Search Results

Search found 31356 results on 1255 pages for 'database backups'.

Page 590/1255 | < Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >

• IDE/PATA high-speed hard drive dock

  - by wfaulk

  I frequently need to access bare drives for backups and need a quick, high-speed way to deal with them. There are a multitude of SATA hard drive docks (for example), but I have a lot of IDE/PATA (hereafter "IDE") drives that I would like to be able to use similarly. There are IDE-to-SATA adapters so you can plug your IDE hard drive into a SATA port, so I don't see any reason why you couldn't use the same technology to have a native dock, yet none seems to exist. Now, I'm aware that 3.5" IDE drives do not have a specification for the layout of the connector, and therefore can't be slapped into a dock the same way a SATA drive could, but 2.5" PATA drives do. In fact, I'm not terribly interested in supporting 3.5" drives. It would be nice, but I deal with them far less frequently than 2.5" drives. Also, I'd very much like for the connection to the computer be faster than USB, preferably eSATA, I don't want to be spending time mounting a drive inside an enclosure, I don't want bare drives lying around with a cable hanging off of them, and I'd prefer a single dock rather than two. What seems like the ideal solution to me would be a regular SATA→eSATA dock and some sort of screwless adapter for IDE drives, but I'm open to any suggestions, regardless of my stated preferences, but which are, in some sort of order of preference: high-speed (faster than USB, at least) holder for drive (not just a cable) no complicated enclosure support for 3.5" IDE drives single dock Updates: Here's a 3.5" IDE to 3.5" SATA docking adapter that could be part of the solution. Weird. I figured that would be the impossible part. I was hoping to find something like this 2.5" to 3.5" SATA chassis that would take a 44-pin IDE drive internally. It looks like the Vantec EZ Swap EX comes awfully close. It has its own bay dock, but it looks like the SATA ports on the back are spaced properly, even if they're not aligned quite properly. Unfortunately, the proper position is at the very edge of the drive, which means that the docks' connectors are at the very edge of their recesses, which means there's no way to fit it in there.

  Read the article

• Timer or Thread?

  - by Pradeep Singh

  I have a method(say method1) that writes to database(sqlserver)and another method(say method2) that tries to access the same database after some time and updates the data row that was created by method1. The problem arises when method1 fails to access db due to the LAN being disconnected (this is not an exception this is a scenario that will definitely arise in my software, getting into details will make the question too complex) if method1 fails to access db method2 cannot work. What I want to do is to make method1 store values to local db instead of server if the LAN is disconnected and as soon as it enters value in local db the application should start trying to access the server after ever 10-15 seconds. What should I use timer or create a new thread?

  Read the article

• Best way to find updates in xml feed

  - by misterjinx

  Hello all, I have an xml feed that I have to check periodically for updates. The xml consists of many elements and I'm looking to figure it out which is the best (and probably faster) way to find out which elements suffered updates from last time I've checked. What I think of is to check first the lastBuildDate for modifications and if it differs from the previous one to start parse the xml again. This would involve keeping each element with all of its attributes in my database. But each element can have different number of attributes as well as other nested elements. So if it would be to store each element in my database what would be the best way to keep them ? That's why I'm asking for your help :) Thank you.

  Read the article

• C# Nested Property Accessing overloading OR Sequential Operator Overloading

  - by Tim

  Hey, I've been searching around for a solution to a tricky problem we're having with our code base. To start, our code resembles the following: class User { int id; int accountId; Account account { get { return Account.Get(accountId); } } } class Account { int accountId; OnlinePresence Presence { get { return OnlinePresence.Get(accountId); } } public static Account Get(int accountId) { // hits a database and gets back our object. } } class OnlinePresence { int accountId; bool isOnline; public static OnlinePresence Get(int accountId) { // hits a database and gets back our object. } } What we're often doing in our code is trying to access the account Presence of a user by doing var presence = user.Account.Presence; The problem with this is that this is actually making two requests to the database. One to get the Account object, and then one to get the Presence object. We could easily knock this down to one request if we did the following : var presence = UserPresence.Get(user.id); This works, but sort of requires developers to have an understanding of the UserPresence class/methods that would be nice to eliminate. I've thought of a couple of cool ways to be able to handle this problem, and was wondering if anyone knows if these are possible, if there are other ways of handling this, or if we just need to think more as we're coding and do the UserPresence.Get instead of using properties. Overload nested accessors. It would be cool if inside the User class I could write some sort of "extension" that would say "any time a User object's Account property's Presence object is being accessed, do this instead". Overload the . operator with knowledge of what comes after. If I could somehow overload the . operator only in situations where the object on the right is also being "dotted" it would be great. Both of these seem like things that could be handled at compile time, but perhaps I'm missing something (would reflection make this difficult?). Am I looking at things completely incorrectly? Is there a way of enforcing this that removes the burden from the user of the business logic? Thanks! Tim

  Read the article

• Time Machine doesn't back up some folders/files (that it should)

  - by Eric

  MacBook Pro 17" (Snow Leopard) -- WD 2TB external drive MacBook Pro 13" (Snow Leopard) -- Seagate 1TB external drive I find that Time Machine sometimes doesn't back up new folders (and the files in them). This occurs both when I choose "Back Up Now" from the Time Machine icon in the Menu Bar and in TM's scheduled backups. These are not excluded folders (nor are then in the TM do-not-back-up list); they're perfectly normal folders (at various locations) inside my home folder. The only way to force them to be backed up is to restart the computer (unmounting & mounting the TM external disk does not help). There seems to be a correlation with new folders (i.e., it's more likely to happen that an entire new folder is not backed up), but this may just be observer bias (because those are the folders that I go check to see if they've been backed up). It's not computer dependent (it happens on two different computers). It's not external disk dependent (it happens on two different external disks). It's not time dependent (not restarting for several days does not fix the problem). What does a restart change that these other events don't? I'm considering deleting the /.fseventsd folder (without restarting the computer) to see if that helps. I haven't tried logging out and logging in (without restarting the computer).

  Read the article

• Creating mdraid device on top of other existing mdraid devices

  - by Dmitriusan

  I'm considering creating something like "hierarchical raid" and wondering whether it is possible using pure mdraid. Moreover, I'm going to boot from this device. I'm using Ubuntu Server 12.04 LTS with Grub2 bootloader. Motivation behind doing that is: I have 4 x 1tb 7200rpm disks. Two are newer and faster (up to 200mb/sec) and other two are slower (up to 140mb/sec). I want to create RAID-0 device from them. When creating such RAID-0 directly from 4 hard disks, I get summary speed up to ~480mb/sec. That is roughly 4*120mb/sec, so RAID-0 works with speed of the slowest device. I have an idea to create a separate RAID-0 md0 device from 500gb partitions of slower hard disks. Theoretically, this md0 device will have speed 2*140=240~280mb/sec. After that, I'm going to add this md0 device to RAID-0 with faster disks, finishing with up to 3*200=600mb/sec. Stripe-width for this raid will be 2x times bigger than for underlying raid with slow disks. Questions are: is it possible or I'm missing something? will that work as expected? can I boot from such consolidated raid device? any better ideas? any pitfalls? I don't want to use fakeraid for consolidating slow disks for multiple reasons (portability, ability to customize parameters and so on). PS Speed is needed for home virtualization server and just for experience/fun. Reliability is provided via regular automatic backups to a separate device. PPS I considered also using different stripe-width for hard disks with different speed in single raid, but mdraid does not seem to support that.

  Read the article

• Unique identifier for an email

  - by Skywalker

  I am writing a C# application which allows users to store emails in a MS SQL Server database. Many times, multiple users will be copied on an email from a customer. If they all try to add the same email to the database, I want to make sure that the email is only added once. MD5 springs to mind as a way to do this. I don't need to worry about malicious tampering, only to make sure that the same email will map to the same hash and that no two emails with different content will map to the same hash. My question really boils down to how one would combine multiple fields into one MD5 (or other) hash value. Some of these fields will have a single value per email (e.g. subject, body, sender email address) while others will have multiple values (varying numbers of attachments, recipients). I want to develop a way of uniquely identifying an email that will be platform and language independent (not based on serialization). Any advice?

  Read the article

• How do I call window.openDatabase from a webView hosted in an android application?

  - by Kevin

  I created a native Android app that basically hosts a webView control. That webView is then used to load a page that calls window.openDatabase from JavaScript. I can successfully confirm that the API exists by verifying window.openDatabase. Calling this method returns a null when called in a hosted webView control. Calling the same method in the Android Browser returns an instance of the database. Does anyone know the permessions in the manifest or settings on the webView control that need to be set to access the database? Is this even possible in a native app.

  Read the article

• PHP with DB backed-end application to complete windows EXE possible or not?

  - by Devyn

  Hi, Let's say I have a php application backed-end with SQLite and I would like to convert whole application to exe file so the end user can just click it and run on windows. User should be able to save, update and add new data into database without any web server or browser things. Is it possible? I found out that we can use PHP-GTK for UI. exeoutput.com supports with database engines according to it's website. Anyone have tried it out? If I'm missing something, pls share with me. Thanks all in advance and happy new year!!!

  Read the article

• Setting up a Pagefile and Partition in Server 2008

  - by Brett Powell

  I am setting up 18 new machines for our company, and I have instructions from my new boss on setting up a Pagefile and Partition. I have looked at their existing machines to base the new setups off of, but there is no consistency between any 2 machines, which has left me extremely frustrated to say the least. My instructions are... 1) Set a static pagefile (use recommended value as max/min), set it on SSD if SSD available. 2) Make 3 partitions: C: is used for OS and install files D: is used for backups on machines with a SSD. On machines without SSD create a D: partition for pagefile (2*installed RAM for partition size) E: must be the partition hosting user files I have never messed with Pagefiles before, and looking at their existing machines is offering no help. My questions are... 1) As the machines I am setting up have no SSD (just 2 SATA drives) does it sound like the Pagefile should be setup on the C: (primary) drive or the D:? The instructions are vague so I have no idea. 2) As C: and D: are both Physical drives, does it sound like C: should be partitioned out to create the E: drive or D:? Thanks for any help I can get. I am extremely stressed out under a massive workload right now, and these vague instructions are quite infuriating.

  Read the article

• Updating DataGridView from another Form using BackGroundWorker

  - by FezKazi

  Hi! I Have one Form (LoginForm) which has a Background Worker Monitoring a database for new entries. Then I have another Form (AdminForm) which I need to signal to update its datagrids whenever new data is available. I could poll the database in the AdminForm too, but considering that LoginForm is already doing some polling, which can be costly, I just want to signal AdminForm to update the DataGridViews with the new data. You may ask, why is LoginForm doing the polling when youre showing the stuff in the AdminForm? Well, LoginForm is actually processing the data and sending it over the Serial Port :$ heheh. I want it to be able to process the data without having an administrator logged in all the time.

  Read the article

• Linux machine can't find its tape drive

  - by Kyle Hodgson

  I have an older HP NetServer LPr with what is apparently a Symbios SCSI card connecting to a Quantum SuperLoader 3 that is DLT based. From time to time, we seem to lose the connection to the autoloader. It's usually due to flaky power, but not totally sure why; sometimes when this happens the Autoloader's LED's are orange and it needs to be power cycled. The annoying workaround currently is to reboot the machine. As it is our production VPN and DNS server in addition to being our backup server, this is less than optimal. In Debian (Sarge) is there not some command one can type to get the card to notice that it has the autoloader connected again? dcr1:/proc# grep -i symbios /proc/pci SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 1). dcr1:/proc# uname -a Linux dcr1 2.4.27-3-686 #1 Tue Dec 5 21:03:54 UTC 2006 i686 GNU/Linux dcr1:/proc# mt status mt: /dev/tape: No such device dcr1:/proc# ls -l /dev/tape lrwxrwxrwx 1 root root 8 2007-02-07 16:01 /dev/tape -> /dev/st0 dcr1:/proc# That mt status command will show the actual st0 status when things are working correctly. The No such device message is usually the second clue that we need to reboot - the first clue is usually that the backups didn't run.

  Read the article

• T-SQL IsNumeric() and Linq-to-SQL

  - by cdonner

  I need to find the highest value from the database that satisfies a certain formatting convention. Specifically, I would like to fund the highest value that looks like EU999999 ('9' being any digit) select max(col) will return something like 'EUZ...' for instance that I want to exclude. The following query does the trick, but I can't produce this via Linq-to-SQL. There seems to be no translation for the isnumeric() function in SQL Server. select max(col) from table where col like 'EU%' and 1=isnumeric(replace(col, 'EU', '')) Writing a database function, stored procedure, or anything else of that nature is far down the list of my preferred solutions, because this table is central to my app and I cannot easily replace the table object with something else. What's the next-best solution?

  Read the article

• Win Server 2k and Win 7 client

  - by Ray Kruse

  I have a Win Server 2000 system with AD configured. The network consists of an OKI printer, a network server, a wifi router a Win 2k client and the server. I'm trying to connect a Win 7 client. The purpose of the network, besides sharing equipment is to move files from client to client and scatter backups over more than 1 machine. The Win 7 client is configured for DHCP and does in fact receive it's IP and DNS configuration from the server and it sees the printer, wifi router and network drive, but does not see the Win 2k client nor the Win 2k server. I have tried the LAN Management Authentication Level set to 'Send LM & NTLM responses' with the 128 bit encryption removed. I've also done the registry hack on the key 'LmCompatibilityLevel'. Neither of these have helped. I have two questions: Is there a fix or is Win 2k totally incompatible? Is the best (or quickest/cheapest) fix to upgrade the server to Win 2k3 and not worry about the Win 2k client? Thanks for any help. Ray Kruse Buffalo, KY

  Read the article

• vb.net program cannot connect to wampserver

  - by user225269

  I have a vb.net program that uses mysql as its database. And it works when the computer has wampservr installed. But the program gets an unhandled exception error when the computer where its running does not have a wampserver. The only thing that is installed in it is the mysql connector net. How do I make it work. I just want the two programs to access the same mysql database. I already opened port 20 by configuring firewall. Both in TCP and UDP. What do I do? Do I have to tweak the codes?

  Read the article

• How do I insert into a unique key into a table?

  - by Ben McCormack

  I want to insert data into a table where I don't know the next unique key that I need. I'm not sure how to format my INSERT query so that the value of the Key field is 1 greater than the maximum value for the key in the table. I know this is a hack, but I'm just running a quick test against a database and need to make sure I always send over a Unique key. Here's the SQL I have so far: INSERT INTO [CMS2000].[dbo].[aDataTypesTest] ([KeyFld] ,[Int1]) VALUES ((SELECT Max([KeyFld]) FROM [dbo].[aDataTypesTest]) + 1 ,1) which errors out with: Msg 1046, Level 15, State 1, Line 5 Subqueries are not allowed in this context. Only scalar expressions are allowed. I'm not able to modify the underlying database table. What do I need to do to ensure a unique insert in my INSERT SQL code?

  Read the article

• How to use LIKE query in sqlite & iPhone

  - by 4thSpace

  I'm using the following for a LIKE query. Is this technique for LIKE correct? selectstmtSearch = nil; if(selectstmtSearch == nil){ const char *sql = "SELECT col1, col2 FROM table1 t1 JOIN table2 t2 ON t1.cityid = t2.cityid where t1.cityname like ?001 order by t1.cityname"; if(sqlite3_prepare_v2(databaseSearch, sql, -1, &selectstmtSearch, NULL) == SQLITE_OK) { sqlite3_bind_text(selectstmtSearch, 1, [[NSString stringWithFormat:@"%%%@%%", searchText] UTF8String], -1, SQLITE_TRANSIENT); } } The problem I'm having is after a few uses of this, I get an error 14 on sqlite3_open(), which is unable to open database. If I replace the LIKE with something such as: SELECT col1, col2 FROM table1 t1 JOIN table2 t2 ON t1.cityid = t2.cityid where t1.cityname = ? order by t1.cityname It works fine. I do open/close the DB before after the above code. Is there a way to troubleshoot exactly why the database can't be opened and what its relationship to my LIKE syntax is?

  Read the article

• What to consider if using triggers on tables in a sql-server merge replication

  - by Ice

  Hi, i am driving since some years a sql-server2000 merge-replication over three locations. Triggers do a lot of work in this database. i got no troubles. Now migrating these database to a brand new sql2008, i got some issues about the triggers. They are firing even if the merge-agent does his work. Is there anybody who has some experience with that kind of stuff on sql2008-server? Can anybody confirm that different behaviour to sql2000? Peace Ice

  Read the article

• Membership provider stopped working on using Membership Provider in ASP.Net MVC

  - by Michael Meadows

  I have a production ASP.Net MVC application that has been using the membership service. It has worked fine, up until today. Nothing has changed on the server, but I now have this error: System.Configuration.Provider.ProviderException: The 'System.Web.Security.SqlMembershipProvider' requires a database schema compatible with schema version '1'. However, the current database schema is not compatible with this version. You may need to either install a compatible schema with aspnet_regsql.exe (available in the framework installation directory), or upgrade the provider to a newer version. I checked the asp_schemaversions table, and it looks fine. Please any help would be appreciated.

  Read the article

• Let MySQL users create databases, but allow access to only their own databases

  - by eikes

  I want to have multiple a MySQL users to be able to issue commands like CREATE DATABASE dbTest; But I also want each of these users to be able to see and access only their own databases. All I could find was how to either create the databases by a DBA and grant the privileges on this database to the specific user: GRANT ALL PRIVILEGES ON dbTest.* TO 'user'; or grant privileges on all databases to a user: GRANT ALL PRIVILEGES ON *.* TO 'user'; But neither is what I want, because it needs to scale and be secure.

  Read the article

• I want to port my delicious bookmarks to my website

  - by puneet

  I started building a app that will automatically download my delicious bookmarks, and save to a database, so they I can view them on my own website in my favoured format. I am forced to use oAuth, as I have a yahoo id to login to delicious. The problem is I am stuck at the point where oAuth requires a user to manually go and authenticate. Is there a code/ guidelines available anywhere I can follow? All I want is a way to automatically save my bookmarks to my database. Any help is appreciated. I can work on java, .net and php. Thanks.

  Read the article

• Using a PreparedStatement to persist an array of Java Enums to an array of Postgres Enums

  - by McGin

  I have a Java Enum: public enum Equipment { Hood, Blinkers, ToungTie, CheekPieces, Visor, EyeShield, None;} and a corresponding Postgres enum: CREATE TYPE equipment AS ENUM ('Hood', 'Blinkers', 'ToungTie', 'CheekPieces', 'Visor', 'EyeShield', 'None'); Within my database I have a table which has a column containing an array of "equipment" items: CREATE TABLE "Entry" ( id bigint NOT NULL DEFAULT nextval('seq'::regclass), "date" character(10) NOT NULL, equipment equipment[] ); And finally when I am running my application I have an array of the "Equipment" enums which I want to persist to the database using a Prepared Statement, and for the life of me I can't figure out how to do it. StringBuffer sb = new StringBuffer("insert into \"Entry\" "); sb.append("( \"date\", \"equipment \" )"); sb.append(" values ( ?, ? )"); PreparedStatement ps = db.prepareStatement(sb.toString()); ps.setString("2010-10-10"); ps.set???????????

  Read the article

• Oracle JDBC connection exception in Solaris but not Windows?

  - by lupefiasco

  I have some Java code that connects to an Oracle database using DriverManager.getConnection(). It works just fine on my Windows XP machine. However, when running the same code on a Solaris machine, I get the following exception. Both machines can reach the database machine on the network. I have included the Oracle trace logs. Mar 23, 2010 12:12:33 PM org.apache.commons.configuration.ConfigurationUtils locate FINE: ConfigurationUtils.locate(): base is /users/theUser/ADCompare, name is props.txt Mar 23, 2010 12:12:33 PM org.apache.commons.configuration.ConfigurationUtils locate FINE: Loading configuration from the path /users/theUser/ADCompare/props.txt Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver connect FINE: OracleDriver.connect(url=jdbc:oracle:thin:@//theServer:1521/theService, info) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver connect FINER: OracleDriver.connect() walletLocation:(null) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver parseUrl FINER: OracleDriver.parseUrl(url=jdbc:oracle:thin:@//theServer:1521/theService) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver parseUrl FINER: sub_sub_index=12, end=46, next_colon_index=16, user=17, slash=18, at_sign=17 Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver parseUrl FINER: OracleDriver.parseUrl(url):return Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.OracleDriver connect FINER: user=theUser, password=******, database=//theServer:1521/theService, protocol=thin, prefetch=null, batch=null, accumulate batch result =true, remarks=null, synonyms=null Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection <init> FINE: PhysicalConnection.PhysicalConnection(ur="jdbc:oracle:thin:@//theServer:1521/theService", us="theUser", p="******", db="//theServer:1521/theService", info) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection <init> FINEST: PhysicalConnection.PhysicalConnection() : connectionProperties={user=theUser, password=******, protocol=thin} Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection initialize FINE: PhysicalConnection.initialize(ur="jdbc:oracle:thin:@//theServer:1521/theService", us="theUser", access) Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection initialize FINE: PhysicalConnection.initialize(ur, us):return Mar 23, 2010 12:12:33 PM oracle.jdbc.driver.PhysicalConnection needLine FINE: PhysicalConnection.needLine()--no return java.lang.ArrayIndexOutOfBoundsException: 31 at oracle.net.nl.NVTokens.parseTokens(Unknown Source) at oracle.net.nl.NVFactory.createNVPair(Unknown Source) at oracle.net.nl.NLParamParser.addNLPListElement(Unknown Source) at oracle.net.nl.NLParamParser.initializeNlpa(Unknown Source) at oracle.net.nl.NLParamParser.<init>(Unknown Source) at oracle.net.resolver.TNSNamesNamingAdapter.loadFile(Unknown Source) at oracle.net.resolver.TNSNamesNamingAdapter.checkAndReload(Unknown Source) at oracle.net.resolver.TNSNamesNamingAdapter.resolve(Unknown Source) at oracle.net.resolver.NameResolver.resolveName(Unknown Source) at oracle.net.resolver.AddrResolution.resolveAndExecute(Unknown Source) at oracle.net.ns.NSProtocol.establishConnection(Unknown Source) at oracle.net.ns.NSProtocol.connect(Unknown Source) at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1037) at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:282) at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:468) at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165) at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35) at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:839) at java.sql.DriverManager.getConnection(DriverManager.java:582) at java.sql.DriverManager.getConnection(DriverManager.java:185) The above exception is also thrown if I use OracleDataSource instead of the generic DriverManager.getConnection(). Any ideas on why the behavior is different in the different environments?

  Read the article

• SharePoint Backup/Restore without stsadm

  - by Kevin

  Due to problems we found with the restore of sites/site collections using stsadm (our tasks generated from workflows were not restored), we've taken a different route for backup/restore. We plan a major customization to our SP site and want to take a backup so we can rollback in case the install fails. In our System Testing (not production) environment, we've backed up the 12 hive, the virtual dir's that the IIS points to SharePoint, and the SharePoint databases in SQL (using SQL server to do the db backups). We have custom event handlers and workflows built with Visual Studio, and deploy the dlls to the GAC as version 2 (signed and versioned in Visual Studio). So when we deploy, the GAC will contain 2 versions of the workflows - version 1 and version 2. During the deploy we use SP stsadm features to install/activate the WF's. We also go to each library and add the new, version 2 WFs. This automatically sets the version 1 WF's to "Not Allow" new instances (which is what we want) and the version 2 as active - perfect so far. When we've completed the install, we then assume a failure and attempt to restore to the same machines (SharePoint on one server, SQL on another). We start by uninstalling the version 2 WF's from the GAC, reset IIS (to clear cache of these ver. 2 WF dlls'), restore the 12-hive and virtual directory folders, then restore the SQL dbs. This is all just as manual as you read it - no stsadm here. All seems to work after our restore, it appears the restore was successful - the mods we made to column names, data changes, etc during the install are all reverted back to the original pre-install state. With one exception. When we run a workflow, it always fails and the Logs in the 12-hive indicates the WF is still trying to use the version 2 of the dll (System.IO file not found error) We think we've backed up and restored all the moving pieces of Sharepoint but we're missing something here, does anybody have any ideas why the version 2 WF dlls are still being referenced eventhough we restored all the folders and db's of SharePoint? Thanks, Kevin

  Read the article

• Faster bulk inserts in sqlite3?

  - by scubabbl

  I have a file of about 30000 lines of data I want to load into a sqlite3 database. Is there a faster way that generating insert statements for each line of data? The data is space delimited and maps directly to the sqlite3 table. Is there any sort of bulk insert method for adding volume data to a database? Has anyone devised some deviously wonderful way of doing this if it's not built in? I should preface this by asking is there a c++ way to do it from the API? Thanks.

  Read the article

< Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >