Search Results

Search found 11107 results on 445 pages for 'drive bay'.

Page 6/445 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

  • Pen drive cannot be mounted

    - by DUKE
    I get the following message when I insert my pen drive to USB port. I am unable to format it as well. (This pen drive earlier used as a bootable drive for Ubuntu 12.04) I am using Ubuntu 12.04 LTS. lsusb command in the terminal gives the following message: siva@siva:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0424:2513 Standard Microsystems Corp. Bus 002 Device 002: ID 0424:2513 Standard Microsystems Corp. Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 001 Device 004: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory Bus 002 Device 003: ID 05ac:8242 Apple, Inc. IR Receiver [built-in] Bus 002 Device 004: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 001 Device 007: ID 05ac:8281 Apple, Inc. Bus 001 Device 008: ID 0951:1653 Kingston Technology

    Read the article

  • Disk failure is imminent Laptop Hard drive ~5 months old

    - by Drew
    There's another post about this, but I don't have enough 'points' to say anything on that thread. So I'll start my own ... with more details! My computer still boots, but gnome domain reports problems with HDD smart. This has been confirmed in the bios as it makes me press f1 to boot up now. I tried running HDD disk check in the bios, but it fails running the tests. As in, running the tests failed not that the tests themselves indicated a failed drive. Here is what disk utility is reporting as failing: Reallocated Sector Count FAILING Normalized: 132 Worst: 132 Threshold: 140 Value: 544 Current Pending Sector Count WARNING Normalized: 200 Worst: 1 Threshold: 0 Value: 2 Is this related to the insane number of DRDY errors on the drive? kernel: [51345.233069] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51345.233076] ata1.00: BMDMA stat 0x4 kernel: [51345.233081] ata1.00: failed command: READ DMA kernel: [51345.233090] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51345.233092] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51345.233097] ata1.00: status: { DRDY ERR } kernel: [51345.233103] ata1.00: error: { UNC } kernel: [51345.291929] ata1.00: configured for UDMA/100 kernel: [51345.291944] ata1: EH complete kernel: [51347.682748] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51347.682754] ata1.00: BMDMA stat 0x4 kernel: [51347.682759] ata1.00: failed command: READ DMA kernel: [51347.682768] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51347.682770] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51347.682774] ata1.00: status: { DRDY ERR } kernel: [51347.682777] ata1.00: error: { UNC } Did Ubuntu 10.10 and/or EXT4 eat my work laptop? What steps can I take to backup my important information, which is probably the home folder. Please include steps to recover my data on the new hard drive as well. It does me little good to have backups I can't use.

    Read the article

  • Google Drive Update keeps throwing an error when I try to save a thumbnail

    - by Dano64
    The Base64 string checks out fine. I was able to export it to another website and download it again as my image. When I try to do an update using the Drive Javascript api, it just keeps returning this error: Invalidvaluefor:Notavalidbase64bytestring I also true making the string URL safe. Per this page https://google-api-client-libraries.appspot.com/documentation/drive/v2/python/latest/drive_v2.files.html Am I doing something wrong here, the documentation says send Base64, the string is valid and, the string is intact throughout the process, but Google will not accept it? I am using the javascript api, I think there is maybe a bug sending the thumbnail using the javascript api. This is the request Request URL:https://www.googleapis.com/upload/drive/v2/files/?uploadType=multipart Request Method:POST Status Code:400 Bad Request **Request Headers** :host:www.googleapis.com :method:POST :path:/upload/drive/v2/files/?uploadType=multipart :scheme:https :version:HTTP/1.1 accept:*/* accept-encoding:gzip,deflate,sdch accept-language:en-US,en;q=0.8 authorization:Bearer ya29.AHES6ZQr...YXDacdY4 content-length:14313 content-type:multipart/mixed; boundary="--mpart_delim" origin:https://www.googleapis.com x-javascript-user-agent:google-api-javascript-client/1.1.0-beta x-origin:https://app.pinteract.com x-referer:https://app.pinteract.com **Query String Parameters** uploadType:multipart **Request Payload** ----mpart_delim Content-Type: application/json {"id":null,"title":"Test Pinup.pint","mimeType":"application/vnd.pinteract.pint","thumbnail":{"mimeType":"image/png","image":"iVBORw0KGgoAAAANSUh...UVORK5CYII%3D"}} ----mpart_delim Content-Type: application/vnd.pinteract.pint Content-Transfer-Encoding: binary { "header" : {"id":"215A660A"} "members" : [ {"id":"100523752012631912873"} ], "manifest" : [ {"id":"0000","ele":[],"own":"100523752012631912873","dtc":1371679680000,"txt":"&Delta; Created","typ":0} ], "elements" : [ {"id":"0F54","x":560,"y":264,"bak":"#44ff44","own":"100523752012631912873","srt":"544","sta":0,"wid":120,"hgt":120,"dtc":0,"rec":"","txt":"This is Note"} ] } ----mpart_delim-- **Response Headers** content-length:10848 content-type:application/json date:Mon, 01 Jul 2013 14:41:33 GMT server:HTTP Upload Server Built on Jun 25 2013 11:32:14 (1372185134) status:400 Bad Request version:HTTP/1.1 This is the Response { "error": { "errors": [ { "domain": "global", "reason": "invalid", "message": "Invalid value for: Not a valid base64 byte string: iVBORw0KGgoAAAANSUhEUg...AASUVORK5CYII%3D" } ], "code": 400, "message": "Invalid value for: Not a valid base64 byte string: iVBORw0KGgoAAAANSU...lRtkAAAAASUVORK5CYII%3D" } } Raw Base64 String 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"}],"code":400,"message":"Invalidvaluefor:Notavalidbase64bytestring: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 Url Encoded Base64 String iVBORw0KGgoAAAANSUhEUgAAAGAAAABgCAYAAADimHc4AAAAGXRFWHRTb2Z0d2FyZQBBZG9iZSBJbWFnZVJlYWR5ccllPAAADjVJREFUeNrsXX2MHVUVP3fevH27SxfKhyBCsIqoKOhCBBISY5Hyj2JSGuXLP6SJwYAYICgxsUBr1AhqbE2I8Q9jjYE%2FCLFbP4IxVbaIYjAmS0wUC6ELRGy7tPt2t9vd997MPd6Z%2B3Xunfsq1r7tvNe56TAfO2%2FezO93zu%2Fce%2B6ZB0DVqla1qlWtalWrWtWqVrWqVa1qJ1Nj%2FXCTm5%2BbHeUcz9%2B3f25tmvLVSYePIyLIBRhX24yxKXH63Kljw5Ni97UfbVhzpCLgGNs3%2Fjp%2F%2Fr9en72l3UnWCsCvSjrpmQA54Nkq28q3FQn5mucL5OuIsUPi6f5Si6KJVasaT26%2F%2BT1vVgS8hfbl3%2B27br65dE%2Br1VknrH6IIfkjolmh%2FA8hwYJv1lySInYXhXc8W49r235%2B%2ByVPVQQE2lee3n%2Fd3OzS5tZS%2B2oWurlMYgj4qI45HsApCZYAzgFSsU7FfhSx5%2BtxtHnnHR9%2BqiJAtPsnD1y4MLf09aXF9q3ZzTAmb8ohQaKtHEDLkGv9qIBHBbgmICXrlKyjKHoirkWbfn3X%2BEsnLQH37dr3mebs4o8x4WMSfGbAtyQoDSLga8BBeQJqqXE8QQIt12D2syVR2%2BLcxVpcu%2F23d1%2F%2B%2BElFwPdeXB555eWZ7x453LozEvuRtvqMgCyAhm7QyI7Sf7BEcI4mCNP9lBKhrD9R2zkJqVwLWfpOYyje8tSXLlsceAIy8Pf8Y98vOq1kXQZ8JG5By06kLZ%2F5%2Bm8DcEiCMt3XXpCTwN0YkKrYkFu%2F0CfpCSC3M1IEEeILJ0ca9et%2Fc%2FfliwNLQAb%2BSxR8JTkRJUAdy4DOtxCdQGyDb6ALyq0HuEHYyo%2BOAYlaUkVI7hkAk8ON%2BPpd935kceAIMOC3BfjiayUB1gO0FAG4QTjfN9pTjAO0%2F0%2B9ICeDBmGyJDQoEzIyjxCr3YKET%2F7%2BvitWhIRopQh4%2BZ%2F7fyAtX4PPQG%2FX1JLt19Rit8XfIjDb7uftdWqa0Ox8sNfIF%2FCvK4mPFAB6yf4uaPzYYit5dKVwWREC7vrV619sLXU%2BL8Gg4AEBlXgFBdN8JgQ6M%2BfUHJDJNWiQD1yHkXOlDLLMcz53xTf%2FdNtASNBXn5l598y%2B%2Bb%2BL3k2j5gFdU1KkA2%2FkdEOR9IDsOpSCQBN4M%2F3nJuCaOEC03pEhJTuJJ0XtbEHsxBG75PmvXb2nrz3gzZnD2wVCjQgYsUAgVm2lRwdiR6LA9w4lS2YNnlcRq%2FavB653MfrdnueJf%2FXllP%2BkryXozl%2B%2BtoF30o9GnoVrvZU9HtINNaD44BFgHSmx4DP%2FswRkKz9F3WcGCOt9NQ0MwtWXbnn2xr4loL2cbNYDLAdcQgTz9FpbtAaUERANsJEFklHvIOMISiBzrqlJD4w%2FyKJJEL2lh%2FqSgDt2vrohTdJL%2FQdzBlvMtUQ6Io6cXgwBngZWD%2FxIeZVeM49o5g30KEGh%2B1Td4g%2B8f%2FMfbuw7Atotbf0EVOchmQuGts5APsh4UNCbSBoDPE%2FoYt3B48zekzEIVF7Ae%2BcFPSHgCxOvXpwm%2FFLHslQ6GZgLfNfFk54iuMwhyAf2aJLTfcHg8cwLLnzwmQ%2F2DQFCem4pgOR4gzviLQDD3gIRzE1h%2BPshyaEB3wPYORccImVyUHR1P9s3BCSd9CZ%2FsOFPsjCV4ymkHViYCJOmYEV5co8xF1DnHrDwfe6cg1wzdZCRE8WY4tN9QYAY9Z4rBj7vzZNpiMWRHqJ5yKMCQcBg3cgJkpFPzjtkRw7x%2BruwqxQBkUxNnGgXXbBp8rzSE3BksT3uZDDJUJahD7hKsGFACug%2BCx8vegQWRtEsOOzHwO1h8WEQncOiSzpeegLaneQqB2wMEKHWGHhgigUzs2FYsHyAcNzonmfBgneZBfDoORk03nlF6QkQffCL3WdFM4uFSLUWHcuzTqPrTtCdkvSMlwb5ozZVPQHo3g8L%2BqgjOZ7t5HvHvScUH%2FceUMrPrmkTzW%2BagbRrZswIkXmGKHUbPWCQWDH6shUK8n4g9aVQGQFT3%2BkYguGdGAoWHOas0nsAqowlnbUyD%2BBPpoNX56M%2FR7wAzHkItjLCDaQO1gZXBOcQ3Tego4dzYAsBMBw5yukB8o6ZARiVZSs7l8e8NSOKr60euwRM39J1bZBZG%2FKsRTuxhRoE%2BQ6T3gZqNPk0pWUXsfwEaA%2FIHyQHX1sZM%2FCiY9OWLH0GJ66ZSwYJuoYgDxMj9QiFeiFbzIWGA3oOBKrvdIWF9j9Z8NUPHoBoQUVq7RJsbnpCTIFNgEeZUANFghmZogWeYVG6bAmirYqgJSwFItC3eNdwqIdwpN7SBx7A0YZdRCo1ECQiMlYvk3WcDJAi7QGBYAzepDyqSXlTpKXWEPAI7sQk7RmWJFPeqGXInNcHHtBKUhiJa%2FKBsoq0CBSwQJIENg2RP7AqyNIdpYhYnfYI9KYo%2FSlJWxdKSSHgBTyAQzfZcqc9OfGG0veC4ijaTcsEgdZskqo1W7%2FjVrbpEhL6N7kPzpwu99dqHljPDaNXqGuvby0cQyQpY%2BEK8BSsV4i2u%2FQecLjdmR4biq2Gc5WCZmgSXJwzKeYkqqKyfDqyjZT12VEtFrqZ6FTC0bJ0S7AGMD8PSB2R8RjrOUhK3FPQniIlSpAxXXoCFlrJ1Kp6rLScmVElU2gzf5TFbJIMzawYM8GWBXI4tEoaObrvB5A6UBMLPI8qWj6aLmdeyqjApx6QSqKmjjdePSlL%2BdQPX5gdjqPVea2OKqqyBVFuXZCukgOg9TvZMVuamGc3%2FRJFJAMsXqyOowW53CtF0UW6VtK4qpgGaIvtlrhOS6yz8hS5na2xefDha0%2Fvg4FYrsUT4v5vy1PD3JUfSjnKMZvt66PNxWA%2Bk8VtahjdHhCQFzVoebpTC0S2uV%2B2SOOCkSFl%2FWitPy9hlN4x0TcTMjOLrZ1GRwMFsno77yVxWjzlWqUTfNH%2Fu1to637GBT8%2Fjxbr6uCOhBR1TqplCKTscNDygzt7gVXPKuM%2B8ejUbKOWyRCt61TlHqYQihVKSY7%2Bloy0eqZAgkCRrl8d7b8Zk5rXlVSlnC5bF8dasiJOV8Zp6RHb0DzUA%2FnpmQfkwXi5s80CwF2rRbdc0PEQ9eJEwdqJ9yQFj%2BHBc5MA%2BNx5m9LuJ0R%2B8hhhJCgnd1uvcOoZAS%2Fsn9sqBmVNCnoIzAJwafdj%2BuUKnvKuwCeBgCutHozM%2BDEhUYDbNSgScu1vit2tfUfA%2FCPrmgvtRHqBM4gCByBOQKTAUPAl8FwAb4tpE97dS5JuZFNZUtadKsATQ4RYAIhHwLameJa%2BIyBrfzswv3WxI7yASIEPjvumilpS1xMK3UjHe3xC1DXQexmDyhEJwh2OLviuJwjgcWsvMep5efr4t55b%2F%2FZThnbk4wBw%2B%2F6F2n3wS0v8EnUyIYM0tex1Q8l26qUkUjViThT4HZSLDLyQB9%2BODLzZuTcI65%2FoawKyduW3%2F7zj9OH6%2BihEgDcA82t3GEBxMkQBqntFvPC%2BMDjdS5qm0IGWgt%2FRwKveT7Yvjk8I8G%2FoNTbxShDw4qHDGz901tia0bg2jirvo9fcIQC7lJ%2Bgk6RHPdEPUMhcOj9ZAMW353O5kgAroNU2pxKUpxw2rgQ2K%2FaS3jsf3D1%2B%2Fqrhp0fE2MCkIzwJ6lYy6Fu%2FJcCf8QqMB8Baf6JAT8i2lp9EyY441hSfuWbukXVTA0VATsIDu8fPO6Xx9HBGAi1NJ2XkAMUKtcKcJ523JeBz5ycLbMo5VUDbtZYgua%2FBF72fpvjMNc0VAn%2FFCcjaBQ9Mjr9jtJF7An1zhQZiO0VvM6VQSEdbDwCPACpDKenVpMbybW9Hb2ejXfHpFQX%2FhBCQk7Bpcvzs4aEdo3G0hr4fHEGoiNdNRdOUhEuElSOdTEvABt2EkNFx%2Bv3CCwCmUfZ4plYaixP2Yx2n3r9r9QWnNHasrsdrQ68KwX8hAOiEjJ421H18oGkFRQSXg6%2BO7gUZr4BJcYUbejnYKiUBuq3ZNHnPGY36Q42IrWYBL2B%2B4Szt%2F2vZAfJDTd6kigZeSw7J82R6v2X2kXVbT%2BTzl%2BIHm4Q3rDlnuP6Q6KbeVjfxAPWbis7NojcdqSfWubJ8riUIrAfo1ENiPAS2i2NbRE9n%2BkQ%2Fe6l%2Bsuw0QcSZwhtEL8kQQUvbTb0aLec0lk9Gv2AHYwkhQvzbLpYthx6%2Bdrosz1zKH%2B3LPGIsrq2PDu79%2FvA5F8p3igMEAFjZQV%2BCrCxNicM%2FFdY%2FUQaL7wsCdBsZGcH6GefB2EVXwsi574Pa294FSeM0aNVPpeMyFYQRhtrzEC0dgnTmFWi9sQcW9k5NLr2x5%2BPQm7ra%2FklF%2FF8WcngG4r1%2FhLG5F%2BHsQ%2BfA6OgoDDUaEMdx9rtv0vLTFNqdDrSWl2FhYQEOHNgPyeysCLOzzAsfpWsRDH5jZfb2gSQA3fQFKzMJJ4sHlJaEeFA9QHlB6G1YLFNMGGAPQPqMrKyeEMNgN5pg5V08AU6kNwwsASQQUy%2FnXdzkhElSPODgs4DMhkioPKA3RJgfvwoFCN6FkIqA4xwDQgTo90eSKgj3oHGe0q5oHBgVZwR0ql5Qz2MAhjwg%2B2O7Goj1VvtpD6jugb8AJUrMDagEcToSjgn48yCrzkvTBjYZx7khoK6e82AZgu5JQ4Bqi%2BoZ%2F10m3e8bAgSQE8dOQE7CJMh3e5fL%2BoylJiCKom3HSoBYDqdp%2BpjYLfX%2FTa%2FUBBw5cmSSMbb1WAhgLNqYJMnLZZfL0seAZrN5rwDzfyGhWa%2FXNx48%2BOaT%2FRCv%2BiIIT0%2FvvbfRaFwjvOFoMSErLdxeq9Uu27v3le390mFg0IftpptvXetURXDefPyxn01B1apWtapVrWpVq1rVqla1t9L%2BI8AAvydNUrElRtkAAAAASUVORK5CYII%3D

    Read the article

  • Unable to mount external hard drive - Damaged file system and MFT

    - by Khalifa Abbas Lame
    I get the following error when i try to mount my external hard drive. UNABLE TO MOUNT Error mounting /dev/sdc1 at /media/khalibloo/Khalibloo2: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdc1" "/media/khalibloo/Khalibloo2"' exited with non-zero exit status 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to read of MFT, mft=6 count=1 br=-1: Input/output error Failed to open inode FILE_Bitmap: Input/output error Failed to mount '/dev/sdc1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. It doesn't mount on windows either: "I/O Device error" it's an ntfs hard drive with a single partition Of course, i tried chkdsk /f. it reported several file segments as unreadable, but didn't say whether it fixed them or not (apparently not). also tried with the /b flag. ntfsfix reported the volume as corrupt. TestDisk was able to fix a small error with the partition table by adding the "80" flag for the active (only) partition. TestDisk also confirmed that the boot sector was fine and it matched the backup. However, when attempting to repair the MFT, it couldn't read the MFT. It also couldn't list the files on the hard drive. It says file system may be damaged. Active@ also shows that MFT is missing or corrupt. So how do i fix the file system? or the MFT?

    Read the article

  • Setting up a shared media drive

    - by Sam Brightman
    I want to have a shared media drive be transparently usable to all users, whilst also sticking to FHS and Ubuntu standards. The former takes priority if necessary. I currently mount it at /media/Stuff but /media is supposed to be for external media, I believe. The main issue is setting permissions so that access to read and write to the drive can be granted to multiple users working within the same directories. InstallingANewHardDrive seems both slightly confused and not what I want. It claims that this sets ownership for the top-level directory (despite the recursion flag): sudo chown -R USERNAME:USERNAME /media/mynewdrive And that this will let multiple users create files and sub-directories but only delete their own: sudo chgrp plugdev /media/mynewdrive sudo chmod g+w /media/mynewdrive sudo chmod +t /media/mynewdrive However, the group writeable bit does not seem to get inherited, which is troublesome for keeping things organised (prevents creation inside sub-folders originally made by another user). The sticky bit is probably also unwanted for the same reason, although currently it seems that one userA (perhaps the owner of the mount-point?) can delete the userB's files, but not vice-versa. This is fine, as long as userB can create files inside the directory of userA. So: What is the correct mount point? Is plugdev the correct group? Most importantly, how to set up permissions to maintain an organised media drive? I do not want to be running cron jobs to set permissions regularly!

    Read the article

  • Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

    - by andybjackson
    Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

    Read the article

  • Hard drive clicking noise on Acer AO722

    - by Blank
    I'm running Ubuntu 11.10 on an Acer Aspire One 722. Whenever I'm on battery power I get a clicking sound from my hard drive every 5 seconds or so (this does not happen when the laptop is plugged in). I'm dual booting with Windows 7 and I don't get the clicking sound in Windows. The clicking sound stops when I run the command:sudo hdparm -B 254 /dev/sda Also, according to:sudo smartctl -H /dev/sda my hard drive is healthy. Is this clicking sound something I can just ignore? Or is it a serious problem and will it eventually damage my computer? If so, how would I fix it? I have tried adding hdparm -B 254 /dev/sda to my /etc/rc.local file, but I still run into the clicking problem if my computer boots while plugged in and is then unplugged. Also, I'm finding this fix to be unreliable. Sometimes it works, sometimes it does not. Is this a good solution and is there a better way of doing this? Also, would running my laptop with a -B value of 254 have any negative effects? (I read somewhere about a lower level protecting the hard drive from bumps)

    Read the article

  • Windows XP consuming drive letters

    - by billdehaan
    This one's a bit of a stumper. I'm running XP SP3, current with all fixes, etc. My problem is that I can assign a drive letter to a container file (explained below), it works just fine. But once I close the container, the drive letter is no longer available until the next boot. I've got some confidential data that I've placed in a container volume. I've used TrueCrypt (www.truecrypt.com) and FreeOTFE (www.freeotfe.org), with both installed and portable versions for both, with the same result. I open the container file, assign it to a drive letter (say R:), and run some portable apps that are within the volume. When I'm done, I close the container, and the drive letter is released. Fine so far. However, when I attempt to re-open it, the previous drive letter (in this case R:) is no longer available. It's not mapped to anything, it's just unavailable. Even attempting something like "subst R: C:\" returns "Invalid Parameter - R:". I can use the S: drive, no problem, but the next day I have to use T:, then U:, etc. Eventually, I have to reboot to reclaim all of of the drive letters. Unfortunately, everything I've read about drive letters relates to USB assignments, which doesn't apply here. I've tried the "show hidden" command (set devmgr_show_nonpresent_devices=1) with no success. And the Disk Management tool doesn't apply either, since it's not a physical drive. Does anyone know where Windows keeps the list of drive letters? And is there anything short of a reboot that can be used to reset it?

    Read the article

  • Hard drive trouble trying to recover data

    - by DEmetria
    How to get my information off my old hard drive to my new one So I wanna know can anyone help me Laptop stop working and have me a hard disk error I finally got it to boot up again after playing with it, and I tried to copy my stuff and it froze on me and hasn't booted since Bought another hard drive and ended up making an image of my friends computer but couldn't get my stuff off my old drive so I tried the freezer method now and I put it in for two hours and it didn't boot but I'm putting it back in for 12hrs So my end result is I just wanna get my drive up enough to create an image of my CPU to my new hard drive and is there another way I could do it if my hard drive won't boot!! But here's the kickers when I made the image of my friends computerized up loaded it to the new hard drive and I have my old hard drive plugged up to an USB enclosure so I need help. Thanks in advance!!!

    Read the article

  • TrueCrypt & upgrading your hard drive?

    - by Danielb
    I currently use TrueCrypt to encrypt the hard drive in a Win7 laptop (everything in a single partition). I am looking to upgrade the hard drive to a model with significantly more storage capacity. I've had a look through the documentation but I couldn't see anything about this particular scenario. I assume I need to do something like the following: Remove the encryption from the existing drive. Clone the existing drive image onto the new hard drive. Physically install the new drive into the laptop. Resize the single partition to use all the space in the new drive. Encrypt all of the new bigger drive with TrueCrypt.

    Read the article

  • I have a password protected USB drive with hidden partition, how to convert to normal USB drive?

    - by deddebme
    I have a generic USB drive which has password protection, and I want to stop this password protection mechanism and to use it as a normal 8GB USB drive. I received this USB drive as a gift in Hong Kong, and there was no instruction menu whatsoever, not even the manufacturer name. When I plug the drive in Windows XP, the removable drive comes up as a read only 5.28MB partition with two files. When I try to add or remove any files or formatting it, it will says the drive is write protected. After launching the Login.exe and typed in the password, a 8GB read/writeable partition will be shown, and I'm free to do anything to it. But once after the drive is unplugged and replugged, the same read only partition will still comes out no matter what I did to the hidden partition. Anyone knows about this kind if USB drive? What did the manufacturer do to hide the partition? Is there a way to "low-level" formatting this drive to convert (or revert) it to a normal drive? Before typing in the password: After typing in the password:

    Read the article

  • Seagate 1TB 'EXPANSION' external hard drive, showing as BAD

    - by Dave Plews
    Hello! I have bough an external Seagate 1TB drive, which my XP system can see and will write files to, however when I use Partition Magic it describes the whole partition as BAD, and it is shown in yellow. All the options are greyed out. When I use Drive Image XML to try and copy drive to drive (I want a comlplete copy of my C drive including OS), I get an error message saying it can't lock the drive. The external drive is brand new and uses NTFS. Any ideas? Seagate 'support' haven't bothered getting back to me. Incidentally, I have another external drive (320GB), which uses FAT32 and Partition Magic sees that fine. I am doing a full format of the Seagate at the moment, to see if this helps. Thanks in advance!

    Read the article

  • Disc drive busy on MacBook, with disc stuck inside.

    - by ayaz
    I have a white MacBook, running Snow Leopard, 10.6.3 with the latest updates. I popped in a DVD that the system failed to mount. I did not see any conspicuous errors. As a result of this failure, the DVD got stuck in the drive. Neither pressing the eject button on the keyboard nor running the diskutil eject command caused the DVD to come out. The commands drutil eject and drutil tray open could not get the DVD to budge at all. The 'mount' and 'eject' buttons on the window for Disk Utility are dimmed out, while it is written in the middle for the DVD drive that that particular disc drive is busy. This is not the first time this has happened with me. I know that I will ultimately have to resort to rebooting the system and holding down the eject button to get the DVD to come out. But, is there any workaround that does not involve rebooting the system and prying the disc out? The drive on this MacBook does not have a needle-pin reset button -- at least, I couldn't find it anywhere. Any help will be greatly appreciated. Many thanks.

    Read the article

  • Repointing iTunes library from failed external drive to local drive

    - by Andy White
    Up until recently I had my iTunes library on an external drive, but the drive was beginning to act up, so as a precaution, I copied all the media files onto my local hard-drive. My external drive is now completely dead, so I'm in a situation where iTunes is still looking for the files on my F: drive, but the drive is gone, so the library references are now all broken links. A complete copy of the library is on my C: drive, so I'm curious what would be the easiest way to repoint my library to the media files on C:? Should I just clear out my library in iTunes and just import the files from C:? Or is there a more automatic way? I don't think I can use the "Consolidate Library" function in iTunes, b/c I no longer have access to the original library media files.

    Read the article

  • How to Format a USB Drive in Ubuntu Using GParted

    - by Trevor Bekolay
    If a USB hard drive or flash drive is not properly formatted, then it will not show up in the Ubuntu Places menu, making it hard to interact with. We’ll show you how to format a USB drive using the tool GParted. Note: Formatting a USB drive will destroy any data currently stored on it. If you think that your USB drive is already properly formatted, but Ubuntu just isn’t picking it up, try unplugging it and plugging it back in to a different USB slot, or restarting your machine with the device plugged in on start-up. Open a terminal by clicking on Applications in the top-left of the screen, then Accessories > Terminal. GParted should be installed by default, but we’ll make sure it’s installed by entering the following command in the terminal: sudo apt-get install gparted To open GParted, enter the following command in the terminal: sudo gparted Find your USB drive in the drop-down box at the top right of the GParted window. The drive should be unallocated – if it has a valid partition on it, then you may be looking at the wrong drive. Note: Make sure you’re on the correct drive, as making changes on the wrong hard drive with GParted can delete all data on a hard drive! Assuming you’re on the right drive, right-click on the unallocated grey block and click New. In the window that pops up, change the File System to fat32 for USB Flash Drives, NTFS for USB Hard Drives that will be used in Windows, or ext3/ext4 for USB Hard Drives that will be used exclusively in Linux. Add a label if you’d like, and then click Add. Click the green checkmark and then the Apply button to apply the changes. GParted will now format your drive. If you’re formatting a large USB Hard Drive, this can take some time. Once the process is done, you can close GParted, and the drive will now show up in the Places menu. Clicking on the drive will mount it and open it in a File Browser window. It will also add a shortcut to the drive on the Desktop by default. Your USB drive is now ready to store your files! Similar Articles Productive Geek Tips Using GParted to Resize Your Windows Vista PartitionInstall an RPM Package on Ubuntu LinuxCreate a Persistent Bootable Ubuntu USB Flash DriveShare Ubuntu Home Directories using SambaCreate a Samba User on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

  • Running UBUNTU from a USB Flash drive on Acer

    - by Byron Blue
    I've made a bootable USB flash drive to run UBUNTU. The drive works fine on MOST laptops/computers I try: It does not want to start on my (favourite) Acer Aspire 5745 (Windows 7 64 bit). The opening screen has SYSLINUX 4.06 EDD 4.06-pre1 (...) and simply sits there. I was using UBUNTU 12.04.1 64 bit until I tried booting to the Acer this morning. I've tried booting to 10.04 as well (saw this as a fix on a discussion) with the same result. I really want to use the Acer for development and do not want to wipe my Windows 7 from the hard disk. Are there any solutions/answers?

    Read the article

  • Need Help Changing Owner of External HArd Drive

    - by Thomas Ballew
    My understanding of code is about zero. I can open a terminal window, and type commands that are given to me, but that's about it. If someone can help me with this question, and explain at a level I'm likely to understand, thanks. If not, thanks anyway. I have an external hard drive with two partitions. I bought this drive when my operating system was Apple, 10.5 or so, and it was formatted as HFS+ with that system. Now, connecting the HD to my Linux system, I can read files, but I have about 1.5 TB of space that I can't use, because I am not the owner of the file, so can't write to the HD. Short of reformatting the HD, is there a way for me to set the permissions for the HD so I can write to it? Again, thank you.

    Read the article

  • Ubuntu installer doesn't see internal hard drive on DELL Vostro 3360

    - by valk
    I just received a new DELL Vostro 3360, it has Windows 7 preinstalled. When it comes to the partition window I can't see the hard drive there. I see only /dev/sda or /dev/sdb (either one and in both cases it's a usb drive from which I'm installing). I tried every imaginable BIOS configuration. Tried to change the SATA mode to ATA, DHCI and more. EDIT: I tried to install with standard Ubuntu 12.04 32 bit, and 11.10 64 bit official versions. No luck. I'll appreciate any suggestion.

    Read the article

  • Which hard disk drive is which?

    - by djeikyb
    I want to know which hard disk drive corresponds to which device path. It's trivial to match the hard disk stats (brand, size) with the dev path, but I want more. I want to know which drive is which inside my case. What's a good way to go about getting this info? I would prefer not to tear apart my server to remove all the drives, then add back one by one. I am willing to preform reboots. The drives are inconveniently scrunched together in the case. The label information is hidden. I can open the case. Most disks are SATA, so theoretically hot swappable. So, Unplugging and tracing cables might help in answering.

    Read the article

  • Creating a bootable USB recovery drive to be used by someone who isn't computer savvy

    - by David
    I am looking for a way to prepare an image of an Ubuntu machine which would be bootable and installable in the easiest way possible. I'm actually preparing an Ubuntu machine for someone living far, and not computer savvy. If he ever has troubles with his installation, he could just put a USB drive in, boot the machine and everything would be resetted for him. I know there are many methods of creating/loading an image of a drive, but the ones I've found so far have complicated menus with several options to choose from, etc. Ideally, perhaps only asking a Yes/No question such as "Would you like to reinstall?" would be great. Does such a tool exist? Thank you in advance!

    Read the article

  • Save to Hard Drive instead of bootable USB

    - by WAM
    I followed the instructions on the Ubuntu website on how to put Ubuntu 12.04 on a USB and make it a bootable USB stick for windows. It worked fine and I can boot up and run Ubuntu, but every time I try to download software or change settings it tries to save it to the USB rather than the hard drive built into the computer. The USB doesn't have enough space so the download fails and in addition it doesn't retain setting changes so when I restart my computer all the settings return to default and anything I saved is gone. Is there any way to change things so that when I download software or change settings Ubuntu will save it to my hard drive instead of the USB?

    Read the article

  • Floppy Drive not recognised

    - by Art
    I am a newbie with Ubuntu during the past two weeks, and I believe, that I have made good progress so far. Current setup tasks are completed, like: "Wireless Network, Printer, Thunderbird + Firefox, e-mail", also my local weather station - all setup. Updated files and rearranged the desktop to my liking. The problem I have now is my floppy drive which is not recognized, but the activity light is shown on constantly. I have downloaded the "MakeFloppyDriveAvailableToEveryone" and i am confident that I can follow the instructions to change the floppy drive. However, I do not have an existing fd0 file in /dev/???, but only /dev/fd/ files 0 to 46. Please advise.

    Read the article

  • Making an SSD drive the primary boot/system drive

    - by David Ebbo
    [Not much of a hardware guy, so please excuse my ignorance :)] I just ordered an HP Pavilion Elite HPE-450t (desktop), which came with Win7 installed on the hard drive, using two partitions (C: and D:). Separately, I bought a 128GB SSD that I intend to use as my system drive. I got it in there and connected it, and right now, it's the J: drive (which was the first letter available in disk manager). My goal is for the SSD to get a clean OS install be the C: drive, and to clean out the other hard drive and make it D: (for misc data storage) Question #1: the motherboard has two SATA plugs. Does it matter which one I use for which drive? Question #2: what's the right way to install Win7 on the SSD in a way that it ends up being the C: drive? Do I need to switch some things around in the current Win7 that came with it, are can I do all that while installing Win7 on the SSD?

    Read the article

  • can't see second hard drive

    - by Todd K
    I had XP Pro installed, and then I installed 12.04 dual boot. System has 2 hard drives, c: (as in windows) is primarily OS stuff, and then E: is data/personal documents. XP can still see both drives as normal after the ubuntu install, but ubuntu can only see the windows C: drive. How can I access the second drive? I can't see any trace of it, using the little *nix know-how I have, which isn't much...any help is great! Thanks!

    Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >