Search Results

Search found 181 results on 8 pages for 'hostnames'.

Page 6/8 | < Previous Page | 2 3 4 5 6 7 8  | Next Page >

  • DNS requests failing from computers that can ping DNS server

    - by dunxd
    I have a situation where computers in some of our remote offices from time to time lose the ability to use our DNS server (in head office) to resolve hostnames. The offices are connected via VPN using Cisco ASA 5505 (VPNclient config rather than Site to Site). Ping to the IP address of the DNS server works. But nslookup will get a "no response from server" message. Computers in other locations can use DNS fine. This is an intermittent problem. One day/hour it works, another it doesn't. Other offices connected in the same way work when another doesn't. No config changes have been made on routers around the time we see the problem. Some users have reported that the problem goes away after doing a repair connection in Windows XP. I think this could be caused by the DNS cache being flushed as part of this - the Windows DNS cache makes the intermittent problem look less so because it caches failed lookups as well as successful ones. However, it is possible some other aspect of Windows is involved. Windows 7 clients have also had the same problem. Any pointers on deeper troubleshooting, or anyone else found this?

    Read the article

  • 553-Message filtered - HELO Name issue?

    - by g18c
    I am having major issues sending from my SBS2011 machine to Message labs server-13.tower-134.messagelabs.com #553-Message filtered. Refer to the Troubleshooting page at 553-http://www.symanteccloud.com/troubleshooting for more 553 information. (#5.7.1) ## I have changed the IP and hostnames from the below. I am not on any IP or domain blacklists. I have setup SPF (which includes mailchimp servers): v=spf1 mx a ip4:95.74.157.22/32 a:remote.mydomain.com include:servers.mcsv.net ~all I am sure i have setup my HELO names correctly under the Exchange Management console, sending a test email from the SBS server and looking at the header shows the following: X-Orig-To: [email protected] X-Originating-Ip: [95.74.157.22] Received: from [95.74.157.22] ([95.74.157.22:52194] helo=remote.mydomain.com) by smtp50.gate.ord1a.rsapps.net (envelope-from <[email protected]>) (ecelerity 2.2.3.49 r(42060/42061)) with ESMTP id 11/90-10010-E529C835; Mon, 02 Jun 2014 11:04:09 -0400 Received: from MYSBSSVR.mydomain.local ([fe80::3159:95a6:23f:1bef]) by MYSBSSVR.mydomain.local ([fe80::3159:95a6:23f:1bef%10]) with mapi id 14.01.0438.000; Mon, 2 Jun 2014 19:03:56 +0400 Is is the main helo name there OK and do i need to worry about the second Received block where the MYSBSVR.mydomain.local is mentioned? I have asked the ISP to set the reverse DNS for my IP to remote.mydomain.com but they have instead put remote.MYDOMAIN.com - would this case cause HELO lookups to classify this as not matching? Anything else I can do to find out why i am being filtered?

    Read the article

  • BIND master/slave does not respond for queries for its slave

    - by Savas
    Systems are all Centos 6.2 Lets say I have a masterdns with IP 10.2.1.2, authoritative for the 10.2.1.X subnet and let say it is domain example.com I have another two subnets, 10.2.2.X and 10.1.2.X Each one has its own DNS server, dns2 and dns1 respectively and let say these are domains dom2.example.com and dom2.example.com respectively. The masterdns server has slave zones for dns1, dns2 and respond to requests OK. The dns1, dns2 have the masterdns zones as slaves two, and respond to requests OK. So, the masterdns has as slave zones all the subordinate domains of example.com Each of dns1 and dns2 use masterdns as a forwards (which uses another dns cache/proxy server) for dns resolution of internet public domain names. It works OK that too. The problem is, and I cannot figure it out. Why queries for example at dns1 for hostnames of dom2.example.com do not resolve? If i use nslookup - masterdns at dns1 server, resolve (i use directly the dns facility of masterdns). If I use nslookup locally, meaning queries are sent to dns1, for hosts that are at dom2.example.com, they do not resolve. Everything other works OK.

    Read the article

  • Online computer not responding to pings

    - by mastercork889
    I was doing a bit of scanning on my network lately, knew all the hostnames to each computer connected. But whilst pinging one of them ping returned Request timed out.. This is strange as I know the computer is online and that the computer responds correctly to pinging on a different (enterprise) network. Is there something on the computer, my network, or my computer that is bugging with this? - That's just a sub-question, I don't expect this to be the main answer. The real question: Why does this happen? Why does pinging the IP4 address not work? EDIT : Pinging the Hostname used to default to the IP4 address, but now it defaults to the IP6 address. Why does this happen? But now that it pings using IP6, how come it all of a sudden works? > ping -6 THE_COMPUTER Pinging THE_COMPUTER [lengthy IP6 address] with 32 bytes of data: Reply from [lengthy IP6 address]: time=1ms Reply from [lengthy IP6 address]: time=1ms Reply from [lengthy IP6 address]: time=1ms Reply from [lengthy IP6 address]: time=1ms Ping stats: Sent = 4, Recieved = 4, Lost = 0 (0% loss) But when this is done using IP4 it doesn't work. So there are now two questions: How come IP6 works and not IP4? Why does IP4 not work?

    Read the article

  • IIS 7.5 returning 404 for unknown host names

    - by WaldenL
    This just doesn't seem correct to me, so I'm looking for someone to tell me how I've misconfigured IIS... Configuration is IIS7.5 (2008R2), without SP1. I have IIS 7.5 configured w/several sites. ALL sites have hostnames defined in the bindings, there is NO site w/out a hostname. However, if I request an unknown hostname from the server IIS (technically Microsoft-HTTPAPI/2.0) return a 404 error, not a 400 error. I would expect a 400 (or some other major error) rather than a lowly 404. This causes a problem when I have nginx in front of multiple IISs and want to stop a site so nginx takes it out of rotation. Since IIS still returns a 404 for the request even when there is no active site for that name, nginx doesn't know the server is dead. NB: IIS returns the 404 regardless of whether there is a server, but it's stopped, or there is no server. Thoughts? Solutions? -- Additional info: OK, I added a site on a port other than 80 (5000) and then on a connection to that port asked for a site that doesn't exist, and I get the expected error 400 (Invalid hostname). So, while IIS isn't listening for generic (no host name) connections on port 80 it would seem that something is. Any ideas how to get HTTPSys to dump the list of what it's listening for?

    Read the article

  • virtualbox instances dedicated-server with custom dnsmasq

    - by ovanes
    I have dedicated server where I planned to run virtualbox virtual machines. Since the VMs are managed with vagrant/chef I may end up with many different ones. I thought it would be a great idea to deploy a dnsmasq on the server, which is going to dynamically assign the ip addresses to the VMs. Since each Vagrant/Chef recipe is configured to set the VM's host name I can find/reference the appropriate VM by the host name. Finally, the entire infrastructure is not directly accessible via internet, so the dedicated Server is the OpenVPN host. So the entire infrastructure may be seen as: +-------------------------------------+ | Dedicated Server | | | | +-------------+ +------------+ | +------------------+ | | DNSMasq | | OpenVPN |<==========>| Client | | +-------------+ +------------+ | | | | ^ ^ | +------------------+ | | | | | +--+ | | | | +-------+ | | | | VM1 | | | | +-------+ | | | ... | | | +-------+ | | +-| VM2 | | | +-------+ | +-------------------------------------+ Now some questions which I am struggling with: Are there any other suggestions to access private infrastructure, because I don't want to reinvent the wheel. On the Dedicated Server I don't see the vboxnet0 interface but VirtualBox is installed without GUI. Accessing of virtual boxes via ssh works fine. Did I miss smth? DNSMasq must serve the local VMs only, otherwise there is a chance that local DNSMasq start to serve other server's on the network, what I don't want. Because I don't see vboxnet0 I tend to use no-dhcp-interface=eth0 config option. Are there any thoughts on that despite, the fact that a second NW-card (which is not the case), might start serving DHCP-Requests? How should I config the VM's network interface that I am able to access it via OpenVPN and resolve the hostnames using the DNSMasq. I think it should be the host-only network card. Should I do bridging in the OpenVPN config or is it sufficient to use routing.

    Read the article

  • Standards for documenting/designing infrastructure

    - by Paul
    We have a moderately complex solution for which we need to construct a production environment. There are around a dozen components (and here I'm using a definition of "component" which means "can fail independently of other components" - e.g. an Apache server, a Weblogic web app, an ftp server, an ejabberd server, etc). There are a number of weblogic web apps - and one thing we need to decide is how many weblogic containers to run these web apps in. The system needs to be highly available, and communications in and out of the system are typically secured by SSL Our datacentre team will handle things like VLAN design, racking, server specification and build. So the kinds of decisions we still need to make are: How to map components to physical servers (and weblogic containers) Identify all communication paths, ensure all are either resilient or there's an "upstream" comms path that is resilient, and failover of that depends on all single-points of failure "downstream". Decide where to terminate SSL (on load balancers, or on Apache servers, for instance). My question isn't really about how to make the decisions, but whether there are any standards for documenting (especially in diagrams) the design questions and the design decisions. It seems odd, for instance, that Visio doesn't have a template for something like this - it has templates for more physical layout, and for more logical /software architecture diagrams. So right now I'm using a basic Visio diagram to represent each component, the commms between them with plans to augment this with hostnames, ports, whether each comms link is resilient etc, etc. This all feels like something that must been done many times before. Are there standards for documenting this?

    Read the article

  • Proxy auto-config dnsResolve doesn't seem to resolve subdomains

    - by HorusKol
    We're running on a Windows domain, and have a DNS to control computer names on our intranet. The following PAC works great for basic hostnames on our intranet - but we're setting up some subdomain-like names (example, redesign.buildbox), and it isn't resolving these. These subdomains are resolvable through other means (such as nslookup). Other than checking to see if the host has ".buildbox" or other domain, is there a way to make it work? Maybe I could try appending the Windows domain to host (can you concatenate strings in a PAC)? function FindProxyForURL(url, host) { // If IP address is internal or hostname resolves to internal IP, send direct. var resolved_ip = dnsResolve(host); if (isInNet(resolved_ip, "129.2.2.0", "255.255.255.128")) return "DIRECT"; if (isInNet(resolved_ip, "10.1.1.0", "255.255.255.0")) return "DIRECT"; if (isInNet(resolved_ip, "150.1.2.0", "255.255.255.248")) return "DIRECT"; // All other traffic uses below proxies, in fail-over order. return "PROXY 192.111.222.111:8080; DIRECT"; }

    Read the article

  • Nginx, as reverse proxy, could not proxy_pass to a domain pointing to the local JBOSS

    - by larryzhao
    My environment is Ubuntu 12.04, Nginx 1.20, and Torquebox 2.0.3 which is actually JBoss AS 7. I have two app deployed on Torquebox, it listens to 8080 and have different hostnames, app1.mydomain.com and app2.mydomain.com. I added 127.0.0.1 app1.mydomain.com and 127.0.0.1 app2.mydomain.com in /etc/hosts then I curl app1.mydomain.com:8080 and curl app2.mydomain.com:8080 both have correct return. Then I go to my nginx. I would like nginx to pass the visit to www.app1.com to app1.mydomain.com:8080, so I have the following configuration: # primary server - proxypass to torquebox server { listen 80; server_name www.app1.com; access_log off; error_log off; # proxy to Torquebox location / { proxy_pass http://app1.mydomain:8080/; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_max_temp_file_size 0; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; } } But it doesn't work. curl www.app1.com returns nothing. And if I visit www.app1.com in Safari, the http return code is 404. I don't know why, need help.

    Read the article

  • Serving images from another hostname vs Apache overload for the rewrites

    - by luison
    We are trying to improve further the speed of some sites with older HTML in order as well to obtain better SEO results. We have now applied some minify measures, combined html, css etc. We use a small virtualized infrastructure and we've always wanted to use a light + standar http server configuration so the first one can serve images and static contents vs the other one php, rewrites, etc. We can easily do that now with a VM using the same files and conf of vhosts (bind mounts) on apache but with hardly any modules loaded. This means the light httpd will have smaller fingerprint that would allow us to serve more and quicker, have more minSpareServer running, etc. So, as browsers benefit from loading static content from different hostnames as well, we've thought about building a rewrite rule on our main server (main.com) to "redirect" all images and css *.jpg, *.gif, *.css etc to the same at say cdn.main.com thus the browser being able to have more connections. The question is, assuming we have a very complex rewrite ruleset already (we manually manipulate many old URLs for SEO) will it be worth? I mean will the additional load of main's apache to have to redirect main.com/image.jpg (I understand we'll have to do a 301) to cdn.main.com/image.jpg + then cdn.main.com having to serve it, be larger than the gain we would be archiving on the browser? Could the excess of 301s of all images on a page be penalized by google? How do large companies work this out, does the original code already include images linked from the cdn with absolute paths?

    Read the article

  • How can I configure myhostname to work with Postfix?

    - by John Kelly Ferguson
    I'm going through the process of setting up a Discourse forum on my server (Ubuntu 12.04 x64) and am getting stuck at the point where I have to configure mailers. I'm following Discourse's instructions and am stuck trying to configure postfix for Mandrill. It is says to check my fully-qualified domain name by typing hostname -f When I enter in hostname -f, I get localhost. As far as I know, entering in hostname -f should return mydomainname.com. When I just enter in hostname, I get mydomainname which is correct because that is what I set my hostname to in /etc/hostname. Looking at some of my other settings, my /etc/hosts file reads: 127.0.0.1 localhost mydomainname # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters And in my /etc/postfix/main.cf file, I have myhostname set like this: myhostname = mydomainname.mydomainname.com (Should this be myhostname = mail.mydomainname.com instead?) And mydestination is the following: mydestination = mydomainname.com, localhost, localhost.localdomain, localhost I'm not that familiar with configuring hostnames. I've been reading Postfix's instructions, but haven't been able to figure it out yet. Any help on how to get this to work would be greatly appreciated. Thanks.

    Read the article

  • Why can't a PC with 2 network cards be accessed by hostname?

    - by lewis
    I set up PC with 2 network cards, connected to the same LAN. I can connect to this PC (e.g. by remote desktop) only via ip-addresses. Accessing by hostname does not work. Why is this the case? UPDATE: Full environment 1. PC with 2 hardware network adapters. 2. On this PC installed VMWare Workstation. Created 3 VM's, networked by "bridged" network setting in VMWare. 3. In LAN all ip-addresses given from DHCP. 4. Win2k8 on all hosts (both physical and vitrual). As result: 1. PC has 2 ip-address (e.g. 192.168.1.71 and 192.168.1.72). PC available in LAN by ip-addreses, but not avail by hostname. 2. VM's has own ip-addr on each (e.g. 192.168.1.73, *74, *75 etc). They are available from LAN by their ip's, BUT not by their hostnames. How can I access to PC and to VM's by hostname?

    Read the article

  • With puppet, can you have the client ask to be a certain set of roles?

    - by Aitch
    I've recently got my puppetmaster and client up and running and have had the client correctly signed, then requested and applied simple changes, all good. I have a growing number of machines (100). They are not consistently named (historical reasons). They fall into a handful of categories (think of it like: dataserver_type1, dataserver_type2, webserver_type1, webserver_type2....). New instances of these types of machines are added weekly. I don't understand (yet) or cannot see how I can declare a "generic" node of (say) "dataserver_type1" that contains whatever modules it needs, and set something in the client puppet.conf that says "I am a dataserver_type1" without using the hostname/FQDN If I set the node name in the catalog as (say) "my-data-server-type1" - the certified hostname - it picks it up and works. I know you can use patterns for hostnames but as I said, my server names are not consistent, and I can't change them. This seems disingenuous to have to edit a file and manually add a node for each server, when they continue to grow. Edit: Digging deeper, it seems roles may be what I want. But there still seems to be an element whereby the master has contain a list of roles that a specific named server should do. Perhaps what I am asking is, how can a client say "I want to be this role", without the server having to be updated?

    Read the article

  • Why does Google Analytics use two domains?

    - by AKeller
    I'm building a distributed widget that is comparable to Google Analytics. Users will add a <script> tag to their site that references my widget's JavaScript file. The Google Analytics tracking code looks like this: var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-XXXXXXXX-X']); _gaq.push(['_trackPageview']); (function () { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); Can anyone explain the reasoning behind separate HTTP and HTTPS hostnames? My instinct is to just secure the www address and then use the protocol-less syntax, like //www.google-analytics.com/ga.js. But I'm sure the Google Analytics architects put a lot of thought into this approach. I'd love to understand their logic before I follow/ignore their model.

    Read the article

  • Is it possible to map static IP to computer name instead of MAC address?

    - by xenon
    I have a number of computers with different hostnames connected to the network. They currently hold a static IP address based on their MAC address. In other words, the static IP address is mapped to their MAC address. This gives rise to a problem and that's when we swap the harddrive from one computer to another, the MAC address becomes different and the application we are running on the harddrive has problem getting the right static IP for it to work. We can't configure the IP address in the application all the time. And changing the static IP addresses to re-map to the computer's new MAC address can be quite a pain. Since all the computers have a unique computer name as their hostname, is it possible to configure such that when these computers grab IP addresses from the DHCP server, DHCP will learn about their hostname and assign the correct IP address? This is to say, the static IP is mapped to the computers' hostname instead of their MAC address. All the computers are running on Windows 7. Would this be possible? If so how should I go about do this?

    Read the article

  • Apache Virtualhost entry with Windows hostname

    - by gshauger
    I have a Windows Domain Controller and we use it for DNS for our internal network. I have an Ubuntu box with an IP address of 172.16.34.149. Within the Windows DNS I created the forward and reverse lookup entries for the name Endymion. Naturally when ever I FTP/SSH/HTTP/etc to the hostname Endymion it resolves correctly to my Ubuntu box. I wanted to do some web development on this box for an existing site. There were problems when I placed the website in a subfolder of /var/www/. Let's just say it was in folder /var/www/projectx/. The issue involved the incorrect resolution of non-relative urls. So I figure I could create a new DNS entry for the hostname projectx. Sure enough when I FTP/SSH/HTTP/etc to the hostname projectx it takes me to the same ubuntu box as the hostname Endymion...this is what I would expect. I now have two hostnames for the same box. I then create a Virtualhost entry in httpd.conf that looks like the following: <VirtualHost *:80> DocumentRoot /var/www/projectx ServerName projectx ServerAlias projectx </VirtualHost> Sure enough when I go to a browser and type in http://projectx/ it takes me to the correct subfolder. Everything works!!! Not so fast. I then go to http://endymion/ and instead of taking me to /var/www/ it takes me to /var/www/projectx/ Clearly I'm missing something. Help please! ;)

    Read the article

  • How expensive is a hostname in htaccess? Other solutions possible?

    - by Nanne
    For easy allow or disallowing of dynamic IP-adresses you can add them as a hostname in a .htaccess file. As I have read from: .htaccess allow from hostname? it does a reverse lookup on the connecting ip address, seeing if the response matches the allowed name. (Well, actually Apache is doing a double lookup, first a reverse lookup and then a forward lookup on the result of the reverse.) This is the reason we are currently not using dynamic-ip hostnames in the .htaccess: this "sounds" quite heavy: 2 extra lookups for every request. Is this indeed quite heavy, and would a reasonably busy server that is rather looking for less then more load get away with this :)? (e.g.: how does this 'load' compare to the rest? If a request is 1000 times more expensive then the lookups it might be negligible. otoh, it could be that final straw :) ) Are there other solutions? I can write a script that does a lookup of the hostname and put it in .htaccess files ofcourse, but this feels a bit like a hack.

    Read the article

  • How to set up a server without a hosting control panel

    - by A4J
    I have always used a control panel on my dedicated servers - from cPanel to Plesk to Virtualmin, and I am now considering ditching a CP altogether and manually editing config files. My requirements are fairly simple, I will host multiple sites on the server; some Apache with PHP & Mysql and some Passenger with Rails & Postgres. All will require email smtp/pop. FTP/Stats will not be required. Could someone please give me a quick run-down of what I would need to do - in terms of installing software and configuration? My server will come with a base install of CentOS 6.4 minimal. My thoughts so far: Install/update latest versions of MySQL & Postgres (are they 'safe' out of the box? Or do I need to do anything else like set up root passwords etc?) Install Apache & PHP (again, are the base installs good to go or do they require security tweaks?) Set up nameservers/hostnames/reverse DNS etc (Any guides on how to do this please?) Install Rubygems Install and configure Dovecot and Postfix (any tips on doing this? Or links to how-tos that cover it please?) Set up each website - any links to guides on how to do this? Install/configure firewall (or is the default install good to go?) Any other tips or advice would be greatly appreciated, as would links to guides or how-tos.

    Read the article

  • Apache virtual host does not work properly

    - by Jori
    I have read a lot of information all over the Internet regarding this subject, and can not figure out what I'am doing wrong. I'm trying to host two websites under different names locally under Windows 7 with Apaches Virtual Hosting functionality. This is what I have done already: In the httpd.conf file I uncommented the following line, so that the virtual host configuration file will be included in the main configuration sequence. # Virtual hosts Include conf/extra/httpd-vhosts.conf This is how I edited my httpd-vhosts.conf: # # Virtual Hosts # # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.2/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # NameVirtualHost *:80 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # #<VirtualHost *:80> # ServerAdmin [email protected] # DocumentRoot "C:/apache/docs/dummy-host.localhost" # ServerName dummy-host.localhost # ServerAlias www.dummy-host.localhost # ErrorLog "logs/dummy-host.localhost-error.log" # CustomLog "logs/dummy-host.localhost-access.log" common #</VirtualHost> # #<VirtualHost *:80> # ServerAdmin [email protected] # DocumentRoot "C:/apache/docs/dummy-host2.localhost" # ServerName dummy-host2.localhost # ErrorLog "logs/dummy-host2.localhost-error.log" # CustomLog "logs/dummy-host2.localhost-access.log" common #</VirtualHost> <VirtualHost *:80> ServerName arterieur DocumentRoot "J:/webcontent/www20" <Directory "J:/webcontent/www20"> Order allow,deny Allow from all </Directory> </VirtualHost> As you can see I commented the Virtual Host examples out and added my own one (I did one for this example). Also am I sure that J:\webcontent\www20 exists. At last I edited the Windows host file located in: C:\Windows\System32\drivers\etc\hosts, now it looks this: # Copyright (c) 1993-2009 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host # localhost name resolution is handled within DNS itself. # 127.0.0.1 localhost # ::1 localhost 127.0.0.1 arterieur Then I restarted Apache with the Apache Service Monitor, and it gave me the following fatal error: The requested operation has failed!, I tried to look at the apache/logs/error.log file but I did not log anything, I guess it only logs the errors after startup. Does anyone knows what I'am doing wrong?

    Read the article

  • virtual host not working in windows7 xampp

    - by K.B Panamaldeniya-littletipz
    hi i am using windows7 and xampp , i want to create a virtual host . so i added 127.0.0.1 myawesomeproject to my C:\Windows\System32\drivers\etc\hosts like this # Copyright (c) 1993-2009 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host # localhost name resolution is handled within DNS itself. 127.0.0.1 localhost 127.0.0.1 myawesomeproject ::1 localhost and i added some lines to C:\xampp\apache\conf\extra\httpd-vhosts.conf like this # # Virtual Hosts # # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.2/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # NameVirtualHost *:80 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # ##<VirtualHost *:80> ##ServerAdmin [email protected] ##DocumentRoot "C:/xampp/htdocs/dummy-host.localhost" ##ServerName dummy-host.localhost ##ServerAlias www.dummy-host.localhost ##ErrorLog "logs/dummy-host.localhost-error.log" ##CustomLog "logs/dummy-host.localhost-access.log" combined ##</VirtualHost> ##<VirtualHost *:80> ##ServerAdmin [email protected] ##DocumentRoot "C:/xampp/htdocs/dummy-host2.localhost" ##ServerName dummy-host2.localhost ##ServerAlias www.dummy-host2.localhost ##ErrorLog "logs/dummy-host2.localhost-error.log" ##CustomLog "logs/dummy-host2.localhost-access.log" combined ##</VirtualHost> <VirtualHost *> DocumentRoot "C:\xampp\htdocs" ServerName localhost </VirtualHost> <VirtualHost *> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot c:\myawesomeproject ServerName localhost <Directory "c:\myawesomeproject"> Order allow,deny Allow from all </Directory> </VirtualHost> i created a folder called myawesomeproject in my c drive . when i type http://myawesomeproject it is rederecting to http://myawesomeproject/xampp i added another folder 'test' inside myawesomeproject . so the path to 'test' is C:/myawesomeproject/test . the problem is when i type http://myawesomeproject/test it gives an error. it says Object not found! The requested URL was not found on this server. If you entered the URL manually please check your spelling and try again. If you think this is a server error, please contact the webmaster. Error 404 myawesomeproject 8/22/2011 4:30:29 PM Apache/2.2.17 (Win32) mod_ssl/2.2.17 OpenSSL/0.9.8o PHP/5.3.4 mod_perl/2.0.4 Perl/v5.10.1 why is this . how can i create a virtual host........................ :(

    Read the article

  • Running multiple instances of tomcat in eclipse WTP

    - by lisak
    Hey, SCENARIO: 10 CATALINA_BASEs with own configuration (always the same port numbers 8080, but 10 different IP/hostnames on one host via virtual IPs). created a server in WTP and pick "Use the custom location" option in the server configuration in eclipse. New configuration files are created in workspace/Server/server-name-config/ Set up the server path and deploy path for my catalina base (not the internal .metadata one) After I started it, the new configuration files overwrote the original catalina-base/conf files I had there - I was glad, it should be like this but after I made changes in the eclipse config files workspace/Server/server-name-config/ and restarted the server, the changes didn't appeared in the original files in CATALINA_BASE/conf What the hell is that ? So I set the CATALINA_BASE/conf/server.xml to fault configuration and restarted tomcat from eclipse and it worked ! it took the configuration from /Server/server-name-config/server.xml Then I deleted CATALINA_BASE/conf/server.xml and it said that there is no server.xml in catalina base ! How is it possible ? I don't understand why eclipse WTP developers made so tight integration. There should by just symbolic links in /Server/server-name-config/ pointing to CATALINA_BASE/conf/ ... now there is a weird system which is totally unpredictable. The changes in /Server/server-name-config/ are not reflected in CATALINA_BASE/conf ... from where the standard bootstrap.jar or other catalina classloaders and classes build server, engine and other objects with particular setting. Moreover the CATALINA_BASEs could be used outside eclipse then. The second problem, I'm setting up various things in CATALINA_BASE/bin/startup.sh and setenv.sh which is easy cause I can use bash for it. Is then modifying VM parameters in the "Open launch configuration" settings the only way how to do it in eclipse ? Sorry for such a huge pile of questions, but I'm annoyed by the fact that it is much better to not use eclipse WTP for this because it is very poorly designed and it's a shame because this would spare me a lot of time. And using the internal .metadata/ instances it's even more terrifying way that the one I described.

    Read the article

  • Auditing front end performance on web application

    - by user1018494
    I am currently trying to performance tune the UI of a company web application. The application is only ever going to be accessed by staff, so the speed of the connection between the server and client will always be considerably more than if it was on the internet. I have been using performance auditing tools such as Y Slow! and Google Chrome's profiling tool to try and highlight areas that are worth targeting for investigation. However, these tools are written with the internet in mind. For example, the current suggestions from a Google Chrome audit of the application suggests is as follows: Network Utilization Combine external CSS (Red warning) Combine external JavaScript (Red warning) Enable gzip compression (Red warning) Leverage browser caching (Red warning) Leverage proxy caching (Amber warning) Minimise cookie size (Amber warning) Parallelize downloads across hostnames (Amber warning) Serve static content from a cookieless domain (Amber warning) Web Page Performance Remove unused CSS rules (Amber warning) Use normal CSS property names instead of vendor-prefixed ones (Amber warning) Are any of these bits of advice totally redundant given the connection speed and usage pattern? The users will be using the application frequently throughout the day, so it doesn't matter if the initial hit is large (when they first visit the page and build their cache) so long as a minimal amount of work is done on future page views. For example, is it worth the effort of combining all of our CSS and JavaScript files? It may speed up the initial page view, but how much of a difference will it really make on subsequent page views throughout the working day? I've tried searching for this but all I keep coming up with is the standard internet facing performance advice. Any advice on what to focus my performance tweaking efforts on in this scenario, or other auditing tool recommendations, would be much appreciated.

    Read the article

  • Managing server instance identity on EC2

    - by kikibobo
    I recently brought up a cluster on EC2, and I felt like I had to invent a lot of things. I'm wondering what kinds of tools, patterns, ideas are out there for how to deal with this. Some context: I had 3 different kinds of servers, so first I created AMIs for each of them. The first AMI had zookeeper, so step one in deploying the system was to get the zookeeper server running. My script then made a note of the mapping between EC2's completely arbitrary and unpredictable hostnames, and the zookeeper server. Then as I brought up new instances of the other 2 kinds of servers, the first thing I would do is ssh to the new server, and add the zookeeper server to its /etc/hosts file. Then as the server software on each instance starts up, it can find zookeeper. Obviously this is a problem that lots of people have to solve, and it probably works a little bit differently in different clouds. Are there products that address this concept? I was pretty surprised that EC2 didn't provide some kind of way to tie your own name to its name. Thanks for any ideas.

    Read the article

  • Errors when switching to specific static IP

    - by michaelc
    I had a Fedora box running using my static IP 69.169.136.6, etc, all configured according to what the ISP required. Just recently the hard drive failed (and I should have been keeping better backups) - while it is being recovered I would like to put up a webpage on my Archlinux PC explaining the problem - I presently do not have sufficient access to change the DNS record assigned to the domain. When I change my ip address while my system is running to 69.169.136.6, ifconfig reports the new ip address, but http://whatismyip.com/ does not. When I change it and reboot, I can't ping - the message I recieve is "connect: Network is unreachable" (when given one of google.com 's IP addresses - hostnames give me ping: unknown host xxx). Until I have access to the DNS system, what can I do to make this work? Edit: With new IP address, same problem, IP is now 69.169.136.29. Some commands might be useful: #ping 69.169.136.1 PING 69.169.136.1 (69.169.136.1) 56(84) bytes of data. 64 bytes from 69.169.136.1: icmp_seq=1 ttl=64 time=0.377 ms #ping 69.169.190.211 connect: Network is unreachable #ping 208.72.160.67 connect: Network is unreachable #ifconfig eth0 Link encap:Ethernet HWaddr 00:E0:4D:97:23:9B inet addr:69.169.136.29 Bcast:69.169.137.255 Mask:255.255.254.0 inet6 addr: fe80::2e0:4dff:fe97:239b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:132091 errors:0 dropped:0 overruns:0 frame:0 TX packets:17 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9635179 (9.1 Mb) TX bytes:1322 (1.2 Kb) Interrupt:29 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:48 errors:0 dropped:0 overruns:0 frame:0 TX packets:48 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2480 (2.4 Kb) TX bytes:2480 (2.4 Kb) #ip route 69.169.136.0/23 dev eth0 proto kernel scope link src 69.169.136.29 #cat /etc/resolv.conf # Generated by dhcpcd #nameserver 208.67.222.222 #nameserver 208.67.220.220 nameserver 69.169.190.211 nameserver 208.72.160.67 # /etc/resolv.conf.tail can replace this line Update: have new static IP addresses, verified to work in Windows... Relevant portions of /etc/rc.conf below: #Static IP example #eth0="eth0 69.169.136.6 netmask 255.255.254.0 broadcast 69.169.136.1" #eth0="eth0 69.169.136.29 netmask 255.255.254.0 broadcast 69.169.137.255" eth0="eth0 69.169.136.32 netmask 255.255.254.0 broadcast 69.169.137.255" #eth0="dhcp" INTERFACES=(eth0) # Routes to start at boot-up (in this order) # Declare each route then list in ROUTES # - prefix an entry in ROUTES with a ! to disable it # #gateway="default gw 192.168.0.1" gateway="default gw 69.169.136.1" #gateway="69.169.136.1" ROUTES=(!gateway) #ROUTES=()

    Read the article

  • Linux Mint 10 LXDE computer to act as LTSP Server without luck

    - by Rautamiekka
    So I've tried to make our screen-broken HP laptop to also serve as LTSP Server in addition to various other tasks, without luck, which may be cuz I'm running LM10 LXDE while the instructions are for Ubuntu. Excuse my ignorance. The entire output from Terminal after installing LTSP stuff along with a Server kernel and a load of other packages: administrator@rauta-mint-turion ~ $ sudo lt ltrace ltsp-build-client ltsp-chroot ltspfs ltspfsmounter ltsp-info ltsp-localapps ltsp-update-image ltsp-update-kernels ltsp-update-sshkeys administrator@rauta-mint-turion ~ $ sudo ltsp-update-sshkeys administrator@rauta-mint-turion ~ $ sudo ltsp-update-kernels find: `/opt/ltsp/': No such file or directory administrator@rauta-mint-turion ~ $ sudo ltsp-build-client /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging: line 3: /opt/ltsp/i386/etc/ltsp_chroot: No such file or directory error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ sudo ltsp-update-image Cannot determine assigned port. Assigning to port 2000. mkdir: cannot create directory `/opt/ltsp/i386/etc/ltsp': No such file or directory /usr/sbin/ltsp-update-image: 274: cannot create /opt/ltsp/i386/etc/ltsp/update-kernels.conf: Directory nonexistent /usr/sbin/ltsp-update-image: 274: cannot create /opt/ltsp/i386/etc/ltsp/update-kernels.conf: Directory nonexistent Regenerating kernel... chroot: failed to run command `/usr/share/ltsp/update-kernels': No such file or directory Done. Configuring inetd... Done. Updating pxelinux default configuration...Done. Skipping invalid chroot: /opt/ltsp/i386 chroot: failed to run command `test': No such file or directory administrator@rauta-mint-turion ~ $ sudo ltsp-chroot chroot: failed to run command `/bin/bash': No such file or directory administrator@rauta-mint-turion ~ $ bash administrator@rauta-mint-turion ~ $ exit exit administrator@rauta-mint-turion ~ $ sudo ls /opt/ltsp i386 administrator@rauta-mint-turion ~ $ sudo ls /opt/ltsp/i386/ administrator@rauta-mint-turion ~ $ sudo ltsp-build-client NOTE: Root directory /opt/ltsp/i386 already exists, this will lead to problems, please remove it before trying again. Exiting. error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ sudo rm -rv /opt/ltsp/i386 removed directory: `/opt/ltsp/i386' administrator@rauta-mint-turion ~ $ sudo ltsp-build-client /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging: line 3: /opt/ltsp/i386/etc/ltsp_chroot: No such file or directory error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ aptitude search ltsp p fts-ltsp-ldap - LDAP LTSP module for the TFTP/Fuse supplicant p ltsp-client - LTSP client environment p ltsp-client-core - LTSP client environment (core) p ltsp-cluster-accountmanager - Account creation and management daemon for LTSP p ltsp-cluster-control - Web based thin-client configuration management p ltsp-cluster-lbagent - LTSP loadbalancer agent offers variables about the state of the ltsp server p ltsp-cluster-lbserver - LTSP loadbalancer server returns the optimal ltsp server to terminal p ltsp-cluster-nxloadbalancer - Minimal NX loadbalancer for ltsp-cluster p ltsp-cluster-pxeconfig - LTSP-Cluster symlink generator p ltsp-controlaula - Classroom management tool with ltsp clients p ltsp-docs - LTSP Documentation p ltsp-livecd - starts an LTSP live server on an Ubuntu livecd session p ltsp-manager - Ubuntu LTSP server management GUI i A ltsp-server - Basic LTSP server environment i ltsp-server-standalone - Complete LTSP server environment i A ltspfs - Fuse based remote filesystem for LTSP thin clients p ltspfsd - Fuse based remote filesystem hooks for LTSP thin clients p ltspfsd-core - Fuse based remote filesystem daemon for LTSP thin clients p python-ltsp - provides ltsp related functions administrator@rauta-mint-turion ~ $ sudo aptitude purge ltsp-server ltsp-server-standalone ltspfs The following packages will be REMOVED: debconf-utils{u} debootstrap{u} dhcp3-server{u} gstreamer0.10-pulseaudio{u} ldm-server{u} libpulse-browse0{u} ltsp-server{p} ltsp-server-standalone{p} ltspfs{p} nbd-server{u} openbsd-inetd{u} pulseaudio{u} pulseaudio-esound-compat{u} pulseaudio-module-x11{u} pulseaudio-utils{u} squashfs-tools{u} tftpd-hpa{u} 0 packages upgraded, 0 newly installed, 17 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 6,996kB will be freed. Do you want to continue? [Y/n/?] (Reading database ... 158454 files and directories currently installed.) Removing ltsp-server-standalone ... Purging configuration files for ltsp-server-standalone ... Removing ltsp-server ... Purging configuration files for ltsp-server ... dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot/ltsp' not empty so not removed. dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot' not empty so not removed. Processing triggers for man-db ... (Reading database ... 158195 files and directories currently installed.) Removing debconf-utils ... Removing debootstrap ... Removing dhcp3-server ... * Stopping DHCP server dhcpd3 [ OK ] Removing gstreamer0.10-pulseaudio ... Removing ldm-server ... Removing pulseaudio-module-x11 ... Removing pulseaudio-esound-compat ... Removing pulseaudio ... * PulseAudio configured for per-user sessions Removing pulseaudio-utils ... Removing libpulse-browse0 ... Processing triggers for man-db ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 157944 files and directories currently installed.) Removing ltspfs ... Processing triggers for man-db ... (Reading database ... 157932 files and directories currently installed.) Removing nbd-server ... Stopping Network Block Device server: nbd-server. Removing openbsd-inetd ... * Stopping internet superserver inetd [ OK ] Removing squashfs-tools ... Removing tftpd-hpa ... tftpd-hpa stop/waiting Processing triggers for ureadahead ... Processing triggers for man-db ... administrator@rauta-mint-turion ~ $ sudo aptitude purge ~c The following packages will be REMOVED: dhcp3-server{p} libpulse-browse0{p} nbd-server{p} openbsd-inetd{p} pulseaudio{p} tftpd-hpa{p} 0 packages upgraded, 0 newly installed, 6 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Do you want to continue? [Y/n/?] (Reading database ... 157881 files and directories currently installed.) Removing dhcp3-server ... Purging configuration files for dhcp3-server ... Removing libpulse-browse0 ... Purging configuration files for libpulse-browse0 ... Removing nbd-server ... Purging configuration files for nbd-server ... Removing openbsd-inetd ... Purging configuration files for openbsd-inetd ... Removing pulseaudio ... Purging configuration files for pulseaudio ... Removing tftpd-hpa ... Purging configuration files for tftpd-hpa ... Processing triggers for ureadahead ... administrator@rauta-mint-turion ~ $ sudo aptitude install ltsp-server-standalone The following NEW packages will be installed: debconf-utils{a} debootstrap{a} ldm-server{a} ltsp-server{a} ltsp-server-standalone ltspfs{a} nbd-server{a} openbsd-inetd{a} squashfs-tools{a} The following packages are RECOMMENDED but will NOT be installed: dhcp3-server pulseaudio-esound-compat tftpd-hpa 0 packages upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/498kB of archives. After unpacking 2,437kB will be used. Do you want to continue? [Y/n/?] Preconfiguring packages ... Selecting previously deselected package openbsd-inetd. (Reading database ... 157868 files and directories currently installed.) Unpacking openbsd-inetd (from .../openbsd-inetd_0.20080125-4ubuntu2_i386.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... Setting up openbsd-inetd (0.20080125-4ubuntu2) ... * Stopping internet superserver inetd [ OK ] * Starting internet superserver inetd [ OK ] Selecting previously deselected package ldm-server. (Reading database ... 157877 files and directories currently installed.) Unpacking ldm-server (from .../ldm-server_2%3a2.1.3-0ubuntu1_all.deb) ... Selecting previously deselected package debconf-utils. Unpacking debconf-utils (from .../debconf-utils_1.5.32ubuntu3_all.deb) ... Selecting previously deselected package debootstrap. Unpacking debootstrap (from .../debootstrap_1.0.23ubuntu1_all.deb) ... Selecting previously deselected package nbd-server. Unpacking nbd-server (from .../nbd-server_1%3a2.9.14-2ubuntu1_i386.deb) ... Selecting previously deselected package squashfs-tools. Unpacking squashfs-tools (from .../squashfs-tools_1%3a4.0-8_i386.deb) ... Selecting previously deselected package ltsp-server. GNU nano 2.2.4 File: /etc/ltsp/ltsp-update-image.conf # Configuration file for ltsp-update-image # By default, do not compress the image # as it's reported to make it unstable NO_COMP="-noF -noD -noI -no-exports" [ Switched to /etc/ltsp/ltsp-update-image.conf ] administrator@rauta-mint-turion ~ $ ls /opt/ firefox/ ltsp/ mint-flashplugin/ administrator@rauta-mint-turion ~ $ ls /opt/ltsp/i386/ administrator@rauta-mint-turion ~ $ ls /opt/ltsp/ i386 administrator@rauta-mint-turion ~ $ sudo ltsp ltsp-build-client ltsp-chroot ltspfs ltspfsmounter ltsp-info ltsp-localapps ltsp-update-image ltsp-update-kernels ltsp-update-sshkeys administrator@rauta-mint-turion ~ $ sudo ltsp-build-client NOTE: Root directory /opt/ltsp/i386 already exists, this will lead to problems, please remove it before trying again. Exiting. error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ ^C administrator@rauta-mint-turion ~ $ sudo aptitude purge ltsp ltspfs ltsp-server ltsp-server-standalone administrator@rauta-mint-turion ~ $ sudo aptitude purge ltsp-server The following packages will be REMOVED: ltsp-server{p} 0 packages upgraded, 0 newly installed, 1 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 1,073kB will be freed. The following packages have unmet dependencies: ltsp-server-standalone: Depends: ltsp-server but it is not going to be installed. The following actions will resolve these dependencies: Remove the following packages: 1) ltsp-server-standalone Accept this solution? [Y/n/q/?] The following packages will be REMOVED: debconf-utils{u} debootstrap{u} ldm-server{u} ltsp-server{p} ltsp-server-standalone{a} ltspfs{u} nbd-server{u} openbsd-inetd{u} squashfs-tools{u} 0 packages upgraded, 0 newly installed, 9 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 2,437kB will be freed. Do you want to continue? [Y/n/?] (Reading database ... 158244 files and directories currently installed.) Removing ltsp-server-standalone ... (Reading database ... 158240 files and directories currently installed.) Removing ltsp-server ... Purging configuration files for ltsp-server ... dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot/ltsp' not empty so not removed. dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot' not empty so not removed. Processing triggers for man-db ... (Reading database ... 157987 files and directories currently installed.) Removing debconf-utils ... Removing debootstrap ... Removing ldm-server ... Removing ltspfs ... Removing nbd-server ... Stopping Network Block Device server: nbd-server. Removing openbsd-inetd ... * Stopping internet superserver inetd [ OK ] Removing squashfs-tools ... Processing triggers for man-db ... Processing triggers for ureadahead ... administrator@rauta-mint-turion ~ $ sudo aptitude purge ~c The following packages will be REMOVED: ltsp-server-standalone{p} nbd-server{p} openbsd-inetd{p} 0 packages upgraded, 0 newly installed, 3 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Do you want to continue? [Y/n/?] (Reading database ... 157871 files and directories currently installed.) Removing ltsp-server-standalone ... Purging configuration files for ltsp-server-standalone ... Removing nbd-server ... Purging configuration files for nbd-server ... Removing openbsd-inetd ... Purging configuration files for openbsd-inetd ... Processing triggers for ureadahead ... administrator@rauta-mint-turion ~ $ sudo rm -rv /var/lib/t teamspeak-server/ tftpboot/ transmission-daemon/ administrator@rauta-mint-turion ~ $ sudo rm -rv /var/lib/tftpboot removed `/var/lib/tftpboot/ltsp/i386/pxelinux.cfg/default' removed directory: `/var/lib/tftpboot/ltsp/i386/pxelinux.cfg' removed directory: `/var/lib/tftpboot/ltsp/i386' removed directory: `/var/lib/tftpboot/ltsp' removed directory: `/var/lib/tftpboot' administrator@rauta-mint-turion ~ $ sudo find / -name "ltsp" /opt/ltsp administrator@rauta-mint-turion ~ $ sudo rm -rv /opt/ltsp removed directory: `/opt/ltsp/i386' removed directory: `/opt/ltsp' administrator@rauta-mint-turion ~ $ sudo aptitude install ltsp-server-standalone The following NEW packages will be installed: debconf-utils{a} debootstrap{a} ldm-server{a} ltsp-server{a} ltsp-server-standalone ltspfs{a} nbd-server{a} openbsd-inetd{a} squashfs-tools{a} The following packages are RECOMMENDED but will NOT be installed: dhcp3-server pulseaudio-esound-compat tftpd-hpa 0 packages upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/498kB of archives. After unpacking 2,437kB will be used. Do you want to continue? [Y/n/?] Preconfiguring packages ... Selecting previously deselected package openbsd-inetd. (Reading database ... 157868 files and directories currently installed.) Unpacking openbsd-inetd (from .../openbsd-inetd_0.20080125-4ubuntu2_i386.deb) ... Processing triggers for man-db ... GNU nano 2.2.4 New Buffer GNU nano 2.2.4 File: /etc/ltsp/dhcpd.conf # # Default LTSP dhcpd.conf config file. # authoritative; subnet 192.168.2.0 netmask 255.255.255.0 { range 192.168.2.70 192.168.2.79; option domain-name "jarvinen"; option domain-name-servers 192.168.2.254; option broadcast-address 192.168.2.255; option routers 192.168.2.254; # next-server 192.168.0.1; # get-lease-hostnames true; option subnet-mask 255.255.255.0; option root-path "/opt/ltsp/i386"; if substring( option vendor-class-identifier, 0, 9 ) = "PXEClient" { filename "/ltsp/i386/pxelinux.0"; } else { filename "/ltsp/i386/nbi.img"; } } [ Wrote 22 lines ] administrator@rauta-mint-turion ~ $ sudo service dhcp3-server start * Starting DHCP server dhcpd3 [ OK ] administrator@rauta-mint-turion ~ $ sudo ltsp-build-client /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging: line 3: /opt/ltsp/i386/etc/ltsp_chroot: No such file or directory error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ sudo cat /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging case "$MODE" in after-install) echo LTSP_CHROOT=$ROOT >> $ROOT/etc/ltsp_chroot ;; esac administrator@rauta-mint-turion ~ $ cd $ROOT/etc/ltsp_chroot bash: cd: /etc/ltsp_chroot: No such file or directory administrator@rauta-mint-turion ~ $ cd $ROOT/etc/ administrator@rauta-mint-turion /etc $ ls acpi chatscripts emacs group insserv.conf.d logrotate.conf mysql php5 rc6.d smbnetfs.conf UPower adduser.conf ConsoleKit environment group- iproute2 logrotate.d nanorc phpmyadmin rc.local snmp usb_modeswitch.conf alternatives console-setup esound grub.d issue lsb-base nbd-server pm rcS.d sound usb_modeswitch.d anacrontab cron.d firefox gshadow issue.net lsb-base-logging.sh ndiswrapper pnm2ppa.conf request-key.conf ssh ushare.conf apache2 cron.daily firefox-3.5 gshadow- java lsb-release netscsid.conf polkit-1 resolvconf ssl vga apm cron.hourly firestarter gtk-2.0 java-6-sun ltrace.conf network popularity-contest.conf resolv.conf sudoers vim apparmor cron.monthly fonts gtkmathview kbd ltsp NetworkManager ppp rmt sudoers.d vlc apparmor.d crontab foomatic gufw kernel lxdm networks printcap rpc su-to-rootrc vsftpd.conf apport cron.weekly fstab hal kernel-img.conf magic nsswitch.conf profile rsyslog.conf sweeprc w3m apt crypttab ftpusers hdparm.conf kerneloops.conf magic.mime ntp.conf profile.d rsyslog.d sysctl.conf wgetrc at.deny cups fuse.conf host.conf kompozer mailcap obex-data-server protocols samba sysctl.d wildmidi auto-apt dbconfig-common gai.conf hostname ldap mailcap.order ODBCDataSources psiconv sane.d teamspeak-server wodim.conf avahi dbus-1 gamin hosts ld.so.cache manpath.config odbc.ini pulse screenrc terminfo wpa_supplicant bash.bashrc debconf.conf gconf hosts.allow ld.so.conf menu openal purple securetty thunderbird X11 bash_completion debian_version gdb hosts.deny ld.so.conf.d menu-methods openoffice python security timezone xdg bash_completion.d default gdm hp legal mime.types opt python2.6 sensors3.conf transmission-daemon xml bindresvport.blacklist defoma ghostscript ifplugd lftp.conf mke2fs.conf pam.conf python2.7 sensors.d ts.conf xulrunner-1.9.2 blkid.conf deluser.conf gimp inetd.conf libpaper.d modprobe.d pam.d python3.1 services ucf.conf zsh_command_not_found blkid.tab depmod.d gnome init libreoffice modules pango rc0.d sgml udev bluetooth dhcp gnome-system-tools init.d linuxmint motd papersize rc1.d shadow ufw bonobo-activation dhcp3 gnome-vfs-2.0 initramfs-tools locale.alias mplayer passwd rc2.d shadow- updatedb.conf ca-certificates dictionaries-common gnome-vfs-mime-magic inputrc localtime mtab passwd- rc3.d shells update-manager ca-certificates.conf doc-base gre.d insserv logcheck mtab.fuselock pcmcia rc4.d skel update-motd.d calendar dpkg groff insserv.conf login.defs mtools.conf perl rc5.d smb2www update-notifier administrator@rauta-mint-turion /etc $ cd ltsp/ administrator@rauta-mint-turion /etc/ltsp $ ls dhcpd.conf ltsp-update-image.conf administrator@rauta-mint-turion /etc/ltsp $ cat dhcpd.conf # # Default LTSP dhcpd.conf config file. # authoritative; subnet 192.168.2.0 netmask 255.255.255.0 { range 192.168.2.70 192.168.2.79; option domain-name "jarvinen"; option domain-name-servers 192.168.2.254; option broadcast-address 192.168.2.255; option routers 192.168.2.254; # next-server 192.168.0.1; # get-lease-hostnames true; option subnet-mask 255.255.255.0; option root-path "/opt/ltsp/i386"; if substring( option vendor-class-identifier, 0, 9 ) = "PXEClient" { filename "/ltsp/i386/pxelinux.0"; } else { filename "/ltsp/i386/nbi.img"; } } administrator@rauta-mint-turion /etc/ltsp $

    Read the article

< Previous Page | 2 3 4 5 6 7 8  | Next Page >