Search Results

Search found 14157 results on 567 pages for 'drive failure'.

Page 6/567 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

  • Hard drive trouble trying to recover data

    - by DEmetria
    How to get my information off my old hard drive to my new one So I wanna know can anyone help me Laptop stop working and have me a hard disk error I finally got it to boot up again after playing with it, and I tried to copy my stuff and it froze on me and hasn't booted since Bought another hard drive and ended up making an image of my friends computer but couldn't get my stuff off my old drive so I tried the freezer method now and I put it in for two hours and it didn't boot but I'm putting it back in for 12hrs So my end result is I just wanna get my drive up enough to create an image of my CPU to my new hard drive and is there another way I could do it if my hard drive won't boot!! But here's the kickers when I made the image of my friends computerized up loaded it to the new hard drive and I have my old hard drive plugged up to an USB enclosure so I need help. Thanks in advance!!!

    Read the article

  • Can't access USB drive anymore

    - by marie
    I have a 32 GB Lacie Cookey USB flash disk that doesn't show in the Computer window but it's visible as a device. cmd > diskpart DISKPART> list disk Disk ### Status Size -------- ------------- ------ Disk 0 Online 149 G Disk 1 No Media 0 DISKPART> select disk 1 Disk 1 is now the selected disk. DISKPART> clean Virtual Disk Service error: There is no media in the device. It also appears in the Disk Management tool, but the box is empty. Is there anything I can do or is it dead? ............................................................ output from ChipGenius: Description: [F:]USB Mass Storage Device(LaCie CooKey) Device Type: Mass Storage Device Protocal Version: USB 2.00 Current Speed: High Speed Max Current: 200mA USB Device ID: VID = 059F PID = 103B Serial Number: 070535924B170C18 Device Vendor: LaCie Device Name: CooKey Device Revision: 0100 Manufacturer: LaCie Product Model: CooKey Product Revision: PMAP Controller Vendor: Phison Controller Part-Number: PS2251-67(PS2267) - F/W 06.08.53 [2012-09-26] Flash ID code: 983AA892 - Toshiba [TLC] Tools on web: http://dl.mydigit.net/special/up/phison.html

    Read the article

  • USB stick appearing as hard disk drive, not removable storage device

    - by Paul Lammertsma
    I just plugged in a very simple 1GB USB stick from the office in hopes of making it a Fedora Live USB stick. For that to work, I need a removable storage device, or else it won't appear in LiveUSB Creator's list. Explorer lists my USB stick as a hard disk: LiveUSB Creator indeed doesn't show it in the device list: Is there any way of forcing Windows to see the stick as a removable storage device?

    Read the article

  • Cannot reformat flash drive

    - by user933531
    I have tried to reformat on Ubuntu using gparted, in Windows using their tool, and OSX using Disk Utility. I have also attempted by using the terminal but also failed there. When I verify disk using Disk Utility, I get the following output: Verifying volume “REDSTRIPE” ** /dev/disk2s1 ** Phase 1 - Preparing FAT ** Phase 2 - Checking Directories ** Phase 3 - Checking for Orphan Clusters 168 files, 4507316 KiB free (1126829 clusters) MARK FILE SYSTEM CLEAN? no ***** FILE SYSTEM IS LEFT MARKED AS DIRTY ***** Error: This disk needs to be repaired. Click Repair Disk. But I am unable to repair disk. See OSX examples below:

    Read the article

  • Connecting to a 2.5" laptop drive using USB

    - by user27449
    So I swapped my MBP hard drive with a SSD drive, and I want to connect to my old hard drive. I bought a nextstar 3 external 2.5" drive enclosure that has a USB 2.0 interface. I watched an online video of an older version of the enclosure, and in the video they had a ATA cable to connect to the drive. My enclosure didn't come with anything like that, and there doesn't seem to be a way to connect to my drive (my old drive is a seagate 500gb momentus 7200 RPM). My laptop is about 2 years old now (MBP 17"). The drive doesnt' have pins to connect, it has a wide plug type connector, and a USB connector also (I was able to directly plugin the USB cable to the drive, but didn't connect it to my computer, was just testing thigns out). Is it safe for me to directly connect the cable that came with the enclosure to the drive, and then connect the other end to my computer? Does this single cable provide power and data transfer?

    Read the article

  • Windows XP Boot Issue - Diagnosing A Hard Drive Failure

    - by duffymo
    My five-year-old HP desktop running Windows XP SP3 wouldn't boot from the hard drive yesterday afternoon. I would see the boot sequence begin, then nothing but a black screen. Fortunately, I had just done an Acronis backup to my external drive in the morning, and I have a bootable USB key. I put the USB key into the drive, powered up the machine, and put the USB key first in line in the boot sequence. Voila! My machine came alive. But now I'm confused as to what the problem is and what to do next. I assumed that my hard drive was toast. But now that the machine is alive I can see files on my C: drive that have changes I made just yesterday. Clearly the drive is not dead. Here are my questions: What could explain my inability to boot from the hard drive? What would a remedy be? What's my best course of action? Should I replace the hard drive with a new one? If I replace the hard drive, do I reinstall the OS and apply the backup I did yesterday? If I decide that re-installing Windows XP makes no sense, how do I get back the Acronis backup that I did yesterday? I don't want to lose that. UPDATE: I just learned one more key fact. I'm having some work done on my house. I neglected to shut my machine down before the contractor came. My wife said he shut down the power to do some work on a circuit and then powered the house back up. I have a surge protector, but is it possible that cycling the power did some damage?

    Read the article

  • Spinup time failure

    - by bioShark
    I am not sure this is a real question or a bug I should report Ubuntu. Using: Ubuntu 11.10, on a Intel Q6600, Samsung Spinpoint F4 2TB. I have set my PC on Suspend and after I came back, pressed Enter and after logging in everything was back to normal. However, I had a message from Disk Utility that one disk reports errors. I entered Disk Utility, and my Samsung 2TB disk, the one on which my Ubuntu is installed, had the SMART Status turned red, with error message on it. The error was: Spinup time failed Value 21, Threshold value was 25 (so the error was reported because 21 < 25) I restarted and booted up in Windows to see what HD Tune is reporting. Unfortunately it was exactly the same 21/25. After reading up on Wiki about SMART and the errors, I discovered that Spinup time is the time required for the disk to reach full spinning speed in milliseconds. Then it hit me that, in Ubuntu I had Suspended the system, making essentially all my hardware stop. And when I rebooted to Windows, the hardware doesn't really stop, so SMART's reading of the Spinup time was still from Ubuntu's suspension. So I did a full PC stop and then booted up again, both in Ubuntu and Windows to see if there are different readings. Both reported successful Spinup time, 68 (a little better then 21 :) ), although in Disk Utility I have a nice message: Failed in the Past So now I am pretty sure that Ubuntu didn't handle the Suspend correctly, but then again should I worry about Imminent hardware failure ? Am I missing some drivers? Should I report this as a bug to Ubuntu? Sorry if this was a bad place to ask this question.

    Read the article

  • "Bootmgr is missing...." Upon reboot [closed]

    - by Gabe
    Possible Duplicate: Install/running ubuntu on extarnal HDD with a windows laptop? Ill take you through the steps I did. Sorry if this question has already been resolved, I'm new to Ubuntu and forums in general. I have 2 internal HDDs in my computer, both with Win7. One HDD is my mothers, the other is mine. I did this because she didn't want my games on her computer, and my PCs motherboard took a crap on me, so I set up a dual boot. I also have an external HDD. This is what I am trying to install Ubuntu 12.04 on. I formatted the drive by right clicking it, then selecting "Format". It is now in NTSF format. I downloaded the Windows installer, ran it, and selected "I:/" (my externl hdd) as the install location. The download and installation ran smoothly, and it gave me the reboot prompt. I selected "Reboot now" and my PC rebooted. I was then interrupted by the "Bootmgr is missing. Press CTRL + ALT + DEL TO REBOOT" message. NOTE: I would like to use my HDD for a FULL Ubuntu installation, not the Live (i think thats what its called). I want all my files and settings from Ubuntu saved to the External drive as if it was my only drive. If you need more information just ask. Any help would be appreciated. Thanks in advance.

    Read the article

  • usb ntfs pen drive and hard drive not working after connection to ubuntu

    - by lemon619
    as said in the title first of all i connected a usb key (ntfs formatted) with data in it, on ubuntu 12.04, after i disconnected it i was no more able to access the usb key neither from windows nor from ubuntu 12.04. The system asks me to format my usb key Just now i connected a hard drive ntfs formatted with data in it to ubuntu 12.04. I ejected correctly the hard drive and connected it to windows, and the system asks me to format my hard drive? same as the usb key Can someone help me please ? Would really appreciate!

    Read the article

  • HP DL380 G5 Predictive Drive Failure on a new drive

    - by CharlieJ
    Consolidated Error Report: Controller: Smart Array P400 in slot 3 Device: Physical Drive 1I:1:1 Message: Predictive failure. We have an HP DL380 G5 server with two 72GB 15k SAS drives configured in RAID1. A couple weeks ago, the server reported a drive failure on Drive 1. We replaced the drive with a brand new HDD -- same spares number. A few days ago, the server started reporting a predictive drive failure on the new drive, in the same bay. Is it likely the new drive is bad... or more likely we have a bay failure problem? This is a production server, so any advice would be appreciated. I have another spare drive, so I can hot swap it if this is a fluke and new drive is just bad. THANKS! CharlieJ

    Read the article

  • How can I get data off of a damaged thumb drive?

    - by Lord Torgamus
    A guy I work with just came by to ask me about a damaged thumb drive/USB flash drive. Apparently his son dropped it on a hard surface and it won't power up anymore. They've tried plugging it into multiple machines without success, even though each port they tried was able to power other USB devices. He knows it's not a lost cause because a local tech store is offering to recover the data for $500, but he says they're not worth that much. I figured someone on SU would have an idea about this; he doesn't care about using the drive in the future, just wants to salvage a few files that would be a pain to recreate. Is this possible without advanced equipment, and if so, how? He said he already tried the advice on the Internet about typing in different drive letters and such, but that failed because there was no power going to the drive. He also said that he opened the case up at one point, but I'm not sure what, if anything, he did inside.

    Read the article

  • Why does my drive show as 180GB used, but copies only 40GB?

    - by Manuel
    My computer crashed, so I removed the drive (with Windows XP Professional 32-Bit) and put this drive in another computer running Windows 7 64-bit. Booting with Win7, when going to My Computer it is showing the XP drive as more than 180GB used. So as a quick backup, I'm trying to copy all the disk's content to a folder, but when I start copying, it's showing only 40 GB as the total size of the files to copy. I enabled showing system and hidden files in View options. What could be the problem?

    Read the article

  • OS X Hard drive recovery

    - by Adam
    I am trying to recover data from a bad Seagate 1TB hard drive in a 2010 iMac. One day the iMac wouldn't boot (stuck at gray screen on startup). I removed the hard drive from the iMac and connected it to a MacBook using a 3.5" HDD to USB adapter. The hard drive wouldn't mount but it did display in Disk Utility that that there were 2 partitions on the disk. I tried to run Disk Warrior and it showed thousands of errors but still wouldn't mount. At this time the hard drive only show one partition in Disk Utility. Next I tried putting the hard drive in a desktop PC and running Spin Rite - which then gave me several division overflow errors (even with running Spin Rite with a newer version of DOS). The SMART status on the drive reports that the drive has had failures and HD Tune referenced the drive had once hit 59 degrees celsius. Disk Utility gives me the following message when running a pair: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files. Overall, the hard drive spins up and sounds OK - there are no clicking noises but the hard drive won't mount and displays as a light gray "Macintosh HD" in disk utility. Any tips or advice on how to recover data on this drive would be GREATLY appreciated! Are there any other tools I can try before calling it quits on this drive? Thank you

    Read the article

  • CD Drive not discovered

    - by user1009073
    I have a self built computer. it uses a P6T Deluxe motherboard, which has both SATA and IDE ports. This was built several years ago, and had an IDE CD/DVD drive. This drive started going bad (would not burn CDs correctly), so I decided to replace it. I had difficultly finding an IDE DVD drive, so I bought a SATA DVD drive. I opened the comnputer, took out the old DVD drive. I left the IDE cable in place, connected to the motherboard, but it is not connected to any drives. I hooked up the new DVD drive, both power and with a SATA data cable (SATA port 3 if I recall). (Sony Optiarc 24x , Newegg URL: http://www.newegg.com/Product/Product.aspx?Item=N82E16827118067 ) When I power on my computer, the drive does NOT show up in Explorer. I can hit the DVD eject button, and the drive will open up, so I know it at least is getting power. I thought, maybe something in the BIOS. When I go to BIOS, boot devices, it shows (1) floppy, (2) my hard drive (3) ATAPI CD Drive. The only other possible BIOS option I could find was uder 'Storage Configuration'. Configure Storage as: My setting is RAID, since I am using two drives in a RAID configuration. Other options were IDE and ACHI. Other than trying to find an IDE DVD drive, is there anything else I can try? The drive does not show up at all in Windows Explorer. I did put in a CD thinking that might help, but nothing happened. Thanks, GS

    Read the article

  • PC won't boot from IDE HDD when SATA data drive connected

    - by Kevin
    I have an old Pentium 4 system running XP. The machine is set up as an HTPC. It was set up and running well with 1 SATA drive as a boot drive, another SATA drive to store TV recordings, and an IDE drive to store more recordings. Last week the original boot drive (a SATA drive) failed. The BIOS would no longer recognize it. I had a disused IDE drive hanging around that was large enough for the OS, so I reformatted it and installed XP on it. Now the system will only boot if I do not connect the remaining healthy SATA data drive. All three drives are recognized by the BIOS, and I have set the boot order so that the IDE drive with XP on it has top priority, but after the BIOS recognizes the drives, etc. I just get a black screen. I know the SATA drive is functional, because if I hot plug the drive AFTER the system is booted (I know I'm not supposed to do this), I can go into the control panels and mount the drive, and see all the files and folders on it in Windows Explorer. Any suggestions on what is going on and how to fix it? Many thanks.

    Read the article

  • PSU died, is hard drive fried? Are other components damaged?

    - by srand
    After discovering and replacing my dead PSU, I was able to boot back into Windows. Everything seems to be working fine, however, one hard drive is not. Windows 7 says that this SATA hard drive needs to be formatted before it can work. Can the data be recovered? Also, is there a way to check the integrity of the other components of my computer or assume they will work fine?

    Read the article

  • Moved to SSD and now getting "the disk drive for / is not ready yet"

    - by dmt0
    I moved my Ubuntu 12.04 install over to an SSD drive. Copied all directories except for the ones most often written to - var, tmp, ... Reinstalled grub into SSD by booting with live CD and following the commands in this post: How to move Ubuntu to an SSD This seemed to work fine, because when I press "e" in grub menu, I see the expected UUIDs. But right after grub I get could not log bootup: Address already in use the disk drive for / is not ready yet or not present. If I skip, I get same for /tmp /run, and other dirs If I go into manual recovery and do mount -n -o remount,rw / it turns out that everything can mount no problem. Can't get my head around this one. My fstab seems right. grub is right. AHCI in bios is enabled. Why is this happening? What can I do to fix it? When I do drop into shell from this error and get to mount things manually, how do I get the OS to continue loading? Thank you guys for any ideas you can give me. Here's what my fstab looks like right now: # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 UUID=67fc8a7a-f1db-485c-88bd-e007c214244f / ext4 defaults,noatime,discard 0 1 # swap was on /dev/sda3 during installation UUID=6bc9cd6c-46b7-43a0-bfac-bd04cc26cfb6 none swap sw 0 0 UUID=7397729b-2125-4b1d-b5eb-28866898d773 /hdd ext4 errors=remount-ro 0 1 /hdd/home /home none bind 0 0 /hdd/run /run none bind 0 0 /hdd/tmp /tmp none bind 0 0 /hdd/var /var none bind 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 output from blkid: /dev/sda1: LABEL="System Reserved" UUID="EABC56C1BC568849" TYPE="ntfs" /dev/sda2: UUID="7CCC6124CC60D9C2" TYPE="ntfs" /dev/sda3: UUID="6bc9cd6c-46b7-43a0-bfac-bd04cc26cfb6" TYPE="swap" /dev/sda5: UUID="7397729b-2125-4b1d-b5eb-28866898d773" TYPE="ext4" /dev/sdb1: UUID="67fc8a7a-f1db-485c-88bd-e007c214244f" TYPE="ext4" relevant from fdisk -l: Device Boot Start End Blocks Id System /dev/sdb1 2048 115345407 57671680 83 Linux

    Read the article

  • Drive system file size

    - by rezx
    When i made a new drive it take some space for system file FAT32 take the less space, then NTFS, then ext4 my question how to know the space will be taken for the system before make the drive, if the drive 1giga or 100giga for FAT32, NTFS, ext4. Edit: when make 10MB drive with FAT32 the size shown 9.9 when make 10MB drive with ext4 the size shown 8.1 the same thing with the bigger size there always some space used and there is no files on the drive, so where this space go, if it for the filesystem how i can calculate the space that will be taken before format the drive

    Read the article

  • Hard Drive problem: is it the SATA controller or the HDD itself?

    - by Drooling_Sheep
    I have a Samsung 1.5TB hard drive hooked up to an ECS H55H-I mini-ITX motherboard. I have XBMC 10 (modified Ubuntu 10.04) installed for use as an HTPC. The hard drive encounters occasional errors during normal use which cause it to be remounted read-only. I have updated the BIOS on the motherboard, changed the SATA cable and moved it to different ports on the motherboard, installed and re-installed the OS (including different versions of XBMC and generic ubuntu), all to no avail. I recently ran tests both with badblocks -sv and smartctl -t long. Both reported no errors. This makes me think the motherboard or SATA controller is probably the issue. Does anyone know of any further tests I can do to help narrow this down? The processor is a Core i3. I forget the model number but it's one of the 32nm ones with on-package graphics. There's no discrete video card or optical drive. The power supply is a 150W Rosewill (pretty sure) that came with the case.

    Read the article

  • Formatted mac external hard drive loaded on pc

    - by kjokay
    I have an issue where it appears that an external hard drive which had been formatted on a mac system was loaded as a drive in Windows. Windows is obviously unable to read the data and now the drive won't mount in the mac. It appears that Windows overwrote something concerning the drive's information on what filesystems and types it has on it. Mac diskutility is unable to repair the drive and the partition is showing up in the utility as a FAT32. Using an applexsoft utility, I am able to verify the data is still on this drive, but I'd rather not spend $100 to save these files (its not my hard drive anyways). Is there a way I can use some UNIX commands to find out the partition information on the drive, back the raw data up on it, then restore the data back onto the drive after re-formatting it again?

    Read the article

  • Map a Network Drive from XP to Windows 7

    - by Mysticgeek
    We’ve received a lot of questions about mapping a drive from XP to Windows 7 to access data easily. Today we look at how to map a drive in Windows 7, and how to map to an XP drive from Windows 7. With the new Homegroup feature in Windows 7, it makes sharing data between computers a lot easier. But you might need to map a network drive so you can go directly into a folder to access its contents. Mapping a network drive may sound like “IT talk”, but the process is fairly easy. Map Network Drive in Windows 7 Note: All of the computers used in this article are part of the same workgroup on a home network. In this first example we’re mapping to another Windows 7 drive on the network. Open Computer and from the toolbar click on Map Network Drive. Alternately in Computer you can hit “Alt+T” to pull up the toolbar and click on Tools \ Map Network Drive. Now give it an available drive letter, type in the path or browse to the folder you want to map to. Check the box next to Reconnect at logon if you want it available after a reboot, and click Finish. If both machines aren’t part of the same Homegroup, you may be prompted to enter in a username and password. Make sure and check the box next to Remember my credentials if you don’t want to log in every time to access it. The drive will map and the contents of the folder will open up. When you look in Computer, you’ll see the drive under network location. This process works if you want to connect to a server drive as well. In this example we map to a Home Server drive. Map an XP Drive to Windows 7 There might be times when you need to map a drive on an XP machine on your network. There are extra steps you’ll need to take to make it work however. Here we take a look at the problem you’ll encounter when trying to map to an XP machine if things aren’t set up correctly. If you try to browse to your XP machine you’ll see a message that you don’t have permission. Or if you try to enter in the path directly, you’ll be prompted for a username and password, and the annoyance is, no matter what credentials you put in, you can’t connect. To solve the problem we need to set up the Windows 7 machine as a user on the XP machine and make them part of the Administrators group. Right-click My Computer and select Manage. Under Computer Management expand Local Users and Groups and click on the Users folder. Right-click an empty area and click New User. Add in the user credentials, uncheck User must change password at next logon, then check Password never expires then click Create. Now you see the new user you created in the list. After the user is added you might want to reboot before proceeding to the next step.   Next we need to make the user part of the Administrators group. So go back into Computer Management \ Local Users and Groups \ Groups then double click on Administrators. Click the Add button in Administrators Properties window. Enter in the new user you created and click OK. An easy way to do this is to enter the name of the user you created then click Check Names and the path will be entered in for you. Now you see the user as a member of the Administrators group. Back on the Windows 7 machine we’ll start the process of mapping a drive. Here we’re browsing to the XP Media Center Edition machine. Now we can enter in the user name and password we just created. If you only want to access specific shared folders on the XP machine you can browse to them. Or if you want to map to the entire drive, enter in the drive path where in this example it’s “\\XPMCE\C$” –Don’t forget the “$” sign after the local drive letter. Then login… Again the contents of the drive will open up for you to access. Here you can see we have two drives mapped. One to another Windows 7 machine on the network, and the other one to the XP computer.   If you ever want to disconnect a drive, just right-click on it and then Disconnect. There are several scenarios where you might want to map a drive in Windows 7 to access specific data. It takes a little bit of work but you can map to an XP drive from Windows 7 as well. This comes in handy where you have a network with different versions of Windows running on it. Similar Articles Productive Geek Tips Find Your Missing USB Drive on Windows XPMake Vista Index Your Network ConnectionsEasily Backup & Import Your Wireless Network Settings in Windows 7Quickly Open Network Connections List in Windows 7 or VistaHow To Find Drives Easily with Desk Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher

    Read the article

  • Save Web Content Directly to Google Drive in Chrome [Extension]

    - by Asian Angel
    Are you looking for a quick and easy way to save images, documents, and more directly to Google Drive while browsing? Then you may want to grab a copy of the ‘Save to Google Drive’ extension for Chrome. Once you have installed the extension it is very easy to start saving all that wonderful web content to your Google Drive account via the Context Menu or the Toolbar Button as seen in the screenshot above. One thing to keep in mind is that the first time you use the extension you will be asked for permission to access your account as seen in the screenshot below. Here is a quick look at the options currently available for the extension… Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >