Search Results

Search found 13401 results on 537 pages for 'external monitor'.

Page 6/537 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

  • Video stutter when using external drive

    - by psion
    When using boxee to play video files off of an external western digital 1TB drive formatted NTFS, I notice a slight stutter in the video every 5-10 seconds. When using mplayer, it doesn't stutter as often, but it still stutters occasionally. If I play the video off of the local sata drive, it plays fine even in boxee. I use this computer as my HTPC and I just switched from windows to linux on it. In windows, I never had any sort of stutter playing movies from the drive. I am using the latest intel graphics drivers (for the intel GMA 950) root@eee-htpc:/home/htpc# grep wd /etc/mtab /dev/sdb1 /mnt/wd2 fuseblk rw,nosuid,nodev,allow_other,blksize=512 0 0 I notice that despite trying to use ntfs or ntfs-3g, ubuntu uses ntfs-fuse which I've heard is slower. /dev/sdb1: Timing buffered disk reads: 80 MB in 3.07 seconds = 26.08 MB/sec root@eee-htpc:/mnt/wd2# dd if=/dev/zero of=./120mb bs=1024 count=120000 root@eee-htpc:/mnt/wd2# time mv ./120mb /home/htpc real 0m2.095s user 0m0.016s sys 0m0.736s Even though fuse has a reputation for being slow, it should easily be fast enough for playing standard definition video files. So why the video stutter? edit: The issue seems to be overhead cpu usage from either playing off of a usb device or ntfs/fuse. Watching CPU usage with top, local files use 10-40% CPU. Watching the same video on the external formatted ntfs, it spikes to 170% (over 100% because of hyperthreading). To me it seems like it must be overhead from the fuse driver, though I don't know if it has more or less overhead than ntfs-3g. It's a EEEBox B202 that has an atom 270, so not exactly the most powerful out there. edit2: I believe the solution would be to use non-fuse drivers or different fuse drivers. so far I have not been able to. edit3: I've probably edited this more times than I should, but as an update I have upgraded ntfs drivers to ntfs-3g 2010.8.8 external FUSE 28 - Third Generation NTFS Driver using the following PPA - ppa:x3lectric/team-iquik-releases. When first opening a video file in boxee that's on ntfs there's still the same amount of lag. After a few minutes of video, the lag seems to go away and the cpu usage comes down to 10-40%. Every so often though, it begins to stutter again. Also, if I skip ahead/back in the file, it begins to stutter a lot.

    Read the article

  • External USB 3 drive not recognized

    - by ilan123
    Ubuntu 12.10 64 bit seems not to recognize my external hard disk. It is a Vantec NST-310S3 external disk enclosure with a WD 3TB drive. The disk has two NTFS partitions. My PC is a dual boot system. Under Windows 7 the hard disk works fine but I can't make it work with Ubuntu. When the drive is connected to the PC then the command sudo fdisk -l seems to hang forever. Below are the output of lsusb and cat /proc/partitions without the external drive and then with it connected. I added also the last lines of the dmesg command at the end. First without the drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 Second with the USB 3 drive: ilan@linux:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 13ba:0017 Unknown PS/2 Keyboard+Mouse Adapter Bus 001 Device 004: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Bus 001 Device 005: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera ilan@linux:~$ cat /proc/partitions major minor #blocks name 8 0 1953514584 sda 8 1 102400 sda1 8 2 629043200 sda2 8 3 367001600 sda3 8 4 1 sda4 8 5 471859200 sda5 8 6 157286400 sda6 8 7 324115456 sda7 8 8 4101120 sda8 11 0 1048575 sr0 8 16 2930266584 sdb ilan@linux:~$ lsusb -v -s 004:002 Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc. Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x55aa bcdDevice 1.00 iManufacturer 2 iProduct 3 iSerial 1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 44 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 ilan@linux:~$ sudo fdisk -l [sudo] password for ilan: Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf1b4f1ee Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1258293247 629043200 7 HPFS/NTFS/exFAT /dev/sda3 1258293248 1992296447 367001600 7 HPFS/NTFS/exFAT /dev/sda4 1992298494 3907028991 957365249 f W95 Ext'd (LBA) /dev/sda5 1992298496 2936016895 471859200 7 HPFS/NTFS/exFAT /dev/sda6 2936018944 3250591743 157286400 7 HPFS/NTFS/exFAT /dev/sda7 3250593792 3898824703 324115456 83 Linux /dev/sda8 3898826752 3907028991 4101120 82 Linux swap / Solaris dmesg output after connecting the external drive: [ 23.740567] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.740786] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.144673] usb 4-1: >new SuperSpeed USB device number 2 using xhci_hcd [ 49.163039] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 49.166789] usb 4-1: >New USB device found, idVendor=174c, idProduct=55aa [ 49.166793] usb 4-1: >New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 49.166796] usb 4-1: >Product: AS2105 [ 49.166799] usb 4-1: >Manufacturer: ASMedia [ 49.166801] usb 4-1: >SerialNumber: 0123456789ABCDEF [ 49.206372] usbcore: registered new interface driver uas [ 49.228891] Initializing USB Mass Storage driver... [ 49.229042] scsi6 : usb-storage 4-1:1.0 [ 49.229115] usbcore: registered new interface driver usb-storage [ 49.229116] USB Mass Storage support registered. [ 64.045528] scsi 6:0:0:0: >Direct-Access WDC WD30 EZRX-00MMMB0 80.0 PQ: 0 ANSI: 0 [ 64.046224] sd 6:0:0:0: >Attached scsi generic sg2 type 0 [ 64.046881] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.047610] sd 6:0:0:0: >[sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 64.048368] sd 6:0:0:0: >[sdb] Write Protect is off [ 64.048373] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00 [ 64.048984] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.048987] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 64.049297] sd 6:0:0:0: >[sdb] Very big device. Trying to use READ CAPACITY(16). [ 64.050942] sd 6:0:0:0: >[sdb] No Caching mode page present [ 64.050944] sd 6:0:0:0: >[sdb] Assuming drive cache: write through [ 94.245006] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 94.262553] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 94.263805] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 94.263808] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40 [ 125.262722] usb 4-1: >reset SuperSpeed USB device number 2 using xhci_hcd [ 125.280304] usb 4-1: >Parent hub missing LPM exit latency info. Power management will be impacted. [ 125.281511] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c00 [ 125.281516] xhci_hcd 0000:03:00.0: >xHCI xhci_drop_endpoint called with disabled ep ffff8800d37d1c40

    Read the article

  • External hard drive not recognized

    - by sr71
    Installed Ubuntu 10.10 on a hard drive by itself (no windows). All updates are up to date. Everything`works fine except when I plug in a 320 gig Toshiba external hard drive....it is not recognized. When I plug in an 8 gig flash drive it is recognized no problem. What do I mean by "not recognized"? I mean: how do you know it was not recognized. You can check the command "cat /proc/partitions" in a terminal with and without the hdd attached. If you see some difference, it's ok. If the difference is something like "sda1" (sd+letter+number) then you have partition on it, maybe it can't be handled in Ubuntu (no filesystem on it or so). If there is only "sda" in the difference for example (sd+letter, but no number after it) then the drive itself is detected, just no partition is created on it. Also you can check out the messages of the kernel, with the "dmesg" command in the terminal. If there is no disk/partition/anything in /proc/partitions, there can be an USB level problem, you can issue command "lsusb" as it was suggested before my answer. It's really matter of what do you mean about "not recognized". @Marco Ceppi @Oli @Pitto By "not recognized" I meant that when I plug in a 8 gig flash drive an icon immediately appears on the desktop imdicating that there is a flash drive plugged in and I can click on it and view the files on the flash drive. It also shows up on the "Nautilus" default file manager. When I plug in the 320 gig Toshiba external hard drive, I get no indication on the desktop or the file manager (thus "not recogized"). When I run the command cat/proc/partitions/ I get an error message Could not open location 'file:///home/bob/cat/proc/partitions' with or without the external hard drive installed. With the dmeg command I get about 10 pages of info with no mention of disk/partition/anything in /proc/partitions. When I run lsusb command I get the following: bob@bob-desktop:~$ lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 04b3:3003 IBM Corp. Rapid Access III Keyboard Bus 003 Device 002: ID 04b3:3004 IBM Corp. Media Access Pro Keyboard Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • Ubuntu 10.10 not recognizing external hard drive

    - by sr71
    Installed Ubuntu 10.10 on a hard drive by itself (no windows). All updates are up to date. Everything`works fine except when I plug in a 320 gig Toshiba external hard drive....it is not recognized. When I plug in an 8 gig flash drive it is recognized no problem. What do I mean by "not recognized"? I mean: how do you know it was not recognized. You can check the command "cat /proc/partitions" in a terminal with and without the hdd attached. If you see some difference, it's ok. If the difference is something like "sda1" (sd+letter+number) then you have partition on it, maybe it can't be handled in Ubuntu (no filesystem on it or so). If there is only "sda" in the difference for example (sd+letter, but no number after it) then the drive itself is detected, just no partition is created on it. Also you can check out the messages of the kernel, with the "dmesg" command in the terminal. If there is no disk/partition/anything in /proc/partitions, there can be an USB level problem, you can issue command "lsusb" as it was suggested before my answer. It's really matter of what do you mean about "not recognized". @Marco Ceppi @Oli @Pitto By "not recognized" I meant that when I plug in a 8 gig flash drive an icon immediately appears on the desktop imdicating that there is a flash drive plugged in and I can click on it and view the files on the flash drive. It also shows up on the "Nautilus" default file manager. When I plug in the 320 gig Toshiba external hard drive, I get no indication on the desktop or the file manager (thus "not recogized"). When I run the command "cat/proc/partitions/" I get an error message Could not open location 'file:///home/bob/cat/proc/partitions' with or without the external hard drive installed. With the "dmeg" command I get about 10 pages of info with no mention of disk/partition/anything in /proc/partitions. When I run "lsub" command I get the following: bob@bob-desktop:~$ lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 04b3:3003 IBM Corp. Rapid Access III Keyboard Bus 003 Device 002: ID 04b3:3004 IBM Corp. Media Access Pro Keyboard Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub bob@bob-desktop:~$

    Read the article

  • No other users can access external hdd since upgrade to 12.10

    - by Victor9098
    Since upgrading to Ubuntu 12.10 no other user can access the external hdd. This is awkward as its a family pc and we use the hdd to store music and save backups across the several accounts. The external hdd seems to mount just to my account now, i.e. /media/[user1]/[ext hdd], and while all the other users can see the drive mounted they can not access as they just receive a file location error. From their perspective it is mounted just in my profile and not in theirs. I have tried editing the properties of the hdd to allow others to view and create files on the hdd but that has not changed anything. I have also read that this is a new feature to Ubuntu 12.10, the way it mounts via /media/[user]/. So is there a way to have it mount to all the other user accounts too? Thanks!

    Read the article

  • Trust External Surround Soundcard SC-5500p not working

    - by Ederico
    I got the following external sound card to make some awesome noise with my speaker set. It should be plug and play, but it so happens that when I plug it in and hook everything up, there's no sound at all. The speaker set I have works if I plug it in the laptop directly (or rather, if I plug the front speakers cable as I can't plug anything else). http://www.trust.com/products/product.aspx?artnr=14134 Would anyone know how I can workaround this problem and make full use of this external sound card on my Ubuntu 12.04 system?

    Read the article

  • Issues with external mounting after pysdm removed

    - by K. R. Huard
    So, I'm very new to ubuntu. I was having troubles getting my external hard drive to be read/write permission. It's owner is my macbook, and writing on the drive was repeatedly denied. In trying to sort this out, I tried the Nautilus commands (no success), installed the PYSDM application, changed some things (as suggested by this user in this forum http://askubuntu.com/a/113992 )but then found that I was getting an error message whenever I tried to mount an external storage device. The error is: Unable to mount DERPSTICK error mounting: mount exited with exit code 1: helper failed with: [mntent]: line 14 in etc/fstab is bad mount: only root can mount /dev/sdc1/ on /media/sdc1 Others with similar problems put their fstab up here, but I'm not sure how to bring it up, or if I should even try. Thanks for your time!

    Read the article

  • can't chmod on external hard disk?

    - by G. He
    I have an USB3.0 external hard disk, partitioned to 3 NTFS partitions. When I plug the hard disk in, the 3 partitions automatically mounted under /media. So far so good. I can read and write to files, or mkdir, etc on these partitions. But I can't do chmod/chown on any of the files/directories on these partitions. The owner:group always myself, and the mode are always 700 for directories and 600 for files. I have another partition on internal harddisk also mounted. That partition works fine. I looked the output of mount command, the only difference between mount options is that there is one extra 'default_permissions' on the external hard disks. Anyway I can set the owner:group and mode on these files and directories.

    Read the article

  • Philips Monitor problems - vertical lines on screen

    - by asdasd
    I have an old CRT Philips Monitor 17'' and it was working well. There were problems with the electrical power and the monitor started to make some sound and a smoke was getting out of it. I quickly switched it off the power, and in the morning when the power was ok i started the monitor and it appeared to be working and it worked for a couple of minutes when i find out some smell was coming from it, and after 5 minutes the screen i was working shut down and on the monitor some vertical lines appeared - and nothing else. I thought it was the OS, so i rebooted the pc and while it was booting i realized the monitor didn't show the bios info etc, but the same vertical lines on the whole screen were on it, sometimes their color was changing and they were blinking, but no screen appeared - only those vertical lines. After a day, the monitor was ok again - i turned it on and no there were no lines, everything was working fine. The same for the next 2 days. My question is: If anyone had ever had the same problem, can you help me ? THe monitor may be ok now but i am afraid it can get back those lines again. I don't know what to do, if you know please tell me whether should i take it to the service or not. Thank you.

    Read the article

  • Acer makes monitor go to power safe mode unless in safe mode

    - by Babyfriend
    I have an acer aspire x3200 Monitor says no input signal (go to power safe mode) I was only able to use computer in safe mode The computer was on (power safe mode) for two weeks. The monitor is ok with another desktop I tried with a different monitor, same message (monitor goes to power safe mode) Why is this happening and if it's my video card probLem will I be able to replace the video card and solve it? It's currently using GeForce 8200 The NVIDIA® GeForce® 8200 motherboard GPU provides DirectX® 10 and HD movies to everyone. System is Windows Vista™ Thanks

    Read the article

  • External USB Drive

    - by ErocM
    I have a server that I hooked up an external USB drive. It was formatted in windows and has files on it already. I'm new to Ubuntu so please be patient... I have two questions: Will Ubuntu see the drive since it was formatted in windows? How do I mount this drive or rather, how do I know it's seen by Ubuntu? Thanks! I did fdisk -l and this is what I have but I don't see it. It's a 1tb drive: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001eb47 Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM Disk /dev/sdc: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdc doesn't contain a valid partition table Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table Disk /dev/mapper/ubuntu-root: 316.6 GB, 316577677312 bytes 255 heads, 63 sectors/track, 38488 cylinders, total 618315776 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/ubuntu-root doesn't contain a valid partition table Disk /dev/mapper/ubuntu-swap_1: 3217 MB, 3217031168 bytes 255 heads, 63 sectors/track, 391 cylinders, total 6283264 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 this is an external USB hard drive not a thumb drive :)

    Read the article

  • How to mount an external HDD?

    - by Slash
    I have Ubuntu Linux 12.04 version the latest right now.I want to mount an external HDD NTFS 1TB.I have followed many guides but still no success.The error I'm getting is this: Failed to read last sector (1953523119): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? Using Storage Device MAnager i get this error:Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/Skliros_Diskos {external disk name} When I use sudo fdisk -l, this is the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e0bc6 Device Boot Start End Blocks Id System /dev/sda1 * 2048 618854399 309426176 83 Linux /dev/sda2 618856446 625141759 3142657 5 Extended /dev/sda5 618856448 625141759 3142656 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002093a Device Boot Start End Blocks Id System /dev/sdb1 2048 1953525167 976761560 7 HPFS/NTFS/exFAT

    Read the article

  • external hard drive not detected after ubuntu crash [restarting machine]

    - by Netmoon
    today i tried to watch movie [with vlc media player] from my external hard drive [expansion portable 500 GB], and it's play good, then pause the movie and play it again, and my Ubuntu crashed! [Ubuntu 12.04]i had to restart the machine, so did it, but after that Ubuntu can't recognize this hard drive! i changed USB cable but it was not effective. this is my dmesg command result : [ 191.281630] usb 2-1.3: new full-speed USB device number 9 using ehci_hcd [ 191.353527] usb 2-1.3: device descriptor read/64, error -32 [ 191.529115] usb 2-1.3: device descriptor read/64, error -32 [ 191.704669] usb 2-1.3: new full-speed USB device number 10 using ehci_hcd [ 191.776524] usb 2-1.3: device descriptor read/64, error -32 [ 191.952202] usb 2-1.3: device descriptor read/64, error -32 [ 192.127772] usb 2-1.3: new full-speed USB device number 11 using ehci_hcd [ 192.534742] usb 2-1.3: device not accepting address 11, error -32 [ 192.606749] usb 2-1.3: new full-speed USB device number 12 using ehci_hcd [ 193.013696] usb 2-1.3: device not accepting address 12, error -32 [ 193.013906] hub 2-1:1.0: unable to enumerate USB device on port 3 note: I am able to hear the sound of the external drive lens. When attach hard drive to usb port, the status light goes on, but it's low bright and i think its power is low! try to mount in Microsoft Windows 7, but nothing happened.

    Read the article

  • Rotate monitor to portrait on Windows Server 2003 with ATI card

    - by Eli
    Does anyone know if it is possible to rotate a monitor from landscape to portrait mode on Windows Server 2003 32-bit with an ATI video card? According to Dell's site, I should be able to rotate my Dell P2310H monitor by installing drivers from their website, but they don't have drivers for Windows Server 2003. I let Windows Update search for the driver (with the driver CD that came with the monitor in my drive) and it did install drivers, but I still don't see any options for rotating. Some people say that the ATI Catalyst Control Center allows for monitor rotation, but I've never been able to run that software on Windows Server 2003. A google search reports that others have the same problem. Has anyone successfully figured out how to rotate a monitor on Windows Server 2003 with an ATI card?

    Read the article

  • How can I use my laptop's monitor as my PC's ONLY monitor? [closed]

    - by Randell
    Possible Duplicate: Can I use my laptop as a second monitor for my desk computer? My PC's monitor just died and I'm not looking at buying a new monitor anytime soon. So I'm thinking of using my laptop's monitor for it. Both machines are running on Fedora linux. Edit: Both machines are connected to the same wireless network. PC needs to log in before it can connect to the network if I'm not mistaken. Update: This is different from Can I use my laptop as a second monitor for my desk computer? , because that question is asking how to use the laptop screen as the secondary display, not as the only display.

    Read the article

  • Rotate monitor to portrait on Windows Server 2003 with ATI card

    - by user10179
    Does anyone know if it is possible to rotate a monitor from landscape to portrait mode on Windows Server 2003 32-bit with an ATI video card? According to Dell's site, I should be able to rotate my Dell P2310H monitor by installing drivers from their website, but they don't have drivers for Windows Server 2003. I let Windows Update search for the driver (with the driver CD that came with the monitor in my drive) and it did install drivers, but I still don't see any options for rotating. Some people say that the ATI Catalyst Control Center allows for monitor rotation, but I've never been able to run that software on Windows Server 2003. A google search reports that others have the same problem. Has anyone successfully figured out how to rotate a monitor on Windows Server 2003 with an ATI card?

    Read the article

  • Monitor weirdness/flickering with new Viao PCG-3112L

    - by Rosarch
    I have a Sony VAIO PCG-3112L running Windows 7. It worked fine on one monitor, but now I'm using it with a 2 year old LG Flatron W2252TQ-TF. The colors are sorta off (although that might just be the monitor), but more annoyingly there are many horizontal flickering lines. It's more noticeable on non-white backgrounds. I tried rebooting the monitor, and reseting it to factory settings, but that didn't solve the issue. What could be the cause of this? The monitor works fine with an Asus netbook. I have checked that both ends of the VGA cable are plugged in between the Vaio and the monitor.

    Read the article

  • Monitor "forgot" its native resolution overnight

    - by Ben
    I have: Hanns G HW173A monitor NVIDIA GTX 460 graphics card Windows XP SP3. It was working. Suddenly overnight I can no longer use my monitor's native resolution of 1440x900. It's not listed, and if I force it it only shows part of the screen. The only resolution that seems to fit the whole screen is now 1024x768. I have tried reinstalling the NVIDIA drivers as well as disabling and enabling the monitor drivers (for windows XP the monitor uses the microsoft "default monitor" drivers - this is what Hanns G says on their website too). Any ideas? Thanks very much.

    Read the article

  • How do I maximize a window in one monitor and do other things on the other monitor

    - by RoboShop
    Hi, I have windows 7 installed on my laptop which is a Dell studio XPS 16. I recently set up a second monitor for it. I've noticed that when I load up "full maximisation" applications (I don't know the term) like a game or media center on one monitor, I can't seem to do anything with the other monitor. With the game, I can see the other monitor, I can play a movie on it even, but if I click the mouse button on it, it'll stop the game and alt-tab away. In Media Center, I can't even cross my mouse over the other monitor. So my question is, in Windows 7, is it possible to run programs like this that are designed to be run in one maximised window and still be able to do things on the other window?

    Read the article

  • Compaq Presario Laptop Monitor Problems

    - by Nishant
    I am attaching a few pics of my laptop monitor now . Can you please tell me if this is a hardware error which can be rectified by replacing the monitor ? How this happened - I accidently hit my leg on the laptop and jammed it against the wall and ever since the monitor is like this .I plan to replace the Monitor by buying a spare parts laptop that sells in ebay . I wonder if this is a LCD HARDWARE problem or problem with the cable that goes to the monitor . THE OS works fine in the computer .I hope my question is clear . http://img163.imageshack.us/gal.php?g=good1z.jpg

    Read the article

  • Dialogs appear on wrong monitor with SQL Server Management Studio 2008

    - by David
    I am running SSMS 2008 on Windows 7 with a dual monitor setup (one large, one small). SSMS is running on the secondary monitor, but everytime a dialog is opened, the dialog is placed on the primary monitor instead. I've tried moving the dialog over, closing it, and then re-opening it, but it doesn't remember and goes back to the primary monitor. This is really annoying for some of the designer dialogs, is there any way to fix this other than switching SSMS to the primary monitor? Is this a known bug with SSMS, or is it a problem with my particular setup?

    Read the article

  • DVI monitor detected only on computer startup

    - by kamil
    I've recently connected a new monitor, LG M2252D-PZ, to a rather outdated computer with Windows XP and Radeon 9600. XP has SP3 installed, video drivers are the latest version back from the times the video card was still supported. My problem is that the monitor works fine only as long as I don't turn it off or switch it to a different input. When I turn it back on, it says "no signal". The key to the problem must be the DVI port, to which the new monitor is connected. The previous monitor was connected to the VGA output, and I've tested that the new one also works fine when connected to the analogue port. Apparently, the computer tests for the presence of a monitor on the DVI port only on startup. The question is, how do I change this?

    Read the article

  • No sound from external subwoofer "Sonic Master" on an Asus N76VM

    - by Willem
    A few weeks ago I bought a Asus n76vm notebook looking forward to it's 'superior sound'. This sound system compromises a external subwoofer which amplifies bass and is connected to a special output jack. Ubuntu 12.04, however, does not detect this subwoofer. How could this be solved? Any help would be gratefully appreciated http://www.asus.com/Notebooks/Multimedia_Entertainment/N76VM/#specifications

    Read the article

  • Log & monitor mysql databases on servers

    - by user3215
    How MySQL databases logged and monitored on ubuntu servers in real time?. I checked /var/log/mysql.log and found it empty. EDIT 1: The log was not enabled in the mysql configuration file. Now it logs and I could see the logs in the file /var/log/mysql/mysql.log But this could not be sufficient to gather additional information about the database logs. Is there any other way or any popular open source tool?

    Read the article

  • Auto-select external soundcard?

    - by dandelion
    Just got an external usb sound card because my internal speakers broke. The new sound card works just fine after plugging it in and going to System Settings Sound, and then selecting the device. However, I was curious as to whether there was a way to make ubuntu auto-select the device without having to go through System Settings. Can it just be selected upon plugging it in? Any and all help appreciated :)) (ps its running 12.04)

    Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >