Search Results

Search found 217 results on 9 pages for 'faults'.

Page 6/9 | < Previous Page | 2 3 4 5 6 7 8 9  | Next Page >

• Tracking Security Vulnerability remediation

  - by Zypher

  I've been looking into this for a little while, but havn't really found anything suitable. What I am looking for is a system to track security vulnerability remdiation status. Something like "bugzilla for IT" What I am looking for is something pretty simple that allows the following: batch entry of new vulnerabilities that need to be remediated Per user assignment AD/LDAP Authentiation Simple interface to track progress - research, change control status, remediated, etc. Historical search ability Ability to divide by division Ability to store proof of resolution for the Security Team to access Dependency tracking Linux based is best (that's my group :) ) Free is good, but cost doesn't matter so much if the system is worth it The systems doesn't have to have all of these features, but if it did that would be great. yes we could use our helpdesk software, but that has a bunch of pitfalls such as triggering SLA alerts and penalties as well as not easily searchable outside of a group. Most of what I have found are bug tracking systems that are geared towards developers, and are honstely way overkill for what I am looking for. Server Faults input is greatly appreciated as always!

  Read the article

• Apache2 Segmentation fault with wsgi_module

  - by a coder

  Apache 2.2.3 is running as an existing web server under RHEL 5. Attempting to set up Trac using wsgi_module. RHEL 5 ships with python 2.4, so in order to use the current version of Trac (1.0) I needed to install it with easy_install-2.6. Trac works with the default mod_python, however users strongly encourage not using this module as it is officially dead. Using RHEL's package manager, I downloaded/installed python26-mod_wsgi.so. I backed up the httpd.conf, then made the following additions: LoadModule wsgi_module modules/python26-mod_wsgi.so #...# WSGIScriptAlias /trac /www/virtualhosts/trac/deploy/cgi-bin/trac.wsgi <Directory /www/virtualhosts/trac/deploy/cgi-bin> WSGIApplicationGroup %{GLOBAL} Order deny,allow Allow from all </Directory> Next I moved trac.conf to trac.conf.bak (contains mod_python calls). I tested the configuration using: apachectl configtest Syntax is OK. So I reloaded the server config using: service httpd reload At this time, all virtualhosted sites stopped responding. I restored my backup copy of httpd.conf, reloaded the server config, and the virtualhosted sites are being served again. A quick look at the httpd error_log shows: [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28282): Initializing Python. [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28280): Attach interpreter ''. [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1817): proxy: grabbed scoreboard slot 0 in child 28283 for worker proxy:reverse [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1836): proxy: worker proxy:reverse already initialized [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1930): proxy: initialized single connection worker 0 in child 28283 for (*) [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28283): Initializing Python. [Mon Oct 08 10:20:04 2012] [notice] child pid 28249 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28250 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28251 exit signal Segmentation fault (11) There are many similar lines, this is just a snip of the log file. Suggestions on what could be going on to cause the Segmentation faults?

  Read the article

• How do I install git/git-svn on RHEL5 with a custom perl install?

  - by kbosak

  I've had nothing but trouble trying to install Git on RHEL5. First I tried from source, but ran into several issues with installing the docs. There appeared to be missing libs and such for parsing xml that I couldn't figure out how to get installed and recognized. Then I tried using the EPEL yum repository and was able to install git and its docs but now git-svn is not working. It complains about not finding the perl modules Git.pm and SVN/Core.pm. When I set the GITPERLLIB environment variable to the location of those libs it seg faults. Some background: RHEL5 came with perl 5.8.8, but we wanted to use 5.10 so I installed that from source (to a custom location). Someone then symlinked the system perl binary to this newer version of Perl to make sure nobody uses the wrong version. Each developer also has their own build of Perl. So I'm wondering what's the best way to install Git on this system and have both the docs and git-svn working correctly for each user. Unfortunately I'm a developer and not as good with system administration so take it easy on me.

  Read the article

• Linux apache developing configuration

  - by Jeffrey Vandenborne

  Recenly reinstalled my system, and came to a point where I need apache and php. I've been searching a long time, but I can't figure out how to configure apache the best way for a developer computer. The plan is simple, I want to install apache 2 + mysql server so I can develop some php website. I don't want to install lamp though, just the apache2, php5 and mysql. The problem that I've been looking an answer for is the permissions on the /var/www/ folder. I've tried making it my folder using the chown command, followed by a chmod -R 755 /var/www. Most things work then, but fwrite for example won't work, because I need to give write permissions to everyone, unless I change my global umask to 000 I'm not sure what I can do. In short: I want to install apache2, php5, mysql-server without using lamp, but configured in a way so I can open up netbeans, start a project with root in /var/www/, and run every single function without permission faults. Does anyone have experiences or workarounds to this? Extra: OS: Ubuntu 10.04 ARCH: x86_64

  Read the article

• Server 2008 RAID 5 Write Speeds

  - by Solipsism

  I recently configured a RAID 5 partition in Server 2008 with 4 RAID 5 disks. These disks are connected through a SATA expansion card that uses PCIe. This morning, I checked and they had finally finished synchronizing, and so I tried to do some speed tests. Copying off the disks started pretty much fine - speeds began at 125MB/s, then trailed down to about 70MB/s, which I found odd but not worrying. Writing TO the disks however is a completely different story. I attempted to copy some of my VM host ISOs onto the disks (~2-4 GB apiece) and this resulted in speeds of approximately 10MB/s. I tried copying both from a local disk (connected directly to the motherboard) and from another server ththe gigabit network and results were the same. I checked the performance monitor while transferring the files and the only thing that stuck out was that my memory hard faults shot up to 6,000 per minute (spiking around 200/s) by explorer.exe. The system is running 2GB of DDR667 ECC RAM and a quad-core 2.3GHz opteron. Is there anything I can do to fix this performance issue (buy more RAM? move the drives to a faster box?, etc) or am I just screwed so long as I stick to windows.

  Read the article

• How can I remotely display images on my computer?

  - by Jakob

  What I Have: A laptop booted with Ubuntu and a stationary computer dual-booted with Ubuntu and Vista, both connected through a wireless ad-hoc network. What I Want: I want a way to display images in fullscreen on my stationary, using my laptop as a "remote control". I want to be able to choose another picture at any time and have my stationary computer remain in fullscreen mode at all times. Preferably, I should also be able to display just an empty (black) screen. How can I arrange for this? What I Have Tried: I have tried simply SSH:ing into my stationary computer and opening the image files using an image viewer, but all of the ones that I have tried (Eye of Gnome, Mirage, Gwenview, and others) open a new window for every new image. I don't know how to force them into using a single instance. I have tried using the VLC remote control command line interface, but apart from seeming somewhat unreliable (exiting with segmentation faults at one point), it also displays some images with a green border and forces me to pause playback in order for the image to remain on screen. Bonus Question: In my final setup, I also need to play music through my stationary computer's speaker and have the ability to switch to another track at any point, like with the images. Preferably, I would like to control the images and the audio through the same interface. How can I best achieve this?

  Read the article

• How do you notice that the batteries of you wireless mouse are dying out?

  - by hkBattousai

  I have a Logitech M705 wireless mouse. I'm first time using a wireless mouse, so I don't have much experience with the hardware features and behavior. It is rated that it runs for 3 years with the same batteries. I think this "3 year" rating is calculated for a very low usage and activity; like 2 hours a day. I'm using it for about 12 hours a day, so I expect it to run out of batteries in a much shorter time in my case. I have been using it for about half a year. Recently (for the last two weeks), it started to make some peculiar behavior when clicking and drafging objects. - When I click something, it sometimes double click it. - When I drag something from one place to another (or selecting some text), it sometimes drops the object in the halfway (when selecting text, the text which had selected up to that time becomes unselected and it starts to select the rest of the text from that moment), but it goes on being in the "left-button-pressed" state. It is like, the pressed button switches to "unpressed" state for a moment, then returns back to the "pressed" state. When one of these faults occur, it occurs several times sequentially. There is no problem in pointer movement, scrolling or right-clicking. Since the batteries last for a very long time for this device, I don't expect it to stop working in an instance. I expect it to give these kind of syndromes of a time period. My question is; Is this how batteries run out for a wireless mouse? Or, is this another kind of hardware/software problem?

  Read the article

• Implementing emailing (bulk & event based) features for my website.

  - by Kabeer

  Hello. For my upcoming social networking website, I am looking for suggestions on the best way to implement emailing. Here are some of my requirements and constraints: Requirements: - Should be able to send emails based on events (new registrations, change password, etc.), promotions (advertisements based on user consent), bulk mails (newsletters), reminders (profile updates), etc. I hope I got the point through. - Should be able to process faults (incorrect email address, mail-box full, etc) - User initiated invites (inviting friends to connect) Constraints: - As of now I am looking at Godaddy for hosting. Subsequently I shall move to, may be Amazon Cloud. Godaddy seems to be excruciatingly conservative (not bad always) when it comes to the ability to send email. - My tests on Godaddy so far have been discouraging. There is limit to no. of emails I can send and sometimes if emails carries special characters it throws strange exceptions like there was a virus affected attachment (even though I hadn't attached a thing). The replies from Godaddy support have been equally funny. My intent is not to portray Godaddy as wrong but I am looking for a work-around that frees me from said constraints. I am looking for a mechanism / service that is either free of very cost effective. I wonder how other sites address this. Mine is a .Net / Windows based application.

  Read the article

• Can't start Windows 7 after cloning HDD

  - by Paul

  Brief description: cloned HDD1 - HDD2 HDD1 partition 1 boots HDD1 partition 2 boots HDD2 partition 1 boots HDD2 partition 2 doesn't boot Windows, but is bootable in general Now verbosely: In all the cases computer is the same. I have two Windows 7 installations on HDD1 - both are booting fine. I choose between them using standard Windows 7 boot loader menu. Technically there are 4 partitions: 100 MB Boot loader partition (active), Windows 7 copy 1 (25 GB), Windows 7 copy 2 (150 GB) and Working partition. All are primary. In past few days I tried to clone the whole HDD1 to HDD2 of the same size (but 2,5 inch form factor) as is using Minitool Partition wizard. Everything has been copied, all files are accessible, no faults in file system structure, even boot loader wasn't damaged and I hadn't to repair it. But I can boot only first installation of Windows 7 (it boots without issues). When I choose the second installation, I get immediately a completely black screen without any texts, cursors and other data. HDD isn't accessed after that. This black screen is sensitive to Ctrl-Alt-Delete which causes computer reboot. I did some experimenting: Installed Windows 7 to that partition - it booted fine. Then I renamed "Windows" to "Windows.old" and copied Windows directory from HDD1 as it was, using Far Manager, and got the same troubles - black screen. (Of course I performed renaming and copying from other copy of Windows). So, it seems that problems are inside this installation of Windows, somewhere in its files.

  Read the article

• Mac OS X - Time Machine backup fails verification - What can I do to save the history?

  - by usermac75

  Hi, How do I make Time Machine to make a new complete backup without losing older versions of backed up files? Verbose: I am using the Time Machine backup on my OS X (Snow Leopard) to backup the whole computer to an external drive. I especially like the "history", i.e. the feature that allows you to restore the older version of a file. Problem: I had some data corruption on my external backup drive, I repaired it with the System Tool for doing that, it found some faults. I had the disk tool repair the external drive. After that, the external drive was OK and I could use Time Machine again. I let Time Machine do one more backup. Now I made a verification according to http://superuser.com/questions/47628/verifying-time-machine-backups, namely along sudo diff -qr . $HOME/Desktop 2>&1 | tee $HOME/timemachine-diff.log However: After doing the command above, several differences and missing files were reported, approx. 200 files in sum. Whereas some of the missing files were cache or excluded directories, the differences do bother me, especially as some important documents from me are listed as differing. How can I make sure that the data on the external drive is synced correctly? Is it possible to have Time Machine to do a complete new backup without losing the history? Or to have Time Machine compare all files for differences and re-write all files that are different? Or can I set some flags on the files that do not match to have them copied again? (like the archive-flag in Windows/Dos). I'd rather not touch the files because I would like to keep the date of last change/date of creation) Thank you for your thoughts!

  Read the article

• Application that will identify percentage of your system disk bandwidth used on a user-application by user-application basis?

  - by Warren P

  I always (subjectively) feel my computer is far too slow (however fast it is), and so I'm always looking for ways to measure and understand what my computer is actually doing, that is making it seem "slow" to me. It has been my observation that my software-developer workload is most often disk-bound (I am waiting for Disk I/O) more than CPU bound. What has made it worse, is that I am using a corporate PC that has in-memory active-scanning anti-virus software that I do not have control over, and also some IT department mandated services that seem to suck up a lot of available hard-disk bandwidth. The best tool I have seen (in Windows 7) is the Resource Monitor which I usually acess from the button in the task Manager. The disk IO page, however, seems to label Disk Activity at a very low level (for example, showing the Volume Shadow Storage, which is flushing information obviously written by something ELSE other than VSS itself, and then writes to Pagefile.sys, which are obviously due to Virtual Memory faults in some application). What I would like to know is if a utility exists that can add up all direct disk input and output by user-level process, or find the process or service that caused VM or VSS activity. In that way, I hope, you could establish a real idea of how much of your computer's precious disk subsystem bandwidth is attributable to a particular application. here's a scenario: MyApp.exe writes 100k/s and reads 100k/s directly. VSS ends up writing another 100k/s. pagefaults caused inside MyApp.exe cause another 100k/s of writes. So the total "cost" of MyApp.exe running, during a period of time (let's say 1 second) is 400k/s, whereas you can only directly observe half of that, in Resource Monitor. Is there a smarter disk-IO watching piece of software I can use?

  Read the article

• please explain these mongo statistics

  - by sivann

  My setup: I have 2 hosts, and 2 shards each. Host1 has 2 shards, and is the master of the replicas host2 has the secondaries of the 2 shards. . host1: shard1 (repset1),shard2 (repset2) host2: shard1 (repset1),shard2 (repset2) There's also a 3rd host that acts as arbitrer. I have 50 threads writing randomly to both shards (using a hash) via mongos with REPLICA_SAFE WriteConcern set on each insert. The questions: mongostat displays about 90% locked for both shards in host1 and about 1% locked on host2. Since I use REPLICA_SAFE which supposedly writes to both servers shouldn't the locks be the same? mongostat reports qr=30 for both shards of host1, and qw=0 always. Since I perform only writes how is this possible? Moreover on host2 all queues are reported 0. Faults are abut the same in all shards/hosts (arround 80). netIn/netOut on the secondaries (host2) are always about 200bytes/sec. Too low. mongos has 53 connections, host1's shards have 71 and 71 and host2's shards have 9 and 8. How is this? Please answer whatever you can. Thanks!

  Read the article

• Mac OS X - Time Machine backup fails verification - What can I do to save the history?

  - by usermac75

  Hi, How do I make Time Machine to make a new complete backup without losing older versions of backed up files? Verbose: I am using the Time Machine backup on my OS X (Snow Leopard) to backup the whole computer to an external drive. I especially like the "history", i.e. the feature that allows you to restore the older version of a file. Problem: I had some data corruption on my external backup drive, I repaired it with the System Tool for doing that, it found some faults. I had the disk tool repair the external drive. After that, the external drive was OK and I could use Time Machine again. I let Time Machine do one more backup. Now I made a verification according to http://superuser.com/questions/47628/verifying-time-machine-backups, namely along sudo diff -qr . $HOME/Desktop 2>&1 | tee $HOME/timemachine-diff.log However: After doing the command above, several differences and missing files were reported, approx. 200 files in sum. Whereas some of the missing files were cache or excluded directories, the differences do bother me, especially as some important documents from me are listed as differing. How can I make sure that the data on the external drive is synced correctly? Is it possible to have Time Machine to do a complete new backup without losing the history? Or to have Time Machine compare all files for differences and re-write all files that are different? Or can I set some flags on the files that do not match to have them copied again? (like the archive-flag in Windows/Dos). I'd rather not touch the files because I would like to keep the date of last change/date of creation) Thank you for your thoughts!

  Read the article

• SQL SERVER – ASYNC_IO_COMPLETION – Wait Type – Day 11 of 28

  - by pinaldave

  For any good system three things are vital: CPU, Memory and IO (disk). Among these three, IO is the most crucial factor of SQL Server. Looking at real-world cases, I do not see IT people upgrading CPU and Memory frequently. However, the disk is often upgraded for either improving the space, speed or throughput. Today we will look at another IO-related wait type. From Book On-Line: Occurs when a task is waiting for I/Os to finish. ASYNC_IO_COMPLETION Explanation: Any tasks are waiting for I/O to finish. If by any means your application that’s connected to SQL Server is processing the data very slowly, this type of wait can occur. Several long-running database operations like BACKUP, CREATE DATABASE, ALTER DATABASE or other operations can also create this wait type. Reducing ASYNC_IO_COMPLETION wait: When it is an issue related to IO, one should check for the following things associated to IO subsystem: Look at the programming and see if there is any application code which processes the data slowly (like inefficient loop, etc.). Note that it should be re-written to avoid this  wait type. Proper placing of the files is very important. We should check the file system for proper placement of the files – LDF and MDF on separate drive, TempDB on another separate drive, hot spot tables on separate filegroup (and on separate disk), etc. Check the File Statistics and see if there is a higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. Check event log and error log for any errors or warnings related to IO. If you are using SAN (Storage Area Network), check the throughput of the SAN system as well as configuration of the HBA Queue Depth. In one of my recent projects, the SAN was performing really badly and so the SAN administrator did not accept it. After some investigations, he agreed to change the HBA Queue Depth on the development setup (test environment). As soon as we changed the HBA Queue Depth to quite a higher value, there was a sudden big improvement in the performance. It is very likely to happen that there are no proper indexes on the system and yet there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can effectively reduce lots of CPU, Memory and IO (considering cover index has lesser columns than cluster table and all other; it depends upon the situation). You can refer to the following two articles I wrote that talk about how to optimize indexes: Create Missing Indexes Drop Unused Indexes Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• SQL SERVER – IO_COMPLETION – Wait Type – Day 10 of 28

  - by pinaldave

  For any good system three things are vital: CPU, Memory and IO (disk). Among these three, IO is the most crucial factor of SQL Server. Looking at real-world cases, I do not see IT people upgrading CPU and Memory frequently. However, the disk is often upgraded for either improving the space, speed or throughput. Today we will look at an IO-related wait types. From Book On-Line: Occurs while waiting for I/O operations to complete. This wait type generally represents non-data page I/Os. Data page I/O completion waits appear as PAGEIOLATCH_* waits. IO_COMPLETION Explanation: Any tasks are waiting for I/O to finish. This is a good indication that IO needs to be looked over here. Reducing IO_COMPLETION wait: When it is an issue concerning the IO, one should look at the following things related to IO subsystem: Proper placing of the files is very important. We should check the file system for proper placement of files – LDF and MDF on a separate drive, TempDB on another separate drive, hot spot tables on separate filegroup (and on separate disk),etc. Check the File Statistics and see if there is higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. Check event log and error log for any errors or warnings related to IO. If you are using SAN (Storage Area Network), check the throughput of the SAN system as well as the configuration of the HBA Queue Depth. In one of my recent projects, the SAN was performing really badly so the SAN administrator did not accept it. After some investigations, he agreed to change the HBA Queue Depth on development (test environment) set up and as soon as we changed the HBA Queue Depth to quite a higher value, there was a sudden big improvement in the performance. It is very possible that there are no proper indexes in the system and there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can effectively reduce lots of CPU, Memory and IO (considering cover index has lesser columns than cluster table and all other; it depends upon the situation). You can refer to the two articles that I wrote; they are about how to optimize indexes: Create Missing Indexes Drop Unused Indexes Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Types, SQL White Papers, T SQL, Technology

  Read the article

• Python Coding standards vs. productivity

  - by Shroatmeister

  I work for a large humanitarian organisation, on a project building software that could help save lives in emergencies by speeding up the distribution of food. Many NGOs desperately need our software and we are weeks behind schedule. One thing that worries me in this project is what I think is an excessive focus on coding standards. We write in python/django and use a version of PEP0008, with various modifications e.g. line lengths can go up to 160 chars and all lines should go that long if possible, no blank lines between imports, line wrapping rules that apply only to certain kinds of classes, lots of templates that we must use, even if they aren't the best way to solve a problem etc. etc. One core dev spent a week rewriting a major part of the system to meet the then new coding standards, throwing away several suites of tests in the process, as the rewrite meant they were 'invalid'. We spent two weeks rewriting all the functionality that was lost, and fixing bugs. He is the lead dev and his word carries weight, so he has convinced the project manager that these standards are necessary. The junior devs do as they are told. I sense that the project manager has a strong feeling of cognitive dissonance about all this but nevertheless agrees with it vehemently as he feels unsure what else to do. Today I got in serious trouble because I had forgotten to put some spaces after commas in a keyword argument. I was literally shouted at by two other devs and the project manager during a Skype call. Personally I think coding standards are important but also think that we are wasting a lot of time obsessing with them, and when I verbalized this it provoked rage. I'm seen as a troublemaker in the team, a team that is looking for scapegoats for its failings. Since the introduction of the coding standards, the team's productivity has measurably plummeted, however this only reinforces the obsession, i.e. the lead dev simply blames our non-adherence to standards for the lack of progress. He believes that we can't read each other's code if we don't adhere to the conventions. This is starting to turn sticky. Now I am trying to modify various scripts, autopep8, pep8ify and PythonTidy to try to match the conventions. We also run pep8 against source code but there are so many implicit amendments to our standard that it's hard to track them all. The lead dev simple picks faults that the pep8 script doesn't pick up and shouts at us in the next stand-up meeting. Every week there are new additions to the coding standards that force us to rewrite existing, working, tested code. Thank heavens we still have tests, (I reverted some commits and fixed a bunch of the ones he removed). All the while there is increasing pressure to meet the deadline. I believe a fundamental issue is that the lead dev and another core dev refuse to trust other developers to do their job. But how to deal with that? We can't do our job because we are too busy rewriting everything. I've never encountered this dynamic in a software engineering team. Am I wrong to question their adherence to coding standards? Has anyone else experienced a similar situation and how have they dealt with it successfully? (I'm not looking for a discussion just actual solutions people have found)

  Read the article

• Expanding the Partner Ecosystem with Third-Party Plug-ins

  - by Joe Diemer

  Oracle Enterprise Manager’s extensibility capabilities are designed to allow customers and partners to adapt Enterprise Manager for management of heterogeneous environments with Plug-ins and Connectors.  Third-party developers continue to take advantage of Oracle Enterprise Manager’s Extensibility Development Kit (EDK) to build plug-ins to Enterprise Manager 12c, such as F5’s BIG IP Plug-in and Entuity’s Eye of the Storm Network Management Plug-In.  Partners can also validate their plug-ins through the Oracle Validated Integration (OVI) program, which assures customers that the plug-in has been tested and is functionally and technically sound, is designed in a reliable and standardized manner, and operates and performs as documented.   Two very recent examples of partners which have beta versions of their plug-ins are Blue Medora's VMware vSphere plug-in and the NetApp Storage plug-in.  VMware vSphere Plug-in by Blue Medora Blue Medora, an Oracle Partner Network (OPN) “Gold” member, which just announced that it is now signing up customers to try a beta version of their new VMware vSphere plug-in for Enterprise Manager 12c.  According to Blue Medora, the vSphere plug-in monitors critical VMware metrics (CPU, Memory, Disk, Network, etc) at the Host, VM, Cluster and Resource Pool levels.  It has minimal performance impact via an “agentless” approach that requires no installation directly on VMware servers.  It has discovery capabilities for VMware Datacenters, ESX Hosts, Clusters, Virtual Machines, and Datastores.  It offers integration of native VMware Events into Enterprise Manager, and it provides over 300 VMware-related health, availability, performance, and configuration metrics.  It comes with more than 30 out-of-the-box pre-defined thresholds and can manage VMware via a series of jobs split between cluster, host and VM target types.The company reports that the Enterprise Manager 12c plug-in supports vSphere versions 4.0, 4.5 and 5.0.  Platforms supported include Linux 64-bit, Windows, AIX and Solaris SPARC and x86.  Information about the plug-in, including how to sign up for the beta, is available at their web site at http://bluemedora.com after selecting the "Products" tab. NetApp Storage Plug-in NetApp believes the combination of storage system monitoring with comprehensive management of Oracle systems with Enterprise Manager will help customers reduce the cost and complexity of managing applications that rely on NetApp storage and Oracle technologies.  So, NetApp built a plug-in and reports that it has comprehensive availability and performance information for NetApp storage systems.  Using the plug-in, Oracle Enterprise Manager customers with NetApp storage solutions can track the association between databases and storage components and thereby respond to faults and IO performance bottlenecks quickly. With the latest configuration management capabilities, one can also perform drift analysis to make sure all storage systems are configured as per established gold standards. The company is also now signing up beta customers, which can be done at the NetApp Communities site at https://communities.netapp.com/groups/netapp-storage-system-plug-in-for-oem12c-beta. Learn More about Enterprise Manager Extensibility More plug-ins from other partners are soon to come, which I'll be reporting on them here.  To learn more about Enterprise Manager and how customers and partners can build plug-ins using the EDK to manage a multi-vendor data center, go to http://oracle.com/enterprisemanager in the Heterogeneous Management solution area.  The site also lists the plug-ins available with information on how to obtain them.  More info about the Oracle Validated Integration program can be found at the OPN Enterprise Manager Knowledge Zone in the "Develop" tab.

  Read the article

• Oracle Enterprise Manager Ops Center 12c Update 1 is available now

  - by Anand Akela

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Following the announcement of Oracle Enterprise Manager Ops Center 12c on April 4th, we are happy to announce the release of Oracle Enterprise Manager Ops Center 12c update 1. This is a bundled patch release for Oracle Enterprise Manager Ops Center.  Here are the key features of the Oracle Enterprise Manager Ops Center 12c update 1 : Oracle VM SPARC Server Pool HA Policy  Automatically Upgrade from Ops Center 11g update 3 and Ops Center 12c  Oracle Linux 5.8 and 6.x Support  Oracle VM SPARC IaaS (Virtual Datacenters) WANBoot Improvements with OBP Handling Enhancements SPARC SuperCluster Support Stability fixes This new release contains significant enhancements in the update provisioning, bare metal OS provisioning, shared storage management, cloud/virtual datacenter, and networking management sections of the product.  With this update, customers can achieve better handling of ASR faults, add networks and storage to virtual guests more easily, understand IPMP and VLAN configurations better, get a more robust LDAP integration, get  virtualization aware firmware patching, and observe improved product performance across the board.  Customers can now accelerate Oracle VM SPARC and T4 deployments into production . Oracle Enterprise Manager Ops Center 11g and Ops Center 12c customers will now notice the availability of new product update under the Administration tab within the  Browser User Interface (BUI) .  Upgrade process is explained in detail within the Ops Center Administration Guide under “Chapter 10: Upgrading”.  Please be sure to read over that chapter and the Release Notes before upgrading.  During the week of July 9th,  the full download of the product will be available from the Oracle Enterprise Manager Ops Center download website.  Based on the customer feedback, we have changed the updates to include the entire product. Customers no longer need to install Ops Center 12c and then upgrade to the update 1 release.  The can simply install Ops Center 12c update 1 directly.  Here are some of the resources that can help you learn more about the Oracle Enterprise Manager Ops Center and the new update 1. Oracle Enterprise Manager Ops Center OTN site Bi-Monthly Product Demos Oracle Enterprise Manager Ops Center Forum Oracle Enterprise Manager Ops Center MOS Community Watch the recording of Oracle Enterprise Manager 12c launch webcast by clicking the following banner. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• How to recover after embarrassing yourself and your company?

  - by gaearon

  I work in an outsourcing company in Russia, and one of our clients is a financial company located in USA. For the last six months I have been working on several projects for this particular company, and as I was being assigned a larger project, I was invited to work onsite in USA in order to understand and learn the new system. Things didn't work out as well as I hoped because the environment was messy after original developers, and I had to spent quite some time to understand the quirks. However we managed to do the release several days ago, and it looks like everything's going pretty smooth. From technical perspective, my client seems to be happy with me. My solutions seem to work, and I always try to add some spark of creativity to what I do. However I'm very disorganized in a certain sense, as I believe many of you fellas are. Let me note that my current job is my first job ever, and I was lucky enough to get a job with flexible schedule, meaning I can come in and out of the office whenever I want as long as I have 40 hours a week filled. Sometimes I want to hang out with friends in the evening, and days after that I like to have a good sleep in the morning—this is why flexible schedule (or lack of one) is ideal fit for me. [I just realized this paragraph looks too serious, I should've decorated it with some UNICORNS!] Of course, after coming to the USA, things changed. This is not some software company with special treatment for the nerdy ones. Here you have to get up at 7:30 AM to get to the office by 9 AM and then sit through till 5 PM. Personally, I hate waking up in the morning, not to say my productivity begins to climb no sooner than at 5 o'clock, i.e. I'm very slow until I have to go, which is ironic. Sometimes I even stay for more than 8 hours just to finish my current stuff without interruptions. Anyway, I could deal with that. After all, they are paying for my trip, who am I to complain? They need me to be in their working hours to be able to discuss stuff. It makes perfect sense that fixed schedule doesn't make any sense for me. But it does makes sense that it does make sense for my client. And I am here for client, therefore sense is transferred. Awww, you got it. I was asked several times to come exactly at 9 AM but out of laziness and arrogance I didn't take these requests seriously enough. This paid off in the end—on my last day I woke up 10 minutes before final status meeting with business owner, having overslept previous day as well. Of course this made several people mad, including my client, as I ignored his direct request to come in time for two days in the row, including my final day. Of course, I didn't do it deliberately but certainly I could've ensured that I have at least two alarms to wake me up, et cetera...I didn't do that. He also emailed my boss, calling my behavior ridiculous and embarrassing for my company and saying “he's not happy with my professionalism at all”. My boss told me that “the system must work both in and out” and suggested me to stay till late night this day working in a berserker mode, fixing as many issues as possible, and sending a status email to my client. So I did, but I didn't receive the response yet. These are my questions to the great programmers community: Did you have situations where your ignorance and personal non-technical faults created problems for your company? Were you able to make up for your fault and stay in a good relationship with your client or boss? How? How would you act if you were in my situation?

  Read the article

• Managing Operational Risk of Financial Services Processes – part 2/2

  - by Sanjeev Sharma

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} In my earlier blog post, I had described the factors that lead to compliance complexity of financial services processes. In this post, I will outline the business implications of the increasing process compliance complexity and the specific role of BPM in addressing the operational risk reduction objectives of regulatory compliance. First, let’s look at the business implications of increasing complexity of process compliance for financial institutions: · Increased time and cost of compliance due to duplication of effort in conforming to regulatory requirements due to process changes driven by evolving regulatory mandates, shifting business priorities or internal/external audit requirements · Delays in audit reporting due to quality issues in reconciling non-standard process KPIs and integrity concerns arising from the need to rely on multiple data sources for a given process Next, let’s consider some approaches to managing the operational risk of business processes. Financial institutions considering reducing operational risk of their processes, generally speaking, have two choices: · Rip-and-replace existing applications with new off-the shelf applications. · Extend capabilities of existing applications by modeling their data and process interactions, with other applications or user-channels, outside of the application boundary using BPM. The benefit of the first approach is that compliance with new regulatory requirements would be embedded within the boundaries of these applications. However pre-built compliance of any packaged application or custom-built application should not be mistaken as a one-shot fix for future compliance needs. The reason is that business needs and regulatory requirements inevitably out grow end-to-end capabilities of even the most comprehensive packaged or custom-built business application. Thus, processes that originally resided within the application will eventually spill outside the application boundary. It is precisely at such hand-offs between applications or between overlaying processes where vulnerabilities arise to unknown and accidental faults that potentially result in errors and lead to partial or total failure. The gist of the above argument is that processes which reside outside application boundaries, in other words, span multiple applications constitute a latent operational risk that spans the end-to-end value chain. For instance, distortion of data flowing from an account-opening application to a credit-rating system if left un-checked renders compliance with “KYC” policies void even when the “KYC” checklist was enforced at the time of data capture by the account-opening application. Oracle Business Process Management is enabling financial institutions to lower operational risk of such process ”gaps” for Financial Services processes including “Customer On-boarding”, “Quote-to-Contract”, “Deposit/Loan Origination”, “Trade Exceptions”, “Interest Claim Tracking” etc.. If you are faced with a similar challenge and need any guidance on the same feel free to drop me a note.

  Read the article

• GMLib Could not complete the operation due to error 80020101

  - by Pierrie

  I get this error "Could not complete the operation due to error 80020101." at random times when displaying a map with a marker on it. I use Delphi 2007 and GMLib [1.2.0 Final]. I have read up on the issue and some suggestions was that the problem is due to commenting or bad syntax in java code, and it was suggested that i take out all the commenting and check for errors in the java code. This i did, i recompiled and reinstalled GMLib after modifying the map.html file. I stripped it of all commenting and parsed it through ie for faults but found none, as expected. But the problem still occurs. Here is a sample of my code to show the map and add the marker : Var newmarker : TMarker; begin newmarker := GMMarker1.Add(); newmarker.Position.Lat := MarkersToPaint[i].Latitude; newmarker.Position.Lng := MarkersToPaint[i].Longitude; newmarker.Visible := True; newmarker.Title := MarkersToPaint[i].Title; GMMap1.RequiredProp.Center.Lat := midlat; GMMap1.RequiredProp.Center.Lng := midlong; GMMap1.RequiredProp.Zoom := 18; GMMarker1.ShowElements; GMMap1.Active := True; Any help in this matter will be greatly appreciated.

  Read the article

• How to analyze 'dbcc memorystatus' result in SQL Server 2008

  - by envykok

  Currently i am facing a sql memory pressure issue. i have run 'dbcc memorystatus', here is part of my result: Memory Manager KB VM Reserved 23617160 VM Committed 14818444 Locked Pages Allocated 0 Reserved Memory 1024 Reserved Memory In Use 0 Memory node Id = 0 KB VM Reserved 23613512 VM Committed 14814908 Locked Pages Allocated 0 MultiPage Allocator 387400 SinglePage Allocator 3265000 MEMORYCLERK_SQLBUFFERPOOL (node 0) KB VM Reserved 16809984 VM Committed 14184208 Locked Pages Allocated 0 SM Reserved 0 SM Committed 0 SinglePage Allocator 0 MultiPage Allocator 408 MEMORYCLERK_SQLCLR (node 0) KB VM Reserved 6311612 VM Committed 141616 Locked Pages Allocated 0 SM Reserved 0 SM Committed 0 SinglePage Allocator 1456 MultiPage Allocator 20144 CACHESTORE_SQLCP (node 0) KB VM Reserved 0 VM Committed 0 Locked Pages Allocated 0 SM Reserved 0 SM Committed 0 SinglePage Allocator 3101784 MultiPage Allocator 300328 Buffer Pool Value Committed 1742946 Target 1742946 Database 1333883 Dirty 940 In IO 1 Latched 18 Free 89 Stolen 408974 Reserved 2080 Visible 1742946 Stolen Potential 1579938 Limiting Factor 13 Last OOM Factor 0 Page Life Expectancy 5463 Process/System Counts Value Available Physical Memory 258572288 Available Virtual Memory 8771398631424 Available Paging File 16030617600 Working Set 15225597952 Percent of Committed Memory in WS 100 Page Faults 305556823 System physical memory high 1 System physical memory low 0 Process physical memory low 0 Process virtual memory low 0 Procedure Cache Value TotalProcs 11382 TotalPages 430160 InUsePages 28 Can you lead me to analyze this result ? Is it a lot execute plan have been cached causing the memory issue or other reasons?

  Read the article

• Best practices for class-mapping with SoapClient

  - by Foofy

  Using SoapClient's class mapping feature and it's pretty sweet. Unfortunately the SOAP service we're using has a bunch of read-only properties on some of the objects and will throw faults if the properties are passed back as anything but null. Need to filter out the properties before they're used in the SOAP call and am looking for advice on the best way to do it. So far the options are: Stick to a convention where I use getter and setter functions to manipulate the properties, and use property overloading to filter method access since only SoapClient would be doing that. E.g. developers would access properties like this: $obj->getAccountNumber() SoapClient would access properties like this: $obj->accountNumber I don't like this because the properties are still exposed and things could go wrong if developers don't stick to convention. Have a wrapper for SoapClient that sets a public property the mapped objects can check to see if the property is being accessed by SoapClient. I already have a wrapper that assigns a reference to itself to all the mapped objects. class SoapClientWrapper { public function __soapCall($method, $args) { $this->setSoapMode(true); $this->_soapClient->__soapCall($method, $args); $this->setSoapMode(false); } } class Invoice { function __get($val) { if($this->_soapClient->getSoapMode()) { return null; } else { return $this->$val; } } } This works but it doesn't feel right and seems a bit clunky. Do the mapping manually, and don't use SoapClient's mapping features. I'd just have a function on all the mapped objects that returns the safe-to-send properties. Also, nobody would have access to properties they shouldn't since I could enforce getters and setters. A lot more work, though.

  Read the article

• TableView Cells unresponsive

  - by John Donovan

  I have a TableView and I wish to be able to press several cells one after the other and have messages appear. At the moment the cells are often unresponsive. I found some coed for a similar problem someone was kind enough to post, however, although he claimed it worked 100% it doesn't work for me. The app won't even build. Here's the code: -(UIView*) hitTest:(CGPoint)point withEvent:(UIEvent*)event { // check to see if the hit is in this table view if ([self pointInside:point withEvent:event]) { UITableViewCell* newCell = nil; // hit is in this table view, find out // which cell it is in (if any) for (UITableViewCell* aCell in self.visibleCells) { if ([aCell pointInside:[self convertPoint:point toView:aCell] withEvent:nil]) { newCell = aCell; break; } } // if it touched a different cell, tell the previous cell to resign // this gives it a chance to hide the keyboard or date picker or whatever if (newCell != activeCell) { [activeCell resignFirstResponder]; self.activeCell = newCell; // may be nil } } // return the super's hitTest result return [super hitTest:point withEvent:event]; } With this code I get this warning: that my viewController may not respond to pointsInside:withEvent (it's a TableViewController). I also get some faults: request for member 'visibleCells' in something not a structure or a union. incompatible type for argument 1 of pointInsideWithEvent, expression does not have a valid object type and similar. I must admit I'm not so good at reading other people's code but I was wondering whether the problems here are obvious and if so if anyone could give me a pointer it would be greatly appreciated.

  Read the article

• Testing fault tolerant code

  - by Robert

  I’m currently working on a server application were we have agreed to try and maintain a certain level of service. The level of service we want to guaranty is: if a request is accepted by the server and the server sends on an acknowledgement to the client we want to guaranty that the request will happen, even if the server crashes. As requests can be long running and the acknowledgement time needs be short we implement this by persisting the request, then sending an acknowledgement to the client, then carrying out the various actions to fulfill the request. As actions are carried out they too are persisted, so the server knows the state of a request on start up, and there’s also various reconciliation mechanisms with external systems to check the accuracy of our logs. This all seems to work fairly well, but we have difficult saying this with any conviction as we find it very difficult to test our fault tolerant code. So far we’ve come up with two strategies but neither is entirely satisfactory: Have an external process watch the server code and then try and kill it off at what the external process thinks is an appropriate point in the test Add code the application that will cause it to crash a certain know critical points My problem with the first strategy is the external process cannot know the exact state of the application, so we cannot be sure we’re hitting the most problematic points in the code. My problem with the second strategy, although it gives more control over were the fault takes, is I do not like have code to inject faults within my application, even with optional compilation etc. I fear it would be too easy to over look a fault injection point and have it slip into a production environment.

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9  | Next Page >