Search Results

Search found 12605 results on 505 pages for 'angular ui router'.

Page 6/505 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• How do I turn a router into a wireless bridge

  - by Rob Cowell

  I'm trying to get my HD satellite receiver connected to the internet - it has an Ethernet port on the back but my networking equipment is all upstairs. I had the idea of connecting a spare wireless router to the box with an ethernet cable and getting that wireless router to talk to my "main" wireless router (the one with the ADSL connection) to supply internet access. I believe this entails getting the router to work as a "wireless bridge", but I don't know how to do this. Currently, the ADSL line is hooked up to a NETGEAR DG834G. The other two "spare" wireless routers I have to act as the bridge are :- Huawei HG520b Netgear DGN2000 BT Homehub I'd prefer not to change the "main" router (cos I'm used to its web admin UI) - does anyone know a way I can achieve the connectivity I require with the equipment I have?

  Read the article

• How do I turn a router into a wireless bridge

  - by Rob Cowell

  I'm trying to get my HD satellite receiver connected to the internet - it has an Ethernet port on the back but my networking equipment is all upstairs. I had the idea of connecting a spare wireless router to the box with an ethernet cable and getting that wireless router to talk to my "main" wireless router (the one with the ADSL connection) to supply internet access. I believe this entails getting the router to work as a "wireless bridge", but I don't know how to do this. Currently, the ADSL line is hooked up to a NETGEAR DG834G. The other two "spare" wireless routers I have to act as the bridge are :- Huawei HG520b Netgear DGN2000 BT Homehub I'd prefer not to change the "main" router (cos I'm used to its web admin UI) - does anyone know a way I can achieve the connectivity I require with the equipment I have?

  Read the article

• Share Pc' s wifi internet connection to router and spit it out trough it

  - by Maken

  Basicly im trying to share the an internet connection that i receive through wifi from my bestfriend's place to my place and Extend it trough a router for my consoles and other computers in my household i have 1 pc with Wifi /Ethernet , one router "DD-wrt"ed" Schema is like this Internet -----Modem------- (Friend's)Router -----to my PC through Wifi (Ics)---- to Router(2) through lan----- to Computer 1 (over lan or wifi etc...) ------ Computer 2 (over lan or wifi etc...) i want the computer 1 and 2 to have internet from Router(2) if its not clear enough il try to give more details but a little help would be greatly appreciated

  Read the article

• Modify .htm files on wireless router

  - by mdeitrick

  What am I trying to do? I am attempting to access the .htm files on my wireless router to modify the look and feel of the Netgear GENIE webpage(s). What have I done? I've read several articles on eHow and Instructables that detail how to setup your router as an FTP server, since I figured the best way to access the files would be through FileZilla. Setting up an FTP server through my router doesn't sound like what I should do to accomplish my task... or perhaps it is? I've also read the documents provided by Netgear for getting started and setting up functionality on the router. Maybe I overlooked something? My specifications Netgear router WNR2000v3 FileZilla v3.8.1 UPDATE: Since someone voted to close this question I'll clarify what I'm asking for... At the present I am dissatisfied with the current UI/webpage look when logging into routerlogin.net. Furthermore I would like to make changes to the admin dashboard.

  Read the article

• Netgear router-speed problem after XBox use

  - by John Dudley

  When my son is at my place at the weekend, he plays XBox Live over the internet, using my wireless network (Netgear 'g' type router). This usually thrashes & crashes the router to the extent I have to hard-boot it to get it working again. However, after this weekend, on my two laptops, I'm left with the problem that the router is working, but I'm only getting 0.38Mbps out of it, at all times of the day. I've tried hard-booting the router, but no difference. Could this be a knock-on effect of the Xbox use? I can't believe the router could be damaged, but working slower? Is that possible? Tiscali haven't come back to me yet on any 'network' issues. Thanks in advance

  Read the article

• Linksys router with multiple external IP's

  - by Adrian Mester

  In an office I've got a network connection with 5 external IPs and a Linksys router (I'm not 100% percent sure of the model). I need 4 of those 5 IPs to be routed to a server, and the fifth to be shared between the other computers at the office. This can probably be done using a switch in front of the router. Connect the server and the router to the switch, and let the router handle the rest of the network. Is there a way to configure the router to route the 4 IPs to the server, and create an internal network the the other computers at the same time?

  Read the article

• Router loses connection to internet randomly

  - by tvanover

  I have a Belkin wireless G plus Mimo router and it randomly loses the connection to the internet. It seems to happen for a second or two, not enough to impact day to day browsing. But enough to disconnect games, or stall videos I am watching. It happens whether I am plugged into the router or connecting via wifi. I am unsure if it is my router or Comcast that is causing this issue. If I connect a computer directly to the modem the problem never occurs, so that tells me it is probably the router. But I also had a Netgear wireless router WGR614, and it had the same problem. I don't know where to start looking for the source of the problem. What logs should I be combing through? All my machines are win 7 of varying versions.

  Read the article

• Setting up wifi router as a switch for Internet Connection Sharing

  - by William C

  Can my laptop with a 3G connection share its Internet via a Wifi router (Dlink DIR-615)? I turned Internet Connection Sharing on and Windows assigned 192.168.137.1 to my laptop's LAN adapter. Do I connect my laptop to the WAN port or to the LAN port of the router? What should I set as my router's IP address? Do I turn DHCP on my router on? Do I assign 192.168.137.x as static addresses on the other computers? If not, what? Is there anything else I need to set on my router? Thank you!

  Read the article

• Credentials needed for BT line on Netgear router

  - by Bali C

  I have recently bought a new Netgear router to replace my current BTHomeHub as it doesn't support wireless. I did buy a WAP but figured it would be easier to use a router with wireless built in. (It's a modem/router combo). I have got as far as setting up the router on the web interface, but then it asks for a username and password to connect to the net, I can only assume this is for the phone line? I have tried some passwords I could find written down but they don't work, the internet light comes on and then when the creds fail it goes off. I have been on the homehubs web interface and been through all the settings it has to find the credentials it is using which obviously work, but no joy. Is there anything obvious I am missing, or is there a way I can retrieve my settings from my existing router? Any pointers will be very appreciated.

  Read the article

• Get into the router setting without knowing the password [on hold]

  - by Aron

  So my father has changed the router passwords, and programed the router to turn my wifi connection off automaticly at some times, for example at night. I wanted to know if there is any way I can trick this feature? Can i change my ip in some way, the router won't recognize my ip, so my new ip would have internet connection? Is it any way i can get into the router settings and turn that feature off without knowing the router password? Would be happy if I could get replies as soon as possible!

  Read the article

• Dynamic UI vs Static UI

  - by Damien

  I've been wondering, at what point should I give up the convenience of a static data entry form with designer support for a dynamic UI which removes a lot of code duplication? There seems to be a conflict in the programming world where people constantly try to remove code repetition to improve maintainability and yet when it comes to forms, that all goes out of the window and everything gets added explicitly to the forms. What signs should I look for to know when it's time to leave the designer in the dust and create a dynamic UI?

  Read the article

• How do I use a Zyxel P660 router as just modem so that I can connect a WRT54GL router in cascade?

  - by Kenji Kina

  I have a Zyxel P660HW-t1 v2 router (which has a DSL port) and a WRT54GL router (which does not) and the exact same situation as in this thread (UPDATE: the connection between both devices is the important part, since I have been able to set the zyxel router to act as bridge by itself quite nicely. I have accessed my internet connection directly through a PC using PPPoE without any problems, the issues arise when I try to connect the WRT54GL router between the zyxel "modem" and my PCs). I've been trying to use my Zyxel P660 as a modem only: Setup P660 to bridge mode. Changed WRT54GL's IP address to 192.168.2.1 to avoid a conflict on the network. Configured the PPPoE settings as required on WRT54GL. The thing is that when I connect the Zyxel modem/router on the WRT54GL's internet port the light doesn't turn on. I can confirm that this port has been working ok, so I'm not really sure what's going between the devices. I checked several settings such as IPs, tried disabling DHCP on Zyxel/Linksys, Firewall on both and still nothing. Also, I tried connecting Zyxel directly to a computer in bridge mode and dialed successfully. I have even posted a question here before, thinking that what I asked there was the only thing I needed to get things done. Unfortunately it wasn't, and the guy that solved his issue didn't give enough details in his post (and is quite unlikely to give more details since he was an anonymous user). For one, I don't know how to do this part: connected to the Zyxel through telnet and forced LAN port 1 to be at 100mb as well I can't find the option that does this on the zyxel router. Not through telnet or the web admin. Can anyone help me solve this?

  Read the article

• Modem doesn't seem to pass internet connection to router

  - by Vian Esterhuizen

  I was supplied a Cisco DPC3825 modem by my ISP and use a Cisco E4200 as my main router. Today the Internet just stopped working, just out of the blue, I can't think of anything that would have triggered it. It's been working pretty good for the past month except for a few random blips here and there. After some trouble shooting I realized that a direct wired connection to the modem would get me Internet access but if I was wired to the router as I was before I would have no connection. Assuming it was router I connected a TP-Link WR841N but it had the exact same problem. Also, connecting to the router via Wi-Fi from multiple devices will connect me to the router but I still can't get access to the Internet. From these test, it seems that the modem just won't send Internet through to the router but is clearly connecting and able to directly connect to my PC. What I've Tried A full reset and factory reset on the E4200 A full reset on the modem (but I believe my ISP has remote access to the modem because the passwords and so on are always set back). My ISP has remotely reconfigured the modem What I Should Try What else can I try? What should I do to try to narrow down the issue? Can you figure out what the problem might be based on this information?

  Read the article

• Juniper router dropping pings to external interface

  - by Alexander Garden

  My organization has a Juniper SSG20-WLAN that routes our traffic to the outside world. We've been having intermittent problems with our internet connection so I wrote up a Python script to ping the internal interface of the router, the external interface, a couple of our internal servers, the ISP router our router talks to, their upstream provider, and Google and Yahoo for good measure. It does that about every minute. What I have found is that when our internet goes out, our Juniper router ceases responding to pings on the external interface. Everything past that is, of course, unreachable. The internal interface and our internal servers continue to echo back without interruption. None of the counters indicate dropped packets of any type. They all look normal. The logs complain about VIP servers being unavailable but otherwise nothing indicative of network issues. My questions are these: Does this exonerate our ISP? Or, contrawise, might a problem with the connection be causing the external interface to go down? Is there somewhere else in the SSG20, beside the system log and counters, that might help me track down info on the problem? UPDATE: Turned out that one of the switches between my monitoring box and the router was a router itself, and occasionally diverting from the gateway to itself. Kudos to those who made suggestions along those lines. Not really sure which answer to mark as accepted, as it was really stuff in the comments that turned out to be right. Thanks for the suggestions.

  Read the article

• Debian Linux bridging router intermittently dropping packets [migrated]

  - by nomen

  My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Can anybody help?

  Read the article

• Router failover not detecting outside interface link lost

  - by Matt

  Suppose I have two routers configured in master/slave configuration. They look something like this (addresses are not real ones) 123.123.123.10 <===> [eth0] Router 1 (10.1.1.2) [eth1] ===> +----------+ | 10.1.1.1 | ===> LAN 172.123.123.10 <===> [eth0] Router 2 (10.1.1.3) [eth1] ===> +----------+ The 10.1.1.1 is the default route for the Network (10.1.1.0). What's slightly different in this config to other's I've seen is that I don't have an external virtual IP. Also, the 10.1.1.1 addresses are in real life, public IP's (not private ones shown here). This is more of a router setup than a firewall setup so I'm not using NAT here. Now the issue that I'm having is that I can't see any way to configure UCARP or VRRP to monitor both eth0 & eth1 and fail over to the backup router should either of them go down. What I'm seeing is that if Router1 is the master and I unplug eth0 on router1, it doesn't fail over to router 2. However, it will if instead I unplug eth1 of router 1. In VRRP I see there is a cluster group, but it seems that for this to work you need to have virtual ip's or vrrp instances rather than actual interfaces assigned to it. I hope my explanation is clear. How do I get around this?

  Read the article

• Find the IP of the router between me and main router/gateway?

  - by Crash893

  I have a Netgear router that is the main router/gateway in and out of the network. Then I have a Linksys 54g router with WiFi that we use as are main WiFi access point The Cat5 runs from the router to the WiFi routers LAN port (not WAN). And then if you connect to that WAP you are basically on the network. I want to be able to find out what the IP address of that WAP is but so far I can't figure out how to: I've tried doing a tracert to the gateway IP but I get nothing. I've scanned all the IP addressed in the network. I've gone to the Netgear main router and looked under attached devices but it doesn't say anything. Any ideas on how I can figure out how to administer it? (I do have limited physical access but my attempt to plug into it came back with a faulty IP (in the 169 range where the rest of the office is 192.168...). I never set this router up to begin with so I'm reluctant to just kill it with the reset button because I can't get into see what the settings are set to.

  Read the article

• Does this mean the router is faulty?

  - by Ashfame

  I have a router to which I have my desktop (running Ubuntu) connected via LAN & I use it on my phone via wifi. Sometimes it happen that the LAN one will stop working for no reason but the wifi will work fine. And it will resolve away by itself. Since last night, the router was restarting again & again on its own, so I lodged a complaint about it and they said the router is faulty and will be replaced, but I know they don't know anything about how things work & is just going to shoot an arrow in the dark. These restarts has happened for the first time, LAN-wifi issue described earlier is a common one (but not frequent one). So is the router faulty or there is some issue from my ISP side which will continue to persist even after they change the router? My very best guess is that they will replace it with an older refurbished router which will tend to give me more troubles in the coming time, so its better if I change it only its faulty (this is a new one - 6months old, I am its first hand user). I am happy to provide any details.

  Read the article

• D-LINK DIR-615 router keeps giving my wireless devices bad ip addresses

  - by mlsteeves

  I have a D-LINK DIR-615 router, and wired devices have no problem getting an IP, however; wireless devices end up with a 169.254.. address (subsequently, they cannot access the internet through the router). I have removed all wired connections from the router, so there is no other dhcp server running. I've also gone back to the store, and replaced it with another, thinking that maybe it was defective. According to the router, it gave 192.168.0.101 to the wireless device. According to the wireless device it got 169.254.67.71. I've tried both a laptop and an iPod Touch, both exhibit the same behaviour. Has anyone seen this type of behaviour, or have any ideas of stuff to try? NEW INFORMATION I looked at the logs on the router, and when the wireless device tries to connect, this is what is logged: Sep 10 18:13:39 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:31 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:26 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:23 UDHCPD sending OFFER of 192.168.0.111 Sep 10 18:13:21 UDHCPD sending OFFER of 192.168.0.111 I connected a computer directly to the router, and here is what it looks like: Sep 10 18:14:18 UDHCPD Inform: add_lease 192.168.0.110 Sep 10 18:14:14 UDHCPD sending ACK to 192.168.0.110 Sep 10 18:14:14 UDHCPD sending OFFER of 192.168.0.110 Not sure if that helps or not.

  Read the article

• Juniper router dropping pings to external interface

  - by Alexander Garden

  My organization has a Juniper SSG20-WLAN that routes our traffic to the outside world. We've been having intermittent problems with our internet connection so I wrote up a Python script to ping the internal interface of the router, the external interface, a couple of our internal servers, the ISP router our router talks to, their upstream provider, and Google and Yahoo for good measure. It does that about every minute. What I have found is that when our internet goes out, our Juniper router ceases responding to pings on the external interface. Everything past that is, of course, unreachable. The internal interface and our internal servers continue to echo back without interruption. None of the counters indicate dropped packets of any type. They all look normal. The logs complain about VIP servers being unavailable but otherwise nothing indicative of network issues. My questions are these: Does this exonerate our ISP? Or, contrawise, might a problem with the connection be causing the external interface to go down? Is there somewhere else in the SSG20, beside the system log and counters, that might help me track down info on the problem? UPDATE: Turned out that one of the switches between my monitoring box and the router was a router itself, and occasionally diverting from the gateway to itself. Kudos to those who made suggestions along those lines. Not really sure which answer to mark as accepted, as it was really stuff in the comments that turned out to be right. Thanks for the suggestions.

  Read the article

• Router that allows custom Dynamic DNS server [closed]

  - by Thuy

  I've made my own DDNS service and it works fine using an application running on clients to update the IP. But if for some reason I don't have the choice of using my software and instead I need to use a router to update the IP, it becomes troublesome. For example, I needed to setup IPsec from a customer to me and the customers router/firewall (netgear srx5308) has a dynamic IP which is given from the ISP which can't offer static IPs. So it needs to use dynamic dns for it to work. In this case there really isn't a client to run the software on since it's a router/firewall. Unfortunately it seems that most routers are rather unfriendly towards custom DDNS solutions and most offer only dyndns.com or similar templates. Which was the case with this router too. Leaving me with no way to use my own dynamic dns server IP. I have the option of switching out the customers router and I've been looking around for alternatives and other routers/solutions and I was wondering if anyone on this great site might have been in a similar situation or might just know about some router/firewall that is more friendly towards custom ddns solutions that I might be able to use. Thanks in advance for any help or guidance!

  Read the article

• mac + parallels and https site test = router restarts

  - by Erik

  Ok I have an interesting & very frustrating problem happening. I'm going to explain it the best I can. I work as a graphic designer & web designer on a mac and have a Comcast internet connection that comes through a Comcast branded router (SMC8014) which then ties into an Airport Extreme Base Station which runs my office network. I run OS 10.5.7 and also run Parallels 4.0.3 (running Windows XP) for testing websites in Internet Explorer and so on. Ok, so that the basic background. Here's my issue. I've been collaborating an ecommerce website with another designer/developer and when testing the site on the PC side we have started to run into some sort of network problem. The site is https if that matters at all I suspect it may. Basically when I run parallels for testing I am constantly having to restart the router in order to connect to the test site (it's hosted). Funny thing is I can access the rest of the internet fine, just not this site I'm working on until I restart the router (It's sorta like the site is timing out). This never happens when just running the Mac side of things. It only becomes an issue when Parallels is open and I am doing page refreshes while making css or HTML edits via something like Coda or CSS edit (connected to the hosting server via ftp). The real problem is that once the problem starts I only get about 2 or 3 page loads before I have to restart the router again. It's absolutely crippling. I cannot get any work done when I have to restart the router every couple of minutes. So, if you think this problem is isolated to me, the answer is no. The designer/developer I'm collaborating with has an office a couple miles away and experiences very similar problems under slightly different setup. He also has Comcast as his internet provider and connects his router to an Airport and primarily works on a mac. The main difference is that rather than using a visualizer like parallels to test the website on the PC he uses a real live PC that is on his network. Once he fire up the PC to do testing he runs into the same issue described above. After a couple of page refreshes in Internet Explorer or other browser on the PC the site becomes unresponsive and the router has to get restarted. Any thoughts on what is going on here would be greatly appreciated. Thanks in advance.

  Read the article

• new PC not work with existing router, but works fine when directly connecting to cable modem

  - by user34786

  I bought a new desktop PC (eMachine ET1331G-03W from WalMart) with windows 7 installed, but I can not access internet by connecting to my existing wireless router(LinkSys BEFW11S4) with wired cable. Though all other existing desktops and laptops have no problem connecting to the same router. However, the new desktop PC works fine and able to connect to internet if I bypass the router and directly hook up with the cable modem. At new PC when connecting to the router, I got the below information by typing ipconfig, the IP address looks wrong to me: autoconfiguration IPv4 Address: 169.254.71.140 subnet mask: 255.255.0.0 default gateway: (empty) NetBIOS over Tcpip: Enabled Typing ipconfig at all other desktop and laptop have values like below, which are good to me: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.1.140 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 The wireless router was on 192.168.1.1, I do not know why the new desktop got 169.254.71.140 IP? It should have something like 192.168.1.xxx, and it was configured to automatically get IP by DHCP. I have tried to switch cables,power off cable modem, router and reboot new pc many times and got no luck. So I believe this is only an issue related to router or new pc configuration. Can someone help me figure out the issue?

  Read the article

• WNDR3700 Router + Cisco SG200-08 + LACP + Dual Uplink

  - by kobaltz

  Background I have a storage server that has several virtual machine images stored on them. I would store them locally, but I have limited space on my desktop (using SSD storage). I would like to increase the bandwidth between the desktop and the storage server by using two NICs on each computer. My original configuration allowed about 55MBps between the desktop and storage server. This storage server also has several TBs of documents, pictures, movies, vms, and ISO/programs. The storage server has 8 1.5TB hard drives in a RAID 10 configuration with a hardware RAID controller. The benchmarks on the RAID 10 are about 300MBps. Configuration In short, I am trying to bridge my switch and router. The switch is a small 8 port Cisco smart switch that supports 802.3ad LACP. I have two computers plugged into the switch, each with 2 Intel Gigabit NICs. The first computer is a Windows 7 machine that has the Intel ANS software installed. I have LACP configured with the computer and now show 3 NICs (2 Physical + 1 TEAM Virtual @ 2Gbps). It looks like this computer is configured correctly. I trunked the two ports that this computer is plugged into with the switch's web interface. The second computer is a homebrew storage box running debian. I also have the bonding enabled on this machine and the switch configured with LACP. Without having the WNDR3700 router in the picture yet, I am able to communicate between the Windows 7 machine and the debian box since they both have static IP addresses. With LACP enabled on both machines I am getting about 106-108MBps speeds. Issue I plug in a network cable from the switch into the router and enable DHCP on the desktop. I saw no need to have a static address on the desktop. My transfer rates are still from 106MBps-108MBps. While this is still a boost, I am trying to figure out how to get about 140-180MBps. I am thinking that I need to increase the bandwidth from the router to the switch. My switch allows 4 groups for port trunking. I plugged in a second network cable from the router to the switch. My question is, what is the proper way to fix this issue. Should I port trunk the two ports that are going from the switch to the router? Keep in mind that the router is a WNDR3700 and is unsure whether or not it supports LACP. I do have OpenWRT installed on the router, but it still wasn't clear in any documentation that I found if it supported 802.3ad LACP standards. I am also wondering if there needs to be anything changed within the Cisco settings. [Edit] - Corrected some numbers, wasn't really paying attention. It looks like the speeds though at least two NICs are bonded with LACP is still reaching the max bandwidth of one port. Is there a way to configure the switch so that I can increase this bandwidth? Also, on the storage server, I had a couple of extra NICs laying around and threw them on there as well. Another EDIT and More Findings I happened to look at the traffic of each individual NIC and think that I see the problem. I tested with a simple transfer for a 4GB file. I noticed that only one of the NICs was taking the load of the traffic. I then copied the file back to the Storage Server and noticed that the other NIC was sending out the traffic. I have 802.3ad LACP enabled on the two NICs and I see that it gets enabled dynamically on the switch's interface. Should I be using Static Link Aggregation?

  Read the article

• Where do I get UI Spy?

  - by Anthony Mastrean

  Where can I download UI Spy?

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >