Search Results

Search found 16560 results on 663 pages for 'far'.

Page 595/663 | < Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >

  • gcc precompiled headers weird behaviour with -c option

    - by pachanga
    Folks, I'm using gcc-4.4.1 on Linux and before trying precompiled headers in a really large project I decided to test them on simple program. They "kinda work" but I'm not happy with results and I'm sure there is something wrong about my setup. First of all, I wrote a simple program(main.cpp) to test if they work at all: #include <boost/bind.hpp> #include <boost/function.hpp> #include <boost/type_traits.hpp> int main() { return 0; } Then I created the precompiled headers file pre.h(in the same directory) as follows: #include <boost/bind.hpp> #include <boost/function.hpp> #include <boost/type_traits.hpp> ...and compiled it: $ g++ -I. pre.h (pre.h.gch was created) After that I measured compile time with and without precompiled headers: with pch $ time g++ -I. -include pre.h main.cpp real 0m0.128s user 0m0.088s sys 0m0.048s without pch $ time g++ -I. main.cpp real 0m0.838s user 0m0.784s sys 0m0.056s So far so good! Almost 7 times faster, that's impressive! Now let's try something more realistic. All my sources are built with -c option and for some reason I can't make pch play nicely with it. You can reproduce this with the following steps below... I created the test module foo.cpp as follows: #include <boost/bind.hpp> #include <boost/function.hpp> #include <boost/type_traits.hpp> int whatever() { return 0; } Here are the timings of my attempts to build the module foo.cpp with and without pch: with pch $ time g++ -I. -include pre.h -c foo.cpp real 0m0.357s user 0m0.348s sys 0m0.012s without pch $ time g++ -I. -c foo.cpp real 0m0.330s user 0m0.292s sys 0m0.044s That's quite strange, looks like there is no speed up at all!(I ran timings for several times). It turned out precompiled headers were not used at all in this case, I checked it with -H option(output of "g++ -I. -include pre.h -c foo.cpp -H" didn't list pre.h.gch at all). What am I doing wrong?

    Read the article

  • Linq guru - filtering related entities...

    - by vdh_ant
    My table structure is as follows: Person 1-M PesonAddress Person 1-M PesonPhone Person 1-M PesonEmail Person 1-M Contract Contract M-M Program Contract M-1 Organization At the end of this query I need a populated object graph where each person has their: PesonAddress's PesonPhone's PesonEmail's PesonPhone's Contract's - and this has its respective Program's Now I had the following query and I thought that it was working great, but it has a couple of problems: from people in ctx.People.Include("PersonAddress") .Include("PersonLandline") .Include("PersonMobile") .Include("PersonEmail") .Include("Contract") .Include("Contract.Program") where people.Contract.Any( contract => (param.OrganizationId == contract.OrganizationId) && contract.Program.Any( contractProgram => (param.ProgramId == contractProgram.ProgramId))) select people; The problem is that it filters the person to the criteria but not the Contracts or the Contract's Programs. It brings back all Contracts that each person has not just the ones that have an OrganizationId of x and the same goes for each of those Contract's Programs respectively. What I want is only the people that have at least one contract with an OrgId of x with and where that contract has a Program with the Id of y... and for the object graph that is returned to have only the contracts that match and programs within that contract that match. I kinda understand why its not working, but I don't know how to change it so it is working... This is my attempt thus far: from people in ctx.People.Include("PersonAddress") .Include("PersonLandline") .Include("PersonMobile") .Include("PersonEmail") .Include("Contract") .Include("Contract.Program") let currentContracts = from contract in people.Contract where (param.OrganizationId == contract.OrganizationId) select contract let currentContractPrograms = from contractProgram in currentContracts let temp = from x in contractProgram.Program where (param.ProgramId == contractProgram.ProgramId) select x where temp.Any() select temp where currentContracts.Any() && currentContractPrograms.Any() select new Person { PersonId = people.PersonId, FirstName = people.FirstName, ..., ...., MiddleName = people.MiddleName, Surname = people.Surname, ..., ...., Gender = people.Gender, DateOfBirth = people.DateOfBirth, ..., ...., Contract = currentContracts, ... }; //This doesn't work But this has several problems (where the Person type is an EF object): I am left to do the mapping by myself, which in this case there is quite a lot to map When ever I try to map a list to a property (i.e. Scholarship = currentScholarships) it says I can't because IEnumerable is trying to be cast to EntityCollection Include doesn't work Hence how do I get this to work. Keeping in mind that I am trying to do this as a compiled query so I think that means anonymous types are out.

    Read the article

  • help with jquery ajax and templates in asp.net mvc

    - by NachoF
    So I have a complex form for an IncomeDeclaration. Its going to display a textfield GrossIncome for each Activity that the IncomeDeclaration is related to... this all gets done on the server and works just fine.... the problem is. The User should also be able to add Activities on the fly.. through javascript... so when the user clicks on Add Activity a Dropdown and a textfield must be appended to the bottom the activities list... heres what Ive got so far <tbody id="activities"> @Html.EditorFor(model => model.income.EconomicActivityIncomeDeclarations) </tbody> </table> <a href="#" id="add_activity">Agregar Otra Actividad</a> </fieldset> <script type="text/javascript"> $("#add_activity").click(function () { $.getJSON('/IncomeDeclarations/GetEconomicActivities', function (data) { var select = new Select(); var data = new Array(); for (var i = 0; i < data.length; i++) { var option = new Option(data[i]["name"], data[i]["i"]) //should do something here } //should call the template and append to #activities }); }); </script> <script id="template" type="text/x-jquery-tmpl"> <tr> <td><select name="income.EconomicActivityIncomeDeclarations[${SomeNumber}].EconomicActivityId"> ${MyOptions} </select></td> <td><input type="text" name="income.EconomicActivityIncomeDeclarations[${SomeNumber}].GrossIncome" /></td>> </tr> </script> } The name attribute for both the select and the text_field is key for this to work... otherwise modelbinding wont work... I would think that if the SomeNumber variable is set to new Date.GetTime() model Binding should work just fine... I actually dont see the need of ajax for this but thats another topic.. I just havent figured out a way to do this without ajax... right now I want to get the template to work and append the form elements to the bottom of the list.

    Read the article

  • Should an event-sourced aggregate root have query access to the event sourcing repository?

    - by JD Courtoy
    I'm working on an event-sourced CQRS implementation, using DDD in the application / domain layer. I have an object model that looks like this: public class Person : AggregateRootBase { private Guid? _bookingId; public Person(Identification identification) { Apply(new PersonCreatedEvent(identification)); } public Booking CreateBooking() { // Enforce Person invariants var booking = new Booking(); Apply(new PersonBookedEvent(booking.Id)); return booking; } public void Release() { // Enforce Person invariants // Should we load the booking here from the aggregate repository? // We need to ensure that booking is released as well. var booking = BookingRepository.Load(_bookingId); booking.Release(); Apply(new PersonReleasedEvent(_bookingId)); } [EventHandler] public void Handle(PersonBookedEvent @event) { _bookingId = @event.BookingId; } [EventHandler] public void Handle(PersonReleasedEvent @event) { _bookingId = null; } } public class Booking : AggregateRootBase { private DateTime _bookingDate; private DateTime? _releaseDate; public Booking() { //Enforce invariants Apply(new BookingCreatedEvent()); } public void Release() { //Enforce invariants Apply(new BookingReleasedEvent()); } [EventHandler] public void Handle(BookingCreatedEvent @event) { _bookingDate = SystemTime.Now(); } [EventHandler] public void Handle(BookingReleasedEvent @event) { _releaseDate = SystemTime.Now(); } // Some other business activities unrelated to a person } With my understanding of DDD so far, both Person and Booking are seperate aggregate roots for two reasons: There are times when business components will pull Booking objects separately from the database. (ie, a person that has been released has a previous booking modified due to incorrect information). There should not be locking contention between Person and Booking whenever a Booking needs to be updated. One other business requirement is that a Booking can never occur for a Person more than once at a time. Due to this, I'm concerned about querying the query database on the read side as there could potentially be some inconsistency there (due to using CQRS and having an eventually consistent read database). Should the aggregate roots be allowed to query the event-sourced backing store for objects (lazy-loading them as needed)? Are there any other avenues of implementation that would make more sense?

    Read the article

  • IE won't load PDF in a window created with window.open

    - by Dean
    Here's the problem, which only occurs in Internet Explorer (IE). I have a page that has links to several different types of files. Links from these files execute a Javascript function that opens a new window and loads the specific file. This works great, unless the file I need to open in the new window is a PDF in which case the window is blank, even though the URL is in the address field. Refreshing that window using F5 doesn't help. However, if I put the cursor in the address field and press <enter> the PDF loads right up. This problem only occurs in IE. I have seen it in IE 7 and 8 and am using Adobe Acrobat Reader 9. In Firefox (PC and Mac) everything works perfectly. In Chrome (Mac), the PDF is downloaded. In Safari (Mac) it works. In Opera (Mac) it prompts me to open or save. Basically, everything probably works fine, except for IE. I have searched for similar problems and have seen some posts where it was suggested to adjust some of the Internet Options on IE. I have tried this but it doesn't help, and the problem wasn't exactly the same anyway. Here's the Javascript function I use to open the new window. function newwin(url,w,h) { win = window.open(url,"temp","width="+w+",height="+h+",menubar=yes,toolbar=yes,location=yes,status=yes,scrollbars=auto,resizable=yes"); win.focus(); } You can see that I pass in the URL as well as the height, h, and width, w, of the window. I've used a function like this for years and as far as I know have never had a problem. I call the newwin() function using this. <a href="javascript:newwin('/path/document.pdf',400,300)">document.pdf</a> (Yes, I know there are other, better ways than using inline JS, and I've even tried some of them because I've run out of things to try, but nothing works.) So, if anyone has an idea as to what might be causing this problem, I'd love to hear it.

    Read the article

  • VBA/SQL recordsets

    - by intruesiive
    The project I'm asking about is for sending an email to teachers asking what books they're using for the classes they're teaching next semester, so that the books can be ordered. I have a query that compares the course number of this upcoming semester's classes to the course numbers of historical textbook orders, pulling out only those classes that are being taught this semester. That's where I get lost. I have a table that contains the following: -Professor -Course Number -Year -Book -Title The data looks like this: professor year course number title smith 13 1111 Pride and Prejudice smith 13 1111 The Fountainhead smith 13 1222 The Alchemist smith 12 1111 Pride and Prejudice smith 11 1222 Infinite Jest smith 10 1333 The Bible smith 13 1333 The Bible smith 12 1222 The Alchemist smith 10 1111 Moby Dick johnson 12 1222 The Tipping Point johnson 11 1333 Anna Kerenina johnson 10 1333 Everything is Illuminated johnson 12 1222 The Savage Detectives johnson 11 1333 In Search of Lost Time johnson 10 1333 Great Expectations johnson 9 1222 Proust on the Shore Here's what I need the code to do "on paper": Group the records by professor. Determine every unique course number in that group, and group records by course number. For each unique course number, determine the highest year associated. Then spit out every record with that professor+course number+year combination. With the sample data, the results would be: professor year course number title smith 13 1111 Pride and Prejudice smith 13 1111 The Fountainhead smith 13 1222 The Alchemist smith 13 1333 The Bible johnson 12 1222 The Tipping Point johnson 11 1333 Anna Kerenina johnson 12 1222 The Savage Detectives johnson 11 1333 In Search of Lost Time I'm thinking I should make a record set for each teacher, and within that, another record set for each course number. Within the course number record set, I need the system to determine what the highest year number is - maybe store that in a variable? Then pull out every associated record so that if the teacher ordered 3 books the last time they taught that class (whether it was in 2013 or 2012 and so on) all three books display. I'm not sure I'm thinking of record sets in the right way, though. My SQL so far is basic and clearly doesn't work: SELECT [All].Professor, [All].Course, Max([All].Year) FROM [All] GROUP BY [All].Professor, [All].Course; Thanks for your help.

    Read the article

  • Performing dynamic sorts on EF4 data

    - by Jaxidian
    I'm attempting to perform dynamic sorting of data that I'm putting into grids into our MVC UI. Since MVC is abstracted from everything else via WCF, I've created a couple utility classes and extensions to help with this. The two most important things (slightly simplified) are as follows: public static IQueryable<T> ApplySortOptions<T, TModel, TProperty>(this IQueryable<T> collection, IEnumerable<ISortOption<TModel, TProperty>> sortOptions) where TModel : class { var sortedSortOptions = (from o in sortOptions orderby o.Priority ascending select o).ToList(); var results = collection; foreach (var option in sortedSortOptions) { var currentOption = option; var propertyName = currentOption.Property.MemberWithoutInstance(); var isAscending = currentOption.IsAscending; if (isAscending) { results = from r in results orderby propertyName ascending select r; } else { results = from r in results orderby propertyName descending select r; } } return results; } public interface ISortOption<TModel, TProperty> where TModel : class { Expression<Func<TModel, TProperty>> Property { get; set; } bool IsAscending { get; set; } int Priority { get; set; } } I've not given you the implementation for MemberWithoutInstance() but just trust me in that it returns the name of the property as a string. :-) Following is an example of how I would consume this (using a non-interesting, basic implementation of ISortOption<TModel, TProperty>): var query = from b in CurrentContext.Businesses select b; var sortOptions = new List<ISortOption<Business, object>> { new SortOption<Business, object> { Property = (x => x.Name), IsAscending = true, Priority = 0 } }; var results = query.ApplySortOptions(sortOptions); As I discovered with this question, the problem is specific to my orderby propertyName ascending and orderby propertyName descending lines (everything else works great as far as I can tell). How can I do this in a dynamic/generic way that works properly?

    Read the article

  • Fluent | Nhibernate multiple inheritance mapping?

    - by Broken Pipe
    I'm trying to map this classes: public interface IBusinessObject { Guid Id { get; set; } } public class Product { public virtual Guid Id { get; set; } public virtual int ProductTypeId { get; set; } } public class ProductWeSell : Product, IBusinessObject { } public class ProductWeDontSell : Product { } Using this Fluent mapping code: public class IBusinessObjectMap : ClassMap<IBusinessObject> { public IBusinessObjectMap() { Id(t => t.Id).GeneratedBy.Guid(); Table("BusinessObject"); } } public class ProductMap : ClassMap<Product> { public ProductMap() { Id(t => t.Id); DiscriminateSubClassesOnColumn("ProductTypeId", "null").Nullable(); } } public class ProductWeSellMap : SubclassMap<ProductWeSell> { public ProductWeSellMap() { DiscriminatorValue(1); KeyColumn("Id"); } } public class ProductWeDontSellMap : SubclassMap<ProductWeDontSell> { public ProductWeDontSellMap() { DiscriminatorValue(2); KeyColumn("Id"); } } But I get {"Duplicate class/entity mapping ProductWeSell"} error. And if we take a look at generated HBM, indeed it's duplicated, but i have no idea how to write this mapping without duplicating it if it's possible at all. Produced hbm: <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2"> <class xmlns="urn:nhibernate-mapping-2.2" name="IBusinessObject" table="BusinessObject"> <joined-subclass name="ProductWeSell" table="ProductWeSell"/> </class> </hibernate-mapping> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2"> <class xmlns="urn:nhibernate-mapping-2.2" discriminator-value="null" name="Product" table="Product"> <discriminator type="String"> <column name="ProductTypeId" not-null="false" /> </discriminator> <subclass name="ProductWeDontSell" discriminator-value="2" /> <subclass name="ProductWeSell" discriminator-value="1" /> </class> </hibernate-mapping> So far I was unable to figure out how to map this using fluent Nhibernate (i haven't tried mapping this using hmb files). Any help appreciated Fluent or HBM files. The thing I'm trying to solve look identical to this topic: NHibernate inheritance mapping question

    Read the article

  • debugging JBoss 100% CPU usage

    - by NateS
    Originally posted on Server Fault, where it was suggested this question might better asked here. We are using JBoss to run two of our WARs. One is our web app, the other is our web service. The web app accesses a database on another machine and makes requests to the web service. The web service makes JMS requests to other machines, aggregates the data, and returns it. At our biggest client, about once a month the JBoss Java process takes 100% of all CPUs. The machine running JBoss has 8 CPUs. Our web app is still accessible during this time, however pages take about 3 minutes to load. Restarting JBoss restores everything to normal. The database machine and all the other machines are fine, only the machine running JBoss is affected. Memory usage is normal. Network utilization is normal. There are no suspect error messages in the JBoss logs. I have set up a test environment as close as possible to the client's production environment and I've done load testing with as much as 2x the number of concurrent users. I have not gotten my test environment to replicate the problem. Where do we go from here? How can we narrow down the problem? Currently the only plan we have is to wait until the problem occurs in production on its own, then do some debugging to determine the cause. So far people have just restarted JBoss when the problem occurred to minimize down time. Next time it happens they will get a developer to take a look. The question is, next time it happens, what can be done to determine the cause? We could setup a separate JBoss instance on the same box and install the web app separately from the web service. This way when the problem next occurs we will know which WAR has the problem (assuming it is our code). This doesn't narrow it down much though. Should I enable JMX remote? This way the next time the problem occurs I can connect with VisualVM and see which threads are taking the CPU and what the hell they are doing. However, is there a significant down side to enabling JMX remote in a production environment? Is there another way to see what threads are eating the CPU and to get a stacktrace to see what they are doing? Any other ideas? Thanks!

    Read the article

  • Storing a set of criteria in another table

    - by bendataclear
    I have a large table with sales data, useful data below: RowID Date Customer Salesperson Product_Type Manufacturer Quantity Value 1 01-06-2004 James Ian Taps Tap Ltd 200 £850 2 02-06-2004 Apple Fran Hats Hats Inc 30 £350 3 04-06-2004 James Lawrence Pencils ABC Ltd 2000 £980 ... Many rows later... ... 185352 03-09-2012 Apple Ian Washers Tap Ltd 600 £80 I need to calculate a large set of targets from table containing values different types, target table is under my control and so far is like: TargetID Year Month Salesperson Target_Type Quantity 1 2012 7 Ian 1 6000 2 2012 8 James 2 2000 3 2012 9 Ian 2 6500 At present I am working out target types using a view of the first table which has a lot of extra columns: SELECT YEAR(Date) , MONTH(Date) , Salesperson , Quantity , CASE WHEN Manufacturer IN ('Tap Ltd','Hats Inc') AND Product_Type = 'Hats' THEN True ELSE False END AS IsType1 , CASE WHEN Manufacturer = 'Hats Inc' AND Product_Type IN ('Hats','Coats') THEN True ELSE False END AS IsType2 ... ... , CASE WHEN Manufacturer IN ('Tap Ltd','Hats Inc') AND Product_Type = 'Hats' THEN True ELSE False END AS IsType24 , CASE WHEN Manufacturer IN ('Tap Ltd','Hats Inc') AND Product_Type = 'Hats' THEN True ELSE False END AS IsType25 FROM SalesTable WHERE [some stuff here] This is horrible to read/debug and I hate it!! I've tried a few different ways of simplifying this but have been unable to get it to work. The closest I have come is to have a third table holding the definition of the types with the values for each field and the type number, this can be joined to the tables to give me the full values but I can't work out a way to cope with multiple values for each field. Finally the question: Is there a standard way this can be done or an easier/neater method other than one column for each type of target? I know this is a complex problem so if anything is unclear please let me know. Edit - What I need to get: At the very end of the process I need to have targets displayed with actual sales: Type Year Month Salesperson TargetQty ActualQty 2 2012 8 James 2000 2809 2 2012 9 Ian 6500 6251 Each row of the sales table could potentially satisfy 8 of the types. Some more points: I have 5 different columns that need to be defined against the targets (or set to NULL to include any value) I have between 30 and 40 different types that need to be defined, several of the columns could contain as many as 10 different values For point 2, if I am using a row for each permutation of values, 2 columns with 10 values each would give me 100 rows for each sales person for each month which is a lot but if this is the only way to define multiple values I will have to do this. Sorry if this makes no sense!

    Read the article

  • ASP.NET MVC, Webform hybrid

    - by Greg Ogle
    We (me and my team) have a ASP.NET MVC application and we are integrating a page or two that are Web Forms. We are trying to reuse the Master Page from our MVC part of the app in the WebForms part. We have found a way of rendering an MVC partial view in web forms, which works great, until we try and do a postback, which is the reason for using a WebForm. The Error: Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster. The Code to render the partial view from a WebForm (credited to "How to include a partial view inside a webform"): public static class WebFormMVCUtil { public static void RenderPartial(string partialName, object model) { //get a wrapper for the legacy WebForm context var httpCtx = new HttpContextWrapper(System.Web.HttpContext.Current); //create a mock route that points to the empty controller var rt = new RouteData(); rt.Values.Add("controller", "WebFormController"); //create a controller context for the route and http context var ctx = new ControllerContext( new RequestContext(httpCtx, rt), new WebFormController()); //find the partial view using the viewengine var view = ViewEngines.Engines.FindPartialView(ctx, partialName).View; //create a view context and assign the model var vctx = new ViewContext(ctx, view, new ViewDataDictionary { Model = model }, new TempDataDictionary()); //ERROR OCCURS ON THIS LINE view.Render(vctx, System.Web.HttpContext.Current.Response.Output); } } My only experience with this error is in context of a web farm, which is not the case. Also, I understand that the machine key is used for decrypting the ViewState. Any information on how to diagnose this issue would be appreciated. A Work-around: So far the work-around is to move the header content to a PartialView, then use an AJAX call to call a page with just the Partial View from the WebForms, and then using the PartialView directly on the MVC Views. Also, we are still able to share non-tech-specific parts of the Master Page, i.e. anything that is not MVC specific. Still yet, this is not an ideal solution, a server-side solution is still desired. Also, this solutino has issues when working with controls that have more sophisticated controls, using JavaScript, particularly dynamically generated script as used by 3rd party controls.

    Read the article

  • SQL Function that calculates Shift from StartTime and EndTime

    - by Gentis
    Hello Folks I have been trying to get a function going that calculates what Shift the Employees worked from their StartTime and EndTime. Here is the code i have so far, there seems to be calculating the shift wrong. Shift 1 from 08:00:00 - 16:30:00 Shift 2 from 16:00:00 - 00:30:00 Shift 3 from 00:00:00 - 08:30:00 Also the shift with most hours wins for times between shifts. Thanks, G `FUNCTION [dbo].[ShiftDifferential] ( @StartTime time(0), @EndTime time(0) ) RETURNS int AS BEGIN --DECLARE @StartTime time(0) --DECLARE @EndTime time(0) -- Declare the return variable here DECLARE @Shift1StartTime time(0) DECLARE @Shift2StartTime time(0) DECLARE @Shift3StartTime time(0) DECLARE @Shift1EndTime time(0) DECLARE @Shift2EndTime time(0) DECLARE @Shift3EndTime time(0) DECLARE @HrsShift1 decimal(18,2) DECLARE @HrsShift2 decimal(18,2) DECLARE @HrsShift3 decimal(18,2) DECLARE @ShiftDiff int --SET @StartTime = '09:00:00' --SET @EndTime = '13:00:00' SET @Shift1StartTime = '08:00:00' SET @Shift2StartTime = '16:00:00' SET @Shift3StartTime = '00:00:00' SET @Shift1EndTime = '16:30:00' SET @Shift2EndTime = '00:30:00' SET @Shift3EndTime = '08:30:00' --SELECT DATEDIFF(HH, @Shift1StartTime, @EndTime) -- hours are between shift 3 and shift 1 if DATEDIFF(HH, @Shift1StartTime, @StartTime) < 0 AND (DATEDIFF(hh, @Shift1StartTime, @EndTime) < 8.0 AND DATEDIFF(hh, @Shift1StartTime, @EndTime) 0) begin --PRINT 'Shift 3-1 step1' SET @HrsShift3 = DATEDIFF(HH, @StartTime, @Shift1StartTime) SET @HrsShift1 = DATEDIFF(HH, @Shift1StartTime, @Endtime) --PRINT @HrsShift3 --PRINT @HrsShift1 -- get shift with most hours if @HrsShift3 @HrsShift1 begin SET @ShiftDiff = 3 end else begin SET @ShiftDiff = 1 end end -- hours are in shift 1 if (DATEDIFF(HH, @Shift1StartTime, @StartTime) = 0 AND DATEDIFF(HH, @Shift1StartTime, @EndTime) <= 8) OR (DATEDIFF(HH, @Shift1StartTime, @StartTime) 0 AND DATEDIFF(HH, @Shift1StartTime, @EndTime) <= 8) begin --PRINT 'Shift 1 step2' SET @HrsShift3 = 0 SET @HrsShift1 = DATEDIFF(HH, @StartTime, @EndTime) --PRINT @HrsShift3 --PRINT @HrsShift1 -- only one shift with hours SET @ShiftDiff = 1 end -- hours are between shift 1 and shift 2 if DATEDIFF(HH, @Shift2StartTime, @StartTime) < 0 and (DATEDIFF(HH, @Shift2StartTime, @EndTime) < 8.0 AND DATEDIFF(HH, @Shift2StartTime, @EndTime) 0) begin --PRINT 'Shift 1-2 step1' SET @HrsShift1 = DATEDIFF(HH, @StartTime, @Shift2StartTime) SET @HrsShift2 = DATEDIFF(HH, @Shift2StartTime, @Endtime) --PRINT @HrsShift1 --PRINT @HrsShift2 -- get the shift with most hours if @HrsShift1 @HrsShift2 begin SET @ShiftDiff = 1 end else begin SET @ShiftDiff = 2 end end -- hours are in shift 2 if (DATEDIFF(HH, @Shift2StartTime, @StartTime) = 0 AND DATEDIFF(HH, @Shift2StartTime, @EndTime) <= 8) OR (DATEDIFF(HH, @Shift2StartTime, @StartTime) 0 AND DATEDIFF(HH, @Shift2StartTime, @EndTime) <= 8) begin --PRINT 'Shift 2 step2' SET @HrsShift3 = 0 SET @HrsShift1 = DATEDIFF(HH, @StartTime, @EndTime) --PRINT @HrsShift3 --PRINT @HrsShift1 -- only one shift with hours SET @ShiftDiff = 2 end -- hours are between shift 2 and shift 3 - overnight shift if DATEDIFF(HH, @StartTime, @EndTime) < 0 begin --PRINT 'Shift 2-3 step1' SET @HrsShift2 = DATEDIFF(HH, @StartTime, '23:59:59') + DATEDIFF(HH, '00:00:00', '00:30:00') SET @HrsShift3 = DATEDIFF(HH, '00:30:00', @EndTime) --PRINT @HrsShift2 --PRINT @HrsShift3 -- get the shift with most hours if @HrsShift2 @HrsShift3 begin SET @ShiftDiff = 2 end else begin SET @ShiftDiff = 3 end end -- hours are in shift 3 if (DATEDIFF(HH, @Shift3StartTime, @StartTime) = 0 AND DATEDIFF(HH, @Shift3StartTime, @EndTime) <= 8) OR (DATEDIFF(HH, @Shift3StartTime, @StartTime) 0 AND DATEDIFF(HH, @Shift3StartTime, @EndTime) <= 8) begin --PRINT 'Shift 3 step2' SET @HrsShift2 = 0 SET @HrsShift3 = DATEDIFF(HH, @StartTime, @EndTime) --PRINT @HrsShift2 --PRINT @HrsShift3 -- only one shift with hours SET @ShiftDiff = 3 end RETURN @ShiftDiff; END`

    Read the article

  • Switching DataSources in ReportViewer in WinForms

    - by Mike Wills
    I have created a winform for the users to view view the many reports I am creating for them. I have a drop down list with the report name which triggers the appropriate fields to display the parameters. Once those are filled, they press Submit and the report appears. This works the first time they hit the screen. They can change the parameters and the ReportViewer works fine. Change to a different report, and the I get the following ReportViewer error: An error occurred during local report processing. An error has occurred during the report processing. A data source instance has not been supplied for the data source "CgTempData_BusMaintenance". As far as the process I use: I set reportName (string) the physical RDLC name. I set the dataSource (string) as the DataSource Name I fill a generic DataTable with the data for the report to run from. Make the ReportViewer visible Set the LocalReport.ReportPath = "Reports\\" = reportName; Clear the LocalReport.DataSources.Clear() Add the new LocalReport.DataSources.Add(new ReportDataSource(dataSource, dt)); RefreshReport() on the ReportViewer. Here is the portion of the code that setups up and displays the ReportViewer: /// <summary> /// Builds the report. /// </summary> private void BuildReport() { DataTable dt = null; ReportingCG rcg = new ReportingCG(); if (reportName == "GasUsedReport.rdlc") { dataSource = "CgTempData_FuelLog"; CgTempData.FuelLogDataTable DtFuelLog = rcg.BuildFuelUsedTable(fromDate, toDate); dt = DtFuelLog; } else if (reportName == "InventoryCost.rdlc") { CgTempData.InventoryUsedDataTable DtInventory; dataSource = "CgTempData_InventoryUsed"; DtInventory = rcg.BuildInventoryUsedTable(fromDate, toDate); dt = DtInventory; } else if (reportName == "VehicleMasterList.rdlc") { dataSource = "CgTempData_VehicleMaster"; CgTempData.VehicleMasterDataTable DtVehicleMaster = rcg.BuildVehicleMasterTable(); dt = DtVehicleMaster; } else if (reportName == "BusCosts.rdlc") { dataSource = "CgTempData_BusMaintenance"; dt = rcg.BuildBusCostsTable(fromDate, toDate); } // Setup the DataSource this.reportViewer1.Visible = true; this.reportViewer1.LocalReport.ReportPath = "Reports\\" + reportName; this.reportViewer1.LocalReport.DataSources.Clear(); this.reportViewer1.LocalReport.DataSources.Add(new ReportDataSource(dataSource, dt)); this.reportViewer1.RefreshReport(); } Any ideas how to remove all of the old remaining data? Do I dispose the object and recreate it?

    Read the article

  • Python, SWIG and other strange things

    - by wanderameise
    hey, I have a firmware for an USB module I can already control by visual C. Now I want to port this to python. for this I need the octopus library which is written in c. I found a file called octopus_wrap which was created by SWIG! then I found a makefile which says: python2.5: swig -python -outdir ./ ../octopus.i gcc -fPIC -c ../../liboctopus/src/octopus.c gcc -fPIC -c ../octopus_wrap.c -I /usr/include/python2.5 gcc -fPIC -shared octopus_wrap.o octopus.o /usr/lib/libusb.so -o _octopus.so python2.4: swig -python -outdir ./ ../octopus.i gcc -fPIC -c ../../liboctopus/src/octopus.c gcc -fPIC -c ../octopus_wrap.c -I /usr/include/python2.4 gcc -fPIC -shared octopus_wrap.o octopus.o /usr/lib/libusb.so -o _octopus.so win: gcc -fPIC -c ../../liboctopus/src/octopus.c -I /c/Programme/libusb-win32-device-bin-0.1.10.1/include gcc -fPIC -c octopus_wrap.c -I /c/Python25/libs -lpython25 -I/c/Python25/include -I /c/Programme/libusb-win32-device-bin-0.1.10.1/include gcc -fPIC -shared *.o -o _octopus.pyd -L/c/Python25/libs -lpython25 -lusb -L/c/Programme/libusb-win32-device-bin-0.1.10.1/lib/gcc clean: rm -f octopus* _octopus* install_python2.4: cp _octopus.so /usr/local/lib/python2.4/site-packages/ cp octopus.py /usr/local/lib/python2.4/site-packages/ install_python2.5: cp _octopus.so /usr/local/lib/python2.5/site-packages/ cp octopus.py /usr/local/lib/python2.5/site-packages/ I dont know how to handle this but as far as I can see octopus.py and _octopus.so are the resulting output files which are relevant to python right? luckily someone already did that and so I put those 2 files to my "python26/lib" folder (hope it doesnt matter if it´s python 2.5 or 2.6?!) So when working with the USB device the octopus.py is the library to work with! Importing this file makes several problems: >>> Traceback (most recent call last): File "C:\Users\ameise\My Dropbox\µC\AVR\OCTOPUS\octopususb-0.5\demos\python \blink_status.py", line 8, in <module> from octopus import * File "C:\Python26\lib\octopus.py", line 7, in <module> import _octopus ImportError: DLL load failed: module not found. and here´s the related line 7 : import _octopus So there´s a problem considering the .so file! What could be my next step? I know that´s a lot of confusing stuff but I hope anyone of you could bring some light in my mind! thy in advance

    Read the article

  • doofus ASP.Net master page scrollbar question

    - by Stephen Falken
    Like happens to all of us sometimes, I inherited some crappy code I have to fix. We need to center our pages on widescreen machines, so we have a master page layout div like so: .MasterLayout { width:1100px; height: 100%; position:absolute; left:50%; margin-left:-550px; vertical-align:top; } I removed most of the detailed attributes for readability here, but here's how the table for the master page is laid out: <table border="0" cellpadding="0" cellspacing="0" style="width: 100%;"> <tr> <td style="width: 100%" align="center" colspan="2"> </td> </tr> <tr> <td colspan="2" style="height: 20px; background-color: #333;"> <asp:SiteMapPath/> </td> </tr> <tr> <td style="width: 86px; height: 650px; background-color: #B5C7DE; margin: 6px;" valign="top"> <asp:Menu /> <asp:SiteMapDataSource /> </td> <td style="background-color:#ffffff; margin:5px; width:1000px;" valign="top"> <asp:contentplaceholder id="ContentPlaceHolder1" runat="server"/> </td> </tr> </table> When resizing the browser window, the horizontal scrollbar only reaches as far as the left edge of the <asp:contentplaceholder/> control, and the <asp:menu/> that's in the 86px wide <td> is hidden. How can I fix this problem? THANKS IN ADVANCE

    Read the article

  • Approaches to create a nested tree structure of NSDictionaries?

    - by d11wtq
    I'm parsing some input which produces a tree structure containing NSDictionary instances on the branches and NSString instance at the nodes. After parsing, the whole structure should be immutable. I feel like I'm jumping through hoops to create the structure and then make sure it's immutable when it's returned from my method. We can probably all relate to the input I'm parsing, since it's a query string from a URL. In a string like this: a=foo&b=bar&a=zip We expect a structure like this: NSDictionary { "a" => NSDictionary { 0 => "foo", 1 => "zip" }, "b" => "bar" } I'm keeping it just two-dimensional in this example for brevity, though in the real-world we sometimes see var[key1][key2]=value&var[key1][key3]=value2 type structures. The code hasn't evolved that far just yet. Currently I do this: - (NSDictionary *)parseQuery:(NSString *)queryString { NSMutableDictionary *params = [NSMutableDictionary dictionary]; NSArray *pairs = [queryString componentsSeparatedByString:@"&"]; for (NSString *pair in pairs) { NSRange eqRange = [pair rangeOfString:@"="]; NSString *key; id value; // If the parameter is a key without a specified value if (eqRange.location == NSNotFound) { key = [pair stringByReplacingPercentEscapesUsingEncoding:NSASCIIStringEncoding]; value = @""; } else { // Else determine both key and value key = [[pair substringToIndex:eqRange.location] stringByReplacingPercentEscapesUsingEncoding:NSASCIIStringEncoding]; if ([pair length] > eqRange.location + 1) { value = [[pair substringFromIndex:eqRange.location + 1] stringByReplacingPercentEscapesUsingEncoding:NSASCIIStringEncoding]; } else { value = @""; } } // Parameter already exists, it must be a dictionary if (nil != [params objectForKey:key]) { id existingValue = [params objectForKey:key]; if (![existingValue isKindOfClass:[NSDictionary class]]) { value = [NSDictionary dictionaryWithObjectsAndKeys:existingValue, [NSNumber numberWithInt:0], value, [NSNumber numberWithInt:1], nil]; } else { // FIXME: There must be a more elegant way to build a nested dictionary where the end result is immutable? NSMutableDictionary *newValue = [NSMutableDictionary dictionaryWithDictionary:existingValue]; [newValue setObject:value forKey:[NSNumber numberWithInt:[newValue count]]]; value = [NSDictionary dictionaryWithDictionary:newValue]; } } [params setObject:value forKey:key]; } return [NSDictionary dictionaryWithDictionary:params]; } If you look at the bit where I've added FIXME it feels awfully clumsy, pulling out the existing dictionary, creating an immutable version of it, adding the new value, then creating an immutable dictionary from that to set back in place. Expensive and unnecessary? I'm not sure if there are any Cocoa-specific design patterns I can follow here?

    Read the article

  • Android App to call a number on button click

    - by FosterZ
    hey guys this is my 1st android app(learning), so i want to call a number given in the textbox but i'm getting error as "The application 'xyz'(process com.adroid) has stoped unexpectedly".. following the code i have done so far... where m doing wrong ?? EditText txtPhn; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); Button callButton = (Button)findViewById(R.id.btnCall); txtPhn = (EditText)findViewById(R.id.txtPhnNumber); callButton.setOnClickListener(new OnClickListener() { public void onClick(View v) { try { Intent callIntent = new Intent(Intent.ACTION_CALL); callIntent.setData(Uri.parse("tel:"+txtPhn.getText().toString())); startActivity(callIntent); } catch (ActivityNotFoundException activityException) { Log.e("Calling a Phone Number", "Call failed", activityException); } } }); } EDITED LogCat 03-09 11:23:25.874: ERROR/AndroidRuntime(370): FATAL EXCEPTION: main 03-09 11:23:25.874: ERROR/AndroidRuntime(370): java.lang.SecurityException: Permission Denial: starting Intent { act=android.intent.action.CALL dat=tel:xxx-xxx-xxxx flg=0x10000000 cmp=com.android.phone/.OutgoingCallBroadcaster } from ProcessRecord{40738d70 370:org.krish.android/10034} (pid=370, uid=10034) requires android.permission.CALL_PHONE 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at android.os.Parcel.readException(Parcel.java:1322) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at android.os.Parcel.readException(Parcel.java:1276) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at android.app.ActivityManagerProxy.startActivity(ActivityManagerNative.java:1351) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at android.app.Instrumentation.execStartActivity(Instrumentation.java:1374) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at android.app.Activity.startActivityForResult(Activity.java:2827) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at android.app.Activity.startActivity(Activity.java:2933) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at org.krish.android.caller$1.onClick(caller.java:29) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at android.view.View.performClick(View.java:2485) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at android.view.View$PerformClick.run(View.java:9080) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at android.os.Handler.handleCallback(Handler.java:587) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at android.os.Handler.dispatchMessage(Handler.java:92) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at android.os.Looper.loop(Looper.java:123) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at android.app.ActivityThread.main(ActivityThread.java:3683) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at java.lang.reflect.Method.invokeNative(Native Method) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at java.lang.reflect.Method.invoke(Method.java:507) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 03-09 11:23:25.874: ERROR/AndroidRuntime(370): at dalvik.system.NativeStart.main(Native Method)

    Read the article

  • Properly setting up willSelectRowAtIndexPath and didSelectRowAtIndexPath to send cell selections

    - by Gordon Fontenot
    Feel like I'm going a bit nutty here. I have a detail view with a few stand-alone UITextFields, a few UITextFields in UITAbleViewCells, and one single UITableViewCell that will be used to hold notes, if there are any. I only want this cell selectable when I am in edit mode. When I am not in edit mode, I do not want to be able to select it. Selecting the cell (while in edit mode) will fire a method that will init a new view. I know this is very easy, but I am missing something somewhere. Here are the current selection methods I am using: -(NSIndexPath *)tableView:(UITableView *)tableView willSelectRowAtIndexPath:(NSIndexPath *)indexPath { if (!self.editing) { NSLog(@"Returning nil, not in edit mode"); return nil; } NSLog(@"Cell will be selected, not in edit mode"); if (indexPath.section == 0) { NSLog(@"Comments cell will be selected"); return indexPath; } return nil; } -(void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { if (!self.editing) { NSLog(@"Not in edit mode. Should not have made it this far."); return; } if (indexPath.section == 0) [self pushCommentsView]; else return; } My problem is really 2 fold; 1) Even when I'm not in edit mode, and I know I am returning nil (due to the NSLog message), I can still select the row (it flashes blue). From my understanding of the willSelectRowAtIndexPath method, this shouldn't be happening. Maybe I am wrong about this? 2) When I enter edit mode, I can't select anything at all. the willSelectRowAtIndexPath method never fires, and neither does the didSelectRowAtIndexPath. The only thing I am doing in the setEditing method, is hiding the back button while editing, and assigning firstResponder to the top textField to get the keyboard to pop up. I thought maybe the first responder was getting in the way of the click (which would be dumb), but even with that commented out, I cannot perform the cell selection during editing.

    Read the article

  • Updating Checked Checkboxes using CodeIgniter + MySQL

    - by Tim
    Hello I have about 8 check boxes that are being generated dynamically from my database. This is the code in my controller //Start Get Processes Query $this->db->select('*'); $this->db->from('projects_processes'); $this->db->where('process_enabled', '1'); $data['getprocesses'] = $this->db->get(); //End Get Processes Query //Start Get Checked Processes Query $this->db->select('*'); $this->db->from('projects_processes_reg'); $this->db->where('project_id', $project_id); $data['getchecked'] = $this->db->get(); //End Get Processes Query This is the code in my view. <?php if($getprocesses->result_array()) { ?> <?php foreach($getprocesses->result_array() as $getprocessrow): ?> <tr> <td><input <?php if($getchecked->result_array()) { foreach($getchecked->result_array() as $getcheckedrow): if($getprocessrow['process_id'] == $getcheckedrow['process_id']) { echo 'checked'; } endforeach; }?> type="checkbox" name="progresscheck[]" value="<?php echo $getprocessrow['process_id']; ?>"><?php echo $getprocessrow['process_name']; ?><br> </td> </tr> <?php endforeach; ?> This generates the checkboxes into the form and also checks the appropriate ones as specified by the database. The problem is updating them. What I have been doing so far is simply deleting all checkbox entries for the project and then re-inserting all the values into the database. This is bad because 1. It's slow and horrible. 2. I lose all my meta data of when the check boxes were checked. So I guess my question is, how do I update only the checkboxes that have been changed? Thanks, Tim

    Read the article

  • compile AMR-nb codec with RVCT for WinCE/Window Mobile

    - by pps
    Hello everybody, I'm working on amr speech codec (porting/optimization) I have an arm (for WinCE) optimized version from voiceage and I use it as a reference in performance testing. So far, binary produced with my lib beats the other one by around 20-30%! I use Vs2008 and I have limited access to ARM instruction set I can generate with Microsoft compiler. So I tried to look for alternative compiler to see what would be performance difference. I have RVCT compiler, but it produces elf binaries/object files. However, I run my test on a wince mobile phone (TyTn 2) so I need to find a way to run code compiled with RVCT on WinCE. Some of the options are 1) to produce assembly listing (-S option of armcc), and try to assemble with some other assembler that can create COFF (MS assembler for arm) 2) compile and convert generated ELF object file to COFF object (seems like objcopy of gnu binutils could help me with that) 3) using fromelf utility supplied by RVCT create BIN file and somehow try to mangle the bits so I can execute them ;) My first attempt is to create a simple c++ file with one exported function, compile it with RVCT and then try to run that function on the smartphone. The emitted assembly cannot be assembled by the ms assembler (not only they are not compatible, but also ms assembler rejects some of the instructions generated with RVCT compiler; ASR opcode in my case) Then I tried to convert ELF object to coff format and I can't find any information on that. There is a gcc port for ce and objcopy from that toolset is supposed to be able to do the task. However, I can't get it working. I tried different switches, but I have no idea what exactly I need to specify as bfdname for input and output format. So, I couldn't get it working either. Dumping with fromelf and using generated bin file seems to be overkill, so I decided to ask you guys if there is anything I should try to do or maybe someone has already done similar task and could help me. Basically, all I want to do is to compile my code with RVCT compiler and see what's the performance difference. My code has zero dependencies on any c runtime functions. thanks!

    Read the article

  • Advice on displaying and allowing editing of data using ASP.NET MVC?

    - by Remnant
    I am embarking upon my first ASP.NET MVC project and I would like to get some input on possible ways to display database data and general best practice. In short, the body of my webpage will show data from my database in a table like format, with each table row showing similar data. For example: Name Age Position Date Joined Jon Smith 23 Striker 18th Mar 2005 John Doe 38 Defender 3rd Jan 1988 In terms of functionality, primarily I’d like to give the user the ability to edit the data and, after the edit, commit the edit to the database and refresh the view.The reason I want to refresh the view is because the data is date ordered and I will need to re-sort if the user edits a date field. My main question is what architecture / tools would be best suited to this fulfil my requirements at a high level? From the research I have done so far my initial conclusions were: ADO.NET for data retrieval. This is something I have used before and feel comfortable with. I like the look of LINQ to SQL but don’t want to make the learning curve any steeper for my first outing into MVC land just yet. Partial Views to create a template and then iterate through a datatable that I have pulled back from my database model. jQuery to allow the user to edit data in the table, error check edited data entries etc. Also, my intial view was that caching the data would not be a key requirement here. The only field a user will be able to update is the field and, if they do, I will need to commit that data to the database immediately and then refresh the view (as the data is date sorted). Any thoughts on this? Alternatively, I have seen some jQuery plug-ins that emulate a datagrid and provide associated functionality. My first thoughts are that I do not need all the functionality that comes with these plug-ins (e.g. zebra striping, ability to sort by column using sort glyph in column headers etc .) and I don’t really see any benefit to this over and above the solution I have outlined above. Again, is there reason to reconsider this view? Finally, when a user edits a date , I will need to refresh the view. In order to do this I had been reading about Html.RenderAction and this seemed like it may be a better option than using Partial Views as I can incorporate application logic into the action method. Am I right to consider Html.RenderAction or have I misunderstood its usage? Hope this post is clear and not too long. I did consider separate posts for each topic (e.g. Partial View vs. Html.RenderAction, when to use jQury datagrid plug-in) but it feels like these issues are so intertwined that they need to be dealt with in contect of each other. Thanks

    Read the article

  • Does a nested subTable break reRender?

    - by Tom
    Here is a minimal rich:dataTable with an a4j:commandLink inside. When clicked it sends an AJAX request to my bean and reRenders the dataTable. <rich:dataTable id="dataTable" value="#{carManager.all}" var="item"> <rich:column> <f:facet name="header">name</f:facet> <h:outputText value="#{item.name}" /> </rich:column> <rich:column> <f:facet name="header">action</f:facet> <a4j:commandLink reRender="dataTable" value="Delete" action="#{carForm.delete}"> <f:setPropertyActionListener value="#{item.id}" target="#{carForm.id}" /> <f:param name="from" value="list" /> </a4j:commandLink> </rich:column> </rich:dataTable> The exmaple obove works fine so far. But when I add a rich:subTable to the table, reRendering fails... <rich:dataTable id="dataTable" value="#{garageManager.all}" var="garage"> <f:facet name="header"> <rich:columnGroup> <rich:column>name</rich:column> <rich:column>action</rich:column> </rich:columnGroup> </f:facet> <rich:column colspan="2"> <h:outputText value="#{garage.name}" /> </rich:column> <rich:subTable value="#{garage.cars}" var="car"> <rich:column><h:ouputText value="#{car.name}" /></rich:column> <rich:column> <a4j:commandLink reRender="dataTable" value="Delete" action="#{carForm.delete}"> <f:setPropertyActionListener value="#{item.id}" target="#{carForm.id}" /> <f:param name="from" value="list" /> </a4j:commandLink> </rich:column> </rich:column> </rich:dataTable> Now the rich:dataTable is not rerendered but the item gets deleted since the item does not show up after a complete page refresh. Why does subTable break support for reRender-ing the way i'd like to use it here? Tanks Tom

    Read the article

  • What am I missing about WCF?

    - by Bigtoe
    I've been developing in MS technologies for longer than I care to remember at this stage. When .NET arrived on the scene I thought they hit the nail on the head and with each iteration and version I thought their technologies were getting stronger and stronger and looked forward to each release. However, having had to work with WCF for the last year I must say I found the technology very difficult to work with and understand. Initially it's quite appealing but when you start getting into the guts of it, configuration is a nightmare, having to override behaviours for message sizes, number of objects contained in a messages, the complexity of the security model, disposing of proxies when faulted and finally moving back to defining interfaces in code rather than in XML. It just does not work out of the box and I think it should. We found all of the above issues while either testing ourselves or else when our products were out on site. I do understand the rationale behind it all, but surely they could have come up with simpler implementation mechanism. I suppose what I'm asking is, Am I looking at WCF the wrong way? What strengths does it have over the alternatives? Under what circumstances should I choose to use WCF? OK Folks, Sorry about the delay in responding, work does have a nasty habbit of get in the way somethimes :) Some clarifications My main paint point with WCF I suppose falls down into the following areas While it does work out of the box, your left with some major surprises under the hood. As pointed out above basic things are restricted until they are overridden Size of string than can be passed can't be over 8K Number of objects that can be passed in a single message is restricted Proxies not automatically recovering from failures The amount of configuration while it's there is a good thing, but understanding it all and what to use what and under which circumstances can be difficult to understand. Especially when deploying software on site with different security requirements etc. When talking about configuration, we've had to hide lots of ours in a back-end database because security and network people on-site were trying to change things in configuration files without understanding it. Keeping the configuration of the interfaces in code rather than moving to explicitly defined interfaces in XML, which can be published and consumed by almost anything. I know we can export the XML from the assembley, but it's full of rubbish and certain code generators choke on it. I know the world moves on, I've moved on a number of times over the last (ahem 22 years I've been developing) and am actively using WCF, so don't get me wrong, I do understand what it's for and where it's heading. I just think there should be simplier configuration/deployment options available, easier set-up and better management for configuration (SQL config provider maybe, rahter than just the web.config/app.config files). OK, back to the daily grid. Thanks for all your replies so far. Kind Regards Noel

    Read the article

  • Is Ogre's use of Exceptions a good way of using them?

    - by identitycrisisuk
    I've managed to get through my C++ game programming career so far virtually never touching exceptions but recently I've been working on a project with the Ogre engine and I'm trying to learn properly. I've found a lot of good questions and answers here on the general usage of C++ exceptions but I'd like to get some outside opinions from here on whether Ogre's usage is good and how best to work with them. To start with, quoting from Ogre's documentation of it's own Exception class: OGRE never uses return values to indicate errors. Instead, if an error occurs, an exception is thrown, and this is the object that encapsulates the detail of the problem. The application using OGRE should always ensure that the exceptions are caught, so all OGRE engine functions should occur within a try{} catch(Ogre::Exception& e) {} block. Really? Every single Ogre function could throw an exception and be wrapped in a try/catch block? At present this is handled in our usage of it by a try/catch in main that will show a message box with the exception description before exiting. This can be a bit awkward for debugging though as you don't get a stack trace, just the function that threw the error - more important is the function from our code that called the Ogre function. If it was an assert in Ogre code then it would go straight to the code in the debugger and I'd be able to find out what's going on much easier - I don't know if I'm missing something that would allow me to debug exceptions already? I'm starting to add a few more try/catch blocks in our code now, generally thinking about whether it matters if the Ogre function throws an exception. If it's something that will stop everything working then let the main try/catch handle it and exit the program. If it's not of great importance then catch it just after the function call and let the program continue. One recent example of this was building up a vector of the vertex/fragment program parameters for materials applied to an entity - if a material didn't have any parameters then it would throw an exception, which I caught and then ignored as it didn't need to add to my list of parameters. Does this seem like a reasonable way of dealing with things? Any specific advice for working with Ogre is much appreciated.

    Read the article

  • Beginner - C# iteration through directory to produce a file list

    - by dassouki
    The end goal is to have some form of a data structure that stores a hierarchal structure of a directory to be stored in a txt file. I'm using the following code and so far, and I'm struggling with combining dirs, subdirs, and files. /// <summary> /// code based on http://msdn.microsoft.com/en-us/library/bb513869.aspx /// </summary> /// <param name="strFolder"></param> public static void TraverseTree ( string strFolder ) { // Data structure to hold names of subfolders to be // examined for files. Stack<string> dirs = new Stack<string>( 20 ); if ( !System.IO.Directory.Exists( strFolder ) ) { throw new ArgumentException(); } dirs.Push( strFolder ); while ( dirs.Count > 0 ) { string currentDir = dirs.Pop(); string[] subDirs; try { subDirs = System.IO.Directory.GetDirectories( currentDir ); } catch ( UnauthorizedAccessException e ) { MessageBox.Show( "Error: " + e.Message ); continue; } catch ( System.IO.DirectoryNotFoundException e ) { MessageBox.Show( "Error: " + e.Message ); continue; } string[] files = null; try { files = System.IO.Directory.GetFiles( currentDir ); } catch ( UnauthorizedAccessException e ) { MessageBox.Show( "Error: " + e.Message ); continue; } catch ( System.IO.DirectoryNotFoundException e ) { MessageBox.Show( "Error: " + e.Message ); continue; } // Perform the required action on each file here. // Modify this block to perform your required task. /* foreach ( string file in files ) { try { // Perform whatever action is required in your scenario. System.IO.FileInfo fi = new System.IO.FileInfo( file ); Console.WriteLine( "{0}: {1}, {2}", fi.Name, fi.Length, fi.CreationTime ); } catch ( System.IO.FileNotFoundException e ) { // If file was deleted by a separate application // or thread since the call to TraverseTree() // then just continue. MessageBox.Show( "Error: " + e.Message ); continue; } } */ // Push the subdirectories onto the stack for traversal. // This could also be done before handing the files. foreach ( string str in subDirs ) dirs.Push( str ); foreach ( string str in files ) MessageBox.Show( str ); }

    Read the article

< Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >