Search Results

Search found 3786 results on 152 pages for 'life'.

Page 59/152 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• Bind DHCP Server to Network Bridge

  - by Luke

  My wireless router died, so I decided to route everything through my server. So I installed a second NIC and a wireless card to be my new network: 1 NIC to the Modem, 1 NIC to the switch, and the Wireless to... Well, wireless. Anyways, I got far enough to get DHCP to work on just ONE adapter when I used Internet Connection Sharing (I couldn't get RRAS set up for the life of me), then I decided to try bridging the wireless and second NIC. Now, the DHCP server won't bind to the bridge, but I can enter manual IP's in my clients and it'll connect to the Internet. I also tried changing my wireless adapter's IP to 192.168.0.2, and to 192.168.1.1 to try to set up a separate scope, but to no avail. Running Windows Server 2003

  Read the article

• Why could cause the keypad backlights to spontaneously illuminate on my Palm Treo?

  - by LeopardSkinPillBoxHat

  I have a Palm Treo 680 smart phone. I have noticed recently that when the phone is turned off, the keypad backlights will spontaneously illuminate. This is particularly annoying because it drains the battery life of the Treo -- when I woke up this morning, the battery was completely flat and I had to plug it in to wake it up again. I suspect that this has something to do with the Energy Dimmer application (I have version 2.16 installed). I have disabled this application today to see if it makes the problem go away. Has anyone else had this problem, and do you have any solutions?

  Read the article

• Root access on media temple.com dv server

  - by Chris M

  This may be a dumb question. I just purchased dv access at media temple.com. I set up root access as required, set up a root access password. Now, for the life of me I can not figure out how this password gets used. Everywhere i try to use the password it does not work. Even tried to ssh with Putty and that didnt work either. Can somebody possibly explain to me what this root access is and how I use it. Im a newbie just trying to learn something new.

  Read the article

• IIS7 URL Rewrite for URL with &rsquo;

  - by blizz

  I'm trying to redirect the following URL in IIS7 using the URL Rewrite module: Category/Cat-3/Objectives-of-Pre-Maintenance/WHAT&rsquo;S-THE-STORY-ON-LOW-CARB-DIETS-AND-EXERCISE-.aspx but for the life of me I can not get it. I tried replacing the &rsquo; with an actual single quote, and that worked fine! But for the purpose of this redirect, I need the HTML code for the quote, and not the quote itself. Here is the rule from web config: <rule name="Redirect" patternSyntax="ECMAScript" stopProcessing="true"> <match url="^Category/Cat-3/Objectives-of-Pre-Maintenance/WHAT&amp;rsquo;S-THE-STORY-ON-LOW-CARB-DIETS-AND-EXERCISE-\.aspx" /> <conditions> <add input="{HTTP_HOST}" pattern="www.example.com" /> </conditions> <action type="Redirect" url="http://www.example.com/redirecturl/" appendQueryString="false" /> </rule> Any ideas would be very helpful! Thanks

  Read the article

• UPS and power strip interactions?

  - by chaos

  Sometimes I hear that you shouldn't plug (UPS brand X / any UPS) into (power strip brand X / any power strip) because of some interaction leading to poorly conditioned power, reduced battery life, massive explosions spattering the room with battery acid, and so on. Sometimes I hear that it's the power strip that you shouldn't plug into the UPS. What I haven't gotten is a clear idea of how reliable these recommendations are or how generally/specifically they apply. Can anyone speak precisely and non-urban-legendfully on these UPS and power strip interactions, if there are in fact ones worth thinking about?

  Read the article

• Outlook folder structure Template

  - by Filip Ekberg

  Having a lot of different customers and a lot of different areas to work with makes it trivial to have your mail folders in order. Everytime I get a new Project / Customer I want to add a certain Folder Structure in my "Customer" / "Project" sub directory. It might look like this: Customer_name/ Bugs Documents Important Support/ Done And as it is today, I have to manually add these manually, which is harsh when you have a lot of it going on and each sub directory under the customer_name directory needs to have "display all items" since it's important to me to see all Items in Bugs / Support / Important. Makes my life easier. So, Is it possible to Automize the process somehow? Macro? Folder Templates? What are my options?

  Read the article

• How do I create an ad hoc network in Windows 8?

  - by George Edison

  For the life of me, I can't figure out how to create an ad hoc wireless network in Windows 8. Here is what happens if I follow the steps from Windows 7: Right click the network icon and click "Network and Sharing Center": Click "Set up a new connection or network": Where is the option to create an ad hoc network? Therefore I have two related questions: Did I miss something? Is it in there somewhere and I just haven't found it yet? If this feature is not available, is there a tool somewhere I can use that provides this capability? Further information: I have an Intel Wireless WiFi 4965 AGN adapter. I tried the Intel PRO wireless tool and it didn't offer an ad hoc option.

  Read the article

• Windows 2008R2 blocks outbound LDAP for non-admins?

  - by Jon Bailey

  I've got a Windows 2008R2 terminal server with ~30 users on it. It's joined to a Samba-based domain. During the login script, we connect directly to the LDAP server to pull out certain profile information. This used to work just fine. Now, it doesn't, but only for non-local-admin accounts. Local admins work fine. As a non-local-admin: Connection to ports 389 or 636 just terminate (wireshark on the LDAP server reveals no connection attempt) Connection to other ports on the same server work fine Same thing on multiple LDAP servers Windows firewall is disabled Can't find any other rules/policies that may block this I suspect since this used to work, it came down during an update, but for the life of me, I can't find what. EDIT: I just ran Wireshark on the machine and didn't see anything when connecting to the LDAP server in question (or any LDAP server for that matter). I can, however, see traffic when I connect to that server on another port.

  Read the article

• nginx symlinks permission denied / 403 Forbidden on Mac OSX

  - by Levi Roberts

  So I have an nginx server running on Mac OSX and I am trying to create a symlink in my nginx www directory from somewhere else. In the browser I get the wonderful 403 Forbidden error. I have also tried chmod'ing my life away for the past few hours. There doesn't seem to be anything on the stack about it. One thing concerns me is that I am not sure if symlinks are directly supported by ngninx on Mac. Trying to use disable_symlink directive results in: nginx: [emerg] unknown directive "disable_symlinks" in /usr/local/etc/nginx/nginx.conf:44` Some info about my setup: nginx -v : nginx version: nginx/1.4.2 To create the symlink I do the following: cd /Users/levi/www ln -s "/Users/levi/Desktop/.../client" "/Users/levi/www/client" The error in the log: [error] 11864#0: *7 open() "/Users/levi/www/client" failed (13: Permission denied), client: 127.0.0.1, server: _, request: "GET /client HTTP/1.1", host: "localhost" Any help is much appreciated. Let me know if there's any more information I can give you.

  Read the article

• What can I do to prevent my user folder from being tampered with by malicious software?

  - by Tom Wijsman

  Let's assume some things: Back-ups do run every X minutes, yet the things I save should be permanent. There's a firewall and virus scanner in place, yet there happens to be a zero day attack on me. I am using Windows. (Although feel free to append Linux / OS X parts to your answer) Here is the problem Any software can change anything inside my user folder. Tampering with the files could cost me my life, whether it's accessing / modifying or wiping them. So, what I want to ask is: Is there a permission-based way to disallow programs from accessing my files in any way by default? Extending on the previous question, can I ensure certain programs can only access certain folders? Are there other less obtrusive ways than using Comodo? Or can I make Comodo less obtrusive? For example, the solution should be proof against (DO NOT RUN): del /F /S /Q %USERPROFILE%

  Read the article

• DNA and Quantum computing

  - by Jacques

  I recently(A couple of weeks ago) read an article about the future of processing and how quantum-processors and DNA-processors(DNA-computing) are the future competitors of computing since both will completely outperform the computers of this era. In terms of processing speeds, what do we expect from these two different processing techniques ? Personally I believe that DNA-processing will be a major step towards AI. For labs and office work I think quantum-processing which will be more logical. I'm quite excited that i'm still so young - to see what the future of technology holds! Then again my parents will soon find out what the after-life holds... just as bloody exciting, if not more..

  Read the article

• How can I regain control over a "stuck" scrollbar?

  - by jonsca

  I fear that this is one of those "for your own good" features, but I'm wondering whether or not there is a setting in Firefox or Chrome (or perhaps Windows in general) that will allow me to recapture the scroll bar even though the browser may be busy. I run into this a lot, especially when I have a lot of tabs open in either browser, and so perhaps it's just a fact of life. I wouldn't mind being able to scroll along gradually, even if the page hasn't had time to fully render all of the images, etc., yet. Does such an advanced setting exist "under the hood"?

  Read the article

• Map Caps-Lock to Control in Windows 8.1

  - by Eric Huang

  Before the Windows 8.1 update, I was able to map Caps-Lock to Controls through the type of registry tweak in this post: Remapping a keyboard key in windows 8.1 However, after updating to 8.1, my tweak no longer works. What I had done was Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout] "Scancode Map"=hex:00,00,00,00,00,00,00,00,02,00,00,00,1d,00,3a,00,00,00,00,00 Windows 8.1 may have changed how it interprets the keyboard layout registry, I'm guessing. I'm an avid emacs user, so this problem is a life-or-death scenario for me.

  Read the article

• Removing an iSCSI Target - iSCSI initiator 2.0 on Windows Server 2003 R2

  - by DWong

  For the life of me I cannot figure out how to remove an iSCSI target (Dell Equallogic SAN) from a Windows Server 2003 box. The volume shows up in Windows as drive letter Y:\ Using the iSCSI initiator, I can remove the Target Portal, but cannot remove the Target itself. Can someone give me some guidance on this? I've gone as far as setting the volume offline in the Dell SAN management tool, and even permanently deleted the volume. The Target no longer shows up in the iSCSI Initiator properties, but the drive letter is still there under My Computer. And now Windows is throwing delayed write errors for that drive. There must be a proper way to successfully remove an attached Target. TIA!

  Read the article

• 3D game engine for networked world simulation / AI sandbox

  - by Martin

  More than 5 years ago I was playing with DirectSound and Direct3D and I found it really exciting although it took much time to get some good results with C++. I was a college student then. Now I have mostly enterprise development experience in C# and PHP, and I do it for living. There is really no chance to earn money with serious game development in our country. Each day more and more I find that I miss something. So I decided to spend an hour or so each day to do programming for fun. So my idea is to build a world simulation. I would like to begin with something simple - some human-like creatures that live their life - like Sims 3 but much more simple, just basic needs, basic animations, minimum graphic assets - I guess it won't be a city but just a large house for a start. The idea is to have some kind of a server application which stores the world data in MySQL database, and some client applications - body-less AI bots which simulate movement and some interactions with the world and each other. But it wouldn't be fun without 3D. So there are also 3D clients - I can enter that virtual world and see the AI bots living. When the bot enters visible area, it becomes material - loads a mesh and animations, so I can see it. When I leave, the bots lose their 3d mesh bodies again, but their virtual life still continues. With time I hope to make it like some expandable scriptable sandbox to experiment with various AI algorithms and so on. But I am not intended to create a full-blown MMORPG :D I have looked for many possible things I would need (free and open source) and now I have to make a choice: OGRE3D + enet (or RakNet). Old good C++. But won't it slow me down so much that I won't have fun any more? CrystalSpace. Formally not a game engine but very close to that. C++ again. MOgre (OGRE3D wrapper for .NET) + lidgren (networking library which is already used in some gaming projects). Good - I like C#, it is good for fast programming and also can be used for scripting. XNA seems just a framework, not an engine, so really have doubts, should I even look at XNA Game Studio :( Panda3D - full game engine with positive feedback. I really like idea to have all the toolset in one package, it has good reviews as a beginner-friendly engine...if you know Python. On the C++ side, Panda3D has almost non-existent documentation. I have 0 experience with Python, but I've heard it is easy to learn. And if it will be fun and challenging then I guess I would benefit from experience in one more programming language. Which of those would you suggest, not because of advanced features or good platform support but mostly for fun, easy workflow and expandability, and so I can create and integrate all the components I need - the server with the database, AI bots and a 3D client application?

  Read the article

• Vim style cursor movement for Notepad++

  - by funseiki

  I was just wondering if there was a way to get "vim" style cursor movement (i.e. 'hkjl' movement). After spending much time with vim, I have gotten used to not having to life my hands off the keyboard to move around a text document (going to the arrow keys is also too disruptive :p). Moving back to vim is always an option, but if there was a way to get this feature on notepad++. I have already spent some time in setting up macros and plugins to get my notepad++ environment working the way I want it to. Any help on this matter would be much appreciated.

  Read the article

• Can't Type Tilde character in Mac OS X

  - by Brock Woolf

  Hi this is a new problem that I did not have a few weeks ago. I have a Logitech Illuminated Keyboard running on Mac OS X 10.6 (Snow Leopard). The problem is that I cannot type a tilde. Instead when I press the tilde I get this character: §§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§ I cannot for the life of me figure this out, except that I vaguely remember I can asked to redetect the Mac keyboard layout for this keyboard and I think i chose the wrong one. Now I get this weird character when pressing tilde. How can I fix this? Or how can I redetect this keyboard layout? Thanks.

  Read the article

• Should you disable page file with SSD?

  - by Pyrolistical

  I've been reading this question, and it has a lot of great information. But assuming you have more than enough ram, I think page file should be disabled on SSD to extend the life time. I know you would lose the core dump on crash, but not many people need that information. From my understand without a page file as you reach the limit of your ram that might trigger thrashing on disk. But for SSDs there is no concept of thrashing, reads are fast. What do you guys think?

  Read the article

• ibm 8305-29u Sound comes from internal speaker instead of green port - Ubuntu 10.04 LTS

  - by TecBrat

  The title pretty much says it all. My experience w/ubuntu is VERY limited. I did find the system test feature and ran an audio test. It found my device as Intel 82801DB-ICH4. I wasn't getting anything. I tried a couple of things and don't really even remember what I tried, but I started getting audio (not just beeps) from the system's internal speaker. Any ideas? (I can't rule out a hardware problem. This box sat under my bed for a couple of years and it's first life was in an environment FULL of cement dust.)H

  Read the article

• Outlook 2007 Archiving through macros

  - by Balaji V

  In Outlook 2007, the Archiving options are very forbidding. I DONT want Outllok to Auto Archive, I prefer to do it manually. Having said that, I want Outlook to ARCHIVE only a selected set of folders. In older version, unchecking the "include in auto arhive" option excludes these folders. Unfortunately 2007 makes life more complicated. A. Can someone help me how to exclude a set of sub-folders from archiving while doing a manual archiving. B. Is there a way I can use Macros to archive folders, this will solve all my problems.

  Read the article

• Improving Chrome performance on OSX

  - by Giannis

  There are a number of sites that do not display properly on Safari and I need to switch to Chrome. Although when the content of the sites requires flash player, Chrome will consume a significant amount of CPU. Running more than 3 windows, will cause my MBP to overheat, start the fans, and reduce battery life way more than Safari. What I am looking for is suggestions on ways to improve performance of Chrome running flash. I know Safari is optimised for OSX, but any improvement is welcome. Following I have a demo to display the issue. I am running same youtube video on Safari 6 and Chrome 21,both updated,at the same time. Both browsers have been reseted and have no extensions. This is run on MBP 13" 2012 with 2.9 i7 running OSX 10.8.1. p.s If any additional details can help please let me know.

  Read the article

• VirtualBox / Ubuntu 10.04 Server

  - by SevenCentral

  I created a virtual machine using VirtualBox 3.2 and Ubuntu Server 10.04 x64. Everything works fine. I logged in. I mounted the VBoxGuestAdditions.iso file. However, I can't for the life of me find where in the operating system this was done so I can get the additions installed. I've tried /media, /cdrom, /mnt, etc... I'm obviously new at this. Can someone help figure out how to install the guest additions and how to locate the mounted file? Thanks.

  Read the article

• How many times can data be read from a USB flash drive?

  - by John

  While I am aware that performing writes on a USB flash drive degrades the life expectancy of the device. I have heard the quantity of writes is anywhere from 100 thousand to 10 million, but I have not heard about number of read operations. Does reading from the device count toward this total? I am interested in writing only once to a flash drive and setting it to read-only. Then reading files from the device a thousand or more times per day, but am wondering if (at say 1,000 reads per day), the flash drive will need to be replaced within 100 days (assuming a 100,000 r/w cycle lifetime)?

  Read the article

• Rewrite URL before passing to proxy Lighttpd

  - by futureelite7

  Hi, I'm trying to setup a reverse proxy in lighttpd, such that all requests (and only those requests) under /mobile/video is redirected to the / directory of a secondary web server. This is pretty easy in apache, but I can't for the life of me figure out how to do so in lighttpd. $HTTP["url"] =~ "^/wsmobile/video/" { url.rewrite-once = ( ".*" => "/test/" ) proxy.server = ( "" => ( ( "host" => "210.200.144.26", "port" => 9091 ) ) ) } I've tried using the http["url"] directive, but lighttpd simply ignore those requests and continue to pass the full url to the secondary server, which of course chokes and throws 404s. However, if I do a global rewrite then everything gets forwarded to the secondary server, which is also not what I want. How do I go about this task?

  Read the article

• Firefox extension to save tabs?

  - by emzero

  I'm looking for some Firefox (4 or 5) extension to save a group of tabs (better if can be done directly in Panorama view). What I mean by "Save tabs" is not to restore them when Firefox starts. I always have the browser opened and a LOT of tabs (work and personal life related) eating my RAM. So when I'm not working, I would want a way to save those tabs but keep them closed while I still use Firefox. So when I have to start working again, I will restore that saved tabs back again. I know I could use something like Read It Later, but I really need a way to say "hey, save this group of tabs and close them". RIL makes me do it per tab, which is annoying since I'm used to have A LOT.

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >