Search Results

Search found 17579 results on 704 pages for 'mercurial build'.

Page 594/704 | < Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >

• Boost causes an invalid block while overloading new/delete operators

  - by user555746

  Hi, I have a problem which appears to a be an invalid memory block that happens during a Boost call to Boost:runtime:cla::parser::~parser. When that global delete is called on that object, C++ asserts on the memory block as an invalid: dbgdel.cpp(52): /* verify block type */ _ASSERTE(_BLOCK_TYPE_IS_VALID(pHead->nBlockUse)); An investigation I did revealed that the problem happened because of a global overloading of the new/delete operators. Those overloadings are placed in a separate DLL. I discovered that the problem happens only when that DLL is compiled in RELEASE while the main application is compiled in DEBUG. So I thought that the Release/Debug build flavors might have created a problem like this in Boost/CRT when overloading new/delete operators. So I then tried to explicitly call to _malloc_dbg and _free_dbg withing the overloading functions even in release mode, but it didn't solve the invalid heap block problem. Any idea what the root cause of the problem is? is that situation solvable? I should stress that the problem began only when I started to use Boost. Before that CRT never complained about any invalid memory block. So could it be an internal Boost bug? Thanks!

  Read the article

• 1k of Program Space, 64 bytes of RAM. Is assembly an absolute must?

  - by Earlz

  (If your lazy see bottom for TL;DR) Hello, I am planning to build a new (prototype) project dealing with physical computing. Basically, I have wires. These wires all need to have their voltage read at the same time. More than a few hundred microseconds difference between the readings of each wire will completely screw it up. The Arduino takes about 114 microseconds. So the most I could read is 2 or 3 wires before the latency would skew the accuracy of the readings. So my plan is to have an Arduino as the "master" of an array of ATTinys. The arduino is pretty cramped for space, but it's a massive playground compared to the tinys. An ATTiny13A has 1k of flash ROM(program space), 64 bytes of RAM, and 64 bytes of (not-durable and slow) EEPROM. (I'm choosing this for price as well as size) The ATTinys in my system will not do much. Basically, all they will do is wait for a signal from the Master, and then read the voltage of 1 or 2 wires and store it in RAM(or possibly EEPROM if it's that cramped). And then send it to the Master using only 1 wire for data.(no room for more than that!). So far then, all I should have to do is implement trivial voltage reading code (using built in ADC). But this communication bit I'm worried about. Do you think a communication protocol(using just 1 wire!) could even be implemented in such constraints? TL;DR: In less than 1k of program space and 64 bytes of RAM(and 64 bytes of EEPROM) do you think it is possible to implement a 1 wire communication protocol? Would I need to drop to assembly to make it fit? I know that currently my Arduino programs linking to the Wiring library are over 8k, so I'm a bit concerned.

  Read the article

• Why do System.IO.Log SequenceNumbers have variable length?

  - by Doug McClean

  I'm trying to use the System.IO.Log features to build a recoverable transaction system. I understand it to be implemented on top of the Common Log File System. The usual ARIES approach to write-ahead logging involves persisting log record sequence numbers in places other than the log (for example, in the header of the database page modified by the logged action). Interestingly, the documentation for CLFS says that such sequence numbers are always 64-bit integers. Confusingly, however, the .Net wrapper around those SequenceNumbers can be constructed from a byte[] but not from a UInt64. It's value can also be read as a byte[], but not as a UInt64. Inspecting the implementation of SequenceNumber.GetBytes() reveals that it can in fact return arrays of either 8 or 16 bytes. This raises a few questions: Why do the .Net sequence numbers differ in size from the CLFS sequence numbers? Why are the .Net sequence numbers variable in length? Why would you need 128 bits to represent such a sequence number? It seems like you would truncate the log well before using up a 64-bit address space (16 exbibytes, or around 10^19 bytes, more if you address longer words)? If log sequence numbers are going to be represented as 128 bit integers, why not provide a way to serialize/deserialize them as pairs of UInt64s instead of rather-pointlessly incurring heap allocations for short-lived new byte[]s every time you need to write/read one? Alternatively, why bother making SequenceNumber a value type at all? It seems an odd tradeoff to double the storage overhead of log sequence numbers just so you can have an untruncated log longer than a million terabytes, so I feel like I'm missing something here, or maybe several things. I'd much appreciate it if someone in the know could set me straight.

  Read the article

• How do I tell gcc to relax its restrictions on typecasting when calling a C function from C++?

  - by Daryl Spitzer

  I'm trying to use Cmockery to mock C functions called from C++ code. Because the SUT is in C++, my tests need to be in C++. When I use the Cmockery expect_string() macro like this: expect_string(mock_function, url, "Foo"); I get: my_tests.cpp: In function ‘void test_some_stuff(void**)’: my_tests.cpp:72: error: invalid conversion from ‘void*’ to ‘const char*’ my_tests.cpp:72: error: initializing argument 5 of ‘void _expect_string(const char*, const char*, const char*, int, const char*, int)’ I see in cmockery.h that expect_string is defined: #define expect_string(function, parameter, string) \ expect_string_count(function, parameter, string, 1) #define expect_string_count(function, parameter, string, count) \ _expect_string(#function, #parameter, __FILE__, __LINE__, (void*)string, \ count) And here's the prototype for _expect_string (from cmockery.h): void _expect_string( const char* const function, const char* const parameter, const char* const file, const int line, const char* string, const int count); I believe the problem is that I'm compiling C code as C++, so the C++ compiler is objecting to (void*)string in the expect_string_count macro being passed as the const char* string parameter to the _expect_string() function. I've already used extern "C" around the cmockery.h include in my_tests.cpp like this: extern "C" { #include <cmockery.h> } ...in order to get around name-mangling problems. (See "How do I compile and link C++ code with compiled C code?") Is there a command-line option or some other means of telling g++ how to relax its restrictions on typecasting from my test's C++ code to the C function in cmockery.c? This is the command I'm currently using to build my_tests.cpp: g++ -m32 -I ../cmockery-0.1.2 -c my_tests.cpp -o $(obj_dir)/my_tests.o

  Read the article

• Why isn't this simple PHP/MySQL code working?

  - by Sammy

  I am very new to php/mysql and this is causing me to loose hairs, I am trying to build a multi level site navigation. In this part of my script I am readying the sub and parent categories coming from a form for insertion into the database: // get child categories $catFields = $_POST['categories']; if (is_array($catFields)) { $categories = $categories; for ($i=0; $i<count($catFields); $i++) { $categories = $categories . $catFields[$i]"; } } // get parent category $select = mysql_query ("SELECT parent FROM categories WHERE id = $categories"); while ($return = mysql_fetch_assoc($select)) { $parentId = $return['parent']; } The first part of my script works fine, it grabs all the categories that the user has chosen to assign a post by checking the checkboxes in a form and readies it for insertion into the database. But the second part does not work and I can't understand why. I am trying to match a category with a parent that is stored in it's own table, but it returns nothing even though the categories all have parents. Can anyone tell me why this is? p.s. The $categories variable contains the sub category id.

  Read the article

• A Digg-like rotating homepage of popular content, how to include date as a factor?

  - by Ferdy

  I am building an advanced image sharing web application. As you may expect, users can upload images and others can comments on it, vote on it, and favorite it. These events will determine the popularity of the image, which I capture in a "karma" field. Now I want to create a Digg-like homepage system, showing the most popular images. It's easy, since I already have the weighted Karma score. I just sort on that descendingly to show the 20 most valued images. The part that is missing is time. I do not want extremely popular images to always be on the homepage. I guess an easy solution is to restrict the result set to the last 24 hours. However, I'm also thinking that in order to keep the image rotation occur throughout the day, time can be some kind of variable where its offset has an influence on the image's sorting. Specific questions: Would you recommend the easy scenario (just sort for best images within 24 hours) or the more sophisticated one (use datetime offset as part of the sorting)? If you advise the latter, any help on the mathematical solution to this? Would it be best to run a scheduled service to mark images for the homepage, or would you advise a direct query (I'm using MySQL) As an extra note, the homepage should support paging and on a quiet day should include entries of days before in order to make sure it is always "filled" I'm not asking the community to build this algorithm, just looking for some advise :)

  Read the article

• Objective-C basics: subclassing and member variable accessability

  - by Krumelur

  Hi, Code below is pseudo code. Imagine a class "Fruit" which has a factory method to create a fruit. interface Fruit { } +(Fruit*) createFruit: { return [[Fruit alloc] init autorelease]; } Now I want to subclass the Fruit to get an Apple: interface Apple : Fruit { int iSeeds; } +(Apple*) createAppleWithColor: (int) iSeeds { Apple* oApple = [Apple createFruit:]; oApple.iSeeds = iSeeds; return oApple; } Questions: How can I make "iSeeds" private so it cannot be changed from outside? If I add a "private" keyword it does not build anymore. Still I want to set iSeeds from inside my Apple's factory method. I want users allow to READ the content of iSeeds. So I suppose I should have a getter but I can't get it to work. I always get some error about "LValue assignment". The Fruit's createFruit is making use of autorelease. Does the Apple have to reatin/release anything? René

  Read the article

• Cocos2d shake/accelerometer issue.

  - by Ryan Poolos

  So I a little backstory. I wanted to implement a particle effect and sound effect that both last about 3 sec or so when the user shakes their iDevice. But first issue arrived when the build in UIEvent for shakes refused to work. So I took the advice of a few Cocos veterans to just use some script to get "violent" accelerometer inputs as shakes. Worked great until now. The problem is that if you keep shaking it just stacks the particle and sounds over and over. Now this wouldn't be that big of a deal except it happens even if you are careful to try and not do so. So what I am hoping to do is disable the accelerometer when the particle effect/sound effect start and then reenable it as soon as they finish. Now I don't know if I should do this by schedule, NStimer, or some other function. I am open to ALL suggestions. here is my current "shake" code. - (void)accelerometer:(UIAccelerometer *)accelerometer didAccelerate:(UIAcceleration *)acceleration { const float violence = 1; static BOOL beenhere; BOOL shake = FALSE; if (beenhere) return; beenhere = TRUE; if (acceleration.x > violence * 1.5 || acceleration.x < (-1.5* violence)) shake = TRUE; if (acceleration.y > violence * 2 || acceleration.y < (-2 * violence)) shake = TRUE; if (acceleration.z > violence * 3 || acceleration.z < (-3 * violence)) shake = TRUE; if (shake) { id particleSystem = [CCParticleSystemQuad particleWithFile:@"particle.plist"]; [self addChild: particleSystem]; // Super simple Audio playback for sound effects! [[SimpleAudioEngine sharedEngine] playEffect:@"Sound.mp3"]; shake = FALSE; } beenhere = FALSE; }

  Read the article

• rails Creating a model instance automatically when another is created

  - by bob

  Hello I have a user model and a ratings model. Whenever a new user is created I want to create a new feedback model with it automatically. Each user model has one feedback model and each feedback model has many ratings. My Classes class User < ActiveRecord::Base end class Feedback < ActiveRecord::Base belongs_to :user has_many :ratings end class Rating < ActiveRecord::Base belongs_to :feedback end My database tables -user doesn't have anything special -feedback has user_id. This user_id should be the same as the user that has just been created. For example, user_id of 1 is created, then a feedback model should be created that belongs to user_id of 1. So the user_id column in the feedback database will also be 1. - Rating has a feedback_id and a user_id the user_id in this case is the id of the person who submitted the rating. I am having it assigned through the build command. I believe my process is correct here. The Goal The goal is to have each user have a feedback table that has many ratings from other users. So if someone goes to the feedback page, they will see all the ratings given and by who. Is there a better way to approach this? How do you create a model of feedback with the same id as the user being created right when a new user is created. The idea is that when a user is created a feedback is created associated with that user so people can then go to http://localhost:3000/users/1/feedback/ and submit new ratings. I'm trying to bypass having a user rate another user with just a ratings model because I'm not sure how to do it.

  Read the article

• How to get at contents of placeholder::_1

  - by sheepsimulator

  I currently have the following code: using boost::bind; typedef boost::signal<void(EventDataItem&)> EventDataItemSignal; class EventDataItem { ... EventDataItemSignal OnTrigger; ... } typedef std::list< shared_ptr<EventDataItem> > DataItemList; typedef std::list<boost::signals::connection> ConnectionList; class MyClass { void OnStart() { DataItemList dilItems; ConnectionList clConns; DataItemList::iterator iterDataItems; for(iterDataItems = dilItems.begin(); iterDataItems != dilItems.end(); iterDataItems++) { // Create Connections from Triggers clConns.push_back((*iterDataItems)->OnTrigger.connect( bind(&MyClass::OnEventTrigger, this))); } } void OnEventTrigger() { // ... Do stuff on Trigger... } } I'd like to change MyClass::OnStart to use std::transform to achieve the same thing: void MyClass::OnStart() { DataItemList dilItems; ConnectionList clConns; // Resize connection list to match number of data items clConns.resize(dilItems.size()); // Build connection list from Items // note: errors on the placeholder _1->OnTrigger std::transform(dilItems.begin(), dilItems.end(), clConns.begin(), bind(&EventDataItemSignal::connect, _1->OnTrigger, bind(&MyClass::Stuff, this))); } However, my hiccup is _1-OnTrigger. How can I reference OnTrigger from placeholder _1?

  Read the article

• Powershell invoke-command with PSCredential in line

  - by jaffa

  I need to be able to run a command on another server. This script acts as a bootstrap to another script which is run on the actual server. This works great on servers on the same domain, but if I need to run this script on a remote server, I need to specify credentials. The command is kicked off from a Msbuild targets file like so: <Target Name="PreDeployment" Condition="true" BeforeTargets="MSDeployPublish"> <Exec Command="powershell.exe -ExecutionPolicy Bypass invoke-command bootstrapScript.ps1 -computername $(MyServer) -argumentlist param1, param2" /> </Target> However, I need to be able to supply the credentials by creating a new PSCredentials object with a secure password for my deployment script to run on a remote server: <Target Name="PreDeployment" Condition="true" BeforeTargets="MSDeployPublish"> <Exec Command="powershell.exe -ExecutionPolicy Bypass invoke-command bootstrapScript.ps1 -computername $(MyServer) -credential New-Object System.Management.Automation.PSCredential ('admin', (convertto-securestring $(Password) -asplaintext -force)) -argumentlist param1, param2" /> </Target> When I run the build, a dialog pops up with the username set to System.Management.Automation.PSCredential. I need to be able to create the credentials in-line on the executable target. How do I accomplish this?

  Read the article

• g++ on MacOSX doesn't work with -arch ppc64

  - by Albert

  I am trying to build a Universal binary on MacOSX with g++. However, it doesn't really work. I have tried with this simple dummy code: #include <iostream> using namespace std; int main() { cout << "Hello" << endl; } This works fine: % g++ test.cpp -arch i386 -arch ppc -arch x86_64 -o test % file test test: Mach-O universal binary with 3 architectures test (for architecture i386): Mach-O executable i386 test (for architecture ppc7400): Mach-O executable ppc test (for architecture x86_64): Mach-O 64-bit executable x86_64 However, this does not: % g++ test.cpp -arch i386 -arch ppc -arch x86_64 -arch ppc64 -o test In file included from test.cpp:1: /usr/include/c++/4.2.1/iostream:44:28: error: bits/c++config.h: No such file or directory In file included from /usr/include/c++/4.2.1/ios:43, from /usr/include/c++/4.2.1/ostream:45, from /usr/include/c++/4.2.1/iostream:45, from test.cpp:1: /usr/include/c++/4.2.1/iosfwd:45:29: error: bits/c++locale.h: No such file or directory /usr/include/c++/4.2.1/iosfwd:46:25: error: bits/c++io.h: No such file or directory In file included from /usr/include/c++/4.2.1/bits/ios_base.h:45, from /usr/include/c++/4.2.1/ios:48, from /usr/include/c++/4.2.1/ostream:45, from /usr/include/c++/4.2.1/iostream:45, from test.cpp:1: /usr/include/c++/4.2.1/ext/atomicity.h:39:23: error: bits/gthr.h: No such file or directory /usr/include/c++/4.2.1/ext/atomicity.h:40:30: error: bits/atomic_word.h: No such file or directory ... Any idea why that is? I have installed Xcode 3.2.2 with all SDKs it comes with.

  Read the article

• Why would fopen fail to open a file that exists?

  - by void

  I'm on Windows XP using Visual Studio 6 (yes I know it's old) building/maintaining a C++ DLL. I'm encountered a problem with fopen failing to open an existing file, it always returns NULL. I've tried: Checking errno and _doserrno by setting both to zero and then checking them again, both remain zero, and thus GetLastError() reports no errors. I know fopen isn't required to set errno when it encounters an error according to a C standard. Hardcoding the file path, which are not relative. Tried on another developers machine which the same result. The really strange thing is CreateFile works and the file can be read with ReadFile. We believe this works in a release build, however we are also seeing some very odd behaviour in other areas of the application and we're not sure if this is related. The code is below, I don't see anything odd it looks quite standard to me. The source file hasn't changed for just under half a year. HRESULT CDataHandler::LoadFile( CStdString szFilePath ) { //Code FILE* pFile; if ( NULL == ( pFile = fopen( szFilePath.c_str(), "rb") ) ) { return S_FALSE; } //More code }

  Read the article

• Is there only one distribution certificate per team leader or one per application?

  - by dbonneville

  I'm confused by the dev and dist cert. I got one app in the store, but I named my certs after my first app. Was this a mistake? I'm ready to go on my second app. But XCode is selected the dist cert with the old app name on it. It built without error. Though I named it wrong, will it still work? XCode is automatically picking this cert for me. Is this right? You need a new app ID for each app so you can 1) put in plist, 2) put in code signing section on Build tab of Target info, but you don't need a new dev and dist cert for each new app. Therefore is this right too? For each app you develop, you only need your original dev and dist cert, but a new app ID for each app. This is so obscure! I wish apple had done a better job!

  Read the article

• Custom Calculations in a Matrix - Reporting Services 2005

  - by bfrancis

  I am writing a report to show gas usage (in gallons) used by each department. The request is to view each month and the gallons used by each department. A column is required to display what each departments target goal is, based on the gallons of gas they have used in a past time frame. Each departments target goal is x percent less than the total gallons used for said time frame. I currently have a matrix in Reporting Services with departments making up rows, months making up columns, and gallons filling the details. The matrix is being filled by dataset1. I have the data grouping as is requested for each month by each department. My problem is calculating the target goal. My thought was to create a second dataset (dataset2) that returns the gallons used based on the time frame requested. I grouped this data by department. I was hoping I could use the department field in each dataset to make sure the appropriate numbers were used. I added a new column which shows up next to the gallons field. As I attempted to build the Expression I found out that I could only grab the gallons used from dataset2 if I was summing the gallons field. This gives me the total gallons used by every department combined. I have tried to find resources with similar examples of what I am trying to accomplish but I cannot seem to come across one. I am trying to keep this as detailed as possible without making it too wordy. I would be more than happy to clarify or explain into further detail what I have written above if it is needed. If anyone has links, comments, or suggestions they would be greatly appreciated. A very simple visual or what I am hoping to accomplish is below. The months and departments would expand based on the data returned. months ------------------------------ departments| gallons/month | target goal

  Read the article

• Merging sql queries to get different results by date

  - by pedalpete

  I am trying to build a 'recent events' feed and can't seem to get either my query correct, or figure out how to possible merge the results from two queries to sort them by date. One table holds games/, and another table holds the actions of these games/. I am trying to get the recent events to show users 1) the actions taken on games that are publicly visible (published) 2) when a new game is created and published. So, my actions table has actionId, gameid, userid, actiontype, lastupdate My games table has gameid, startDate, createdby, published, lastupdate I currently have a query like this (simplified for easy understanding I hope). SELECT actionId, actions.gameid, userid, actiontype, actions.lastupdate FROM actions JOIN ( SELECT games.gameid, startDate, createdby, published, games.lastupdate FROM games WHERE published=1 AND lastupdate>today-2 ) publishedGames on actions.gameid=games.gameid WHERE actions.type IN (0,4,5,6,7) AND actions.lastupdate>games.lastupdate and published=1 OR games.lastupdate>today-2 AND published=1 This query is looking for actions from published games where the action took place after the game was published. That pretty much takes care of the first thing that needs to be shown. However, I also need to get the results of the SELECT games.gameid, startDate, createdby, published, games.lastupdate FROM games WHERE published=1 AND startDate>today-2 so I can include in the actions list, when a new game has been published. When I run the query as I've got it written, I get all the actionids, and their gameids, but I don't get a row which shows the gameid when it was published. I understand that it may be possible that I need to run two seperate queries, and then somehow merge the results afterword with php, but I'm completely lost on where to start with that as well.

  Read the article

• How to compile Open Flash Chart v.1?

  - by geehertush01

  Let me just say, that I'm a total beginner in anything related to flash. I would like to compile latest version of OFC1 (v.1.9.7). It can be downloaded here: link. Unfortunately no tutorial of how to do it can be found anywhere. I succeeded in compiling OFC2 (v.Lug-Wyrm-Charmer). I installed FlashDevelop, then I found .proj file in the OFC2 package, opened it in FlashDevelop and built the project. It worked fine (although I had to fix some code errors, but it was simple). Unfortunately there is no project file in OFC1 package. I tried to create a new project (Project-New Project-AS3 Project). It created .proj file and few folders (src,bin...). I deleted 'Main.as' from 'src' folder. Then I copied all files from 'actionscript' folder from OFC1 to 'src' project folder. I opened the project and set 'open-flash-char.as' as Document Class (right click on the file in the project tree and 'Set Document Class'). Then I tried to build the project, but got an syntax error with (in 'open-flash-char.as'): #include "prototype.drawCircle.as" #include "prototype.fillCircle.as" #include "String.prototype.replace.as" So I removed "#" signs. But then I got an error ...\ofc1\projtest4\src\open-flash-chart.as: Error: A file found in a source-path must have an externally visible definition. If a definition in the file is meant to be externally visible, please put the definition in a package. I have no idea of how to continue. Maybe I'm doing everything wrong, because OFC1 is written in AS2 (probably), not AS3. I don't know. So my question is: How to compile OFC v.1.9.7?

  Read the article

• Directly call distutils' or setuptools' setup() function with command name/options, without parsing

  - by Ryan B. Lynch

  I'd like to call Python's distutils' or setuptools' setup() function in a slightly unconventional way, but I'm not sure whether distutils is meant for this kind of usage. As an example, let's say I currently have a 'setup.py' file, which looks like this (lifted verbatim from the distutils docs--the setuptools usage is almost identical): from distutils.core import setup setup(name='Distutils', version='1.0', description='Python Distribution Utilities', author='Greg Ward', author_email='[email protected]', url='http://www.python.org/sigs/distutils-sig/', packages=['distutils', 'distutils.command'], ) Normally, to build just the .spec file for an RPM of this module, I could run python setup.py bdist_rpm --spec-only, which parses the command line and calls the 'bdist_rpm' code to handle the RPM-specific stuff. The .spec file ends up in './dist'. How can I change my setup() invocation so that it runs the 'bdist_rpm' command with the '--spec-only' option, WITHOUT parsing command-line parameters? Can I pass the command name and options as parameters to setup()? Or can I manually construct a command line, and pass that as a parameter, instead? NOTE: I already know that I could call the script in a separate process, with an actual command line, using os.system() or the subprocess module or something similar. I'm trying to avoid using any kind of external command invocations. I'm looking specifically for a solution that runs setup() in the current interpreter. For background, I'm converting some release-management shell scripts into a single Python program. One of the tasks is running 'setup.py' to generate a .spec file for further pre-release testing. Running 'setup.py' as an external command, with its own command line options, seems like an awkward method, and it complicates the rest of the program. I feel like there may be a more Pythonic way.

  Read the article

• More FP-correct way to create an update sql query

  - by James Black

  I am working on access a database using F# and my initial attempt at creating a function to create the update query is flawed. let BuildUserUpdateQuery (oldUser:UserType) (newUser:UserType) = let buf = new System.Text.StringBuilder("UPDATE users SET "); if (oldUser.FirstName.Equals(newUser.FirstName) = false) then buf.Append("SET first_name='").Append(newUser.FirstName).Append("'" ) |> ignore if (oldUser.LastName.Equals(newUser.LastName) = false) then buf.Append("SET last_name='").Append(newUser.LastName).Append("'" ) |> ignore if (oldUser.UserName.Equals(newUser.UserName) = false) then buf.Append("SET username='").Append(newUser.UserName).Append("'" ) |> ignore buf.Append(" WHERE id=").Append(newUser.Id).ToString() This doesn't properly put a , between any update parts after the first, for example: UPDATE users SET first_name='Firstname', last_name='lastname' WHERE id=... I could put in a mutable variable to keep track when the first part of the set clause is appended, but that seems wrong. I could just create an list of tuples, where each tuple is oldtext, newtext, columnname, so that I could then loop through the list and build up the query, but it seems that I should be passing in a StringBuilder to a recursive function, returning back a boolean which is then passed as a parameter to the recursive function. Does this seem to be the best approach, or is there a better one?

  Read the article

• Grails XOM linkageerror - SAXParserException

  - by Stefan Kendall

  Possibly related: http://stackoverflow.com/questions/2762439/grails-attempting-to-include-htppbuilder-linkage-error I'm trying to include XOM in my grails project. How do I know which dependency library I need to exclude? I'm lost here. dependencies { build('xom:xom:1.1') { excludes "xml-apis" } } Error: java.lang.LinkageError: loader constraint violation: loader (instance of <bootloader>) previously initiated loading for a different type with name "org/xml/sax/SAXParseException" at java.lang.Class.getDeclaredMethods0(Native Method) at java.lang.Class.privateGetDeclaredMethods(Class.java:2427) at java.lang.Class.getDeclaredMethods(Class.java:1791) at java.security.AccessController.doPrivileged(Native Method) at org.codehaus.groovy.util.LazyReference.getLocked(LazyReference.java:33) at org.codehaus.groovy.util.LazyReference.get(LazyReference.java:20) at grails.util.PluginBuildSettings.getPluginInfos(PluginBuildSettings.groovy:124) at grails.util.PluginBuildSettings.getPluginInfos(PluginBuildSettings.groovy) at grails.util.PluginBuildSettings$getPluginInfos.callCurrent(Unknown Source) at grails.util.PluginBuildSettings.getPluginInfo(PluginBuildSettings.groovy:160) at grails.util.PluginBuildSettings$getPluginInfo.callCurrent(Unknown Source) at grails.util.PluginBuildSettings.getPluginInfoForSource(PluginBuildSettings.groovy:195) at org.codehaus.groovy.transform.ASTTransformationVisitor$3.call(ASTTransformationVisitor.java:303) at org.codehaus.groovy.control.CompilationUnit.applyToSourceUnits(CompilationUnit.java:820) at org.codehaus.groovy.control.CompilationUnit.doPhaseOperation(CompilationUnit.java:513) at org.codehaus.groovy.control.CompilationUnit.processPhaseOperations(CompilationUnit.java:489) at org.codehaus.groovy.control.CompilationUnit.compile(CompilationUnit.java:466) at _GrailsEvents_groovy.run(_GrailsEvents_groovy:54) at _GrailsEvents_groovy$run.call(Unknown Source) at _GrailsArgParsing_groovy$run.call(Unknown Source) at _GrailsArgParsing_groovy.run(_GrailsArgParsing_groovy:29) at _GrailsArgParsing_groovy$run.call(Unknown Source) at _GrailsInit_groovy$run.call(Unknown Source) at _GrailsInit_groovy.run(_GrailsInit_groovy:38) at _GrailsInit_groovy$run.call(Unknown Source) at Help_.run(Help_.groovy:27) at Help_$run.call(Unknown Source) at gant.Gant.processTargets(Gant.groovy:494) at gant.Gant.processTargets(Gant.groovy:480)

  Read the article

• Where should you put 3rd party .NET dlls when using git submodules to avoid duplication

  - by Tim Abell

  I have two .NET library projects in Visual Studio 2008 that both make use of the MySql Connector for .NET (MySql.Data.dll). These libraries are then in turn both used by a .NET command line application which also uses the Connector. The library projects are pulled in to the application's solution as git submodules and referenced by project in Visual Studio. I'm looking for the most effective strategy for storing and referencing the MySql Connector library. I have tried having the MySql.Data.dll checked in to all three projects (in their root folder), this was problematic when one project changed to a newer version of the connector dll. Although each project had its own version of the dll, only one was packaged into the resultant application leading to an API mismatch which was hard to pin down. This has put me off this approach. I have tried having the command line application reference the connector dll that is held in a submodule, however this only removes the possibility of version mismatches when there is only one submodule rather than two as in this case. I am contemplating putting the dll in the global assembly cache (GAC) of all machines that need to build or use the application, but I'm wary of not having all dependencies for an application available in source control.

  Read the article

• Masters in Computer Science

  - by reko

  Hi, My name is Gautam. I come from India. I am extremely passionate about Web Development.. I like to build web applications all the time.. Can I make this web application building a full time profession? I have just graduated from bachelors... Is there a Master of Computer Science in Web Development? Can I choose Masters in Web Development? Is it a bad choice? Is there a course very close to it Web Development that I can choose? Should I just keep Web Development as a part time thing to do?? Could you please let me know any good universities which offer this course/ close to this course for Spring 2010? Please advice on what I should do because my mind keeps throwing millions of questions on what I should do and my only hope is STACKOVERFLOW helps me as it always does to solve problems.. Looking forward for your reply.. Thanks in advance Regards, Gautam

  Read the article

• Is this the right way to organize my database tables?

  - by Moss

  So I'm making a website that allows users to build contact lists. So their are users, the users have lists, and the lists have contacts. It seems to me that I need 3 tables for this but I just want to make sure. There would be a User table of course, and then a "List of Lists" table that has the username, and listname, as primary key along with whatever other info we want to attach to the lists as a whole. Finally, for lack of a better word, the List table which would again have the username/listname p.k., then the contact ID and notes and such that the user attaches to that contact on that specific list. I hope that is a clear explanation. For some reason I feel unsure about this arrangement. For one thing if the website becomes popular the List table could swell to billions of rows. And it also feels a little weird that everybody's list info is all jumbled up in the same table. I suppose I could create separate tables for each user and even for each list but that seems like a bad idea for other reasons. My db explanation assumes I can use foreign keys on my tables which at the moment isn't actually an option. If I can't get InnoDB tables enabled I will probably use ID's for the lists instead of depending on a compound key. Maybe I should do this anyway?

  Read the article

• How to hide some nodes in Richfaces Tree (do not render nodes by condition)?

  - by VestniK

  I have a tree of categories and courses in my SEAM application. Courses may be active and inactive. I want to be able to show only active or all courses in my tree. I've decided to always build complete tree in my PAGE scope component since building this tree is quite expensive operation. I have boolean flag courseActive in the data wrapped by TreeNode<T>. Now I can't find the way to show courses node only if this flag is true. The best result I've achieved with the following code: <h:outputLabel for="showInactiveCheckbox" value="show all courses: "/> <h:selectBooleanCheckbox id="showInactiveCheckbox" value="#{categoryTreeEditorModel.showAllCoursesInTree}"> <a4j:support event="onchange" reRender="categoryTree"/> </h:selectBooleanCheckbox> <rich:tree id="categoryTree" value="#{categoryTree}" var="item" switchType="ajax" ajaxSubmitSelection="true" reRender="categoryTree,controls" adviseNodeOpened="#{categoryTreeActions.adviseRootOpened}" nodeSelectListener="#{categoryTreeActions.processSelection}" nodeFace="#{item.typeName}"> <rich:treeNode type="Category" icon="..." iconLeaf="..."> <h:outputText value="#{item.title}"/> </rich:treeNode> <rich:treeNode type="Course" icon="..." iconLeaf="..." rendered="#{item.courseActive or categoryTreeEditorModel.showAllCoursesInTree}"> <h:outputText rendered="#{item.courseActive}" value="#{item.title}"/> <h:outputText rendered="#{not item.courseActive}" value="#{item.title}" style="color:#{a4jSkin.inactiveTextColor}"/> </rich:treeNode> </rich:tree> the only problem is if some node is not listed in any rich:treeNode it just still shown with title obtained by Object.toString() method insted of being hidden. Does anybody know how to not show some nodes in the Richfases tree according to some condition?

  Read the article

• win32 console - form example!

  - by Bach

  I'm trying to build a simple form in a c++ win32 console application. instead of using cin and keep prompting the user to enter the details, i would like to display the form labels then using the tab key, allow the user to tab through. What is the simplest way of doing this, without having to use ncurses? all I need is cout the below all at once: Name: Username: Email: set the cursor position next to name Field, then each time you hit tab, i gotoxy, and set the cursor at the next position, then set the the cin to the next variable eg. at startup gotoxy(nameX, nameY); cin >> name; Hit Tab/enter gotoxy(usernameX, usernameY); cin >> username; Hit Tab/enter gotoxy(emailX, emailY); cin >> email; is this even doable? I tried while loops with, GetAsyncKeyState, and keyboard events, but the cin is not working properly in that loop. is there any good example for a super simple form, or reference for doing that? I know how to SetConsoleCursorPosition, but how to implement the tabbing while still being able to capture cin? thanks

  Read the article

< Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >