Search Results

Search found 18475 results on 739 pages for 'non exist'.

Page 597/739 | < Previous Page | 593 594 595 596 597 598 599 600 601 602 603 604  | Next Page >

• Auto-resolving a hostname in WCF Metadata Publishing

  - by Mike C

  I am running a self-hosted WCF service. In the service configuration, I am using localhost in my BaseAddresses that I hook my endpoints to. When trying to connect to an endpoint using the WCF test client, I have no problem connecting to the endpoint and getting the metadata using the machine's name. The problem that I run into is that the client that is generated from metadata uses localhost in the endpoint URLs it wants to connect to. I'm assuming that this is because localhost is the endpoint URL published by metadata. As a result, any calls to the methods on the service will fail since localhost on the calling machine isn't running the service. What I would like to figure out is if it is possible for the service metadata to publish the proper URL to a client depending on the client who is calling it. For example, if I was requesting the service metadata from a machine on the same network as the server the endpoint should be net.tcp://MYSERVER:1234/MyEndpoint. If I was requesting it from a machine outside the network, the URL should be net.tcp://MYSERVER.mydomain.com:1234/MyEndpoint. And obviously if the client was on the same machine, THEN the URL could be net.tcp://localhost:1234/MyEndpoint. Is this just a flaw in the default IMetadataExchange contract? Is there some reason the metadata needs to publish the information in a non-contextual way? Is there another way I should be configuring my BaseAddresses in order to get the functionality I want? Thanks, Mike

  Read the article

• How can I work around WinXP using ports 1025-5000 as ephemeral?

  - by Chris Dolan

  If you create a TCP client socket with port 0 instead of a non-zero port, then the operating system chooses any free ephemeral port for you. Most OSes choose ephemeral ports from the IANA dynamic port range of 49152-65535. However in Windows Server 2003 and earlier (including XP) Microsoft used ports 1025-5000 as the ephemeral range, according to their bind() documentation. I run multiple Java services on the same hardware. On rare occasions, this range collides with well-known ports that I use for other services (e.g. port 4160 for Jini discovery). While rare, this has caused real problems. Is there any easy way to tell Windows or Java to use a different port range for client sockets? Microsoft's docs indicate that I can change the high end of that range via the MaxUserPort TcpIP registry setting, but I see no way to change the low end. Update: I've made some progress on this. It looks like Microsoft has a concept of reserved ports that are exceptions to the ephemeral port range. There's a registry setting that lets you change this permanently and apparently there must be an API to do the same thing because there's a data structure that holds high/low values for reserved port ranges, but I can't find the actual function call anywhere... The registry solution may work, but now I'm fixated on this API.

  Read the article

• Passing data between ViewControllers versus doing local Fetch in each VC

  - by Tofrizer

  Hi All, I'm developing an iPhone app using Core Data and I'm looking for some general advice and recommendations on whether its acceptable to pass data between ViewControllers versus doing a local fetch in each ViewController as you navigate to it. Ordinarily I would say it all depends on various factors (e.g. performance etc) but the passing data approach is so prevalent in my app and I'm spooked by all the stories about Apple rejecting apps because of not conforming to their standard guidelines. So let me put another way -- is it non-standard to pass data between VC's? The reason I pass data so much is because each ViewController is just another view on to data present in my object model / graph. Once I have a handle on my first object in the first view controller (which I of course do have to fetch), I can use the existing object composition / relationships to drill down into the next level of detail into data and so I just pass these objects to the next VC. Separately, one possible downside with this passing-data-to-each-VC approach is I don't benefit from (what I perceive to be) the optimisation/benefits that NSFetchedResultsController provides in terms of efficient memory usage and section handling. My app is read-only but I do have one table with 5000 rows and I'm curious if I am missing out on NSFetchedResultsController benefits. Any thoughts on this as well? Can I somehow still benefit from NSFetchedResultsController goodness without having to do a full fetch (as I would have already passed in the data from my previous VC)? Thanks a lot.

  Read the article

• Curve fitting: Find a CDF (or any function) that satisfies a list of constraints.

  - by dreeves

  I have some constraints on a CDF in the form of a list of x-values and for each x-value, a pair of y-values that the CDF must lie between. We can represent that as a list of {x,y1,y2} triples such as constraints = {{0, 0, 0}, {1, 0.00311936, 0.00416369}, {2, 0.0847077, 0.109064}, {3, 0.272142, 0.354692}, {4, 0.53198, 0.646113}, {5, 0.623413, 0.743102}, {6, 0.744714, 0.905966}} Graphically that looks like this: And since this is a CDF there's an additional implicit constraint of {Infinity, 1, 1} Ie, the function must never exceed 1. Also, it must be monotone. Now, without making any assumptions about its functional form, we want to find a curve that respects those constraints. For example: (I cheated to get that one: I actually started with a nice log-normal distribution and then generated fake constraints based on it.) One possibility is a straight interpolation through the midpoints of the constraints: mids = ({#1, Mean[{#2,#3}]}&) @@@ constraints f = Interpolation[mids, InterpolationOrder->0] Plotted, f looks like this: That sort of technically satisfies the constraints but it needs smoothing. We can increase the interpolation order but now it violates the implicit constraints (always less than one, and monotone): How can I get a curve that looks as much like the first one above as possible? Note that NonLinearModelFit with a LogNormalDistribution will do the trick in this example but is insufficiently general as sometimes there will sometimes not exist a log-normal distribution satisfying the constraints.

  Read the article

• Standard Android Button with a different color

  - by Mike

  I'd like to change the color of a standard Android button slightly in order to better match a client's branding. For example, see the "Find a Table" button for the OpenTable application: The best way I've found to do this so far is to change the Button's drawable to the following drawable located in res/drawable/red_button.xml: <?xml version="1.0" encoding="utf-8"?> <selector xmlns:android="http://schemas.android.com/apk/res/android"> <item android:state_pressed="true" android:drawable="@drawable/red_button_pressed" /> <item android:state_focused="true" android:drawable="@drawable/red_button_focus" /> <item android:drawable="@drawable/red_button_rest" /> </selector> But doing that requires that I actually create three different drawables for each button I want to customize (one for the button at rest, one when focused, and one when pressed). That seems more complicated and non-DRY than I need. All I really want to do is apply some sort of color transform to the button. Is there an easier way to go about changing a button's color than I'm doing?

  Read the article

• ASP.NET:Paging when deleting rows

  - by Niels Bosma

  I have a datagrid where a row can be deleted (using ajax). I'm have problem with the pager in the following scenario: Lets say my PageSize is 10, I have 101 rows so that's 11 pages with the last page with an single element. Let no assume that I'm on page 10 (PageIndex=9) and delete a row. Then I go to the 11'th page (who's now empty and doesn't really exist). ASP now shows me the EmptyDataTemplate and no pager so I can't go back. My approach (which isn't working) is to detect this scenario and step one page back: public void Bind() { gridMain.DataBind(); } public void SetPage(int page) { gridMain.PageIndex = page; gridMain.DataBind(); } protected void ldsGridMain_Selecting(object sender, LinqDataSourceSelectEventArgs e) { selectArgs = e; e.Result = (new EnquiryListController()).GetEnquiryList(OnBind(this), supplier); } protected void ldsGridMain_Selected(object sender, LinqDataSourceStatusEventArgs e) { totalRows = selectArgs.Arguments.TotalRowCount; //Detect if we need to update the page: if (gridMain.PageIndex > 0 && (gridMain.PageSize * gridMain.PageIndex + 1) > totalRows) SetPage(gridMain.PageIndex - 1); } protected void gridMain_PageIndexChanging(object sender, GridViewPageEventArgs e) { SetPage(e.NewPageIndex); } I can see that SetPage is called with the the right page index, but the databind doesn't seem to called as I still get the EmptyDataTemplate.

  Read the article

• Quitting an application - is that frowned upon?

  - by Ted

  Moving on in my attempt to learn Android I just read the following: Question: Does the user have a choice to kill the application unless we put a menu option in to kill it? If no such option exists, how does the user terminate the application? Answert (Romain Guy): The user doesn't, the system handles this automatically. That's what the activity lifecycle (especially onPause/onStop/onDestroy) is for. No matter what you do, do not put a "quit" or "exit" application button. It is useless with Android's application model. This is also contrary to how core applications work. Hehe, for every step I take in the Android world I run into some sort of problem =( Apparently, you cannot quit an application in Android (but Android can very well totally destroy your app whenever it feels like it). Whats up with that? I am starting to think that its impossible to write an app that functions as a "normal app" - that the user can quit the app when he/she decides to do so. That is not something that should be relied upon the OS to do. The application I am trying to create is not an application for the Android Market. It is not an application for "wide use" by the general public, it is a business app that is going to be used in a very narrow business field. I was actually really looking forward to developing for the Android-platform, since it addresses a lot of issues that exist in Windows Mobile and .NET. However, the last week has been somewhat of a turnoff for me... I hope I dont have to abandon Android, but it doesnt look very good right now =( Is there a way for me to really quit the application?

  Read the article

• CSS Width Greater then Page Width without Horizontal Scroll (overflow:hidden not an option)

  - by Anders H

  I've got a basic layout going in 960.gs. One line of text is absolutely positioned, starting within an inner DIV and exiting only the right side of the page. Here's a screenshot: The issue is that as the text appears as a series of unbroken words, if the width of the text box doesn't extend beyond the end of the page, it breaks some distance from the edge. overflow: hidden; doesn't do the trick because I need to set the width wider than the page. float won't work because the text can't escape the width of the inner DIV. I can't set it outside the inner DIV and just position it there as the same problem will still exist. The code is basically as simple as: <wrapper (containing) DIV> <text stripe DIV> <p></p> </text stripe DIV> </ wrapper DIV> I know I've done something like this before and I can't for the life of me remember what I ended up doing. Thanks.

  Read the article

• Hierarchical object model with property inheritance and event bubbling?

  - by Winston Fassett

  I'm writing a document-based client application and I need a DOM or WPF-like, but non-visual model that: Is a tree composed of elements Can accept an unlimited number of custom properties that get/set any CLR type, including collections. Can inherit their values from their parent Can inherit their default values from an ancestor Can be derived/calculated from other properties, ancestors, or descendants Support event bubbling / tunneling There will be a core set of properties but other plugins may add their own or even create custom documents Supports full inspection by the owning document in order to persist the tree and attributes in an XML format. I realize that's a tall order but I was really hoping there would be something out there to help me get started. Unfortunately WPF DependencyObjects are too closed, proprietary, and coupled to WPF to be of any use as a document model. My needs also have a strong resemblance to the HTML DOM but I haven't been able to find any clean DOM implementations that could be decoupled from HTML or ported to .NET. My current platform is .NET/C# but if anyone knows of anything that might be useful for inspiration or embedding, regardless of the platform, I'd love to know.

  Read the article

• Recognize Dates In A String

  - by Tim Scott

  I want a class something like this: public interface IDateRecognizer { DateTime[] Recognize(string s); } The dates might exist anywhere in the string and might be any format. For now, I could limit to U.S. culture formats. The dates would not be delimited in any way. They might have arbitrary amounts of whitespace between parts of the date. The ideas I have are: ANTLR Regex Hand rolled I have never used ANTLR, so I would be learning from scratch. I wonder if there are libraries or code samples out there that do something similar that could jump start me. Is ANTLR too heavy for such a narrow use? I have used Regex a lot before, but I hate it for all the reasons that most people hate it. I could certainly hand roll it but I'd rather not re-solve a solved problem. Suggestions? UPDATE: Here is an example. Given this input: This is a date 11/3/63. Here is another one: November 03, 1963; and another one Nov 03, 63 and some more (11/03/1963). The dates could be in any U.S. format. They might have dashes like 11-2-1963 or weird extra whitespace inside like this: Nov   3,   1963, and even maybe the comma is missing like [Nov 3 63] but that's an edge case. The output should be an array of seven DateTimes. Each date would be the same: 11/03/1963 00:00:00.

  Read the article

• Can I use POSIX signals in my Perl program to create event-driven programming?

  - by Shiftbit

  Is there any POSIX signals that I could utilize in my Perl program to create event-driven programming? Currently, I have multi-process program that is able to cross communicate but my parent thread is only able to listen to listen at one child at a time. foreach (@proc) { sysread(${$_}{'read'}, my $line, 100); #problem here chomp($line); print "Parent hears: $line\n"; } The problem is that the parent sits in a continual wait state until it receives it a signal from the first child before it can continue on. I am relying on 'pipe' for my intercommunication. My current solution is very similar to: http://stackoverflow.com/questions/2558098/how-can-i-use-pipe-to-facilitate-interprocess-communication-in-perl If possible I would like to rely on a $SIG{...} event or any non-CPAN solution. Update: As Jonathan Leffler mentioned, kill can be used to send a signal: kill USR1 = $$; # send myself a SIGUSR1 My solution will be to send a USR1 signal to my child process. This event tells the parent to listen to the particular child. child: kill USR1 => $parentPID if($customEvent); syswrite($parentPipe, $msg, $buffer); #select $parentPipe; print $parentPipe $msg; parent: $SIG{USR1} = { #get child pid? sysread($array[$pid]{'childPipe'}, $msg, $buffer); }; But how do I get my the source/child pid that signaled the parent? Have the child Identify itself in its message. What happens if two children signal USR1 at the same time?

  Read the article

• Association and model data saving problem

  - by Zhlobopotam

  Developing with cakephp 1.3 (latest from github). There are 2 models bind with hasAndBelongsToMany: documents and tags. Document can have many tags in other words. I've add a new document submitting form there user can enter a list of tags separated with commas (new tag will be added, if not exist already). I looked at cakephp bakery 2.0 source code on github and found the solution. But it seems that something is wrong. class Document extends AppModel { public $hasAndBelongsToMany = array('Tag'); public function beforeSave($options = array()) { if (isset($this->data[$this->alias]['tags']) && !empty($this- >data[$this->alias]['tags'])) { $tagIds = $this->Tag->saveDocTags($this->data[$this->alias] ['tags']); unset($this->data[$this->alias]['tags']); $this->data[$this->Tag->alias][$this->Tag->alias] = $tagIds; } return true; } } class Tag extends AppModel { public $hasAndBelongsToMany = array ('Document'); public function saveDocTags($commalist = '') { if ($commalist == '') return null; $tags = explode(',',$commalist); if (empty($tags)) return null; $existing = $this->find('all', array( 'conditions' => array('title' => $tags) )); $return = Set::extract($existing,'/Tag/id'); if (sizeof($existing) == sizeof($tags)) { return $return; } $existing = Set::extract($existing,'/Tag/title'); foreach ($tags as $tag) { if (!in_array($tag, $existing)) { $this->create(array('title' => $tag)); $this->save(); $return[] = $this->id; } } return $return; } } So, new tags creation works well but document model can't save association data and tells: SQL Error: 1054: Unknown column 'Array' in 'field list' Query: INSERT INTO documents (title, content, shortnfo, date, status) VALUES ('Document with tags', '', '', Array, 1) Any ideas how to solve this problem?

  Read the article

• Generating Random Records Date Wise

  - by Julian

  I work for a non-profit organization where we send volunteers to aided schools everyday. I am creating a site to display this info and am using SQL server express. I want some help regarding a query so here's my first post We have 15 volunteers currently who will go to 4 different schools to teach. Here are some conditions: We have to create a 'new' group comprising of 1 Leader and 4 TeamSupporters 'every day' except Sunday who will go to teach everyday If a person becomes a Leader in a week, he cannot become a leader again for the same week. A leader can become a TeamSupporter in the same week. Moving ahead, we can have more number of school to target, so 4 is not a constant Here's how the output should look like School1 School2 School3 School4 Jun14 Leader V6 V6 V6 V6 Support1 V3 V3 V3 V3 Support2 V9 V9 V9 V9 Support3 V12 V12 V12 V12 Support4 V1 V1 V1 V1 Jun15 Leader V2 V2 V2 V2 Support1 V7 V7 V7 V7 Support2 V9 V9 V9 V9 Support3 V8 V8 V8 V8 Support4 V11 V11 V11 V11 Jun16 Leader V9 V9 V9 V9 Support1 V6 V6 V6 V6 Support2 V4 V4 V4 V4 Support3 V3 V3 V3 V3 Support4 V14 V14 V14 V14 and so on..

  Read the article

• Winsock tcp/ip Socket listening but connection refused, race condition?

  - by Wayne

  Hello folks. This involves two automated unit tests which each start up a tcp/ip server that creates a non-blocking socket then bind()s and listen()s in a loop on select() for a client that connects and downloads some data. The catch is that they work perfectly when run separately but when run as a test suite, the second test client will fail to connect with WSACONNREFUSED... UNLESS there is a Thread.Sleep() of several seconds between them??!!! Interestingly, there is retry loop every 1 second for connecting after any failure. So the second test loops for a while until timeout after 10 minutes. During that time, netstat -na shows the correct port number is in the LISTEN state for the server socket. So if it is in the listen state? Why won't it accept the connection? In the code, there are log messages that show the select NEVER even gets a socket ready to read (which means ready to accept a connection when it applies to a listening socket). Obviously the problem must be related to some race condition between finishing one test which means close() and shutdown() on each end of the socket, and the start up of the next. This wouldn't be so bad if the retry logic allowed it to connect eventually after a couple of seconds. However it seems to get "gummed up" and won't even retry. However, for some strange reason the listening socket SAYS it's in the LISTEN state even through keeps refusing connections. So that means it's the Windoze O/S which is actually catching the SYN packet and returning a RST packet (which means "Connection Refused"). The only other time I ever saw this error was when the code had a problem that caused hundreds of sockets to get stuck in TIME_WAIT state. But that's not the case here. netstat shows only about a dozen sockets with only 1 or 2 in TIME_WAIT at any given moment. Please help.

  Read the article

• Assigning console.log to another object (Safari issue)

  - by Trevor Burnham

  I wanted to keep my logging statements as short as possible while preventing console from being accessed when it doesn't exist; I came up with the following solution: var _ = {}; if (console) { _.log = console.debug; } else { _.log = function() { } } To me, this seems quite elegant, and it works great in Firefox 3.6 (including preserving the line numbers that make console.debug more useful than console.log). But it doesn't work in Safari 4. (Haven't tested in other browsers yet.) If I follow the above with console.debug('A') _.log('B'); the first statement works fine in both browsers, but the second generates a "TypeError: Type Error" in Safari. Is this just a difference between how Firebug and the Safari Web Developer Tools implement console? If so, it is VERY annoying on Apple's part. (I get the same results in both browsers if I bind the console function to a prototype and then instantiate, rather than binding it directly to the object.) I could, of course, just call console.debug from an anonymous function assigned to _.log, but then I'd lose my line numbers. Any other ideas?

  Read the article

• Updating a specific key/value inside of an array field with MongoDB

  - by Jesta

  As a preface, I've been working with MongoDB for about a week now, so this may turn out to be a pretty simple answer. I have data already stored in my collection, we will call this collection content, as it contains articles, news, etc. Each of these articles contains another array called author which has all of the author's information (Address, Phone, Title, etc). The Goal - I am trying to create a query that will update the author's address on every article that the specific author exists in, and only the specified author block (not others that exist within the array). Sort of a "Global Update" to a specific article that affects his/her information on every piece of content that exists. Here is an example of what the content with the author looks like. { "_id" : ObjectId("4c1a5a948ead0e4d09010000"), "authors" : [ { "user_id" : null, "slug" : "joe-somebody", "display_name" : "Joe Somebody", "display_title" : "Contributing Writer", "display_company_name" : null, "email" : null, "phone" : null, "fax" : null, "address" : null, "address2" : null, "city" : null, "state" : null, "zip" : null, "country" : null, "image" : null, "url" : null, "blurb" : null }, { "user_id" : null, "slug" : "jane-somebody", "display_name" : "Jane Somebody", "display_title" : "Editor", "display_company_name" : null, "email" : null, "phone" : null, "fax" : null, "address" : null, "address2" : null, "city" : null, "state" : null, "zip" : null, "country" : null, "image" : null, "url" : null, "blurb" : null }, ], "tags" : [ "tag1", "tag2", "tag3" ], "title" : "Title of the Article" } I can find every article that this author has created by running the following command: db.content.find({authors: {$elemMatch: {slug: 'joe-somebody'}}}); So theoretically I should be able to update the authors record for the slug joe-somebody but not jane-somebody (the 2nd author), I am just unsure exactly how you reach in and update every record for that author. I thought I was on the right track, and here's what I've tried. b.content.update( {authors: {$elemMatch: {slug: 'joe-somebody'} } }, {$set: {address: '1234 Avenue Rd.'} }, false, true ); I just believe there's something I am missing in the $set statement to specify the correct author and point inside of the correct array. Any ideas? **Update** I've also tried this now: b.content.update( {authors: {$elemMatch: {slug: 'joe-somebody'} } }, {$set: {'authors.$.address': '1234 Avenue Rd.'} }, false, true );

  Read the article

• Check for modification failure in content Integration using visualSvn sever and cruise control.net

  - by harun123

  I am using CruiseControl.net for continous integration. I've created a repository for my project using VisualSvn server (uses Windows Authentication). Both the servers are hosted in the same system (Os-Microsoft Windows Server 2003 sp2). When i force build the project using CruiseControl.net "Failed task(s): Svn: CheckForModifications" is shown as the message. When i checked the build report, it says as follows: BUILD EXCEPTION Error Message: ThoughtWorks.CruiseControl.Core.CruiseControlException: Source control operation failed: svn: OPTIONS of 'https://sp-ci.sbsnetwork.local:8443/svn/IntranetPortal/Source': **Server certificate verification failed: issuer is not trusted** (https://sp-ci.sbsnetwork.local:8443). Process command: C:\Program Files\VisualSVN Server\bin\svn.exe log **sameUrlAbove** -r "{2010-04-29T08:35:26Z}:{2010-04-29T09:04:02Z}" --verbose --xml --username ccnetadmin --password cruise --non-interactive --no-auth-cache at ThoughtWorks.CruiseControl.Core.Sourcecontrol.ProcessSourceControl.Execute(ProcessInfo processInfo) at ThoughtWorks.CruiseControl.Core.Sourcecontrol.Svn.GetModifications (IIntegrationResult from, IIntegrationResult to) at ThoughtWorks.CruiseControl.Core.Sourcecontrol.QuietPeriod.GetModifications(ISourceControl sourceControl, IIntegrationResult lastBuild, IIntegrationResult thisBuild) at ThoughtWorks.CruiseControl.Core.IntegrationRunner.GetModifications(IIntegrationResult from, IIntegrationResult to) at ThoughtWorks.CruiseControl.Core.IntegrationRunner.Integrate(IntegrationRequest request) My SourceControl node in the ccnet.config is as shown below: <sourcecontrol type="svn"> <executable>C:\Program Files\VisualSVN Server\bin\svn.exe</executable> <trunkUrl> check out url </trunkUrl> <workingDirectory> C:\ProjectWorkingDirectories\IntranetPortal\Source </workingDirectory> <username> ccnetadmin </username> <password> cruise </password> </sourcecontrol> Can any one suggest how to avoid this error?

  Read the article

• How to convert from hex-encoded string to a "human readable" string?

  - by John Jensen

  I'm using the Net-SNMP bindings for python and I'm attempting to grab an ARP cache from a Brocade switch. Here's what my code looks like: #!/usr/bin/env python import netsnmp def get_arp(): oid = netsnmp.VarList(netsnmp.Varbind('ipNetToMediaPhysAddress')) res = netsnmp.snmpwalk(oid, Version=2, DestHost='10.0.1.243', Community='public') return res arp_table = get_arp() print arp_table The SNMP code itself is working fine. Output from snmpwalk looks like this: <snip> IP-MIB::ipNetToMediaPhysAddress.128.10.200.6.158 = STRING: 0:1b:ed:a3:ec:c1 IP-MIB::ipNetToMediaPhysAddress.129.10.200.6.162 = STRING: 0:1b:ed:a4:ac:c1 IP-MIB::ipNetToMediaPhysAddress.130.10.200.6.166 = STRING: 0:1b:ed:38:24:1 IP-MIB::ipNetToMediaPhysAddress.131.10.200.6.170 = STRING: 74:8e:f8:62:84:1 </snip> But my output from the python script yields a tuple of hex-encoded strings that looks like this: ('\x00$8C\x98\xc1', '\x00\x1b\xed;_A', '\x00\x1b\xed\xb4\x8f\x81', '\x00$86\x15\x81', '\x00$8C\x98\x81', '\x00\x1b\xed\x9f\xadA', ...etc) I've spent some time googling and came across the struct module and the .decode("hex") string method, but the .decode("hex") method doesn't seem to work: Python 2.7.3 (default, Apr 10 2013, 06:20:15) [GCC 4.6.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> hexstring = '\x00$8C\x98\xc1' >>> newstring = hexstring.decode("hex") Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib/python2.7/encodings/hex_codec.py", line 42, in hex_decode output = binascii.a2b_hex(input) TypeError: Non-hexadecimal digit found >>> And the documentation for struct is a bit over my head.

  Read the article

• accumulator don't compile

  - by Abruzzo Forte e Gentile

  HI All I am using boost accumulators. These 2 lines use to work fine with current version of boost in LInux. accumulator_set< double, stats< tag::covariance<double, tag::covariate1> > > acc_cov; accumulator_set< double, stats< tag::variance > > acc_var; When I moved to a Sun machine where it is installed boost v1.40 I have this building error "/opt/boost/boost/accumulators/framework/depends_on.hpp", line 276: Error:<no tag> cannot be initialized in a constructor. "/opt/boost/boost/fusion/container/list/cons.hpp", line 85: Where: While instantiating "boost::accumulators::detail::accumulator_wrapper<int, int>::accumulator_wrapper(const boost::accumulators::detail::accumulator_wrapper<int, int>&)". "/opt/boost/boost/fusion/container/list/cons.hpp", line 85: Where: Instantiated from non-template code. 1 Error(s) Do you know how can I fix those errors and why I have this issue? Thanks AFG

  Read the article

• Maven build fails on an Ant FTP task failure

  - by fraido

  I'm using the FTP Ant task with maven-antrun-plugin <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-antrun-plugin</artifactId> <executions> <execution> <id>ftp</id> <phase>generate-resources</phase> <configuration> <tasks> <ftp action="get" server="${ftp.server.ip}" userid="${ftp.server.userid}" password="${ftp.server.password}" remotedir="${ftp.server.remotedir}" depends="yes" verbose="yes" skipFailedTransfers="true" ignoreNoncriticalErrors="true"> <fileset dir="target/test-classes/testdata"> <include name="**/*.html" /> </fileset> </ftp> </tasks> </configuration> <goals> <goal>run</goal> </goals> </execution> </executions> ... the problem is that my build fails when the folder ${ftp.server.remotedir} doesn't exist. I tried to specify skipFailedTransfers="true" ignoreNoncriticalErrors="true but these don't fix the problem and the build keeps failing. An Ant BuildException has occured: could not change remote directory: 550 /myBadDir: The system cannot find the file specified. Do you know how to instruct my maven build to don't care about this Ant task error

  Read the article

• OpenGL particle system

  - by allan

  I'm really new with OpenGL, so bear with me. I'm trying to simulate a particle system using OpenGl but I can't get it to work, this is what I have so far: #include <GL/glut.h> int main (int argc, char **argv){ // data allocation, various non opengl stuff ............ glutInit(&argc, argv); glutInitDisplayMode(GLUT_RGB | GLUT_DOUBLE ); glutInitWindowPosition(100,100); glutInitWindowSize(size, size); glPointSize (4); glutCreateWindow("test gl"); ............ // initial state, not opengl ............ glViewport(0,0,size,size); glutDisplayFunc(display); glutIdleFunc(compute); glutMainLoop(); } void compute (void) { // change state not opengl glutPostRedisplay(); } void display (void) { glClear(GL_COLOR_BUFFER_BIT); glBegin(GL_POINTS); for(i = 0; i<nparticles; i++) { // two types of particles if (TYPE(particle[i]) == 1) glColor3f(1,0,0); else glColor3f(0,0,1); glVertex2f(X(particle[i]),Y(particle[i])); } glEnd(); glFlush(); glutSwapBuffers(); } I get a black window after a couple of seconds (the window has just the title bar before that). Where do I go wrong? Any help would be very much appreciated. Thanks. LE: the x and y coordinates of each particle are within the interval (0,size)

  Read the article

• Creating an SQL variable character column > 255 characters supporting multiple databases

  - by Piers

  I have an application that stores data through an ODBC data source of the user's choosing. So far it has worked well on a range of database systems (e.g. JET, Oracle, SQL Server), as the SQL syntax is fairly simple. Now I am running into a problem where I need to store more than 255 characters in my strings. Previously I created the table using column type VARCHAR (255). Now if I try to create a table using, e.g. VARCHAR (512) then it falls over on Access databases. I know that I can use the MEMO type for Access, but this is non-standard SQL and will thus likely fail on other database systems (e.g. Oracle). Is there any widely supported SQL standard for creating text columns wider than 255 characters, or do I need to find another solution? The alternatives seem to me to be: 1) Profile the database system and customise the SQL CREATE TABLE command based on the database system. I don't like this as it defeats the purpose of using ODBC. 2) Add extra columns of 255 chars as required (e.g. LONGSTRING1, LONGSTRING2, ...) and concatenate after reading. I don't like this because it means the number of columns can vary between tables and it complicates read/write. Are there any other viable alternatives to these two options? Or is it possible to have an SQL compliant CREATE TABLE command supported by the majority of database vendors, that supports strings longer than 255 chars?

  Read the article

• How to provide js-ctypes in a spidermonkey embedding?

  - by Triston J. Taylor

  Summary I have looked over the code the SpiderMonkey 'shell' application uses to create the ctypes JavaScript object, but I'm a less-than novice C programmer. Due to the varying levels of insanity emitted by modern build systems, I can't seem to track down the code or command that actually links a program with the desired functionality. method.madness This js-ctypes implementation by The Mozilla Devs is an awesome addition. Since its conception, scripting has been primarily used to exert control over more rigorous and robust applications. The advent of js-ctypes to the SpiderMonkey project, enables JavaScript to stand up and be counted as a full fledged object oriented rapid application development language flying high above 'the bar' set by various venerable application development languages such as Microsoft's VB6. Shall we begin? I built SpiderMonkey with this config: ./configure --enable-ctypes --with-system-nspr followed by successful execution of: make && make install The js shell works fine and a global ctypes javascript object was verified operational in that shell. Working with code taken from the first source listing at How to embed the JavaScript Engine -MDN, I made an attempt to instantiate the JavaScript ctypes object by inserting the following code at line 66: /* Populate the global object with the ctypes object. */ if (!JS_InitCTypesClass(cx, global)) return NULL; /* I compiled with: g++ $(./js-config --cflags --libs) hello.cpp -o hello It compiles with a few warnings: hello.cpp: In function ‘int main(int, const char**)’: hello.cpp:69:16: warning: converting to non-pointer type ‘int’ from NULL [-Wconversion-null] hello.cpp:80:20: warning: deprecated conversion from string constant to ‘char*’ [-Wwrite-strings] hello.cpp:89:17: warning: NULL used in arithmetic [-Wpointer-arith] But when you run the application: ./hello: symbol lookup error: ./hello: undefined symbol: JS_InitCTypesClass Moreover JS_InitCTypesClass is declared extern in 'dist/include/jsapi.h', but the function resides in 'ctypes/CTypes.cpp' which includes its own header 'CTypes.h' and is compiled at some point by some command during 'make' to yeild './CTypes.o'. As I stated earlier, I am less than a novice with the C code, and I really have no idea what to do here. Please give or give direction to a generic example of making the js-ctypes object functional in an embedding.

  Read the article

• Maven compile plugin

  - by phanikiran

  Hi every body, in pom of a project, i have added dependency with scope compile . which is a jar file which contains some class file and jar's as well. my current java file needs internal jars of dependent jar to compile. But maven compile goal returning compilation error . :banghead: All the jar's needed to compile are in the single jar file which is added in dependency............................. Please help me! my pom: <dependency> <groupId>eagle</groupId> <artifactId>zkui</artifactId> <version>360LTS</version> <type>jar</type> <scope>compile</scope> </dependency> <build> <sourceDirectory>./src/main/java/</sourceDirectory> <outputDirectory>./target/classes/</outputDirectory> <finalName>${project.groupId}-${project.artifactId}</finalName> <plugins> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-compiler-plugin</artifactId> <version>2.2</version> <configuration> <source>1.6</source> <target>1.6</target> </plugin> </plugins> </build> </project> error: package org.zkoss.zk.ui does not exist this package org.zkoss.zk.ui is in jar file zkex.jar which is in dependency jar eagle:zkui:360LTS jar file Please Help ME!!!! :jumpingjoy: Advance Thanks

  Read the article

• Python - wxPython custom button -> unbound method __init__()? what?

  - by Wallter

  After looking at questions like this it doesn't make sense that my __init__(self, parrent, id) would be throwing a unbound error? help? main.py import wx from customButton import customButton from wxPython.wx import * class MyFrame(wx.Frame): def __init__(self, parent, ID, title): wxFrame.__init__(self, parent, ID, title, wxDefaultPosition, wxSize(400, 400)) # Non-important code here... # This is the first declaration of the Button1 # This is also where the ERROR is thrown. # Omitting this line causes the window to execute # flawlessly. self.Button1 = customButton.__init__(self, parent, -1) # ... finishes in a basic wx.program style... customButton.py # I've included all of the code in the file # because have no idea where the bug/error happens import wx from wxPython.wx import * class Custom_Button(wx.PyControl): # The BMP's Over_bmp = None #wxEmptyBitmap(1,1,1) # When the mouse is over Norm_bmp = None #wxEmptyBitmap(1,1,1) # The normal BMP Push_bmp = None #wxEmptyBitmap(1,1,1) # The down BMP def __init__(self, parent, id, **kwargs): wx.PyControl.__init__(self,parent, id, **kwargs) # Set the BMP's to the ones given in the constructor #self.Over_bmp = wx.Bitmap(wx.Image(MOUSE_OVER_BMP, wx.BITMAP_TYPE_ANY).ConvertToBitmap()) #self.Norm_bmp = wx.Bitmap(wx.Image(NORM_BMP, wx.BITMAP_TYPE_ANY).ConvertToBitmap()) #self.Push_bmp = wx.Bitmap(wx.Image(PUSH_BMP, wx.BITMAP_TYPE_ANY).ConvertToBitmap()) #self.Pos_bmp = self.pos self.Bind(wx.EVT_LEFT_DOWN, self._onMouseDown) self.Bind(wx.EVT_LEFT_UP, self._onMouseUp) self.Bind(wx.EVT_LEAVE_WINDOW, self._onMouseLeave) self.Bind(wx.EVT_ENTER_WINDOW, self._onMouseEnter) self.Bind(wx.EVT_ERASE_BACKGROUND,self._onEraseBackground) self.Bind(wx.EVT_PAINT,self._onPaint) self._mouseIn = self._mouseDown = False def _onMouseEnter(self, event): self._mouseIn = True def _onMouseLeave(self, event): self._mouseIn = False def _onMouseDown(self, event): self._mouseDown = True def _onMouseUp(self, event): self._mouseDown = False self.sendButtonEvent() def sendButtonEvent(self): event = wx.CommandEvent(wx.wxEVT_COMMAND_BUTTON_CLICKED, self.GetId()) event.SetInt(0) event.SetEventObject(self) self.GetEventHandler().ProcessEvent(event) def _onEraseBackground(self,event): # reduce flicker pass def _onPaint(self, event): dc = wx.BufferedPaintDC(self) dc.SetFont(self.GetFont()) dc.SetBackground(wx.Brush(self.GetBackgroundColour())) dc.Clear() dc.DrawBitmap(self.Norm_bmp) # draw whatever you want to draw # draw glossy bitmaps e.g. dc.DrawBitmap if self._mouseIn: # If the Mouse is over the button dc.DrawBitmap(self, self.Mouse_over_bmp, self.Pos_bmp, useMask=False) if self._mouseDown: # If the Mouse clicks the button dc.DrawBitmap(self, self.Push_bmp, self.Pos_bmp, useMask=False)

  Read the article

< Previous Page | 593 594 595 596 597 598 599 600 601 602 603 604  | Next Page >