Search Results

Search found 20852 results on 835 pages for 'intellij idea'.

Page 594/835 | < Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >

• PC won't PXE boot to WDS/MDT with Dell Optiplex 755

  - by Moman10

  I am trying to set up a basic MDT solution. I have set one up in the past at a previous job and it worked flawlessly, however here I'm running into a problem and am having no luck getting around it. I've installed Windows Server 2012 and MDT 2013, along with adding on the WDS role. I haven't configured much outside of the defaults for WDS, basically just set PXE response to respond to all clients (and unchecked admin approval). This machine does not run a DHCP server. I looked on the DHCP scope of our DHCP server, it shows options 66/67 checked and the server name of the WDS server is in there as well. I didn't add this but I assume it was put on during the install process (I believe I had to manually make some adjustments at my old job for this). The PC I have is a Dell Optiplex 755. I have enabled the onbard NIC w/PXE boot option in BIOS and attempted to boot. I get a "TFTP...." error but nothing offering out a DHCP address like I'm used to. In my previous job it pretty much worked right out of the box. I've verified that PortFast is enabled on the port and I've tried a couple different PCs (but both are the same model, only model I have to work with). No matter what, I get the same error. The subnet the PC is in is a different subnet than where the WDS server is sitting, but there are IP helper statements on the switch and the PCs can get regular DHCP addresses just fine from the DHCP server, just doesn't seem to get offered out a PXE boot option. I don't know if the problem is a configuration with the server or the PC itself...but after a few days of Googling I'm running out of ideas. Does anyone have a good idea of something it may be?

  Read the article

• 9000+ different subdomains 301 to main domain, .htacess apache

  - by Karim

  I bought a domain that had various subdomains such as Kim.domain.com/whatever john.domain.com/whatever1 Lizo.domain.com/whatever2 Simon.domain.com/whatever1 And this was in the thousands, and also had links to these pages I'd like to do a 301 redirect for all these urls into http://domain.com Any idea how this could be done? This is for a apache web server and needs to be done via .htaccess I have implemented the solution from reading the answer below. RewriteEngine On RewriteCond %{HTTP_HOST} !^www. domain.com$ RewriteCond %{HTTP_HOST} !^$ RewriteRule ^/(.*)$ http:/ / www. domain.com/$1 [L,R=301] However I have a slight problem, I would like to redirect all subdomains + subfolders to http://www. domain.com/ With the exception of http: //domain. com/subfolder/, in which case I would like to redirect to http: // www.domain. com/subfolder/ [i.e. exception for no subdomain] I'm guessing I need to add an exception, what can I do to implement this. Note: example URLs above have had spaces added to them to prevent spam blocks for blocking the post.

  Read the article

• Courier IMAP always disconnects since update

  - by Raffael Luthiger

  Since one of our customers updated their server courier does not handle IMAP connections properly any more. POP3 works without any problems. When I try to test IMAP with telnet then it is always like this: $ telnet domain.com 143 Trying 188.40.46.214... Connected to domain.com. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS] Courier-IMAP ready. Copyright 1998-2011 Double Precision, Inc. See COPYING for distribution information. 01 LOGIN [email protected] test Connection closed by foreign host. I enabled debugging in the authdaemond but the output does not really help much: Apr 12 23:10:04 servername authdaemond: received auth request, service=imap, authtype=login Apr 12 23:10:04 servername authdaemond: authmysql: trying this module Apr 12 23:10:04 servername authdaemond: SQL query: SELECT login, password, "", uid, gid, homedir, maildir, quota, "", concat('disableimap=',disableimap,',disablepop3=',disablepop3) FROM mail_user WHERE login = '[email protected]' Apr 12 23:10:04 servername authdaemond: password matches successfully Apr 12 23:10:04 servername authdaemond: authmysql: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/vmail, [email protected], fullname=<null>, maildir=/var/vmail/domain.com/test, quota=0, options=disableimap=n,disablepop3=n Apr 12 23:10:04 servername authdaemond: Authenticated: sysusername=<null>, sysuserid=5000, sysgroupid=5000, homedir=/var/vmail, [email protected], fullname=<null>, maildir=/var/vmail/domain.com/test, quota=0, options=disableimap=n,disablepop3=n Right after the "Authenticated" line the output stops. There is no other message. And in no other log file I've checked I could find any other related message. The system was updated from Ubuntu 10.10 to 12.04. How could I get more information? Or does anybody have an idea what could go wrong here?

  Read the article

• Display maintenance site to requesters based on their IP address

  - by user64294

  Hi all. I would like to set a special configuration in our apache web server. I would like to display sites to the users according to their IP addresses. We plan to upgrade our web sites. During the upgrade we'll put a maintenance site: so all the users which will connect to our web sites will get this site. There are 200 websites affected by the upgrade, so I don't want to change apache settings for each one. In order to test the upgrade i need to set apache to let only my IP address to access to asked site. If my IP address is a.b.c.d and if i ask for test.com i want to see it. but all other users, having a different IP address, should get the maintenane site even if they look for test.com. Our webserver is hosted out of the office (ovh.com france). The testers are the developers at our office and me. We can take some sites and enable them for test in which we implement IP restrictions in each website: the idea is on these websites, if the visitor's IP address is different from our office IP address we redirect this visitor to our maintenance website else we display the website. Is there a way to do this? Thank you.

  Read the article

• postfix and iRedMail- Relaying Denied

  - by Lock

  I am trying to setup iRedMail and am way over my head here. I have installed it, and can send emails internally, but not externally. When I send an email from outside, I get the following return email: The error that the other server returned was: 550 550 5.7.1 <[email protected]>... Relaying denied (state 13). Now I have no idea where to start looking! Any ideas? I have really only just installed iRedMail so I am unsure what else I need to do to get it working. I've pointed my MX records to that server, so that shouldnt be the problem. Also- if i stop postfix (so nothing is listening on port 25) and send a test email, I get the same reply back. Why would I get the same reply back even if postfix is stopped? I have run tcpdump over 25 and can see the packets coming in/out, so its definitely a configuration issue! I suppose my question is not really "what is my problem", but more "What configuration needs to be completed on postfix and iRedMail?"

  Read the article

• picking a linux compatable motherboard

  - by Chris

  Last time I bought a new computer (I build them myself) I got a motherboard that had really poor linux support for a long time. Specifically the audio. I had to wait months before the kernel supported the on board audio chipset. That is exactly the situation I'm trying to avoid this time around. I have some specific questions about "server motherboards" actually. I looked at a few models of server motherboards by intel, and some random models on newegg. I wasn't able to see much of a difference from regular desktop motherboard other than most had two sockets, and support for much more ram. These boards seem more popular with Linux users. Why? AMD and Intel both have server CPUs as well. Some question, what's the difference? To make this question more concrete, I was looking at this this motherboard. The main questions about it that I can't answer are: Can I get a motherboard without on board raid and audio? I wanted to get a hardware raid controller and a PCI audio card. I thought a server motherboard would be cheaper and not have these "extras", since who wants an audio card on a server? Where can I found out about Linux support for the components on this board? "Intel ICH10R", "Realtek ALC889", "Marvell 88E8056" I'm buying this computer to work as a Linux desktop for a lot of compiling, coding and audio/video work, but I don't want to rule out the possibility of installing windows and playing some games at one point. (even if the last game I got has been sitting in its box unopened for almost a year). Is it a good idea to buy a "server motherboard" and play games on it, or are desktop boards better value for this? The ultimate solution for me would be a motherboard that had GPL divers for onboard LAN, a single CPU socket, lots of PCI express and PCI. USB 3.0, and no fancy hard disk controllers since I'll be getting a separate one.

  Read the article

• Unexplained cache RAM drops on Linux machine

  - by FunkyChicken

  I run a CentOS 5.7 64 machine with 24gb ram and running kernel 2.6.18-274.12.1.el5. This machine runs only Nginx, php-fpm and Xcache as extra applications. Since about 3 weeks my memory behavior on this machine has changed and I cannot explain why. There are no crons running which flush anything like this. There are also no large numbers of files being deleted/changed during these drops. The 'cached' memory gets dropped about every few hours, but it's never a set gap between flushes, this indicates to me that some bottleneck gets reached instead. It also always seems to be when total memory usages gets to about 18GB, but again, not always exactly 18GB. This is a graph of my memory usage: As you can see in the graph the 'buffers' always stay more or less the same, it is mainly the 'cache' that gets dropped. Running vmstat -m I have outputted the memory usage just before and just after a memory drop. The output is here: http://pastebin.com/diff.php?i=hJqZqztm 'old version' being before, 'new version' being after a drop. About 3 weeks ago my server crashed during a heavy DDOS attack, after I rebooted the machine this odd behavior started. I have checked a bunch of logs, restarted the machine again, and cannot find any indication what changed. During these 'cache' memory drops, my iNode usage drops at the same time. Does anyone have any idea what might be causing this behavior? Clearly my RAM isn't full, so I am curious why this could be happening.

  Read the article

• Share Exchange Calendar Outside Organization

  - by CalCurious

  I'm trying to figure out the best way to meet a user's (Corp-A-User) request to share their calendar with someone at another company (Corp-B-User). We're running Microsoft SBS 2008 with Exchange 2007 and SharePoint. The remote user is running Exchange, version unknown. Corp-A-User wants to give the Corp-B-User the ability to create appointments on Corp-A-User's calendar. This will naturally require sharing of Free/Busy information. Corp-A-User naturally lacks the vision to seen ANY problem with giving Corp-B-User full access to their calendar. But, I see the problems with that and would prefer that Corp-B-User have only the ability to see Free/Busy and create appointments. Most of the external publishing options that I have thought of, such as WebDav, allow displaying a user's calendar, but there are problems with security and the ability to create appointments. Right now, I'm thinking the cleanest solution would be to use a Google calendar along with Google Calendar Sync for the two user's Outlook clients. But, I'm not sure if there isn't a better way and I hate teh idea of pushing a corporate calendar up to Google. Not to mention the issues likely to pop up from the multiple sync paths. Does any one have a good solution for this scenario that would be willing to share what they use?

  Read the article

• avconv gets killed if mkv has subtitles

  - by Lukas Knuth

  What I'm trying to do is to take a movie (in an Matroska container), convert all audio tracks to AC3 and don't touch anything else. I'm using this line: avconv -i infile.mkv -map 0 -vcodec copy -scodec copy -acodec ac3 -ab 256k outfile.mkv This works fine, except when there are subtitles embedded. Then, after some time processing with no progress, avconv just "dies" (output shortened, these seem to be the interesting parts): [matroska,webm @ 0xf867a0] max_analyze_duration reached [matroska,webm @ 0xf867a0] Estimating duration from bitrate, this may be inaccurate ... Incompatible sample format 's16' for codec 'ac3', auto-selecting format 'flt' ... Stream #0.0(eng): Video: H264 / 0x34363248, yuv420p, 1280x536 [PAR 1:1 DAR 160:67], q=2-31, 1k tbn, 1k tbc (default) Stream #0.1(ger): Audio: ac3, 48000 Hz, 5.1, flt, 256 kb/s (default) Stream #0.2(eng): Audio: ac3, 48000 Hz, 5.1, flt, 256 kb/s Stream #0.3(ger): Subtitle: dvdsub (default) (forced) Metadata: title : forced Stream #0.4(ger): Subtitle: dvdsub Metadata: title : complete Stream mapping: Stream #0:0 -> #0:0 (copy) Stream #0:1 -> #0:1 (dca -> ac3) Stream #0:2 -> #0:2 (dca -> ac3) Stream #0:3 -> #0:3 (copy) Stream #0:4 -> #0:4 (copy) Input stream #0:2 frame changed from rate:48000 fmt:s16 ch:6 to rate:48000 fmt:flt ch:6 Input stream #0:1 frame changed from rate:48000 fmt:s16 ch:6 to rate:48000 fmt:flt ch:6 frame= 2606 fps=1303 q=-1.0 size= 3kB time=107.36 bitrate= 0.2kbits/s ... frame=96141 fps=813 q=-1.0 size= 2195806kB time=2807.04 bitrate=6408.2kbits/s frame=96251 fps=810 q=-1.0 size= 2195806kB time=2807.04 bitrate=6408.2kbits/s ... frame=97015 fps=397 q=-1.0 size= 2195806kB time=2807.04 bitrate=6408.2kbits/s Getötet ["Killed", in English] I have no idea why this happens, as there is no error-output. I'd like to just copy the subtitles over, not touch them at all. If that won't work, they can be completely dropped.

  Read the article

• Install Windows 7 from ISO image

  - by Albert

  Hi, I have an ISO file of the Windows 7 DVD and I want to install it on my PC which currently only runs Linux. I don't have any DVD drive. I have some unpartitioned space on one disk where I want to install it in. When I am doing this for Linux, I usually just create the partitions from the running system, format them, mount them, copy files over, chroot into it, setup the stuff and I can boot into it (or I use some of the uncountable available scripts which do exactly that automatically). However, I have no idea how to do the same thing with Windows. So far, I tried with VMware, i.e. I gave it direct full access to the disk where I want to install it in, installed it there, then tried to boot natively into it. The Windows logo showed up but after maybe 3 seconds or so, it crashes. Safe mode also crashes. I already expected that this probably would exactly behave the way it does right now because I have heard that Windows is quite sensible about hardware changes (i.e. the VMware hardware and the real hardware). However, how can I fix it now that it works? Or I could also just delete it again and try just over. But how exactly? I also searched for ways to boot directly into an ISO file. There seem to be ways to do that via GRUB (and maybe some additional boot loader), although quite complicated. I already tried one method (GRUB: map ...iso (hdX)), however, that didn't worked. Also, even if it does work, I will get into trouble when I boot into the newly installed Windows and it requests for the DVD (because it does that at the first boot into the new system). Seems all quite complicated. Isn't there some easy way like I would do it for Linux? Or what would be the easiest way to get what I want?

  Read the article

• Xinerama creates a panning viewport

  - by iblue

  EDIT: I've created a bug report: https://bugs.freedesktop.org/show_bug.cgi?id=48458 My Setup I have 4 monitors, 1920x1080, which are in portrait mode (rotated left). They are connected to two radeon graphic cards. As usual, a picture says more than a thousand words. The problem Everything works fine, when Xinerama is disabled. But when I enable Xinerama, things get weird. When I move the mouse of the screen and return, the screen contents begin to move with the mouse, only on this monitor. It seems like the virtual display size does not match the real screen size, which activates a panning viewport. Any idea how to stop this? The video I created a video to demonstrate the issue: http://www.youtube.com/watch?v=zq_XHji1P24 xorg.conf This is my xorg.conf: Section "ServerLayout" ##################[ Evilness begins here ]############# Option "Xinerama" "on" # <--- Makes it go b0rked! ##################[ End of all evil ]############# Identifier "BOFH Console of Doom" Screen 0 "Screen-0" 0 0 Screen 1 "Screen-1" RightOf "Screen-0" Screen 2 "Screen-2" RightOf "Screen-1" Screen 3 "Screen-3" RightOf "Screen-2" EndSection Section "ServerFlags" Option "RandR" "false" EndSection Section "Module" Load "dbe" Load "dri" Load "extmod" Load "dri2" Load "record" Load "glx" EndSection Section "Monitor" Identifier "Monitor-0" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-1" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-2" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-3" Option "Rotate" "left" EndSection Section "Device" Identifier "Radeon-0-0" Driver "radeon" BusID "PCI:9:0:0" Option "ZaphodHeads" "DVI-0" Screen 0 EndSection Section "Device" Identifier "Radeon-0-1" Driver "radeon" BusID "PCI:9:0:0" Option "ZaphodHeads" "DVI-1" Screen 1 EndSection Section "Device" Identifier "Radeon-1-0" Driver "radeon" BusID "PCI:4:0:0" Option "ZaphodHeads" "DVI-2" Screen 0 EndSection Section "Device" Identifier "Radeon-1-1" Driver "radeon" BusID "PCI:4:0:0" Option "ZaphodHeads" "DVI-3" Screen 1 EndSection Section "Screen" Identifier "Screen-0" Device "Radeon-0-0" Monitor "Monitor-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-1" Device "Radeon-0-1" Monitor "Monitor-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-2" Device "Radeon-1-0" Monitor "Monitor-2" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-3" Device "Radeon-1-1" Monitor "Monitor-3" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Windows Firewall Software to Filter Transit Traffic

  - by soonts

  I need to test my networking code for Nintendo Wii under the conditions when some specific Internet server is not available. Wii is connected to my PC with crossover ethernet cable. PC has 2 NICs. PC is connected to hardware router with ethernet cable. The hardware router serves as NAT and has an internet connected to its uplink. I set the Wii to be in the same lan as PC by using Windows XP Network bridge. I can observe the WII network traffic using e.g. Wireshark sniffer. Is there a software firewall that can selectively filter out transit traffic? (e.g. block outgoing TCP connections to 123.45.67.89 to port 443) I tried Outpost Pro 2009 and Comodo. Outpost firewall blocks all transit traffic with it's implicit "block transit packet" rule. If the transit traffic is explicitly allowed by creating the system-wide low level rule, then it's allowed completely and no other filter can selectively block it. Comodo firewall only process rules when the packet has localhost's IP as either source or destination, allowing the rest of the traffic. Any ideas? Thanks in advance! P.S. Platform is Windows XP 32 bit, no other OSes is allowed, Windows ICS (Internet Connection Sharing) doesnt work since the Wii is unable to connect, becides I don't like the idea of adding one more level of NAT.

  Read the article

• No clue for high load average on top

  - by Oz.

  We have several machines on Amazon (ec2) of the type c1.xlarge with 16 cpus, running the Amazon AMI. Details on the machine: 7 GB of memory 20 EC2 Compute Units (8 virtual cores with 2.5 EC2 Compute Units each) 1690 GB of instance storage 64-bit platform I/O Performance: High API name: c1.xlarge One out of the several machines is showing a high load average, since we have run the last yum upgrade a couple of weeks a go. We did not yet update the other machines, and everything looks normal on them. The strange thing is that the top command not showing any hint for the cause of the load. CPUs are 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st(see below). Mem is about 1.5GB free. Any idea what could it be, or where else can we check? Many thanks for the help. # # top # top - 07:57:42 up 4:18, 1 user, load average: 1.36, 1.45, 1.47 Tasks: 131 total, 1 running, 130 sleeping, 0 stopped, 0 zombie Cpu(s): 4.8%us, 1.1%sy, 0.0%ni, 94.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 7120092k total, 5644920k used, 1475172k free, 532888k buffers Swap: 0k total, 0k used, 0k free, 3463936k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1557 mysql 20 0 1829m 374m 6448 S 14.3 5.4 11:15.09 mysqld 6655 apache 20 0 416m 49m 3744 S 9.3 0.7 0:04.85 httpd 27683 apache 20 0 421m 54m 3708 S 9.0 0.8 0:00.99 httpd 6682 apache 20 0 424m 57m 3788 S 8.3 0.8 0:03.81 httpd 16816 apache 20 0 419m 51m 3760 S 4.3 0.7 0:04.09 httpd 22182 apache 20 0 417m 50m 3756 S 1.7 0.7 0:06.34 httpd 219 root 20 0 0 0 0 S 0.3 0.0 0:00.34 kworker/7:1 699 root 20 0 0 0 0 S 0.3 0.0 0:00.40 kworker/3:1 1 root 20 0 19376 1508 1212 S 0.0 0.0 0:00.29 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.71 ksoftirqd/0

  Read the article

• Apache22 on FreeBSD - Starts, does not respond to requests

  - by NuclearDog

  Hey folks! I'm running Apache 2.2.17 with the peruser MPM on FreeBSD 8.2-RC1 on Amazon's EC2 (so it's XEN). It was installed from ports. My problem is that, although Apache is running, listening for, and accepting connections, it doesn't actually respond to any or show them in the log at all. If I telnet to the port it's listening on and type out an HTTP request: GET / HTTP/1.1 Host: asdfasdf And hit enter a couple of times, it just sits there... Nothing. No response requesting with a browser either. There doesn't appear to be anything helpful in the error log: [Sun Jan 09 16:56:24 2011] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Sun Jan 09 16:56:25 2011] [notice] Digest: generating secret for digest authentication ... [Sun Jan 09 16:56:25 2011] [notice] Digest: done [Sun Jan 09 16:56:25 2011] [notice] Apache/2.2.17 (FreeBSD) mod_ssl/2.2.17 The access log stays empty: root:/var/log# wc httpd-access.log 0 0 0 httpd-access.log root:/var/log# I've tried with accf_http and accf_data both enabled and disabled, and with both the stock configuration and my customized config. I also tried uninstalling apache22-peruser-mpm and just installing straight apache22... Still no luck. I tried removing all of the LoadModule lines from httpd.conf and just re-enabled the ones that were necessary to parse the config. Ended up with only the following loaded: root:/usr/local/etc/apache22# /usr/local/sbin/apachectl -M Loaded Modules: core_module (static) mpm_peruser_module (static) http_module (static) so_module (static) authz_host_module (shared) log_config_module (shared) alias_module (shared) Syntax OK root:/usr/local/etc/apache22# Same results. Apache is definitely what's listening on port 80: root:/usr/local/etc/apache22# sockstat -4 | grep httpd root httpd 43789 3 tcp4 6 *:80 *:* root httpd 43789 4 tcp4 *:* *:* root:/usr/local/etc/apache22# And I know it's not a firewall issue as there is nothing running locally, and connecting from the local box to 127.0.0.1:80 results in the same issue. Does anyone have any idea what's going on? Why it would be doing this? I've exhausted all of my debugging expertise. :/ Thanks for any suggestions!

  Read the article

• Finding custom printer-specific options on *nix

  - by enbuyukfener

  Hey all, I have a printer set up using CUPS (FujiXerox Document Center 1100), it is named DC1100. There are capabilities of the printer that are not shows as options of the printer as listed by: lpoptions -l -d DC1100 The output is below: PrintoutMode/Printout Mode: Draft *Normal High Photo InputSlot/Media Source: Upper Lower MultiPurpose LargeCapacity Manual *Standard PageSize/Page Size: *Letter A4 C5 C6 COM10 DL Executive Legal Monarch Statement PageRegion/PageRegion: Letter A4 C5 C6 COM10 DL Executive Legal Monarch Statement STP_Brightness/Brightness: 0.00 0.02 0.04 [snip] 2.00 STP_Contrast/Contrast: 0.00 0.05 0.10 0.15 [snip] 4.00 STP_ColorCorrection/Color Correction: Accurate Bright Density [snip] Uncorrected STP_DitherAlgorithm/Dither Algorithm: Adaptive EvenTone Fast [snip] VeryFast STP_EnableDensity/Density Enable: *Disabled Enabled STP_Density/Density Value: 0.1 0.2 0.3 0.4 [snip] 8.0 STP_EnableGamma/Composite Gamma Enable: *Disabled Enabled STP_Gamma/Composite Gamma Value: 0.10 0.15 0.20 0.25 [snip] 4.00 STP_LinearContrast/Linear Contrast Adjustment: *False True STP_Duplex/Double-Sided Printing: DuplexNoTumble DuplexTumble *None Resolution/Rendering Resolution: *FromPrintoutMode 150x150dpi 300x300dpi 600x600dpi OutputType/Output Type: *FromPrintoutMode BlackAndWhite Grayscale STP_ImageType/Image Type: *FromPrintoutMode Photo Graphics LineArt None Text TextGraphics STP_Resolution/Resolution: *FromPrintoutMode 150dpi 300dpi 600dpi I am particularly looking for options for: "secure print" (possibly by setting a mode and setting a username) stapling hole punching Perhaps I need a vendor specific driver/PPD file? If so, any pointers as I have no idea where to look for one. I haven't been able to find one on the official site or on sites such as http://www.openprinting.org

  Read the article

• Determine wifi capabilities of Windows box (with WSUS install rules)

  - by Hagen von Eitzen

  I need to determine if a computer is in fact a laptop with wifi capabilities (with emphasis on wifi rather than laptop). More precisely, I want to distribute a piece of software I wrote via WSUS and Local Update Publisher to those clients. To this end, I want to create appropriate "Package installable rules", that is simple rule used bay the Windows Update Service on the client to decide beforehand whether or not an update/installation package is applicable. Typically, such "installabel rules" are logical combinations of rules of type "File exists", "Registry Key exists", "WMI Query", "MSI Product Installed", so I'd prefer one of those methods. The method I hope someone here can help me find should work with Win 7/Vista, preferably also with XP. My guess is that WMI query is the way to go, but I have little experience in that. I have found that one can e.g. query for EnclosureType and that might detect a laptop. However, I would be much happier if an actually available wifi interface would be detected. Does anyone have an idea how to approach this? If there is anything you need me to clarify, don't hesitate to comment.

  Read the article

• If I partition a drive connected via eSata will it show different partitions when connected via USB?

  - by jeffreypriebe

  I have an odd problem with an external drive. I'm formatting it connected to my laptop prior to connecting it to my router. The HDD enclosure has both an eSata and USB connections. Generally, I connect it via eSata to my laptop. I created my partitions and connected it to the router, but I see partition information that is different than what I created. After chasing leads concerning large HDD size, I mindlessly connected the HDD to my laptop with USB. Lo! I see the same partitions as the router. Attached are screenshots using the same program and the HDD in question. The only difference is the connection. For the first, I connected via eSata and hit "refresh" on the partition program. Then, turned off the HDD, disconnected the eSata cable, and connected via USB. Power and refresh. eSata: reports a total HDD size of 2328 GB, with four partitions (the third being 1.96TB) USB: reports a total HDD size of 280 GB, with three partitions (the third being 279 GB) Any idea why this is happening? It looks like it clearly is an issue of the 4K sector size and not playing nice with the USB enclosure. I tried it eSata and USB in Windows and Linux and it appears consistently that eSata is reporting correctly, USB incorrectly.

  Read the article

• Membership in two domains

  - by imagodei

  Hello! I would your suggestions for an effective solution for a person, who needs to access resources in two Windows domains and wants to use one computer. It's about our CEO, who has accepted a second position in another company. Accessing files and folders isn't big problem. The greatest challenge I see is that he wants to conveniently access Exchange accounts in both companies; he would like to send and receive mail in single Outlook if possible (two profiles?) There is also a challenge with calendars: he would like to have one calendar for all activities from both Exchange accounts. Creating a POP3 account for accessing second Exchange server is a last resort, because obviously there is a problem with scheduling meetings and other calendar related tasks. Forwarding and receiving all mail/tasks on primary Exchange server is inconvenient because simple replying to original sender is disabled; and also when manually changing the recepient, he will receive mail from the wrong address. We were considering Virtualisation, that is setting up an instance of virtual machine inside existing installation and then joining this virtual computer to a second domain. Then installing another MS Outlook. This would of course mean two different Outlook accounts, two different calendars, but would at least enable our CEO to access all information from a single laptop. Does anyone have any other idea? I know setting up two domains on a single computer is a no-go (without much hacking at least), but effective workarounds are appreciate. The thing I am looking here is high usage/efficiency/productivity, but also as elegant solution from the administration point of view. Thank you very much (if you managed to read this through, this is a good sign ^_^ )

  Read the article

• Cluster Core Resource state of Exchange 2010 DAG

  - by Christoph

  I have two Exchange 2010 servers in a DAG and a witness server to implement mailbox resiliency. The two Exchange servers are in two subnets and the Windows failover cluster therefore has two IP address resources. I now that Exchange uses "core functionality" of Windows Server failover clustering, but it does not use all features. My setup also seems to work, but if I run the validation in the Windows Failover Cluster Manager, it complains about one of the IP address resources being offline. However, I cannot bring this resource online, because the server complains that "the specified cluster node is not the owner of the resource, or the node is not a possible owner of the resource". If I "Simulate failure of this resource", it becomes offline and the other IP becomes online. I have the vague idea that Exchange might use the state of the IP resource to identify the Primary Active Manager, but I am not sure. As it is obviously important that failover really works, I would like to be sure. Therefore, my question is: Is it normal that only one IP address resource in a Exchange 2010 DAG failover cluster is active at a time? If not, how do I bring both resources online at the same time given the error described above?

  Read the article

• IPSec tunnelling with ISA Server 2000...

  - by Izhido

  Believe it or not, our corporate network still uses ISA Server 2000 (in a Windows Server 2003 machine) to enable / control Internet access to / from it. I was asked recently to configure that ISA Server to create a site-to-site VPN for a new branch in a office about 25 km. away from it. The idea is basically to enable not only computers, but also Palm devices (WiFi-enabled, of course), to be able to see other computers in both sites. I was also told that a simple VPN-enabled wireless AP/router (in this case, a Cisco WRV210 unit) should be enough to establish communications with the main office. To be fair, the router looks easy to configure; it was confusing at first, but further understanding of how site-to-site VPNs work cleared all doubts about it. Now I need to make modifications to our ISA Server in order to recognize the newly installed & configured "remote" VPN site. Thing is, either my Googling skills are pathethically horrible, or there doesn't seem to be much (or any, at all) information about how to configure an ISA Server 2000 for this purpose. Lots of stuff on 2004, of course; also, I think I saw something for 2006. But nothing I could find about 2000. Reading about 2004, it seems that the only way I can do site-on-site with a Cisco router (read: a non-ISA-Server machine) is through something they call a "IPSec tunnel". Fair enough. However, I can't figure for the life of me how could I even start to find, leave alone configure, such a thing. Do you, people, happen to know how to do IPSec tunelling on a ISA Server 2000, so I can connect to a Cisco WRV210 VPN-enabled router, and build a site-to-site VPN for both networks? Or is this not possible at all? (Meaning I should change anything in this configuration to make it work...)

  Read the article

• Using OSX home directories from linux

  - by Steffen

  I'm running an OSX (Snow Leopard) Server with OpenDirectory, which is nothing else than a modified OpenLDAP with some Apple-specific schemas. However, I want to reuse this directory on some of my Linux (Debian Squeeze) boxes. It's no problem to authenticate against OSXs LDAP Server, this works fine already. What I struggle with is the way the home folders are specified in OSX. If I query the passwd config on one of my linux machines, the OSX imported entries are looking like this myaccount:x:1034:1026:Firstname Lastname:/Network/Servers/hostname.example.com/Volumes/MyShare/Users/myaccount:/bin/bash While those network home folders might be fine for OSX-Clients, I don't want those server based paths on my linux machines. I saw that there is an NFSHomeDirectory Attribute in the OSX User inspector, but if I change this the whole user home path gets changed. Since my users should be able to login on both systems, OSX and Linux, this is not what I want. Does anyone have an idea how I must configure OSX to make my linux machines use home folders like /net/myaccount and leave the configuration for OSX clients untouched?

  Read the article

• FastGate A20 Line And Himem.sys Issue With Updating BIOS

  - by Boris_yo

  I have been persistent with a thought to perform my first BIOS update ever through MS-DOS but have been postponing this task until today. Despite people telling me any bootable ISO will do it either through CD-ROM or RAMDRIVE, I am still having problems. First is the problem with CD-ROM driver trying to make it work with 4 driver files (cd1.SYS, cd2.SYS, cd3.SYS, cd4.SYS) as well as starting RAMDISK proved to be failure: CD-ROM XMS Allocation Error RAMDISK XMS Allocaton Error (X: and R: drives not working) This A20 line seemed to be the obstacle which then after a couple of searches pointed me to this article on Microsoft website. It seems that FastGate is the culprit which takes over A20 line and conflicts with himem.sys which should be handling it causing the driver to be unable to allocate memory resources. Albeit article suggests 2 workarounds which is disabling FastGate option or adding switch, I read that the former workaround could cause problems which involves later tinkering BIOS, disabling shadow copy etc. while the latter workaround can just hang system as stated in the link above. I assume it just hangs the boot process from image file though. Summing up the above, I am cautious and think it is risky to follow both workarounds because disabling FastGate or trying adding switch by trying available switches from 1-14 or 16, could crash the BIOS update process by itself. I could do this without the need for himem.sys with bootable USB thumbdrive by making it to be seen as USB-HDD, but some time ago I read that it is never a good idea to update BIOS from hard drive so even thought it is simulation, who knows... Maybe it will deactivate hard drive in the middle of the BIOS update process or even USB thumbdrive per se? One forum discussion was about updating BIOS and somebody suggested to not load himem.sys for some reason, but now that I think of it, what if BIOS update needs upper memory?

  Read the article

• 2 subnets off of 1 PC with 2 NICs

  - by Jeff

  I have a general setup I'd like to do with some IP cameras. This seems like it will work but I think I may be missing something. Our system consists of a video recorder PC connected to a switch which is connected to a number of IP cameras. I'd like to connect this system into an existing network but I want it on a different subnet. The main reason is that the cameras use a lot of bandwidth that I don't want slowing down the existing network. My idea was to install 2 NICs on the video recorder pc. 1 NIC connects to the existing network on 192.169.1.x for example, and the other NIC connect to the switch with the cameras. This NIC would be 192.168.100.x. Then we could remote to the video recorder PC with a GoToMyPC type thing for administration via the existing network. I've included a diagram of how I see this working but I'm a little fuzzy on the setup of the NICs (if this can work at all). My problem may be trying to deal with 2 subnets without a router but It really doesn't seem like it's necessary in this situation. BTW, gliffy is cool.

  Read the article

• Finding useful crash-information in Windows 8 Consumer Preview

  - by Lukas Knuth

  I'm currently diving into C# and wanted to play around with the new Metro-styled-applications introduced with Windows 8, so I updated my Windows 7 to Windows 8 Consumer Preview. The problem I'm facing right now is, that the system freezes after 3-5 minutes. It does not take any input from the keyboard or mouse and it does not recover (at least not in less then 10 minutes). Since I have a background in Linux, I'd like to find some information about the cause of the freeze, but I have no idea where to search. I checked the system-logs (under "System Control" - "Management") but they only record that the system was shut down unexpectedly (doe to the face that I held down the power-button to reboot the PC). There is no useful crash-information in there. I don't want to spend hours on randomly reinstalling drivers and doing things that "might help". Isn't there any place I can find some useful information about the freeze? Before you ask: I installed Windows 8 as an updated on my old Windows 7 installation (which worked fine by the way). My hardware fits the minimum requirements (specs can be found here, the MacMini 3,1 model with 2GHz processor). I have updated the graphics-card drivers to the newest Windows 8 drivers from nVidia.

  Read the article

• Connection refused in ssh tunnel to apache forward proxy setup

  - by arkascha

  I am trying to setup a private forward proxy in a small server. I mean to use it during a conference to tunnel my internet access through an ssh tunnel to the proxy server. So I created a virtual host inside apache-2.2 running the proxy, the proxy_http and the proxy_connect module. I use this configuration: <VirtualHost localhost:8080> ServerAdmin xxxxxxxxxxxxxxxxxxxx ServerName yyyyyyyyyyyyyyyyyyyy ErrorLog /var/log/apache2/proxy-error_log CustomLog /var/log/apache2/proxy-access_log combined <IfModule mod_proxy.c> ProxyRequests On <Proxy *> # deny access to all IP addresses except localhost Order deny,allow Deny from all Allow from 127.0.0.1 </Proxy> # The following is my preference. Your mileage may vary. ProxyVia Block ## allow SSL proxy AllowCONNECT 443 </IfModule> </VirtualHost> After restarting apache I create a tunnel from client to server: #> ssh -L8080:localhost:8080 <server address> and try to access the internet through that tunnel: #> links -http-proxy localhost:8080 http://www.linux.org I would expect to see the requested page. Instead a get a "connection refused" error. In the shell holding open the ssh tunnel I get this: channel 3: open failed: connect failed: Connection refused Anyone got an idea why this connection is refused ?

  Read the article

< Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >