Search Results

Search found 347 results on 14 pages for 'bryan wong'.

Page 6/14 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• Is it possible to search an apt repository via a web browser?

  - by Bryan

  I've installed the beta version of Ubuntu 10.04 server edition (x64), but the system doesn't have an internet connection. Is there a way I can find out what packages are in the apt repository with nothing more than a web browser? The reason I'm asking, is because I will have an internet connection available when the production system goes live, but it simply isn't possible to internet connect my development system.

  Read the article

• Roughly cutting Fibre Cables

  - by Bryan

  I recently asked a question about which type of Fibre optic cable to use for my installation. We have now found a cable type and supplier and I'm about to order the cable (OM3, Tight Buffered, 12 Core), however I have a further question: We are shortly moving in to a new building (still being constructed) and we are about to get a window in which we will be able to run any cabling that we need. How should I roughly cut the fibre? Can I just use some heavy shears to cut through the cable? I'm aware that doing so will damage the ends, but will the damage be limited to the ends, or could the cracks/fractures continue up the length of the cable? p.s. I have already allowed for several metres of extra cable at each end, and I am going to get a specialist in to terminate the fibres.

  Read the article

• How can I perform a controlled shutdown of a virtualbox guest using VBoxManage?

  - by Bryan

  I'm currently testing Ubuntu 10.04, and have install the VirtualBox software. I have also installed Ubuntu 10.04 as a VirtualBox guest running on the host system. I've installed the VirtualBox Utils into the guest OS, as follows: sudo apt-get install virtualbox-ose-guest-utils What I want to be able to do is to initiate a controlled shutdown of the guest, from the host system using the VBoxManage command. I first tried this command: VBoxManage controlvm guest poweroff which worked, but didn't initiate a controlled shutdown, it effectively pulls the plug on the guest. I've since found that this command should do the trick: VBoxManage controlvm guest acpipowerbutton but this doesn't appear to do anything. Can anyone tell me what I'm doing wrong? p.s. I don't want to use SSH & Certificates to do this, as I'm also going to be running Windows guests, and I want the solution to work for all guests.

  Read the article

• Creating Tables in DokuWiki

  - by Bryan

  I'm trying to create a table in DokuWiki, with a cell that vertically spans, however unlike the examples in the syntax guide, the cell I want to create has more than one row of text. The following is an ASCII version of what I'm trying to achieve +-----------+-----------+ | Heading 1 | Heading 2 | +-----------+-----------+ | | Multiple | | Some text | rows of | | | text | +-----------+-----------+ I've tried the following syntax ^ Heading 1 ^ Heading 2 ^ | Some text | Multiple | | ::: | rows of | | ::: | text | but this generates the output +-----------+-----------+ | Heading 1 | Heading 2 | +-----------+-----------+ | | Multiple | | +-----------+ | Some text | rows of | | +-----------+ | | text | +-----------+-----------+ I can't find anything in the DokuWiki documentation, so I'm hoping I'm missing something fundamentally simple?

  Read the article

• iproute2 premptive route creation, i think....

  - by Bryan Hunt

  Firstly: I know could do this the easy way with SSH but I want to learn how to route. I want to route packets back through the same tun0 interface from which they came into my system. I can do it for single routes. This works: sudo ip route add 74.52.23.120 metric 2 via 10.8.0.1 But i'd have to add them manually for each request that came down the pipe I've taken the blue pill and followed the http://lartc.org/howto/lartc.netfilter.html: Netfilter & iproute - marking packets tutorial But it's oriented towards redirecting OUTGOING packets based upon markers What I want is for a packet that comes in via tun0 not to be dropped which is what's happening right now, running scappy or suchlike to receive packets it doesn't seem to be receiving anything. Watching in wireshark I see the initial SYN packets coming in on the tun0 interface but that's as far as it gets without a static route as shown above. Am I nuts?

  Read the article

• IIS/SMTP - unable to move emails from inetpub/mailroot/Queue due to file lock

  - by Bryan Roth

  I have a listener that processes emails in the inetpub/mailroot/Queue directory. Once the listener is done processing an email it proceeds to move the email to another directory. However, moving the email is not possible due to a file lock by the process inetinfo.exe. I have noticed that this file lock is released after a period time that ranges from several hours to several days. You can see that the Queue directory can get pretty full over time. The only way I have been able to work around this is by manually stopping and starting my SMTP virtual server in IIS. Is it possible to release this file lock programmatically? If not, is it possible to expedite releasing this file lock?

  Read the article

• How can I make gitosis distinguish between two users with the same username

  - by bryan kennedy

  I have a gitosis system that seems to be working correctly except for a common problem we run into where I can't distingush permissions between two users who have the same username, but different hosts. For example: [email protected] 's SSH key is in the key folder. And so is [email protected] 's SSH is also in the key folder. These two jsmith's are two different people on two different computers. However, when I configure them in the gitosis.conf file with the usernames jsmith@computer or jsmith@machine, it seems like each user just gets the same permission. Can gitosis not distinguish the full username (name and host)? If not, how do I deal with multiple users accessing our system with common usernames? Thanks for any help.

  Read the article

• Wi-Fi connection drops when downloading torrents, but wired connection still works

  - by bryan

  After downloading for an hour or so, the Wi-Fi connection on my tablet stops working; forcing me to restart my router(it basically hangs when trying to connect). This only happens when downloading torrents. WIRED connection on my desktop PC with router still works fine; no issues at all. I tired to lower the number of global connections to 50, but I still have the problem. I have also updated to the latest Linksys firmware. One PC, a tablet and a smartphone. I have COX cable. Please let me know if you need any other info. Thank you!

  Read the article

• .htaccess to restrict access to only select files

  - by Bryan Ward

  I have a directory in my webserver for which I would like to serve up only pdf files. I found I can restrict access using the .htaccess, and using something like <FilesMatch "\.(text,doc)"> Order allow,deny Deny from all Satisfy All </FilesMatch> to serve up everything except a regular expression. Is it possible to instead restrict access to only files which meet some regular expression?

  Read the article

• OEM Office 2010 without media - how to reinstall?

  - by Bryan

  I have recently purchased a new office desktop PC from Dell with OEM version of Windows 7 Pro and Office 2010 Pro. One of the reasons I always use Dell is that they always supply installation media CDs or DVDs, unlike some other companies that just give you ISO images on the hard disk that you have to burn yourself. This is the first PC I have purchased with Office 2010 Pro (OEM), and I was disappointed to see that Dell don't ship out any installation media for office 2010, they just supply a piece of card with the office pro product key printed on it. If the HDD fails completely and I have to perform a clean installation, how can I re-install office? Can I download the trial version of Office 2010 and install that, then offer it my product key? Bearing in mind that the product key is an OEM product, not a retail product, would this work?

  Read the article

• lvm mirroring space unavailable.

  - by Bryan Ward

  I am trying to migrate my data on lvm to two new disks, and setup mirroring between the two. I have successfully migrated all of the data to the first of the two disks, leaving the second one completely available as a mirror. I verified this using pvdisplay -m /dev/sd{g,h}1 --- Physical volume --- PV Name /dev/sdg1 VG Name vg PV Size 931.51 GiB / not usable 3.19 MiB Allocatable yes PE Size 4.00 MiB Total PE 238466 Free PE 82866 Allocated PE 155600 PV UUID v2nc3j-EFBR-QpuG-xgro-Rm59-fmu6-IB3QcR --- Physical Segments --- Physical extent 0 to 49999: Logical volume /dev/vg/videos Logical extents 0 to 49999 Physical extent 50000 to 99999: Logical volume /dev/vg/home Logical extents 0 to 49999 Physical extent 100000 to 129999: Logical volume /dev/vg/music Logical extents 0 to 29999 Physical extent 130000 to 155599: Logical volume /dev/vg/videos Logical extents 50000 to 75599 Physical extent 155600 to 238465: FREE --- Physical volume --- PV Name /dev/sdh1 VG Name vg PV Size 931.51 GiB / not usable 3.19 MiB Allocatable yes PE Size 4.00 MiB Total PE 238466 Free PE 238466 Allocated PE 0 PV UUID LuTrem-WcsZ-qw7l-2CDS-lLKI-wdq0-QEXhLf --- Physical Segments --- Physical extent 0 to 238465: FREE Then when I try to mirror the home logical volume for example, it says that I do not have sufficient space. I used lvconvert -m1 vg/home and the output was: Insufficient suitable allocatable extents for logical volume : 50000 more required Unable to allocate extents for mirror(s). This puzzling to me because it appears as if there is plenty of space on the second disk to mirror. Is there something I have done wrong here? Or is there a way to explicitly tell LVM where to put each leg of the mirror? I'm using lvm2.

  Read the article

• How can make rsync use sudo

  - by Bryan M.

  I use rsync to mirror a number of folders on our failover server. However, some of our files, such as thumbnails or full-text indexes, are generated by our applications under the web user (named 'nobody'), and default to restrictive permissions. Also, I'm doing this over ssh, where root access is disabled, and I'd like to keep it that way, if possible. Is there any reasonable way I can tell rsync to run as sudo? Or should I look into changing the file permissions? Thanks

  Read the article

• Word Macro: Move Cursor Down a Row

  - by Bryan

  I have a macro which I've been using to merge two cells together in a word table, but what I want to do is to get the cursor to move down by one cell, so that I can repeatedly press the shortcut key to repeat the command over and over. The macro code that I have (shamelessy copied and pasted from a web page), is as follows: Sub MergeWithCellToRight() ' ' MergeWithCellToRight Macro ' ' Dim oRng As Range Dim oCell As Cell Set oCell = Selection.Cells(1) If oCell.ColumnIndex = Selection.Rows(1).Cells.Count Then MsgBox "There is no cell to the right?", vbCritical, "Error" Exit Sub End If Set oRng = oCell.Range oRng.MoveEnd wdCell, 1 oRng.Cells.Merge Selection.Collapse wdCollapseStart End Sub I've attempted to add the following line just before the 'End Sub' statement Selection.MoveDown wdCell, 1 but this generates the error, Run-time error '4120' Bad Parameter whenever I execute the macro. Can anyone tell me how to correct this or what I'm doing wrong?

  Read the article

• Upgrading disks in WD My Book Studio Edition II

  - by Bryan

  About 18 months ago, I purchased a 1Tb Western Digital My Book Studio Edition II for backup of my home system. It has 2x 500Gb drives in it, which I had configured as RAID 1. One of the disks has now died, and rather than replace like for like, I'd like to replace both drives to increase the capacity (2 x 2Tb would be nice). I'm struggling to find a list of compatible drives, has anyone else upgraded theirs?

  Read the article

• Link bonding across multiple switches?

  - by Bryan Agee

  I've read up a little bit on bonding nics with ifenslave; what I'm having trouble understanding is whether there is special configuration needed in order to split the bonds across two switches. For example, if I have several servers that all have two nics each, and two separate switches, do I just configure the bonds and plug 1 nic from each into switch #1 and the other from each into switch #2? or is there more to it than that? If the bonds are active-backup, will a nic failure on single machine mean that server may become disconnected since the rest of the machines are using the primary nic and it's using the secondary? Or do you link the switches with one cable as well?

  Read the article

• nginx- Rewrite URL with Trailing Slash

  - by Bryan

  I have a specialized set of rewrite rules to accommodate a mutli site cms setup. I am trying to have nginx force a trailing slash on the request URL. I would like it to redirect requests for domain.com/some-random-article to domain.com/some-random-article/ I know there are semantic considerations with this, but I would like to do it for SEO purposes. Here is my current server config. server { listen 80; server_name domain.com mirror.domain.com; root /rails_apps/master/public; passenger_enabled on; # Redirect from www to non-www if ($host = 'domain.com' ) { rewrite ^/(.*)$ http://www.domain.com/$1 permanent; } location /assets/ { expires 1y; rewrite ^/assets/(.*)$ /assets/$http_host/$1 break; } # / -> index.html if (-f $document_root/cache/$host$uri/index.html) { rewrite (.*) /cache/$host$1/index.html break; } # /about -> /about.html if (-f $document_root/cache/$host$uri.html) { rewrite (.*) /cache/$host$1.html break; } # other files if (-f $document_root/cache/$host$uri) { rewrite (.*) /cache/$host$1 break; } } How would I modify this to add the trailing slash? I would assume there has to be a check for the slash so that you don't end up with domain.com/some-random-article//

  Read the article

• Installing Linux on a Windows Computer Partition

  - by bryan sammon

  I was thinking of setting up a partition on my Vista comp and installing Linux on that partition. I was gonna install Ubuntu on this partition. I was wondering if the equipment I have (i.e. video card, mouse, keyboard, network card) would be potentially unable to work on a linux platform? Any advice on doing this? I havent started yet, just doing my homework. Thanks alot, any answer is always appreciated

  Read the article

• What is wrong with my expect script?

  - by Bryan

  I'm trying to learn how to use the expect command, to help me automate deployment of some software via shell scripts, and figured I start with something simple to get me started. I've created a file in my home dir called 'foo' using: touch foo And I've created the following script saved as test.exp #!/usr/bin/expect spawn rm -i foo expect "rm: remove regular empty file `foo'?" send "y\r" When I run the script using ./test.exp, it spawns the rm command, but it doesn't appear to send the Y and carriage return. I know I don't have a typo in the expect string, as I've used copy and paste to put in the script. What am I doing wrong?

  Read the article

• Is it a bad idea to make roaming profile share available offline?

  - by Bryan

  This is regarding a Windows 2008 R2 domain. The Documents, Desktop, Application Data folders are all redirected to users' home directory (mapped as Z:). The users home directory is configured to be offline for mobile users. User profiles are configured as roaming, and located on a separate share (not mapped as a network drive), just accessed via an UNC path. Would it be a good or idea to make the roaming profile share available offline for mobile users using the caching option "All files and programs that users open from the share will be automatically available offline"?

  Read the article

• USB headset no sound during games or playing music, but i can hear on ventrilo

  - by Bryan rayburn

  I currently just bought a new USB headset to replace my old mic. I put everything in order today and i can hear people talk when i'm logged in through Ventrilo, however, i get no game sounds or music playing from anything else. Just only from the Ventrilo people talking i can hear them. I have the Vista operating system installed. Please help , it's frustrating me lol.

  Read the article

• Exchange 2010 Internal Auto Discover Migrate away from current .local DNS name

  - by Bryan

  We have an Exchange 2010 Server, running within our Active Directory domain, with an internal hostname of server.example.local. The server is configured for Exchange anywhere, but currently has a self signed certificate with a name of server.example.local installed. Internally, clients connect and work fine, but externally, we are having certificate errors as you would expect. I'm about to purchase a UCC SSL Certificate to install on the server with all the relevant SANs on the certificate to correct this, but due to obvious problem obtaining a trusted cert with .local as a subject alternative name, I'm looking to configure clients on the internal network so that they don't use any reference to the .local hostname. I've configured our external DNS name for the server as exchange.example.com, and have created an CNAME for autodiscover.example.com which also (correctly) points to exchange.example.com. I've also configured internal DNS records for these two hostnames which point to the internal interface of the same server. I don't anticipate any problems here. I'm now trying to reconfigure Auto Discover internally, so that Outlook attempts to connect to exchange.example.com. I've followed the steps in KB940726 to prepare for this, and this appeared to work fine. No errors were generated and I was able to verify the CAS name in AD using ADSI edit. I've just tried testing this with a newly created test user account complete with a new Exchange mailbox, and Outlook 2007 connects fine on the internal network, but looking deeper in the Exchange profile, Outlook is still resolving the server name as server.example.local. Could it be the self signed cert, that is causing Outlook to display the server name as server.example.local, or is there still something wrong with my internal autodiscover configuration? Edit I've proven it isn't the certificate that is responsible for outlook returning server.example.local, by installing another self certified certificate with a name of test.example.com. When creating a new outlook profile, I get the mismatch error I'm expceting, but after accepting the cert, and finishing the config of the Outlook profile, again it still shows server.example.local as the server name. This means that if I were to purchase the UCC cert now, that external client would work fine, but internal clients would show a certificate name mismatch. Any ideas where to start diagnosing this?

  Read the article

• Windows Explorer Hangs on Right-Click

  - by Bryan

  I am not sure if this is the right site to post this one as I typically post coding questions on stackoverflow. But I'll ask anyways and hopefully someone can move it if it's incorrect. Currently I have a customer built PC, utilizing an Intel i7 chip, 1300WATT PSU, 8Gigs of RAM, and two video cards. Originally I had the one video card (NVIDIA) that used the PSU and had two DVI output. After purchasing a third monitor I installed another ATI) graphics card not needed any PSU connectors. After installing and restarting, I noticed that when I right-click on my desktop, or through Windows Explorer it will hang, freeze then restarted. Sometimes after Windows Explorer restarts the problem dissipates. I checked to make sure everything was connected properly and it was. I repaired the ATI Catalyst Control Center to see if that had an issue, and I checked to see if either video card required updated drivers. Nothing worked. I tried restarting my PC and that didn't work. I tried using ShellXView (I forgot what it's actually called) and tried closed processes but that didn't work. Does anyone have any idea what could have caused this orpossible solutions I should try?< Thanks in advance.

  Read the article

• Easier way to create floppy disk images?

  - by Bryan

  I'm using Vyatta routers with KVM and want to attach a floppy drive with a config file for Vyatta when I boot the image. I'll be doing this over and over again, and as such am looking for an automated way of creating the floppy images. Right now, I'm doing the following: Create floppy image with qemu-img create Format floppy image with mkdosfs Mount floppy image with mount -t fat /tmp/floppy.img /media/floppy Populate floppy image with cp -r /tmp/configs/ /media/floppy/ Unmount floppy image with umount /media/floppy Save floppy image with mv /tmp/floppy.img ~/floppies/ Any chance there's an easier way to do this?! Perhaps a shortcut application that I can give a directory to and it will do all this for me w/out having to mount the image?

  Read the article

• RDS Replication across regions

  - by Bryan Migliorisi

  We are using Amazon AWS for our web services but given the recent instabilities in their infrastructure, we are trying to figure out how to run our application across multiple regions for additional redundancy. Ideally, we would run our entire app in a active-active configuration in multiple regions but our main concern is that we are using RDS, which I understand cannot replicate across regions. One possible solution (though we have not tried or proven it would work) would be to do mysqldump or EBS snapshots every hour or so but this would mean that we would be forced to run in an active-passive configuration. Our data would be at most an hour behind. This carries its own issues around data synchronization when we failover and the master comes back up, so its not the best solution. Are there any proven solutions for replicating RDS across regions?

  Read the article

• How to Configure Different Gateways for Different VLANs

  - by Bryan

  I have around 10 VLANs, and two different internet gateways. I want traffic on some VLANs to use one gateway, and traffic on other VLANs to use another gateway. (e.g. I wish to route server traffic via one gateway and desktop internet traffic down another). Is it possible to configure different default routes for different VLANs on a Dell 6224 switch? Or is their a better way of doing what I'm trying to achieve? The core switch I am using is a Dell PowerConnect 6224 switch. Currently I'm using: ip route 0.0.0.0 0.0.0.0 10.58.3.16 which creates the default gateway for all VLANs. I did consider adding multiple routes with equal metric, and setting ACLs between the VLANs to deny access to the 'wrong' gateway, but that idea just doesn't feel right to me.

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >