Search Results

Search found 28381 results on 1136 pages for 'build settings'.

Page 6/1136 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• 'pip install carbon' looks like it works, but pip disagrees afterward

  - by fennec

  I'm trying to use pip to install the package carbon, a package related to statistics collection. When I run pip install carbon, it looks like everything works. However, pip is unconvinced that the package is actually installed. (This ultimately causes trouble because I'm using Puppet, and have a rule to install carbon using pip, and when puppet asks pip "is this package installed?" it says "no" and it reinstalls it again.) How do I figure out what's preventing pip from recognizing the success of this installation? Here is the output of the regular install: root@statsd:/opt/graphite# pip install carbon Downloading/unpacking carbon Downloading carbon-0.9.9.tar.gz Running setup.py egg_info for package carbon package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) Requirement already satisfied (use --upgrade to upgrade): twisted in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): txamqp in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): zope.interface in /usr/local/lib/python2.7/dist-packages (from twisted->carbon) Requirement already satisfied (use --upgrade to upgrade): distribute in /usr/local/lib/python2.7/dist-packages (from zope.interface->twisted->carbon) Installing collected packages: carbon Running setup.py install for carbon package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) changing mode of build/scripts-2.7/validate-storage-schemas.py from 664 to 775 changing mode of build/scripts-2.7/carbon-aggregator.py from 664 to 775 changing mode of build/scripts-2.7/carbon-cache.py from 664 to 775 changing mode of build/scripts-2.7/carbon-relay.py from 664 to 775 changing mode of build/scripts-2.7/carbon-client.py from 664 to 775 changing mode of /opt/graphite/bin/validate-storage-schemas.py to 775 changing mode of /opt/graphite/bin/carbon-aggregator.py to 775 changing mode of /opt/graphite/bin/carbon-cache.py to 775 changing mode of /opt/graphite/bin/carbon-relay.py to 775 changing mode of /opt/graphite/bin/carbon-client.py to 775 Successfully installed carbon Cleaning up... root@statsd:/opt/graphite# pip freeze | grep carbon root@statsd: Here is the verbose version of the install: root@statsd:/opt/graphite# pip install carbon -v Downloading/unpacking carbon Using version 0.9.9 (newest of versions: 0.9.9, 0.9.9, 0.9.8, 0.9.7, 0.9.6, 0.9.5) Downloading carbon-0.9.9.tar.gz Running setup.py egg_info for package carbon running egg_info creating pip-egg-info/carbon.egg-info writing requirements to pip-egg-info/carbon.egg-info/requires.txt writing pip-egg-info/carbon.egg-info/PKG-INFO writing top-level names to pip-egg-info/carbon.egg-info/top_level.txt writing dependency_links to pip-egg-info/carbon.egg-info/dependency_links.txt writing manifest file 'pip-egg-info/carbon.egg-info/SOURCES.txt' warning: manifest_maker: standard file '-c' not found package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) reading manifest file 'pip-egg-info/carbon.egg-info/SOURCES.txt' writing manifest file 'pip-egg-info/carbon.egg-info/SOURCES.txt' Requirement already satisfied (use --upgrade to upgrade): twisted in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): txamqp in /usr/local/lib/python2.7/dist-packages (from carbon) Requirement already satisfied (use --upgrade to upgrade): zope.interface in /usr/local/lib/python2.7/dist-packages (from twisted->carbon) Requirement already satisfied (use --upgrade to upgrade): distribute in /usr/local/lib/python2.7/dist-packages (from zope.interface->twisted->carbon) Installing collected packages: carbon Running setup.py install for carbon running install running build running build_py creating build creating build/lib.linux-i686-2.7 creating build/lib.linux-i686-2.7/carbon copying lib/carbon/amqp_publisher.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/manhole.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/instrumentation.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/cache.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/management.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/relayrules.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/events.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/protocols.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/conf.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/rewrite.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/hashing.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/writer.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/client.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/util.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/service.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/amqp_listener.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/routers.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/storage.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/log.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/__init__.py -> build/lib.linux-i686-2.7/carbon copying lib/carbon/state.py -> build/lib.linux-i686-2.7/carbon creating build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/receiver.py -> build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/rules.py -> build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/buffers.py -> build/lib.linux-i686-2.7/carbon/aggregator copying lib/carbon/aggregator/__init__.py -> build/lib.linux-i686-2.7/carbon/aggregator package init file 'lib/twisted/plugins/__init__.py' not found (or not a regular file) creating build/lib.linux-i686-2.7/twisted creating build/lib.linux-i686-2.7/twisted/plugins copying lib/twisted/plugins/carbon_relay_plugin.py -> build/lib.linux-i686-2.7/twisted/plugins copying lib/twisted/plugins/carbon_aggregator_plugin.py -> build/lib.linux-i686-2.7/twisted/plugins copying lib/twisted/plugins/carbon_cache_plugin.py -> build/lib.linux-i686-2.7/twisted/plugins copying lib/carbon/amqp0-8.xml -> build/lib.linux-i686-2.7/carbon running build_scripts creating build/scripts-2.7 copying and adjusting bin/validate-storage-schemas.py -> build/scripts-2.7 copying and adjusting bin/carbon-aggregator.py -> build/scripts-2.7 copying and adjusting bin/carbon-cache.py -> build/scripts-2.7 copying and adjusting bin/carbon-relay.py -> build/scripts-2.7 copying and adjusting bin/carbon-client.py -> build/scripts-2.7 changing mode of build/scripts-2.7/validate-storage-schemas.py from 664 to 775 changing mode of build/scripts-2.7/carbon-aggregator.py from 664 to 775 changing mode of build/scripts-2.7/carbon-cache.py from 664 to 775 changing mode of build/scripts-2.7/carbon-relay.py from 664 to 775 changing mode of build/scripts-2.7/carbon-client.py from 664 to 775 running install_lib copying build/lib.linux-i686-2.7/carbon/amqp_publisher.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/manhole.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/amqp0-8.xml -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/instrumentation.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/cache.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/management.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/relayrules.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/events.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/protocols.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/conf.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/rewrite.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/hashing.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/writer.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/client.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/util.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/aggregator/receiver.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/aggregator/rules.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/aggregator/buffers.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/aggregator/__init__.py -> /opt/graphite/lib/carbon/aggregator copying build/lib.linux-i686-2.7/carbon/service.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/amqp_listener.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/routers.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/storage.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/log.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/__init__.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/carbon/state.py -> /opt/graphite/lib/carbon copying build/lib.linux-i686-2.7/twisted/plugins/carbon_relay_plugin.py -> /opt/graphite/lib/twisted/plugins copying build/lib.linux-i686-2.7/twisted/plugins/carbon_aggregator_plugin.py -> /opt/graphite/lib/twisted/plugins copying build/lib.linux-i686-2.7/twisted/plugins/carbon_cache_plugin.py -> /opt/graphite/lib/twisted/plugins byte-compiling /opt/graphite/lib/carbon/amqp_publisher.py to amqp_publisher.pyc byte-compiling /opt/graphite/lib/carbon/manhole.py to manhole.pyc byte-compiling /opt/graphite/lib/carbon/instrumentation.py to instrumentation.pyc byte-compiling /opt/graphite/lib/carbon/cache.py to cache.pyc byte-compiling /opt/graphite/lib/carbon/management.py to management.pyc byte-compiling /opt/graphite/lib/carbon/relayrules.py to relayrules.pyc byte-compiling /opt/graphite/lib/carbon/events.py to events.pyc byte-compiling /opt/graphite/lib/carbon/protocols.py to protocols.pyc byte-compiling /opt/graphite/lib/carbon/conf.py to conf.pyc byte-compiling /opt/graphite/lib/carbon/rewrite.py to rewrite.pyc byte-compiling /opt/graphite/lib/carbon/hashing.py to hashing.pyc byte-compiling /opt/graphite/lib/carbon/writer.py to writer.pyc byte-compiling /opt/graphite/lib/carbon/client.py to client.pyc byte-compiling /opt/graphite/lib/carbon/util.py to util.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/receiver.py to receiver.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/rules.py to rules.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/buffers.py to buffers.pyc byte-compiling /opt/graphite/lib/carbon/aggregator/__init__.py to __init__.pyc byte-compiling /opt/graphite/lib/carbon/service.py to service.pyc byte-compiling /opt/graphite/lib/carbon/amqp_listener.py to amqp_listener.pyc byte-compiling /opt/graphite/lib/carbon/routers.py to routers.pyc byte-compiling /opt/graphite/lib/carbon/storage.py to storage.pyc byte-compiling /opt/graphite/lib/carbon/log.py to log.pyc byte-compiling /opt/graphite/lib/carbon/__init__.py to __init__.pyc byte-compiling /opt/graphite/lib/carbon/state.py to state.pyc byte-compiling /opt/graphite/lib/twisted/plugins/carbon_relay_plugin.py to carbon_relay_plugin.pyc byte-compiling /opt/graphite/lib/twisted/plugins/carbon_aggregator_plugin.py to carbon_aggregator_plugin.pyc byte-compiling /opt/graphite/lib/twisted/plugins/carbon_cache_plugin.py to carbon_cache_plugin.pyc running install_data copying conf/storage-schemas.conf.example -> /opt/graphite/conf copying conf/rewrite-rules.conf.example -> /opt/graphite/conf copying conf/relay-rules.conf.example -> /opt/graphite/conf copying conf/carbon.amqp.conf.example -> /opt/graphite/conf copying conf/aggregation-rules.conf.example -> /opt/graphite/conf copying conf/carbon.conf.example -> /opt/graphite/conf running install_egg_info running egg_info creating lib/carbon.egg-info writing requirements to lib/carbon.egg-info/requires.txt writing lib/carbon.egg-info/PKG-INFO writing top-level names to lib/carbon.egg-info/top_level.txt writing dependency_links to lib/carbon.egg-info/dependency_links.txt writing manifest file 'lib/carbon.egg-info/SOURCES.txt' warning: manifest_maker: standard file '-c' not found reading manifest file 'lib/carbon.egg-info/SOURCES.txt' writing manifest file 'lib/carbon.egg-info/SOURCES.txt' removing '/opt/graphite/lib/carbon-0.9.9-py2.7.egg-info' (and everything under it) Copying lib/carbon.egg-info to /opt/graphite/lib/carbon-0.9.9-py2.7.egg-info running install_scripts copying build/scripts-2.7/validate-storage-schemas.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-aggregator.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-cache.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-relay.py -> /opt/graphite/bin copying build/scripts-2.7/carbon-client.py -> /opt/graphite/bin changing mode of /opt/graphite/bin/validate-storage-schemas.py to 775 changing mode of /opt/graphite/bin/carbon-aggregator.py to 775 changing mode of /opt/graphite/bin/carbon-cache.py to 775 changing mode of /opt/graphite/bin/carbon-relay.py to 775 changing mode of /opt/graphite/bin/carbon-client.py to 775 writing list of installed files to '/tmp/pip-9LuJTF-record/install-record.txt' Successfully installed carbon Cleaning up... Removing temporary dir /opt/graphite/build... root@statsd:/opt/graphite# For reference, this is pip 1.0 from /usr/lib/python2.7/dist-packages (python 2.7)

  Read the article

• iPhone Settings app and keyboard control?

  - by randallmeadows

  So I'm putting my app's preference settings into the Settings app. One of the settings is an edit text field (PSTextFieldSpecifier). When touched, the keyboard dutifully appears, I can make the edits, but when I press Return....nothing. Well, the editing is completed, but the keyboard remains. I see no way to make the keyboard go away. I also notice this same behavior in other Settings panes, including those from Apple. Do I assume correctly that this is just standard behavior and I need to just accept the fact that my Settings table has now been reduced to half size, and just deal? Furthermore, I gather there is no approved way to have a "rich" child pane display, such as that seen in Settings-General-About-Legal? Or a way to do what appears to be a -presentModalViewController, a la Settings-General-Passcode Lock?

  Read the article

• Accidentally uninstalled Ubuntu 14.04 system settings. How to get them back?

  - by Dan

  Somehow, cleaning up useless software (using software center), I uninstalled Ubuntu "system settings". I did this by mistake. Now I fail to find system settings application using software center (and there are so many items in history...). It seems strange to me because usually when I try to uninstall something critical (system testing for example), the dependencies manager tells me It will uninstall the whole desktop system then. I am sure I did not have that warning. So I need the name of the software to install or a command line command rather than a system restore to get it back. Very interesting thing. If you ever want to play with this and reproduce it, you will be confused to see Ubuntu Mobile system settings instead! Yes, mobile network and touchscreen settings! Happy pre-release viewing!

  Read the article

• Android SQLiteConstraintException: error code 19: constraint failed

  - by Tom D

  I've seen other questions about this exception, but all of them seem to be resolved with the solution that a row with the primary key specified already exists. This doesn't seem to be the case for me. I have tried replacing all single quotes in my strings with double quotes, but the same problem occurs. I'm trying to insert a row into the Settings table of the SQLite database I've created by doing the following: db.execSQL("DROP TABLE IF EXISTS "+Settings.SETTINGS_TABLE_NAME + ";"); db.execSQL(CREATE_MEDIA_TABLE); db.execSQL(CREATE_SETTINGS_TABLE); Cursor c = getAllSettings(); //If there isn't already a settings row, create a row full of defaults if(c.getCount()==0){ ContentValues cv = new ContentValues(); cv.put(Settings.SETTING_UNIQUE_ID, "'"+Settings.uniqueID+"'"); cv.put(Settings.SETTING_DEVICE_ID, Settings.SETTING_DEVICE_ID_DEFAULT); cv.put(Settings.SETTING_CONNECTION_PREFERENCE, Settings.SETTING_CONNECTION_PREFERENCE_DEFAULT); cv.put(Settings.SETTING_AD_HOC_ENABLED, Settings.SETTING_AD_HOC_ENABLED_DEFAULT); cv.put(Settings.SETTING_SERVER_ADDRESS, Settings.SETTING_SERVER_ADDRESS_DEFAULT); cv.put(Settings.SETTING_RECORDING_MODE, Settings.SETTING_RECORDING_MODE_DEFAULT); cv.put(Settings.SETTING_PREVIEW_ENABLED, Settings.SETTING_PREVIEW_ENABLED_DEFAULT); cv.put(Settings.SETTING_PICTURE_RESOLUTION_X, Settings.SETTING_PICTURE_RESOLUTION_X_DEFAULT); cv.put(Settings.SETTING_PICTURE_RESOLUTION_Y, Settings.SETTING_PICTURE_RESOLUTION_Y_DEFAULT); cv.put(Settings.SETTING_VIDEO_RESOLUTION_X, Settings.SETTING_VIDEO_RESOLUTION_X_DEFAULT); cv.put(Settings.SETTING_VIDEO_RESOLUTION_Y, Settings.SETTING_VIDEO_RESOLUTION_Y_DEFAULT); cv.put(Settings.SETTING_VIDEO_FPS, Settings.SETTING_VIDEO_FPS_DEFAULT); cv.put(Settings.SETTING_AUDIO_BITRATE_KBPS, Settings.SETTING_AUDIO_BITRATE_KBPS_DEFAULT); cv.put(Settings.SETTING_STORE_TO_SD, Settings.SETTING_STORE_TO_SD_DEFAULT); cv.put(Settings.SETTING_STORAGE_LIMIT_MB, Settings.SETTING_STORAGE_LIMIT_MB_DEFAULT); this.db.insert(Settings.SETTINGS_TABLE_NAME, null, cv); } The CREATE_SETTINGS_TABLE string is defined as the following: private static String CREATE_SETTINGS_TABLE = "CREATE TABLE IF NOT EXISTS " + Settings.SETTINGS_TABLE_NAME + "(" + Settings.SETTING_UNIQUE_ID + " TEXT NOT NULL PRIMARY KEY, " + Settings.SETTING_DEVICE_ID + " TEXT NOT NULL , " + Settings.SETTING_CONNECTION_PREFERENCE + " TEXT NOT NULL CHECK("+Settings.SETTING_CONNECTION_PREFERENCE+" IN("+Settings.SETTING_CONNECTION_PREFERENCE_ALLOWED+")), " + Settings.SETTING_AD_HOC_ENABLED + " TEXT NOT NULL CHECK("+Settings.SETTING_AD_HOC_ENABLED+" IN("+Settings.SETTING_AD_HOC_ENABLED_ALLOWED+")), " + Settings.SETTING_SERVER_ADDRESS + " TEXT NOT NULL, " + Settings.SETTING_RECORDING_MODE + " TEXT NOT NULL CHECK("+Settings.SETTING_RECORDING_MODE+" IN("+Settings.SETTING_RECORDING_MODE_ALLOWED+")), " + Settings.SETTING_PREVIEW_ENABLED + " TEXT NOT NULL CHECK("+Settings.SETTING_PREVIEW_ENABLED+" IN("+Settings.SETTING_PREVIEW_ENABLED_ALLOWED+")), " + Settings.SETTING_PICTURE_RESOLUTION_X + " TEXT NOT NULL, " + Settings.SETTING_PICTURE_RESOLUTION_Y + " TEXT NOT NULL, " + Settings.SETTING_VIDEO_RESOLUTION_X + " TEXT NOT NULL, " + Settings.SETTING_VIDEO_RESOLUTION_Y + " TEXT NOT NULL, " + Settings.SETTING_VIDEO_FPS + " TEXT NOT NULL, " + Settings.SETTING_AUDIO_BITRATE_KBPS + " TEXT NOT NULL, " + Settings.SETTING_STORE_TO_SD + " TEXT NOT NULL CHECK("+Settings.SETTING_STORE_TO_SD+" IN("+Settings.SETTING_STORE_TO_SD_ALLOWED+")), " + Settings.SETTING_STORAGE_LIMIT_MB + " TEXT NOT NULL )"; However, when I execute my insert, I always get: 03-19 19:37:36.974: ERROR/Database(386): Error inserting server_address='0.0.0.0' storage_limit='-1' connection='none' preview_enabled='0' sd_enabled='1' video_fps='15' audio_bitrate='96' device_id='-1' recording_mode='none' picture_resolution_x='-1' picture_resolution_y='-1' unique_id='000000000000000' adhoc_enable='0' video_resolution_x='320' video_resolution_y='240' 03-19 19:45:34.284: ERROR/Database(446): android.database.sqlite.SQLiteConstraintException: error code 19: constraint failed It seems as if all the columns in my insert are not null. The row's primary key HAS to be unique, because it's the only row in the table. Therefore, the only thing I can think of is my CHECK conditions aren't true. Here are the predefined strings I'm using: public static final String SETTING_UNIQUE_ID = "unique_id"; public static final String SETTING_DEVICE_ID = "device_id"; public static final String SETTING_DEVICE_ID_DEFAULT = "'-1'"; public static final String SETTING_CONNECTION_PREFERENCE = "connection"; public static final String SETTING_CONNECTION_PREFERENCE_3G = "'3g'"; public static final String SETTING_CONNECTION_PREFERENCE_WIFI = "'wifi'"; public static final String SETTING_CONNECTION_PREFERENCE_NONE = "'none'"; public static final String SETTING_CONNECTION_PREFERENCE_ALLOWED = SETTING_CONNECTION_PREFERENCE_3G+","+SETTING_CONNECTION_PREFERENCE_WIFI+","+SETTING_CONNECTION_PREFERENCE_NONE; public static final String SETTING_CONNECTION_PREFERENCE_DEFAULT = SETTING_CONNECTION_PREFERENCE_NONE; public static final String SETTING_AD_HOC_ENABLED = "adhoc_enable"; public static final String SETTING_AD_HOC_ENABLED_ALLOWED = TRUE+","+FALSE; public static final String SETTING_AD_HOC_ENABLED_DEFAULT = FALSE; public static final String SETTING_SERVER_ADDRESS = "server_address"; public static final String SETTING_SERVER_ADDRESS_DEFAULT = "'0.0.0.0'"; public static final String SETTING_RECORDING_MODE = "recording_mode"; public static final String SETTING_RECORDING_MODE_VIDEO = "'video'"; public static final String SETTING_RECORDING_MODE_AUDIO = "'audio'"; public static final String SETTING_RECORDING_MODE_PICTURE = "'picture'"; public static final String SETTING_RECORDING_MODE_NONE = "'none'"; public static final String SETTING_RECORDING_MODE_ALLOWED = SETTING_RECORDING_MODE_VIDEO+","+SETTING_RECORDING_MODE_AUDIO+","+SETTING_RECORDING_MODE_PICTURE+","+SETTING_RECORDING_MODE_NONE; public static final String SETTING_RECORDING_MODE_DEFAULT = SETTING_RECORDING_MODE_NONE; public static final String SETTING_PREVIEW_ENABLED = "preview_enabled"; public static final String SETTING_PREVIEW_ENABLED_ALLOWED = TRUE+","+FALSE; public static final String SETTING_PREVIEW_ENABLED_DEFAULT = FALSE; public static final String SETTING_PICTURE_RESOLUTION_X = "picture_resolution_x"; public static final String SETTING_PICTURE_RESOLUTION_X_DEFAULT = "'-1'"; public static final String SETTING_PICTURE_RESOLUTION_Y = "picture_resolution_y"; public static final String SETTING_PICTURE_RESOLUTION_Y_DEFAULT = "'-1'"; public static final String SETTING_VIDEO_RESOLUTION_X = "video_resolution_x"; public static final String SETTING_VIDEO_RESOLUTION_X_DEFAULT = "'320'"; public static final String SETTING_VIDEO_RESOLUTION_Y = "video_resolution_y"; public static final String SETTING_VIDEO_RESOLUTION_Y_DEFAULT = "'240'"; public static final String SETTING_VIDEO_FPS = "video_fps"; public static final String SETTING_VIDEO_FPS_DEFAULT = "'15'"; public static final String SETTING_AUDIO_BITRATE_KBPS = "audio_bitrate"; public static final String SETTING_AUDIO_BITRATE_KBPS_DEFAULT = "'96'"; public static final String SETTING_STORE_TO_SD = "sd_enabled"; public static final String SETTING_STORE_TO_SD_ALLOWED = TRUE+","+FALSE; public static final String SETTING_STORE_TO_SD_DEFAULT = TRUE; public static final String SETTING_STORAGE_LIMIT_MB = "storage_limit"; public static final String SETTING_STORAGE_LIMIT_MB_DEFAULT = "'-1'"; public static final String SETTING_CLIP_LENGTH_SECONDS = "clip_length"; public static final String SETTING_CLIP_LENGTH_SECONDS_DEFAULT = "'300'"; Does anyone see what could be going on? I'm stumped. Thanks in advance.

  Read the article

• Is it still cheaper to build your own PC?

  - by Jeff Yates

  With many companies offering build-to-order PCs, where they can source components at bulk purchase prices, is there any value in building your own PC. Is it still a good option for everyone or is it only cost-effective for those building fringe equipment like high spec gaming platforms? Don't forget to factor in the time and effort you spend building and configuring the machine. I know that it is often worthwhile as it builds understanding of your machine, gets you exactly what you want, etc., but is it still good for your wallet or would you be better off paying someone else to do it and spend more time doing something else?

  Read the article

• Too much memory consumed during TFS automated build

  - by Bernard Chen

  We're running TFS 2010 Standard Edition, and we've set up an automated build to run whenever someone checks in code. We run through all of the automated tests (built with MSTest) as part of the build. We've configured the build to run the tests as a 64-bit process, but the QTAgent.exe that runs the tests grows in memory while the tests are running. It is currently reaching 8GB for the ~650 tests we have, and the process has slowed significantly when we went from 450 tests to 650 tests. When we run all of the tests in the local development environment, memory seems to be freed at least with each TestClass and never exceeds a certain level. The process of running all tests has not increased significantly in the local development environment. Is there a way to configure the build service to free up memory with each Test or each TestClass? With the way things are currently running, the build process gets very slow when we start to run out of memory on the machine. Edit: I found the MSTest invocation in the build log and ran it manually and saw the same behavior of runaway memory. I removed the /publish, /publishbuild, /teamproject, /platform, and /flavor parameters from the invocation of MSTest, in case the test runner was holding onto results until the end, but the behavior didn't change. I ran the same command line on a dev box, separate from the build server, and the memory freed up frequently. It seems there must be something wrong/different about the build server that is causing it to behave different, but I'm stumped where to look. I've looked at qtagent.exe.config, mstest.exe.config, versions of both executables. What else might affect this?

  Read the article

• Windows Updates settings issue!

  - by Kumi

  Hi, it's my first post here, don't wanna make it long, but I got a problem with my 'Windows Update' it won't show its setting's options. It only shows these settings: Important Updates, Recommended Updates and Who can install updates, it removed the other setting sections like 'Microsoft Updates' "Give me updates for Microsoft products and check for new optional Microsoft software when I update windows" or the last settings section 'Software notification' "Show me detailed notifications when new Microsoft software is available" Here's a screenshot of my Windows Update: http://img96.imageshack.us/img96/1963/windowsupdatescreenshot.png And here's how it was before and how should be: h**p://www.sevenforums.com/attachments/tutorials/3523d1242168648-windows-update-settings-change-wu_settings.jpg Thanks. PS: I'm running windows 7 RTM

  Read the article

• Disable Network settings (TCP/IP & DNS) on Windows 7 Ultimate

  - by TiD91

  i also read this discussion here How to disable Tcp/Ip settings in windows 7 via GPO? about what i want to do but i still have problems. So here i am: i have a desktop pc with two accounts, both with Administrative rights. One is used by the entire my family, in particular by my brother. The problem is that i set some DNS and IP configurations to let be possible the VNC connection from remote. Now i would like to disable the network settings (TCP/IP and DNS) to prohibit my brother to change it preventing me to connect to it. So how can i do this? I set the policies from GPO but i still can change these settings from his account. Here's a pic of Registry Keys: http://imageshack.us/a/img339/3310/famigliapc2012092017274.png what didn't i do? Thanks in advance for your help. Rub|TiD

  Read the article

• Versioning and Continuous Integration with project settings files

  - by Michael Stephenson

  I came across something which was a bit of a pain in the bottom the other week. Our scenario was that we had implemented a helper style assembly which had some custom configuration implemented through the project settings. I'm sure most of you are familiar with this where you end up with a settings file which is viewable through the C# project file and you can configure some basic settings. The settings are embedded in the assembly during compilation to be part of a DefaultValue attribute. You have the ability to override the settings by adding information to your app.config and if the app.config doesn’t override the settings then the embedded default is used. All normal C# stuff so far… Where our pain started was when we implement Continuous Integration and we wanted to version all of this from our build. What I was finding was that the assembly was versioned fine but the embedded default value was maintaining the non CI build version number. I ended up getting this to work by using a build task to change the version numbers in the following files: App.config Settings.settings Settings.designer.cs I think I probably could have got away with just the settings.designer.cs, but wanted to keep them all consistent incase we had to look at the code on the build server for some reason. I think the reason this was painful was because the settings.designer.cs is only updated through Visual Studio and it writes out the code to this file including the DefaultValue attribute when the project is saved rather than as part of the compilation process. The compile just compiles the already existing C# file. As I said we got it working, and it was a bit of a pain. If anyone has a better solution for this I'd love to hear it

  Read the article

• How do I include the Django settings file?

  - by alex

  I have a .py file in a directory , which is inside the Django project folder. I have email settings in my settings.py, but this .py file does not import that file. How can I specify to Django that settings.py should be used , so that I can use EmailMessage class with the settings that are in my settings.py?

  Read the article

• settings file vs app.config

  - by fearofawhackplanet

  I'm not really understanding the interaction/differences between settings and config files. If I add an entry to the settings file, it gets added to the app.config as well. Does this mean that changing the value in the app.config will update the settings? If not, how do I update settings in a live application? What's the general purpose of using a settings file instead of putting things directly in app.config?

  Read the article

• Building InstallShield based Installers using Team Build 2010

  - by jehan

  Last few weeks, I have been working on Application Packaging stuff using all the widely used tools like InstallShield, WISE, WiX and Visual Studio Installer. So, I thought it would be good to post about how to Build the Installers developed using these tools with Team Build 2010. This post will focus on how to build the InstallShield generated packages using Team Build 2010. For the release of VS2010, Microsoft has partnered with Flexera who are the makers of InstallShield to create InstallShield Limited Edition, especially for the customers of Visual Studio. First Microsoft planned to release WiX (Windows Installer Xml) with VS2010, but later Microsoft dropped  WiX from VS2010 due to reasons which are best known to them and partnered with InstallShield for Limited Edition. It disappointed lot of people because InstallShield Limited Edition provides only few features of InstallShield and it may not feasable to build complex installer packages using this and it also requires License, where as WiX is an open source with no license costs and it has proved efficient in building most complex packages. Only the last three features are available in InstallShield Limited Edition from the total features offered by InstallShield as shown in below list.                                                                                            Feature Limited Edition for Visual Studio 2010 Standalone Build System Maintain a clean build machine by using only the part of InstallShield that compiles the installations. InstallShield Best Practices Validation Suite Avoid common installation issues. Try and Die Functionality RCreate a fully functional trial version of your product. InstallShield Repackager Create Windows Installer setups from any legacy installation. Multilingual Support Present installation text in up to 35 languages. Microsoft App-V™ Support Deploy your applications as App-V virtual packages that run without conflict. Industry-Standard InstallScript Achieve maximum flexibility in your installations. Dialog Editor Modify the layout of existing end-user dialogs, create new custom dialogs, and more. Patch Creation Build updates and patches for your products. Setup Prerequisite Editor Easily control prerequisite restart behavior and source locations. String Editor View Control the localizable text strings displayed at run time with this spreadsheet-like table. Text File Changes View Configure search-and-replace actions for content in text files to be modified at run time. Virtual Machine Detection Block your installations from running on virtual machines. Unicode Support Improve multi-language installation development. Support for 64-Bit COM Extraction Extract COM data from a 64-bit COM server. Windows Installer Installation Chaining Add MSI packages to your main installation and chain them together. XML Support Save time by quickly testing XML configuration changes to installation projects. Billboard Support for Custom Branding Display Adobe Flash billboards and other graphic files during the install process. SaaS Support (IIS 7 and SSL Technologies) Easily deploy Windows-based Web applications. Project Assistant Jumpstart a project by using a simplified set of views. Support for Digital Signatures Save time by digitally signing all your files at build time. Easily Run Custom Actions Schedule a custom action to run at precisely the right moment in your installation. Installation Prerequisites Check for and install prerequisites before your installation is executed. To create a InstallShield project in Visual Studio and Build it using Team Build 2010, first you have to add the InstallShield Project template  to your Solution file. If you want to use InstallShield Limited edition you can add it from FileàNewà project àother Project Types àSetup and Deploymentà InstallShield LE and if you are using other versions of InstallShield, then you have to add it from  from FileàNewà project àInstallShield Projects. Here, I’m using  InstallShield 2011 Premier edition as I already have it Installed. I have created a simple package for TailSpin Application which has a Feature called Web, few components and a IIS Web Site for  TailSpin application.   Before started working on this, I thought I may need to build the package by calling invoke process activity in build process template or have to create a new custom activity. But, it got build without any changes to build process template. But, it was failing with below error message. C:\Program Files (x86)\MSBuild\InstallShield\2011\InstallShield.targets (68): The "InstallShield.Tasks.InstallShield" task could not be loaded from the assembly C:\Program Files (x86)\MSBuild\InstallShield\2010Limited\InstallShield.Tasks.dll. Could not load file or assembly 'file:///C:\Program Files(x86)\MSBuild\InstallShield\2011\InstallShield.Tasks.dll' or one of its dependencies. An attempt was made to load a program with an incorrect format. Confirm that the <UsingTask> declaration is correct, that the assembly and all its dependencies are available, and that the task contains a public class that implements Microsoft.Build.Framework.ITask. This error is due to 64-bit build machine which I’m using. This issue will be replicable if you are queuing a build on a 64-bit build machine. To avoid this you have to ensure that you configured the build definition for your InstallShield project to load the InstallShield.Tasks.dll file (which is a 32-bit file); otherwise, you will encounter this build error informing you that the InstallShield.Tasks.dll file could not be loaded. To select the 32-bit version of MSBuild, click the Process tab of your build definition in Team Explorer. Then, under the Advanced node, find the MSBuild Platform setting, and select x86. Note that if you are using a 32-bit build machine, you can select either Auto or x86 for the MSBuild Platform setting.  Once I did above changes, the build got successful.

  Read the article

• JDK8 New Build Infrastructure

  - by kto

  I unintentionally posted this before I verified everything, so once I have verified it all works, I'll updated this post. But this is what should work... Most Interesting Builder in the World: "I don't always build the jdk, but when I do, I prefer The New JDK8 Build Infrastructure. Stay built, my friends." So the new Build Infrastructure changes have been integrated into the jdk8/build forest along side the older Makefiles (newer in makefiles/ and older ones in make/). The default is still the older makefiles. Instructions can be found in the Build-Infra Project User Guide. The Build-Infra project's goal is to create the fastest build possible and correct many of the build issues we have been carrying around for years. I cannot take credit for much of this work, and wish to recognize the people who do so much work on this (and will probably still do more), see the New Build Infrastructure Changeset for a list of these talented and hard working JDK engineers. A big "THANK YOU" from me. Of course, every OS and system is different, and the focus has been on Linux X64 to start, Ubuntu 11.10 X64 in particular. So there are at least a base set of system packages you need. On Ubuntu 11.10 X64, you should run the following after getting into a root permissions situation (e.g. have run "sudo bash"): apt-get install aptitude aptitude update aptitude install mercurial openjdk-7-jdk rpm ssh expect tcsh csh ksh gawk g++ build-essential lesstif2-dev Then get the jdk8/build sources: hg clone http://hg.openjdk.java.net/jdk8/build jdk8-build cd jdk8-build sh ./get_source.sh Then do your build: cd common/makefiles bash ../autoconf/configure make We still have lots to do, but this is a tremendous start. -kto

  Read the article

• How to not increment the build.number in Ant?

  - by dacracot

  I have many targets in my build.xml for Ant. Generally I am running two via a shell script, one to construct the application and one for cleaning up. The shell script checks the exit status of the construction to see if it should clean up or leave the clutter behind so I can determine what went wrong and fix it. So went all is going well, the majority of the time, Ant is executed once for construction and once for clean up. This results in my build.number being incremented for each execution. So in steady state, my build.number increments by 2. How can a tell Ant to not increment the build.number? I would do this for clean up as I haven't built anything. I know the obvious answer of creating a separate script for clean up only, but I'd rather keep the entire build.xml in one file.

  Read the article

• How can I add settings in the settings application for the iPhone

  - by Eytan

  I have my user preferences set to display in the system-settings application BUT I want to give them the option of adding additional settings. Specifically, the user has a group 'favorites' in the settings bundle and they then can put in the details of their three favorite contacts. However, I want to give the user the option of adding more. I know how to do this with inapp but can this be done through the settings application?

  Read the article

• ubuntu mouse settings

  - by user1

  is there a way to import windows mouse settings to ubuntu 10.04. I really love ubuntu but my laptop touchpad is driving me crazy. for e.g. I can not seem to drag the window frame properly etc... It is not a driver issue I know this for sure. I think I am accustomed to windows mouse settings. Please if you have a setting that works really well can you share it.

  Read the article

• What are "build-essential" & "build-dep"?

  - by Adam Siddhi

  I am researching how to install Ruby 1.9.1 in Xubuntu 10.04 and I came across the command build-essential and build-dep multiple times. Sometimes it is followed by packages and sometimes it is both preceded and post-ceded by packages. The 2 examples I am looking at are: sudo apt-get install build-essential zlib1g zlib1g-dev zlibc libruby1.9 libxml2 libxml2-dev libxslt-dev sudo apt-get build-dep ruby1.9 and sudo apt-get install ruby irb ri rdoc ruby1.8-dev libzlib-ruby libyaml-ruby libreadline-ruby libncurses-ruby libcurses-ruby libruby libruby-extras libfcgi-ruby1.8 build-essential libopenssl-ruby libdbm-ruby libdbi-ruby libdbd-sqlite3-ruby sqlite3 libsqlite3-dev libsqlite3-ruby libxml-ruby libxml2-dev

  Read the article

• Best build dir location to use in Xcode

  - by neoneye

  I'm consolidating my Xcode/TextMate setup and is interested in where you put your build dir. Some years ago I started out having the build dir in the same dir as my xcodeproj file. However it became a mess when my project became a multi project with a applications and frameworks and tests, so I started using ../build as the build dir, so that all the sub projects used the same dir. However Spotlight is indexing this build dir and TextMate's global find is unusable when there is a build dir in the project. I'm thinking either using ~/.build or /build as Xcode's build dir. What build dir do you use and why?

  Read the article

• What to store at application Settings, numeric / string representations or objects?

  - by SoMoS

  Hello, I've been thinking for a while on what to store at the Project Settings, objects or numeric/string representations of those objects to set a rule and avoid thinking on this at the future so I want to take the best approach. On one side storing object representations grants you that what is stored is valid and saves you from doing conversions each time you access them. You only need objects with the attribute. At the other side storing the numeric/string representation of an object eases the editing of the setting because at the end the user will be entering numeric or string information. What do you do with this issue?

  Read the article

• Storing user settings in table - how?

  - by Mdillion

  I have settings for the user about 200 settings, these include notice settings and tracing settings from user activities on objects. The problem is how to store it in the DB? Should each setting be a row or a column? If colunm then table will have 200 colunms. If row then about 3 colunms but 200 rows per user x even 10 million users = not good. So how else can i store all these settings? NOTE: these settings are a mix of text entry and FK lookups to other tables. Thanks.

  Read the article

• How to Recursively Delete wildcard files in TFS Build?

  - by Chris Arnold

  I want to recursively delete files that match a certain pattern as part of my post-build cleanup routines in TFS Build. I've tried this... <Delete Files="T:\DeploymentDir\**\A*" /> No errors in the build, but it doesn't work.

  Read the article

• What's the ROI of using a build tool like ant or nant?

  - by leeand00

  To me this sounds like a really stupid question. Why would you not use a build tool? However, I need to explain my co-worker why he should be using a build tool of some sort. He's getting really into the idea of working as a team with more programmers, but he isn't understanding the bigger picture of what needs to change in the build process in order to work with a larger team; (i.e. defensive programming/unit testing your code, having a bug database, programming modular libraries, and using sub-repositories to store modules in version control. This is a rather large stack of technologies that I need to prove the ROI of...so I figured I'd start with the ROI of using a build tool rather than just...say...clicking compile.

  Read the article

• How do you use build labels in publishers in cruisecontrol?

  - by Omnifarious

  I have this section in my CruiseControl config.xml file: <publishers> <onsuccess> <artifactspublisher dest="artifacts/${project.name}" file="projects/${project.name}/fred"/> <execute command="hg -R hg-succeeded/${project.name} pull"/> <execute command="hg -R hg-succeeded/${project.name} tag -l build-${label} -r tip"/> </onsuccess> </publishers> I'm getting tags that look like build-${label}. The ${label} part isn't being replaced by the build label like I expect. I'm expecting something like build.1 to show up in place of ${label}. How do I make this happen? I do have the default labelincrementer configured with a <labelincrementer /> tag in my project. Also, the CruiseControl documentation is absolutely awful. Is there better documentation anywhere?

  Read the article

• C# Custom user settings class not saving

  - by Zenox

  I have the following class: [Serializable] [XmlRoot ( ElementName = "TextData", IsNullable = false)] public class TextData { private System.Drawing.Font fontColor; [XmlAttribute ( AttributeName = "Font" )] public System.Drawing.Font Font { get; set; } [XmlAttribute ( AttributeName = "FontColor" )] public System.Drawing.Color FontColor { get; set; } [XmlAttribute ( AttributeName = "Text" )] public string Text { get; set; } public TextData ( ) { } // End of TextData } // End of TextData And Im attempting to save it with the following code: // Create our font dialog FontDialog fontDialog = new FontDialog ( ); fontDialog.ShowColor = true; // Display the dialog and check for an ok if ( DialogResult.OK == fontDialog.ShowDialog ( ) ) { // Save our changes for the font settings if ( null == Properties.Settings.Default.MainHeadlineTextData ) { Properties.Settings.Default.MainHeadlineTextData = new TextData ( ); } Properties.Settings.Default.MainHeadlineTextData.Font = fontDialog.Font; Properties.Settings.Default.MainHeadlineTextData.FontColor = fontDialog.Color; Properties.Settings.Default.Save ( ); } Everytime I load the the application, the Properties.Settings.Default.MainHeadlineTextData is still null. Saving does not seem to take effect. I read on another post that the class must be public and it is. Any ideas why this would not be working properly?

  Read the article

• Using the “Settings.settings” functionalities in VB.NET can be tricky…

  - by Vincent Grondin

  Sometime you’re searching for something forever and when you find it, you realize it was right under your nose.  Maybe you were distracted by other things around… or maybe that thing right under your nose was so well hidden that it deserves a blog post…   That happened to me a few days ago while using the “Settings.settings” functionalities in my VB.NET application…  I thought it was a cool feature and I decided to use it…  So there I am adding new settings with “USER” scope and StringCollection as the data type, testing my application and everything works perfectly fine...  That was before I decided to modify the “Value” of one of my settings…  After changing the value of one of my settings, I start my application again and, to my surprise, my new values aren’t showing!  Hmmm… That’s odd…  My setting was a pretty long list of strings so I was rather angry at myself for not saving my work after I was done…  So I open up the Settings.setting in the designer and click the ellipsis symbol to enter my string collection again, but to my great pleasure (and disbelief) my strings are there!!!  Alright, you rock VB.NET!  You’ve just save me a bunch of typing time and I’m thinking it’s just a simple Visual Studio glitch…  I hit “Save” then “Save All” (just in case) and finally I rebuild everything and fire up my app once again.  Huh?  Where are my darn strings????????  Ok there’s a bug there…  I open up the app.config and my new strings are there!!!  Alright, let’s recap…  My new strings are in the app.config, they show correctly in the Settings.settings designer UI but they aren’t showing at runtime…  Hmmmm?  Let’s try something else…  Let’s start the application but outside Visual Studio this time… I fire up the exe and BAM!  My strings where there!  I “alt-tab” and hit “F5” and BOOM, no strings!  So it’s a bug in the Visual Studio environment… or could it be a FEATURE?  I must admit that I’m a little confused over what’s a bug and what’s a feature in Visual Studio… lol!   Finally I found out there’s a “cache” for your Visual Studio located here:  C:\Users\<your username>\AppData\Local\Microsoft\<your app name and a very weird temp ID>\<your app version>\user.config When using the “Settings.settings” with a setting of scope “user”, this file is out of sync with your app.config until you manually decide to update it… The button is right there… under your nose… at the top left corner of your screen in the settings designer…  See the big “Synchronize” button there?  Yep…  Now that’s user friendly isn’t it?  Oh, and wait until you see what it does when you click it…  It prompts you and basically says:  “Would you like your settings to start working inside Visual Studio now that you found out that I exist?” and of course the right answer is yes… or rather “OK”…  Unfortunately, you have to do this every time you edit a value… On the other hand, adding and removing settings seem to work flawlessly without having to click this magical button… go figure!  Oh and I almost forgot… this great “feature” is only available for VB.NET…  A project in C# using Settings.settings will work perfectly EVEN when editing values… Here’s a screenshot that shows this important button: Button Using other data types appears to work perfectly well…   Maybe it’s simply related to the StringCollection data type?  If you are a VB.NET programmer, you should pay attention to this when you plan on using the settings functionalities and your scope is “user” and your data type is StringCollection… Happy coding all!

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >