhost multipathd: mpath0: queue_if_no_path enabled Mar 18 13:23:58 localhost multipathd: mpath0: Recovered to normal mode Mar 18 13:23:58 localhost multipathd: mpath0: remaining active paths: 1 Mar 18 13:23:58 localhost multipathd: dm-2: add map (uevent) Mar 18 13:23:58 localhost multipathd: dm-2: devmap already registered Mar 18 13:23:59 localhost multipathd: sdc: tur checker reports path is up Mar 18 13:23:59 localhost multipathd: 8:32: reinstated Mar 18 13:23:59 localhost multipathd: mpath0: remaining active paths: 2 Mar 18 13:23:59 localhost multipathd: dm-2: add map (uevent) Mar 18 13:23:59 localhost multipathd: dm-2: devmap already registered [root@localhost ~]# multipath -ll mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][enabled] \_ 1:0:0:1 sdb 8:16 [active][ready] \_ 2:0:0:1 sdc 8:32 [active][ready] Great right? It says [rw] right there. Not so fast: [root@localhost ~]# touch /mnt/foo/blah touch: cannot touch `/mnt/foo/blah': Read-only file system OK, doesn't do it automatically, I'll just give it a little push: [root@localhost ~]# mount -o remount /mnt/foo mount: block device /dev/mapper/mpath0 is write-protected, mounting read-only The hell you are: [root@localhost ~]# mount -o remount,rw /mnt/foo mount: block device /dev/mapper/mpath0 is write-protected, mounting read-only Noooooooooo. I have tried all sorts of different mount/tune2fs/dmsetup commands and I cannot figure out how to get it to un-flag the block device as write-protected. Rebooting will fix it, but I'd much rather do it on-line. An hour of googling has gotten me nowhere either. Save me ServerFault.

  Read the article

• vsftpd, virtual users and permissions. Avoid using chmod 777?

  - by Jakobud

  I am running vsftpd with Virtual Users (managed through a MySQL db). Each users home/default directory is owned by vsftpd:vsftpd. I need to give a user read/write permissions to some website files, owned by apache:apache so they can make some changes. I did a bind mount for the web directory to a directory in the ftp user's home/default directory. When logging in, the user is not able to write to the web folder, unless I set files to 777. Is it possible to set this up with making the directory and it's files 777? The web directory needs to be apache:apache in order for apache to work with it.

  Read the article

• DirectAdmin Centos4 server has virus

  - by Rogier21

  Hello all, I have a problem with a webserver that runs Centos4 with DirectAdmin. Since a few weeks some websites hosted on it are not redirecting on search engines properly, they are redirected to some malware site, resulting in a ban from google. Now I have used 3 virusscanners: ClamAV: Didn't find anything Bitdefender: Found a 2-3 files with JS infection, deleted them AVG: Finds lots of files, but doesn't have the option to clean! The virus that it finds is: JS/Redir JS/Dropper Still the strange thing is: website a (www.aa.com) does not have any infected files (have gone through all the files manually, is a custom PHP app, nothing special) but does still have the same virus. Website b (www.bb.com) does have the infected files as only one. I deleted all these files and suspended the account, but no luck, still the same error. I do get the log entries on the website from the searchengines so the DNS entries are not changed. But now I have gone through the httpd files but cannot find anything. Where can I start looking for this?

  Read the article

• mod_pagespeed drops headers

  - by kuboslav

  I have installed mod_pagespeed in Apache. It drops header X-UA-Compatible. When I turned of mod_pagespeed X-UA-Compatible appear in headers. Have anyone idea how to disable this in mod_pagespeed? My .htaccess file: <IfModule mod_headers.c> Header set X-UA-Compatible "IE=Edge,chrome=1" </IfModule> <IfModule mod_rewrite.c> Options -MultiViews RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^ index.php [L] </IfModule> Thanks a lot!

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >