Search Results

Search found 89593 results on 3584 pages for 'user'.

Page 592/3584 | < Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >

  • disk-to-disk backup without costly backup redundancy?

    - by AaronLS
    A good backup strategy involves a combination of 1) disconnected backups/snapshots that will not be affected by bugs, viruses, and/or security breaches 2) geographically distributed backups to protect against local disasters 3) testing backups to ensure that they can be restored as needed Generally I take an onsite backup daily, and an offsite backup weekly, and do test restores periodically. In the rare circumstance that I need to restore files, I do some from the local backup. Should a catastrophic event destroy the servers and local backups, then the offsite weekly tape backup would be used to restore the files. I don't need multiple offsite backups with redundancy. I ALREADY HAVE REDUNDANCY THROUGH THE USE OF BOTH LOCAL AND REMOTE BACKUPS. I have recovery blocks and par files with the backups, so I already have protection against a small percentage of corrupt bits. I perform test restores to ensure the backups function properly. Should the remote backups experience a dataloss, I can replace them with one of the local backups. There are historical offsite backups as well, so if a dataloss was not noticed for a few weeks(such as a bug/security breach/virus), the data could be restored from an older backup. By doing this, the only scenario that poses a risk to complete data loss would be one where both the local, remote, and servers all experienced a data loss in the same time period. I'm willing to risk that happening since the odds of that trifecta negligibly small, and the data isn't THAT valuable to me. So I hope I have emphasized that I don't need redundancy in my offsite backups because I have covered all the bases. I know this exact technique is employed by numerous businesses. Of course there are some that take multiple offsite backups, because the data is so incredibly valuable that they don't even want to risk that trifecta disaster, but in the majority of cases the trifecta disaster is an accepted risk. I HAD TO COVER ALL THIS BECAUSE SOME PEOPLE DON'T READ!!! I think I have justified my backup strategy and the majority of businesses who use offsite tape backups do not have any additional redundancy beyond what is mentioned above(recovery blocks, par files, historical snapshots). Now I would like to eliminate the use of tapes for offsite backups, and instead use a backup service. Most however are extremely costly for $/gb/month storage. I don't mind paying for transfer bandwidth, but the cost of storage is way to high. All of them advertise that they maintain backups of the data, and I imagine they use RAID as well. Obviously if you were using them to host servers this would all be necessary, but for my scenario, I am simply replacing my offsite backups with such a service. So there is no need for RAID, and absolutely no value in another layer of backups of backups. My one and only question: "Are there online data-storage/backup services that do not use redundancy or offer backups(backups of my backups) as part of their packages, and thus are more reasonably priced?" NOT my question: "Is this a flawed strategy?" I don't care if you think this is a good strategy or not. I know it pretty standard. Very few people make an extra copy of their offsite backups. They already have local backups that they can use to replace the remote backups if something catastrophic happens at the remote site. Please limit your responses to the question posed. Sorry if I seem a little abrasive, but I had some trolls in my last post who didn't read my requirements nor my question, and were trying to go off answering a totally different question. I made it pretty clear, but didn't try to justify my strategy, because I didn't ask about whether my strategy was justifyable. So I apologize if this was lengthy, as it really didn't need to be, but since there are so many trolls here who try to sidetrack questions by responding without addressing the question at hand.

    Read the article

  • Macbook sleep issues

    - by 1passenger
    Since a few days ago the sleep modus on my Macbook isn't working anymore, and I don't know why. After 10 minutes the Macbook isn't falling to sleep as expected. Does anyone have the same problem or have an idea how to solve this problem? The OS on the Macbook is Snow Leopard 10.6.2.

    Read the article

  • Deleting a single file from the trash in Mac OS X Snow Leopard

    - by SteveTheOcean
    In earlier versions of Mac OS X one could delete a file from the trash by opening a terminal window and typing rm ~/.Trash/file_i_want_to_delete. See this previous post. Unlike earlier versions in Mac OS X Snow Leopard one can "put back" a file from the trash into its original directory. Will the rm trick still work? Testing shows it does delete the file but what happens to the "put back" information that specifies the directory from which the file was deleted?

    Read the article

  • Multi language support in wireshark

    - by Ajay
    Do we have multiple language support with Wireshark. We are using Windows Xp SP2 and Ubuntu Linux environment. Actually we have a plugin which is UDP based and we have a requirement to Analyse the Information in Packet List Pane and Packet Details Pane to be viewed in other languages like French, German, Italian etc ... So is it possible with Wireshark version - 1.2.0. For e.g. Can we also have all the Menu Items etc ... all text in Wireshark which is there in English to be seen in French, German and Italian.

    Read the article

  • Lenovo Wi-Fi Replacement

    - by user22910
    I recently got my T500 with a very poor signal Wi-Fi, Thinkpad BGN, a Realtek chipset. I would like to replace my Wi-Fi card with either the Intel WiFi Link 5100 or 5300. However, I read somewhere that Lenovo specfically "whitelist" their Wi-Fi cards to only work with their laptops. I could not find any of the Intel Wi-Fi, moreover any Wi-Fi cards on the Lenovo site. So, I went to hunt around in Amazon and found several sellers. Plus what sort of card do I require? There is a difference between mini cards and the full sized card, though I do not know which one my laptop supports. Here are the specifications for my laptop: http://privatepaste.com/8b0537bce0 I would like to have confirmation which one of these specific cards as posted below will work on my laptop (or the one you recommend to have): Intel Wifi Link 5300 Intel WiFi Link 5100 - Network adapter - PCI Express Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft 2.0) Intel WiFi Link 5100 - Network adapter - PCI Express Half Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft) Intel WiFi Link 5300 - Network adapter - PCI Express Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft)

    Read the article

  • Samsung 530U3C clean system installation

    - by user1292810
    I have bought Samsung 530U3C notebook with i5-3317/12GB RAM/500GB HDD/24GB ExpressCache/Windows 8 preinstalled. I would like to install my own clean version of Win8. But I would like to preserve recovery partition. I will sell this laptop in probably 1-1.5 year and I would like to be able to restore settings to factory ones. What is more, in the future I would like to install Ubuntu as well, but Windows goes first. At the moment discs and partitions looks like below (sorry for non English screen): http://i.stack.imgur.com/p4W6t.jpg DISC 0: 500MB - recovery partition 300MB - system partition 442.22GB - Drive C: - Boot, Page File, Crash Dump, Primary partition 21.64GB - recovery partition 1.00GB - recovery partition DISC 1: 9.00GB - primary partition 13.24GB - primary partition Which partitions can I format and which of them should I preserve? Can I format and merge partitions from that 24GB ExpressCache and install Windows on it?

    Read the article

  • Batch rename folders?

    - by Margaret
    This is probably a super-simple already solved task, but: I have a series of folders containing eBooks in various formats. They have the folder name format: \Lastname, Firstname (n books)\ I want to rename each of the folders to be simply \Firstname Lastname\ which I'm guessing can be done with a batch file fairly easily, but it's been a very long time since I had to do string parsing so I have no recollection of how. Help? I'm using Windows 7.

    Read the article

  • Using (Squid) Caching Proxy with (HideMyAss) OpenVPN VPN

    - by wajed
    I've set up Squid proxy, and I confirmed it's working on my PC. Note: To be able to use the Internet with better speed, I have to forward to another parent proxy (my university's proxy). Now I'm using HideMyAss VPN (OpenVPN protocol), but without the squid, since I don't know how to configure them to work correctly. Note: I'm using the university's proxy in HideMyAss VPN software so that I get good Internet connection, but if I use squid's proxy, it doesn't work.

    Read the article

  • itunes can't see iphone after reinstalled leopard

    - by Joseph SG
    My Mac harddisk died so I replaced it and installed OS to Leopard 10.5.8. Problem now, iTunes doesn't see my iPhone 3GS at all. (iPhoto works just fine) but iTunes is blind. I have too much info on my iPhone, I don't wish to restore/reset it and wish to get everything from my iPhone sync'd into iTunes afresh. How can I do that? Thanks. Joseph

    Read the article

  • Can't add a network printer - Windows 7

    - by r0ca
    Hi all, I have an HP 2600n installed on a SBS2003 server. This printer works fine when I print from the server itself and also from my Windows 7 computer #1. From my Windows 7 #2, it doesn't work. I get the error message that I need to install the driver. The error message is in french but here it the translation. No drivers has been found Windows is unable to find a driver for HP Color Laserjet 2600n on the network. To find a driver manually, click ok. If not, click on cancel and contact your sys adm. I reinstalled from scratch the printer, deleted the driver... Still no luck Any takers?

    Read the article

  • IP Tables won't save the rule.

    - by ArchUser
    Hello, I'm using ArchLinux and I have an IP tables rule that I know works (from my other server), and it's in /etc/iptables/iptables.rules, it's the only rule set in that directory. I run, /etc/rc.d/iptables save, then /etc/rc.d/iptables/restart, but when I do "iptables --list", I get ACCEPTs on INPUT,FORWARD & OUTPUT. # Generated by iptables-save v1.4.8 on Sat Jan 8 18:42:50 2011 *filter :INPUT DROP [0:0] :FORWARD DROP [0:0] :OUTPUT ACCEPT [216:14865] :BRUTEGUARD - [0:0] :interfaces - [0:0] :open - [0:0] -A INPUT -p icmp -m icmp --icmp-type 18 -j DROP -A INPUT -p icmp -m icmp --icmp-type 17 -j DROP -A INPUT -p icmp -m icmp --icmp-type 10 -j DROP -A INPUT -p icmp -m icmp --icmp-type 9 -j DROP -A INPUT -p icmp -m icmp --icmp-type 5 -j DROP -A INPUT -p icmp -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -j interfaces -A INPUT -j open -A INPUT -p tcp -j REJECT --reject-with tcp-reset -A INPUT -p udp -j REJECT --reject-with icmp-port-unreachable -A INPUT -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -j DROP -A INPUT -f -j DROP -A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG FIN,SYN,RST,PSH,ACK,URG -j DROP -A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j DROP -A INPUT -i eth+ -p icmp -m icmp --icmp-type 8 -j DROP -A BRUTEGUARD -m recent --set --name BF --rsource -A BRUTEGUARD -m recent --update --seconds 600 --hitcount 20 --name BF --rsource -j LOG --log-prefix "[BRUTEFORCE ATTEMPT] " --log-level 6 -A BRUTEGUARD -m recent --update --seconds 600 --hitcount 20 --name BF --rsource -j DROP -A interfaces -i lo -j ACCEPT -A open -p tcp -m tcp --dport 80 -j ACCEPT -A open -p tcp -m tcp --dport 10011 -j ACCEPT -A open -p udp -m udp --dport 9987 -j ACCEPT -A open -p tcp -m tcp --dport 30033 -j ACCEPT -A open -p tcp -m tcp --dport 8000 -j ACCEPT -A open -p tcp -m tcp --dport 8001 -j ACCEPT -A open -s 76.119.125.61 -p tcp -m tcp --dport 21 -j ACCEPT -A open -s 76.119.125.61 -p tcp -m tcp --dport 3306 -j ACCEPT -A open -p tcp -m tcp --dport 22 -j BRUTEGUARD -A open -s 76.119.125.61 -p tcp -m tcp --dport 22 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT COMMIT # Completed on Sat Jan 8 18:42:50 2011

    Read the article

  • Disable "longhaul" kernel module with a GRUB command?

    - by Julian Schweigert
    I've got a problem with a VIA C3 (1GHz)-system: the system freezes immediately when the CPU frequency goes under 731MHz because of an incompatibility with the (not completely implemented) i686 commands and a powersave feature of the kernel. There is a workaround: deactivate the "longhaul" kernelmodule via alias longhaul off in /etc/modprobe.d/aliases. But the system freezes before I can install any Linux distribution - even Clonezilla freezes. Is there a possibility to deactivate the module with a GRUB boot parameter before the kernel is loaded?

    Read the article

  • Simple ASP.Net MVC 1.0 Validation

    - by Mike
    On the current project we are working on we haven't upgraded to MVC 2.0 yet so I'm working on implementing some simple validation with the tools available in 1.0. I'm looking for feedback on the way I'm doing this. I have a model that represents a user profile. Inside that model I have a method that will validate all the fields and such. What I want to do is pass a controller to the validation method so that the model can set the model validation property in the controller. The goal is to get the validation from the controller into the model. Here is a quick example public FooController : Controller { public ActionResult Edit(User user) { user.ValidateModel(this); if (ModelState.IsValid) ....... ....... } } And my model validation signature is like public void ValidateModel(Controller currentState) What issues can you see with this? Am I way out to lunch on how I want to do this?

    Read the article

  • Building new computer, turns on, but no post

    - by addybojangles
    Pardon my ignorance here, finally decided to put together a computer and egads. I purchased a new motherboard, power supply, processor, video card and memory. ASUS M4A79XTD EVO AM3 AMD 790X ATX AMD Motherboard OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 / EPS12V SLI Ready 80 PLUS Certified Modular Active PFC Power Supply AMD Phenom II X4 965 Black Edition Deneb 3.4GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 125W Quad-Core Processor XFX HD-577A-ZNFC Radeon HD 5770 (Juniper XT) 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ (originally had links for you guys, but I lack the rep, sorry!!) And I've got it all in the tower. I put in power supply, installed processor on motherboard, installed heatsink, put in ram, and I am using an older IDE hard disk. When I start the computer, the monitor tells me "check signal cable." As far as I can tell, the heatsink on the processor is spinning, the power supply is on (obviously), and the green LED on the motherboard is on. I originally only had the bigger output plugged in to the motherboard (what I saw in a YouTube vid as well as the mobo instructions), but after doing some research, it said plug in the other ATX power supply. Which I did. And trying to power the computer results in nothing. No beeps on startup, no post, anyone have any ideas? Your ideas and help is greatly appreciated.

    Read the article

  • Even googling not allowed ? Why ?

    - by sagar
    Please read message bellow. Access has been denied 127.0.0.1! Access to the page: http://www.google.co.in/search?hl=en&client=firefox-a&hs=F58&rls=org.mozilla%3Aen-US%3Aofficial&q=email+us&meta=&aq=f&aqi=g10&aql=&oq=&gs_rfai= ... has been denied for the following reason: Weighted phrase limit exceeded. By reading above message, you can easily understand that - it's a firewall message. I also know that. The problem is "Firewall" is allowing any kind of googling. But when I google "email us" - above message is displayed. My question is why does this happen ? ( means - why googling not allowed on this words ? ) ( Please don't tell that - contact your system administrator. ) What does this mean - Weighted phrase limit exceeded. ? sagar.

    Read the article

  • Windows Updates - Does Not Install, how can I remove it

    - by Kanini
    Everytime I shutdown my Windows XP, it comes up with the following screen which says "Turn Off with Installing Updates" (Of course, it also gives me an option as follows, "Click here to turn off without installing updates.") Now, when I do normal shutdown asking it to Install Updates and Turn it Off. It does not install the updates and every subsequent time I try to shut down the PC, it still comes with the prompt "Turn Off with Installing Updates". I managed to find out that this install was this "Installing Microsoft SQL Server 2005 Express Edition Service Pack 3 (KB955706) update 1 of 1 .... " Now, when I click on the Installing Updates icon (the yellow icon, that appears on the task bar near the clock), and Install it. It tries to install and it fails. Now, why is this install alone failing? Second, if we are not able to ascertain why this is failing, can we at least ensure that it is removed from the list of possible installs so that everytime it does not ask me to install it.

    Read the article

  • Migrating Email to new hosting.

    - by Ben C
    I've made a site for a charity, and now have to move hosting for them. They have 5 or so email addresses on their current hosting account, which will of course need to move too. What's the best way to migrate their email addresses to the new server without too much hassle for them? They use POP3, so should I just create the account on the new server and then get them to update their settings? That won't remove their old emails from Outlook Express, will it?

    Read the article

  • iPod touch has extremely slow wifi, drops packets - only on my router

    - by mskfisher
    I just purchased an iPod Touch. I am having a lot of trouble with its speeds on my Tenda W311R, but it has no speed problems on my neighbor's Netgear router. It will connect and authenticate to my network, but the Speed Test app from speedtest.net shows rates near 20-50 kbps. If I run the speed test immediately after powering the iPod on, it will get speeds of 10-20 Mbps, like it should - but the speeds slow down to the kbps range abut 10-15 seconds afterward. I get the same behavior with encryption and without encryption, and regardless of N, G, or B compatibility settings in the router. I've tried rebooting the iPod and resetting the network settings, but it's still slow. I've tried pinging the iPod from another computer, and it shows about 40% packet loss: $ ping 192.168.0.111 PING 192.168.0.111 (192.168.0.111): 56 data bytes 64 bytes from 192.168.0.111: icmp_seq=0 ttl=64 time=14.188 ms 64 bytes from 192.168.0.111: icmp_seq=1 ttl=64 time=11.556 ms 64 bytes from 192.168.0.111: icmp_seq=2 ttl=64 time=5.675 ms 64 bytes from 192.168.0.111: icmp_seq=3 ttl=64 time=5.721 ms Request timeout for icmp_seq 4 64 bytes from 192.168.0.111: icmp_seq=5 ttl=64 time=6.491 ms Request timeout for icmp_seq 6 64 bytes from 192.168.0.111: icmp_seq=7 ttl=64 time=8.065 ms Request timeout for icmp_seq 8 Request timeout for icmp_seq 9 Request timeout for icmp_seq 10 64 bytes from 192.168.0.111: icmp_seq=11 ttl=64 time=9.605 ms Signal strength is good - I'm never more than 20 feet from my access point, and it exhibits the same behavior if I'm standing next to the router. It works just well enough to receive text, but videos don't work at all. App downloads are hit and miss. I've tweaked just about all of the settings I can see to tweak, and I'm at a loss. I have also been searching Google for the past three days, all to no avail. Any suggestions?

    Read the article

< Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >