Search Results

Search found 3461 results on 139 pages for 'drives'.

Page 59/139 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

  • What is the safest way to create a boot sector on an existing system drive?

    - by zespri
    I have 2 drives in my PC one is primary master and used to be the system drive with windows XP installed. The second one is secondary and has Windows 7 installed that I'm using as the operating system. I want to decommission the old hard drive with XP and re-plug the Windows 7 one as the primary master so I could boot from it. What is the safest way for me to write the correct boot sector on the Windows 7 hard drive so I don't ruin my Windows 7 installation?

    Read the article

  • upgrading hard drive on toshiba satellite 5200 ....

    - by krul
    Hi, I have this beautiful & old laptop and would like to replace hard drive. I've purchased samsung 120GB hard drive and exchange hard drives. When I turn on computer my laptop doesn't recognize hard drive at all. It doesn't find nothing under master drive. What am I doing wrong, and is it possible to make this upgrade? Thanks

    Read the article

  • NAS device claims drive in a RAID is degraded but S.M.A.R.T. says it is fine

    - by Nathan Villaescusa
    I have a Synology DS213 with two 600GB drives in RAID 1. Last night the device reported that my second drive had become degraded and that I should replace it. When I ran a extensive S.M.A.R.T. test the results said that the drive is okay. How can I confirm that the drive is actually bad? Is there any case that the degraded drive is the good one and that it is actually the other drive that is bad?

    Read the article

  • Is there an easy way to copy an audio CD in Mac OS X?

    - by Bob D
    (not a commercial CD). I did some recordings of a band years ago and ran into one of the band members who asked me if I could make copies. I assumed that this would be easy. I know that I can rip the CD into iTunes and then burn a new CD, but I have two optical drives available, is there a way to simply copy the CD from one drive to the other in one step?

    Read the article

  • Does extra hard drive cache make a difference for streaming video?

    - by johnny
    I am looking at the following two drives for a RAID device, which will be streaming normal things but also a lot of video: Seagate Constellation ES.3 ST4000NM0033 - hard drive - 4 TB - SATA-600 TOSHIBA DT01ACA300 3TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Will the 128 MB cache on the Seagate have an effect in my described scenario, compared to the 64 MB on the Toshiba? If so, what sort of difference can I expect? I'm using a qnap device, if that matters.

    Read the article

  • RAID for a home PC

    - by Mennon
    I have a home PC with two identical physical drives (SATA), ASUS P5Q-EM motherboard and Windows 7. HDD 1 has two partitions C: and D:, Windows is installed on C: and everthing else is on D:. Now the task is to organize some kind of RAID to mirror all data from HDD 1 to HDD 2 (at the moment HDD 2 is empty, no partitions), so HDD 2 is a backup copy of HDD 1. I've never had chance before to work with RAID, so any suggestions would be greatly appreciated.

    Read the article

  • RAID for a home PC

    - by Mennon
    I have a home PC with two identical physical drives (SATA), ASUS P5Q-EM motherboard and Windows 7. HDD 1 has two partitions C: and D:, Windows is installed on C: and everthing else is on D:. Now the task is to organize some kind of RAID to mirror all data from HDD 1 to HDD 2 (at the moment HDD 2 is empty, no partitions), so HDD 2 is a backup copy of HDD 1. I've never had chance before to work with RAID, so any suggestions would be greatly appreciated.

    Read the article

  • HDD RAID0 question

    - by Jim
    If you have 2 raptor 10k rpm drives in Raid0, can you add another sata (7200prm) drive outside of the RAID or would it have to be inside the RAID? What would be the consequences of adding a 7200 RPM drive to the raptor 10k rpm RAID0 besides the I/O speed going to 7200rpm.

    Read the article

  • Please wait for User Profile Service... on WIndows 7 takes around 1-2 minutes to process

    - by Chris
    When loggging into our domain, after entering account credentials the log in process takes around 1-2 minutes before it gets past the User Profile Service, the rest of the process takes 2-3 secs. This effects all machines running Windows 7 Enteprise 32-bit and is on fairly high spec laptops (SSD drives, i5 2.93Ghz CPU, 4GB memory). Is there any way to speed this up or is this time delay acceptable? Thanks in advance.

    Read the article

  • Ubuntu Server 10.04 Heavy Network Traffic causes disconnect

    - by K Vaughan
    I'm currently running a headless Ubuntu 10.04 server. Installed is the LAMP stack, Joomla, Virtualbox, phpvirtualbox, webmin and proFTP.. It resolves the IP address so I can access it remotely (either the apache2 webserver or the FTP) using DDClient. Any packages installed have been installed using apt-get. Webmin, although discouraged in Ubuntu Server, is used mostly to administer the webserver aspect. This issue also appeared when I was using Ubuntu Server 10.10. After periods of heavy network traffic, whether local or remote, the connect drops. I'm talking specifically about the transfer of files via FTP, SCP or Samba (the latter of which I seldom use). There is no response to ping or ssh. I can't FTP to the server nor can I load the website. There are times when the server has been on for a few days and everything runs fine because I haven't accessed it much, if at all (thus not much network traffic). I've gone through a few hardware changes although I don't believe this has cause the issue: this has been happening long before I made any changes. At first I thought it was my ISP-provided router blocking traffic because of some kind of misconfiguration (perhaps assuming it was some kind of DoS attack). I've changed routers and still found no success. I've checked syslog, dmesg and kern.log for warnings but have uncovered none. I've ran memtest via the GRUB2 menu at boot and once it turned up 4 errors. I ran again with individual sticks of RAM in various slots and everything turned up fine. I've looked through the BIOS settings and everything looks fine. I've tried unplugging unnecessary pieces of hardware (other internal hard drives, CD drives, floppy, PCI cards, etc). Any help or tips on how I can even begin to troubleshoot this would be very much appreciated. Please note that i've only started playing with servers as a hobby so my knowledge wouldn't be the most refined. I'm comfortable with command line and have the initiative to know how to look up something I can't do. Unfortunately I can't seem to find any issues like this. Additionally: If a solution can't be found some assistance to write a script that will cause the server to reboot automatically if, after x minutes, it gets no response to pinging somewhere like google. Admittedly that's not the cleanest solution should my internet end up going down but I can't think of what else to do.

    Read the article

  • How much of slow and fast flash memory a "flash memory" have?

    - by gsc-frank
    Trying to know what is the best of my flash memories to use ReadyBoost I realize that I don't know how much of fast flash memory each of my flash drives have. One can read: In some situations, you might not be able to use all of the memory on your device to speed up your computer. For example, some flash memory devices contain both slow and fast flash memory, but ReadyBoost can only use fast flash memory to speed up your computer. From http://windows.microsoft.com/is-IS/windows7/Using-memory-in-your-storage-device-to-speed-up-your-computer

    Read the article

  • howto plan RAID for ESX

    - by maruti
    eight 300GB SAS drives are available. Can ESX be put on one disk as RAID-0 and others as RAID-5 ? so that in the event of disk failure data (VMs) are safe. if os disk RAID-0 fails could that be installed on replacement disk and still be able to keep VMs running? if not RAID-1 for OS is only option for OS disk? please suggest any other RAID options.

    Read the article

  • Multiple nt52 entries in bootmgr

    - by SLaks
    I have a machine with Windows XP, Server 2003 R2, and Server 2008 R2. Right now, bootmgr has one entry for Server 2008 R2 and one entry for ntldr, which then leads to the ntldr boot.ini menu. Is it possible to add two different nt52 entries on two partitions so that I can access all three OSes from the bootmgr menu? Right now, Server 2008 and XP are in logical drives on an extended partition, but (I assume) I can image them onto basic partitions if necessary.

    Read the article

  • External hard drive that gets its power supply from the PC.

    - by AngryHacker
    I need an external drive to connect to my MacMini. I've been using an 80gb 2.5 drive in an enclosure and it's fine, but now I need a 1.5TB drive. Unfortunately all the 1.5TB drives I found need a separate power supply. I'd like it to be able to feed its power off the USB drive (just like my 80gb drive does). Does something like that exists?

    Read the article

  • linux: automount internal hard drive during boot?

    - by John Doe
    i try to create my own NAS and i need to automount the internal sata disks during boot i know i could do using fstab but im searching for a more easy/generalized way so its easier to scale with less handwork needed for every hard drive attached (or every mainboard added to the cluster) so anyone knows how to automount internal disks without using fstab like ubuntu does for usb drives? im using ubuntu server 9.10 thx all

    Read the article

  • IIS Home Directory path drive letters got changed on all my sites?

    - by Max Fraser
    Today in IIS I came into my server and all of my drive letters were changed from D: to E:? Hacked I guess? Anyone ever have this happen to them? Windows 2003 Server, only 2 drives in the Machine C:, D:. I have not touched the machine and the Drive Letter itself did not change just the setting in IIS for site Home Directory that point to it. IE: D:\websites\mywebsite.com was changed to E:\websites\mywebsite.com

    Read the article

  • Snow Leopard not reading NTFS

    - by dtmunir
    I just upgraded a brand new Macbook Pro that I bought with 10.5 installed to Snow Leopard. After doing the upgrade I am trying to access NTFS partitions on my external hard drive but they are just not showing up. I went ahead and installed Windows 7 using Parallels, and I can access the NTFS partitions from within Windows, but not from Mac OS X. I know that Snow Leopard should be able to at least read NTFS drives, so what is going on here?

    Read the article

  • Linux RAID-0 performance doesn't scale up over 1 GB/s

    - by wazoox
    I have trouble getting the max throughput out of my setup. The hardware is as follow : dual Quad-Core AMD Opteron(tm) Processor 2376 16 GB DDR2 ECC RAM dual Adaptec 52245 RAID controllers 48 1 TB SATA drives set up as 2 RAID-6 arrays (256KB stripe) + spares. Software : Plain vanilla 2.6.32.25 kernel, compiled for AMD-64, optimized for NUMA; Debian Lenny userland. benchmarks run : disktest, bonnie++, dd, etc. All give the same results. No discrepancy here. io scheduler used : noop. Yeah, no trick here. Up until now I basically assumed that striping (RAID 0) several physical devices should augment performance roughly linearly. However this is not the case here : each RAID array achieves about 780 MB/s write, sustained, and 1 GB/s read, sustained. writing to both RAID arrays simultaneously with two different processes gives 750 + 750 MB/s, and reading from both gives 1 + 1 GB/s. however when I stripe both arrays together, using either mdadm or lvm, the performance is about 850 MB/s writing and 1.4 GB/s reading. at least 30% less than expected! running two parallel writer or reader processes against the striped arrays doesn't enhance the figures, in fact it degrades performance even further. So what's happening here? Basically I ruled out bus or memory contention, because when I run dd on both drives simultaneously, aggregate write speed actually reach 1.5 GB/s and reading speed tops 2 GB/s. So it's not the PCIe bus. I suppose it's not the RAM. It's not the filesystem, because I get exactly the same numbers benchmarking against the raw device or using XFS. And I also get exactly the same performance using either LVM striping and md striping. What's wrong? What's preventing a process from going up to the max possible throughput? Is Linux striping defective? What other tests could I run?

    Read the article

  • RAID 50 24Port Fast Writes Slow Reads - Ubuntu

    - by James
    What is going on here?! I am baffled. serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo dd if=/dev/zero of=/Volumes/MercuryInternal/test/test.fs bs=4096k count=10000 10000+0 records in 10000+0 records out 41943040000 bytes (42 GB) copied, 57.0948 s, 735 MB/s serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo dd if=/Volumes/MercuryInternal/test/test.fs of=/dev/null bs=4096k count=10000 10000+0 records in 10000+0 records out 41943040000 bytes (42 GB) copied, 116.189 s, 361 MB/s OF NOTE: My RAID50 is 3 sets of 8 disks. - This might not be the best config for SPEED. OS: Ubuntu 12.04.1 x64 Hardware Raid: RocketRaid 2782 - 24 Port Controller HardDriveType: Seagate Barracuda ES.2 1TB Drivers: v1.1 Open Source Linux Drivers. So 24 x 1TB drives, partitioned using parted. Filesystem is ext4. I/O scheduler WAS noop but have changed it to deadline with no seemingly performance benefit/cost. serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo gdisk -l /dev/sdb GPT fdisk (gdisk) version 0.8.1 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Disk /dev/sdb: 41020686336 sectors, 19.1 TiB Logical sector size: 512 bytes Disk identifier (GUID): 95045EC6-6EAF-4072-9969-AC46A32E38C8 Partition table holds up to 128 entries First usable sector is 34, last usable sector is 41020686302 Partitions will be aligned on 2048-sector boundaries Total free space is 5062589 sectors (2.4 GiB) Number Start (sector) End (sector) Size Code Name 1 2048 41015625727 19.1 TiB 0700 primary To me this should be working fine. I can't think of anything that would be causing this other then fundamental driver errors? I can't seem to get much/if any higher then the 361MB a second, is this hitting the "SATA2" link speed, which it shouldn't given it is a PCIe2.0 card. Or maybe some cacheing quirk - I do have Write Back enabled. Does anyone have any suggestions? Tests for me to perform? Or if you require more information, I am happy to provide it! This is a video fileserver for editing machines, so we have a preference for FAST reads over writes. I was just expected more from RAID 50 and 24 drives together... EDIT: (hdparm results) serveradmin@FILESERVER:/Volumes/MercuryInternal$ sudo hdparm -Tt /dev/sdb /dev/sdb: Timing cached reads: 17458 MB in 2.00 seconds = 8735.50 MB/sec Timing buffered disk reads: 884 MB in 3.00 seconds = 294.32 MB/sec EDIT2: (config details) Also, I am using a RAID block size of 256K. I was told a larger block size is better for larger (in my case large video) files. EDIT3: (Bonnie++ Results. Would love some guidance with this!)

    Read the article

  • Install Windows 7 over Windows XP - Permissions

    - by andreas
    Hello, i want to install Windows 7 in a workstation where windows xp is currently installed. The system has 2 hard drives with 5 partitions and there are permissions on folders on different partitions. After the installation of Windows 7 will these permissions be visible? Will the permissions be lost? Will i have to re-gain control over the folders in these partitions? Thanks,

    Read the article

  • SUBST for OSX? Error when trying to map local folder as network drive on Mac OSX 10.9

    - by Taylor Wright
    I would like to map a local folder as a drive (similar to Window's SUBST). One solution I found was to map a shared folder, but I get the following error when using a local folder: There was a problem connecting to the server “MyDrive.local”. This file server is available on your computer. Access the volumes and files locally. I was using this guide: Mapping Drives (Shared Folders) on Mac OS X

    Read the article

  • certain thumbdrives keep a system from going out of the boot screen

    - by The Journeyman geek
    I have an old r51 which i boot off usb. Apparently, if i have a toshiba 2gb thumbdrive similar to this plugged in, or an old imation 1gb drive plugged in, it won't boot at all- it freezes in the bios loading screen until its unplugged. I need to try it on another system but i'm wondering what could be causing it- since i suppose this is at a lower level than filesystem, and the drives work fine otherwise - even being readable if inserted after the system is booted from another source, with neither drive plugged in

    Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >