Search Results

Search found 19962 results on 799 pages for 'edo post'.

Page 590/799 | < Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >

• 2012 R2 services will not start after promotion to Domain Controller

  - by Cybersylum

  Having a peculiar issue promoting a Windows 2012 R2 server in a domain at 2003 domain/forest functional level. Built a new 2012 R2 server, added the following software (labtech, appassure, eset A/V, & Teamviewer). It activated and appeared to be working fine. I added the Active Directory Domain Services role, and completed the configuration (Domain/Forest Prep, and DC promotion). All appeared to go well. I rebooted the server, and that's where the peculiar stuff began. I noticed the server indicated it needed activated again; but would not accept the key. I verified the key was good. That's when I noticed the Software Protection service (as well as many other core services - Base Filtering engine, DHCP client, firewall, etc) would not start. The error message for all of them was "Access Denied". I called MS, and they wanted to troubleshoot at a service level. Their fix was to use procmon and identify the resource that needed permissions (registry key, file or folder) and add "everyone" with full control). That got the services to start; but the problem re-appeared after a reboot. Thinking the issue might have been with the anti-virus package during the promotion process, I rebuilt the DCs from scratch and removed the metadata from AD (as I could not demote the machines "rpc server unavailble"). I tried to promote the newly built machines again. The only changes to the brand new machines being critical updates. Again the promotion appeared to work fine; but upon reboot (and a long wait to allow replication to occur) similar problems began to re-appear. I have verified that the schema updates are correct (schema version is 69 - for Windows 2012 R2). I am not finding much about this issue through my own searches, so I thought I would post this to see if anyone else has seen anything similar...

  Read the article

• How to route between 2 networks with a server with 2 network cards?

  - by LumenAlbum

  This is the first time I am faced with routing and it seems I have hit a dead end. I have the following scenario: client1: 192.168.1.10 255.255.255.0 gateway: 192.168.1.100 DNS server: 192.168.1.100 client2: 192.168.1.20 255.255.255.0 gateway: 192.168.1.100 DNS server: 192.168.1.100 server (Windows Server 2008 R2 with enabled RAS & Routing Services) network card 1 (connected to a switch along with the clients) 192.168.1.100 255.255.255.0 DNS server: 127.0.0.1 network card 2 (connected to the router) 192.168.2.100 255.255.255.0 gateway: 192.168.2.1 DNS server: 127.0.0.1 (DNS forwarding to 192.168.2.1) ISP router (with connection to internet) 192.168.2.1 Now in this scenario I have tried to route traffic from the 192.168.1.0/24 network with the clients to the 192.168.2.0/24 network with the routers to connect them to the internet. However, no matter what I do I get no positive ping to the router 192.168.2.1. Ping from 192.168.168.1.10 to 192.168.1.20: Success to 192.168.1.100: Success to 192.168.2.100: Success to 192.168.2.1: not reachable The routing table contains the 2 routes 192.168.1.0 and 192.168.2.0 as directly connected. Does anyone know where the routing fails? I have searched different forums but mostly found nothing relevant. One post however pointed out that in a similar situation the problem was that the router doesn't know the way back and the internet router would need a static route back to the first router. If that really is the case, I take it there is no solution with my equipment, because the standart ISP router doesn't allow to set any static routes.

  Read the article

• Problem with ubuntu 10.10 running from USB drive

  - by Surjya Narayana Padhi

  I recently downloaded Ubuntu 10.10 and created an USB drive with that. I started to run the Ubuntu from that USB drive. But I am facing so much problem. I am thinking why its not so much easy like Windows to do all my job in ubuntu. Always I get some error message or to install something. This time I am getting the following errors. I am trying to download and install Aircrack-ng. So used the command sudo apt-get install aircrack-ng. But the installation stops with the following error : update-initramfs: deferring update (trigger activated) cp: cannot stat `/vmlinuz': No such file or directory dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1) I don't even have the aptitude command installed till now. Are all these errors because of I am running the ubuntu from USB drive? Is there any simple and easy way to go to Ubuntu Software Center and download all the required essentials at one shot and then Aircrack-ng? I could not find the Aircrack-ng in Ubuntu Software Center Can anybody give me detail steps to solve all my problems above. I am frustrated searching for updates and installations. When something works and something does not work. Can anybody suggest me how I should proceed after installing ubuntu to run on a USB drive. So that I can use the OS like Windows. Like software download,wireless driver, sound, video, documents, C:, D: all things should be there. Please somebody help.

  Read the article

• Starting old computer - nothing shown on screen at boot

  - by Jonas

  I'm trying to start an about 10 years old PC computer. But nothing is shown on the screen, and it beeps everytime I press a key on the keyboard. I can press Ctrl+Alt+Del to reboot the computer. The monitor is newer and seem to work with other computers. I don't see anything from POST/BIOS at start or later. I have tried to change to another graphic card, but it didn't change anything. What can I do to solve this problem? Update: I have now tried with another computer (the one where the "another graphic card" came from) and I got the same problem. I doesn't show anything on the screen. Both these computers had a GeForce2 MX 400 graphic card. I tried with another computer screen it didn't work - it was showing "signal out of range". So is the graphic card GeForce2 MX 400 too old for newer TFT-monitors? I tried with a third computer so I know that the monitors are working, and both monitors work fine with that computer.

  Read the article

• How To Boot with "mem=1024m" Argument using GRUB - Ubuntu 10.04

  - by nicorellius

  I am still working on this question. This new one is a different question so I thought it would be good to post a new question. Is this the proper protocol or should I have just edited the other question? I'm running Ubuntu 10.04 with the kernel 2.6.32-22-generic on a Toshiba Satellite laptop. When I enter the GRUB menu (I have Ubuntu 9.10 installed as well), I can choose which kernel to boot. I use scroll down to the one I want and press "e" and I expect to be able to enter mem=1024m and force the kernel to use this much memory. But when I run cat /proc/meminfo or look in the process manager after booting wth this argument I still see all the RAM: ~2 GB. Am I using this boot argument incorrectly? The boot configuration (before I add anything) looks like this: insmod ext2 set root=(hd0,1) search --no-floppy --fs-uuid --set 10270f21-1c42-494b-bd3f-813c23f6d\ 518 linux /boot/vmlinuz-2.6.32-22-generic root=UUID=10270f21-1c42-494b-b\ d3f-813c23f6d518 ro quiet splash initrd /boot/initrd.img-2.6.32-22-generic The way I did this was that I added the mem=1024m after the last line and pressed Ctrl+x (Emacs save and boot the kernel) and the system booted. I tried adding mem=1024m to the end and the beginning of this list and it appeared to not change the RAM allocation.

  Read the article

• How does Subnetting Work?

  - by Kyle Brandt

  How does Subnetting Work, and How do you do it by hand or in your head? Can someone explain both conceptually and with several examples? Server Fault gets lots of subnetting homework questions, so we could use an answer to point them to on Server Fault itself. What is classless routing and why is class-based routing obsolete? If I have a network, how do I figure out how to split it up? If I am given a netmask, how do I know what the network Range is for it? Sometimes there is a slash followed by a number, what is that number? Sometimes there is a subnet mask, but also a wildcard mask, they seem like the same thing but they are different? Someone mentioned something about knowing binary for this? What is NAT (Network Address Translation). Not looking for links to other sites (unless maybe you have one post with a bunch of good ones). I already know how to subnet, I just thought it would be nice if Server Fault had a generic subnetting answer.

  Read the article

• Fortigate restrict traffic through one external IP

  - by Tom O'Connor

  I've got a fortigate 400A at a client's site. They've got a /26 from British Telecom, and we're using 4 of those IPs as a NAT Pool. Is there a way to say that traffic from 172.18.4.40-45 can only ever come out of (and hence go back into) x.x.x.140 as the external IP? We're having some problems with SIP which looks like it's coming out of one, and trying to go back into another. I tried enabling asymmetric routing, didn't work. I tried setting a VIP, but even when I did that, it didn't appear to do anything. Any ideas? I can probably post some firewall snippets if need be.. Tell me what you want to see. SIP ALG config system settings set sip-helper disable set sip-nat-trace disable set sip-tcp-port 5061 set sip-udp-port 5061 set multicast-forward enable end Interesting Sidenote VoIP phones, with no special configuration can register fine to proxy.sipgate.co.uk, which has an IP address of 217.10.79.16. Which is cool. Two phones are using a different provider, whose proxy IP address is 178.255.x.x. These phones can register for outbound, but inbound INVITEs never make it to the phone. Is it possible that the Fortigate is having trouble with 178.255.x.x as it's got a 255 in it? Or am I just imagining things?

  Read the article

• Developer hardware autonomy in a managed desktop environment [closed]

  - by Troy Hunt

  I’m looking for some feedback on how developer PCs are managed within environments that have a strict managed desktop policy (normally large corporations). For example, many corporate environments control the installation of software and the deployment of patches and virus updates through a centralised channel. This usually means also dictating the OS version and architecture (32 bit versus 64 bit) which will likely also mean standardised hardware configurations. I’m particularly interested in feedback from developers who work in this sort of environment but have a high degree of autonomy over their machines. This might mean choosing your own hardware vendor, OS type and version and perhaps how the machines are built and maintained. I have several specific questions: How do you satisfy the needs of security, governance etc whilst maintaining your autonomy? For example, how do you address concerns about keeping virus definitions and OS patches up to date? Do you have a process for gaining exemption from standard desktop builds and if so, what do you need to demonstrate in order to get this? How have you justified this need to the decision makers? Essentially, what is the benefit to your role as a developer by having this degree of autonomy? Thanks very much everyone. Update: There's a great post from Jean-Paul Boodhoo which addresses the developer tool component of the quesiton here: http://blog.jpboodhoo.com/TheFallacyOfTheStandardizedDeveloperMachineimage.aspx

  Read the article

• 'The rpc server is unavailable' or 'access is denied' error when using Remote desktop Services Manager on Windows 7 (but mstsc.exe works!)

  - by tbone

  I am trying to connect to a Windows XP workstation from a Windows 7 Ultimate workstation using Remote Desktop Services Manager. I am able to do a Remote Desktop (mstsc.exe) session from the Win7 machine to the WinXP machine with no problem at all. When running the Remote Desktops Admin (tsmmc.msc) too on a Windows XP box, I can also connect with no problem. However, when I use the new Remote Desktop Services Manager on Windows 7 and try to connect, I get the error: "The rpc server is unavailable" What could cause this? Has there been some fundamental change in Remote Desktop Services Manager, does it connect in a different way somehow? Update #1 Turned off firewall on the Windows XP box and the "The rpc server is unavailable" error went away; so RDSM seems to be using an entirely new port/connection/service compared to mstsc.exe or the old Remote Desktops Admin tool. Now... after disabling the firewall, I get a new error: Access is Denied. After doing some googling, I found some articles discussing this; basically, the error is very misleading - the actual problem is, if either side of the connection has dual monitors, and they are not both Win7 Ultimate, then you cannot connect using Remote Desktop Services Manager...the reason is, by default it uses the /multimon switch, and this switch requires a certain level of Windows license - and, there seems to be no way of changing this default (if anyone knows of a way to change this default, please post an answer or comment!). Nice going Microsoft. http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2rds/thread/4d06278f-e0f4-4f8e-a8e1-3697ee967ef4 http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Windows_7/Q_26225743.html

  Read the article

• P2V Wouldn't Boot, Rebuilt initrd, Need to Clean Up

  - by Mike Soule

  We have a CentOS 5.4 server (build 2.6.18-164.el5xen). We went to P2V this server so we can have redundancy, the physical only has one PSU. The P2V only completed 99% of the way, we have a VMWare ticket opened, but they marked the ticket as low priority. I was able to boot into a rescue disc of Red Hat 5.4 and rebuild the initrd with the help of this blog post. Now the only issue is the original server had a modified initrd, which was also from a different OS build and made by an outside provider. We do not have a document outlining modifications. My question is, is it at all possible to copy the initrd off of the physical server and replace it on the virtual and some how have the virtual machine boot? Thanks for any input. Edit: I copied the initrd img from the physical and it recreated the original issue. Here is a screen capture of the error. http://i.imgur.com/MqC73.jpg Edit2: echo Scanning logical volumes lvm vgscan --ignorelockingfailure echo Activating logical volumes lvm vgchange -ay --ignorelockingfailure VolGroup00 resume /dev/VolGroup00/LogVol01 echo Creating root device. mkrootdev -t ext3 -o defaults,ro /dev/VolGroup00/LogVol00 echo Mounting root filesystem. mount /sysroot

  Read the article

• Apache Server with memcache, varnish and php slow request times

  - by coolestdude1

  My issue is that these servers are taking rather long for request about 2 seconds on average just to serve files. When we had just one server doing everything it was noticeably faster even with the same web app (Drupal 6 and Drupal 7). I want to get this number down to a reasonable level and so I need some help getting to the bottom of why the request times are so slow. This can cause the webapp to hang on post or put and generally leads to a bad user experience on my sites. PS: I am more of a server newbie so this has confounded me for quite some time. The domains: collabornation.net nptrainingworks.com (they run off the same two webservers using vhost configs) The Gear: Two Rackspace 4 Gig servers running CentOS 6.2 Final They have a mounted file system (gluster) that is used to keep files the same on both machines. They are behind a rackspace load balancer running round robin. Mysql is run using php-pdo and php-mysql as such mysql is run on another instance running memcache on that machine with phpMyAdmin located there as well. Apache version number 2.2.15-15.el6.centos.1 (httpd.x86_64) Varnish version number 3.0.2-1.el5 (varnish.x86_64) PHP version number 5.3.14-1.el6.remi (php.x86_64) Configs Linked Below Apache Conf Vhost Conf Varnish Backends Varnish Defaults Varnish Acl PHP INI Again need some help, much appreciated!

  Read the article

• Fresh install CentOS 6.4 64b with directadmin slowly consumes all memory and crashes

  - by Coen Ponsen

  Dear server fault community, This is my first question on server fault, i'm new to server (mis)configuration so please forgive me for asking something stupid :) I'm running Directadmin on a CentOS 6.4 64b with 4GB memory and over 10000Gh virtual machine. I migrated my websites because my former vps couldn't keep up anymore. Only half of the websites from this 1GB machine were migrated jet. So the migration is still in progress and already my server crashes every day. The server performance up until that moment is perfect. The directadmin log files show nothing out of the ordinary. Yesterday only the mysql server crashed but it also crashed the entire machine before. The memory usage in DA seems to be normal: directadmin directadmin (pid 3923 22158 22159 22160 22161 22162 )8.75 MB dovecot dovecot (pid 3851 ) 47.8 MB exim exim (pid 1350 ) 1.29 MB httpd (pid 21525 21528 21529 21530 21531 21532 21546 21571 21742 21743 21744 )490.4 MB mysqld mysqld (pid 1299 ) 287.8 MB named named (pid 3807 ) 16.3 MB proftpd proftpd (pid 1481 ) 1.91 MB sshd sshd (pid 1173 21494 ) 5.16 MB Restarting services immediately frees up memory, but slowly over time the memory usage increases(about 24 hours to crash). The commands: # sync # echo 3 > /proc/sys/vm/drop_caches Will free al memory correct. I could just create a cronjob but it seems the wrong way around to me. I can't seem to pinpoint the cause. Any advices, references or tips are highly appreciated! Greetings, Coen edit: free -m : after drop_caches: total used free shared buffers cached Mem: 3830 735 3095 0 0 21 -/+ buffers/cache: 712 3117 Swap: 991 0 991 I'll post another one this evening.

  Read the article

• Measuring performance indicators on a cluster

  - by Aditya Singh

  My architecture is based on Amazon. A ELB load balancer balances POST requests among m1.large instances. Every instance has a nginx server on port 80 which distributes the requests to 4 python-tornado servers on backend which handle the request. These tornado servers are taking about 5 - 10ms to respond to one request but this is the internal compute time of every request. I want to put this thing on test and i want to measure the response time from ELB to upstream and back and how does it vary when the QPS throughput is increased and plot a graph of Time vs. QPS vs. Latency and other factors like CPU and Memory. Is there a software to do that or should i log everything somewhere with latency checks and then analyze the whole log to get the stuff out. I would also need to write a self-monitor which keeps checking the whole response time. Is it possible to do it with a script from within the server. If so, will it be accurate ?

  Read the article

• Use GRUB/GRUB2 to PXE boot OS image

  - by Jack

  Asked this in stackoverflow but they recommended I post this here: Here is the situation I am in: I currently have a Windows drive that boots XP. The BIOS does not support PXE booting so this is out of the question. Therefore, I was thinking I could install a customized GRUB bootloader on it instead such that it will have the option to PXE boot an image from a DHCP server connected to it and have the option to load Windows as it normally does (two items in menu). The catch is it may need to be automated (meaning no keyboard), so is there any way to run a script pre-boot during GRUB loading that determines if DHCP / TFTP servers are running and attempt to PXE boot an image from the network (and if not, say timeout of 10 seconds, regularly boot from Windows drive)? If this is not possible, what are some other options / suggestions? I was reading up on grub4dos as well but I'm not sure that is what I need. FWIW, I'm free to do whatever I want to the drive. I'd really appreciate some help on this as I'm not sure where to start. Thanks!

  Read the article

• Do I need to update some of my Debian Squeeze software?

  - by stan31337

  I have installed Debian 6, and LAMP stack from squeeze repository (default). After upgrading Apache 2.2.16 from unstable repository to 2.2.22, thanks to this post - how to upgrade already installed apache2 on debian (lenny) I'm thinking to upgrade all other software packages that I've previously installd from squeeze repository. Should I upgrade them to the ones from unstable repository? Should I upgrade all of them or just selected ones? Here's the list: * arno-iptables-firewall 1.9.2.k-4 >> 2.0.1.c-1 * bind9 1:9.7.3.dfsg-1~squeeze6 >> 1:9.8.1.dfsg.P1-4.2 * php-apc 3.1.3p1-2 >> 3.1.13-1 * fail2ban 0.8.4-3+squeeze1 >> 0.8.6-3 * exim4 4.72-6+squeeze2 >> 4.80-4 * altermime 0.3.10-4 >> 0.3.10-7 * rrdtool 1.4.3-1 >> 1.4.7-2 * vsftpd 2.3.2-3+squeeze2 >> 3.0.0-4 Also I would like to ask how to upgrade 5.3.3 5.3.16, unstable repository has 5.4.x versions only, I don't think I'm ready to move from 5.3 to 5.4 yet. Actually I'm a newbie in Linux, and after Windows experience I have a paranoidal idea to update software to the latest release. I'd be glad for any suggestions and recommendations! Thank you very much!

  Read the article

• Apache suddenly very slow on http and faster on https

  - by hsnm

  Background: I have Apache 2 running on ubuntu. There is a low usage on it and mostly being accessed for a web service URL from mobile apps. It was working fine until I installed SSL certificates. I now have both http and https. When I access the server using https, I get a fairly quick response (but probably not as fast as before). When I use http, it's so slow. What I tried: From this post: I curl localhost from the host and it takes some time, meaning there is no routing issue. The server runs on Amazon EC2 instance and is managed by me only. Also: I see that Apache once running, creates the maximum number of processes it is allowed to, which was not the case before. I lowered the MaxClients to 20 and I think I'm getting faster responses but it still takes over a minute and I always have MaxClients Apache processes. dmesg returns many [ 1953.655703] TCP: Possible SYN flooding on port 80. Sending cookies. When I netstat I get many entries with SYN_RECV. Possibly a DDoS attack? From EC2's monitoring diagrams I see a pattern of high "Maximum Network In (Bytes)" since 2 days ago. By the way the server is still being tested, the actual traffic is very low and not consistent. I tried to go with this solution to limit incoming connections using iptables, still no luck, but I'm trying. Question: What could be the problem? Is this a DDoS attack?

  Read the article

• Upgrading PHP, MySQL old-passwords issue

  - by Rushyo

  I've inherited a Windows 2k3 server running an XAMPP-installation from the stone age. I needed to upgrade PHP to facilitate an upgrade to MediaWiki to facilitate a new MediaWiki extension (to facilitate some documentation to facilitate doing my job to facilitate getting paid to facilit... you get the idea). However... installing a new version of PHP resulted in PHP's MySQL libraries refusing to communicate using MySQL's 'old style' 152-bit passwords. Not a problem in theory. The MySQL installation is post-4.1, so it should have the functionality to upgrade the user's passwords from 152-bit to 328-bit (what a weird hashing algorithm...). I ran the following: SET PASSWORD = PASSWORD('foo'); on MySQL but querying: SELECT user, password FROM mysql.user; returned just the same password I started out with - 152-bit. Now... I suspect you're thinking 'AHA! old-passwords is on!'. Unfortunately it's not - I've disabled it in the configuration (explicitly set it to 0), made doubly sure I have an absolute reference to that configuration file and ensured the service isn't using the --old-passwords flag. The service was reset after each and every operation. So I went onto another system and generated the 328-bit hash on there, copying the hash over to the first MySQL instance. Unfortunately, that didn't work either (I did remember to FLUSH PRIVILEGES). The application error is: "'mysqlnd cannot connect to MySQL 4.1+ using the old insecure authentication. Please use an administration tool [...snip...] Is there anything else I can try to get PHP to recognise MySQL as not using the 'old insecure authentication'? MySQL seems to be stuck in 'old-passwords' mode and I can't get it out of it.

  Read the article

• Gaming blew fuse: how to overcome?

  - by George Tomlinson

  I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting.

  Read the article

• Win 7 Remote Desktop connection failure when already logged in.

  - by Andy E

  I have a bit of a strange problem, magnified recently by my broadband dropouts. I wasn't sure whether to post this on SU or SF, so I thought I'd start here as more users would be likely to know what the problem is. In short, when I try and connect to my server (Windows Server 2008) from my laptop running Windows 7, I can only connect if my remote account was previously logged out. If I'm still logged in I get the error message: Windows cannot connect to the remote server. No explanation or anything. If my IP address is the same, I don't have this problem. If I boot up Windows XP Mode and run XP's remote desktop connection it works just fine -- I think the difference there is it takes me to the remote server's logon screen. With Win 7 RDC you never see the logon screen, it asks you for credentials before entering full screen mode. The real problem is that I'm having random broadband dropouts and my IP isn't static. If I logon via Win XP RDC, log out and then run Win 7 RDC then it works fine. I realize I can just use Win XP's RDC for now, but I don't really like keeping XP Mode open if I can help it. Does anyone know a way around this problem? Maybe forcing Win 7 RDC to go to the logon screen, or changing some server-side settings to work around the IP address issue?

  Read the article

• Recommendation for a simple no-frills Windows PDF printer driver?

  - by Scott Bussinger

  I'm looking for an extremely simple Windows PDF printer driver that I can recommend to clients. Ideally it would have these characteristics: When you print something, it should just create it as a temporary file and then display it in their default PDF viewer with no prompting. If they want to save it, they can save it manually from inside the viewer. This workflow should be with no special post-install configuration. Installation should be very simple. A double click the installation program and click "Finish" sort of thing. No complicated multi-step installation, no asking questions your grandmother wouldn't know the answer to (preferably no questions at all), no extra crap being installed. An option for a completely silent installation would be nice, but not necessary. Ideally it would be free to simplify their installing on a small network, but low cost is an option. I've tried a quite a few but none really fit the bill. Some can achieve the first goal but only after careful configuration, some try to install extra toolbars, some have other installation complexities that would make it hard for extremely novice users to succeed. Any suggestions? Thanks!

  Read the article

• Home Network Stopped Working

  - by James

  I have a home network where a machine running Windows 7 Ultimate N acts as a central hub for other devices to access media. This has been running for around 2 years now and there has been no recent configuration changes. The machine has a static IP address (192.168.0.3), which also has not been changed. A few laptops, Sonos music system and mobiles are using the machine for music/video mostly. Additionally, post 3389 was also open for RDP. I used a no-ip agent to map a hostname so I could RDP to the machine from the internet. As of yesterday when I try to ping the machine, I get PING:Transmit Failed, General Error I noticed however, the IP it is pinging is 0.0.2.233. All shares etc are no longer functioning including RDP. On the machine itself, an IP config shows like nothing has changed. It still shows the expected IP. If I ping itself from its hostname, I get the same error as above. machine has been rebooted, the router has been also. Any ideas where to even start on this?

  Read the article

• Win 7 firewall won't turn on, nor the McAfee firewall. Hit by "Win 7 Anti-virus 2012" trojan. Removed, but a downed firewall is a lasting legacy

  - by PhxTitan

  I caught the Trojan right away, I think, but both my McAfee & Win 7 (x64) firewalls are not able to be engaged/turned on now. MS Error Code 0x80070424 when attempting to turn on Win 7 firewall. No viruses. Swept it with McAfee AV, Malwarebytes Anti-Malware, Microsoft malware removal tools. Followed Microsoft's three courses of alternative actions they posted for instructions for getting the Win 7 firewall back up and on. Nothing. Same error code. The post just said see MS support if those fixes failed. So I removed McAfee altogether. Still Win 7 (professional version) firewall won't come on; and clean of detectable bugs. And I'm fully updated with MS Windows 7 updates as well, which is no longer automatic, that too a legacy of the trojan bug I think. Any thoughts on how to get the Win 7 firewall operational??? And auto updating reengaged?

  Read the article

• Why is my new PC so slow at startup?

  - by rumtscho

  Bought a new PC this weekend, and it works really good. Only I have one big problem: startup time. Its BIOS needs 62 sec to load, then from Grub start to pw entering screen it's another 26 sec. I think this is a lot, because my old PC needs 34 sec for BIOS and another 8 sec to pw screen. After I enter the pw, the desktop is usable with practically no delay on both. The new PC is a core i7-930, running a Lucid Lynx 64 bit from a Intel Postville SSD (no internal HDs). The old PC is a Pentium 4 celeron (forgot the clock speed) running a Lucid Lynx 32 bit from an ATA 100 hard drive. Neither PC is overclocked. The new one has boot sequence 1.DVD ROM, 2.SSD (connected over SATA in AHCI mode), 3. removable drive. The old one boots from 1. DVD ROM, 2. HDD, 3. Floppy. Neither has a second OS installed. The new one has less software installed than the old one (I think), but the boot time difference was noticeable even before I made any installs. As far as I know, just the SSD should be enough to make a noticeable difference in boot time. I thought that having a good mainboard on the new PC as opposed to the basic office model on the old one would also mean a faster loading BIOS. If these assumptions are right, I guess I must have misconfigured something in the BIOS of the new PC. How should I configure it for a fast boot? It has an ASUS P6X58D board with an AMI BIOS, if you need the BIOS revision number I could post that too.

  Read the article

• How do you link a time stamp to a cell using a userform button control? [migrated]

  - by Chad Cochrane

  Hello fellow VB Developers/Users/Hobbyists/What-Have-You! I have a user form that has two buttons: 1. Start 2. Stop When I press start, I would like it to record the current time with this format: (dd/mm/yy hh:nn:ss:) in a specific column. Then when I press the Stop Button I would like it to record the time again in the cell next to it. Then if I press start Again I would like it to record below the first cells current record. Basically I am building a timer to record data to see how long certain tasks take. I will post the excel file and provide more information were necessary. Thanks for any help provided. CURRENT CODE Public runTimer As Double Public startTime As Date Dim counter As Date Sub setStart() counter = 0 startTime = Now runTimer = Now + TimeSerial(0, 0, 1) Application.OnTime runTimer, "setStart", , True Set myTime = Sheet4.Range("F1") Set timeRng = Sheet4.Range("C8:C100") i = WorksheetFunction.CountA(timeRng) i = i + 1 Cells(i, "C") = myTime Sheet4.Cells(i, "C").NumberFormat = "yyyy/mm/dd HH:mm:ss" If i >= 2 Then Cells(i, "D8") = Cells(i, "C8") - Cells(i - 1, "C8") Sheet4.Cells(i, "C").NumberFormat = "yyyy/mm/dd HH:mm:ss" End If Application.EnableEvents = False End Sub Sub setStop() Application.OnTime runTimer, "setStop", , True Set myTime = Sheet4.Range("F1") Set timeRng = Sheet4.Range("D8:D100") i = WorksheetFunction.CountA(timeRng) i = i + 1 Application.EnableEvents = False Cells(i, "D") = myTime Sheet4.Cells(i, "D").NumberFormat = "yyyy/mm/dd HH:mm:ss" End Sub

  Read the article

• What to do with old laptop screens?

  - by Lord Torgamus

  This question is inspired by another SU question I came across earlier today: What to do with old hard drives? It made me think about two long-dead laptops I have with perfectly good screens still inside. One is a Dell Inspiron 5100 and the other is an Averatec E1200, but responses need not be geared towards those particular models' screens. Rules, based heavily on the original question's: Objectives and suggestions to keep in mind when you post an answer : Should showcase your geekiness, be plain ol' fun, serve a social purpose or benefit the community. Your answer need not be limited to only one screen. For a really good answer, I'll go out and buy additional leftover screens. Your answer need not be limited to one project per screen. If additional accessories need be purchased, make sure they are common. Don't tell me to get a moon rock or something. The projects you suggested should serve a useful purpose; art is nice, but functional art is way better. Thanks in advance, folks. EDIT: Found another related question. Fun projects to do with an old 17" LCD monitor EDIT 2: I, for one, am enjoying the new outpouring of creativity here. Best fifty bucks... I mean, rep points... I ever spent. EDIT 3: That does it. At the end of the week, there was a tie for most votes between the accepted answer and the game platform answer. The game platform answer was cooler, but less reasonable as a project to actually do; in other words, it was more moon rocky. Unfortunately, I think fencepost had the best comment on the topic, which is that displays on their own have no good interface. Thanks for playing, everyone!

  Read the article

< Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >