Search Results

Search found 27819 results on 1113 pages for 'linux intel'.

Page 593/1113 | < Previous Page | 589 590 591 592 593 594 595 596 597 598 599 600  | Next Page >

• How to install Grub2 under several common scenarios

  - by Huckle

  I feel the community has long needed a clean guide on how to install Grub2 under a a few extremely common scenarios. I will accept answer as solved when it has one section per scenario and assumes nothing other than what is specified. Please add to the existing answer, wiki style, keeping to the original assumptions. Rules: 1. You cannot, at any point in the answer, invoke Ubiquity (the Ubuntu installer). 2. I strongly recommend not using any automatic boor-repair tools as they're not very educational Scenario 1: Non-booting Linux OS, No boot partition, Fix from Live CD Setup: /dev/sda1 is formatted ext* /dev/sda2 is formatted linux_swap /dev/sda1 doesn't boot because MBR is scrambled and /boot/* was erased Explain: How to boot to a Live CD / USB and restore Grub2 to the MBR and /boot of /dev/sda1 Scenario 2: Non-booting Linux OS, Boot partition, Fix from Live CD Setup: /dev/sda1 is formatted fat /dev/sda2 is formatted ext* /dev/sda3 is formatted linux_swap /dev/sda2 doesn't boot because the MBR is scrambled and /dev/sda1 was formatted Explain: How to boot to a Live CD / USB and restore Grub2 to the MBR and /dev/sda1 and then update the fstab on /dev/sda2 Scenario 3: Install on to thumb drive, Booting various OSes, From Linux OS Setup: /dev/sdb is removable media /dev/sdb1 is formatted fat /dev/sdb2 is formatted ext* /dev/sdb3 is formatted fat The MBR of /dev/sdb is otherwise not initialized You are executing from a Linux based OS installed on /dev/sda Explain: How to install Grub2 on to /dev/sdb1, mark /dev/sdb1 active, be able to chose between /dev/sdb2 and /dev/sdb3 on boot. Scenario 4: (Bonus) Install on to thumb drive, Booting ISO, From Linux OS Setup: /dev/sdb is removable media /dev/sdb1 is formatted fat /dev/sdb1 contains /iso/live.iso /dev/sdb2 is formatted ext* /dev/sdb3 is formatted fat The MBR of /dev/sdb is otherwise not initialized You are executing from a Linux based OS installed on /dev/sda Explain: How to install Grub2 on to /dev/sdb1, mark /dev/sdb1 active, be able to chose between /dev/sdb2, /dev/sdb3, and /iso/live.iso on boot.

  Read the article

• How to rip AVI from VOB using ffmpeg

  - by Linux Jedi

  I am trying to convert a VOB to an AVI. I have ripped an AVI from this VOB before using ffmpeg, but for some reason it's not working this time. This is what I tried: ffmpeg -sameq -acodec copy -i VTS_01_2.VOB output.avi This is the output I get: FFmpeg version 0.6.1, Copyright (c) 2000-2010 the FFmpeg developers built on Dec 29 2010 18:02:10 with gcc 4.2.1 (Apple Inc. build 5664) configuration: libavutil 50.15. 1 / 50.15. 1 libavcodec 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0.11. 0 / 0.11. 0 [mpeg2video @ 0x101014200]mpeg_decode_postinit() failure Last message repeated 6 times Input #0, mpeg, from 'VTS_01_2.VOB': Duration: 26:30:29.20, start: 140.171311, bitrate: 90 kb/s Stream #0.0[0x1e0]: Video: mpeg2video, yuv420p, 720x480 [PAR 32:27 DAR 16:9], 9800 kb/s, 31.44 fps, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0.1[0xa0]: Audio: pcm_s16be, 48000 Hz, 2 channels, s16, 1536 kb/s Output #0, avi, to 'output.avi': Metadata: ISFT : Lavf52.64.2 Stream #0.0: Video: mpeg4, yuv420p, 720x480 [PAR 32:27 DAR 16:9], q=2-31, 200 kb/s, 29.97 tbn, 29.97 tbc Stream #0.1: Audio: pcm_s16be, 48000 Hz, 2 channels, 1536 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Could not write header for output file #0 (incorrect codec parameters ?)

  Read the article

• route lan traffic through wirless mifi

  - by Randall Blake

  I have a Windows 7 laptop accessing the internet through Verizon wireless MIFI configured as 192.168.1.1. It supports only 5 wireless connections, so I don't want to use up connections unnecessarily. That laptop has an ethernet nic which I have given a static IP of 192.168.0.5. Everything else on the 192.168.0.0 network acquires an address via DHCP from a DLink router whose address is 192.168.0.1. Also on that network are a printer, some network cameras, and a linux pc. The linux pc does not have a wireless card (and I don't want to buy one). The linux pc is located at 192.168.0.122. I can ping the linux pc from the windows pc. But I cannot access the internet from the linux pc. I can ping everything on the 192.168.0.0 network EXCEPT the ethernet card in the Windows PC. It seems as though my DLink router will not route requests to the 192.168.0.5 nic on the windows pc. My windows pc has a default route pointing to the 192.168.1.0 network. It also has a route telling it to route all traffic destined for the 192.168.0.0 network through the 192.168.0.5 interface. I have tried adding a default route to the linux pc to "gateway" 192.168.0.5, but that does not work. I have also tried adding a default route to the linux pc to the gateway 192.168.0.1 (the DLink router) but that will not give me internet access either (over the 192.168.1.0 network). I tried these two different routes at different times - I did not set them both at the same time. I suppose this is a simple problem to solve, but I cannot seem to solve it. How can I give internet access over the 192.168.1.1 MIFI to my linux pc on 192.168.0.122? Thanks EDIT: Additional Info Internet | | MIFI (192.168.1.1) (wireless) | | (192.168.1.3) (wireless) Windows 7 PC Dlink Router (192.168.0.1) ------------ (192.168.0.5) (wired) | | |linux pc (192.168.0.122) (wired) | |printer (192.168.0.100) (wireless) | |network cameras, etc (192.168.0.103) (wireless) Only the windows pc is multi-homed with a wireless nic that connects to the MIFI wirelessly, and an ethernet nic with a wired connection to the DLink router. (The DLink permits both wired and wireless connections.) I don't want to use Windows internet connection sharing because I believe it will set up the ethernet nic as a gateway on 192.168.0.1 and a DHCP server. I already have the Dlink performing that role and I don't want to change that if I do not have to. (The Dlink permits me to make DHCP reservations and I really like that feature. I don't want to lose it.)

  Read the article

• How to handle these variables in rsync exclude file?

  - by linux

  I have an ignore file for rsync but I can't figure out how to ignore this string of file names and the username: backup/cpbackup/daily/username/homedir/mail/cur/1244452567.H511146P7355.dwhs45.dwhs.net,S=2161:2, backup/cpbackup/daily/username/homedir/mail/cur/1244455430.H516330P14494.dwhs45.dwhs.net,S=4062:2, I tried this: backup/cpbackup/daily/*/homedir/mail/cur/* and this: *.*.dwhs45.dwhs.* But of course that would be too easy. Basically I just want to not transfer all the mail in the /cur/ directory for all users to the backups.

  Read the article

• cuda install in ubuntu13.10?

  - by hexiangpeng

  the cuda_install_.log show ERROR: Unable to build the NVIDIA kernel module. ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com. The driver installation is unable to locate the kernel source. Please make sure that the kernel source packages are installed and set up correctly. and the other .log show ^ /tmp/selfgz3964/NVIDIA-Linux-x86-319.37/kernel/nv-i2c.c: In function ‘nv_i2c_del_adapter’: /tmp/selfgz3964/NVIDIA-Linux-x86-319.37/kernel/nv-i2c.c:327:14: error: void value not ignored as it ought to be osstatus = i2c_del_adapter(pI2cAdapter); ^ make[3]: * [/tmp/selfgz3964/NVIDIA-Linux-x86-319.37/kernel/nv-i2c.o] ?? 1 make[2]: * [module/tmp/selfgz3964/NVIDIA-Linux-x86-319.37/kernel] ?? 2 NVIDIA: left KBUILD. nvidia.ko failed to build! make[1]: * [module] ?? 1 make: * [module] ?? 2 - Error. ERROR: Unable to build the NVIDIA kernel module. ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com. i don't understand

  Read the article

• How to boot live iso images?

  - by virpara

  I found that it can be done with loopback as follows menuentry "Lucid ISO" { loopback loop (hd0,1)/boot/iso/ubuntu-10.04-desktop-i386.iso linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=/boot/iso/ubuntu-10.04-desktop-i386.iso noprompt noeject initrd (loop)/casper/initrd.lz } But it works only with ubuntu or its derivatives. How it should be written if I want to boot other live images like fedora, cent, opensuse etc. ? Edit: I found some other entries but all of them are probably debian based. menuentry "Linux Mint 10 Gnome ISO" { loopback loop /linuxmint10.iso linux (loop)/casper/vmlinuz file=/cdrom/preseed/mint.seed boot=casper initrd=/casper/initrd.lz iso-scan/filename=/linuxmint10.iso noeject noprompt splash -- initrd (loop)/casper/initrd.lz } menuentry "DBAN ISO" { loopback loop /dban.iso linux (loop)/DBAN.BZI nuke="dwipe" iso-scan/filename=/dban.iso silent -- } menuentry "Tinycore ISO" { loopback loop /tinycore.iso linux (loop)/boot/bzImage -- initrd (loop)/boot/tinycore.gz } menuentry "SystemRescueCd" { loopback loop /systemrescuecd.iso linux (loop)/isolinux/rescuecd isoloop=/systemrescuecd.iso setkmap=us docache dostartx initrd (loop)/isolinux/initram.igz } Edit2: How to chainload grub and syslinux from grub2? Edit3: I want to boot other live images without any removable devices and use grub2 so need menu entries specific to grub2.

  Read the article

• Slow transfer speed between two servers

  - by Linux Guy

  I have two servers both network cards speed is 10Gbps The inbound bandwidth between two servers is 10Gbps , the outbound bandwidth internet bandwidth is 500Mpbs Both servers using public ip addresses in public and private network Both servers transfer and connection on nginx port , and the server B used for streaming media , like youtube stream videos I check the transfer speed using iperf utility From Server A to Server B # iperf -c 0.0.0.1 -p 8777 ------------------------------------------------------------ Client connecting to 0.0.0.1, TCP port 8777 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 3] local 0.0.0.0 port 38895 connected with 0.0.0.1 port 8777 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.8 sec 528 KBytes 399 Kbits/sec My Current Connections in Server B # netstat -an|grep ":8777"|awk '/tcp/ {print $6}'|sort -nr| uniq -c 2072 TIME_WAIT 28 SYN_RECV 1 LISTEN 189 LAST_ACK 139 FIN_WAIT2 373 FIN_WAIT1 3381 ESTABLISHED 34 CLOSING Server A Network Card Information Settings for eth0: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: external Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes Server B Network Card Information Settings for eth2: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes The problem is : as you can see from iperf utility, the transfer speed from server A to server B slow when i restart network service the connection will be ok , after 2 minutes , it's getting slow How could i troubleshoot slow speed issue and fix it in server B ? Notice : if there any other commands i should execute in servers for more information, so it might help resolve the problem , let me know in comments

  Read the article

• Android SDK having trouble with ADB

  - by MowDownJoe

  So, I installed the Android SDK, Eclipse, and the ADT. Upon firing up Eclipse the first time after setting up the ADT, this error popped up: [2012-05-29 12:11:06 - adb] /home/drsmith/Downloads/android-sdk-linux/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-05-29 12:11:06 - adb] 'adb version' failed! /home/drsmith/Downloads/android-sdk-linux/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-05-29 12:11:06 - adb] Failed to parse the output of 'adb version': Standard Output was: Error Output was: /home/drsmith/Downloads/android-sdk-linux/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-05-29 12:11:06 - adb] /home/drsmith/Downloads/android-sdk-linux/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-05-29 12:11:06 - adb] 'adb version' failed! /home/drsmith/Downloads/android-sdk-linux/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory [2012-05-29 12:11:06 - adb] Failed to parse the output of 'adb version': Standard Output was: Error Output was: /home/drsmith/Downloads/android-sdk-linux/platform-tools/adb: error while loading shared libraries: libncurses.so.5: cannot open shared object file: No such file or directory I'm not quite sure how this is. Feels weird that there's a missing library there. I'm using Ubuntu 12.04. No adb is a pretty big blow as an Android developer. How do I fix?

  Read the article

• mount another drive to the same directory

  - by Ken Autotron

  I recently purchased a server that was advertised as 2TB (2 1TB drives) in size, when I use it it reports only one of the drives, I would like to be able to use both as if one drive. here is the specs... sudo lshw -C disk *-disk description: ATA Disk product: TOSHIBA DT01ACA1 vendor: Toshiba physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/sda version: MS2O serial: 13EJ81XPS size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=0005b3dd *-disk description: ATA Disk product: TOSHIBA DT01ACA1 vendor: Toshiba physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb version: MS2O serial: 13OX3TKPS size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00030e86 and fdisk -l Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00030e86 Device Boot Start End Blocks Id System /dev/sdb1 * 4096 41947135 20971520 fd Linux raid autodetect /dev/sdb2 41947136 1952468991 955260928 fd Linux raid autodetect /dev/sdb3 1952468992 1953519615 525312 82 Linux swap / Solaris Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0005b3dd Device Boot Start End Blocks Id System /dev/sda1 * 4096 41947135 20971520 fd Linux raid autodetect /dev/sda2 41947136 1952468991 955260928 fd Linux raid autodetect /dev/sda3 1952468992 1953519615 525312 82 Linux swap / Solaris Disk /dev/md2: 978.2 GB, 978187124736 bytes 2 heads, 4 sectors/track, 238815216 cylinders, total 1910521728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/md2 doesn't contain a valid partition table Disk /dev/md1: 21.5 GB, 21474770944 bytes 2 heads, 4 sectors/track, 5242864 cylinders, total 41942912 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/md1 doesn't contain a valid partition table is it possible to mount both drives to say /Home/ so I would have 2TB of usable space?

  Read the article

• Az Oracle üzleti intelligencia csomag Windows Server 2008-on is, a kliens Vista op.rsz-en is

  - by Fekete Zoltán

  Tegnap az Oracle BI Hands On rendezvényen felmerült a kérdés, hogy az Oracle Business Intelligence Enterprise Editon fut-e Windows Server 2008-on. A válasz: IGEN. Az Oracle BI EE fut a Windows Server 2008-on. Emellett a másik kérdésre a válasz: IGEN, a kliens lehet Windows Vista is. Mivel az Oracle BI szerver szoftver, amit egy böngészovel érnek el a felhasználók elemzési, lekérdezés/jelentés/riport- készítési feladatok elvégzésére, ezért az Oracle BI csak szerver operációs rendszerekre van bevizsgálva: Linux, Solaris, HP-UX, AIX és Windows platformokon. A jelenleg támogatott operációs rendszerek: Microsoft Windows 2000/2003 Server; Microsoft Windows Server 2008 Enterprise Edition x86 32 bit2 - Red Hat Enterprise Linux AS 4.x; Red Hat Enterprise Linux Server/Advanced Platform 5 - Novell SUSE 9.x - Oracle Enterprise Linux 4; Oracle Enterprise Linux 5 - Sun Solaris 9 SPARC 32 bit ; Sun Solaris 9 SPARC 64 bit; Sun Solaris 10 SPARC 32 bit; Sun Solaris 10 SPARC 64 bit - AIX 5.2 PowerPC 32 bit; AIX 5.2 PowerPC 64 bit; AIX 5.3 PowerPC 32 bit; AIX 5.3 PowerPC 64 bit; AIX 6.1 PowerPC 32 bit; AIX 6.1 PowerPC 64 bit - HP-UX 11.11 PA-RISC 64 bit; HP-UX 11.23 PA-RISC 64 bit; HP-UX 11.23 Itanium 64 bit; HP-UX 11.31 Itanium 64 bit A böngészos hozzáférést az irányítópultokhoz (dashboard), interaktív elemzo munkához használható operációs rendszerek: Windows, Vista, Linux, Solaris, Apple Mac OS 10.x.

  Read the article

• macbook pro 13"

  - by LINUX

  Hej Bytte nyligen HD 250GB till 640GB 7200rpm nu har jag bara ca.5 tim battery tid ... och HD snurrar hela tiden. hur kan jag sova ner Hd efter t.ex. 5 minuter ? Tack på förhand. English Translation: I recently switched from a 250GB to 640GB 7200rpm hard drive. Now I only have a 5hr battery life and the hard drive is spinning constantly. How can I spin down the hard drive for, for example, 5 minutes? Thanks in advance.

  Read the article

• Switching to a 7200rpm drive -> constant spinning?

  - by LINUX

  Hej Bytte nyligen HD 250GB till 640GB 7200rpm nu har jag bara ca.5 tim battery tid ... och HD snurrar hela tiden. hur kan jag sova ner Hd efter t.ex. 5 minuter ? Tack på förhand. English Translation: I recently switched from a 250GB to 640GB 7200rpm hard drive. Now I only have a 5hr battery life and the hard drive is spinning constantly. How can I spin down the hard drive for, for example, 5 minutes? Thanks in advance.

  Read the article

• Ubuntu 11.04 does not detect my tata photon +

  - by nikhil

  I am trying to connect to the Internet via my photon+ from the past day and have tried various suggestions on the Internet and have tried to zero in to the main cause of the problem which is that my device is not detected. I have tried the following ways: 1) After connecting the device, I tried to create a mobile broadband connection via System Preferences Network Connections and selected tata photon plus. But there was no connection. 2) I did sudo apt-get install usb-modeswitch-data and sudo apt-get install usb-modeswitch But the prompt said that they are at their newest version. 3) I tried to edit the file sudo gedit /etc/usb_modeswitch.d/12d1:1446, but this file did not exist. 4) my lsusb output is nikhil@nikhil:~$ lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 003: ID 22f4:0021 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Any Ideas ??

  Read the article

• How to convert an MKV to AVI with minimal loss

  - by Linux Jedi

  To convert an MKV to AVI, I do two things. The first thing I do is this: ffmpeg -i filename.mkv -vcodec copy -acodec copy output.avi This converts the MKV to an AVI, but the problem is that the video does not play smoothly for some reason. That's fine, because if I do one more thing it gets fixed: ffmpeg -i output.avi -vcodec mpeg4 -b 4000k -acodec mp2 -ab 320k converted.avi After I do this then the file plays without problem. I had success doing it this way for one file, but then I tried it on another file, and there is a slight, but noticeable loss in video quality. This is the output I get when doing the second step: FFmpeg version 0.6.1, Copyright (c) 2000-2010 the FFmpeg developers built on Dec 29 2010 18:02:10 with gcc 4.2.1 (Apple Inc. build 5664) configuration: libavutil 50.15. 1 / 50.15. 1 libavcodec 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0.11. 0 / 0.11. 0 Seems stream 0 codec frame rate differs from container frame rate: 359.00 (359/1) -> 29.92 (359/12) Input #0, avi, from 'output.avi': Metadata: ISFT : Lavf52.64.2 Duration: 00:04:17.21, start: 0.000000, bitrate: 3074 kb/s Stream #0.0: Video: mpeg4, yuv420p, 704x480 [PAR 229:189 DAR 5038:2835], 29.92 fps, 29.92 tbr, 29.92 tbn, 359 tbc Stream #0.1: Audio: vorbis, 48000 Hz, stereo, s16 Output #0, avi, to 'nidome_no_kanojo.avi': Metadata: ISFT : Lavf52.64.2 Stream #0.0: Video: mpeg4, yuv420p, 704x480 [PAR 229:189 DAR 5038:2835], q=2-31, 4000 kb/s, 29.92 tbn, 29.92 tbc Stream #0.1: Audio: mp2, 48000 Hz, stereo, s16, 320 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 I just used arbitrarily large settings on the second step and it worked nicely before but not in this case. What settings should I use?

  Read the article

• Where do I start in regards to making a Gnome/Unity Form Application

  - by JMK

  Ok so I am familiar with developing Form and Console applications on Windows using Visual Studio .Net with C#, but where do I start when it comes to Linux distro's like Ubuntu, is there an equivalent? How would one go about matching what they can do in a Windows environment with .Net and C# in a Linux environment without .Net coding in something like Java or C/C++? I am aware of Eclipse, does eclipse have a form designer or do you have to code the design of any Gnome/Unity forms manually? Can I use eclipse to write the Linux equivalent of a console application, that you just double click on to run? I also know about Mono, but the idea is that I want to learn how to develop software without using anything in the Microsoft stack and am not sure where to start. What is the standard language/framework used to develop these types of applications on Linux? As I become more proficient with Visual Studio, C# and .Net, it has struck me that without these Microsoft tools, I am nothing. I am only capable of developing for the Microsoft OS and this scares me. This isn't some anti Microsoft thing, Microsoft makes some incredible Software/Hardware/Operating Systems/IDE's, but it is generally a bad idea to put all of your eggs in one basket so if I want to learn how to develop Terminal and Gnome/Unity form applications where in the world do I start? I have used Linux on and off for years, but Windows has been my primary OS. However I have watched Linux get better and better and as much as I love Windows 7, I am dubious about Windows 8 (I for one will sorely miss my start menu)! Obviously MS aren't going anywhere anytime soon and I could spend the the next couple of decades developing for .Net without any issues but just because you can get away with something doesn't always mean it's a good idea. Thanks

  Read the article

• How to make Ubuntu recognize an unknown external display (so I can adjust its resolution)?

  - by WagnerAA

  I have a Dell laptop with an external monitor attached (a Samsumg SyncMaster 931c). My laptop display was recognized, and I can adjust its optimum resolution. My external display is still unknown, thus I'm stuck at a lower resolution (1024x768): I tried the "Detect Displays" button, but it didn't work, nothing happens. I recently upgraded from Ubuntu 12.04 to 12.10. Things were working before. I don't know if I can actually change this configuration, or if this is a bug. I searched for an answer here and also in Launchpad's website, but found none. I even tried to install Nvidia drivers, and just messed things up. It seems I wasn't even using nvidia before, as I guessed by looking at my additional drivers configuration: My laptop has an Intel chipset, I guess: $ dpkg --get-selections | grep -i -e nvidia -e intel intel-gpu-tools install libdrm-intel1:amd64 install libdrm-intel1:i386 install nvidia-common install xserver-xorg-video-intel install I don't have an xorg.conf file (I think this is nvidia related, am I right?): $ cat /etc/X11/xorg.conf cat: /etc/X11/xorg.conf: No such file or directory $ ls -l /etc/X11/ total 76 drwxr-xr-x 2 root root 4096 Out 19 23:41 app-defaults drwxr-xr-x 2 root root 4096 Abr 25 2012 cursors -rw-r--r-- 1 root root 18 Abr 25 2012 default-display-manager drwxr-xr-x 4 root root 4096 Abr 25 2012 fonts -rw-r--r-- 1 root root 17394 Dez 3 2009 rgb.txt lrwxrwxrwx 1 root root 13 Mai 1 03:33 X -> /usr/bin/Xorg drwxr-xr-x 3 root root 4096 Out 19 23:41 xinit drwxr-xr-x 2 root root 4096 Jan 23 2012 xkb -rw-r--r-- 1 root root 0 Out 24 08:55 xorg.conf.nvidia-xconfig-original -rwxr-xr-x 1 root root 709 Abr 1 2010 Xreset drwxr-xr-x 2 root root 4096 Out 19 10:08 Xreset.d drwxr-xr-x 2 root root 4096 Out 19 10:08 Xresources -rwxr-xr-x 1 root root 3730 Jan 20 2012 Xsession drwxr-xr-x 2 root root 4096 Out 20 00:11 Xsession.d -rw-r--r-- 1 root root 265 Jul 1 2008 Xsession.options -rw-r--r-- 1 root root 13 Ago 15 06:43 XvMCConfig -rw-r--r-- 1 root root 601 Abr 25 2012 Xwrapper.config Here is some information I gathered by looking at other related posts: $ sudo lshw -C display; lsb_release -a; uname -a *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:48 memory:f6800000-f6bfffff memory:d0000000-dfffffff ioport:1800(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:f6100000-f61fffff LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch:cxx-3.0-amd64:cxx-3.0-noarch:cxx-3.1-amd64:cxx-3.1-noarch:cxx-3.2-amd64:cxx-3.2-noarch:cxx-4.0-amd64:cxx-4.0-noarch:desktop-3.1-amd64:desktop-3.1-noarch:desktop-3.2-amd64:desktop-3.2-noarch:desktop-4.0-amd64:desktop-4.0-noarch:graphics-2.0-amd64:graphics-2.0-noarch:graphics-3.0-amd64:graphics-3.0-noarch:graphics-3.1-amd64:graphics-3.1-noarch:graphics-3.2-amd64:graphics-3.2-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-3.2-amd64:printing-3.2-noarch:printing-4.0-amd64:printing-4.0-noarch:qt4-3.1-amd64:qt4-3.1-noarch Distributor ID: Ubuntu Description: Ubuntu 12.10 Release: 12.10 Codename: quantal Linux Batcave 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ xrandr -q Screen 0: minimum 320 x 200, current 2304 x 800, maximum 32767 x 32767 LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 286mm x 1790mm 1280x800 59.9*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+1280+32 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 DP1 disconnected (normal left inverted right x axis y axis) If there's anything else I can do, any other information I can post here, to help me configure this external display, please let me know. If this is actually a bug, I apologize (I know bugs are not allowed here), but I really wasn't sure. And I will promptly file a bug report in Launchpad if that's the case. Thanks a lot in advance. ;)

  Read the article

• Ubuntu stops using Nvidia driver after kernel upgrade

  - by Daniel

  Just updated and restarted, Ubuntu's doesn't display correctly. After restart, the desktop now looks like this. I've temporarily switched to the Nouveau driver. The update history reveals the kernel was updated, amongst many things; and the following were installed: linux-image-3.5.0-19-generic (3.5.0-19.30) linux-image-extra-3.5.0-19-generic (3.5.0-19.30) I've encountered this type of problem quite recently, so I decided to reapply the same steps, to solve the problem, as follows: sudo apt-get install linux-headers-3.5.0-19 sudo apt-get install linux-headers-3.5.0-19-generic sudo depmod -a sudo modprobe nvidia sudo /etc/init.d/*dm restart When installing linux-headers-3.5.0-19-generic, I get an error, message from terminal as follows: Setting up linux-headers-3.5.0-19-generic (3.5.0-19.30) ... Examining /etc/kernel/header_postinst.d. run-parts: executing /etc/kernel/header_postinst.d/dkms 3.5.0-19-generic /boot/vmlinuz-3.5.0-19-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. However, I ignored the above error and continued the steps with sudo depmod -a, installed nvidia-current, then did sudo modprobe nvidia, which yielded the following error: FATAL: Error inserting nvidia_current (/lib/modules/3.5.0-19-generic/updates/dkms/nvidia_current.ko): No such device Upon restart, the Nvidia driver now works! BTW, do those error messages imply I broke something? Just curious, cause I don't want to get happy I've fixed it, then it stops working later on. The system is Dell XPS-L702X, with NVIDIA GeForce GT 555M, and 17" screen.

  Read the article

• Configure Postfix to use external MX servers for delivery of local mail if user is unknown

  - by mr.b

  I have a following setup: linux box with postfix configured to be responsible for example.com domain domain's MX servers are configured so that mail sent to example.com is sent to google mail servers several user accounts on linux machine exist (same machine also hosts example.com site) When someone from the outside attempts to send mail to address ending with @example.com, it gets routed to google mail (and there handled appropriately). When linux machine tries to send mail to outside world, mail is delivered correctly, as reverse dns and spf records are configured correctly, so linux machine is valid mail sender for example.com domain (along with google mail servers). However, here's the problem. When php application (hosted at linux box) tries to send mail to [email protected] (and someuser doesn't exist on linux box), it fails, since it doesn't even consult google mail servers, but postfix smtp locally concludes that "someuser" is unknown. So, the question is: how do I tell postfix to relay mails sent to @example.com domain to google mail servers (so, to servers specified in MX records), IF and only if a mailbox is not found locally.

  Read the article

• Macbook Pro + Windows: How to make external monitor default monitor for games

  - by Linux Jedi

  When I boot into Windows on my Macbook Pro, I am unable to make the external monitor the default monitor. So when I play games full screen, they automatically open up on my laptop monitor. I want them to open up on my secondary monitor. The only solution I found to this is to make my external monitor mirror my laptop monitor. I can't even close the lid of the laptop monitor because that will cause the system to go to sleep.

  Read the article

• Some info about SD card patitions after the use of the dd statment and some oiters doubts?

  - by AndreaNobili

  I am not very experienced using Linux and I have the following situation that cause me some doubts. I have wrote RaspBian (the RaspBerry linux distribution) on an SD card using Ubuntu dd statment: sudo dd if=2014-01-07-wheezy-raspbian.img of=/dev/sdb bs=1024 So if now I perform the fdisk -l statment I obtain that I have 2 partitions related to my SD card, that are the followins: Dispositivo Boot Start End Blocks Id System /dev/sdb1 8192 122879 57344 c W95 FAT32 (LBA) /dev/sdb2 122880 5785599 2831360 83 Linux And now the first doubt: the dd statment create on the SD card two partitions: 1) /dev/sdb1 that is a litle FAT32 partition (what it means (LBA)?) 2) /dev/sdb2 that is a larger Linux ext3 partition Ok...the doubt is: why it also create to me a FAT32 partition and not only a Linux ext3 partition? Ok...if I go into my computer resource I can see a device (related to my SD card) into the devices list that contains some RaspBian file, following a screenshot: And if I see the property of this device I obtain this: So, looking at the previous screenshot it seems to me that this is the small FAT32 partition, and now I have the followings doubts: If it is the smallest FAT32 partition, what contains? The RaspBian boot or what? Why, in the devices list, I have only the FAT32 partition and not also the Linux one (/dev/sdb2), to see it have I to mount it? how? Tnx

  Read the article

• How to convert a video to 4:3 or 16:9 aspect ratio without loss of video quality

  - by Linux Jedi

  I uploaded my video to youtube and the highest resolution it appears as is 360p. This is much lower than what I uploaded. I believe that youtube isn't making higher resolutions available for my video because of its aspect ratio. The video is 720x400. How can I convert this to a different aspect ratio without losing any of the picture or picture quality? I don't care if blank space appears around the video so long as the picture doesn't get stretched horizontally or vertically.

  Read the article

• Wired connection to windows ISC stopped working

  - by cmpickle

  I have had my Linux box connected to the internet through a Windows computer by wiring them together with a cat5 cable then the Windows is connected wireless to a router. This setup has worked since I got the Linux box but just yesterday stopped working. The changes that occurred were: I changed networking so that I was connecting the Linux box and Windows computer through a second router so during that time the Linux box went through a router to connect to the Windows computer that was still connected wireless to the first router. The Internet didn't work on the Linux box at the time they second router was involved when I removed it and directly connected the Linux box and Windows the Internet worked again. Another thing that changed was that I had disconnected my Windows computer from all network connections and deleted them to make my Ethernet work better. Also at that time my dad had I connect the Windows to a third router and changed some settings in it. After reconnecting this time the connection between the router and the windows would not establish. If anyone has any ideas as to why this is I would greatly appreciate it!

  Read the article

• Text on Cisco ASA console is garbled/missing letters

  - by Some Linux Nerd

  I've actually looked up a number of solutions for this problem and none of them work. There's this Cisco ASA 5505 that I'd like to use, that outputs mildly garbled text with missing characters. I did some googling and found that the most likely problem is a bad baud rate, so I tried all the baud rates, 7N1, 8N2... basically every possibility minicom had. Then I figured (since I can type ok, just not read) that if I factory reset it that it would fix whatever is set wrong with the terminal. That didn't work either. This usb-db9 adapter and console cable work fine on the catalyst switch in our office. My serial settings are 9600 8N1 with no flow control. Anyone know how to fix this? I have an example of the text on pastebin: http://pastebin.com/MAJF0mVU - it's just lots of "Dfaut cnfiuraionfil cotais 1enty." instead of "Default configuration blah blah"

  Read the article

• Error: kernel headers not found. (But they are in place)

  - by Guandalino

  I'm trying to install the Guest Additions in VirtualBox 4.04. Host OS is Ubuntu desktop 11.04 64bit, guest OS is Ubuntu server 11.10 64bit. $ sudo ./VBoxLinuxAdditions.run After some output this line is printed: The headers for the current running kernel were not found. But the headers are installed, at least accordingly to dpkg: $ dpkg --get-selections | grep linux-headers linux-headers-3.0.0-12 install linux-headers-3.0.0-12-server install linux-headers-server install The running kernel is: $ uname -a Linux foobar 3.0.0-12-server #20-Ubuntu SMP Fri Oct 7 16:36:30 UTC 2011 x86_64 x86_64 X86_64 GNU/Linux How do I fix things so that Guest Additions installer is able to find kernel headers? Update: added full output. The headers for the current running kernel were not found. If the module compilation fails then this could be the reason. Building the main Guest Additions module ...done. Building the shared folder support module ...fail! (Look at /var/log/vboxadd-install.log to find out what went wrong) Installing the Window System drivers ...fails! (Could not find the X.Org or XFree86 Window System). I don't care for fail #2, because that's a server and I don't need X server. But I need shared folder support. Some further detail: $ tail /val/log/vboxadd-install.log .......... cc1: some warnings being treated as errors make[2]: *** [/tmp/vbox.0/vfsmod.o] Error 1 make[1]: *** [_module_/tmp/vbox.0] Error 2 make: *** [vboxsf] Error 2

  Read the article

• Booting Ubuntu 12.04 from external eSATA disk

  - by Lord of Scripts

  This is my system topology: Disk #1 (SATA Internal) C: D: (Windows 7 Ultimate) Disk #2 (SATA Internal) E: (Windows Backup) Disk #3 (eSATA External) H: I: (Other windows data) /dev/sdc3 Linux Swap /dev/sdc4 Extended partition /dev/sdc5 Linux / So, I originally had there Ubuntu 8.1 from years ago but never got to use it. Now I used the Ubuntu 12.04 Live CD to install on that same location (That live CD takes a century to boot on a 6GB Intel i7 system...). The installation went fine, I selected it to install on /dev/sdc5 but it never asked me for any boot stuff, where I wanted to install Grub or whatever it is that it uses nowaways (I come from the LILO days when it always worked :-) So, yet again I can't access my new Linux installation. I have to wait a century to boot the "Live" CD and it allows me to see my new installation but I can't do anything with it. I tried the approach of this blog post. Copied the linux.bin of /dev/sdc5 into C: and used the BCDEdit steps to declare the new OS. So when I boot I see the Windows Boot menu and select Linux and after than I only get a black screen with a blinking cursor on the upper left. I can boot into Windows though. So, perhaps it didn't install the boot code on /dev/sdc5? I used this setup years ago booting from Windows with a BIN file: dd if=/dev/sdc5 of=/mnt/share/C/linux.bin bs=512 count=1 I am very reluctant to run GRUB because years ago I did and it wiped out my Windows boot sector and took quite some effort to recover it and be able to boot Windows again. I have been trying to install GRUB on a blank USB stick but I can't find anything clear enough. My system does NOT have a floppy. So can someone give me some ideas about how to get control of my Ubuntu 12.04 installation?

  Read the article

< Previous Page | 589 590 591 592 593 594 595 596 597 598 599 600  | Next Page >