Search Results

Search found 21914 results on 877 pages for 'core services'.

Page 594/877 | < Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >

• FreeBSD Jail own network stack with vimage

  - by bodokaiser

  I want to throw all services from the host system and put them in jails. Unfortunatly this doesn't work for file sharing (e.g. nfsd) because the jails don't have there own network stack by default. I know read something about vimage which would solve this issue. See more in this thread: http://forums.freebsd.org/showthread.php?t=9006 The use of vimage with raw jails should use moreorless but the use with vimage and ezjail makes it hard. Does anyone have experience about this topic and wants to share it? Regards

  Read the article

• High system cpu load (%sys), system locks

  - by Mark

  For the last two weeks we are having intermittent severe spikes in system cpu usage (shown as %sys), which last for maybe half a minute, locking most processes, including ssh. I've been trying to figure this out, but atop doesn't show anything relevant (system usage for processes it shows is insignificant), spikes are intermittent and I could not reproduce the spike using any workload for the web application this webserver hosts. If you have any ideas on how to debug high %sys and (sometimes) %si CPU usage, please share them. System specs (don't know if any of this is relevant): Dedicated server, CentOS 6, core i7 950, consistent 4 to 8 GB RAM free at any time, hard drives are in RAID-1. Additional info: dmesg output doesn't change between spikes /var/log/messages doesn't change between spikes Here is cat /proc/vmstat Here is output of mpstat 1 during a typical spike Add 07.11.11: looks like simple reboot restored system state, and we might never know what caused the disturbance in first place.

  Read the article

• Can I extend my total RAM by buying more, and what kind do I need to buy

  - by Xeon06

  I currently have 4 GB total RAM and I would like to get some more, to bring it to a total of 8 GB. Is it possible to simply buy another 4 GB and bring it to 8? If so, what kind should I be buying? There is a lot of different possibilities, DDR3, DDR2, clock speed, etc. I am kind of lost among all this. My current setup goes like this: ACER EG43M mainboard Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz 4 total RAM slots, 2 occupied by 2 GB sticks According to CPU-Z, my memory type is DDR3 (not sure how reliable that is) Full CPU-Z dump Windows 7 64-bit So basically, I want to know whether it's possible to extend my current RAM to get 8 GB total by buying another 4, and if so, what kind of RAM do I need? Note that I am not looking for shopping recommendations. I'm worried about the hardware compatibility.

  Read the article

• Need reasonably priced router with QoS support [closed]

  - by ULTRA_POROV

  I dont need wireless. I am expecting very heavy traffic, with possibly thousands of tcp connections open at one time. This would require that the router has good hardware. I also need to limit the different services i will provide. Lets say i need to guarantee 60% of all the bandwidth to HTTP, 10% FTP, and 10% for Mail... So the router software must have flexible QoS options as well. I don't know which one to chooose, because this information is usually not given on the router specs.

  Read the article

• Which OS should I boot into for virtualization?

  - by acidzombie24

  This might be a silly question. I use windows 7 99% of the time. I run linux 10% of the time and XP 5% of the time. I am thinking about getting a Intel® Core™ i7-2600 Processor which has hardware support for virtualization. I dont think i want more than one partition. May have a swap partition. Which OS should I make my primary (and only) partition? I suspect windows7 if i am always using it as going through a linux layer would slow it down. Does it matter much which OS i use if i have hardware support for virtualization? At the moment I am using VMWare player. I suspect software doesnt effect performance?

  Read the article

• Can I install linux has the host in a dell poweredge server (r710)?

  - by bksunday

  I might have a deal on dual six core poweredge server and I'm about to go test its performance but I'm wondering few things which I can't find answers for, and I can't test them before buying the machine. I don't want vmware at all so can I just wipe it and install linux instead, or is it embedded in some parts I have no access to. Will I still be able to update different firmwares (perc controllers, motherboard, etc) on this dell poweredge or does it require to have the vmware esxi installed as the host os. And optionally.. is there any foreseeable problems in doing so?

  Read the article

• WSO2 Installation Stops

  - by Nik

  I am only trying to get WSO2 Data Services to start up on an Ubuntu 10.04 LTS server. I have installed Java, set the JAVA_HOME environment variable, and download the binary distribution from WSO2. When I run /opt/wso2dataservices-2.6.2/bin/wso2server.sh, everything seems to start up fine and I can start to navigate to the page. The problem is a few seconds later, the console says Killed and everything stops. Does anybody have any ideas for how I can figure out what's going on? Edit: It seems to stop when I try to access the page, but not on its own.

  Read the article

• Opinion choosing Switch

  - by mastercode

  ) i have to reestruct a LAN network, with (currently) +/- 60hosts connected ... i have File Servers hosted, VoIP Phones,wireless AP's,printers, scanners, plotters,biometric dispositive,and 2 QNAP TS412 as FileServer and BackupServer, a Mac Mini as main Server of almost all services that need server ... and, a HP V1910-24 (L2+) and another two switches,but, only L2. which switch in your opinion, could fit better this reestruct, to ensure a VLAN division- and have to support Inter VLAN routing also - provide better performance, and also, allow a Future expansion. the budget, is low xD hehe!!

  Read the article

• Error code 0x80070035. The network path was not found

  - by user144606

  My system is connected with a local LAN connection with 30 PC's. I'm not able to access the shared drive in the network, but I'm able to ping the IP address in which the drive is present. I have checked to start all the services, which are to be started and i have check the TCP/UDP ports also, but even after that I'm not able to access the drive, the same error message is being displayed again and again. Please help me to rectify the problem. I'm trying to solve the problem for the last 1 week. I have tried various solutions which are present in various web site, but I'm not able to find a proper solution. So please help me.

  Read the article

• Is it possible to put an 8000 series socket-F Opteron into a dual-socket motherboard?

  - by René Kåbis

  Exactly what it says on the Tin. I have a dual-socket, socket-F motherboard in which I am looking to put two high-end quad-core Opterons, but the 2000 series are nearly double the price of the 8000 series on eBay. Can I just drop in a pair of 8000 series processors and be done with it, or are there processor-critical motherboard features that would be present on a quad(+)-socket motherboard that don’t exist on a dual-socket motherboard? Please elaborate or link to resources that can explain this further, as I am not adverse to research (and I am interested in the technical issues involved) I am probably using the wrong search terms, as Google failed to return anything within the first few dozen results.

  Read the article

• Wired and Wireless Network Duplication

  - by Dave

  Howdy! Running into an issue when some of our client's have their laptop's connected via the wired ethernet network aswell as on the WLAN of the same network. There is know issues caused to the end clients.. BUT! Being a Managed Services Engineer i get pretty over the alerts that come through on our reports for machine's with the same hostname on the same network! We are not going to remove this monitoring because it does help a lot with detecting and stopping inferior users and things like that. So basically.. Question is, is there a way in Windows (third party programs welcome) to disable the wireless network when a wired network is connected and operational.. I know that Windows automticaly 'prefers' the wired network, however they are still both connected and therfore there is duplicate hostnames on the same network. Could also have stupid issues with DNS and things like that! Thanks!

  Read the article

• How many xml http requests is too much for a pc to handle?

  - by Uri

  I'm running mediawiki on an apache on a regular pc running vista (don't know the specific specs, but I'm guessing at least duo core 2 2 giga hertz processor, broadband connection (500 kb/s at least, probably 1 mega). I want to use the MediaWiki api to send a lot of requests to this server. Most of the time the requests will be sent through LAN (but sometimes through the internet). I'm talking thousands of requests every few seconds at worst case. (A lot of these requests may repeat themselves, I guess some sort of cache would help) Will the server handle this, or do I need a stronger/dedicated computer? (I'm not looking for specific yes/no, but just want to get an idea as to what configuration of computer will support how many request per second) Thanks

  Read the article

• My CPU hits 100°C... Help me!

  - by JamesT

  The safe limit for processors is typically 50°C or so, but I have found that my CPU likes to do up to 100°C. I have got these readings from SpeedFan 4.42. I have a Intel Quad Core unclocked. I am using the standard intel fan with heatsink that came with the prossesor My case is a Cooler Master and I have two fans installed on the case. I took the side off to see if that helped. It lowered the temp be 3C. I don't really want to blow the processor and I don't know how to cool it down.

  Read the article

• Is ceph usable with only 100Mbps bandwidth between nodes?

  - by vaab

  I haven't great hardware, but my requirements are low, I would like to start using ceph so as to abstract filesystem location and allow potential easy scaling to bigger hardware in an hypothetical future. My actual hardware meets ceph hardware requirements except the ethernet bandwidth part between the hosts. Mine is 100 Mbit/s which is much lower than the 1Gbps expected in ceph, even from the minimal requirement. Will I be able to use ceph in a very small smili-prod environnement (with limited number of clients) ? FYI: My hardware is 2 or maybe 3 hosts having each 4 core Intel, 24Go RAM, 2x2To disks but 100Mpbs between them.

  Read the article

• "Windows Groups" missing from NAP Conditions

  - by Tim

  I am trying to configure a NAP policy for a 2008 R2 server running AD services. I have done this before and there is a condition for "Windows Groups". It is missing from the Conditions list, this time, though. I have registered NAP in AD I have restarted the NAP service I have rebooted I have removed the server as a NAP/IAS server in AD and re-registered I have removed the role and added it again I can't seem to find this in my googlings. Help is appreciated. Thanks.

  Read the article

• Random Connections to MySQL refused (Error 111)

  - by joatis

  A Perl/CGI webapp that has been running fine for almost a year has started to randomly been unable to connect to a remotely hosted MySQL. The Error thrown is : Can't connect to MySQL server on 'xx.x.xxx.xx' (111) Reloading the page often solves the problem The client is using Perl, DBI and SSL to connect to MySQL using the same configuration file each time. MySQL 5.0 Server Running RH EL5 Quad-Core AMD Opteron(tm) Processor 2374 HE, 8 cores Real Memory: 15.73 GB total, 11.81 GB used allows networking in my.cnf max-connections are not being met load is low. The servers firewall is open to the client's subnet. The mysql user has permissions from the client's subnet. I have my host looking into the problem but so far we're all stumped as to way the occasional connection is (increasingly getting refused) Any advice what to check that would cause the random refusal of connections?

  Read the article

• PuTTY: how to properly emulate -t option

  - by John Sonderson

  On Linux the ssh command has a -t option whose man page reads: Force pseudo-tty allocation. This can be used to execute arbitrary screen-based programs on a remote machine, which can be very useful, e.g. when implementing menu services. Multiple -t options force tty allocate, even if ssh has no local tty. I would like to use this same option with PuTTY on Windows. In particular, I can see that PuTTY has a bunch of options under: Category - Connection - SSH - TTY and suspect it might be possible to achieve the same behavior via some of the (NUMEROUS!) settings found on this screen. Anyone know how to configure the following command: ssh -t USER,[email protected] create Thanks!

  Read the article

• Tomcat Failed to start

  - by user71538

  I have installed Tomcat on windows XP through the Tomcat installer. I have installed JDK 1.6. But when I start Tomacat from services.msi on XP, I get the following error: java.lang.ClassNotFoundException: org.apache.catalina.core.AprLifecycleListener at java.net.URLClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(Unknown Source) at sun.misc.Launcher$ExtClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at org.apache.commons.digester.ObjectCreateRule.begin(ObjectCreateRule.java:204) at org.apache.commons.digester.Rule.begin(Rule.java:152) at org.apache.commons.digester.Digester.startElement(Digester.java:1286) at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement(Unknown Source) at com.sun.org.apache.xerces.internal.parsers.AbstractXMLDocumentParser.emptyElement(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDriver.next(Unknown Source) at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)

  Read the article

• How do I deploy Java code on an EC2 instance?

  - by Marianna

  I just started with Amazon web services, and I have an EC2 instance. I downloaded the JAVA SDK and the Eclipse toolbox. I am able to run a sample program locally on my PC and connect to the Amazon databases, etc. My question is, what do I need to do to get this working on my EC2 instance? This may not even be specific to AWS. On Eclipse, I can just "Run as Application" and run any code. On the server side, what do I need to do? Should I ftp over my .java files? Should I export it to a jar and upload that? Do I need to install anything special to actually run it?

  Read the article

• What is the best CPU I could get for my old setup?

  - by cmbrnt

  On my current not-so-good desktop computer, I'm currently running an Intel Core 2 Duo E6550-CPU, and I'm thinking of buying a newer one now that these must be cheap on E-bay and the like. Being a software guy, I'd be grateful for any help in identifying what CPUs that would fit my motherboard so I don't buy a processor which won't work with my computer. It might not be worth it however, since the SATA2-drive is currently what's bottlenecking my system, but I'm still curious about what could be done except for buying an SSD-drive. I'm providing screenshots of CPU-Z running, to help with the identification. My CPU- and motherboard info: http://i.imgur.com/YdO8x.png

  Read the article

• Need hosting (e-mail, http) for external domains

  - by disappointed

  This may not be the right place, but since it is a more technical aspect of the hosting world, I am taking the liberty to ask: I'm currently running a virtual server with nginx and postfix for web and e-mail, but I can't handle the administration and, due to frequent problems with e-mail services, I need to resolve this with a almost-standard hosting package (anything should work, even 5 MB static files would be OK). The exception being that I would like to use several domains, hosted with different registrars, for web and e-mail. Currently, this is a very simple configuration in my setup. All hosters I have looked at seem to think this a costly business (more than domain registration costs), but of course the recommend to transfer domains to them (they want the $$). Does anyone know of a hosting company that allows its customers to freely manage domains registered somewhere else?

  Read the article

• Provide credentials to process in a safe manner

  - by Erik Aigner

  On system startup I need to launch a process which requires credentials for other services (database etc.) to interact. I obviously don't want to store those on disk for security reasons. I'm trying to think of a way to provide those credentials to the process on launch - and on launch only. After that they should be only available to the process. Is this possible somehow? The bottom line is to make it as hard as possible for an intruder to get to those credentials.

  Read the article

• Boot Camp from USB DVD drive

  - by user81951

  I can't seem to be able to install Windows 7 64-bit on a 2008 MacBook (64-bit dual core) from an external USB DVD drive. I've done the following: Performed a clean install of Mac OS X Snow Leopard Installed all system updates Run Boot Camp Assistant - when the system restarts I get an error stating "no bootable disc" Used rEFIt, but I still get the same error Made a bootable USB drive from an ISO of the Windows 7 installation disc, but I still get the same error Tried using Windows 7 32-bit, Windows 7 64-bit and Windows XP, but I still get the same error How I can resolve this?

  Read the article

• Is it possible to create a full "encrypted worried about privacy" VPS, but still being externally us

  - by Somebody still uses you MS-DOS

  I've been reading a lot of things about privacy, "being in control of your data" and everything, and now a project called diaspora* is trying to be an OSS Facebook alternative. Fact is: you still have to use a server. Even if you use a VPS somewhere, they still have access do your data, so diaspora* isn't that protective shell people are looking for absolute power over your data unless you create a server on your basement. My question is: is it possible to create a really encrypted usable server using a VPS? From database to source files? If not, what it can be "obfuscated" or encrypted? (And just a mention, not really my question, do you think is diaspora* really possible to be made?) (I know if you really want privacy you shouldn't be even using these services and being social, but I'm asking if it's possible to at least avoid companies using your data)

  Read the article

• How long does it take in practice to warm up large in-memory databases?

  - by Sim

  Companies such as Peak Hosting are offering 64 core machines with 512Gb RAM for $2K/month. This is a very interesting choice for in-memory databases such as Memcached/Redis as well as databases whose performance degrades rapidly when the data & indexes don't fit in RAM, such as MongoDB. My main concern with monster machines such as these is the time it takes to warm up an in-memory database. In my experience, theoretical metrics, e.g., that SATA can load 100Mb/sec, fall short of what happens in practice. Even at that rate, 100Mb/sec means that loading up 512Gb RAM machine from SATA disks can take over 1 1/2 hours (!). I am looking for real-world reports of warm-up times for machines with very large memory. Please, share details of the software on the machine, data size, storage configuration, e.g., SATA or SSD, network, hosting/cloud provider, if relevant, etc.

  Read the article

< Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >