Search Results

Search found 2933 results on 118 pages for 'mat geek'.

Page 59/118 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• Experience your music in a whole new way with Zune for PC

  - by Matthew Guay

  Tired of the standard Media Player look and feel, and want something new and innovative?  Zune offers a fresh, new way to enjoy your music, videos, pictures, and podcasts, whether or not you own a Zune device. Microsoft started out on a new multimedia experience for PCs and mobile devices with the launch of the Zune several years ago.  The Zune devices have been well received and noted for their innovative UI, and the Zune HD’s fluid interface is the foundation for the widely anticipated Windows Phone 7.  But regardless of whether or not you have a Zune Device, you can still use the exciting new UI and services directly from your PC.  Zune for Windows is a very nice media player that offers a music and video store and wide support for multimedia formats including those used in Apple products.  And if you enjoy listening to a wide variety of music, it also offers the Zune Pass which lets you stream an unlimited number of songs to your computer and download 10 songs for keeps per month for $14.99/month. Or you can do a pre-paid music card as well.  It does all this using the new Metro UI which beautifully shows information using text in a whole new way.  Here’s a quick look at setting up and using Zune on your PC. Getting Started Download the installer (link below), and run it to begin setup.  Please note that Zune offers a separate version for computers running the 64 bit version of Windows Vista or 7, so choose it if your computer is running these. Once your download is finished, run the installer to setup Zune on your computer.  Accept the EULA when prompted. If there are any updates available, they will automatically download and install during the setup.  So, if you’re installing Zune from a disk (for example, one packaged with a Zune device), you don’t have to worry if you have the latest version.  Zune will proceed to install on your computer.   It may prompt you to restart your computer after installation; click Restart Now so you can proceed with your Zune setup.  The reboot appears to be for Zune device support, and the program ran fine otherwise without rebooting, so you could possibly skip this step if you’re not using a Zune device.  However, to be on the safe side, go ahead and reboot. After rebooting, launch Zune.  It will play a cute introduction video on first launch; press skip if you don’t want to watch it. Zune will now ask you if you want to keep the default settings or change them.  Choose Start to keep the defaults, or Settings to customize to your wishes.  Do note that the default settings will set Zune as your default media player, so click Settings if you wish to change this. If you choose to change the default settings, you can change how Zune finds and stores media on your computer.  In Windows 7, Zune will by default use your Windows 7 Libraries to manage your media, and will in fact add a new Podcasts library to Windows 7. If your media is stored on another location, such as on a server, then you can add this to the Library.  Please note that this adds the location to your system-wide library, not just the Zune player. There’s one last step.  Enter three of your favorite artists, and Zune will add Smart DJ mixes to your Quickplay list based on these.  Some less famous or popular artists may not be recognized, so you may have to try another if your choice isn’t available.  Or, you can click Skip if you don’t want to do this right now. Welcome to Zune!  This is the default first page, QuickPlay, where you can easily access your pinned and new items.   If you have a Zune account, or would like to create a new one, click Sign In on the top. Creating a new account is quick and simple, and if you’re new to Zune, you can try out a 14 day trial of Zune Pass for free if you want. Zune allows you to share your listening habits and favorites with friends or the world, but you can turn this off or change it if you like. Using Zune for Windows To access your media, click the Collection link on the top left.  Zune will show all the media you already have stored on your computer, organized by artist and album. Right-click on any album, and you choose to have Zune find album art or do a variety of other tasks with the media.   When playing media, you can view it in several unique ways.  First, the default Mix view will show related tracks to the music you’re playing from Smart DJ.  You can either play these fully if you’re a Zune Pass subscriber, or otherwise you can play 30 second previews. Then, for many popular artists, Zune will change the player background to show pictures and information in a unique way while the music is playing.  The information may range from history about the artist to the popularity of the song being played.   Zune also works as a nice viewer for the pictures on your computer. Start a slideshow, and Zune will play your pictures with nice transition effects and music from your library. Zune Store The Zune Store offers a wide variety of music, TV shows, and videos for purchase.  If you’re a Zune Pass subscriber, you can listen to or download any song without purchasing it; otherwise, you can preview a 30 second clip first. Zune also offers a wide selection of Podcasts you can subscribe to for free. Using Zune for PC with a Zune Device If you have a Zune device attached to your computer, you can easily add media files to it by simply dragging them to the Zune device icon in the left corner.  In the future, this will also work with Windows Phone 7 devices. If you have a Zune HD, you can also download and add apps to your device. Here’s the detailed information window for the weather app.  Click Download to add it to your device.   Mini Mode The Zune player generally takes up a large portion of your screen, and is actually most impressive when run maximized.  However, if you’re simply wanting to enjoy your tunes while you’re using your computer, you can use the Mini mode to still view music info and control Zune in a smaller mode.  Click the Mini Player button near the window control buttons in the top right to activate it. Now Zune will take up much less of your desktop.  This window will stay on top of other windows so you can still easily view and control it. Zune will display an image of the artist if one is available, and this shows up in Mini mode more often than it does in the full mode. And, in Windows 7, you could simply minimize Zune as you can control it directly from the taskbar thumbnail preview.   Even more controls are available from Zune’s jumplist in Windows 7.  You can directly access your Quickplay links or choose to shuffle all music without leaving the taskbar. Settings Although Zune is designed to be used without confusing menus and settings, you can tweak the program to your liking from the settings panel.  Click Settings near the top left of the window. Here you can change file storage, types, burn, metadata, and many more settings.  You can also setup Zune to stream media to your XBOX 360 if you have one.   You can also customize Zune’s look with a variety of modern backgrounds and gradients. Conclusion If you’re ready for a fresh way to enjoy your media, Zune is designed for you.  It’s innovative UI definitely sets it apart from standard media players, and is very pleasing to use.  Zune is especially nice if your computer is using XP, Vista Home Basic, or 7 Starter as these versions of Windows don’t include Media Center.  Additionally, the mini player mode is a nice touch that brings a feature of Windows 7’s Media Player to XP and Vista.  Zune is definitely one of our favorite music apps.  Try it out, and get a fresh view of your music today! Link Download Zune for Windows Similar Articles Productive Geek Tips Redeem Pre-paid Zune Card Points for Zune Marketplace MediaUpdate Your Zune Player SoftwaredoubleTwist is an iTunes Alternative that Supports Several DevicesFind Free or Cheap Indie Music at Amie StreetAmie Street Downloader Makes Purchasing Music Easier TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC

  Read the article

• VLOOKUP in Excel, part 2: Using VLOOKUP without a database

  - by Mark Virtue

  In a recent article, we introduced the Excel function called VLOOKUP and explained how it could be used to retrieve information from a database into a cell in a local worksheet.  In that article we mentioned that there were two uses for VLOOKUP, and only one of them dealt with querying databases.  In this article, the second and final in the VLOOKUP series, we examine this other, lesser known use for the VLOOKUP function. If you haven’t already done so, please read the first VLOOKUP article – this article will assume that many of the concepts explained in that article are already known to the reader. When working with databases, VLOOKUP is passed a “unique identifier” that serves to identify which data record we wish to find in the database (e.g. a product code or customer ID).  This unique identifier must exist in the database, otherwise VLOOKUP returns us an error.  In this article, we will examine a way of using VLOOKUP where the identifier doesn’t need to exist in the database at all.  It’s almost as if VLOOKUP can adopt a “near enough is good enough” approach to returning the data we’re looking for.  In certain circumstances, this is exactly what we need. We will illustrate this article with a real-world example – that of calculating the commissions that are generated on a set of sales figures.  We will start with a very simple scenario, and then progressively make it more complex, until the only rational solution to the problem is to use VLOOKUP.  The initial scenario in our fictitious company works like this:  If a salesperson creates more than $30,000 worth of sales in a given year, the commission they earn on those sales is 30%.  Otherwise their commission is only 20%.  So far this is a pretty simple worksheet: To use this worksheet, the salesperson enters their sales figures in cell B1, and the formula in cell B2 calculates the correct commission rate they are entitled to receive, which is used in cell B3 to calculate the total commission that the salesperson is owed (which is a simple multiplication of B1 and B2). The cell B2 contains the only interesting part of this worksheet – the formula for deciding which commission rate to use: the one below the threshold of $30,000, or the one above the threshold.  This formula makes use of the Excel function called IF.  For those readers that are not familiar with IF, it works like this: IF(condition,value if true,value if false) Where the condition is an expression that evaluates to either true or false.  In the example above, the condition is the expression B1<B5, which can be read as “Is B1 less than B5?”, or, put another way, “Are the total sales less than the threshold”.  If the answer to this question is “yes” (true), then we use the value if true parameter of the function, namely B6 in this case – the commission rate if the sales total was below the threshold.  If the answer to the question is “no” (false), then we use the value if false parameter of the function, namely B7 in this case – the commission rate if the sales total was above the threshold. As you can see, using a sales total of $20,000 gives us a commission rate of 20% in cell B2.  If we enter a value of $40,000, we get a different commission rate: So our spreadsheet is working. Let’s make it more complex.  Let’s introduce a second threshold:  If the salesperson earns more than $40,000, then their commission rate increases to 40%: Easy enough to understand in the real world, but in cell B2 our formula is getting more complex.  If you look closely at the formula, you’ll see that the third parameter of the original IF function (the value if false) is now an entire IF function in its own right.  This is called a nested function (a function within a function).  It’s perfectly valid in Excel (it even works!), but it’s harder to read and understand. We’re not going to go into the nuts and bolts of how and why this works, nor will we examine the nuances of nested functions.  This is a tutorial on VLOOKUP, not on Excel in general. Anyway, it gets worse!  What about when we decide that if they earn more than $50,000 then they’re entitled to 50% commission, and if they earn more than $60,000 then they’re entitled to 60% commission? Now the formula in cell B2, while correct, has become virtually unreadable.  No-one should have to write formulae where the functions are nested four levels deep!  Surely there must be a simpler way? There certainly is.  VLOOKUP to the rescue! Let’s redesign the worksheet a bit.  We’ll keep all the same figures, but organize it in a new way, a more tabular way: Take a moment and verify for yourself that the new Rate Table works exactly the same as the series of thresholds above. Conceptually, what we’re about to do is use VLOOKUP to look up the salesperson’s sales total (from B1) in the rate table and return to us the corresponding commission rate.  Note that the salesperson may have indeed created sales that are not one of the five values in the rate table ($0, $30,000, $40,000, $50,000 or $60,000).  They may have created sales of $34,988.  It’s important to note that $34,988 does not appear in the rate table.  Let’s see if VLOOKUP can solve our problem anyway… We select cell B2 (the location we want to put our formula), and then insert the VLOOKUP function from the Formulas tab: The Function Arguments box for VLOOKUP appears.  We fill in the arguments (parameters) one by one, starting with the Lookup_value, which is, in this case, the sales total from cell B1.  We place the cursor in the Lookup_value field and then click once on cell B1: Next we need to specify to VLOOKUP what table to lookup this data in.  In this example, it’s the rate table, of course.  We place the cursor in the Table_array field, and then highlight the entire rate table – excluding the headings: Next we must specify which column in the table contains the information we want our formula to return to us.  In this case we want the commission rate, which is found in the second column in the table, so we therefore enter a 2 into the Col_index_num field: Finally we enter a value in the Range_lookup field. Important:  It is the use of this field that differentiates the two ways of using VLOOKUP.  To use VLOOKUP with a database, this final parameter, Range_lookup, must always be set to FALSE, but with this other use of VLOOKUP, we must either leave it blank or enter a value of TRUE.  When using VLOOKUP, it is vital that you make the correct choice for this final parameter. To be explicit, we will enter a value of true in the Range_lookup field.  It would also be fine to leave it blank, as this is the default value: We have completed all the parameters.  We now click the OK button, and Excel builds our VLOOKUP formula for us: If we experiment with a few different sales total amounts, we can satisfy ourselves that the formula is working. Conclusion In the “database” version of VLOOKUP, where the Range_lookup parameter is FALSE, the value passed in the first parameter (Lookup_value) must be present in the database.  In other words, we’re looking for an exact match. But in this other use of VLOOKUP, we are not necessarily looking for an exact match.  In this case, “near enough is good enough”.  But what do we mean by “near enough”?  Let’s use an example:  When searching for a commission rate on a sales total of $34,988, our VLOOKUP formula will return us a value of 30%, which is the correct answer.  Why did it choose the row in the table containing 30% ?  What, in fact, does “near enough” mean in this case?  Let’s be precise: When Range_lookup is set to TRUE (or omitted), VLOOKUP will look in column 1 and match the highest value that is not greater than the Lookup_value parameter. It’s also important to note that for this system to work, the table must be sorted in ascending order on column 1! If you would like to practice with VLOOKUP, the sample file illustrated in this article can be downloaded from here. Similar Articles Productive Geek Tips Using VLOOKUP in ExcelImport Microsoft Access Data Into ExcelImport an Access Database into ExcelCopy a Group of Cells in Excel 2007 to the Clipboard as an ImageShare Access Data with Excel in Office 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition

  Read the article

• 8 Reasons Why Even Microsoft Agrees the Windows Desktop is a Nightmare

  - by Chris Hoffman

  Let’s be honest: The Windows desktop is a mess. Sure, it’s extremely powerful and has a huge software library, but it’s not a good experience for average people. It’s not even a good experience for geeks, although we tolerate it. Even Microsoft agrees about this. Microsoft’s Surface tablets with Windows RT don’t support any third-party desktop apps. They consider this a feature — users can’t install malware and other desktop junk, so the system will always be speedy and secure. Malware is Still Common Malware may not affect geeks, but it certainly continues to affect average people. Securing Windows, keeping it secure, and avoiding unsafe programs is a complex process. There are over 50 different file extensions that can contain harmful code to keep track of. It’s easy to have theoretical discussions about how malware could infect Mac computers, Android devices, and other systems. But Mac malware is extremely rare, and has  generally been caused by problem with the terrible Java plug-in. Macs are configured to only run executables from identified developers by default, whereas Windows will run everything. Android malware is talked about a lot, but Android malware is rare in the real world and is generally confined to users who disable security protections and install pirated apps. Google has also taken action, rolling out built-in antivirus-like app checking to all Android devices, even old ones running Android 2.3, via Play Services. Whatever the reason, Windows malware is still common while malware for other systems isn’t. We all know it — anyone who does tech support for average users has dealt with infected Windows computers. Even users who can avoid malware are stuck dealing with complex and nagging antivirus programs, especially since it’s now so difficult to trust Microsoft’s antivirus products. Manufacturer-Installed Bloatware is Terrible Sit down with a new Mac, Chromebook, iPad, Android tablet, Linux laptop, or even a Surface running Windows RT and you can enjoy using your new device. The system is a clean slate for you to start exploring and installing your new software. Sit down with a new Windows PC and the system is a mess. Rather than be delighted, you’re stuck reinstalling Windows and then installing the necessary drivers or you’re forced to start uninstalling useless bloatware programs one-by-one, trying to figure out which ones are actually useful. After uninstalling the useless programs, you may end up with a system tray full of icons for ten different hardware utilities anyway. The first experience of using a new Windows PC is frustration, not delight. Yes, bloatware is still a problem on Windows 8 PCs. Manufacturers can customize the Refresh image, preventing bloatware rom easily being removed. Finding a Desktop Program is Dangerous Want to install a Windows desktop program? Well, you’ll have to head to your web browser and start searching. It’s up to you, the user, to know which programs are safe and which are dangerous. Even if you find a website for a reputable program, the advertisements on that page will often try to trick you into downloading fake installers full of adware. While it’s great to have the ability to leave the app store and get software that the platform’s owner hasn’t approved — as on Android — this is no excuse for not providing a good, secure software installation experience for typical users installing typical programs. Even Reputable Desktop Programs Try to Install Junk Even if you do find an entirely reputable program, you’ll have to keep your eyes open while installing it. It will likely try to install adware, add browse toolbars, change your default search engine, or change your web browser’s home page. Even Microsoft’s own programs do this — when you install Skype for Windows desktop, it will attempt to modify your browser settings t ouse Bing, even if you’re specially chosen another search engine and home page. With Microsoft setting such an example, it’s no surprise so many other software developers have followed suit. Geeks know how to avoid this stuff, but there’s a reason program installers continue to do this. It works and tricks many users, who end up with junk installed and settings changed. The Update Process is Confusing On iOS, Android, and Windows RT, software updates come from a single place — the app store. On Linux, software updates come from the package manager. On Mac OS X, typical users’ software updates likely come from the Mac App Store. On the Windows desktop, software updates come from… well, every program has to create its own update mechanism. Users have to keep track of all these updaters and make sure their software is up-to-date. Most programs now have their act together and automatically update by default, but users who have old versions of Flash and Adobe Reader installed are vulnerable until they realize their software isn’t automatically updating. Even if every program updates properly, the sheer mess of updaters is clunky, slow, and confusing in comparison to a centralized update process. Browser Plugins Open Security Holes It’s no surprise that other modern platforms like iOS, Android, Chrome OS, Windows RT, and Windows Phone don’t allow traditional browser plugins, or only allow Flash and build it into the system. Browser plugins provide a wealth of different ways for malicious web pages to exploit the browser and open the system to attack. Browser plugins are one of the most popular attack vectors because of how many users have out-of-date plugins and how many plugins, especially Java, seem to be designed without taking security seriously. Oracle’s Java plugin even tries to install the terrible Ask toolbar when installing security updates. That’s right — the security update process is also used to cram additional adware into users’ machines so unscrupulous companies like Oracle can make a quick buck. It’s no wonder that most Windows PCs have an out-of-date, vulnerable version of Java installed. Battery Life is Terrible Windows PCs have bad battery life compared to Macs, IOS devices, and Android tablets, all of which Windows now competes with. Even Microsoft’s own Surface Pro 2 has bad battery life. Apple’s 11-inch MacBook Air, which has very similar hardware to the Surface Pro 2, offers double its battery life when web browsing. Microsoft has been fond of blaming third-party hardware manufacturers for their poorly optimized drivers in the past, but there’s no longer any room to hide. The problem is clearly Windows. Why is this? No one really knows for sure. Perhaps Microsoft has kept on piling Windows component on top of Windows component and many older Windows components were never properly optimized. Windows Users Become Stuck on Old Windows Versions Apple’s new OS X 10.9 Mavericks upgrade is completely free to all Mac users and supports Macs going back to 2007. Apple has also announced their intention that all new releases of Mac OS X will be free. In 2007, Microsoft had just shipped Windows Vista. Macs from the Windows Vista era are being upgraded to the latest version of the Mac operating system for free, while Windows PCs from the same era are probably still using Windows Vista. There’s no easy upgrade path for these people. They’re stuck using Windows Vista and maybe even the outdated Internet Explorer 9 if they haven’t installed a third-party web browser. Microsoft’s upgrade path is for these people to pay $120 for a full copy of Windows 8.1 and go through a complicated process that’s actaully a clean install. Even users of Windows 8 devices will probably have to pay money to upgrade to Windows 9, while updates for other operating systems are completely free. If you’re a PC geek, a PC gamer, or someone who just requires specialized software that only runs on Windows, you probably use the Windows desktop and don’t want to switch. That’s fine, but it doesn’t mean the Windows desktop is actually a good experience. Much of the burden falls on average users, who have to struggle with malware, bloatware, adware bundled in installers, complex software installation processes, and out-of-date software. In return, all they get is the ability to use a web browser and some basic Office apps that they could use on almost any other platform without all the hassle. Microsoft would agree with this, touting Windows RT and their new “Windows 8-style” app platform as the solution. Why else would Microsoft, a “devices and services” company, position the Surface — a device without traditional Windows desktop programs — as their mass-market device recommended for average people? This isn’t necessarily an endorsement of Windows RT. If you’re tech support for your family members and it comes time for them to upgrade, you may want to get them off the Windows desktop and tell them to get a Mac or something else that’s simple. Better yet, if they get a Mac, you can tell them to visit the Apple Store for help instead of calling you. That’s another thing Windows PCs don’t offer — good manufacturer support. Image Credit: Blanca Stella Mejia on Flickr, Collin Andserson on Flickr, Luca Conti on Flickr     

  Read the article

• HTG Reviews the CODE Keyboard: Old School Construction Meets Modern Amenities

  - by Jason Fitzpatrick

  There’s nothing quite as satisfying as the smooth and crisp action of a well built keyboard. If you’re tired of  mushy keys and cheap feeling keyboards, a well-constructed mechanical keyboard is a welcome respite from the $10 keyboard that came with your computer. Read on as we put the CODE mechanical keyboard through the paces. What is the CODE Keyboard? The CODE keyboard is a collaboration between manufacturer WASD Keyboards and Jeff Atwood of Coding Horror (the guy behind the Stack Exchange network and Discourse forum software). Atwood’s focus was incorporating the best of traditional mechanical keyboards and the best of modern keyboard usability improvements. In his own words: The world is awash in terrible, crappy, no name how-cheap-can-we-make-it keyboards. There are a few dozen better mechanical keyboard options out there. I’ve owned and used at least six different expensive mechanical keyboards, but I wasn’t satisfied with any of them, either: they didn’t have backlighting, were ugly, had terrible design, or were missing basic functions like media keys. That’s why I originally contacted Weyman Kwong of WASD Keyboards way back in early 2012. I told him that the state of keyboards was unacceptable to me as a geek, and I proposed a partnership wherein I was willing to work with him to do whatever it takes to produce a truly great mechanical keyboard. Even the ardent skeptic who questions whether Atwood has indeed created a truly great mechanical keyboard certainly can’t argue with the position he starts from: there are so many agonizingly crappy keyboards out there. Even worse, in our opinion, is that unless you’re a typist of a certain vintage there’s a good chance you’ve never actually typed on a really nice keyboard. Those that didn’t start using computers until the mid-to-late 1990s most likely have always typed on modern mushy-key keyboards and never known the joy of typing on a really responsive and crisp mechanical keyboard. Is our preference for and love of mechanical keyboards shining through here? Good. We’re not even going to try and hide it. So where does the CODE keyboard stack up in pantheon of keyboards? Read on as we walk you through the simple setup and our experience using the CODE. Setting Up the CODE Keyboard Although the setup of the CODE keyboard is essentially plug and play, there are two distinct setup steps that you likely haven’t had to perform on a previous keyboard. Both highlight the degree of care put into the keyboard and the amount of customization available. Inside the box you’ll find the keyboard, a micro USB cable, a USB-to-PS2 adapter, and a tool which you may be unfamiliar with: a key puller. We’ll return to the key puller in a moment. Unlike the majority of keyboards on the market, the cord isn’t permanently affixed to the keyboard. What does this mean for you? Aside from the obvious need to plug it in yourself, it makes it dead simple to repair your own keyboard cord if it gets attacked by a pet, mangled in a mechanism on your desk, or otherwise damaged. It also makes it easy to take advantage of the cable routing channels in on the underside of the keyboard to  route your cable exactly where you want it. While we’re staring at the underside of the keyboard, check out those beefy rubber feet. By peripherals standards they’re huge (and there is six instead of the usual four). Once you plunk the keyboard down where you want it, it might as well be glued down the rubber feet work so well. After you’ve secured the cable and adjusted it to your liking, there is one more task  before plug the keyboard into the computer. On the bottom left-hand side of the keyboard, you’ll find a small recess in the plastic with some dip switches inside: The dip switches are there to switch hardware functions for various operating systems, keyboard layouts, and to enable/disable function keys. By toggling the dip switches you can change the keyboard from QWERTY mode to Dvorak mode and Colemak mode, the two most popular alternative keyboard configurations. You can also use the switches to enable Mac-functionality (for Command/Option keys). One of our favorite little toggles is the SW3 dip switch: you can disable the Caps Lock key; goodbye accidentally pressing Caps when you mean to press Shift. You can review the entire dip switch configuration chart here. The quick-start for Windows users is simple: double check that all the switches are in the off position (as seen in the photo above) and then simply toggle SW6 on to enable the media and backlighting function keys (this turns the menu key on the keyboard into a function key as typically found on laptop keyboards). After adjusting the dip switches to your liking, plug the keyboard into an open USB port on your computer (or into your PS/2 port using the included adapter). Design, Layout, and Backlighting The CODE keyboard comes in two flavors, a traditional 87-key layout (no number pad) and a traditional 104-key layout (number pad on the right hand side). We identify the layout as traditional because, despite some modern trapping and sneaky shortcuts, the actual form factor of the keyboard from the shape of the keys to the spacing and position is as classic as it comes. You won’t have to learn a new keyboard layout and spend weeks conditioning yourself to a smaller than normal backspace key or a PgUp/PgDn pair in an unconventional location. Just because the keyboard is very conventional in layout, however, doesn’t mean you’ll be missing modern amenities like media-control keys. The following additional functions are hidden in the F11, F12, Pause button, and the 2×6 grid formed by the Insert and Delete rows: keyboard illumination brightness, keyboard illumination on/off, mute, and then the typical play/pause, forward/backward, stop, and volume +/- in Insert and Delete rows, respectively. While we weren’t sure what we’d think of the function-key system at first (especially after retiring a Microsoft Sidewinder keyboard with a huge and easily accessible volume knob on it), it took less than a day for us to adapt to using the Fn key, located next to the right Ctrl key, to adjust our media playback on the fly. Keyboard backlighting is a largely hit-or-miss undertaking but the CODE keyboard nails it. Not only does it have pleasant and easily adjustable through-the-keys lighting but the key switches the keys themselves are attached to are mounted to a steel plate with white paint. Enough of the light reflects off the interior cavity of the keys and then diffuses across the white plate to provide nice even illumination in between the keys. Highlighting the steel plate beneath the keys brings us to the actual construction of the keyboard. It’s rock solid. The 87-key model, the one we tested, is 2.0 pounds. The 104-key is nearly a half pound heavier at 2.42 pounds. Between the steel plate, the extra-thick PCB board beneath the steel plate, and the thick ABS plastic housing, the keyboard has very solid feel to it. Combine that heft with the previously mentioned thick rubber feet and you have a tank-like keyboard that won’t budge a millimeter during normal use. Examining The Keys This is the section of the review the hardcore typists and keyboard ninjas have been waiting for. We’ve looked at the layout of the keyboard, we’ve looked at the general construction of it, but what about the actual keys? There are a wide variety of keyboard construction techniques but the vast majority of modern keyboards use a rubber-dome construction. The key is floated in a plastic frame over a rubber membrane that has a little rubber dome for each key. The press of the physical key compresses the rubber dome downwards and a little bit of conductive material on the inside of the dome’s apex connects with the circuit board. Despite the near ubiquity of the design, many people dislike it. The principal complaint is that dome keyboards require a complete compression to register a keystroke; keyboard designers and enthusiasts refer to this as “bottoming out”. In other words, the register the “b” key, you need to completely press that key down. As such it slows you down and requires additional pressure and movement that, over the course of tens of thousands of keystrokes, adds up to a whole lot of wasted time and fatigue. The CODE keyboard features key switches manufactured by Cherry, a company that has manufactured key switches since the 1960s. Specifically the CODE features Cherry MX Clear switches. These switches feature the same classic design of the other Cherry switches (such as the MX Blue and Brown switch lineups) but they are significantly quieter (yes this is a mechanical keyboard, but no, your neighbors won’t think you’re firing off a machine gun) as they lack the audible click found in most Cherry switches. This isn’t to say that they keyboard doesn’t have a nice audible key press sound when the key is fully depressed, but that the key mechanism isn’t doesn’t create a loud click sound when triggered. One of the great features of the Cherry MX clear is a tactile “bump” that indicates the key has been compressed enough to register the stroke. For touch typists the very subtle tactile feedback is a great indicator that you can move on to the next stroke and provides a welcome speed boost. Even if you’re not trying to break any word-per-minute records, that little bump when pressing the key is satisfying. The Cherry key switches, in addition to providing a much more pleasant typing experience, are also significantly more durable than dome-style key switch. Rubber dome switch membrane keyboards are typically rated for 5-10 million contacts whereas the Cherry mechanical switches are rated for 50 million contacts. You’d have to write the next War and Peace  and follow that up with A Tale of Two Cities: Zombie Edition, and then turn around and transcribe them both into a dozen different languages to even begin putting a tiny dent in the lifecycle of this keyboard. So what do the switches look like under the classicly styled keys? You can take a look yourself with the included key puller. Slide the loop between the keys and then gently beneath the key you wish to remove: Wiggle the key puller gently back and forth while exerting a gentle upward pressure to pop the key off; You can repeat the process for every key, if you ever find yourself needing to extract piles of cat hair, Cheeto dust, or other foreign objects from your keyboard. There it is, the naked switch, the source of that wonderful crisp action with the tactile bump on each keystroke. The last feature worthy of a mention is the N-key rollover functionality of the keyboard. This is a feature you simply won’t find on non-mechanical keyboards and even gaming keyboards typically only have any sort of key roller on the high-frequency keys like WASD. So what is N-key rollover and why do you care? On a typical mass-produced rubber-dome keyboard you cannot simultaneously press more than two keys as the third one doesn’t register. PS/2 keyboards allow for unlimited rollover (in other words you can’t out type the keyboard as all of your keystrokes, no matter how fast, will register); if you use the CODE keyboard with the PS/2 adapter you gain this ability. If you don’t use the PS/2 adapter and use the native USB, you still get 6-key rollover (and the CTRL, ALT, and SHIFT don’t count towards the 6) so realistically you still won’t be able to out type the computer as even the more finger twisting keyboard combos and high speed typing will still fall well within the 6-key rollover. The rollover absolutely doesn’t matter if you’re a slow hunt-and-peck typist, but if you’ve read this far into a keyboard review there’s a good chance that you’re a serious typist and that kind of quality construction and high-number key rollover is a fantastic feature.  The Good, The Bad, and the Verdict We’ve put the CODE keyboard through the paces, we’ve played games with it, typed articles with it, left lengthy comments on Reddit, and otherwise used and abused it like we would any other keyboard. The Good: The construction is rock solid. In an emergency, we’re confident we could use the keyboard as a blunt weapon (and then resume using it later in the day with no ill effect on the keyboard). The Cherry switches are an absolute pleasure to type on; the Clear variety found in the CODE keyboard offer a really nice middle-ground between the gun-shot clack of a louder mechanical switch and the quietness of a lesser-quality dome keyboard without sacrificing quality. Touch typists will love the subtle tactile bump feedback. Dip switch system makes it very easy for users on different systems and with different keyboard layout needs to switch between operating system and keyboard layouts. If you’re investing a chunk of change in a keyboard it’s nice to know you can take it with you to a different operating system or “upgrade” it to a new layout if you decide to take up Dvorak-style typing. The backlighting is perfect. You can adjust it from a barely-visible glow to a blazing light-up-the-room brightness. Whatever your intesity preference, the white-coated steel backplate does a great job diffusing the light between the keys. You can easily remove the keys for cleaning (or to rearrange the letters to support a new keyboard layout). The weight of the unit combined with the extra thick rubber feet keep it planted exactly where you place it on the desk. The Bad: While you’re getting your money’s worth, the $150 price tag is a shock when compared to the $20-60 price tags you find on lower-end keyboards. People used to large dedicated media keys independent of the traditional key layout (such as the large buttons and volume controls found on many modern keyboards) might be off put by the Fn-key style media controls on the CODE. The Verdict: The keyboard is clearly and heavily influenced by the needs of serious typists. Whether you’re a programmer, transcriptionist, or just somebody that wants to leave the lengthiest article comments the Internet has ever seen, the CODE keyboard offers a rock solid typing experience. Yes, $150 isn’t pocket change, but the quality of the CODE keyboard is so high and the typing experience is so enjoyable, you’re easily getting ten times the value you’d get out of purchasing a lesser keyboard. Even compared to other mechanical keyboards on the market, like the Das Keyboard, you’re still getting more for your money as other mechanical keyboards don’t come with the lovely-to-type-on Cherry MX Clear switches, back lighting, and hardware-based operating system keyboard layout switching. If it’s in your budget to upgrade your keyboard (especially if you’ve been slogging along with a low-end rubber-dome keyboard) there’s no good reason to not pickup a CODE keyboard. Key animation courtesy of Geekhack.org user Lethal Squirrel.       

  Read the article

• Jolicloud is a Nifty New OS for Your Netbook

  - by Matthew Guay

  Want to breathe new life into your netbook?  Here’s a quick look at Jolicloud, a unique new Linux based OS that lets you use your netbook in a whole new way. Netbooks have been an interesting category of computers.  When they were first released, most netbooks came with a stripped down Linux based operating system designed to let you easily access the internet first and foremost.  Consumers wanted more from their netbooks, so full OSes such as Windows XP and Ubuntu became the standard on netbooks.  Microsoft worked hard to get Windows 7 working great on netbooks, and today most netbooks run Windows 7 great.  But the Linux community hasn’t stood still either, and Jolicloud is proof of that.  Jolicloud is a unique OS designed to bring the best of both webapps and standard programs to your netbook.   Keep reading to see if this is the perfect netbook OS for you. Getting Started Installing Jolicloud on your netbook is easy thanks to a the Jolicloud Express installer for Windows.  Since many netbooks run Windows by default, this makes it easy to install Jolicloud.  Plus, your Windows install is left untouched, so you can still easily access all your Windows files and programs. Download and run the roughly 700Mb installer (link below) just as a normal installer in Windows. This will first extract the needed files. Click Get started to install Jolicloud on your netbook. Enter a username, password, and nickname for your computer.  Please note that the username must be all lowercase, and the nickname should not contain spaces or special characters.   Now you can review the default installation settings.  By default it will take up 39Gb and install on your C:\ drive in English.  If you wish to change this, click Change. We chose to install it on the D: drive on this netbook, as its harddrive was already partitioned into two parts.  Click Save when your settings are all correct, and then click Next in the previous window. Jolicloud will prepare for the installation.  This took about 5 minutes in our test.  Click Next when this is finished. Click Restart now to install and run Jolicloud. When your netbook reboots, it will initialize the Jolicloud setup. It will then automatically finish the installation.  Just sit back and wait; there’s nothing for you to do right now.  The installation took about 20 minutes in our test. Jolicloud will automatically reboot when the setup is finished. Once it’s rebooted, you’re ready to go!  Enter the username, then the password, that you chose earlier when you were installing Jolicloud from Windows. Welcome to your Jolicloud desktop! Hardware Support We installed Jolicloud on a Samsung N150 netbook with an Atom N450 processor, 1Gb Ram, 250Gb harddrive, and WiFi b/g/n with Bluetooth.  Amazingly, once Jolicloud was installed, everything was ready to use.  No drivers to install, no settings to hassle with, it was all installed and set up perfectly.  Power settings worked great, and closing the netbook put it to sleep just like in Windows. WiFi drivers have typically been difficult to find and install on Linux, but Jolicloud had our netbook’s wifi working immediately.  To get online, simply click the Wireless icon on the top right, and select the wireless network you want to connect to. Jolicloud will let you know when it is signed on. Wired Lan networking was also seamless; simply connect your cable and you’re ready to go.  The webcam and touchpad also worked perfectly directly.  The only thing missing was multitouch; this touchpad has two finger scroll, pinch zoom, and other nice multitouch features in Windows, but in Julicloud it only functioned as a standard touchpad.  It did have tap to click activated by default, as well as right-side scrolling, which is nice. Jolicloud also supported our video card without any extra work.  The native resolution was already selected, and the only problem we had with the screen was that there was no apparent way to change the brightness.  This is not a major problem, but would be nice to have.  The Samsung N150 has Intel GMA3150 integrated graphics, and Jolicloud promises 1080p HD video on it.  It did playback 720p H.264 video flawlessly without installing anything extra, but it stuttered on full 1080p HD (which is the exact same as this netbook’s video playback in Windows 7 – 720p works great, but it stutters on 1080p).  We would be excited to see full HD on this netbook, but 720p is definitely fine for most stuff.   Jolicloud supports a wide range of netbooks, and based on our experience we would expect it to work as good on any supported hardware.  Check out the list of supported netbooks to see if your netbook is supported; if not, it still may work but you may have to install special drivers. Jolicloud’s performance was very similar to Windows 7 on our netbook.  It boots in about 30 seconds, and apps load fairly quickly.  In general, we couldn’t tell much difference in performance between Jolicloud and Windows 7, though this isn’t a problem since Windows 7 runs great on the current generation of netbooks. Using Jolicloud Ready to start putting Jolicloud to use?  Your fresh Jolicloud install you can run several built-in apps, such as Firefox, a calculator, and the chat client Pidgin.  It also has a media player and file viewer installed, so you can play MP3s or MPG videos, or read PDF ebooks without installing anything extra.  It also has Flash player installed so you can watch videos online easily. You can also directly access all of your files from the right side of your home screen.  You can even access your Windows files; in our test, the 116.9 GB Media was C: from Windows.  Select it to browse and open any file you had saved in Windows. You may need to enter your password to access it. Once you’re authenticated it, you’ll see all of your Windows files and folders.  Your User files (Documents, Music, Videos, etc.) will be in the Users folder. And, you can easily add files from removable media such as USB flash drives and memory cards.  Jolicloud recognized a flash drive we tested with no trouble at all. Add new apps But, the best part about Jolicloud is that it makes it very easy to install new apps.  Click the Get Started button on your homescreen. You’ll first need to create an account.  You can then use this same account on another netbook if you wish, and your settings will automatically be synced between the two. You can either signup using your Facebook account, …or you can sign up the traditional way with your email address, name, and password.  If you sign up this way, you will need to confirm your email address before your account will be finished. Now, choose your netbook model from the list, and enter a name for your computer. And that’s it!  You’ll now see the Jolicloud dashboard, which will show you updates and notifications from friends who also use Jolicloud. Click the App directory to find new apps for your netbook.  Here you will find a variety of webapps, such as Gmail, along with native applications, such as Skype, that you can install on your netbook.  Simply click the Install button on the right to add the app to your netbook. You will be prompted to enter your system password, and then the app will install without any further input.   Once an app is installed, a check mark will appear beside its name.  You can remove it by clicking the Remove button, and it will uninstall seamlessly. Webapps, such as Gmail, actually run in in a Chrome-powered window that lets the webapp run full screen.  This gives the webapps a native feel, but actually they’re just running the same as they would in a standard web browser.   The Jolicloud Interface Most apps run maximized, and there is no way to run them smaller.  This in general works good, since with small screens most apps need to run full-screen anyhow. Smaller apps, such as a calculator or the Pidgin chat client, run in a window just like they do on other operating systems. You can switch to another app that’s running by selecting it’s icon on the top left, or you can go back to the home screen by clicking the home screen.  If you’re finished with an program, simply click the red X button on the top right of the window when you’re running it. Or, you can switch between programs using standard keyboard shortcuts such as Alt-tab. The default page on the home screen is the favorites page, and all of your other programs are orginized in their own sections on the left hand side.  But, if you want to add one of these to your favorites page, simply right-click on it and select Add to Favorites. When you’re done for the day, you can simply close your netbook to put it to sleep.  Or, if you want to shut down, just press the Quit button on the bottom right of the home screen and then select Shut Down. Booting Jolicloud When you install Jolicloud, it will set itself as the default operating system.  Now, when you boot your netbook, it will show you a list of installed operating systems.  You can select either Windows or Jolicloud, but if you don’t make a selection it will boot into Jolicloud after waiting 10 seconds. If you’d perfer to boot into Windows by default, you can easily change this.  First, boot your netbook in to Windows.  Open the start menu, right-click on the Computer button, and select Properties.   Click the “Advanced system settings” link on the left side. Click the Settings button in the Startup and Recovery section. Now, select Windows as the default operating system, and click Ok.  Your netbook will now boot into Windows by default, but will give you 10 seconds to choose to boot into Jolicloud when you start your computer. Or, if you decided you don’t want Jolicloud, you can easily uninstall it from within Windows. Please note that this will also remove any files you may have saved in Jolicloud, so be sure to copy them to your Windows drive before uninstalling. To uninstall Jolicloud from within Windows, open Control Panel, and select Uninstall a Program. Scroll down to select Jolicloud, and click Uninstall/Change. Click Yes to confirm that you want to uninstall Jolicloud. After a few moments, it will let you know that Jolicloud has been uninstalled.  You’re netbook is now back the same as it was before you installed Jolicloud, with only Windows installed. Closing Whether you’re wanting to replace your current OS on your netbook or would simply like to try out a fresh new Linux version on your netbook, Jolicloud is a great option for you.  We were very impressed by it’s solid hardware support and the ease of installing new apps in Jolicloud.  Rather than simply giving us a standard OS, Jolicloud offers a unique way to use your netbook with native programs and webapps.  And whether you’re an IT pro or are a new computer user, Jolicloud was easy enough to use that anyone can do it.  Give it a try, and let us know what your favorite netbook OS is! Link Download Jolicloud for your netbook Similar Articles Productive Geek Tips How To Change XSplash Themes in Ubuntu 9.10Verify the Integrity of Windows Vista System FilesMonitor Multiple Logs in a Single Shell with MultiTail for LinuxHide Some or All of the GUI Bars in FirefoxAsk the Readers: Do You Use a Laptop, Desktop, or Both? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Stop In The Name Of Love (Firefox addon) Chitika iPad Labs Gives Live iPad Sale Stats Heaven & Hell Finder Icon Using TrueCrypt to Secure Your Data Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically

  Read the article

• Working with PivotTables in Excel

  - by Mark Virtue

  PivotTables are one of the most powerful features of Microsoft Excel.  They allow large amounts of data to be analyzed and summarized in just a few mouse clicks. In this article, we explore PivotTables, understand what they are, and learn how to create and customize them. Note:  This article is written using Excel 2010 (Beta).  The concept of a PivotTable has changed little over the years, but the method of creating one has changed in nearly every iteration of Excel.  If you are using a version of Excel that is not 2010, expect different screens from the ones you see in this article. A Little History In the early days of spreadsheet programs, Lotus 1-2-3 ruled the roost.  Its dominance was so complete that people thought it was a waste of time for Microsoft to bother developing their own spreadsheet software (Excel) to compete with Lotus.  Flash-forward to 2010, and Excel’s dominance of the spreadsheet market is greater than Lotus’s ever was, while the number of users still running Lotus 1-2-3 is approaching zero.  How did this happen?  What caused such a dramatic reversal of fortunes? Industry analysts put it down to two factors:  Firstly, Lotus decided that this fancy new GUI platform called “Windows” was a passing fad that would never take off.  They declined to create a Windows version of Lotus 1-2-3 (for a few years, anyway), predicting that their DOS version of the software was all anyone would ever need.  Microsoft, naturally, developed Excel exclusively for Windows.  Secondly, Microsoft developed a feature for Excel that Lotus didn’t provide in 1-2-3, namely PivotTables.  The PivotTables feature, exclusive to Excel, was deemed so staggeringly useful that people were willing to learn an entire new software package (Excel) rather than stick with a program (1-2-3) that didn’t have it.  This one feature, along with the misjudgment of the success of Windows, was the death-knell for Lotus 1-2-3, and the beginning of the success of Microsoft Excel. Understanding PivotTables So what is a PivotTable, exactly? Put simply, a PivotTable is a summary of some data, created to allow easy analysis of said data.  But unlike a manually created summary, Excel PivotTables are interactive.  Once you have created one, you can easily change it if it doesn’t offer the exact insights into your data that you were hoping for.  In a couple of clicks the summary can be “pivoted” – rotated in such a way that the column headings become row headings, and vice versa.  There’s a lot more that can be done, too.  Rather than try to describe all the features of PivotTables, we’ll simply demonstrate them… The data that you analyze using a PivotTable can’t be just any data – it has to be raw data, previously unprocessed (unsummarized) – typically a list of some sort.  An example of this might be the list of sales transactions in a company for the past six months. Examine the data shown below: Notice that this is not raw data.  In fact, it is already a summary of some sort.  In cell B3 we can see $30,000, which apparently is the total of James Cook’s sales for the month of January.  So where is the raw data?  How did we arrive at the figure of $30,000?  Where is the original list of sales transactions that this figure was generated from?  It’s clear that somewhere, someone must have gone to the trouble of collating all of the sales transactions for the past six months into the summary we see above.  How long do you suppose this took?  An hour?  Ten?  Probably. If we were to track down the original list of sales transactions, it might look something like this: You may be surprised to learn that, using the PivotTable feature of Excel, we can create a monthly sales summary similar to the one above in a few seconds, with only a few mouse clicks.  We can do this – and a lot more too! How to Create a PivotTable First, ensure that you have some raw data in a worksheet in Excel.  A list of financial transactions is typical, but it can be a list of just about anything:  Employee contact details, your CD collection, or fuel consumption figures for your company’s fleet of cars. So we start Excel… …and we load such a list… Once we have the list open in Excel, we’re ready to start creating the PivotTable. Click on any one single cell within the list: Then, from the Insert tab, click the PivotTable icon: The Create PivotTable box appears, asking you two questions:  What data should your new PivotTable be based on, and where should it be created?  Because we already clicked on a cell within the list (in the step above), the entire list surrounding that cell is already selected for us ($A$1:$G$88 on the Payments sheet, in this example).  Note that we could select a list in any other region of any other worksheet, or even some external data source, such as an Access database table, or even a MS-SQL Server database table.  We also need to select whether we want our new PivotTable to be created on a new worksheet, or on an existing one.  In this example we will select a new one: The new worksheet is created for us, and a blank PivotTable is created on that worksheet: Another box also appears:  The PivotTable Field List.  This field list will be shown whenever we click on any cell within the PivotTable (above): The list of fields in the top part of the box is actually the collection of column headings from the original raw data worksheet.  The four blank boxes in the lower part of the screen allow us to choose the way we would like our PivotTable to summarize the raw data.  So far, there is nothing in those boxes, so the PivotTable is blank.  All we need to do is drag fields down from the list above and drop them in the lower boxes.  A PivotTable is then automatically created to match our instructions.  If we get it wrong, we only need to drag the fields back to where they came from and/or drag new fields down to replace them. The Values box is arguably the most important of the four.  The field that is dragged into this box represents the data that needs to be summarized in some way (by summing, averaging, finding the maximum, minimum, etc).  It is almost always numerical data.  A perfect candidate for this box in our sample data is the “Amount” field/column.  Let’s drag that field into the Values box: Notice that (a) the “Amount” field in the list of fields is now ticked, and “Sum of Amount” has been added to the Values box, indicating that the amount column has been summed. If we examine the PivotTable itself, we indeed find the sum of all the “Amount” values from the raw data worksheet: We’ve created our first PivotTable!  Handy, but not particularly impressive.  It’s likely that we need a little more insight into our data than that. Referring to our sample data, we need to identify one or more column headings that we could conceivably use to split this total.  For example, we may decide that we would like to see a summary of our data where we have a row heading for each of the different salespersons in our company, and a total for each.  To achieve this, all we need to do is to drag the “Salesperson” field into the Row Labels box: Now, finally, things start to get interesting!  Our PivotTable starts to take shape….   With a couple of clicks we have created a table that would have taken a long time to do manually. So what else can we do?  Well, in one sense our PivotTable is complete.  We’ve created a useful summary of our source data.  The important stuff is already learned!  For the rest of the article, we will examine some ways that more complex PivotTables can be created, and ways that those PivotTables can be customized. First, we can create a two-dimensional table.  Let’s do that by using “Payment Method” as a column heading.  Simply drag the “Payment Method” heading to the Column Labels box: Which looks like this: Starting to get very cool! Let’s make it a three-dimensional table.  What could such a table possibly look like?  Well, let’s see… Drag the “Package” column/heading to the Report Filter box: Notice where it ends up…. This allows us to filter our report based on which “holiday package” was being purchased.  For example, we can see the breakdown of salesperson vs payment method for all packages, or, with a couple of clicks, change it to show the same breakdown for the “Sunseekers” package: And so, if you think about it the right way, our PivotTable is now three-dimensional.  Let’s keep customizing… If it turns out, say, that we only want to see cheque and credit card transactions (i.e. no cash transactions), then we can deselect the “Cash” item from the column headings.  Click the drop-down arrow next to Column Labels, and untick “Cash”: Let’s see what that looks like…As you can see, “Cash” is gone. Formatting This is obviously a very powerful system, but so far the results look very plain and boring.  For a start, the numbers that we’re summing do not look like dollar amounts – just plain old numbers.  Let’s rectify that. A temptation might be to do what we’re used to doing in such circumstances and simply select the whole table (or the whole worksheet) and use the standard number formatting buttons on the toolbar to complete the formatting.  The problem with that approach is that if you ever change the structure of the PivotTable in the future (which is 99% likely), then those number formats will be lost.  We need a way that will make them (semi-)permanent. First, we locate the “Sum of Amount” entry in the Values box, and click on it.  A menu appears.  We select Value Field Settings… from the menu: The Value Field Settings box appears. Click the Number Format button, and the standard Format Cells box appears: From the Category list, select (say) Accounting, and drop the number of decimal places to 0.  Click OK a few times to get back to the PivotTable… As you can see, the numbers have been correctly formatted as dollar amounts. While we’re on the subject of formatting, let’s format the entire PivotTable.  There are a few ways to do this.  Let’s use a simple one… Click the PivotTable Tools/Design tab: Then drop down the arrow in the bottom-right of the PivotTable Styles list to see a vast collection of built-in styles: Choose any one that appeals, and look at the result in your PivotTable:   Other Options We can work with dates as well.  Now usually, there are many, many dates in a transaction list such as the one we started with.  But Excel provides the option to group data items together by day, week, month, year, etc.  Let’s see how this is done. First, let’s remove the “Payment Method” column from the Column Labels box (simply drag it back up to the field list), and replace it with the “Date Booked” column: As you can see, this makes our PivotTable instantly useless, giving us one column for each date that a transaction occurred on – a very wide table! To fix this, right-click on any date and select Group… from the context-menu: The grouping box appears.  We select Months and click OK: Voila!  A much more useful table: (Incidentally, this table is virtually identical to the one shown at the beginning of this article – the original sales summary that was created manually.) Another cool thing to be aware of is that you can have more than one set of row headings (or column headings): …which looks like this…. You can do a similar thing with column headings (or even report filters). Keeping things simple again, let’s see how to plot averaged values, rather than summed values. First, click on “Sum of Amount”, and select Value Field Settings… from the context-menu that appears: In the Summarize value field by list in the Value Field Settings box, select Average: While we’re here, let’s change the Custom Name, from “Average of Amount” to something a little more concise.  Type in something like “Avg”: Click OK, and see what it looks like.  Notice that all the values change from summed totals to averages, and the table title (top-left cell) has changed to “Avg”: If we like, we can even have sums, averages and counts (counts = how many sales there were) all on the same PivotTable! Here are the steps to get something like that in place (starting from a blank PivotTable): Drag “Salesperson” into the Column Labels Drag “Amount” field down into the Values box three times For the first “Amount” field, change its custom name to “Total” and it’s number format to Accounting (0 decimal places) For the second “Amount” field, change its custom name to “Average”, its function to Average and it’s number format to Accounting (0 decimal places) For the third “Amount” field, change its name to “Count” and its function to Count Drag the automatically created field from Column Labels to Row Labels Here’s what we end up with: Total, average and count on the same PivotTable! Conclusion There are many, many more features and options for PivotTables created by Microsoft Excel – far too many to list in an article like this.  To fully cover the potential of PivotTables, a small book (or a large website) would be required.  Brave and/or geeky readers can explore PivotTables further quite easily:  Simply right-click on just about everything, and see what options become available to you.  There are also the two ribbon-tabs: PivotTable Tools/Options and Design.  It doesn’t matter if you make a mistake – it’s easy to delete the PivotTable and start again – a possibility old DOS users of Lotus 1-2-3 never had. We’ve included an Excel that should work with most versions of Excel, so you can download to practice your PivotTable skills. Download Our Practice Excel File Similar Articles Productive Geek Tips Magnify Selected Cells In Excel 2007Share Access Data with Excel in Office 2010Make Excel 2007 Print Gridlines In Workbook FileMake Excel 2007 Always Save in Excel 2003 FormatConvert Older Excel Documents to Excel 2007 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users Get News Quick and Precise With Newser Scan for Viruses in Ubuntu using ClamAV Replace Your Windows Task Manager With System Explorer

  Read the article

• One row is skipped each time the program scans a matrix from file !

  - by ZaZu

  Hello there, I had this code working yesterday, but it seems like I edited it a bit and lost the working version. I cant get this to work anymore. I basically want to scan a matrix from a .txt file. But each time it scans the first row, the second one is skipped, and it reads the third instead :( Here is my code : for(i=0;i<=test->rowmat1;i++){ for(j=0;j<=test->colmat1;j++){ fscanf(fin,"%f\t",&test->mat[i][j]); } fscanf(fin,"%*[^\n]",&test->mat[i][j]); } For example, for a matrix of : 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00 11.00 12.00 If I extract 3 rows and 3 cols, I get : 1.00 2.00 3.00 7.00 8.00 9.00 Then fails, it wants to skip over the second line but there is nothing after 10 11 12 Why did it stop working ? What do I have wrong ? Please help, Thanks in advance.

  Read the article

• Transposing a matrix

  - by ZaZu

  Hello, I want to transpose a matrix, its a very easy task but its not working with me : int testtranspose(testing *test,testing *test2){ int i,j; (*test2).colsmat2=(*test).rowsmat1; (*test2).rowsmat2=(*test).colsmat1 for(i=0;i<(*test).rowsmat1;i++){ for(j=0;j<(*test).colsmat1;j++){ ((*test2).mat[i][j])=((*test).mat[i][j]); } printf("\n"); } } I thought this is the correct method of doing it, but apparently for a matrix such as : 1 2 3 4 5 6 7 8 I get : 1 2 0 0 3 4 0 0 What is the problem ? Please help, Thanks !

  Read the article

• regex and javascript, some matches disappear !

  - by dader51

  Here is the code : > var reg = new RegExp(" hel.lo ", 'g'); > > var str = " helalo helblo helclo heldlo "; > > var mat = str.match(reg); > > alert(mat); It alerts "helalo, helclo", but i expect it to be "helalo, helblo, helclo, heldlo" . Only the half of them matches, I guess that's because of the space wich count only once. So I tried to double every space before processing, but in some case it's not enough. I'm looking for an explanation, and a solution. Thx

  Read the article

• Memory leaks getting sub-images from video (cvGetSubRect)

  - by dnul

  Hi, i'm trying to do video windowing that is: show all frames from a video and also some sub-image from each frame. This sub-image can change size and be taken from a different position of the original frame. So , the code i've written does basically this: cvQueryFrame to get a new image from the video Create a new IplImage (img) with sub-image dimensions ( window.height,window.width) Create a new Cvmat (mat) with sub-image dimensions ( window.height,window.width) CvGetSubRect(originalImage,mat,window) seizes the sub-image transform Mat (cvMat) to img (IplImage) using cvGetImage my problem is that for each frame i create new IplImage and cvMat which take a lot of memory and when i try to free the allocated memory I get a segmentation fault or in the case of the CvMat the allocated space does not get free (valgrind keeps telling me its definetly lost space). the following code does it: int main(void){ CvCapture* capture; CvRect window; CvMat * tmp; //window size window.x=0;window.y=0;window.height=100;window.width=100; IplImage * src=NULL,*bk=NULL,* sub=NULL; capture=cvCreateFileCapture( "somevideo.wmv"); while((src=cvQueryFrame(capture))!=NULL){ cvShowImage("common",src); //get sub-image sub=cvCreateImage(cvSize(window.height,window.width),8,3); tmp =cvCreateMat(window.height, window.width,CV_8UC1); cvGetSubRect(src, tmp , window); sub=cvGetImage(tmp, sub); cvShowImage("Window",sub); //free space if(bk!=NULL) cvReleaseImage(&bk); bk=sub; cvReleaseMat(&tmp); cvWaitKey(20); //window dimensions changes window.width++; window.height++; } } cvReleaseMat(&tmp); does not seem to have any effect on the total amount of lost memory, valgrind reports the same amount of "definetly lost" memory if i comment or uncomment this line. cvReleaseImage(&bk); produces a segmentation fault. notice i'm trying to free the previous sub-frame which i'm backing up in the bk variable. If i comment this line the program runs smoothly but with lots of memory leaks I really need to get rid of memory leaks, can anyone explain me how to correct this or even better how to correctly perform image windowing? Thank you

  Read the article

• Parenting Opengl with Groups in LibGDX

  - by Rudy_TM

  I am trying to make an object child of a Group, but this object has a draw method that calls opengl to draw in the screen. Its class its this public class OpenGLSquare extends Actor { private static final ImmediateModeRenderer renderer = new ImmediateModeRenderer10(); private static Matrix4 matrix = null; private static Vector2 temp = new Vector2(); public static void setMatrix4(Matrix4 mat) { matrix = mat; } @Override public void draw(SpriteBatch batch, float arg1) { // TODO Auto-generated method stub renderer.begin(matrix, GL10.GL_TRIANGLES); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y0, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y1, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x1, y0, 0f); renderer.color(color.r, color.g, color.b, color.a); renderer.vertex(x0, y0, 0f); renderer.end(); } } In my screen class I have this, i call it in the constructor MyGroupClass spriteLab = new MyGroupClass(spriteSheetLab); OpenGLSquare square = new OpenGLSquare(); square.setX0(100); square.setY0(200); square.setX1(400); square.setY1(280); square.color.set(Color.BLUE); square.setSize(); //spriteLab.addActorAt(0, clock); spriteLab.addActor(square); stage.addActor(spriteLab); And the render in the screen I have @Override public void render(float arg0) { this.gl.glClear(GL10.GL_COLOR_BUFFER_BIT |GL10.GL_DEPTH_BUFFER_BIT); stage.draw(); stage.act(Gdx.graphics.getDeltaTime()); } The problem its that when i use opengl with parent, it resets all the other chldren to position 0,0 and the opengl renderer paints the square in the exact position of the screen and not relative to the parent. I tried using batch.enableBlending() and batch.disableBlending() that fixes the position problem of the other children, but not the relative position of the opengl drawing and it also puts alpha to the glDrawing. What am i doing wrong?:/

  Read the article

• Parrallels lance son Desktop Upgrade to Windows 7, pour migrer simplement vers le nouvel OS de Micro

  Parrallels lance son Desktop Upgrade to Windows 7, pour migrer simplement vers le nouvel OS de Microsoft Lors de la conférence de presse bilan d'hier matin, retraçant les résultats des six premiers mois de commercialisation de Windows 7, l'éditeur Parallels a annoncé la sortie de la solution Parallels Desktop Upgrade to Windows 7 : « L'arrivée de Parallels Desktop Upgrade to Windows 7 s'inscrit dans la stratégie de Parallels visant à faire profiter ses clients des meilleures fonctionnalités de leur système en s'affranchissant des contraintes mat...

  Read the article

• Permissions to Search on SQL - MOSS 2007

  - by spt.geek

  How to provide permissions to Search account on SQL Database?

  Read the article

• Jquery TimePicker : How to dynamically change parameters

  - by mad.geek

  I am using a Jquery Timepicker . I have two input fields - to Accept times . <input id="startTime" size="30" type="text" /> <input id="endTime" size="30" type="text" /> I am using a Jquery UI timer as per documentation here - http://jonthornton.github.com/jquery-timepicker/ $('#startTime').timepicker({ 'minTime': '6:00am', 'maxTime': '11:30pm', 'onSelect': function() { //change the 'minTime parameter of #endTime <--- how do I do this ? } }); $('#endTime').timepicker({ 'minTime': '2:00pm', 'maxTime': '11:30pm', 'showDuration': true }); I want that when the first timePicker is selected , the 'minTime' parameter for the second gets changed . Basically I am trying to collect the start time and end time for certain activity . And I want that the second input box shows the options from the value of the first input field (start time ) itself .

  Read the article

• Javascript error when attempting to open a modal window in a modal window

  - by The Sheek Geek

  The application is running on a windows server 2003 box using asp.net 2.0 and is an IE specific web app. There is a button that opens a form in an iframe using showModalDialog(...) from a function call located in the javascript. Here is an example of the fucntion: function ShowBusinessHoursSubForm( source ) { var retval = window.showModalDialog("htm/" + locLocaleID + "/SubFormHostFrame.htm", source, "dialogWidth:265px;dialogHeight:261px;help:no;scroll:no;status:no;"); } The host frame is loading an aspx page which contains the actual form that is being used. On the form that is opened there is a button that, when clicked, submits changed to the form. However, if no changed were made before the form was submitted, another modal window pops up stating that there were no changed to the form. This modal window is opened through registration of some javascript in the button click event. The code is as follows (C#): string l_S_ErrorScript = "<script type='text/javascript' language='javascript'>window.showModalDialog('htm/" + l_S_Culture + "/NotChangedErrorDialog.htm', '../../" + l_S_SkinPath + "', 'dialogWidth:310px;dialogHeight:145px;scroll:no;help:no;status:no;');</script>"; if(!m_Page.ClientScript.IsStartupScriptRegistered("ErrorScript")) { m_Page.ClientScript.RegisterStartupScript(this.GetType(), "ErrorScript", l_S_ErrorScript); } When the button is clicked and this dialog needs to appear the following javascript error appears: Error: Object doesn't support this property or method The weird thing is, if I access the application locally and try it everything works fine, but accessing from another computer causes the error. Also, depending on what server (we have many servers for testing all with windows server 2003) the error may not occur on another computer either. These computers are running the same software version using the same version of IE with the same settings. I'm inclined to believe that there is some configuration issue somewhere, but with the settings being the same it is hard to tell. I cannot really change how the app works or the technologies used either. Anyone have any ideas as to what may be causing this?

  Read the article

• Getting browser culture using javascript

  - by The Sheek Geek

  Does anyone know how to obtain the browser culture from firefox and google chrome using javascript? Note: This is an asp.net 3.5 web application. The requirement is to try and set the applications display culture based on the browser culture. I have found very few bits and pieces of information for the other browsers but they do not seem to work. I am able to get it in IE with the following snipit of code: var browserCulture = this.clientInformation.browserLanguage; Any info would be great!

  Read the article

• Interpretation of Greek characters by FOP

  - by Geek

  Hi, Can you please help me interpret the Greek Characters with HTML display as HTML= & #8062; and Hex value 01F7E Details of these characters can be found on the below URL http://www.isthisthingon.org/unicode/index.php?page=01&subpage=F&hilite=01F7E When I run this character in Apache FOP, they give me an ArrayIndexOut of Bounds Exception Caused by: java.lang.ArrayIndexOutOfBoundsException: -1 at org.apache.fop.text.linebreak.LineBreakUtils.getLineBreakPairProperty(LineBreakUtils.java:668) at org.apache.fop.text.linebreak.LineBreakStatus.nextChar(LineBreakStatus.java:117) When I looked into the FOP Code, I was unable to understand the need for lineBreakProperties[][] Array in LineBreakUtils.java. I also noticed that FOP fails for all the Greek characters mentioned on the above page which are non-displayable with the similar error. What are these special characters ? Why is their no display for these characters are these Line Breaks or TAB’s ? Has anyone solved a similar issue with FOP ?

  Read the article

• flex chat/telnet application send/receive same window in TextArea

  - by Renassaince Geek

  Hi there, Just wanting to know if anybody has seen an example of a telnet/chat or other console like FLEX application where you can use the same TextArea as input/ouput area. I've been trying to modify the app at: http://livedocs.adobe.com/flex/3/html/17_Networking_and_communications_8.html but so far, computer says no. All the implementations I've seen use a combination of TextInput and TextArea. The challenge is that we'll be using this app to telnet into some old routers and we'll need to do a fair amount of copy/pasting. Based on what I've seen, it seems that I would need to point the mouse into the TextInput in order to be able to right click and paste, which is not very sleak..... Your thoughts, Fran

  Read the article

• Searching a number in a rotated sorted Array

  - by Geek

  Given a Sorted Array which can be rotated find an Element in it in minimum Time Complexity. eg : Array contents can be [8, 1, 2, 3, 4, 5]. Assume you search 8 in it.

  Read the article

• What is the proper way to declare a specialization of a template for another template type?

  - by Head Geek

  The usual definition for a specialization of a template function is something like this: class Foo { [...] }; namespace std { template<> void swap(Foo& left, Foo& right) { [...] } } // namespace std But how do you properly define the specialization when the type it's specialized on is itself a template? Here's what I've got: template <size_t Bits> class fixed { [...] }; namespace std { template<size_t Bits> void swap(fixed<Bits>& left, fixed<Bits>& right) { [...] } } // namespace std Is this the right way to declare swap? It's supposed to be a specialization of the template function std::swap, but I can't tell whether the compiler is seeing it as such, or whether it thinks that it's an overload of it or something.

  Read the article

• Better Way To Use C++ Named Parameter Idiom?

  - by Head Geek

  I've been developing a GUI library for Windows (as a personal side project, no aspirations of usefulness). For my main window class, I've set up a hierarchy of option classes (using the Named Parameter Idiom), because some options are shared and others are specific to particular types of windows (like dialogs). The way the Named Parameter Idiom works, the functions of the parameter class have to return the object they're called on. The problem is that, in the hierarchy, each one has to be a different class -- the createWindowOpts class for standard windows, the createDialogOpts class for dialogs, and the like. I've dealt with that by making all the option classes templates. Here's an example: template <class T> class _sharedWindowOpts: public detail::_baseCreateWindowOpts { public: /////////////////////////////////////////////////////////////// // No required parameters in this case. _sharedWindowOpts() { }; typedef T optType; // Commonly used options optType& at(int x, int y) { mX=x; mY=y; return static_cast<optType&>(*this); }; // Where to put the upper-left corner of the window; if not specified, the system sets it to a default position optType& at(int x, int y, int width, int height) { mX=x; mY=y; mWidth=width; mHeight=height; return static_cast<optType&>(*this); }; // Sets the position and size of the window in a single call optType& background(HBRUSH b) { mBackground=b; return static_cast<optType&>(*this); }; // Sets the default background to this brush optType& background(INT_PTR b) { mBackground=HBRUSH(b+1); return static_cast<optType&>(*this); }; // Sets the default background to one of the COLOR_* colors; defaults to COLOR_WINDOW optType& cursor(HCURSOR c) { mCursor=c; return static_cast<optType&>(*this); }; // Sets the default mouse cursor for this window; defaults to the standard arrow optType& hidden() { mStyle&=~WS_VISIBLE; return static_cast<optType&>(*this); }; // Windows are visible by default optType& icon(HICON iconLarge, HICON iconSmall=0) { mIcon=iconLarge; mSmallIcon=iconSmall; return static_cast<optType&>(*this); }; // Specifies the icon, and optionally a small icon // ...Many others removed... }; template <class T> class _createWindowOpts: public _sharedWindowOpts<T> { public: /////////////////////////////////////////////////////////////// _createWindowOpts() { }; // These can't be used with child windows, or aren't needed optType& menu(HMENU m) { mMenuOrId=m; return static_cast<optType&>(*this); }; // Gives the window a menu optType& owner(HWND hwnd) { mParentOrOwner=hwnd; return static_cast<optType&>(*this); }; // Sets the optional parent/owner }; class createWindowOpts: public _createWindowOpts<createWindowOpts> { public: /////////////////////////////////////////////////////////////// createWindowOpts() { }; }; It works, but as you can see, it requires a noticeable amount of extra work: a type-cast on the return type for each function, extra template classes, etcetera. My question is, is there an easier way to implement the Named Parameter Idiom in this case, one that doesn't require all the extra stuff?

  Read the article

• Skip Lists -- ever used them?

  - by Head Geek

  I'm wondering whether anyone here has ever used a skip list. It looks to have roughly the same advantages as a balanced binary tree, but is simpler to implement. If you have, did you write your own, or use a pre-written library (and if so, what was its name)?

  Read the article

• Unnamed/anonymous namespaces vs. static functions

  - by Head Geek

  A little-used feature of C++ is the ability to create anonymous namespaces, like so: namespace { int cannotAccessOutsideThisFile() { ... } } // namespace You would think that such a feature would be useless -- since you can't specify the name of the namespace, it's impossible to access anything within it from outside. But these unnamed namespaces are accessible within the file they're created in, as if you had an implicit using-clause to them. My question is, why or when would this be preferable to using static functions? Or are they essentially two ways of doing the exact same thing?

  Read the article

• Errors with large data sources

  - by The Sheek Geek

  I'm doing some benchmarking on large data sources and binding/exporting data for reporting. I started with using a data set, filling it with 100000 rows and then attempting to open a crystal report with the retrieved data. I noticed that the data set filled just fine (took about 779 milliseconds) however, when attempting to export the data to the report or even bind to a gridview the application would fail with an OutOfMemoryException. Does anyone experienced this before or have an idea of how to get around it? It is very possible that clients will run reports for years worth of data and 100000 rows are not inconceivable. The application and the benchmark code are written in C# using ORACLE and SQL Server databases. I still have some data sources to test, but would like to know how to get around this just in case I don't find a better solution.

  Read the article

• Java GC: top object classes promoted (by size)?

  - by Java Geek

  Hello! Please let me know what is the best way to determine composition of young generation memory promoted to old generation, after each young GC event? Ideally I would like to know class names which are responsible say, for 80% of heap in each "young gen - old gen" promotion chunk; Example: I have 600M young gen, each tenure promotes 6M; I want to know which objects compose this 6M. Thank you.

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >