Search Results

Search found 1862 results on 75 pages for 'stuart brand'.

Page 59/75 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

  • K8NDRE motherboard in server fails to complete BIOS load with error 0078

    - by John
    K8NDRE motherboard with 4 sata drives, was running fine. Drives had raid-0 and raid-1 partitions, using mdadm. The onboard raid is disabled. Upon reformatting the drives, setting a new partition structure and new raid partitions, the bios fails to finish loading, with 0078 in the bottom right corner. Tried using completely new set of drives, and bios worked fine. Able to boot from a usb, format the drives, partition them, start raid, and then installed os. Reboot and received the same error from the bios, 0078. Works fine if I unplug the sata drives. Any thoughts? Physical inspection reveals no damage cables, connectors, or capacitors. Server was running happily for over a year, and this is the first problem it has had. Per Michael Hampton's answer: The drives, unjumpered and supporting sata III worked fine originally, and worked fine for formatting and having new partitions and raid installed on them. I did try jumpering one, with no change. If I put a brand new unformatted drive in, the motherboard recognizes it and I can proceed with formatting and installing. When I reboot, I get the 0078. I have 4 sata cables-the board supports 4 drives, so I tried each and no change. I am close to calling the motherboard done.

    Read the article

  • What could be wrong with my VLAN?

    - by Matt
    I've got a VLAN 10 setup as a management VLAN. The management VLAN comes off port 48 and links to another set of switches that do not support VLAN's so it was I believe set up as an untagged access port. In the past this was a different brand of switch and this worked fine. However, since changing to the HP V1910-48G series I can't seem to get this working. I must point out that as far as I'm aware it is wired up properly (I can't check this physically as I'm working remote and have asked the tech who's got access to double check for me). Now I don't have a huge amount of experience with VLAN environments but AFAIK this is right. I've set the port 48 (linked to the management switches) as an untagged port with PVID 10 and access link type. Is this all I'd need to do from a configuration perspective to ensure all devices connected to port 48 would end up being on VLAN 10 and not needing to tag their frames. i.e. the tag would be added by the switch before being forwarded.

    Read the article

  • How to eliminate the domain suffix off my user profile folder when migrating to a new domain?

    - by Jerry Dodge
    We have just upgraded a decade old SBS 2003 server to a brand new SBS 2011 machine. During the process, over 30 other client/server machines on that domain also needed to be dis-joined and re-joined from the old domain to the new one. These domains have different names and is not migrated in any way. It's built from scratch. Since each client machine had very unique user profiles under this domain, we needed to make sure these were all backed up and migrated over to the new domain. For the most part, profiles were migrated with no hassle, just by renaming the user profile folder names. However, in one case, when I log in to my domain account, it creates a profile folder with a suffix of the new domain name. I have replaced all the files in the profile's root which begin with "ntuser" with the files of the new profile. The only problem is half the applications can't find their data, because the folder name is different. How can I change this folder name and maintain this profile on the new domain? I have deleted every user account (except admin), deleted their profiles/folders, removed them from the registry, and made sure every trace of this account was gone. The computer was basically a dummy with only an admin account. Then, I log into the machine under my new domain user account (same username as the old domain). It creates a profile folder with my username plus a suffix extension of the new domain name. The client machine is Windows 7 Ultimate, the old server was SBS 2003, and the new server is SBS 2011.

    Read the article

  • Xen virtual host can reach some sites but not others

    - by Tun H S Lee
    Okay, this is killing me. Debian Squeeze, Xen 4.0, brand new install. No iptables rules whatsoever except for the ones added by the default xen bridge script. Dom0 can reach the entire world, no problems. DomU can receive packets from some hosts, but not from others. For instance, if I ping Host A, it works fine. If I ping Host B, the DomU reports 100% packet loss. The hosts are random, but consistent (even after reboots). I can see no pattern to why some work and others don't. In fact, in some cases, different virtual hosts on the same server (an other server at a different data center) are divided; some work and others do not. I can reboot (DomU or Dom0 too) and the same hosts will work or fail as before. If I tcpdump on the Host B while pinging from the DomU, everything looks fine. It sees the echo request coming in and says it's sending one back. However, if I tcpdump peth0 on the Dom0, it never sees the echo reply. Any ideas what could be happening? I'm tearing my hair out here.

    Read the article

  • Managing SharePoint permissions via Active Directory?

    - by rgmatthes
    My company has thousands of employees organized thoroughly via Active Directory. I have confidence in the accuracy of the Department and Title information displayed in the user profiles. I'm helping to put up a brand new SharePoint 2007 site, and I contacted IT about managing the site's permissions through AD Groups. The goal is to have the site automatically assign read/write/contribute/whatever permissions based on the information in AD. For example, we could create an AD Group called "Managers" that would contain anyone with the "Manager" title in their AD user profile. I would have SharePoint tap into this AD Group to mass assign permissions if I knew all managers would need a certain level of access (read/write/contribute/whatever). Then if a manager joins the company or leaves it, the group is automatically updated (provided AD gets updated, of course). My IT rep called back and said it couldn't be done. This seems like a pretty straightforward business requirement, and one of the huge benefits of having Active Directory, but maybe I'm mistaken. Could anyone shed some light on this? A) Is it possible to use dynamically-updated AD Groups when assigning permissions via SharePoint? (Does anyone know of a guide I could show my doubtful IT rep?) B) Is there a "best practice" way to go about this? I've read some debate on whether SharePoint Groups or AD Groups are the way to go. My main concern is dynamic updating. C) If this isn't available out of the box, can someone recommend third-party software that will provide the functionality I'm looking for? A big thanks to anyone who can help me out!!

    Read the article

  • 2012 R2 services will not start after promotion to Domain Controller

    - by Cybersylum
    Having a peculiar issue promoting a Windows 2012 R2 server in a domain at 2003 domain/forest functional level. Built a new 2012 R2 server, added the following software (labtech, appassure, eset A/V, & Teamviewer). It activated and appeared to be working fine. I added the Active Directory Domain Services role, and completed the configuration (Domain/Forest Prep, and DC promotion). All appeared to go well. I rebooted the server, and that's where the peculiar stuff began. I noticed the server indicated it needed activated again; but would not accept the key. I verified the key was good. That's when I noticed the Software Protection service (as well as many other core services - Base Filtering engine, DHCP client, firewall, etc) would not start. The error message for all of them was "Access Denied". I called MS, and they wanted to troubleshoot at a service level. Their fix was to use procmon and identify the resource that needed permissions (registry key, file or folder) and add "everyone" with full control). That got the services to start; but the problem re-appeared after a reboot. Thinking the issue might have been with the anti-virus package during the promotion process, I rebuilt the DCs from scratch and removed the metadata from AD (as I could not demote the machines "rpc server unavailble"). I tried to promote the newly built machines again. The only changes to the brand new machines being critical updates. Again the promotion appeared to work fine; but upon reboot (and a long wait to allow replication to occur) similar problems began to re-appear. I have verified that the schema updates are correct (schema version is 69 - for Windows 2012 R2). I am not finding much about this issue through my own searches, so I thought I would post this to see if anyone else has seen anything similar...

    Read the article

  • Why isn't Apache Basic authentication working?

    - by Brad
    I just upgraded Apache from it's 2003 build, to a squeaky-clean, brand-new 2.4.1 build. All seems pretty good except for one glaring thing: In my httpd.conf file I have the following: <Directory /> AllowOverride none Options FollowSymLinks AuthType Basic AuthName "Enter Password" AuthUserFile /var/www/.htpasswd Require valid-user </Directory> This should allow only users in the specified auth file to access the server - just as it had under the older version of Apache. (Right?) However, it's not working. Requests are granted with no authentication provided. When I switch logging to LogLevel Debug, for the accesses, it says: [Sat Mar 24 21:32:00.585139 2012] [authz_core:debug] [pid 10733:tid 32771] mod_authz_core.c(783): [client 192.168.1.181:57677] AH01626: authorization result of Require all granted: granted [Sat Mar 24 21:32:00.585446 2012] [authz_core:debug] [pid 10733:tid 32771] mod_authz_core.c(783): [client 192.168.1.181:57677] AH01626: authorization result of <RequireAny>: granted I really don't know what this means - and I (to the best of my knowledge) don't have any "Require all granted" or "" statements in any of my files. Any ideas why this isn't working, or where to debug??

    Read the article

  • Serious 64-bit laptop

    - by Daniel Gehriger
    For the past couple of years, I have been using an IBM Thinkpad T60p for daily work (software development, desktop & embedded). I am extremely satisfied with this machine, due to its robustness. It also has a few features I depend on: a high resolution display: 15.0" TFT FlexView display with 1600x1200 (UXGA); excellent keyboard; decent graphics and CPU performance. Some of the software I develop benefits from larger amounts of RAM, and 3GB (Windows 7 32-bit) or 4GB (Windows 7 64-bit on T60p) are no longer sufficient. My customers run desktop computers with 20GB and more, and I need to have at least 8GB to at least be able to run reasonable test cases. So I'm shopping around for a new laptop, but I'm struggling to find anything that matches my requirements: must run Windows 7 64-bit Pro or higher; must support at least 8GB of RAM (more is better) high screen resolution! While I prefer 4:3 I can live with wide screen. But I really hope to find something with a vertical screen resolution similar to what I have now... portable, so < 16" but = 14" I realize that FlexView isn't available anymore, but I'd like to avoid a glossy screen if possible. decent (not more) graphics performance, ideally hybrid (I'm doing a lot of CAD, never games). good keyboard reasonable CPU -- but I'm still fine with my current Core 2 Duo, so that shouldn't be too complicated. The T60p fits all those requirements, except the 8GB of RAM. Can you help me find a current notebook that would match most of them? I don't mind changing brand. Thanks!

    Read the article

  • Drowning in documents - recommend doc management solutions?

    - by Martin Day
    I've been researching document management lately. I want to organise my docs at home and also at the office. Finding affordable solutions one can actually test drive is quite hard. Some that I've downloaded just don't seem to work (testing on brand new Vista PC). I've seen some software on Amazon like Paperport but not really sure what they're like. For home I'd like something to organise files, full text search, good scanner integration, nice interface etc. But for the office it seems harder. I need something that does proper workflow and keeps versions. It will have an audit trail. Documents can be approved, checked in/out etc. I know a few clients who would like something similar. It would be great just to import thousands of documents from a shared drive and get them indexed with dupes killed. I'd like to be super clear about how/where the documents are being stored so that maintenance and backups are clear. My Google/twitter searches lead back to the same tired and vague webpages pushing what look like expensive and custom made solutions. Some might be very good I suppose but it's darn hard to tell. I don't mind a hosted package but all in all I don't think something like Google Docs, as good as it is now, will work. There are too many quirks and missing features (as compared to Office). Being able to work directly with the common Office file formats is important. I've noted a similar sounding question asked here back in August but it didn't seem to turn up too many solutions that I could easily and quickly apply. Also there could have been some changes since then so I feel it's worth asking.

    Read the article

  • Figuring out which PC part is faulty

    - by Davy8
    I have an odd scenario and I'm having trouble figuring out which is the faulty component. First of all, the video doesn't work, monitor says it's not getting a signal. Monitor's not faulty (works on other computer) so the first suspect was video card. However 2 things make me think it's not the video card. (Don't have another machine with PCIe around to test definitively) First, the GPU fan is spinning so it's getting power. Second, tried putting in an older PCI video card that is known to be working (pulled out of another working machine) and there's still no video. Normally if it's not the video card I'd suspect the motherboard, but everything's getting power on the mobo, so I'm not sure. The case apparently doesn't have system speakers, so can't hear any of the diagnostic beeps either. Also not sure whether a faulty CPU would cause no image at all either. The parts are brand new so something's going to get RMA'd but I'm not sure which component is to blame in this case. (Only slightly related, but I also accidentally put too much thermal paste on the CPU. The fan/heatsink instructions said to put the whole tube which seemed like a lot compared to previous experience, and as I started squeezing I knew it was definitely too much and stopped at about 1/3 but against my better judgement I didn't wipe any off. I'm not sure whether that would cause problems other than not cooling as effectively as it should)

    Read the article

  • Chrome Lockups Windows 7 64-bit

    - by Mike Chess
    I'm running Google Chrome (6.0.427.0 dev) on Windows 7 Home Premium 64-bit (AMD Phenom 3.00 GHz, 8 GB RAM). The computer lockups hard after running Chrome for about five minutes. The lockup happens whether Chrome is actually being used to browse web sites or it is just idling. No programs can be started or interacted with when this happens. The computer must be power-cycled to recover. The lockup happens regardless of which web sites are being browsed. The system event logs do not show any events around the time when the lockup transpired. All other applications run just fine on this system. In fact, Chrome ran without issue for several months on this system (the system was brand new 03-2010). I also run the same version of Chrome on other computers (Windows XP SP3) without issue. I've come to really like Chrome and use it as my default browser whenever possible. What could be causing Chrome to cause the system to lockup as it does? Does Chrome have any logs that aren't part of the Windows event log? Does Chrome have a debug command line switch that might reveal more about what happens?

    Read the article

  • Can't detect hard drive on Macbook Pro

    - by MartinMoizard
    I changed a few month ago the config of my Macbook Pro with the following: I bought a SSD hard drive I removed the hard drive of my Mac book Pro and installed there my brand new SSD Then I removed my DVD drive and installed my hold hard drive instead with a caddy Everything was working great until today when I couldn't access anymore to my old hard drive because it is not detected anymore. Sometimes Mac OSX is mounting it but it takes like 15 min to browse a simple folder. I opened my laptop to have a look at the problem. It seemed like the optical drive connector was not plugged correctly to the motherboard (that connector: http://cl.ly/2T0X2e1j0J1g47061d1t). So I plugged it correctly and reboot. It didn't fix my problem. Then I tried to put my SSD in the caddy and to boot: no hard drive was detected. So I guess there is something wrong either with the caddy, either with the optical drive connector, or either with the plug that is on the motherboard. So my question is, how can I know where the problem comes from?

    Read the article

  • Use external display from boot on Samsung laptop

    - by OhMrBigshot
    I have a Samsung RV511 laptop, and recently my screen broke. I connected an external screen and it works fine, but only after Windows starts. I want to be able to use the external screen right from boot, in order to set the BIOS to boot from DVD, and to then install a different OS and also format the hard drive. Right now I can only use the screen when Windows loads. What I've tried: I've tried opening up the laptop and disconnecting the display to make it only find the external and use the VGA as default -- didn't work. I've tried using the Fn+key combo in BIOS to connect external display - nothing I've been looking around for ways to change boot sequence without entering BIOS, but it doesn't look like it's possible. Possible solutions? A way to change boot sequence without entering BIOS? Someone with the same brand/similar model to help me blindly keystroke the correct arrows/F5/F6 buttons while in BIOS mode to change boot sequence? A way to force the external display to work from boot, through modifying the internal connections (I have no problem taking the laptop apart if needed, please no soldering though), through BIOS or program? Also, if I change boot sequence without accessing external screen, would the Ubuntu 12.1 installation sequence attempt to use the external screen or would I only be able to use it after Linux is installed and running? I'd really appreciate help, I can't afford to fix the screen for a few months from now, and I'd really like to make my computer come back to decent performance! Thanks in advance!

    Read the article

  • Why does the wireless network icon have a red X over it when everything seems to work?

    - by Kristo
    I booted my almost brand new laptop running Windows 7 this morning and noticed a red X through the wireless networking icon in the system tray. At first I thought something was wrong, but clicking on it shows a good connection to my wireless network. I had no problem getting here to post this question. I'm very new to Windows 7 so I have no idea how to troubleshoot this myself. Is there an actual problem here? Can I fix the icon so it doesn't falsely display an error (I assume that's what the red X means)? Here's what I know: I can get here to post this question. There's at least one unsecured network available that I'm not connected to. I can see a bunch of wireless networks, presumably from my neighbors' houses. There are no other computers turned on in my house right now. The device manager shows no problems with any devices. I can ping my default gateway, DNS, and yahoo.com with no problem.

    Read the article

  • Managing SharePoint permissions via Active Directory?

    - by rgmatthes
    My company has thousands of employees organized thoroughly via Active Directory. I have confidence in the accuracy of the Department and Title information displayed in the user profiles. I'm helping to put up a brand new SharePoint 2007 site, and I contacted IT about managing the site's permissions through AD Groups. The goal is to have the site automatically assign read/write/contribute/whatever permissions based on the information in AD. For example, we could create an AD Group called "Managers" that would contain anyone with the "Manager" title in their AD user profile. I would have SharePoint tap into this AD Group to mass assign permissions if I knew all managers would need a certain level of access (read/write/contribute/whatever). Then if a manager joins the company or leaves it, the group is automatically updated (provided AD gets updated, of course). My IT rep called back and said it couldn't be done. This seems like a pretty straightforward business requirement, and one of the huge benefits of having Active Directory, but maybe I'm mistaken. Could anyone shed some light on this? A) Is it possible to use dynamically-updated AD Groups when assigning permissions via SharePoint? (Does anyone know of a guide I could show my doubtful IT rep?) B) Is there a "best practice" way to go about this? I've read some debate on whether SharePoint Groups or AD Groups are the way to go. My main concern is dynamic updating. C) If this isn't available out of the box, can someone recommend third-party software that will provide the functionality I'm looking for? A big thanks to anyone who can help me out!!

    Read the article

  • New router, slower internet connection?

    - by qwerty
    So, we just bought a new router a few hours ago, and it does work. However, for some reason the speed is just ridiculously slow (compared to before, at least)! If i run a test on speedtest.net i get the following results: http://i.imgur.com/68JyH.png which are pretty good. But for some reason it's like the connection just "hangs" for a second when i navigate to a site through the browser (have tried different browsers). It's not on all sites, it kind of happens randomly. I think the browser cache might be speeding some sites up, because if i visit a site that i HAVEN'T visited before (since i cleared my cache), it takes like two seconds (if not more) to open the site. If i have visited it, it opens directly (it barely loads). Not sure what to do, really. Any suggestions on what might speed it up? Any settings i can play with in the router settings? The router is of the brand Belkin. I'm not sure about the model though, it says "Belkin, Play Max Wireless Router" on the box? Thanks in advance! EDIT: Alright, it takes a lot more than two seconds. At least 3-4 depending on the site. Any suggestions?

    Read the article

  • Computer not finding hard drives on boot -sometimes-

    - by todd.pund
    Computer specs: Mobo: Gigabyte ultradurable 3 - GA-970A-UD3 Processor: First gen I7 3.2GHZ Ram: 8GB Kingston DDR3 1066 Video Card: EVGA NVidia GTX 460 1GB Hard Drive: 500MB 7200rpm x2 (can't remember brand, sorry I'm at work.) Last week my developer preview for Windows 8 ran out so I put my copy of windows 7 back on the computer. The computer at that point started suffering from frequent freezing and crashing. When I rebooted the computer sometimes it wouldn't find the system HD at all. When I looked at the post screen it seemed to show that it wasn't finding either of the HDs. Then yesterday when turning on the computer I just got GRUB as a message (not a GRUB prompt, just GRUB) I haven't had a dual boot of Linux for at least a year. I loaded windows 7 recovery console from the disk and ran: bootrec /fixboot bootrec /fixmbr Which did not help. At that point I just installed Ubuntu 13.04 over the windows 7 install and still received the GRUB post. I went into the BIOS and switched the Hard Drive priorities and then it loaded into Ubuntu fine. For several days everything was just hunky dory until I installed the Ubuntu version of Steam, install Portal and tried to run it. At that point the computer froze and after hard rebooting couldn't find the hard disks again. Then after restarting the system it loaded up fine again and no issues since. (I have not tried to launch portal again). My next thought is to remove the system hard drive and try to use the secondary as the master to see if the primary HD is bad. I'm sorry if this has been confusing, I'll answer any questions I can. Any thoughts?

    Read the article

  • Replaced CPU and black screen but no beep?

    - by luke
    I'm having a bit of trouble with a GIGABYTE GA-MA78G-DS3H (rev. 2.0) motherboard. Recently when trying to clean my AMD Phenom II X 4 CPU, I dropped it and broke some pins. I have now brought a Athlon 64 X2 5400+. However, it does not seem to work. To begin with, I cleared the CMOS via the jumper located near the battery. This was because I had my AMD Phenom II overclocked and did not wish for the same voltage to go to the new CPU. I then tried booting with the monitor plugged into the chipsets VGA but no luck. No signal was sent to the monitor, and the monitor just went into standby. I then tried it off the graphics card but the same happened again. Then I tried to check whether the CPU could executed some BIOS codes by stripping the RAM out and making sure a speaker was plugged in but no beeps could be heard. I replaced the speaker and tried again but no luck. The CPU is brand-new so what is going wrong?

    Read the article

  • How to prevent an SSD from disappearing from BIOS

    - by Midimatt
    I've only recently upgraded my old machine to a new one with a brand new 60gb SSD as my boot drive and a 1TB main drive. Paranoid about completely breaking my SSD, I read up on a lot of issues that I needed to watch out for, including making sure AHCI was turned on and trim enabled. PC has been working fine for a few weeks now, until today. My wife was watching some TV on the machine when it started to act strange and eventually blue screened. She rebooted and the boot mgr was missing. When I got home from work I checked the BIOS and the drive had disappeared. I panicked and looked up some possible fixes, and I discovered a large amount of people having problems with the drive firmware, especially on OCZ Vertex and Agility drives, and my drive is an Agility 3 drive. The problems included blue screens followed by missing drives, and a solution was to reset the CMOS and try again. This worked, and now everything seems to be working fine. My question is, is there any way to prevent this from happening? Am I missing a setting for my SSD? All of the posts I found were from early to mid-2011 nothing for the end of 2011 to 2012. So I am wondering if I've missed anything. EDIT: Checked my drives firmware and it is 2.15, which has had issues reported by users.

    Read the article

  • Computer freezes after watching Youtube videos

    - by Roberts
    I had Windows 7 installed all september. But I installed Windows XP Professional back because my computer couldn't handle the new OS. After first boot I tried to install newest flash player (from Adobe website), but it failed. I had my old setup on USB drive and it worked. I don't know is it important or not. I am watching Youtube videos in my free time (almost every hour). After few days the computer started to freeze when I open a page with the video or close the page with video, not while I watch a video. No BSODs. Nothing in Event viewer. I use Firefox only. When computer freezes the sound wont. If iTunes is playing a radio station or is it another video playing in background, the sound wont freeze. Last few days the mouse wont freeze. Its a strange symptom. If I click few times then the cursor will actually freeze. I just want to know where does this problem come from (hardware - graphics card, old motherboard or it's just some glitch in setups). If it's not graphics card then I will be happy. The graphics card is ATI Radeon HD 4650 - brand new. Catalyst 11.8 installed. Things I have tried: Installed newest flash player after a week (the setup didn't fail this time) Installed latest video drivers Deleting cookies Defragmenting hard drive Using TuneUp utilities for computer cleenup Installed latest Mozilla Firefox Cleaned the PC Changed CPU Fan speed almost to max (just to be sure) Things I haven't tried yet: Didn't try playing videos on other browsers What can I do now?

    Read the article

  • Network card shuts down when stressed

    - by user142485
    I have a network card that functions fine with light use, but quits functioning after heavy use. I replaced it with a brand new one and still have the same issue, also updated drivers. It is a wired D-Link card. The Internet seems fine for a small amount of web browsing but when I run a bandwidth test it starts out fast and slows quickly until the card completely quits; I have a constant ping of the gateway going while I run this and it starts timing out after a couple seconds into the speed test. The card will stay on and the data light on it still flashes some but I cannot ping the gateway or anything else until the computer is rebooted. When I boot into safe mode I can browse and run the speed test fine with no problems. I am guessing that this is probably some program that is loading in regular mode but not safe mode that is causing the issue? I have very limited software (turned off av and firewall) on the computer but I am thinking that I'll just have to start eliminating start-up programs and see if that helps. This is on Windows 7 if that makes any difference. Anyone had a similar issue or have any other suggestions/ideas for narrowing down this problem?

    Read the article

  • Change the background color of selected text in Google Docs to increase readability [migrated]

    - by gene_wood
    How can I override or change the background color of text selected in Google Docs? It is difficult for me to see the difference and I would like to increase the contrast or difference. After Google restyled Google Docs last year (or earlier this year), I've been unable to see selected text. It's possible this is a visual deficiency with my eyes. In Google Docs, under both Google Chrome (17.0.963.83 (Official Build 127885) m) and Firefox (11.0), when I select text inside a Google Doc, the selected text has a background of color #d6e0f5. Compare this to the default browser background color of #2f65c0. (I determined the color of the selected text background by taking a screenshot and using the color picker tool in Photoshop). I've tested this using a brand new Firefox profile as well as google chrome profile. Here's a section of a screenshot showing the selected text : I've tried using a userscript to override the CSS to go back to the default text selection color using the "Stylish" plugin with this css : ::selection { background:#2f65c0; color:#ffffff; } ::-moz-selection { background:#2f65c0; color:#ffffff; } ::-webkit-selection { background:#2f65c0; color:#ffffff; } This code works on other sites, but I'm unable to get it to work on Google Docs. (I tested on other sites but applying the userscript to a different domain and using bright yellow instead of the default dark blue #2f65c0.) When you use Google Docs, do you have the same color background for selected text or something different? (To test this, browse to docs.google.com , create a document, type text into the document, select the text with the mouse by dragging over it, take a screenshot, load the screenshot up in an image editor and determine the background color of the selected text.) This color differential (between light blue #d6e0f5 and white #fffff) may be easy to see for others and the problem lies with my eyes.

    Read the article

  • Run 3 monitors on two different video cards?

    - by hullot
    Can I run 3 monitors on two different video cards? I have an ATI and Nvidia brand card. The ATI has 2 HDMI connections. They both work. Both cards are also picked up in Windows, one being the ATI and the other one as the Nvidia, but it says VGA Controller, although the card only takes 2 DVi. So, one DVI cable goes into that Nvidia card. 3 Monitors, but only 2 the HDMI ones from the ATI pick up, not the third one which is connected to the Nvidia via DVI. How can I run three monitors then? I suppose I can't install both drivers, so I'm unsure what to do. Is this possible? I just want the Nvidia card to power the third screen, no gaming on it, nothing. Also the ATI is picked up as primary card as well, so no hurdle there. EDIT: Hm, just installed the Nvidia drivers and it picked up the third screen no problem. Hope there aren't any major conflicts. Will post this as an answer as correct when I'm able. Can't as a new user.

    Read the article

  • Constant crashes in windows 7 64bit when playing games

    - by yx.
    I've tried everything I can possibly think of in trying to fix this problem and I'm totally out of ideas, so any help would be appreciated: The problem: whenever I fire up a game, it works for a short while with no problems and then it would crash. Either its a hard crash, forcing me to reboot, or windows would report that the display driver has stopped working and recovered. Here is a list of things I've already tried: Drivers - tried the latest drivers (catalyst 9.12) as well as the stock drivers that came with the video card. Also have the latest BIOS/chipset Memtest - Ran Memtest86+ overnight, had no problems, the windows diagnostic tool also does not find any problems. Overheating - Video card/cpu temperatures are well below peak (42 and 31 Celsius receptively) PSU Voltage - CPUID shows that the voltage levels are all above what they should be. The PSU itself is only roughly 16 months old and is a good model. HDD - No errors when checked GPU - Brand new (replaced previous card since I thought it was the problem, apparently not) Overclocking - Everything is at stock levels, memory voltage is set to manufacturer's standard Specs: Motherboard: ASUS P5Q Pro CPU: Core 2 Duo E8400 3.0 ghz OS: Windows 7 home premium 64 bit Memory: Mushkin Enhanced 4GB DDR2 GPU: Sapphire HD 5850 1GB PSU: SeaSonic M12 600W ATX12V DirectX: DX11 Event Viewer after a crash always has these logged: A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 1 The details view of this entry contains further information. A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 0 The details view of this entry contains further information. A previous card that I had (4850x2) also had these errors, so I changed video cards, but the same thing is happening.

    Read the article

  • Installing Windows 8 to another computer with an OEM product Key

    - by user180671
    Questions come up after reading the article about the new method Microsoft uses to License windows 8 computers. Let say I bought a Brand new laptop with windows 8 preloaded. Not like the old way, there is no OEM sticker in the back of the computer which can be used for reloading system.(new product key is stored in BIOS as mentioned in the article, the key can be pulled out by using a software anyway). Is it possible to install windows 8 on another computer with that particular key in case the computer is totally damaged? Here is what i tried: First, I extracted the key with a software name "windows 8 key viewer". using the windows 8 upgrade tool to determine what copy of windows 8 I should download for the installation. The tool did correctly recognized the key as a legitimate one. but it claims that key can not be installed with a retail media (Since it is an oem key). Does this mean the only way to do it is to use an OEM CD from the manufacturer? Will ISO from MSDN source do? or it is just not possible??

    Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >