Search Results

Search found 8358 results on 335 pages for 'external harddrive'.

Page 6/335 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• Disable laptop's display on boot when used with external display

  - by Ryan

  I keep my laptop tucked away and solely use an external display with it via HDMI. In Windows 7 display settings, I have it set up to "Show desktop only on 2 [my external display]" This works fine in all cases except when I boot the laptop when the external display is already connected. In that case, the laptop's display stays on and sticks at the Windows 7 boot logo unless I manually shut the display off. (I should mention that while the laptop's display is stuck at the boot logo, the external monitor and computer are running just fine.) The laptop is an Asus N56VZ with Nvidia 650m graphics and the latest drivers. I've checked Nvidia's control panel as well as the BIOS and nothing looked very promising. Any ideas as to how I can get my laptop screen to shut itself off after booting into Windows?

  Read the article

• MySQL unstable behavior with external stroge

  - by onurozcelik

  In our project we are using MySQL 5.0.90(InnoDB engine) server with an external storage. We store MySQL data files in an external storage. When the external storage down for a reason we have unstable behaviours. So we made some tests. In Windows Server 2008 We closed external storage physically. MySQL service stoped and we could not reach the server. Then we opened the storage unit and we could not start service until we reconfigured MySQL. We made storage unit offline from operating system. After 3-4 minutes and some insert trials(some insert trials succeded) MySQL service stoped and we could not reach the server. Then we made storage unit online and we could start the service(not automatically). In Windows Server 2003 We made storage unit offline. After 3-4 minutes and some insert trials(some insert trials succeded) MySQL service stoped and we could not reach the server. Then we made storage unit online we could not start the service until we reinstalled MySQL. Before reinstall we tried to reconfigure but it did not work. We closed external storage physically. MySQL service stoped and we could not reach the server. After that we opened the storage unit and we could start service(not automatically) We expect service to autostart after storage unit is online/open. But these tests show unstable behaviors. Is there any solutions to this.

  Read the article

• Suggestion for boot manager in external hard disk

  - by Korrupzion

  Hi, I just bought an 1TB External Hard drive with eSATA, USB, FW400/800 (LaCie if you are interested). I already put the windows 7 installation in a FAT32 active partition so i can plug the HDD via USB, since my notebook or other computers doesn't support boot via eSATA commonly, and it works. Now i want to do more partitions so i'm looking for a way to have a boot manager as active partitions that allows me to boot from different partitions in my HDD (win7, ubuntu installations for example) I want to know if you know any software to do this or you already have this system. Thanks and sorry i have too many grammar errors because english is not my native language :)

  Read the article

• how to setup sonicwall tz210 to port forward packets received from external ip to another external ip

  - by lplp

  i have a sonicwall tz210 on a fixed ip, say ip1. And then i have, let's say a legacy server, with external ip ip2, which sends data to ip1 (and I have another server on ip1 behind the sonicwall which receives and processes that data). I would like to set up a new server on a different external ip ip3 that will receive and process data from the legacy server. How can I setup the sonicwall so that the packets received from the legacy server (from an external ip) are port forwarded to the external ip address ip3?

  Read the article

• Grounded outlet on external hard drive.

  - by goathens

  Is there any value in getting an external hard drive with a grounded power supply? Would grounding the drive protect it from a static jolt from my hand when I pick it up? I've only really ever used the huge 5.25" external housings (they usually have an integrated power supply and use the standard heavy PSU cable with ground), and I need some more but noticed while shopping that the current trend is towards smaller enclosures with the external brick (and hardly ever grounded).

  Read the article

• Cannot open an external hard drive in Windows

  - by SeeBees

  In Windows 7, I was installing wubi ubuntu to an external hard drive when suddenly it disconnected from the PC. After I connected it back to PC, and double clicked the drive's icon, Windows didn't show the content of the disk but asked me whether I wanted to format it. The hard drive has only one partition. Its format is NTFS. I also connected the disk to Windows XP. It makes the Windows Explorer super slow and I cannot open the disk as well. I can open the disk on Ubuntu and Mac. Is it possible to restore the disk and make it run in Windows? Thanks

  Read the article

• Encryption of external HDD -- accessible from windows without installation

  - by Rainer

  I would like to use encryption on my external HDD but I would like to be able to access the encrypted data from Windows as well. As suggested in other questions, TrueCrypt is one option here, or I am using momentarily encfs, which is not available for Windows. But my question goes further: I would like to be able to access the encrypted partition from Windows without installation as I will be using it from different Windows machines for which I have no administrator access. My main OS is Linux and I have full root access to that computer. Is there a full disk or file based encryption which I can use cross platform and which does not require installation under Windows? ADDITION: It seems that TrueCrypt provides a portable mode which fulfills my requirements partly: http://www.truecrypt.org/docs/?s=truecrypt-portable, but still the TrueCrypt driver needs to be installed by an administrator... pitty Thanks

  Read the article

• machine crash when connecting to external harddisk

  - by Gnot

  i recently had a problem with my laptop. when i booted up the machine, i would get a SMART failure error message and when i pressed F1 to continue, it would take a very long time to boot and it would come back to the same error message again. thinking that my hard disk was dying, i bought a new hard disk and installed on my laptop and so now my laptop is alright. however i need to recover data from that old hard disk, so i bought an external hard disk case and placed the old hard disk onto the case and connected to my laptop with USB. the first few times when i connected, i could see the files from the old hard disk and managed to copy some files over although it took extremely long to transfer. but now whenever i connect to the old hard disk, after a few minutes, my laptop will crash and re-boot. do you think my old hard disk is dead beyond repair? or you can offer some help here? any assistance would be appreciated!

  Read the article

• Windows External Harddisk drive letter after cloning boot partition to it

  - by gladiator2345

  I cloned my windows 7 installation on c: to external hard drive. I applied usb patch using pwboot and i could successfully boot into windows. But My problem is even though i am booting in to external hd the file reference and system path is pointing to c: on my internal hard disk. If i remove internal hd and boot it will get stuck at login screen. Is there any way i can force drive letter c: to my boot partition on external hd while booting from it.

  Read the article

• Can't access files on external drive after reformatting Macbook Pro

  - by Peter Wells

  I recently had to reformat my Macbook Pro, and imported my account and settings from Time Machine via the Migration Assistant. Everything on the Mac itself is fine, but now I don't have permission to access almost everything on my external drive. A number of folders have the little red 'no access' sign on them and I can't rename or move anything. Looking at the info for these files, it appears that access rights were attached only to my old user account. Is there some way to reassign these files and folders to my new user account? Thanks.

  Read the article

• Running a VM off of an external HD via USB

  - by Nelson LaQuet

  Is it viable to run (i.e. reference the vmx/vhd directly from the mounted drive) a VM (vmware running Windows Seven) off of an external HD via USB? I mean, I know it's possible, but I guess I'm asking if USB provides enough bandwidth for normal usage... If so, are there any particular brands that may be better or worse? I know that ESATA would be a more viable setup, but my laptop doesn't have an ESATA port. Currently I use the VM to segregate all of my work development servers and software from my main machine; so I will be running all development servers and tools on the VM directly.

  Read the article

• Having problems with Grub2 booting Ubuntu from my External Hard Drive

  - by anonymous

  I installed Ubuntu on my external hard drive but it won't boot on my laptop. what do i do? i did some reading and traced the source of the problem to grub2. Apparently, grub2 doesn't use the device's UUID, and uses the linux directory instead (/dev/sdf2). This means that whenever i plug my E-HDD into a system that has a different number of drives connected to it, i won't be able to boot without editting the boot command. I don't understand it too well but that's what i got from what i read. Is there anyway to fix this?

  Read the article

• Laptop crashes when connecting to external harddisk

  - by Gnot

  I recently had a problem with my laptop. when I booted up the machine, I would get a SMART failure error message and when I pressed F1 to continue, it would take a very long time to boot and it would come back to the same error message again. Thinking that my hard disk was dying, I bought a new hard disk and installed on my laptop and so now my laptop is alright. However I need to recover data from that old hard disk, so I bought an external hard disk case and placed the old hard disk onto the case and connected to my laptop with USB. The first few times when I connected, I could see the files from the old hard disk and managed to copy some files over although it took extremely long to transfer. But now whenever I connect to the old hard disk, after a few minutes, my laptop will crash and re-boot. Do you think my old hard disk is dead beyond repair? Or you can offer some help here? Any assistance would be appreciated!

  Read the article

• Why are the external IP of my router not the same as the external IP of my computer

  - by Martin

  I have a standard network setup where all my network devices, both WIFI and ethernet, are connected to the same router. Lately, however, I've been experiencing some very strange behavior. It started as a simple connecting error, when I tried to reach an FTP server using the external IP. Of course I went right into one of those CheckMyIP sites, to double check the IP and it turned out to be correct. Then I went into my router setup, which is through a tool called aiport-tool, because I have an Apple Aiport Extreme router. Turns out the router displays a different external IP, and for some reason that external IP works when I try to access the FTP server. Can anyone explain what is going on? Why are the devices connected to the router displaying an incorrect external IP? BTW i have no VPN/proxy setups on any of my devices.

  Read the article

• External Hard Disk's secter could not be read ?

  - by mgpyone

  I've an 500 GB Seagate External Hard Disk (NTFS) . Currently, I can't open it at Windows. Thus, I've tired with chkdsk command .. but still it stopped and can't continue checking disk.. Also I've tired with fsck on Mac . Then, it shows me the Error .. /Volumes/<HD Name>/ is not a character device CONTINUE? yes /Volumes/<HD Name>/ (NO WRITE) CANNOT READ: BLK 16 CONTINUE? yes THE FOLLOWING DISK SECTORS COULD NOT BE READ: 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, ioctl (GCINFO): Inappropriate ioctl for device fsck: /Volumes/<HD Name>/: can't read disk label The volume I've used is around 300 GB , Thus, it's hard to back up and format again . Thus, any helpful suggestions and solutions will be appreciated pretty well.

  Read the article

• win 7 back up utility cant detect external drive on a netbook

  - by decoder101

  im trying to image a new HP netbook via the windows 7 BACK UP util. however, it doesnt detect the external drive, although it's seen in my computer and BIOS. i tried using HP recovery manager with recovery disc creation but it says, no burning device installed although there is one... anyone successful in using the win7 back up utility? ive been tinkering this for a while but i cant make it right using an external dvd drive. unless i'll plug in an external hdd/

  Read the article

• Working with an external button box

  - by Scott

  I tried this question on Stack Overflow, but I was pointed here, so here goes: For a new project for myself, I am looking for a way to be able to (for example) open a pop-up window on my laptop, by pressing a button on an external device (to be build by myself, or at least bought) connected with USB. Basically I would be looking at something like a Arduino or Raspberry (IF I am looking in the right direction) with buttons on it, and as soon as I hit a button on the external box with physical buttons, a command activates on my laptop and for example opens a popup window in which I can input tekst. Does anyone know: 1) if it is possible to do this at all. 2) What equipment is needed for the external box, what programming is needed. I preffer .net (dot net) but maybe it can only be done with software from the external box. If anyone can point me in the right direction, like make/model of the external box or websites I would be very happy. I have knowledge of Visual Studio/.net but I am willing to learn other languages if .net is not an option for this project. Thanks in advance Scott PS: If anyone knows of some better tags, or at least knows what I mean and needs me to edit the question, please do tell me... I am new on Stack Overflow/Superuser.

  Read the article

• External disk not working with Mac OS X 10.5

  - by ctx2002

  Hi: My OS is 10.5.7. I have an external hard disk, formatted as Mac OS Extended (Journaled), connected to my Mac machine through USB cable. I have used it for a while, but now it is not working. Error showed in /var/log/system.log. USBF: 2521.384 AppleUSBEHCI[0xa515800]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 0, EP: 0) ..... ...... kernel[0]: USBF: 2588.616 [0xa6baa00] The IOUSBFamily was not able to enumerate a device. Luckily, in my work place there is a Mac with OS 10.4, so I had plugged the disk into the 10.4 machine and it worked!!! I did checked "System Profiler" on both machines (10.5, 10.4). Under usb section, for 10.5 it shows USBEHCI, under 10.4, it shows USBOHCI. I am not a expert on USB Device , can any one tell me why 10.5 cause the problem. it was worked under 10.5

  Read the article

• Getting windows 7 to boot from external hard drive. Using Ubuntu

  - by SMS

  I have Ubuntu 12.04LTS as my current operating system, and I have a Windows 7 iso on a disk. I'm using an external hard drive because my internal hard drive has become damaged. I need to get Windows to install onto my external hard drive (where Ubuntu is as well). The iso disk will not install windows to the hard drive. Can anyone help guide me through the process of getting windows on the external?

  Read the article

• Sync two external harddrives?

  - by acidzombie24

  A little mishap happened earlier today and i am thinking i should have a copy of my external harddrive since 10% of it is very valuable. What is the best solution to keep two external harddrive in sync? i'll probably use one as regular and maybe use the other only to copy data. The easiest way to keep it in sync is to clear one drive and copy the other but 1T of data will take a long time. Whats a good existing app that will keep them in sync? freeware preferred.

  Read the article

• Windows XP machine not seeing external FAT32 partitions correctly

  - by Rob_before_edits

  About 8 months ago my Windows XP machine stopped being able to see FAT32 external drives when I plug them in... mostly. I will explain... It happens with all my FAT32 drives, whether they be unpowered external hard drives, powered external hard drives, SDHC cards plugged directly into the machine's card reader, or SDHC cards plugged in via a separate USB card reader. All of these drives/cards used to work fine on this machine. They all stopped working at about the same time. NTFS volumes are not affected. If I plug in NTFS external drives they are recognized right away. I even have one external drive with two partitions on it, one is NTFS which is recognized, the other is FAT32, which is not recognized. If I attach a FAT32 drive, then reboot, then the drive almost always becomes visible to the machine after the reboot. Sometimes I can plug in a FAT32 drive and it works right away. Not often though. I'd say I get lucky more often with SDHC cards than hard drives. I'm developing a theory that I only get lucky with hard drives if I'm running Acronis Disk Director when I plug them in, though that usually doesn't work either - I need more data here, this may be a red herring. Getting lucky with a hard drive is really rare, usually I have to reboot. When a FAT32 is recognized, either because I got lucky or because I rebooted, I can almost never safely disconnect it. It tells me "The device 'Generic volume' cannot be stopped right now. Try stopping the device again later". I can't seem to get around this. IIRC, I've tried closing every open window, and still no luck. Since I care about my data usually the only way to disconnect a FAT32 drive is to shut down the machine. As you can imagine, two reboots just to read a drive is getting pretty old... When the machine fails to see a FAT32 drive it usually comes up with the appropriate drive letter and the words "Local Disk" in Windows Explorer instead of the correct partition name. If I click on it I get "J:\ is not accessible. The parameter is incorrect." Before this problem arose I always clicked the "safely remove" button for everything, including SDHC cards where I think it's not necessary. I've known for a long time that this is the correct procedure for hard drives, so I don't think failing to do this was the cause of this problem (before someone asks :) Any answers or suggestions most welcome.

  Read the article

• Closing laptop lid and using external display causes mouse to move on it's own

  - by PolishHurricane

  I plugged my ASUS Taichi Laptop into an external monitor via the VGA Adapter that it comes with. It was working fine, but then I configured a power option so I could shut the lid without it going to sleep (so I could use just the external monitor with an external keyboard/mouse). Problem is though, now, when the lid is closed and I move the mouse, the mouse is moving around on it's own, but when I open the laptop lid back up, the mouse is fine. I looked under the lid when it was closed and the display properly shuts off on the laptop. It's not the external mouse/keyboard because I completely unplugged them and it was still happening. Nobody is hacking me or anything, I totally went into airplane mode/pulled the wire. I have a touchscreen, but I put a piece of paper over it and it wasn't doing it. I was thinking it might be the trackpad being touched somehow by the screen when the lid is closed? But I went into windows 8 control panel options and I couldn't find anywhere to disable it (it sees the USB mouse I think).

  Read the article

• Compiz and Desktop Effects on Netbook with External Monitor

  - by Nerdfest

  I have an Acer Aspire One AO150 and am having trouble plugging in an external monitor under Ubuntu 9.10. There were no problems under 9.04. If I plug in an external monitor once the machine is already up, then bring up the 'display' application to activate it, it basically hangs. There are no problem under these circumstances if I have desktop effects turned off. I've seen a few mentions of this problem on the Ubuntu forums, but never a solid solution. Any ideas? A few more details after a question below. The machine does not respond to its keyboard commands to switch to an external monitor, nor does it respond to Ctrl-Alt-F1, etc to switch out of X. The pointer is visible on the monitors (at the edge of each) and is frozen as a 'busy' cursor, but with no animation. The kernel does respond to SysReq commands (REISUB). In the latest attempt I had the external monitor active earlier, then removed it and activated desktop effects. Upon plugging in the eternal monitor then bringing up the display application, it hangs.

  Read the article

• External hard drive no detected in a vista ultimate

  - by raghavendra

  Hi, I have created a partition in my external HD and later i am trying to install XP over Vista . So i have entered into my DOS prompt and i choose the DISK TYPE and i choose external DD and i tried to CLEAN it , Immediately my external HD is asked for FORMAT and i rejected it . After that i restarted my system , therefore i cannot able to see my external HD on my sysmen External HD: Seagate Free agent(500GB)

  Read the article

• mac: How to mount ejected external hdd again

  - by Maurice Kroon

  I've used my WD My Book 1TB for quite some time now. I always simply unplug it without officially 'ejecting' it. However, yesterday I did eject it (the partitions) before unplugging it. However, now, when i reconnect the hdd, it does not show the drives. It only shows the WD SmartWare partition (which is empty btw). The rest doesn't start. Does anyone know how to mount an unmounted disk? thx in advance!

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >