Search Results

Search found 16331 results on 654 pages for 'option'.

Page 594/654 | < Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >

• Antenna Aligner Part 7: Connecting the dots

  - by Chris George

  The app is basically ready, so I eagerly started to sort out creating the application entry in iTunes Connect. It's mostly intuitive actually, although I did have to create yet another icon for iTunes sized 512x512 pixels, damn lucky I did the original graphics as vector! It took me longer to write the application description than anything else, I'm so not a tech author! I didn't like the way you have to 'make up' an SKU (Stock Keeping Unit) number. I have to do some googling to find out that it really doesn't matter what it is! It should be more obvious what to do from the actual website itself. That aside, the rest of it was actually fairly straightforward. As well as the details of the application, iPhone and iPad screenshots were also required. This posed somewhat of a problem. The iPhone ones were easy (as I have one!), but I do not (yet) own an iPad . So I thought I'd leave the iPad screenshots out for now. Once the application details were sorted, I moved onto the rights and pricing. At the start of the project I had made the decision that I wouldn't charge any more than the lowest amount £0.59. I believe there is a market for this, but as my first foray into app development I didn't want to take the mick. I did realise, however, that I had built my app with a developer certificate and provisioning profile. This was fairly quickly corrected, and again Nomad made this very easy to switch over to the distribution certificate and provisioning profile. With a sense of excitement I cracked open iTunes connect and clicked the upload button ... ...slight snag... . when the Nomad project was started, Apple allowed uploads of these binaries via iTunes Connect. But this is no longer possible, the only upload path is via the Application Loader available from the Apple Developer program. This itself has one limitation, it only runs on a mac! D'OH!!!  Actually my language was somewhat more colourful when this fact came to light. After picking my laptop up off the floor and putting it back together... ok only joking, but I did nearly throw it out of frustration!... I started to consider the options; I briefly entertained the idea of buying a cheap mac from ebay... no, that defeats the whole object of what I'm doing, plus my wife wouldn't be impressed there are some guys out there in the interweb who will upload your app for a small fee...but I don't really like the idea of giving some faceless email address my apple developer login details, as well as my app binary! find some willing friend with a mac who would kindly let me use it... obviously this is the only sensible option. In the meantime, I informed the Nomad team about this slight 'issue' and they are currently investigating possible solutions...

  Read the article

• When row estimation goes wrong

  - by Dave Ballantyne

  Whilst working at a client site, I hit upon one of those issues that you are not sure if that this is something entirely new or a bug or a gap in your knowledge. The client had a large query that needed optimizing.  The query itself looked pretty good, no udfs, UNION ALL were used rather than UNION, most of the predicates were sargable other than one or two minor ones.  There were a few extra joins that could be eradicated and having fixed up the query I then started to dive into the plan. I could see all manor of spills in the hash joins and the sort operations,  these are caused when SQL Server has not reserved enough memory and has to write to tempdb.  A VERY expensive operation that is generally avoidable.  These, however, are a symptom of a bad row estimation somewhere else, and when that bad estimation is combined with other estimation errors, chaos can ensue. Working my way back down the plan, I found the cause, and the more I thought about it the more i came convinced that the optimizer could be making a much more intelligent choice. First step is to reproduce and I was able to simplify the query down a single join between two tables, Product and ProductStatus,  from a business point of view, quite fundamental, find the status of particular products to show if ‘active’ ,’inactive’ or whatever. The query itself couldn’t be any simpler The estimated plan looked like this: Ignore the “!” warning which is a missing index, but notice that Products has 27,984 rows and the join outputs 14,000. The actual plan shows how bad that estimation of 14,000 is : So every row in Products has a corresponding row in ProductStatus.  This is unsurprising, in fact it is guaranteed,  there is a trusted FK relationship between the two columns.  There is no way that the actual output of the join can be different from the input. The optimizer is already partly aware of the foreign key meta data, and that can be seen in the simplifiction stage. If we drop the Description column from the query: the join to ProductStatus is optimized out. It serves no purpose to the query, there is no data required from the table and the optimizer knows that the FK will guarantee that a matching row will exist so it has been removed. Surely the same should be applied to the row estimations in the initial example, right ?  If you think so, please upvote this connect item. So what are our options in fixing this error ? Simply changing the join to a left join will cause the optimizer to think that we could allow the rows not to exist. or a subselect would also work However, this is a client site, Im not able to change each and every query where this join takes place but there is a more global switch that will fix this error,  TraceFlag 2301. This is described as, perhaps loosely, “Enable advanced decision support optimizations”. We can test this on the original query in isolation by using the “QueryTraceOn” option and lo and behold our estimated plan now has the ‘correct’ estimation. Many thanks goes to Paul White (b|t) for his help and keeping me sane through this

  Read the article

• Ubiquitous BIP

  - by Tim Dexter

  The last number I heard from Mike and the PM team was that BIP is now embedded in more than 40 oracle products. That's a lot of products to keep track of and to help out with new releases, etc. Its interesting to see how internal Oracle product groups have integrated BIP into their products. Just as you might integrate BIP they have had to make a choice about how to integrate. 1. Library level - BIP is a pure java app and at the bottom of the architecture are a group of java libraries that expose APIs that you can use. they fall into three main areas, data extraction, template processing and formatting and delivery. There are post processing capabilities but those APIs are embedded withing the template processing libraries. Taking this integration route you are going to need to manage templates, data extraction and processing. You'll have your own UI to allow users to control all of this for themselves. Ultimate control but some effort to build and maintain. I have been trawling some of the products during a coffee break. I found a great post on the reporting capabilities provided by BIP in the records management product within WebCenter Content 11g. This integration falls into the first category, content manager looks after the report artifacts itself and provides you the UI to manage and run the reports. 2. Web Service level - further up in the stack is the web service layer. This is sitting on the BI Publisher server as a set of services, runReport and scheduleReport are the main protagonists. However, you can also manage the reports and users (locally managed) on the server and the catalog itself via the services layer.Taking this route, you still need to provide the user interface to choose reports and run them but the creation and management of the reports is all handled by the Publisher server. I have worked with a few customer on this approach. The web services provide the ability to retrieve a list of reports the user can access; then the parameters and LOVs for the selected report and finally a service to submit the report on the server. 3. Embedded BIP server UI- the final level is not so well supported yet. You can currently embed a report and its various levels of surrounding  'chrome' inside another html based application using a URL. Check the docs here. The look and feel can be customized but again, not easy, nor documented. I have messed with running the server pages inside an IFRAME, not bad, but not great. Taking this path should present the least amount of effort on your part to get BIP integrated but there are a few gotchas you need to get around. So a reasonable amount of choices with varying amounts of effort involved. There is another option coming soon for all you ADF developers out there, the ability to drop a BIP report into your application pages. But that's for another post.

  Read the article

• Q&A: Drive Online Engagement with Intuitive Portals and Websites

  - by kellsey.ruppel

  We had a great webcast yesterday and wanted to recap the questions that were asked throughout. Can ECM distribute contents to 3rd party sites?ECM, which is now called WebCenter Content can distribute content to 3rd party sites via several means as well as SSXA - Site Studio for External Applications. Will you be able to provide more information on these means and SSXA?If you have an existing JSP application, you can add the SSXA libraries to your IDE where your application was built (JDeveloper for example).  You can now drop some code into your 3rd party site/application that can both create and pull dynamically contributable content out of the Content Server for inclusion in your pages.   If the 3rd party site is not a JSP application, there is also the option of leveraging two Site Studio (not SSXA) specific custom WebCenter Content services to pull Site Studio XML content into a page. More information on SSXA can be found here: http://docs.oracle.com/cd/E17904_01/doc.1111/e13650/toc.htm Is there another way than a ”gadget” to integrate applications (like loan simulator) in WebCenter Sites?There are some other ways such as leveraging the Pagelet Producer, which is a core component of WebCenter Portal. Oracle WebCenter Portal's Pagelet Producer (previously known as Oracle WebCenter Ensemble) provides a collection of useful tools and features that facilitate dynamic pagelet development. A pagelet is a reusable user interface component. Any HTML fragment can be a pagelet, but pagelet developers can also write pagelets that are parameterized and configurable, to dynamically interact with other pagelets, and respond to user input. Pagelets are similar to portlets, but while portlets were designed specifically for portals, pagelets can be run on any web page, including within a portal or other web application. Pagelets can be used to expose platform-specific portlets in other web environments. More on Page Producer can be found here:http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_pagelet.htm#CHDIAEHG Can you describe the mechanism available to achieve the context transfer of content?The primary goal of context transfer is to provide a uniform experience to customers as they transition from one channel to another, for instance in the use-case discussed in the webcast, it was around a customer moving from the .com marketing website to the self-service site where the customer wants to manage his account information. However if WebCenter Sites was able to identify and segment the customers  to a specific category where the customer is a potential target for some promotions, the same promotions should be targeted to the customer when he is in the self-service site, which is managed by WebCenter Portal. The context transfer can be achieved by calling out the WebCenter Sites Engage Server API’s, which will identify the segment that the customer has been bucketed into. Again through REST API’s., WebCenter Portal can then request WebCenter Sites for specific content that needs to be targeted for a customer for the identified segment. While this integration can be achieved through custom integration today, Oracle is looking into productizing this integration in future releases.  How can context be transferred from WebCenter Sites (marketing site) to WebCenter Portal (Online services)?WebCenter Portal Personalization server can call into WebCenter Sites Engage Server to identify the segment for the user and then through REST API’s request specific content that needs to be surfaced in the Portal. Still have questions? Leave them in the comments section! And you can catch a replay of the webcast here.

  Read the article

• Q&A: Drive Online Engagement with Intuitive Portals and Websites

  - by kellsey.ruppel

  We had a great webcast yesterday and wanted to recap the questions that were asked throughout. Can ECM distribute contents to 3rd party sites?ECM, which is now called WebCenter Content can distribute content to 3rd party sites via several means as well as SSXA - Site Studio for External Applications. Will you be able to provide more information on these means and SSXA?If you have an existing JSP application, you can add the SSXA libraries to your IDE where your application was built (JDeveloper for example).  You can now drop some code into your 3rd party site/application that can both create and pull dynamically contributable content out of the Content Server for inclusion in your pages.   If the 3rd party site is not a JSP application, there is also the option of leveraging two Site Studio (not SSXA) specific custom WebCenter Content services to pull Site Studio XML content into a page. More information on SSXA can be found here: http://docs.oracle.com/cd/E17904_01/doc.1111/e13650/toc.htm Is there another way than a ”gadget” to integrate applications (like loan simulator) in WebCenter Sites?There are some other ways such as leveraging the Pagelet Producer, which is a core component of WebCenter Portal. Oracle WebCenter Portal's Pagelet Producer (previously known as Oracle WebCenter Ensemble) provides a collection of useful tools and features that facilitate dynamic pagelet development. A pagelet is a reusable user interface component. Any HTML fragment can be a pagelet, but pagelet developers can also write pagelets that are parameterized and configurable, to dynamically interact with other pagelets, and respond to user input. Pagelets are similar to portlets, but while portlets were designed specifically for portals, pagelets can be run on any web page, including within a portal or other web application. Pagelets can be used to expose platform-specific portlets in other web environments. More on Page Producer can be found here: http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_pagelet.htm#CHDIAEHG Can you describe the mechanism available to achieve the context transfer of content?The primary goal of context transfer is to provide a uniform experience to customers as they transition from one channel to another, for instance in the use-case discussed in the webcast, it was around a customer moving from the .com marketing website to the self-service site where the customer wants to manage his account information. However if WebCenter Sites was able to identify and segment the customers  to a specific category where the customer is a potential target for some promotions, the same promotions should be targeted to the customer when he is in the self-service site, which is managed by WebCenter Portal. The context transfer can be achieved by calling out the WebCenter Sites Engage Server API’s, which will identify the segment that the customer has been bucketed into. Again through REST API’s., WebCenter Portal can then request WebCenter Sites for specific content that needs to be targeted for a customer for the identified segment. While this integration can be achieved through custom integration today, Oracle is looking into productizing this integration in future releases.  How can context be transferred from WebCenter Sites (marketing site) to WebCenter Portal (Online services)?WebCenter Portal Personalization server can call into WebCenter Sites Engage Server to identify the segment for the user and then through REST API’s request specific content that needs to be surfaced in the Portal. Still have questions? Leave them in the comments section! And you can catch a replay of the webcast here.

  Read the article

• Graphics trouble after resuming from hibernate or suspend

  - by Voyagerfan5761

  I have a Dell Inspiron 2650 (with NVidia graphics, using nouveau drivers) that I'm using to try out Ubuntu. It's all great, except that Hibernate and Suspend aren't usable. Yes, I know that questions about power-save issues are rampant in the Linux support universe, but it seems that every time I find a solution it's for a very specific hardware combination and doesn't apply to me. So anyway, here goes. When I resume from either power-saving mode, I'll get graphics problems anywhere on the range from a few scattered random-colored pixels that won't change; all the way to full-screen patterns that don't change as I move the mouse, hit keys on the keyboard, or even bring up the shutdown dialog using the power button. Those full-screen issues (which may involve stripes with random pixels, partial black screen, or both) always end in me forcing the machine to shut down by holding the power button. I haven't done much testing yet to determine what severity level is most commonly associated with each mode, but I do avoid using either power-save option because of these issues. I'll add info on my hardware as I can gather it (no home internet connection, and this laptop is tethered to my desk by a dead battery and casing degradation). Please feel free to request something specific in the question comments. Hardware Info See this hardinfo report for my system's hardware configuration. (No, my username is not "myuser"; I sanitized hardinfo's output before publishing it.) Screenshots These screenshots are from a relatively mild occurrence, which happened after the second hibernation I took that session. The first one worked great, though I used the wireless card and Firefox heavily between the two hibernation attempts. Take a look at what happened when I opened my home directory in Nautilus and scrolled it: See below for the situations I've tested so far. The real trouble comes when the machine resumes to an unusable state; in such cases I can't even unlock the screen or properly reboot, much less take a screenshot. I have a hunch that putting a CD in the drive will cause such major failures, and I will try that at some point; see related question. Situations Tested Maverick (10.10) Suspend Seems to suspend nicely with nothing running Seems to suspend nicely with flash drive plugged in On resume from suspend with no flash drive, Terminal and gedit running: Funky graphics on top of log output, then blank screen with pixelated cursor; no response to power button (normally will shutdown 60 seconds later) Hibernate Seems to hibernate nicely with nothing running Seems to hibernate nicely with a few apps (Terminal, Mouse preferences) running Seems to not hibernate when flash drive plugged in Seems to not hibernate when System Monitor is running Have encountered failed hibernation (after several hours and one successful hibernate/thaw cycle) with no external media connected and no programs running except normal background stuff Natty LiveCD (11.04_2010-12-22) When I tested it, Natty wouldn't stay logged in. It played part of the login sound and then [ OK ] appeared in the top right corner (white-on-black terminal text) for a few seconds. Then it kicked me back to the Unlock screen. It did that four times before I gave up and just tested suspend from the Unlock screen. Suspend Resumed to vertical gray and black lines 2px (?) wide, then shifted to vertical "jail bars" of black over a black screen with above-described random pixels and mouse pointer. No apparent response to input from mouse (clicking randomly). Keyboard and touchpad unrecognized.

  Read the article

• Observing flow control idle time in TCP

  - by user12820842

  Previously I described how to observe congestion control strategies during transmission, and here I talked about TCP's sliding window approach for handling flow control on the receive side. A neat trick would now be to put the pieces together and ask the following question - how often is TCP transmission blocked by congestion control (send-side flow control) versus a zero-sized send window (which is the receiver saying it cannot process any more data)? So in effect we are asking whether the size of the receive window of the peer or the congestion control strategy may be sub-optimal. The result of such a problem would be that we have TCP data that we could be transmitting but we are not, potentially effecting throughput. So flow control is in effect: when the congestion window is less than or equal to the amount of bytes outstanding on the connection. We can derive this from args[3]-tcps_snxt - args[3]-tcps_suna, i.e. the difference between the next sequence number to send and the lowest unacknowledged sequence number; and when the window in the TCP segment received is advertised as 0 We time from these events until we send new data (i.e. args[4]-tcp_seq = snxt value when window closes. Here's the script: #!/usr/sbin/dtrace -s #pragma D option quiet tcp:::send / (args[3]-tcps_snxt - args[3]-tcps_suna) = args[3]-tcps_cwnd / { cwndclosed[args[1]-cs_cid] = timestamp; cwndsnxt[args[1]-cs_cid] = args[3]-tcps_snxt; @numclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = count(); } tcp:::send / cwndclosed[args[1]-cs_cid] && args[4]-tcp_seq = cwndsnxt[args[1]-cs_cid] / { @meantimeclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = avg(timestamp - cwndclosed[args[1]-cs_cid]); @stddevtimeclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = stddev(timestamp - cwndclosed[args[1]-cs_cid]); @numclosed["cwnd", args[2]-ip_daddr, args[4]-tcp_dport] = count(); cwndclosed[args[1]-cs_cid] = 0; cwndsnxt[args[1]-cs_cid] = 0; } tcp:::receive / args[4]-tcp_window == 0 && (args[4]-tcp_flags & (TH_SYN|TH_RST|TH_FIN)) == 0 / { swndclosed[args[1]-cs_cid] = timestamp; swndsnxt[args[1]-cs_cid] = args[3]-tcps_snxt; @numclosed["swnd", args[2]-ip_saddr, args[4]-tcp_dport] = count(); } tcp:::send / swndclosed[args[1]-cs_cid] && args[4]-tcp_seq = swndsnxt[args[1]-cs_cid] / { @meantimeclosed["swnd", args[2]-ip_daddr, args[4]-tcp_sport] = avg(timestamp - swndclosed[args[1]-cs_cid]); @stddevtimeclosed["swnd", args[2]-ip_daddr, args[4]-tcp_sport] = stddev(timestamp - swndclosed[args[1]-cs_cid]); swndclosed[args[1]-cs_cid] = 0; swndsnxt[args[1]-cs_cid] = 0; } END { printf("%-6s %-20s %-8s %-25s %-8s %-8s\n", "Window", "Remote host", "Port", "TCP Avg WndClosed(ns)", "StdDev", "Num"); printa("%-6s %-20s %-8d %@-25d %@-8d %@-8d\n", @meantimeclosed, @stddevtimeclosed, @numclosed); } So this script will show us whether the peer's receive window size is preventing flow ("swnd" events) or whether congestion control is limiting flow ("cwnd" events). As an example I traced on a server with a large file transfer in progress via a webserver and with an active ssh connection running "find / -depth -print". Here is the output: ^C Window Remote host Port TCP Avg WndClosed(ns) StdDev Num cwnd 10.175.96.92 80 86064329 77311705 125 cwnd 10.175.96.92 22 122068522 151039669 81 So we see in this case, the congestion window closes 125 times for port 80 connections and 81 times for ssh. The average time the window is closed is 0.086sec for port 80 and 0.12sec for port 22. So if you wish to change congestion control algorithm in Oracle Solaris 11, a useful step may be to see if congestion really is an issue on your network. Scripts like the one posted above can help assess this, but it's worth reiterating that if congestion control is occuring, that's not necessarily a problem that needs fixing. Recall that congestion control is about controlling flow to prevent large-scale drops, so looking at congestion events in isolation doesn't tell us the whole story. For example, are we seeing more congestion events with one control algorithm, but more drops/retransmission with another? As always, it's best to start with measures of throughput and latency before arriving at a specific hypothesis such as "my congestion control algorithm is sub-optimal".

  Read the article

• How do I configure WakeOnUSB properly?

  - by wishi

  How do I configure Wake-On-USB properly on a 10.04 or 10.10 Ubuntu (2.6.36 and higher if needed)? (Wake-on-USB is when the computer is asleep and for example a USB Keyboard event wakes up the machine!) The notebook is an Acer Aspire Timeline X 1830T. I don't know in which way the Linux Kernel supports the controllers. There are different ways to approach this, for example /proc/acpi/wakeup... or UDEV... or something with HAL? /proc/acpi/wakeup shows every device in S4, but I need S3. Device S-state Status Sysfs node P0P2 S4 *disabled PEGP S4 *disabled P0P1 S0 *disabled pci:0000:00:1e.0 EHC1 S4 *disabled pci:0000:00:1d.0 USB1 S4 *enabled USB2 S4 *disabled USB3 S4 *disabled USB4 S4 *disabled EHC2 S4 *disabled pci:0000:00:1a.0 USB5 S4 *disabled USB6 S4 *disabled USB7 S4 *disabled HDEF S0 *disabled pci:0000:00:1b.0 RP01 S5 *disabled pci:0000:00:1c.0 PXSX S5 *disabled pci:0000:01:00.0 RP02 S0 *disabled pci:0000:00:1c.1 PXSX S5 *disabled pci:0000:02:00.0 RP03 S0 *disabled PXSX S5 *disabled RP04 S0 *disabled PXSX S5 *disabled RP05 S0 *disabled PXSX S5 *disabled RP07 S0 *disabled PXSX S5 *disabled RP08 S0 *disabled PXSX S5 *disabled GLAN S0 *disabled PEG3 S4 *disabled PEG5 S4 *disabled PEG6 S4 *disabled SLPB S3 *enabled S4, which is Suspend-To-Disk afaik... doesn't seem to work either if I echo USB1 into the wakeup table. It just sets an S4 flag. can I get the USB ports in S3? I want to make the machine wakeup from Suspend-To-Ram (S3, ACPI standard) in case a key on my external keyboard is pressed. It only wakes up if a key on the internal Laptop keyboard is pressed... from Suspend To Ram. It seems if I plug in a USB mouse, that the USB port isn't even powered. I have no BIOS option to change this. Further specific information regarding the device: usb-devices T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 13 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04d9 ProdID=1603 Rev=03.10 S: Manufacturer= S: Product=USB Keyboard C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid root@underwater-laptop:/# lsusb [...] Bus 001 Device 013: ID 04d9:1603 Holtek Semiconductor, Inc. Bus 001 Device 004: ID 0bda:0138 Realtek Semiconductor Corp. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [...] If this doesn't work I have to properly explain why :( - but I think it is very hard to research this kernel internal. Any hints for good information here? I hope it's possible... I'm just looking for any solution. edit: this, waking up on USB, works on Windows! Thanks a lot, Marius

  Read the article

• Make your TSQL easier to read during a presentation

  - by Jonathan Allen

  SQL Server Management Studio 2012 has some neat settings that you can use to help your presentations at a SQL event better for the attendees if you are willing to spend a few minutes making some settings changes. Historically, I have been reluctant to make changes to my SSMS settings as it is such a tedious process and it’s not 100% clear that what you think you are changing is actually what gets changed. With SSMS 2012 this has become a lot easier and a lot less risky. In any session that involves TSQL there is a trade off between the speaker having all the code on screen and the attendees being able to read any of what is on screen. You (the speaker) might be able to read this when you are working on the code but plenty of your audience wont be able to make head or tail of it. SSMS 2012 has a zoom facility that can help: but don’t go nuts … Having the font too big means you will be scrolling a lot and the code will again be rendered unreadable. There is more though but you need to take a deep breath and open the Tools menu and delve into the SSMS options. In previous versions of SSMS this is a deep, dark and scary place where changing values can be obscure and sometimes catastrophic to the UI when you get back to the code editor. First things first, we set out as a good DBA and save our current (and presumably acceptable) SSMS configuration. From the import and Export Settings you can set up a file to hold all of the settings that you currently have. The wizard will open and ask you to pick an option. This time around choose to export settings. hit next and next again and then name your settings profile in the final step of the wizard and then click Finish. Once this is done then you can change whatever you like and always get back to this configuration in a couple of clicks. So what can you change to make for a good experience? Well there are plenty of things that can be altered but don’t go too mad and change too many things without taking a look at the results for every item on the list above you can change font, size, weight, colour, background colour etc. etc. but consider what you are trying to achieve and take it slowly. I have seen presenters with their settings set to have a yellow highlight and black font rather than the default pale blue background and slightly darker font so to achieve that select Text Editor and then select “Selected Text” in the Display Items listbox. As you change things the Sample area give you an idea of what effect you are going to have. Black and yellow is the colour combination with the highest contrast – that’s why bees and wasps# are that colour. What next? how about increasing the default font for your demo scripts? This means that any script you open and any new ones that you start will take on this font. No more zooming (or forgetting to) in the middle of sessions. now don’t forget to save this profile – follow the same steps as above but give the profile a different name, something like PresentationBigFontHighContrast might be appropriate. Once you are done making changes, export the settings once more and then go into the Import Export wizard and import settings from the first profile you created. Everything will be back to normal. Now making changes to suit your environment can be done very easily and with confidence. * – and warning tape and safety signs and so forth – Health and Safety officers simply copy nature!

  Read the article

• Extrapolation breaks collision detection

  - by user22241

  Before applying extrapolation to my sprite's movement, my collision worked perfectly. However, after applying extrapolation to my sprite's movement (to smooth things out), the collision no longer works. This is how things worked before extrapolation: However, after I implement my extrapolation, the collision routine breaks. I am assuming this is because it is acting upon the new coordinate that has been produced by the extrapolation routine (which is situated in my render call ). After I apply my extrapolation How to correct this behaviour? I've tried puting an extra collision check just after extrapolation - this does seem to clear up a lot of the problems but I've ruled this out because putting logic into my rendering is out of the question. I've also tried making a copy of the spritesX position, extrapolating that and drawing using that rather than the original, thus leaving the original intact for the logic to pick up on - this seems a better option, but it still produces some weird effects when colliding with walls. I'm pretty sure this also isn't the correct way to deal with this. I've found a couple of similar questions on here but the answers haven't helped me. This is my extrapolation code: public void onDrawFrame(GL10 gl) { //Set/Re-set loop back to 0 to start counting again loops=0; while(System.currentTimeMillis() > nextGameTick && loops < maxFrameskip){ SceneManager.getInstance().getCurrentScene().updateLogic(); nextGameTick+=skipTicks; timeCorrection += (1000d/ticksPerSecond) % 1; nextGameTick+=timeCorrection; timeCorrection %=1; loops++; tics++; } extrapolation = (float)(System.currentTimeMillis() + skipTicks - nextGameTick) / (float)skipTicks; render(extrapolation); } Applying extrapolation render(float extrapolation){ //This example shows extrapolation for X axis only. Y position (spriteScreenY is assumed to be valid) extrapolatedPosX = spriteGridX+(SpriteXVelocity*dt)*extrapolation; spriteScreenPosX = extrapolationPosX * screenWidth; drawSprite(spriteScreenX, spriteScreenY); } Edit As I mentioned above, I have tried making a copy of the sprite's coordinates specifically to draw with.... this has it's own problems. Firstly, regardless of the copying, when the sprite is moving, it's super-smooth, when it stops, it's wobbling slightly left/right - as it's still extrapolating it's position based on the time. Is this normal behavior and can we 'turn it off' when the sprite stops? I've tried having flags for left / right and only extrapolating if either of these is enabled. I've also tried copying the last and current positions to see if there is any difference. However, as far as collision goes, these don't help. If the user is pressing say, the right button and the sprite is moving right, when it hits a wall, if the user continues to hold the right button down, the sprite will keep animating to the right, while being stopped by the wall (therefore not actually moving), however because the right flag is still set and also because the collision routine is constantly moving the sprite out of the wall, it still appear to the code (not the player) that the sprite is still moving, and therefore extrapolation continues. So what the player would see, is the sprite 'static' (yes, it's animating, but it's not actually moving across the screen), and every now and then it shakes violently as the extrapolation attempts to do it's thing....... Hope this help

  Read the article

• Bumblebee [ERROR]Cannot access secondary GPU - error: [XORG]

  - by Lunchbox

  Though this may seem like a duplicate question, none of the suggestions I've seen have worked for me, however nearly all posters get good results. I'll start with hardware: Metabox W350ST notebook Intel Core i7 4700 16GB RAM GTX 765M (with Optimus) 128GB SSD 1TB SSHD My initial error output when trying to optirun a game is: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [133.973920] [ERROR]Aborting because fallback start is disabled. If anything else is needed to troubleshoot this just let me know. Adding bumblebee.conf: # Configuration file for Bumblebee. Values should **not** be put between quotes ## Server options. Any change made in this section will need a server restart # to take effect. [bumblebeed] # The secondary Xorg server DISPLAY number VirtualDisplay=:8 # Should the unused Xorg server be kept running? Set this to true if waiting # for X to be ready is too long and don't need power management at all. KeepUnusedXServer=false # The name of the Bumbleblee server group name (GID name) ServerGroup=bumblebee # Card power state at exit. Set to false if the card shoud be ON when Bumblebee # server exits. TurnCardOffAtExit=false # The default behavior of '-f' option on optirun. If set to "true", '-f' will # be ignored. NoEcoModeOverride=false # The Driver used by Bumblebee server. If this value is not set (or empty), # auto-detection is performed. The available drivers are nvidia and nouveau # (See also the driver-specific sections below) Driver=nvidia # Directory with a dummy config file to pass as a -configdir to secondary X XorgConfDir=/etc/bumblebee/xorg.conf.d ## Client options. Will take effect on the next optirun executed. [optirun] # Acceleration/ rendering bridge, possible values are auto, virtualgl and # primus. Bridge=auto # The method used for VirtualGL to transport frames between X servers. # Possible values are proxy, jpeg, rgb, xv and yuv. VGLTransport=proxy # List of paths which are searched for the primus libGL.so.1 when using # the primus bridge PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus # Should the program run under optirun even if Bumblebee server or nvidia card # is not available? AllowFallbackToIGC=false # Driver-specific settings are grouped under [driver-NAME]. The sections are # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto- # detection resolves to NAME). # PMMethod: method to use for saving power by disabling the nvidia card, valid # values are: auto - automatically detect which PM method to use # bbswitch - new in BB 3, recommended if available # switcheroo - vga_switcheroo method, use at your own risk # none - disable PM completely # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods ## Section with nvidia driver specific options, only parsed if Driver=nvidia [driver-nvidia] # Module name to load, defaults to Driver if empty or unset KernelDriver=nvidia PMMethod=auto # colon-separated path to the nvidia libraries LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current # comma-separated path of the directory containing nvidia_drv.so and the # default Xorg modules path XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia ## Section with nouveau driver specific options, only parsed if Driver=nouveau [driver-nouveau] KernelDriver=nouveau PMMethod=auto XorgConfFile=/etc/bumblebee/xorg.conf.nouveau DRIVER VERSION - Output of jockey-text -l: nvidia_304_updates - nvidia_304_updates (Proprietary, Enabled, Not in use)

  Read the article

• Rotating WebLogic Server logs to avoid large files using WLST.

  - by adejuanc

  By default, when WebLogic Server instances are started in development mode, the server automatically renames (rotates) its local server log file as SERVER_NAME.log.n.  For the remainder of the server session, log messages accumulate in SERVER_NAME.log until the file grows to a size of 500 kilobytes.Each time the server log file reaches this size, the server renames the log file and creates a new SERVER_NAME.log to store new messages. By default, the rotated log files are numbered in order of creation filenamennnnn, where filename is the name configured for the log file. You can configure a server instance to include a time and date stamp in the file name of rotated log files; for example, server-name-%yyyy%-%mm%-%dd%-%hh%-%mm%.log.By default, when server instances are started in production mode, the server rotates its server log file whenever the file grows to 5000 kilobytes in size. It does not rotate the local server log file when the server is started. For more information about changing the mode in which a server starts, see Change to production mode in the Administration Console Online Help.You can change these default settings for log file rotation. For example, you can change the file size at which the server rotates the log file or you can configure a server to rotate log files based on a time interval. You can also specify the maximum number of rotated files that can accumulate. After the number of log files reaches this number, subsequent file rotations delete the oldest log file and create a new log file with the latest suffix.  Note: WebLogic Server sets a threshold size limit of 500 MB before it forces a hard rotation to prevent excessive log file growth. To Rotate via WLST : #invoke WLSTC:\>java weblogic.WLST#connect WLST to an Administration Serverawls:/offline> connect('username','password')#navigate to the ServerRuntime MBean hierarchywls:/mydomain/serverConfig> serverRuntime()wls:/mydomain/serverRuntime>ls()#navigate to the server LogRuntimeMBeanwls:/mydomain/serverRuntime> cd('LogRuntime/myserver')wls:/mydomain/serverRuntime/LogRuntime/myserver> ls()-r-- Name myserver-r-- Type LogRuntime-r-x forceLogRotation java.lang.Void :#force the immediate rotation of the server log filewls:/mydomain/serverRuntime/LogRuntime/myserver> cmo.forceLogRotation()wls:/mydomain/serverRuntime/LogRuntime/myserver> The server immediately rotates the file and prints the following message: <Mar 2, 2012 3:23:01 PM EST> <Info> <Log Management> <BEA-170017> <The log file C:\diablodomain\servers\myserver\logs\myserver.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.><Mar 2, 2012 3:23:01 PM EST> <Info> <Log Management> <BEA-170018> <The log file has been rotated to C:\diablodomain\servers\myserver\logs\myserver.log00001. Log messages will continue to be logged in C:\diablodomain\servers\myserver\logs\myserver.log.> To specify the Location of the archived Log Files The following command specifies the directory location for the archived log files using the -Dweblogic.log.LogFileRotationDir Java startup option: java -Dweblogic.log.LogFileRotationDir=c:\foo-Dweblogic.management.username=installadministrator-Dweblogic.management.password=installadministrator weblogic.Server For more information read the following documentation ; Using the WebLogic Scripting Tool http://download.oracle.com/docs/cd/E13222_01/wls/docs103/config_scripting/using_WLST.html Configuring WebLogic Logging Services http://download.oracle.com/docs/cd/E12840_01/wls/docs103/logging/config_logs.html

  Read the article

• Why won't my Broadcom BCM4312 LP-PHY work with the STA driver?

  - by Jackson Taylor

  I tried the steps here for a 4312: https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx Both of these: sudo modprobe -r b43 ssb wl sudo modprobe wl return: FATAL: Module wl not found. FATAL: Error running install command for wl (this one is only for the second one actually) I tried the broadcom-sta, didn't work. What's confusing is down below in the next steps for STA with internet access it says to use the bcmwl one. So I install that and it succeeds but with some errors: sudo apt-get install bcmwl-kernel-source Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: module-assistant Use 'apt-get autoremove' to remove it. The following NEW packages will be installed: bcmwl-kernel-source 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/1,181 kB of archives. After this operation, 3,609 kB of additional disk space will be used. Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 168005 files and directories currently installed.) Unpacking bcmwl-kernel-source (from .../bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.112+bdcom-0ubuntu3) ... Loading new bcmwl-5.100.82.112+bdcom DKMS files... Building only for 3.5.0-21-generic Building for architecture x86_64 Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. ERROR: Module b43 does not exist in /proc/modules ERROR: Module b43legacy does not exist in /proc/modules ERROR: Module ssb does not exist in /proc/modules ERROR: Module bcm43xx does not exist in /proc/modules ERROR: Module brcm80211 does not exist in /proc/modules ERROR: Module brcmfmac does not exist in /proc/modules ERROR: Module brcmsmac does not exist in /proc/modules ERROR: Module bcma does not exist in /proc/modules FATAL: Module wl not found. FATAL: Error running install command for wl update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.5.0-21-generic jtaylor991@jtaylor991-whiteHP:~$ sudo modprobe wl FATAL: Module wl not found. FATAL: Error running install command for wl Then I do the modprobe wl commands listed above and it gives the above listed errors. It didn't work with the broadcom-sta driver either. I installed the b43 ones but nothing happened, and I don't know why so those are still installed. firmware-b43legacy-installer, b43-fwcutter and firmware-b43-lpphy-installer (yes it is a LP-PHY) are currently installed. If I go into System Settings Software Sources Additional Drivers it says "Using Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source (proprietary) But bcmwl-kernel-source isn't installed. I could try again but I remember rebooting and it still said this. What's funny is it found wireless networks during the Ubuntu setup/installation, I don't remember if I got it to connect or not though. I think it kept asking for a password when I put it in (yes it was right I showed password and looked at it) so I just ignored it. But right now the Enable Wireless option in the top right is just gone, it's just Enable Networking and I'm on ethernet on this HP Pavilion dv4-1435dx right here. If I run rfkill list it shows: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no It was hard blocked at the beginning but unblocking it makes no change. Also it's a touch sensitive button, and it appears to be always orange no matter if it's enabled or not because when I touch it the hard blocked changes between yes and no in rfkill list. I think it was blue for a minute at one point. What is going on?!?! Help me! Lol, thanks for any and all of your time guys. Oh yeah this is Ubuntu 12.10 fresh install.

  Read the article

• Web Developer - How to enhance my skillset?

  - by atif089

  First of all pardon my English. I am not a native English speaker I have been a Web Developer for the past 4 years. In these 4 years I have spent my time on the internet to learn things. My current skillset comprises of HTML CSS PHP MySQL jQuery (I would not say js and rather say jQuery because I am good at using jQuery and bad with plain javascript.) The above things seemed like an easier part of my life as I quickly learned them. But now I would really like to enhance my skillset and I am pretty confused which way to move ahead considering that I have to learn things using the web and references on my own. Design My first option is towards design. Shall I get started with design and start using Adobe Illustrator, Photoshop, Flash, Flex. Designing along with my previous skills looks like a money maker to me. As both are co-related to each other when web design is considered. And its easier to learn the first 2 and I hope I can get tutorials for the last 2 as well. Marketing A lot of my existing clients asked me if I do SEO. So this looked as a good field to me as well. I cannot estimate the scope of SEO but I assume it has a long future. Since I am business minded as well and there are a lot of tutorials around, should I start with SEO, SEM, Social Media, PPC or whatever it consists of. Software Development The complex plight and hardest thing (perhaps) but the easiest way to find a decent job in my location. If I go for software development what platform should be that I should be ideally going after? Should it be C# for windows development, or ASP.NET (once again enhances my skill set), J2EE (there are a lot of jobs for J2EE developers here) or plain C and C++. Also I think it is difficult to learn software languages right from Hello World, using internet? I have no clue how I learned PHP but I am sort of a pro now, but these other languages seems like a disaster to me? I cant figure out the reason if its because PHP is easier or there was a lot of tutorials around for PHP. Anyways is it also possible to learn software development right from Hello World using the web? Database / Server (Linux) / Network Administration Seems like a job with a decent pay but less number of jobs and a bit harder to learn online. (not sure) What should be the right track I should move ahead. P.S - Age is not a constraint for me as I am between 20-21, and I come from an IT background. I know quite little basics about C (upto structures) C++ (upto objects, I was not able to understand templates) Core Java (some basics and OOP concept) RDBMS Visual Basic 6 (used to do this long back) UNIX (a bunch of commands like who, finger, chmod, ls and a bit of #bash) Or is there anything else that I left out? I need you guys to please give me a feedback and the reason why I should select that field.

  Read the article

• Recieving and organizing results without server side script (JavaScript)

  - by Aaron

  I have been working on a very large form project for the past few days. I finally managed to get tables to work properly within a javascript file that opens a new display window. Now the issue at hand is that I can't seem to get CSS code to work within the javascript that I have created. Before everyone starts thinking "just use server side script idiot" I have a few conditions and info about the file: The file is only being ran local due to confidential information risks. Once again no option for server access. The intranet the computers are on are already top security and this wouldn't exactly be a company wide program The code below is obviously just a demo with a simple form... The real file has six pages of highly confidential information Only certain fields on this form will actually be gathered (example: address doesnt appear in the results) The display page will contain data compiled into tables for easier viewing I need to be able to create css commands to easily detect certain information if it applies and along with matching design of the original form Here is the code: <html> <head> <title>Form Example</title> <script LANGUAGE="JavaScript" type="text/javascript"> function display() { DispWin = window.open('','NewWin', 'toolbar=no,status=no,width=800,height=600') message = "<body>"; message += "<table border=1 width=100%>"; message += "<tr>"; message += "<th colspan=2 align=center><font face=stencil color=black><h1>Results</h1><h4>one</h4></font>"; message += "</th>"; message += "</tr>"; message += "<td width=50% align=left>"; message += "<ul><li><b><font face=calibri color=red>NAME:</font></b> " + document.form1.yourname.value + "</UL>" message += "</td>"; message += "<td width=50% align=left>"; message += "<li><b>PHONE: </b>" + document.form1.phone.value + "</ul>"; message += "</td>"; message += "</table>"; message += "<body>"; DispWin.document.write(message); DispWin.document.body.style.cssText = 'color:#blue;'; } </script> </head> <body> <h1>Form Example</h1> Enter the following information: <form name="form1"> <p><b>Name:</b> <input TYPE="TEXT" SIZE="20" NAME="yourname"> </p> <p><b>Address:</b> <input TYPE="TEXT" SIZE="30" NAME="address"> </p> <p><b>Phone: </b> <input TYPE="TEXT" SIZE="15" NAME="phone"> </p> <p><input TYPE="BUTTON" VALUE="Display" onClick="display();"></p> </form> </body> </html> >

  Read the article

• 3 Incredibly Useful Projects to jump-start your Kinect Development.

  - by mbcrump

  I’ve been playing with the Kinect SDK Beta for the past few days and have noticed a few projects on CodePlex worth checking out. I decided to blog about them to help spread awareness. If you want to learn more about Kinect SDK then you check out my”Busy Developer’s Guide to the Kinect SDK Beta”. Let’s get started:   KinectContrib is a set of VS2010 Templates that will help you get started building a Kinect project very quickly. Once you have it installed you will have the option to select the following Templates: KinectDepth KinectSkeleton KinectVideo Please note that KinectContrib requires the Kinect for Windows SDK beta to be installed. Kinect Templates after installing the Template Pack. The reference to Microsoft.Research.Kinect is added automatically.  Here is a sample of the code for the MainWindow.xaml in the “Video” template: <Window x:Class="KinectVideoApplication1.MainWindow" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="480" Width="640"> <Grid> <Image Name="videoImage"/> </Grid> </Window> and MainWindow.xaml.cs using System; using System.Windows; using System.Windows.Media; using System.Windows.Media.Imaging; using Microsoft.Research.Kinect.Nui; namespace KinectVideoApplication1 { public partial class MainWindow : Window { //Instantiate the Kinect runtime. Required to initialize the device. //IMPORTANT NOTE: You can pass the device ID here, in case more than one Kinect device is connected. Runtime runtime = new Runtime(); public MainWindow() { InitializeComponent(); //Runtime initialization is handled when the window is opened. When the window //is closed, the runtime MUST be unitialized. this.Loaded += new RoutedEventHandler(MainWindow_Loaded); this.Unloaded += new RoutedEventHandler(MainWindow_Unloaded); //Handle the content obtained from the video camera, once received. runtime.VideoFrameReady += new EventHandler<Microsoft.Research.Kinect.Nui.ImageFrameReadyEventArgs>(runtime_VideoFrameReady); } void MainWindow_Unloaded(object sender, RoutedEventArgs e) { runtime.Uninitialize(); } void MainWindow_Loaded(object sender, RoutedEventArgs e) { //Since only a color video stream is needed, RuntimeOptions.UseColor is used. runtime.Initialize(Microsoft.Research.Kinect.Nui.RuntimeOptions.UseColor); //You can adjust the resolution here. runtime.VideoStream.Open(ImageStreamType.Video, 2, ImageResolution.Resolution640x480, ImageType.Color); } void runtime_VideoFrameReady(object sender, Microsoft.Research.Kinect.Nui.ImageFrameReadyEventArgs e) { PlanarImage image = e.ImageFrame.Image; BitmapSource source = BitmapSource.Create(image.Width, image.Height, 96, 96, PixelFormats.Bgr32, null, image.Bits, image.Width * image.BytesPerPixel); videoImage.Source = source; } } } You will find this template pack is very handy especially for those new to Kinect Development.   Next up is The Coding4Fun Kinect Toolkit which contains extension methods and a WPF control to help you develop with the Kinect SDK. After downloading the package simply add a reference to the .dll using either the WPF or WinForms version. Now you will have access to several methods that can help you save an image: (for example) For a full list of extension methods and properties, please visit the site at http://c4fkinect.codeplex.com/. Kinductor – This is a great application for just learning how to use the Kinect SDK. The project uses MVVM Light and is a great start for those looking how to structure their first Kinect Application. Conclusion: Things are already getting easier for those working with the Kinect SDK. I imagine that after a few more months we will see the SDK go out of beta and allow commercial applications to run using it. I am very excited and hope that you continue reading my blog for more Kinect, WPF and Silverlight news.  Subscribe to my feed

  Read the article

• [EF + ORACLE] Updating and Deleting Entities

  - by JTorrecilla

  Prologue In previous chapters we have seen how to insert data through EF, with and without sequences. In this one, we are going to see how to Update and delete Data from the DB. Updating data The update of the Entity Data (properties) is a very common and easy action. Before of change any of the properties of the Entity, we can check the EntityState property, and we can see that is EntityState.Unchanged.   For making an update it is needed to get the Entity which will be modified. In the following example, I use the GetEmployeeByNumber to get a valid Entity: 1: EMPLEADOS emp=GetEmployeeByNumber(2); 2: emp.Name="a"; 3: emp.Phone="2"; 4: emp.Mail="aa"; After modifying the desired properties of the Entity, we are going to check again Entitystate property, which now has the EntityState.Modified value. To persist the changes to the DB is necessary to invoke the SaveChanges function of our context. 1: context.SaveChanges(); After modifying the desired properties of the Entity, we are going to check again Entitystate property, which now has the EntityState.Modified value. To persist the changes to the DB is necessary to invoke the SaveChanges function of our context. If we check again the EntityState property we will see that the value will be EntityState.Unchanged.   Deleting Data Another easy action is to delete an Entity.   The first step to delete an Entity from the DB is to select the entity: 1: CLIENTS selectedClient = GetClientByNumber(15); 2: context.CLIENTES.DeleteObject(clienteSeleccionado); Before invoking the DeleteObject function, we will check EntityStet which value must be EntityState.Unchanged. After deleting the object, the state will be changed to EntitySate.Deleted. To commit the action we have to invoke the SaveChanges function. Aftar that, the EntityState property will be EntityState.Detached. Cascade Entity Framework lets cascade updates and deletes, although I never see cascade updates. What is a cascade delete? A cascade delete is an action that allows to delete all the related object to the object we desire to delete. This option could be established in the DB manager, or it could be in the EF model designer. For example: With a given relation (1-N) between clients and requests. The common situation must be to let delete those clients whose have no requests. If we select the relation between both entities, and press the second mouse button, we can see the properties panel of the relation. The props are: This grid shows the relations indicating the Master table(Clients) and the end point (Cabecera or Requests) The property “End 1 OnDelete” indicates the action to do when a Entity from the Master will be deleted. There are two options: - None: No action will be done, it is said, if a Entity has details entities it could not be deleted. - Cascade: It will delete all related entities to the master Entity. If we enable the cascade delete in a relation, and we invoke the DeleteObject function of the set, we could observe that all the related object indicates a Entitystate.Deleted state. Like an update, insert or common delete, until we commit the changes with SaveChanges function, the data would not be commited. Si habilitamos el borrado en cascada de una relación, e invocamos a la función DeleteObject del conjunto, podremos observar que todas las entidades de Detalle (de la relación indicada) presentan el valor EntityState.Deleted en la propiedad EntityState. Del mismo modo que en el borrado, inserción o actualización, hasta que no se invoque al método SaveChanges, los cambios no van a ser confirmados en la Base de Datos. Finally In this chapter we have seen how to update a Entity, how to delete an Entity and how to implement Cascade Deleting through EF. In next chapters we will see how to query the DB data.

  Read the article

• My shiny new gadget

  - by TechTwaddle

  About 3 months ago when I had tweeted (or twit?) that the HD7 could be my next phone I wasn’t a 100 percent sure, and when the HTC Mozart came out it was switch at first sight. I wanted to buy the Mozart mainly for three reasons; its unibody construction, smaller screen and the SLCD display. But now, holding a HD7 in my hand, I reminisce and think about how fate had its own plan. Too dramatic for a piece of gadget? Well, sort of, but seriously, this has been most exciting. So in short, I bought myself a HTC HD7 and am really loving it so far. Here are some pics (taken from my HD2 which now lies in a corner, crying),     Most of my day was spent setting up the device. Email accounts, Facebook, Marketplace etc. Since marketplace isn’t officially launched in India yet, my primary live id did not work. Whenever I tried launching marketplace it would say ‘marketplace is not currently supported in your country’. Searching the forums I found an easy work around. Just create a dummy live id with the country set to UK or US and log in to the device using this id. I was worried if the contacts and feeds from my primary live account would not be updated but that was not a problem. Adding another live account into the device does import your contacts, calendar and feeds from it. And that’s it, marketplace now works perfectly. I installed a few trial and free applications; haven’t checked if I can purchase apps though, will check that later and update this post. There is one issue I am still facing with the device, I can’t access the internet over GPRS. Windows Phone 7 only gives you the option to add an ‘APN’ and nothing else. Checking the connection settings on my HD2, I found out that there is also a proxy server I need to add to access GPRS, but so far I haven’t found a way to do that on WP7. Ideally HTC should have taken care of this, detect the operator and apply that operators settings on the device, but looks like that’s not happening. I also tried the ‘Connection Settings’ application that HTC bundled with the device, but it did nothing magical. If you’re reading this and know how to fix this problem please leave a comment. The next thing I did is install apps, a lot of apps. Read Engadget’s guide to essential apps for WP7. The apps and games I installed so far include Beezz (twitter app with push notifications), twitter (the official twitter app), Facebook, Youtube, NFS Undercover, Rocket Riot, Krashlander, Unite and the list goes on. All the apps run super smooth. The display looks fine indoors but I know it’s going to suck in bright sunlight. Anyhow, I am really impressed with what I’ve seen so far. I leave you with a few more photos. Have a great year ahead. Ciao!

  Read the article

• WIF-less claim extraction from ACS: JWT

  - by Elton Stoneman

  ACS support for JWT still shows as "beta", but it meets the spec and it works nicely, so it's becoming the preferred option as SWT is losing favour. (Note that currently ACS doesn’t support JWT encryption, if you want encrypted tokens you need to go SAML). In my last post I covered pulling claims from an ACS token without WIF, using the SWT format. The JWT format is a little more complex, but you can still inspect claims just with string manipulation. The incoming token from ACS is still presented in the BinarySecurityToken element of the XML payload, with a TokenType of urn:ietf:params:oauth:token-type:jwt: <t:RequestSecurityTokenResponse xmlns:t="http://schemas.xmlsoap.org/ws/2005/02/trust">   <t:Lifetime>     <wsu:Created xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2012-08-31T07:39:55.337Z</wsu:Created>     <wsu:Expires xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2012-08-31T09:19:55.337Z</wsu:Expires>   </t:Lifetime>   <wsp:AppliesTo xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy">     <EndpointReference xmlns="http://www.w3.org/2005/08/addressing">       <Address>http://localhost/x.y.z</Address>     </EndpointReference>   </wsp:AppliesTo>   <t:RequestedSecurityToken>     <wsse:BinarySecurityToken wsu:Id="_1eeb5cf4-b40b-40f2-89e0-a3343f6bd985-6A15D1EED0CDB0D8FA48C7D566232154" ValueType="urn:ietf:params:oauth:token-type:jwt" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">[ base64string ] </wsse:BinarySecurityToken>   </t:RequestedSecurityToken>   <t:TokenType>urn:ietf:params:oauth:token-type:jwt</t:TokenType>   <t:RequestType>http://schemas.xmlsoap.org/ws/2005/02/trust/Issue</t:RequestType>   <t:KeyType>http://schemas.xmlsoap.org/ws/2005/05/identity/NoProofKey</t:KeyType> </t:RequestSecurityTokenResponse> The token as a whole needs to be base-64 decoded. The decoded value contains a header, payload and signature, dot-separated; the parts are also base-64, but they need to be decoded using a no-padding algorithm (implementation and more details in this MSDN article on validating an Exchange 2013 identity token). The values are then in JSON; the header contains the token type and the hashing algorithm: "{"typ":"JWT","alg":"HS256"}" The payload contains the same data as in the SWT, but JSON rather than querystring format: {"aud":"http://localhost/x.y.z" "iss":"https://adfstest-bhw.accesscontrol.windows.net/" "nbf":1346398795 "exp":1346404795 "http://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationinstant":"2012-08-31T07:39:53.652Z" "http://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationmethod":"http://schemas.microsoft.com/ws/2008/06/identity/authenticationmethod/windows" "http://schemas.microsoft.com/ws/2008/06/identity/claims/windowsaccountname":"xyz" "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/emailaddress":"[email protected]" "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/upn":"[email protected]" "identityprovider":"http://fs.svc.x.y.z.com/adfs/services/trust"} The signature is in the third part of the token. Unlike SWT which is fixed to HMAC-SHA-256, JWT can support other protocols (the one in use is specified as the "alg" value in the header). How to: Validate an Exchange 2013 identity token contains an implementation of a JWT parser and validator; apart from the custom base-64 decoding part, it’s very similar to SWT extraction. I've wrapped the basic SWT and JWT in a ClaimInspector.aspx page on gitHub here: SWT and JWT claim inspector. You can drop it into any ASP.Net site and set the URL to be your redirect page in ACS. Swap ACS to issue SWT or JWT, and using the same page you can inspect the claims that come out.

  Read the article

• Does Jquery and Mootools usually have conflict if both are used on a webpage? [migrated]

  - by Charming Prince

  I have this website am designing, i tried using mootools 1.31 to animate some of the div boxes when clicked or when the mouse hover rounds it, to shows the content. the thing is that it doesn't seem to work on the webpage, but if i try the same script on a blank webpage it works, am thinking probably it's because i have Jquery 1.52 on the same page and maybe both scripts are conflicting with each other because, if i remove the Jquery, the Mootools works. What should be my option, because i need the Jquery to do some validations for me, so i can't remove it completely. Here are the codes <script> //-vertical var mySlide = new Fx.Slide('test'); $('slidein').addEvent('click', function(e){ e = new Event(e); mySlide.slideIn(); e.stop(); }); $('slideout').addEvent('click', function(e){ e = new Event(e); mySlide.slideOut(); e.stop(); }); $('toggle').addEvent('click', function(e){ e = new Event(e); mySlide.toggle(); e.stop(); }); $('hide').addEvent('click', function(e){ e = new Event(e); mySlide.hide(); e.stop(); }); </script> here's the HTML <html> <h3 class="section">Fx.Slide Vertical</h3> <a id="slideout" href="#">slideout</a> | <a id="slidein" href="#">slidein</a> | <a id="toggle" href="#"> toggle</a> | <a id="hide" href="#">hide</a> <div id="test"> Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad mi nim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum. </div> Here's the CSS #test { background: #222; color: #fff; padding: 10px; margin: 20px; border: 10px solid pink; } #test2 { background: #222; color: #fff; padding: 10px; margin: 20px; border: 10px solid pink; } Am using the exact same code supplied by Mootools in their own example, if i do this on a blank webpage it works but incorporated into my own webpage, it doesn't, and my own page just have the script tag of the Jquery in the head section of the HTML.

  Read the article

• Web Services Example - Part 1: Declarative

  - by Denis T

  In this edition of the ADF Mobile blog we'll tackle part 1 of our Web Service examples. In this posting we'll take a look at using a declarative SOAP Web Service. Getting the sample code: Just click here to download a zip of the entire project. You can unzip it and load it into JDeveloper and deploy it either to iOS or Android. Please follow the previous blog posts if you need help getting JDeveloper or ADF Mobile installed. Defining our Web Service: First off, we should mention that this sample code is using a public web service provided free by CDYNE Corporation that provides weather forecasts by zipcode. Sometimes this service goes down so please ensure you know it's up before reporting this example isn't working. Let's take a look at the web service.  We created this by using the "Web Service Data Control" from the New Gallery and using this link to this wsdl:  "http://wsf.cdyne.com/WeatherWS/Weather.asmx?WSDL"   This web service has several methods but we're interested in GetCityForecastByZIP which takes a single string parameter for the zipcode and the second method, GetWeatherInformation that enumerates all possible forecast descriptions and associated image URLs.  The latter we'll use in the next edition but we included it here for completeness. Defing the Application: After adding a feature to the adfmf-feature.xml file, we added a taskflow to host the application flow.  This comprises of a home screen with a list with items for each method in the web service, "Forecast by Zip" and "Weather Info".  In this application we've also decided to hide the navigation bar since there is only one feature in the application. Forecast by Zip: The "Forecast By ZIP" option first presents the user with a screen where they can enter a zipcode and when the "Search" button is tapped, it executes the GetCityForecastByZIP method.  This is done by binding an Action binding to that method. The easiest way to accomplish this is to just drag & drop the method from the Data Control palette to the AMX page and drop it as a button and let the framework hook it up for you.  There is an inputText component on the page that is bound to a pageFlowScope variable called "zip".  This is used as the parameter to the Action binding when it is executed.  Because the actionListener attribute of the commandButton executes the Web Service each time, we ensure that the method is invoked every time the button is clicked. Weather Info: Unlike the previous method, this time instead of explictly executing the web service method we are using deferred invocation.  What this means is that we will bind to the results of the method and the framework will execute the method when it the data is required to be rendered.  We do this by simply doing a drag & drop of the results of the GetWeatherInformation to the AMX page.  When the page is rendered and the bindings are resolved the framework invokes the method.  This executes the method only when it is needed and fills the Data Control provider.  Because we never re-execute the method, you can click from Home to Weather Info and back many times and the web service is only ever invoked once. Issues and Possible Improvements: One thing you will quickly realize with this example is that the error handling is done by the framework for you. For simple examples this is fine but for real applications you'll want to customize these error messages.  With the declarative invocation of web services, this is difficult.  This is one aspect we'll address in the second installment of the web service examples where we will show you how to do programmatic invocation which allows you better error handling. Another issue you will notice with this example is that we can enumerate the weather information but there isn't an easy way to use that information to show the corresponding description and image as part of the forecast results.  We'll show you how to do this in the next example.

  Read the article

• Blind As a Bat in Multi-Monitor Hell &ndash; Free Program Inside!

  - by ToStringTheory

  If you know me personally, then you probably know that I am going blind thanks to a rare genetic eye disease.  My eye disease has already been a huge detriment to my eyesight.  One of the big things to suffer is my ability to see small things moving fast right in front of me.  On a multi-monitor setup, this makes finding the cursor absolute hell. The Problem I’ll keep this short, as I’ve basically already told you what the problem is.  On my three monitor development computer, I am constantly losing the mouse during the day.  I had used the Microsoft accessibility mousefinder (press CTRL, and it pings around the mouse).  The problem with this is, there is only an effect around 50-100 PX around the mouse, and it is a very light gray, almost unnoticeable.. For someone like me, if I am not looking at the monitor when I click the CTRL button, I have to click it multiple times and dart my eyes back and forth in a futile attempt to catch a glimpse of the action…  I had tried other cursor finders, but none I liked… The Solution So what’s a guy to do when he doesn’t like his options?  MAKE A NEW OPTION…  What else should we as developers do, am I right?  So, I went ahead and made a mousefinder of my own, with 6 separate settings to change the effect.  I am releasing it here for anyone else that may also have problems finding their mouse at times. Some of its features include: Multiple options to change to achieve the exact effect you want. If your mouse moves while it is honing in, it will hone in on its current position. Many times, I would press the button and move my mouse at the same time, and many times, the mouse happened to be at a screen edge, so I would miss it. This program will restart its animation on a new screen if the mouse changes its screen while playing. Tested on Windows 7 x64 Stylish color changing from green to red. Deployed as a ClickOnce, so easy to remove if you don't like it. Press Right CTRL to trigger effect Application lives in notification area so that you can easily reach configuration or close it. To get it to run on startup, copy its application shortcut from its startmenu directory to the “Startup” folder in your startmenu. Conclusion I understand if you don’t download this…  You don’t know me and I don’t know you.  I can only say that I have honestly NOT added any virus’ or malware to the package. Yeah, I know it’s weird Download: ‘ToString(theory) Mousefinder.zip’ CRC32: EEBCE300 MD5: 0394DA581BE6F3371B5BA11A8B24BC91 SHA-1: 2080C4930A2E7D98B81787BB5E19BB24E118991C Finally, if you do use this application - please leave a comment, or email me and tell me what you think of it. Encounter a bug or hashes no longer match? I want to know that too! <warning type=”BadPun”>Now, stop messing around and start mousing around!</warning>

  Read the article

• New PeopleSoft HCM 9.1 On Demand Standard Edition provides a complete set of IT services at a low, predictable monthly cost

  - by Robbin Velayedam

  At Oracle Open World last month, Oracle announced that we are extending our On Demand offerings with the general availability of PeopleSoft On Demand Standard Edition. Standard Edition represents Oracle’s commitment to providing customers a choice of solutions, technology, and deployment options commensurate with their business needs and future growth. The Standard Edition offering complements the traditional On Demand offerings (Enterprise and Professional Editions) by focusing on a low, predictable monthly cost model that scales with the size of your business.   As part of Oracle's open cloud strategy, customers can freely move PeopleSoft licensed applications between on premise and the various  on demand options as business needs arise.    In today’s business climate, aggressive and creative business objectives demand more of IT organizations. They are expected to provide technology-based solutions to streamline business processes, enable online collaboration and multi-tasking, facilitate data mining and storage, and enhance worker productivity. As IT budgets remain tight in a recovering economy, the challenge becomes how to meet these demands with limited time and resources. One way is to eliminate the variable costs of projects so that your team can focus on the high priority functions and better predict funding and resource needs two to three years out. Variable costs and changing priorities can derail the best laid project and capacity plans. The prime culprits of variable costs in any IT organization include disaster recovery, security breaches, technical support, and changes in business growth and priorities. Customers have an immediate need for solutions that are cheaper, predictable in cost, and flexible enough for long-term growth or capacity changes. The Standard Edition deployment option fulfills that need by allowing customers to take full advantage of the rich business functionality that is inherent to PeopleSoft HCM, while delegating all application management responsibility – such as future upgrades and product updates – to Oracle technology experts, at an affordable and expected price. Standard Edition provides the advantages of the secure Oracle On Demand hosted environment, the complete set of PeopleSoft HCM configurable business processes, and timely management of regular updates and enhancements to the application functionality and underlying technology. Standard Edition has a convenient monthly fee that is scalable by number of employees, which helps align the customer’s overall cost of ownership with its size and anticipated growth and business needs. In addition to providing PeopleSoft HCM applications' world class business functionality and Oracle On Demand's embassy-grade security, Oracle’s hosted solution distinguishes itself from competitors by offering customers the ability to transition between different deployment and service models at any point in the application ownership lifecycle. As our customers’ business and economic climates change, they are free to transition their applications back to on-premise at any time. HCM On Demand Standard Edition is based on configurability options rather than customizations, requiring no additional code to develop or maintain. This keeps the cost of ownership low and time to production less than a month on average. Oracle On Demand offers the highest standard of security and performance by leveraging a state-of-the-art data center with dedicated databases, servers, and secured URL all within a private cloud. Customers will not share databases, environments, platforms, or access portals with other customers because we value how mission critical your data are to your business. Oracle’s On Demand also provides a full breadth of disaster recovery services to provide customers the peace of mind that their data are secure and that backup operations are in place to keep their businesses up and running in the case of an emergency. Currently we have over 50 PeopleSoft customers delegating us with the management of their applications through Oracle On Demand. If you are a customer interested in learning more about the PeopleSoft HCM 9.1 Standard Edition and how it can help your organization minimize your variable IT costs and free up your resources to work on other business initiatives, contact Oracle or your Account Services Representative today.

  Read the article

• ReSharper 8.0 EAP now available

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/28/resharper-8.0-eap-now-available.aspxJetbrains have just released |ReSharper 8.0 Beta on their Early Access |Programme at http://www.jetbrains.com/resharper/whatsnew/?utm_source=resharper8b&utm_medium=newsletter&utm_campaign=resharper&utm_content=customersResharper 8.0 comes with the following new features:Support for Visual Studio 2013 Preview. Yes, ReSharper is known to work well with the fresh preview of Visual Studio 2013, and if you have already started digging into it, ReSharper 8.0 Beta is ready for the challenge.Faster code fixes. Thanks to the new Fix in Scope feature, you can choose to batch-fix some of the code issues that ReSharper detects in the scope of a project or the whole solution. Supported fixes include removing unused directives and redundant casts.Project dependency viewer. ReSharper is now able to visualize a project dependency graph for a bird's eye view of dependencies within your solution, all without compiling anything!Multifile templates. ReSharper's file templates can now be expanded to generate more than one file. For instance, this is handy for generating pairs of a main logic class and a class for extensions, or sets of partial files.Navigation improvements. These include a new action called Go to Everything to let you search for a file, type or method name from the same input box; support for line numbers in navigation actions; a new tool window called Assembly Explorer for browsing through assemblies; and two more contextual navigation actions: Navigate to Generic Substitutions and Navigate to Assembly Explorer.New solution-wide refactorings. The set of fresh refactorings is headlined by the highly requested Move Instance Method to move methods between classes without making them static. In addition, there are Inline Parameter and Pull Parameter. Last but not least, we're also introducing 4 new XAML-specific refactorings!Extraordinary XAML support. A plethora of new and improved functionality for all developers working with XAML code includes dedicated grid inspections and quick-fixes; Extract Style, Extract, Move and Inline Resource refactorings; atomic renaming of dependency properties; and a lot more.More accessible code completion. ReSharper 8 makes more of its IntelliSense magic available in automatic completion lists, including extension methods and an option to import a type. We're also introducing double completion which gives you additional completion items when you press the corresponding shortcut for the second time.A new level of extensibility. With the new NuGet-based Extension Manager, discovering, installing and uninstalling ReSharper extensions becomes extremely easy in Visual Studio 2010 and higher. When we say extensions, we mean not only full-fledged plug-ins but also sets of templates or SSR patterns that can now be shared much more easily.CSS support improvements. Smarter usage search for CSS attributes, new CSS-specific code inspections, configurable support for CSS3 and earlier versions, compatibility checks against popular browsers - there's a rough outline of what's new for CSS in ReSharper 8.A command-line version of ReSharper. ReSharper 8 goes beyond Visual Studio: we now provide a free standalone tool with hundreds of ReSharper inspections and additionally a duplicate code finder that you can integrate with your CI server or version control system.Multiple minor improvements in areas such as decompiling and code formatting, as well as support for the Blue Theme introduced in Visual Studio 2012 Update 2.

  Read the article

• The World of SQL Database Deployment

  - by GGBlogger

  In my early development days, I used Microsoft Access for building databases. It made things easy since I only needed to package the database with the installation package so my clients would have access to it. When we began the development of a new package in Visual Studio .NET I decided to use SQL Server Express. It was free and provided good tools - also free. I thought it was a tremendous idea until it came time to distribute our new software! What a surprise. The nightmare Ah, the choices! Detach the database and have the client reattach it to a newly installed – oh wait. FIRST my new client needs to download and install SQL Server Express with SQL Server Management Studio. That’s not a great thing, but it is one more nightmare step for users who may have other versions of SQL installed. Then the question became – do we detach and reattach or do we do a backup. It was too late (bad planning) to revert to Microsoft Access but we badly needed a simple way to package and distribute both the database AND sample contents. Red Gate to the rescue It took me a while to find an answer but I did find it in a package called SQL Packager sold by a relatively unpublicized company in England called Red Gate. They call their products “ingeniously simple” and I must agree with that description. With SQL Packager you point to the database (more in a minute) you want to distribute. A few mouse clicks and dialogs and you have an executable file that you can ship virtually anywhere and virtually any way which, when run, installs the database on your destination SQL Server instance! It really is that simple. Easier to show than tell Let’s explore a hypothetical case. Let’s say you have a local SQL database of customers and you have decided you want to share it with your subsidiaries or partners. Here is the underlying screen you will see on starting SQL Packager. There are a bunch of possibilities here but I’m going to keep this relatively simple. At this point I simply want to illustrate the simplicity of generating an executable to deliver your database. You will notice that you can set up a new package, edit an existing package or change a bunch of options. Start SQL packager And the following is the default dialog you get on startup. In the next dialog, I’ve selected the Server and Database. I’ve also selected Windows Authentication. Pressing Next causes SQL Packager to run a number of checks and produce a report. Now you’re given a comprehensive list of what is going to be packaged and you’re allowed to change it if you desire. I’ve never made any changes here so I can’t really make any suggestions. The just illustrates the comprehensive nature of so many Red Gate products including this one. Clicking Next gives you still further options. SQL Packager then works its magic and shows you a dialog with the results. Packager then gives you a dialog of the scripts it has generated. The capture above only shows 1 of 4 tabs. Finally pressing Next gives you the option to generate a .NET executable of a C# project. I’ve only generated an executable so I’m not in a position to tell you what the C# project looks like. That may be the subject of further discussions. You can rename the package and tell SQL Packager where to save it. I’ve skipped a lot but this will serve to illustrate the comprehensive (and ingenious) things Red Gate does. All in all, it’s a superb way to distribute populated SQL databases. Oh – we’ll save running the resulting executable for later also but believe me it’s insanely simple.

  Read the article

< Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >